Information Systems Jobs in Kuwait

<p><h4>Principal Accountabilities:</h4> <p>Performs design work for new construction, renovations and improvement projects for real property facilities.<br> Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards.<br> Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers.<br> Develops cost estimates and time schedules. Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy.<br> Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from contractors.<br> Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering.<br> Responsible for the correct and efficient execution of assigned work involving the installation, removal, inspection, maintenance and repair of all electrical systems, distribution systems and fixtures.<br> Supervises and coordinates activities of workers engaged in the assembly, installation and repair of electrical cables, systems power distribution systems, distribution panels, inspections, etc.<br> Secures the cooperation of other crafts/trades supervisors and instills within the assigned electrical staff the cooperative attitude necessary for working closely with other maintenance trade workers.<br> May at times be obligated to perform actual maintenance and repair work.<br> Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.<br> Performs other qualified duties as assigned.<br> Living and working conditions at the assignment location could be remote and uncomfortable.<br> Long hours, exposure to weather and hazardous conditions.<br> Personnel should be aware of moving on short notice and under adverse conditions.<br> Ability to travel domestically and internationally.</p> <h4>Minimum Requirements:</h4> <p>Must be a degreed electrical engineer (licensed electrical engineer is preferred).<br> Minimum four (4) years of design experience and be capable of complete design and investigative services including electric power distribution networks, power load determination, exterior electric, interior electric, fire alarm systems, and site lighting.<br> Should have experience in controls systems designs.<br> Must be proficient in AutoCAD 2012 or later and have experience with power system analysis software.<br> Must be able to obtain and maintain a Secret US Government Clearance. Note: US citizenship is required to obtain a Secret Clearance.</p> <h4>Preferred Qualifications:</h4> <p>Excellent communications, effective leadership and interpersonal skills.<br> Capable of complete design services including electric power distribution networks, power load determination, exterior electric, interior electric, and site lighting.<br> Working knowledge of design review, project mobilization, quality compliance, QA, safety, project controls, and capture management.<br> Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution.<br> Computer literate; can use Microsoft Office and Project, etc.<br> Additional knowledge/skills may be required by contract or assignment.</p></p><p></p>

<ul><li>Execute installation, testing, and commissioning of electrical systems and equipment according to design specifications and safety standards.</li><li>Perform routine maintenance, troubleshooting, and repair of electrical machinery, control panels, and power distribution systems to ensure operational continuity.</li><li>Read and interpret electrical schematics, blueprints, and technical manuals to diagnose faults and plan repair strategies.</li><li>Assist in the design and modification of electrical circuits and control systems, ensuring compliance with project requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Electrical Engineering from a recognized technical institute.</li><li>Possession of relevant professional certifications, such as ETT or equivalent.</li><li>Minimum of 2-3 years of hands-on experience in industrial electrical maintenance or installation.</li><li>Proficiency in reading and understanding electrical schematics, single-line diagrams, and P&IDs.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Diagnose and repair heating, ventilation, and air conditioning (HVAC) systems to ensure optimal functionality and efficiency.</li><li>Perform routine maintenance checks on HVAC systems to prevent breakdowns and extend equipment lifespan.</li><li>Install new HVAC units and components according to industry standards and manufacturer specifications.</li><li>Calibrate and fine-tune HVAC equipment to optimize performance and energy efficiency.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent; technical training in HVAC systems is preferred.</li><li>HVAC certification from an accredited institution, showcasing expertise in the field.</li><li>A minimum of 2 years of hands-on experience in HVAC installation and repair, demonstrating practical skills.</li><li>Familiarity with local building codes and regulations, ensuring compliance in all installations.</li></ul><p></p></section>

