Neurosurgeon Jobs in Kuwait

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul>

<p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p><strong>Desired Candidate Profile</strong></p><p>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</p><p>Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</p><p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p><p>Safely prepare aircraft for inspections and maintenance checks and services.</p><p>Perform scheduled inspections and assist in performing special inspections.</p><p>Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p><p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p><p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Perform other duties as requested.</p><strong>Minimum Requirements :</strong><p>High School Diploma or Equivalent is required.</p><p>With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required.</p><p>All experience must be within the Five (5) most recent years.</p><p>Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required.</p><p>All experience must be within the Six (6) most recent years.</p><p>U.S. Military Technical school or specialized training course is desired, certification of education level is required.</p><p>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</p><p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</p><p>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</p><strong>Security Clearance Requirements:</strong><p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</p><strong>Additional and Preferred Qualifications :</strong><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p><p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p><p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p><p>Working knowledge of technical publications and Logistics Information Systems.</p><p>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p><p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><strong>Physical Requirements/Working Environment</strong><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to climb stairs, ramps, ladders, and work stands.</p><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p><p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>Will handle dirty parts and lubricants.</p><p>Will be required to wear proper Personal Protective Equipment (PPE).</p><p>Must be able to pass a Respirator Physical and Fit Test qualification.</p><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p><p>Must be able to lift/push/pull minimum of 50 pounds.</p><p>May work in maintenance shop or outside.</p><p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>May be exposed to extreme noise from operating equipment.</p><p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>May be expected to work in austere environments and all-weather conditions</p>

<div><br></div><p><strong>Head of Sales</strong><br> <br> Would you like to be part of the most international company in the world? A company operating in more than 220 countries worldwide and has been pioneering cross-border express shipping since 1969.  Would you like to be part of a business that connects people across the globe and want to make a difference? Then waste no time and join our amazing team at DHL Group. DHL Global Forwarding, Freight (DGFF) is the Group's air, ocean, and road freight specialist. We offer standardized transport as well as highly specialized end-to-end solutions to customers in a wide range of industries globally.</p> <p><em>Who moves mountains even across oceans? You do.</em> <strong>DHL Global Forwarding</strong> has an opening for a <strong>Head of sales </strong><strong>in</strong><strong> Ardiya, Kuwait</strong><strong>.</strong></p><p>Join us in connecting people and improving lives!</p><p><strong>In this Head of Sales position </strong></p> <ul> <li>Lead the development and execution of the country sales strategy and annual sales plan in line with DHL Global Forwarding's regional and global commercial strategy, growth objectives and policies.</li> <li>Deliver agreed revenue, gross profit, volume, new-business and customer-retention targets, with a strong focus on profitable and sustainable growth.</li> <li>Identify market opportunities, priority sectors, customer segments and strategic prospects to strengthen DHL Global Forwarding's market position and drive above-market growth.</li> <li>Develop and maintain a strong sales pipeline, ensuring appropriate opportunity qualification, pipeline coverage, conversion and forecasting accuracy.</li> <li>Lead new-business acquisition while driving retention, development and cross-selling opportunities across existing customers.</li> <li>Personally engage in major strategic opportunities and lead significant customer negotiations in collaboration with Product, Pricing, Operations, Finance and other relevant functions.</li> <li>Ensure customer solutions are developed based on a clear understanding of customer requirements, market developments and DHL Global Forwarding's product and service capabilities.</li> <li>Drive appropriate pricing discipline and customer profitability in collaboration with Product, Pricing and Finance, ensuring compliance with approved pricing guidelines and commercial governance.</li> <li>Regularly review sales performance, revenue, gross profit, pipeline, customer retention and other agreed KPIs, and implement corrective actions where required.