Production Technician Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times. ESSENTIAL FUNCTIONS + Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. + Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. + Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. + Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. + Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. + Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. + Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. + Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. + Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. + Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. + Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. + Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. + Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). + Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. + Conduct off station maintenance when required. + When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Qualifications MINIMUM REQUIREMENTS / QUALIFICATIONS + Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language. + Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration. + Graduation from a standard four (4) year high school or equivalent (GED). + Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. + Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures). + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing -“I” Level &amp; “O” Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required. + Have a strong knowledge base of Intermediate Level Maintenance business procedures. + Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver’s license. + Must have an in-depth knowledge of technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must have a working knowledge (input and extract data) of computers. + Must be willing and able to work with job required hazardous materials. + Must be willing and able to conduct specialty on the job training. + Requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Digital Marketing Specialist / SEO Specialist / Odoo Developer</p><p><br></p><p>Urgently hiring for a leading Mobile &amp; Electronics Retail Chain in Kuwait for the below role Note: The interview is scheduled in Bangaluru</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Digital Marketing Specialist</h2><p>Looking for a Digital Marketing Specialist with 4+ years of experience in Google Ads, Meta Ads, SEO, GA4, and campaign optimization. Strong analytical skills and ROI-focused approach required.</p><h2>SEO Specialist</h2><p>Hiring an SEO Specialist with 25 years of experience in on-page, off-page, and technical SEO. Must be proficient in Google Search Console, GA4, Ahrefs/SEMrush, and keyword research.</p><h2>Shopify Developer</h2><p>Looking for a Shopify Developer with 25 years of experience in Liquid, HTML, CSS, JavaScript, Shopify APIs, and theme customization. Experience in eCommerce optimization is preferred.</p><h2>Odoo Developer</h2><p>Hiring an Odoo Developer with 25 years of experience in Python, Odoo framework, PostgreSQL, XML, and ERP customization. Experience with integrations is preferred.</p><h2>CCTV Technician</h2><p>Looking for a CCTV Technician with 3+ years of experience in installation and maintenance of IP CCTV systems, Dahua DSS servers, networking, and troubleshooting.</p><h2>Home Appliance Technician</h2><p>Hiring Home Appliance Technicians with experience in repairing refrigerators, washing machines, ACs, microwaves, and other home appliances. ITI/Diploma preferred.</p><h2>Showroom Sales Executive</h2><p>Looking for Sales Executives with 12 years of retail/showroom sales experience in mobiles or consumer electronics. Strong communication and customer handling skills required. Graduation mandatory.</p><h2>Mobile Technician</h2><p>Hiring Mobile Technicians with 2+ years of experience in Apple iPhone repairs, hardware/software troubleshooting, and component replacement. Board-level repair experience is an advantage.</p><h2>Delivery Driver</h2><p>Looking for Delivery Drivers with a valid 4-wheeler driving licence and 2+ years of driving experience. Must be able to drive manual and automatic vehicles and communicate in basic English.</p><h2>A/C Technician</h2><p>Hiring A/C Technicians with 23 years of experience in installation, servicing, and repair of residential and commercial air conditioning systems.</p><h2>Electrician</h2><p>Looking for Electricians with 2+ years of experience in electrical installation, maintenance, and troubleshooting. ITI/Diploma in Electrical is mandatory.</p><h2>Junior Database &amp; Backend Engineer</h2><p>Hiring Backend Engineers with 2+ years of experience in Microsoft SQL Server, C#, ASP.NET Core, REST APIs, and backend development. Strong SQL and API integration skills required.</p><p></p></section>