<p><strong>Job Responsibilities:</strong></p><ul><li>Answering and directing incoming phone calls promptly and professionally.</li><li>Keeping up-to-date with the company’s services, products, and promotions to effectively assist and encourage clients.</li><li>Attending queries and notifying appropriate personnel of visitor arrivals.</li><li>Coordinating mail distribution and handling incoming and outgoing courier services.</li><li>Handling client inquiries through phone calls, WhatsApp, and social media platforms professionally and efficiently.</li><li>Other front desk reception duties include providing information about the company and its services, and directing visitors to the appropriate individuals or departments.</li></ul><p>&nbsp;</p><p><strong>Qualifications &amp; Requirements:</strong></p><ul><li>Previous experience in the medical sector or in a similar role is preferred.</li><li>Knowledge of medical terminology and experience in medical office or clinic settings.</li><li>Ability to maintain patient and client confidentiality.</li><li>Strong organizational, multitasking, and attention to detail skills.</li><li>Excellent interpersonal, communication, and customer service skills.</li><li>Ability to work flexible shifts.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision, plans sourcing of goods and services to support manufacturing, field operations or project management. Complies with and executes Category Management strategy in accordance with policies and procedures. Creates request for quotations (RFQ) or organizes competitive biddings from various suppliers to obtain best quality, delivery and price for goods and services (RFI-request for information/RFP-request for proposal). Implement agreements for local procurement of goods and services not covered under Category Management. Assesses supplier performance and conducts reviews with suppliers. May be responsible for complex operations or large expenditures. May lead in the development of less experienced Procurement Specialists. Job tasks impact cost containment, efficiency, profitability or operations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Undergraduate degree and minimum of 5 years of experience in Oil &amp; Gas industry, includng in a service company</li><li>Advanced procurement certification is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry. Job Duties Entry level for professional work. Performs assignments designed to develop professional or technical work knowledge and abilities requiring application of standard techniques, procedures, and criteria in carrying out a sequence of related tasks. Limited exercise of judgment is required on details of work and in making preliminary selections and adaptations of alternatives. This classification is used for employees performing a designated function for an identified duration.</p><p>Job Details Requisition Number: PHONE_NUMBER Experience Level: Apprenticeship Job Family: Support Services Product Service Line: [[division]] Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Company Details</p><p>Company : Halliburton</p><p>Skills : Student / Recent Grad</p><p>Education : High School/Secondary</p><p>Employment Type : Full Time Salaried Employee</p><p>Location : Al Bid`, AH, Kuwait</p><p>General Requirements / Eligibility Criteria Fresh Engineering Graduates from 2025 &amp; 2026, specializing in Petroleum, Mechanical, Electrical, Electronics, or Industrial Engineering. Minimum cumulative GPA of 2.5 or above. Must be legally authorized to work in the country of application. Relevant internships, volunteer experience, or academic achievements will be considered an advantage. Must be willing to work on rotational schedules, shifts, and stay over at remote rig/well site locations. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Grand Hyatt Kuwait is looking for an Income Auditor who is responsible&nbsp;for auditing hotel revenue.</span></p><br><p><span>This role requires good communication skills, attention to detail and basic accounting skills. Check figures, postings, and documents for accuracy. Record, store, access, and/or analyze computerized financial information. Control and secure cash and cash equivalents for property according to cash handling policy and procedures. Organize, secure, and maintain all files and records in accordance with document retention and confidentiality policies and procedures. Prepare, maintain, and distribute statistical, financial, accounting, auditing, or payroll reports and tables. Audit statistical, financial, accounting, auditing, or payroll reports and tables. Audit and reconcile all revenue postings.&nbsp;</span></p><br><br><b>Qualifications:</b><br><p><span><span>A ponteial candidate will ideally have:</span></span></p><br> <ul> <li> <p><span><span>Degree In Finance is an advantage</span></span></p><br> </li> <li> <p><span><span>Previous accounting experience is preferred</span></span></p><br> </li> <li> <p><span><span>Hotel accounting experience is mandatory</span></span></p><br> </li> <li> <p><span><span>Excellent communication skills</span></span></p><br> </li> <li> <p><span><span>Proficient in Microsoft applications</span></span></p><br> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br> <b>Job Duties</b> <br>Under direct supervision, performs diagnoses, repairs, preventative maintenance, calibration, and inspections on down-hole tool electronics and other equipment used in the application for down-hole tools, including Directional/ RSS and/or M/LWD sensors. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Areas of specialization may include: mechanical aptitude, electronics aptitude, computer skills, assembly and disassembly of Measure While Drilling and/or Logging While Drilling down-hole tools. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Requires a technical school certificate, or equivalent, and a minimum of one year of relevant experience in equipment repair and maintenance. An associate degree or higher is preferred.<br><br><b>Qualifications</b> <br><br><br> <p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Yard 34, East Ahmadi,&nbsp;Ahmadi,&nbsp;Ahmadi,&nbsp;61001, Kuwait</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;<span>204756</span>&nbsp;&nbsp;<br> <strong>Experience Level:&nbsp;</strong>Entry-Level&nbsp;<br> <strong>Job Family:</strong>&nbsp;Support Services&nbsp;<br> <strong>Product Service Line:&nbsp;</strong><span>[[division]]</span>&nbsp;&nbsp;<br> <strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br> Compensation is competitive and commensurate with experience.</p><br> </div>

<p><h4>SOC operations leadership</h4> <p>Lead and oversee 24x7 Security Operations Center (SOC) activities, ensuring continuous monitoring, threat detection, investigation, and incident response. Serve as the primary escalation point for major security incidents and drive timely resolution. Ensure adherence to incident response procedures, runbooks, and escalation protocols. Lead operational decision-making during critical incidents and cyber crisis situations. Monitor SOC performance against defined KPIs and SLAs, driving continuous service improvement.</p> <h4>Stakeholder & client management</h4> <p>Act as the primary interface between SOC teams, clients, and internal leadership. Provide timely and effective communication during security incidents and operational engagements. Align SOC services with business risk priorities, compliance requirements, and client expectations. Support crisis management, incident reporting, and executive-level escalations.</p> <h4>Team leadership & governance</h4> <p>Lead, coach, and develop SOC analysts and team leads. Manage team performance, workforce planning, and capability development initiatives. Foster a culture of accountability, collaboration, and operational excellence. Ensure compliance with organizational security policies, standards, and regulatory requirements.</p> <h4>Qualifications</h4> <p><strong>Required:</strong></p> <ul> <li>Bachelor's degree in cybersecurity, information security, computer science, information technology, or a related field.</li> <li>8+ years of cybersecurity experience, including at least 3 years in a SOC leadership or management role.</li> <li>Strong experience in security operations, incident response, threat detection, and security monitoring.</li> <li>Hands-on experience with SIEM, SOAR, EDR/XDR, and threat intelligence platforms.</li> <li>Proven ability to manage high-severity security incidents and crisis situations.</li> <li>Strong stakeholder management, communication, and leadership skills.</li> </ul> <p><strong>Preferred:</strong></p> <ul> <li>Professional certifications such as CISSP, CISM, GCIH, GCIA, or equivalent.</li> <li>Experience with Microsoft Sentinel, Splunk, QRadar, or similar SIEM technologies.</li> <li>Knowledge of MITRE ATT&CK, NIST Cybersecurity Framework, ISO 27001, and industry best practices.</li> <li>Experience in managed security services (MSSP) environments and cloud security operations.</li> <li>Strong analytical, problem-solving, and decision-making capabilities in fast-paced environments.</li> </ul> <h4>About Accenture</h4> <p>Accenture is a leading global professional services company that helps the world's leading businesses, governments, and other organizations build their digital core, optimize their operations, accelerate revenue growth, and enhance citizen services—creating tangible value at speed and scale. We are a talent- and innovation-led company with approximately 791,000 people serving clients in more than 120 countries. Technology is at the core of change today, and we are one of the world's leaders in helping drive that change, with strong ecosystem relationships. We combine our strength in technology and leadership in cloud, data, and AI with unmatched industry experience, functional expertise, and global delivery capability. Our broad range of services, solutions, and assets across Strategy & Consulting, Technology, Operations, Industry X, and Song, together with our culture of shared success and commitment to creating 360° value, enable us to help our clients reinvent and build trusted, lasting relationships. We measure our success by the 360° value we create for our clients, each other, our shareholders, partners, and communities.</p> <h4>Equal employment opportunity statement</h4> <p>We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, military veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status, or any other basis as protected by applicable law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities.</p></p><p></p>