</li> <li>Develop customer strategies for key and strategic accounts and ensure effective senior-level customer engagement, business reviews and relationship management.</li> <li>Promote collaboration across Air Freight, Ocean Freight, Customs, Industrial Projects and other products and solutions to maximize cross-selling and end-to-end customer opportunities.</li> <li>Ensure effective use of DHL sales processes, CRM tools, pipeline management and sales effectiveness standards, maintaining high levels of data quality and commercial discipline.</li> <li>Monitor competitor activity, market trends and emerging customer requirements and translate relevant insights into sales actions and business-development opportunities.</li> <li>Lead, motivate and develop the sales organization, setting clear objectives and ensuring individual and team performance against agreed targets.</li> <li>Coach the sales team in customer engagement, solution selling, negotiation, opportunity management and strategic account development, supported by Product and functional experts where appropriate.</li> <li>Build sales capabilities through regular coaching, performance reviews, development plans and succession planning, creating a strong and sustainable sales organization.</li> <li>Recruit and retain high-performing sales talent in cooperation with Human Resources and in accordance with DHL policies and processes.</li> <li>Ensure all commercial activities, proposals, pricing commitments and customer agreements comply with DHL policies, applicable legal and compliance requirements and the relevant Delegation of Authority. Contracts or deviations from standard commercial terms must follow the applicable approval process.</li> <li>Work closely with the Country Management Team and regional sales organization to align sales priorities, share market intelligence and support the overall country business strategy.</li> </ul>   <p><strong>Now, here is what we need from you! </strong></p> <table> <tbody> <tr> <td width="302"> <p><strong>Education Level</strong></p> </td> </tr> <tr> <td width="302"> <p>Bachelor’s Degree</p> </td> </tr> <tr> <td width="302"> <p><strong>Experience Level</strong></p> </td> </tr> <tr> <td width="302"> <p>More than 10 year</p> </td> </tr> </tbody> </table>   <p><strong>We offer:</strong></p> <ul> <li>Opportunities in a global company where you can contribute your ideas and skills to move towards our shared goals.</li> <li>Possible further career development</li> <li>Competitive salary</li> </ul> <p><strong>Why join DHL Global Forwarding?</strong></p>   <p>We are part of Deutsche Post DHL, the world’s leading logistics provider with operations in over 220 countries. Visit our career site on the web at <a href="https://www.logistics.dhl/us-en/home/careers.html">https://www.logistics.dhl/us-en/home/careers.html</a></p>   <p>Our <strong>TOP EMPLOYER prestigious certification</strong> attests to our best-in-class efforts to attract and retain talent by fostering a positive work environment and encouraging personal and professional development among employees. The development of talented women in our organization will be a focus for us and an important part of our DGF Strategy 2025. </p>   <p>We aspire to become the undisputed leader in our industry, <strong>when people think of forwarding; we want them to think DGF </strong>because we have:</p>   <ul> <li>The<strong> largest global network</strong> with more than 30,000 passionate employees</li> <li>The most <strong>efficient processes</strong> and <strong>fastest response times</strong></li> <li>The <strong>best solutions</strong> and <strong>best customer service</strong></li> </ul>   <p><strong>Our Vision: </strong>The Logistics Company for the World.</p> <p><strong>Our Mission: </strong>Excellence. Simply Delivered.<br> <strong>Our Purpose: </strong>Connecting People, improving lives.<br> <strong>Our Values: </strong>Respect & Results<br> <strong>Our Goals: </strong>Employer, Provider, and Investment of Choice, Living Responsibility</p>   <p><em>DHL Global Forwarding is an equal opportunity employer.  We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. </em></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules.</li><li>Maintains accurate parts inventory during all maintenance activities.</li><li>Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability.</li><li>Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc.</li><li>Diagnoses malfunctions, isolate causes and corrects breaks.</li><li>Tests engine operations, using testing equipment to locate source(s) of malfunction.</li><li>Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices.</li><li>Disassembles and inspects parts for wear, warping, or other defects.</li><li>Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories.</li><li>Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions.</li><li>May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li><li>Highly desired to have a U.S. Passport valid for an additional two years with at least two facing pairs (four total) of blank Visa pages.</li></ul><p></p></section>