<ul><li><p>Install, configure, and maintain Audio Visual systems</p></li><li><p>Install projectors, screens, speakers, displays, and AV equipment</p></li><li><p>Perform structured cabling and cable termination</p></li><li><p>Install and troubleshoot low-voltage systems</p></li><li><p>Conduct testing, commissioning, and troubleshooting</p></li><li><p>Read and understand wiring diagrams and technical drawings</p></li><li><p>Coordinate with project teams during site installations</p></li><li><p>Ensure quality, safety, and professional installation standards</p></li><li><p>Diploma / ITI / Technical qualification preferred</p></li><li><p>Experience in AV and Low Voltage installation</p></li><li><p>Knowledge of AV equipment, cabling, and basic networking</p></li><li><p>Ability to troubleshoot technical issues</p></li><li><p>Good communication and teamwork skills</p></li><li><p>Kuwait driving license is an advantage</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>The Audio Visual & Low Voltage Technician is responsible for the installation, configuration, testing, commissioning, troubleshooting, and maintenance of Audio Visual and Low Voltage systems at residential, commercial, and project sites. The technician will ensure that all installations are completed safely, professionally, and according to project requirements.</p>

<ul><li><p>Install, configure, and maintain Audio Visual systems</p></li><li><p>Install projectors, screens, speakers, displays, and AV equipment</p></li><li><p>Perform structured cabling and cable termination</p></li><li><p>Install and troubleshoot low-voltage systems</p></li><li><p>Conduct testing, commissioning, and troubleshooting</p></li><li><p>Read and understand wiring diagrams and technical drawings</p></li><li><p>Coordinate with project teams during site installations</p></li><li><p>Ensure quality, safety, and professional installation standards</p></li><li><p>Diploma / ITI / Technical qualification preferred</p></li><li><p>Experience in AV and Low Voltage installation</p></li><li><p>Knowledge of AV equipment, cabling, and basic networking</p></li><li><p>Ability to troubleshoot technical issues</p></li><li><p>Good communication and teamwork skills</p></li><li><p>Kuwait driving license is an advantage</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>The Audio Visual & Low Voltage Technician is responsible for the installation, configuration, testing, commissioning, troubleshooting, and maintenance of Audio Visual and Low Voltage systems at residential, commercial, and project sites. The technician will ensure that all installations are completed safely, professionally, and according to project requirements.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Audio Visual &amp; Low Voltage Technician is responsible for the installation, configuration, testing, commissioning, troubleshooting, and maintenance of Audio Visual and Low Voltage systems at residential, commercial, and project sites. The technician will ensure that all installations are completed safely, professionally, and according to project requirements.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Install, configure, and maintain Audio Visual systems</li><li>Install projectors, screens, speakers, displays, and AV equipment</li><li>Perform structured cabling and cable termination</li><li>Install and troubleshoot low-voltage systems</li><li>Conduct testing, commissioning, and troubleshooting</li><li>Read and understand wiring diagrams and technical drawings</li><li>Coordinate with project teams during site installations</li><li>Ensure quality, safety, and professional installation standards</li><li>Diploma / ITI / Technical qualification preferred</li><li>Experience in AV and Low Voltage installation</li><li>Knowledge of AV equipment, cabling, and basic networking</li><li>Ability to troubleshoot technical issues</li><li>Good communication and teamwork skills</li><li>Kuwait driving license is an advantage</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>AFCAP V: Kuwait SWA Transient Aircraft Services Technician (Secret Clearance)<br><br><p><b><span>Belong, Connect, Grow</span><span>, with</span><span>KBR!&nbsp;</span></b></p><br><br><br><p><b><span>Program Summary</span></b></p><br><br><p><span>KBR, through the AFCAP V Program,assists</span><span>the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services</span><span>facilitate</span><span>essential</span><span>aircraft</span><span>arrivals and departures</span><span>servicesfor United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.&nbsp;</span></p><br><br><br><p><b><span>Job Summary</span></b></p><br><br><p><span><span>The Transient Aircraft Services (TAS) Technician</span><span>is responsible for</span><span>the execution of</span><span>aircraft</span><span>ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs</span><span>aircraft</span><span>arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</span></span></p><br><br><p><span><span>This position ensures all</span><span>aircraft</span><span>servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for</span><span>maintaining</span><span>operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</span></span></p><br><br><br><p><b><span>Roles and Responsibilities&nbsp;</span></b></p><br><br><ul><li><p><span><span>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE</span><span>at all times</span><span>.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Perform</span><span>aircraft</span><span>marshaling, parking, and positioning</span><span>in accordance with</span><span>applicable Technical Orders and airfield procedures.