<p><h4>Job description</h4> <p>The SOC engineer is responsible for the design, implementation, configuration, and continuous optimization of ZainTECH's Security Operations Centre (SOC) technology platforms, ensuring secure, scalable, and resilient security monitoring services for enterprise and government customers across the MENA region.</p> <p>This is a hands-on engineering role focused on designing and maintaining Security Information and Event Management (SIEM), Security Orchestration, Automation and Response (SOAR), and supporting security technologies. The role owns the end-to-end lifecycle of security monitoring capabilities - from onboarding new log sources and developing detection content to automating operational workflows and continuously enhancing SOC performance - while ensuring solutions align with customer requirements, cybersecurity best practices, and operational standards.</p> <h4>Responsibilities</h4> <p><strong>SIEM & security platform engineering</strong><br> Design, implement, configure, and maintain enterprise SIEM and SOAR platforms supporting ZainTECH's Managed Security Services portfolio.<br> Deploy and maintain highly available, scalable, and secure SOC infrastructure across customer environments.<br> Manage platform upgrades, patching, configuration management, and lifecycle activities to ensure platform stability and performance.<br> Ensure SOC technologies remain aligned with operational, security, and customer requirements.</p> <p><strong>Detection engineering & security content</strong><br> Develop, maintain, and optimise SIEM detection content, including correlation rules, dashboards, reports, alerts, watchlists, and use cases.<br> Improve detection capabilities by analysing emerging threats, attack techniques, and operational trends.<br> Reduce false positives through continuous tuning and refinement of detection logic.<br> Map detection capabilities to recognised cybersecurity frameworks such as MITRE ATT&CK.</p> <p><strong>Platform integration & automation</strong><br> Integrate security technologies, cloud platforms, infrastructure, and third-party solutions into the SIEM ecosystem.<br> Develop custom parsers, connectors, and data ingestion mechanisms to support new customer environments.<br> Design and implement SOAR playbooks to automate investigation, enrichment, notification, and response activities.<br> Optimise data collection, normalisation, and event processing to improve operational efficiency.</p> <p><strong>Operational support & continuous improvement</strong><br> Provide technical support to SOC analysts during security investigations and major incident response activities.<br> Troubleshoot platform issues and perform root cause analysis to maintain service availability.<br> Produce technical documentation, implementation guides, and operational runbooks.<br> Identify opportunities to improve SOC maturity through automation, process optimisation, and engineering best practices.<br> Collaborate with cybersecurity consulting, incident response, product management, and delivery teams to continuously enhance Managed Security Services.</p> <h4>Our culture & code of conduct</h4> <p>At ZainTECH, we take pride in a culture built on collaboration, innovation, and uncompromising integrity. We are looking for individuals who share these values and are committed to customer-centricity and ethical excellence. All employees are expected to uphold our code of conduct, which serves as a guiding framework for responsible behavior across everything we do — from how we work with each other to how we engage with clients and partners globally.</p> <h4>Requirements</h4> <ul> <li>3-5 years of hands-on experience designing, implementing, and administering SIEM platforms within enterprise or Managed Security Services environments.</li> <li>Strong experience with one or more SIEM platforms such as Microsoft Sentinel, Splunk Enterprise Security, IBM QRadar, ArcSight, LogRhythm, or Elastic Security.</li> <li>Experience integrating multiple security technologies, including EDR, firewalls, IDS/IPS, cloud security platforms, identity platforms, and threat intelligence feeds.</li> <li>Working knowledge of Windows, Linux, networking, scripting, APIs, and automation technologies.</li> <li>Experience implementing SOAR platforms and security automation workflows.</li> <li>Knowledge of MITRE ATT&CK, threat intelligence integration, and detection engineering principles.</li> <li>Experience supporting enterprise cloud environments including Microsoft Azure, AWS, or Google Cloud Platform.</li> <li>Experience working within a Managed Security Services Provider (MSSP) environment.</li> <li>Bachelor’s degree in Cybersecurity, Information Security, Computer Science, Information Technology, Engineering, or a related field.</li> <li>Security+, CEH or any relevant certification preferred.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Electrical Engineer</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Power Generation</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Maintain and troubleshoot electrical systems in a large-scale power plant.<br></li><li>Perform preventive and corrective maintenance of electrical equipment.<br></li><li>Ensure reliable operation of transformers, switchgear, and motors.<br></li><li>Monitor electrical distribution systems for safe and efficient performance.