Leading private university in Kuwait is currently recruiting full-time faculty members as Assistant Professors for its IST or CE Department to start from Fall Semester 2026.<br>Being an equal opportunity employer, it offers internationally competitive salaries, remuneration packages, research incentives, and professional development opportunities.<br>With faculty members and staff coming from more than 60 countries, it is a diverse and inclusive environment. Its campus provides cutting-edge facilities that faculty and staff can benefit from such as Sports Center, Library, Research and Innovation Center, Cultural Center, and more than 55 laboratories.<br>Job Requirements <br>A PhD Degree in Computer Science/Computer Engineering or a related major from an internationally accredited university is required. Excellent publication records, in particular during the last five years. Pursue academic achievements and have a demonstrable research capability. Publish his/her research findings in refereed journals. Have a solid commitment to teaching excellence and student advising at undergraduate level. Prepare teaching materials, maintaining and improving competence in subjects being taught. Proficiency in programming using Python, C++, C#, Java Script and/or Java. Have experience in RDBMS. Have experience in the fields of Immersive Technology is highly considered as an advantage. Have demonstrable skills in oral and written English. Having at least 2-3 years’ work experience in a reputed university or company in a relevant department. Industry experience is a plus for this position.<br>Job Description<br>Faculty members are engaged in teaching, services, research and professional development tasks. Successful candidates are expected to:<br>Significantly contribute to the advancement of the research activities and publish research findings in refereed journals. Have a strong commitment to teaching excellence and student advising at undergraduate level. Prepare teaching materials, maintain and improve competence in subjects being taught. Develop and deliver courses to students. Prepare class activities, quizzes, assessments and exams. Passionately support the college and departmental wide activities and services with a spirit of leadership, commitment, accountability, and collegiality. Evaluate, monitor and mentor student academic progress. Supervise and assist students in all aspects related to the courses. Guide, lead and mentor students in research projects. Engage actively in promoting the growth of the university and participate in strategic activities and events. Participate in departmental and college meetings and activities. Serve and support functional activities of departmental committees. Supervise and support TAs and lab instructors. Undertake any other duties as may be directed by the Head of Department.

Location: Kuwait<br><br>Salary: 1050 KWD plus Personal Training<br><br>Relocation support provided<br><br>About The Role<br><br>One of the most prestigious, high end private membership clubs in Kuwait is seeking an experienced Yoga/Barre Instructor to lead its fitness and wellness programming. This exclusive club combines luxury lifestyle, world class fitness, fine dining, and leisure facilities, providing an exceptional environment for both members and staff.<br><br>Role Responsibilities<br><br>Lead engaging, safe, and effective Yoga and Barre classes for members of all fitness levels. Design individualised exercise programs tailored to each member's goals and abilities. Demonstrate correct techniques, providing hands on guidance, alignment corrections, and progressions where needed. Deliver both group and one on one Yoga/Barre sessions with professionalism and enthusiasm. Coordinate the Yoga/Barre class schedule in collaboration with the management team, ensuring optimal utilisation during peak and off peak hours. Maintain accurate records of members, including medical histories, waivers, and training progress. Supervise and mentor part time and freelance Yoga/Barre instructors to maintain consistent quality standards. Ensure studio operations meet the highest standards of cleanliness, safety, and efficiency. Contribute to recruitment, training, and scheduling of Yoga/Barre staff as required. Support the organisation and delivery of Yoga/Barre related events, workshops, and member engagement activities. Provide exceptional customer service, resolving member feedback and maintaining a positive, professional presence. Uphold all safety, hygiene, and operational standards across the studio and related areas.<br><br>Candidate Profile<br><br>Recognised Yoga and/or Barre certification Proven experience teaching both private and group Yoga/Barre sessions. Strong understanding of anatomy, posture, flexibility, and injury prevention. Excellent communication and interpersonal skills, with the ability to motivate and inspire members. Organised, detail oriented, and capable of managing multiple responsibilities effectively. Professional appearance, positive attitude, and strong customer service mindset. CPR and First Aid certification preferred. Fluency in English essential; additional languages are an advantage.<br><br>Compensation And Benefits<br><br>Competitive salary package (exact details discussed during the interview process). Opportunity to work within one of the region's most prestigious wellness environments. Supportive and professional team culture focused on excellence and member experience. Access to premium fitness and leisure facilities.<br><br>This is an exceptional opportunity for an experienced Yoga/Barre professional to join a world class wellness operation, contribute to a culture of excellence, and inspire members to reach their full potential through expert instruction and personalised care.