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Execute</span><span>aircraft</span><span>arrival and departure services, including</span><span>chocking</span><span>, grounding, and ensuring safe positioning on the flight line.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Conduct</span><span>aircraft</span><span>servicing operations, including general ground handling tasks required to support</span><span>aircraft</span><span>turn-around and mission readiness.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Assist</span><span>in</span><span>aircraft</span><span>launch and recovery operations in coordination with Supervisors and Airfield Management.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Maintain strict accountability of tools and equipment;</span><span>ensure compliance with tool control programs at all times</span><span>.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all</span><span>aircraft</span><span>servicing operations.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Identify</span><span>and report safety hazards, equipment malfunctions, and operational issues to leadership</span><span>immediately</span><span>.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Support documentation requirements, including</span><span>aircraft</span><span>servicing records, shift logs, and inspection checklists.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Assist</span><span>in</span><span>maintaining</span><span>cleanliness and organization of the flight line and work areas.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Support training and qualification requirements to</span><span>maintain</span><span>mission readiness and compliance with certification standards.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Perform duties in austere conditions, including extreme weather, while</span><span>maintaining</span><span>safety and operational discipline.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Perform</span><span>additional</span><span>duties and</span><span>tasks as</span><span>assigned by the Supervisor or Site Manager.</span></span></p><br><br></li></ul><br><br><p><b><span>Basic Qualifications&nbsp;</span></b></p><br><br><ul><li><p><span><span>Must be a U.S. citizen </span></span></p><br><br></li></ul><br><ul><li><p><span><span>Ability to obtain/</span><span>maintain</span><span>a SECRET clearance&nbsp;</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Ability to</span><span>maintain</span><span>operational continuity across rotations and work within Government-led governance rhythms</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Minimum 3–5 years of experience in aviation operations,</span><span>aircraft</span><span>maintenance, or Transient Aircraft Services&nbsp;</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Hands-on experience working on a flight line or in</span><span>aircraft</span><span>ground operations&nbsp;</span></span></p><br><br></li></ul><br><br><p><b><span><span>Basic knowledge of:&nbsp;</span></span></b></p><br><br><ul><li><p><span><span>Aircraft</span><span>marshaling and ground handling procedures&nbsp;</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Flight line safety requirements&nbsp;</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Use of ground support equipment</span></span></p><br><br></li></ul><br><br><br><p><b><span>Preferred Qualifications</span></b></p><br><br><ul><li><p><span><span>Prior experience supporting U.S. Air Force TAS operations</span></span></p><br><br></li></ul><br><ul><li><p><span><span>FAA Airframe &amp; Powerplant (A&amp;P) certification or equivalent military experience</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Familiarity with FOD programs, tool control, and flight line safety compliance</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Experience coordinating with MOC, Airfield Management, and</span><span>aircraft</span><span>maintenance teams</span><span>.</span></span></p><br><br></li></ul><br><br><p><b><span>K</span><span>BR Benefits</span></b></p><br><br><p><span><span>KBR offers a selection of competitive lifestyle benefits which could include</span><span>401</span><span>K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.&nbsp;</span></span></p><br><br><br><br><br> </div>

<p>Date Posted: 2026-08-12</p><p>This position is located in Kuwait.</p><p>What You Will Do : The Patriot Power Generation Frequency Converter Maintenance Technician supports the Kuwait Air Defense Force (KADF) Patriot program. Participates in power frequency convertor improvement and repair on the KADF Patriot systems. Shall be responsible for the repair and maintenance of all generators to include installation, Preventive Maintenance Checks and Services (PMCS), and operations. Will also coordinate with generators in the daily operations, repair, maintenance, PMCS, and generator fueling. Provides technical and engineering advice to the KADF Patriot program leadership. Participate in preventive maintenance operations at all maintenance levels. Performs troubleshooting, fault isolation and field maintenance repair for all frequency convertors for all systems. Functionally tests power frequency convertors after making repairs to assure compliance with design specifications and standards. Participates in the opening and closing of work orders and in on-the-job training (OJT). Implements approved engineering changes. Enforces approved KADF safety policies, procedures, and standards. Performs job related duties as specified by the user unit.