<br></li><li>Coordinate shutdown and maintenance activities.<br></li><li>Ensure compliance with electrical safety standards and regulations.<br></li><li>Prepare maintenance reports and technical documentation.<br></li><li>Support continuous improvement initiatives for plant reliability.<br></li></ul>Required Skills<br><ul><li>Power Plant Electrical Maintenance – Experience in utility-scale power plants.<br></li><li>High Voltage Systems – Handling HV equipment safely.<br></li><li>Electrical Troubleshooting – Diagnose and resolve electrical faults.<br></li><li>Switchgear &amp; Transformers – Maintenance and operation.<br></li><li>Electrical Safety Standards – Compliance with industrial safety practices.<br></li></ul>Preferred Skills<br><ul><li>Protection Relay Knowledge<br></li><li>SCADA/DCS Exposure<br></li><li>SAP Maintenance Module Experience<br></li></ul>Work Experience Requirements<br><p>Candidates should have a minimum of <b>10 years</b> of experience in electrical maintenance within a large-scale power plant environment. Experience with power generation equipment, high-voltage systems, and industrial maintenance practices is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.E. Electrical<br></li><li><b>Preferred:</b> Master's Degree in Electrical Engineering (Typical)<br></li><li><b>Additional Certifications:</b> Industrial Electrical Safety / HV Switching Certification (Typical)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<p>Company : Leading company in Kuwait</p><p>Position : Electrical Design Engineer</p><p>Qualification : B.E/B.Tech in Electrical Engineering</p><p>Location : Kuwait</p><p>Salary : 600 - 700 KWD</p><p>Experience : Min 5 years</p><p>Company provides : Free Food, Accommodation &amp; local transportation</p><p>Interview mode : Online Interview</p><p>Job Description: Substation Design (Up to 400 kV), Review and develop, Single Line Diagrams (SLD), Protection schemes, Equipment layouts Coordinate GIS / AIS design requirements Ensure compliance with IEC and utility standards underground Cable Systems Design and review HV/EHV cable systems (up to 400 kV) Evaluate: Cable sizing, routing, and installation methods, Jointing and termination requirements Support technical submissions and approvals Overhead Transmission Lines Review and support design of OHL systems up to 400 kV</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification : B.E/B.Tech in Electrical Engineering</p><p>Experience : Min 5 years</p>

<strong>Overview</strong> <br> <br> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <br> <strong>Responsibilities</strong> <br> <br> <p>The Maintenance Controller for the Kuwait KC-130J Program at Al Mubarak airfield in Kuwait has is responsible for assisting the Maintenance Manager in daily operation and management and administration of the aircraft maintenance program, maintenance personnel, and maintenance actions required to support the customer s missions and flight schedules. The Maintenance Controller assigns priorities and directs maintenance personnel to correct discrepancies, generate work orders, track and comply with all inspection requirements, compile and record maintenance data applicable to the Maintenance Information System (MIS), provide the ability to compare records and reports on consumption of material, quality control, and other aspects of production.</p> <p> </p> <p> <strong>Description:</strong> </p> <ul> <li>Act as point of contact for all aircraft discrepancies that may affect daily operations and mission success.</li> <li>Direct and coordinate all scheduled and unscheduled maintenance actions and workload planning</li> <li>Attend meetings with the customer and provide information, reports, and official correspondence regarding aircraft status, mission capability, and maintenance planning information.</li> <li>Coordinate with the Maintenance Manager and customer representatives in the management of scheduled and unscheduled maintenance to ensure the most efficient use of time and resources.</li> <li>Analyze maintenance data to identify trends and initiate corrective actions as necessary.</li> <li>Manage completion of maintenance actions and ensure the complete and accurate entry of data into the Maintenance Information System (MIS).</li> <li>Coordinate with adjacent contractors and supporting agencies to acquire necessary tools, parts, support, materials, and equipment to prevent maintenance stoppages.</li> <li>Ensure accuracy of documentation, (i.e., aircraft, engine, propeller, logbooks, weight and balance records, and MIS) and adherence to technical publications, policies, procedures, and safe maintenance practices.</li> <li>Prepares and sends required reports and attend staff / customer meetings as required.</li> <li>Coordinate troubleshooting efforts on complex maintenance discrepancies, making recommendations for courses of action based on aircraft service history analysis, applicable Maintenance Manual guidance, and operator experience.</li> <li>Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts.</li> <li>Monitor and track all life limited components, periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by the Periodic Maintenance Requirements Manual, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions.</li> <li>Coordinate with operations personnel and aircrew members to ensure the flight schedule is adequately supported and missions are able to be conducted within prescribed timelines.</li> <li>Conduct off-station maintenance when required.</li> <li>Assist in the conduct of maintenance on the flight line and back shops as required to ensure aircraft are available to support the flight schedule.</li> <li>When necessary, perform other duties and functions critical to the support of the program.<br> </li> </ul> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>Education / Certifications:</strong> </p> <ul> <li>High School Diploma</li> </ul> <p>Must be able to obtain/maintain the following required certifications/qualifications:</p> <ul> <li> <p>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</p> </li> <li>Aircraft Weight &amp; Balance certification</li> <li>Safe for Flight certification</li> <li>Aviation Gas Free Engineering (AVGFE) certification</li> <li>Hydraulic Contamination certification</li> <li> I Level &amp; O Level Tire &amp; Wheel certification</li> <li> I Level MLG Brake repair / rebuilding qualification</li> <li>Auxiliary Power Unit (APU) run qualification</li> <li>Applicable Support Equipment licensing</li> <li>Collateral Duty Inspector (CDI) qualification</li> <li>Collateral Duty Quality Assurance Representative (CDQAR) qualification</li> <li>Corrosion Prevention and Control and Aircraft Paint qualification</li> <li>Confined Space Entry certification</li> </ul> <p> <strong>Experience:</strong> </p> <p> Eight years aircraft maintenance experience with five years experience working on C-130J aircraft preferred.<br> Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.<br> Safe for Flight experience and certification specific to C-130J aircraft preferred.<br> Must have a working knowledge of first aid procedures to be used in an emergency.<br> Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</p> <p> </p> <p> <strong>Specific Requirements:</strong> </p> <ul> <li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li> <li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li> <li>Must have a valid U.S. Driver s License.</li> <li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li> <li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li> <li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp;&nbsp;</li></ul> <p> </p> <p> </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><p><strong>Role Summary</strong></p><br><br><p>We’re looking for a Ast Category Manager to join the team and focus on growing our own Grocery Store “tMart”, which is the region’s first cloud store concept offering 30-minutedelivery of groceries at hypermarket prices. The service has expanded rapidly across Kuwait, UAE, Qatar, Jordan, Bahrain, Egypt, Oman and Iraq!</p><br><br><p><strong>What’s On Your Plate?</strong></p><br><br><ul><li>Full Ownership over the category management role in terms of Assortments, Pricing, Offers and</li><li>Supply.</li><li>Ensuring proper implementation of the commercial strategy and strategic guidelines, including</li><li>categories plan and pricing strategy.</li><li>Providing input to the Ops team flows, adjacencies, tools and templates, fixtures, etc.</li><li>Reviewing and resolving any issues with local suppliers by regular visiting the suppliers warehouse.<br> Assortment:</li><li>Monitoring the daily availability list and ensuring new seasonal items are regularly listed by the supplier.</li><li>Ensuring cost efficiency across our consumers that meets their needs/wants.</li><li>Defining and maintaining the local assortment and integrating the basic assortment for the department/categories.</li><li>Providing regional teams with information regarding products and quantities needed for international and regional contracts.</li><li>Selecting local suppliers, negotiating and purchasing in line with expected needs guided by standards such as cost price, discounts, rebates, payment terms, discounts, etc.</li><li>Regular market visits to check the assortment available in the country and pushing our suppliers to source them for us.<br> Price:</li><li>Pricing the items based on Ministry pricing guidelines on a daily basis.</li><li>Collecting market prices and conducting country price audits.<br> Promos:</li><li>Identifying local promo products and pricing each item and submitting forecasting/relevant reordering information to replenishment.</li><li>Developing the country promotion calendar.</li><li>Following up and ensuring effective execution of all activities required for each promotional event.</li><li>Analyzing and providing inputs for more effective promotional activities such as consumer preferences, local competitors and trends.</li></ul><br><br>What you need to be successful<br><p><strong>What Did We Order?</strong></p><br><br><ul><li>You have at least 5+ years of experience in progressive development and management of multiple product categories, matured by working for large retailers (FMCG), in an international setting.</li><li>You have built teams and led cross-functional projects at scale.