Job description:<br><br> Job Summary The role of an IT Lead - PMO is one that requires an understanding of project management, organizational leadership and communication skills. The individual’s primary goal is to ensure that all projects assigned, within Digital portfolio are being managed and delivered effectively. <br>This individual will have outstanding communication skills, strong analytical and problem-solving skills as well as a genuine passion for retail. Strong presentation skills are required, as well as the confidence to manage multiple stakeholders from business teams, IT teams, external vendors and delivery partners. <br> Job Responsibilities • Manage large technical projects, define project plans, set priorities, manage resources and report on process, progress and results<br>• Provide day-to-day planning, coordination, and project management across the entirety of the software development and deployment life cycle<br>• Act as an owner, be solution-focused, analytical and drive projects from initiation to success<br>• Provide the project team with direction and vision, motivate individuals to perform, provide feedback, recognize strengths and provide challenges<br>• This is a highly visible position that will partner heavily with multiple business and technology teams and interact at all levels of the company<br>• Work closely with the product management team in full synergy to ensure that large scale projects are delivered on time and up to expectations.<br> Candidate Requirements Bachelor's degree in Computer Science, Information Systems, Software Engineering, or a related discipline. PMP, PRINCE2, or other recognized Project Management certification is preferred. Strong technical background with hands-on experience in software development and large-scale software systems. Minimum 5 years of experience leading complex, product-oriented technology projects. Proven experience managing large-scale projects involving multiple teams, stakeholders, and products. Strong analytical and problem-solving skills with the ability to make data-driven decisions. Proficiency in project management tools such as MS Project, Jira, Asana, or similar platforms. Experience working with SAP and/or other enterprise ERP systems. Good understanding of Agile delivery methodologies, including Scrum and Kanban. Demonstrated ability to manage multiple priorities simultaneously while delivering projects within agreed timelines. Strong planning skills with the ability to provide realistic effort estimates and drive project execution through to completion. Excellent stakeholder management, interpersonal, written, and verbal communication skills. Experience managing software vendors, implementation partners, and third-party service providers. Fluent in English, both written and spoken.

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As a Room Attendant, you’re not just ensuring the cleanliness of guest rooms – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br>Here's what you'll do during a typical day:<br><br>Keep guest rooms spotless: Clean and tidy assigned rooms, including making beds, cleaning bathrooms, dusting, vacuuming, and performing deep cleaning tasks as needed Replenish linens and amenities: Replace bed linens, towels, and guest essentials as needed Manage supplies: Stock, maintain, and transport the housekeeping supply cart daily Delight our guests: Respond to guest requests promptly and courteously Manage waste disposal: Dispose of trash and recyclables in designated areas: <br><br>Qualifications<br><br>What It Takes to Make the Stay<br><br>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

<p>The WADPM shall develop, revise, and maintain an airfield driving program to ensure the safe operations of vehicles, aircraft, and pedestrian movement on and around the airfield environment IAW DAFI 13-213, Airfield Driving. The WADPM shall solicit help from base senior leadership and other various base support agencies to ensure the program is effectively implemented and managed. The WADPM shall provide all initial and recurring airfield drivers training for all unit level Airfield Driving Program Manager (ADPMs) and all airfield drivers. The WADPM will ensure reporting of Controlled Movement Area Violations and other significant events in Amentum s MIS system, to appropriate Wing leadership, and as required in DAFMAN 13-204 and DAFI 13-213. The WADPM will conduct spot checks to enforce and monitor compliance with airfield driving procedures.</p><p>Primary Duties and Responsibilities:</p><ul><li>Serve as the Wing s designated Airfield Driving Program Manager, responsible for the full lifecycle of the Airfield Driving Program.</li><li>Develop, maintain, and update the Wing Airfield Driving Instruction (ADI), training and testing materials, and local operating procedures.</li><li>Train unit ADPMs and certify them to administer, test and train personnel assigned to their unit.