</p><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications You Must Have :</h2><ul><li>Graduate from technical school in electronics or manufacturer's course of instruction on power frequency convertors, or equivalent on-the-job training (OJT).</li><li>Must have a minimum of five (5) years experience in troubleshooting and repair of power frequency convertors.</li><li>Must be proficient in troubleshooting, fault isolation and repair of various types of power frequency convertors.</li><li>Skill in the use of engineering drawings, schematic diagrams, general purpose commercial test equipment and common tools is required.</li><li>Proficiency in the English language, spoken and written.</li><li>Requires current SECRET Clearance</li></ul><h2>Qualifications We Prefer:</h2><ul><li>Knowledge of the Patriot Missile System</li></ul><h2>Required Education:</h2><ul><li>Bachelor s Degree with 5 years of related experience, or Associates Degree with 8 years experience or HS Diploma/GED with 12 years of related experience.</li></ul>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>USAF equivalent position is Avionics Technician Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li> <li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li> <li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs.</li> <li>Uses common and complex test instruments in the performance of assigned duties.</li> <li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li> <li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li> <li>Must be able to work with limited supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft avionics and/or GCS maintenance experience required.</li> <li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li> <li>Must have basic knowledge of RFF systems, components, and accessories.</li> <li>Must possess general understanding of technical publications related to aircraft electronics maintenance.</li> <li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li> <li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li> <li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Current IAT Level II Certification.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 experience as an avionics technician.</li> <li>Avionics technician experience within the last 10 years.</li> </ul> <h4>Compensation details</h4> <p>34.35</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting</h4> <p>06/02/2026 - 06/06/2026</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under federal laws and supplemental language at labor laws posters.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Job Details / Position Summary The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness. Description: • Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform.• Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data• Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.• Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals.• Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications.• Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins.• Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. • Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance.• Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system.• Performs close tolerance adjustment, repair and rework of equipment in and out of shop area.• Services, inspects and tests aviation support equipment used for direct and indirect aircraft support.• Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type.• Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE).• Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment.• Conducts off station maintenance when required.• When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: • High School Diploma • Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: + “I” Level &amp; “O” Level Tire &amp; Wheel certification + Hydraulic Contamination certification + Collateral Duty Inspector (CDI) qualification + Corrosion Prevention and Control and Aircraft Paint qualification + “I” Level Battery Maintenance certification Experience: • Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. • Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. • Must be United States (U.S.) citizen , be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Have a strong knowledge base of intermediate level maintenance business practices and procedures • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” level, “I” level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance. • Must have an in-depth knowledge of applicable technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program. • Must be willing and able to work with hazardous materials and conduct specialty on-the-job training. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Mechanical Maintenance Technician – Flexible Packaging Industry (Kuwait)</p><p><br></p><p>We are looking for an experienced Mechanical Maintenance Technician to join our flexible packaging and printing facility in Kuwait. The ideal candidate will have hands-on experience maintaining and troubleshooting printing, lamination, slitting, and packing line machinery.