</li><li>You are very detail-oriented, and structured and know how to prioritize -- you consider yourself as someone who delivers solutions and not bottlenecks to be solved.</li><li>You are willing to do anything necessary for the project to succeed, including working on the warehouse floor when you are short-staffed to make a customer delivery, or to take customer calls. No job is too insignificant, no detail is too small for you.</li><li>You can interact with senior-level executives and can manage the expectations of multiple stakeholders.</li><li>You are someone energized by </li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Ensure staff is working together as a team to ensure optimum service and that guest needs are met.</p> <p>Inspect grooming and attire of staff, and rectify any deficiencies.</p> <p>Complete opening and closing duties including setting up necessary supplies and tools, cleaning all equipment and areas, locking doors, etc.</p> <p>Inspect storage areas for organization, use of FIFO, and cleanliness.</p> <p>Complete scheduled inventories and stock and requisition necessary supplies.</p> <p>Monitor dining rooms for seating availability, service, safety, and well being of guests.</p> <p>Complete work orders for maintenance repairs.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; and serve as a role model and first point of contact of the Guarantee of Fair Treatment/Open Door Policy process.</p> <p>Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications.</p> <p>Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation.</p> <p>Speak with others using clear and professional language.</p> <p>Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees.</p> <p>Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings.</p> <p>Read and visually verify information in a variety of formats (e.g., small print).</p> <p>Visually inspect tools, equipment, or machines (e.g., to identify defects).</p> <p>Stand, sit, or walk for an extended period of time or for an entire work shift.</p> <p>Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance.</p> <p>Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination.</p> <p>Move through narrow, confined, or elevated spaces.</p> <p>Move up and down stairs and/or service ramps.</p> <p>Reach overhead and below the knees, including bending, twisting, pulling, and stooping.</p> <p>Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education:</strong> High school diploma or G.E.D. equivalent.</p> <p><strong>Related Work Experience:</strong> At least 2 years of related work experience.</p> <p><strong>Supervisory Experience:</strong> At least 1 year of supervisory experience.</p> <p><strong>License or Certification:</strong> None</p><p></p></section>

<p><h4>Description</h4> <p>The role in brief:<br> You'll be responsible to help support your employer's computer systems by installing, designing, and protecting them. This includes working on local area networks, network segments, Internet systems, and wide area networks.</p> <h4>Your responsibilities</h4> <ul> <li>Implementation and the high level of performance tuning and recovery procedures for mission critical enterprise systems.</li> <li>Serve as a technical expert in the area of system administration for complex operating systems. Investigate and analyze feasibility of system requirements and develop system specifications. Identify methods and solutions.</li> <li>Installation, configuration, and upgrading of servers and related hardware and software in a LAN, WAN, and stand-alone environment.</li> <li>Investigation, diagnostic testing, troubleshooting, and repair or resolution of system, hardware, software, and infrastructure issues.</li> </ul> <h4>Requirements</h4> <h4>Your qualification</h4> <ul> <li>Minimum 4 to 6 years of experience in a similar environment.</li> <li>Candidate should possess at least a Bachelor of Science or Bachelor of Computer Application.</li> <li>MCSE/MCSA certification and application-level certification related to Exchange and Storage will be an added advantage.</li> <li>Should be fluent in English; Arabic is an added advantage.</li> <li>Must have good communication skills, both verbal and oral, and be a self-starter.</li> </ul> <h4>Your proficiencies</h4> <ul> <li>Knowledge in network hardware infrastructure, diagnostic, and troubleshooting abilities.</li> <li>Fluent in English; Arabic would be an added advantage.</li> <li>Capacity to deal with complex problems with ability to demonstrate good judgment and decision making.</li> <li>Good communication skills.</li> <li>Able to work in a fast-paced environment, motivated, team player, team management, business and organization understanding.</li> <li>Organized, highly motivated, and goal-oriented.</li> <li>Adaptive to sudden schedule changes.</li> <li>Able to work well within teams.</li> </ul></p><p></p>