</li><li>Conduct initial, recurring, and remedial airfield driving training, including classroom instruction, practical evaluations and competency assessments.</li><li>Maintain program records, training logs, violation reports, and certification documentation in accordance with DoD and USAF requirements</li><li>Manage the issuance, tracking, and revocation of Airfield Driving Licenses, ensuring compliance with DAFI 13-213 and local directives.</li><li>Oversee the Runway Incursion Prevention Program, including trend analysis, corrective actions, and coordination with Wing Safety</li><li>Lead investigations for airfield driving violations, runway incursions, and safety incidents; develop corrective action plans and report findings to Airfield Management leadership.</li><li>Conduct program audits of individual unit programs, spot checks, and unit compliance inspections to ensure adherence to airfield driving standards.</li><li>Provide recurring briefings to Wing leadership on program status, compliance issues, and risk mitigation measures.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have a *7-skill level from an approved DoD institution or civilian equivalent.</li><li>Have documented knowledge or experience with ICAO procedures.</li><li>Have a minimum of 1 year experience implementing airfield safety procedures and generating and facilitating airfield flight line drivers program.</li><li>Ability to coordinate with Wing Safety, Airfield Management, Airfield Operations, and tenant units.</li><li>Strong written and verbal communication skills for program documentation, briefings, and incident reporting.</li><li>Familiarity with airfield operations, ATC radio phraseology, airfield risk management, and airfield safety programs.</li><li>Ability to obtain/maintain a US Secret Clearance (Note: US Citizenship is required to obtain/maintain the clearance)</li></ul>

<p>POSITION SUMMARY Ensure staff is working together as a team to ensure optimum service and that guest needs are met. Inspect grooming and attire of staff, and rectify any deficiencies. Complete opening and closing duties including setting up necessary supplies and tools, cleaning all equipment and areas, locking doors, etc. Inspect storage areas for organization, use of FIFO, and cleanliness. Complete scheduled inventories and stock and requisition necessary supplies. Monitor dining rooms for seating availability, service, safety, and well being of guests. Complete work orders for maintenance repairs. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; and serve as a role model and first point of contact of the Guarantee of Fair Treatment/Open Door Policy process. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent.</p><p>Related Work Experience: At least 2 years of related work experience.</p><p>Supervisory Experience: At least 1 year of supervisory experience.</p><p>License or Certification: None</p>

<p><h4>Position summary</h4> <p>Our jobs aren’t just about giving guests a clean room and a freshly made bed. Instead, we want to build an experience that is memorable and unique. Our Guest Environment Experts are skilled in a wide range of housekeeping functions with responsibility for maintaining the appearance and cleanliness of the whole hotel. They are empowered to move about their space and do what needs to be done. Whether delivering guest requests, stocking carts, cleaning rooms and public spaces, or other similar responsibilities, the Guest Environment Expert makes sure the spaces in the hotel help create a great guest experience.</p> <p>No matter what position you are in, there are a few things that are critical to success – ensuring a safe workplace, following company policies and procedures, maintaining confidentiality, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional.</p> <p>Guest Environment Experts will be on their feet and moving around (stand, sit, or walk for an extended time) and taking a hands-on approach to work (move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance). Doing all these things well (and other reasonable job duties as requested) is critical for Guest Environment Experts – to get it right for our guests and our business each and every time.</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>The world is a big place and Marriott Executive Apartments offers temporary housing that feels like home in the biggest and best cities for business travel across Europe, Asia, Latin America, Africa, and the Middle East. Join the Marriott Executive Apartments team and help our guests adapt to a new locale and feel comfortable and cared for while living away from home.</p> <p>In joining Marriott Executive Apartments, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a dynamic and result-oriented Fire protection Engineer to drive business growth for our Fire Protection and Fire &amp; Gas (F&amp;G) Engineering Consultancy services. The successful candidate will be responsible for identifying new business opportunities, developing client relationships, preparing technical and commercial proposals, and converting opportunities into awarded projects across the Oil &amp; Gas, Petrochemical, Industrial, Power, Infrastructure, and Commercial sectors.