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Perform preventive and corrective maintenance on production machinery (printing presses, laminators, slitters, packing equipment)</p><p>Diagnose and repair mechanical faults to minimize downtime</p><p>Conduct routine inspections and lubrication schedules per maintenance plans</p><p>Perform roll calibrations to ensure accurate tension, alignment, and print/lamination quality</p><p>Conduct root cause analysis on equipment failures and implement corrective/preventive actions</p><p>Monitor and report on machine efficiency (OEE/downtime tracking) to identify improvement areas</p><p>Coordinate spare parts requirements and maintain maintenance records/logs</p><p>Support installation, alignment, and calibration of new or upgraded equipment</p><p>Work closely with production and QC teams to ensure machine readiness and output quality</p><p>Follow all safety procedures and report hazards or equipment issues promptly</p><p>Requirements:</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Diploma B-Tech in Mechanical Engineering or related technical field</p><p>3+ years of hands-on maintenance experience, preferably in flexible packaging, printing, or related manufacturing industries</p><p>Strong knowledge of mechanical systems, pneumatics, hydraulics, and rotating equipment</p><p>Ability to read technical drawings and equipment manuals</p><p>Experience with roll calibration techniques and root cause failure analysis</p><p>Good troubleshooting and problem-solving skills</p><p>Willingness to work in shifts as per operational needs</p></div>

<p><h4>Description</h4> <p>Apt Resources is seeking a skilled borewell technician to join our client's agriculture farm in Abu Dhabi, UAE. In this role, you will be responsible for the installation, maintenance, and repair of borewell systems that supply water for irrigation and farm operations. Your expertise will ensure that the farm has a reliable water source, vital for crop growth and sustainability.</p> <p>The ideal candidate will possess a strong understanding of borewell operations, troubleshooting skills, and the ability to work independently. You will collaborate closely with the farm management team to ensure efficient water management and support agricultural productivity.</p> <h4>Responsibilities</h4> <ul> <li>Install and maintain borewell systems, ensuring efficient operation and water supply.</li> <li>Conduct regular inspections and troubleshooting of borewell installations.</li> <li>Repair any malfunctions and perform routine maintenance on borewell equipment.</li> <li>Ensure compliance with agricultural water management policies and safety regulations.</li> <li>Collaborate with farm staff to optimize water usage effectively.</li> <li>Keep accurate records of maintenance activities and repairs performed.</li> </ul> <h4>Requirements</h4> <ul> <li>Proven experience as a borewell technician or similar role in agriculture.</li> <li>Strong knowledge of borewell systems, installation, and maintenance.</li> <li>Ability to troubleshoot technical issues and perform repairs.</li> <li>Excellent problem-solving skills and attention to detail.</li> <li>Ability to work independently and as part of a team.</li> <li>Good physical stamina and the capability to work in outdoor conditions.</li> </ul> <h4>Benefits</h4> <p><strong>Salary:</strong> AED 2,500 - AED 3,000 plus accommodation and food provided.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Electro-Mechanical Technician</b></p><br><p>Would you like the opportunity to collaborate on a wide range of technical products?</p><br><p>Do you enjoy creating innovative and strategic solutions to solve complex problems?</p><br><p><b>Join our cutting-edge Drilling Services team</b></p><br><p>At Baker Hughes our purpose is clear. We take energy forward making it safer, cleaner and more efficient for people and the planet. Our team partners with the business to effectively enable and sustain change to improve our performance.</p><br><p><b>Partner with the best</b></p><br><p>As an Electro-Mechanical Technician, you will troubleshoot, test, assemble, disassemble and perform the visual inspection of mechanical assemblies. Whilst assisting in repairing and modifying non-conforming equipment, you will perform all test with minimal instruction.