<p><h4>Description</h4> <p>The role in brief:<br> You'll be responsible to help support your employer's computer systems by installing, designing, and protecting them. This includes working on local area networks, network segments, Internet systems, and wide area networks.</p> <h4>Your responsibilities</h4> <ul> <li>Implementation and the high level of performance tuning and recovery procedures for mission critical enterprise systems.</li> <li>Serve as a technical expert in the area of system administration for complex operating systems. Investigate and analyze feasibility of system requirements and develop system specifications. Identify methods and solutions.</li> <li>Installation, configuration, and upgrading of servers and related hardware and software in a LAN, WAN, and stand-alone environment.</li> <li>Investigation, diagnostic testing, troubleshooting, and repair/resolution of system, hardware, software, and infrastructure.</li> </ul> <h4>Requirements</h4> <h4>Your qualification</h4> <ul> <li>Minimum 4 to 6 years of experience in a similar environment.</li> <li>Candidate should possess at least a Bachelor of Science or Bachelor of Computer Application.</li> <li>MCSE/MCSA certification and application-level certification related to Exchange and Storage will be an added advantage.</li> <li>Should be fluent in English; Arabic is an added advantage.</li> <li>Must have good communication skills, both verbal and oral, and be a self-starter.</li> </ul> <h4>Your proficiencies</h4> <ul> <li>Knowledge in network hardware infrastructure, diagnosis, and troubleshooting abilities.</li> <li>Fluent in English; Arabic would be an added advantage.</li> <li>Capacity to deal with complex problems with ability to demonstrate good judgment and decision making.</li> <li>Good communication skills.</li> <li>Able to work in a fast-paced environment, motivated and a team player with team management, business, and organization understanding.</li> <li>Organized, highly motivated, and goal-oriented.</li> <li>Adaptive to sudden schedule changes.</li> <li>Able to work well within teams.</li> </ul></p><p></p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair, and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li><strong>Perform basic work in the installation, configuration changes, modification, repair, and adjustment of aircraft armament systems and components.</strong></li> <li><strong>Perform basic maintenance modification, destruction, and demilitarization on ammunition and explosive components.</strong></li> <li><strong>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</strong></li> <li><strong>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</strong></li> <li><strong>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</strong></li> <li><strong>Support quality assurance, compliance, continuity, and standardization of munitions programs.</strong></li> <li><strong>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</strong></li> <li><strong>Maintain weapons certification and currency.</strong></li> <li><strong>Assist with availability and serviceability of munitions to support and meet customer requirements.</strong></li> <li><strong>Perform all other duties as assigned or requested.</strong></li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years .</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Summary: To efficiently perform installation &amp; commissioning of electrical installations within KDD in accordance with KDD as well as international standards and norms. Key Accountabilities: Ensure efficient execution of electrical installation, commissioning, testing, and validation activities in compliance with KDD and international standards. Deliver high-quality installation of electrical systems including LV/HV systems, control panels, fire alarm, network, and control wiring within project timelines. Maintain a safe, clean, and compliant working environment in accordance with HSE regulations of KDD and the State of Kuwait. Ensure accuracy and reliability in cable termination, tray installation, field wiring, and panel assembly activities. Support smooth project execution through effective coordination with project teams and other technical disciplines. Ensure all assigned tasks are completed as per management instructions and operational requirements. Roles &amp; Responsibilities: Perform electrical installation, commissioning, testing, and validation of control panels and electrical systems. Carry out cable tray installation, cable routing, termination, and field wiring for LV, HV, fire alarm (FA), network, and control systems. Assemble, install, and assist in commissioning electrical and control panel boards as per project specifications. Read and interpret electrical drawings, schematics, and technical documentation for proper execution of work. Maintain tools, equipment, and work areas in a safe and organized condition. Coordinate with engineers, supervisors, and other technicians to ensure timely completion of project activities. Adhere strictly to HSE policies, safety procedures, and quality standards at all times. Provide technical support to team members and assist in resolving site-related electrical issues when required. Follow all management instructions and support operational requirements as needed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education Diploma / ITI in Electrical domain. Professional experience (years) 15+. Professional background Basic knowledge of MS office programs-Proficient Knowledge of HV, LV, FA &amp; Control Systems Installation &amp; Testing.</p><p></p></section>