</p><br><p>As an Electro-Mechanical Technician, you will be responsible for:</p><br><ul><li>Reviewing procedures for assembly, disassembly, and test verification accuracy Configuring test stations and systems</li><li>Analyzing and interpreting data from environmental tests, and troubleshooting equipment problems</li><li>Assisting in the set-up of experiments and the recordings of experimental data in collaboration with Engineering and Reliability groups</li><li>Testing and evaluating the performance and, if required, repairing general purpose test equipment</li><li>Providing leadership/coaching to other technicians in areas of proven competence</li><li>Working in compliance with HS&amp;E policies and procedures</li></ul><p><b>Fuel your passion</b></p><br><p>To be successful in this role you will:</p><br><ul><li>Have a 3-year technical diploma or associate degree in the electrical/Mechanical field or higher</li><li>Have 2-7 years of related experience in electro-mechanical function</li><li>High level of knowledge in the maintenance of electronics</li><li>Have advanced skills in soldering and assembling of electro-mechanical devices</li><li>Have the ability to read and interpret blueprints, wiring diagrams, assembly prints and parts lists</li><li>Be proficient in the use of measurement and gauging equipment and processes</li><li>Be proficient in the use of multimeters, megohmmeters, hi-pot testers and other basic instruments</li><li>Have strong written and oral English skills</li></ul><p><b>Work in a way that works for you</b></p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; This role is a shift-based working pattern.</p><br><p><b>Working with us</b></p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.</p><br><p><b>Working for you</b></p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><br><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits</li></ul>The Baker Hughes internal title for this role is: ARMO Tech - Electro Mech III </div>

Electrician <br><br> Job Id :100193565<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>WALK-IN INTERVIEW – KOC MAINTENANCE PROJECT<br><br>???? NBTC Corporate Office, Kuwait<br><br>???? Date: Saturday, 08th August 2026<br><br>NBTC Group is urgently hiring for the following positions under the KOC Maintenance Project. Interested and qualified candidates are invited to attend a walk-in interview.<br><br> Instrument Analyzer Technician – 2 Vacancies<br><br>???? Salary: KWD 214 + OT<br><br>Requirements:<br><br>Diploma in Instrumentation / Instrumentation & Controls / Electronics + 5 years' experience in installation, maintenance, and repair of various analyzers (Online GC)<br><br>OR<br><br>10th Std. + 2 years Industrial Trade Certificate (Instrumentation/Electronics) + 8 years' experience in installation, maintenance, and repair of various analyzers (Online GC)<br><br> Electrician Mate – 2 Vacancies<br><br>???? Salary: KWD 107 + OT<br><br>Requirements:<br><br>10th Std. + 2 years Industrial Training Certificate + 3 years' practical experience in a similar field<br><br>???? Venue: NBTC Corporate Office, Kuwait<br><br>????️ Date: 08-08-2026<br><br>???? Documents to bring: CV, Educational Certificates, Experience Certificates, Passport & Civil ID copies, and Passport-size photographs<br><br>Walk in with your documents — don't miss this opportunity to join the KOC Maintenance Project team!<br><br>Hire Local Contractors<br><br>Basic Details<br><br>Qualification : <br><br>Posted : 1 month ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Senior Laboratory Technician - Drilling &amp; Completion Fluids</b></p><br><p><b>Are you an application Engineer looking for a new challenge?<br>Are you experienced in Drilling &amp; Completion Fluids?</b></p><br><br><p><b>Join our Well Construction team!</b></p><br><br><p><span>The Fluids Laboratory Chemist/Chemical Engineering ensures Baker Hughes can deliver flawless execution through the involvement in pre-planning, job </span>execution<span> and post-job analysis. This position delivers Drilling and Completion Fluids Lab testing, Quality testing based on API standards and suppliers and baker Hughes standards, and Analytical work to support product and systems design, project troubleshooting and performance analysis</span></p><br><br><p><b>As a Senior Laboratory Technician - Drilling &amp; Completion Fluids, you will be responsible for:&nbsp;</b></p><br><br><ul><li><span>Performing pilot testing on drilling and completion fluids on proposed mud program recipes and actual field mud and/or brine samples, when required.</span></li></ul><ul><li><span>Performing QA/QC on proposed materials as per API Specs 13A, API RP 13B, API RP 13J, API RP 13I, OCMA, ANSI and ISO 13500-2009 latest edition testing procedures or as materials manufacturer’s recommended QA/QC testing procedures and preparation of Certificate of Analysis (CoA).</span></li></ul><ul><li><span>Repairing, maintaining and calibrating onshore and rig site testing equipment.</span></li><li><span>Running permeability return and core flow tests to evaluate and select optimum mud cake breaker formulation.</span></li></ul><ul><li><span>Running PPA/PPT (permeability Plugging Apparatus/Test), laser PSD (Particle Size Distribution) analyser to evaluate and design RDF (Reservoir Drill-In fluids) and Low invasion Coring Fluids.</span></li></ul><ul><li><span>Monitoring and maintaining safe stock level of al lab consumables and spare parts for smooth operations.</span></li></ul><br><p><b>To be successful in this role you will:&nbsp;</b></p><br><ul><li>Have a Bachelor’s degree in Chemistry, Chemical Engineering or Petroleum/Mechanical Engineering&nbsp;</li></ul><ul><li>Have a minimum of 10 years of experience in drilling &amp; completion fluids, working <span><span>in a Mud Lab as a Chemist or Mud lab technician. Practical Mud Engineering experience is preferred.</span></span></li></ul><ul><li><span><span>Be fiscally fit to travel and work offshore when required.</span></span></li><li><span><span>Have t</span></span>horough understanding of the Drilling and Completion Fluids product line and technical job planning requirements.&nbsp;</li><li>Have excellent organizational, analytical, and problem-solving skills.&nbsp;</li><li>Have the ability to work independently.&nbsp;</li></ul><br><p><b>Work in a way that works for you</b></p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too.</p><br><br><p><b>Working with us</b></p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b></p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input.&nbsp; Join us, and you can expect:</p><br><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits</li></ul>The Baker Hughes internal title for this role is: Services Specialist - Laboratory Specialist </div>

<p>Generator (3 - 150KW) and HVAC Technician Kuwait Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kw generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel.Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories.Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories.Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles.Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS).Operate a Load bank during testingFabricate wire harnesses and solder terminals.Some work will be in a generator shop environment, and some work will be in a field environment.Other duties as assigned. WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have:Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.Able to obtain and maintain a Secret Clearance.Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, IraqRole requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.SkillsGenerator RepairHVAC Repair/TroubleshootingGenerator TroubleshootingPower Generation CertificationsSection 608 Technician Certification EPA is a plus GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do.Growth: AI-powered career tool that identifies career steps and learning opportunities.Support: An internal mobility team focused on helping you achieve your career goals.Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay.Community: Award-winning culture of innovation and a military-friendly workplace. OWN YOUR OPPORTUNITY Explore a career in program management at GDIT and you ll find endless opportunities to grow alongside colleagues who share your passion for the mission and delivering results. #GDITPriority #CECOMWFS #DefenseOCONUS</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High School diplomaExperience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experienceTechnical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.Security Clearance: Able to obtain and maintain a Secret Clearance.Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, IraqRole requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.SkillsGenerator RepairHVAC Repair/TroubleshootingGenerator TroubleshootingPower Generation CertificationsSection 608 Technician Certification EPA is a plus</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.USAF equivalent position is Avionics Technician Apprentice.</p><p><b><br></b></p><p><b>Essential Responsibilities:</b></p><ul><li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li><li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li><li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs.</li><li>Uses common and complex test instruments in the performance of assigned duties.</li><li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li><li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li><li>Must be able to work with limited supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</p><p>Minimum of one year of actual Aircraft Avionics and/or GCS maintenance experience required.</p><p>Must have basic knowledge of basic and complex electronics maintenance and repair.</p><p>Must have basic knowledge of RFF systems, components, and accessories.</p><p>Must possess general understanding of technical publications related to Aircraft electronics maintenance.</p><p>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</p><p>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</p><p>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</p><p>Must be able to inspect and operate ground support and auxiliary equipment.</p><p>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</p><p>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</p><p>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</p><p>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</p><p>Must be able to speak, read, write, and understand English.</p><p>Must submit updated SF-86 within 30 days of hire start date.</p><p>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</p><p>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</p><p>Must have current/active State Issued Driver s License.</p><p>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</p><p>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a zero harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a secret clearance</li> <li>Ability to maintain operational continuity across rotations and work within government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p></p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p></p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life</p><p></p>