</p><p>Identify and develop new business opportunities for Fire Protection and Fire &amp; Gas Engineering Consultancy services.</p><p>Develop and maintain a database of End Clients, EPC Contractors, PMC Consultants, and Industrial Customers.</p><p>Generate qualified leads through market research, networking, industry events, and client engagement.</p><p>Build strong relationships with key decision-makers within client organizations.</p><p>Conduct client meetings to understand project requirements and identify engineering consultancy opportunities.</p><p>Deliver technical and business presentations showcasing the company's capabilities and value proposition.</p><p>Coordinate with the engineering team to develop technical solutions and commercial proposals.</p><p>Prepare, submit, and negotiate technical and commercial proposals.</p><p>Follow up on submitted proposals and actively drive opportunities through to Purchase Order (PO) award.</p><p>Maintain an opportunity pipeline and provide regular sales forecasts and progress reports.</p><p>Monitor market trends, competitor activities, and upcoming projects.</p><p>Support prequalification submissions, vendor registrations, and framework agreements.</p><p>Participate in exhibitions, conferences, and industry networking events to enhance business visibility.</p><p>Business Development</p><p>Technical Sales</p><p>Client Relationship Management</p><p>Proposal Preparation</p><p>Lead Generation</p><p>Tender Management</p><p>Presentation Skills</p><p>Negotiation Skills</p><p>Market Intelligence</p><p>Strategic Planning</p><p>Number of new clients developed.</p><p>Number of qualified opportunities generated.</p><p>Value of proposals submitted.</p><p>Proposal-to-order conversion rate.</p><p>Annual sales/revenue achieved.</p><p>Customer satisfaction and retention.</p><p>Growth of key accounts and repeat business.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Mechanical, Fire Protection, Instrumentation, Electrical Engineering, or a related discipline.</li><li>10+ years of experience in business development, sales, or technical marketing within Fire Protection, Fire &amp; Gas Consultancy.</li><li>Experience in Oil &amp; Gas, Petrochemical, Industrial, Power, Infrastructure, or Commercial projects.</li><li>Knowledge of Fire Protection Systems, Fire Detection &amp; Alarm Systems, Gas Detection Systems, Passive Fire Protection.</li><li>Experience in the field of Sales and business development in Fire Protection and Fire &amp; Gas detection system Vendors in Kuwait</li><li>Familiarity with NFPA, API, IEC, FM, ISO, and client standards (e.g., KNPC, KOC and Other industrial clients) is an advantage.</li><li>Proven experience in proposal preparation, client presentations, and contract negotiations.</li><li>Excellent communication, presentation, negotiation, and interpersonal skills.</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook);</li><li>Valid Kuwait driving license is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Ensure staff is working together as a team to ensure optimum service and that guest needs are met. Inspect grooming and attire of staff, and rectify any deficiencies. Complete opening and closing duties including setting up necessary supplies and tools, cleaning all equipment and areas, locking doors, etc. Inspect storage areas for organization, use of FIFO, and cleanliness. Complete scheduled inventories and stock and requisition necessary supplies. Monitor dining rooms for seating availability, service, safety, and well being of guests. Complete work orders for maintenance repairs. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; and serve as a role model and first point of contact of the Guarantee of Fair Treatment/Open Door Policy process. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: high school diploma or G.E.D. equivalent.</li><li>Related Work Experience: At least 2 years of related work experience.</li><li>Supervisory Experience: At least 1 year of supervisory experience.</li><li>License or Certification: None</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> What you will be doing<br><br> * Create “sample” and “mood products” to visualize design concepts.<br> * Give advice on material, furniture and fabric costs and benchmark product options.<br> * Collaborate with interior designers and architects by providing material selection recommendations.<br> * Offer alternatives and insights based on your knowledge of different materials.<br> * Organise and maintain samples, catalogues, and resources related to interior design and architectural materials.<br> * Set costs and project fees according to the budget.<br> * Work closely with Interior Designers, architects, graphic designers, clients and contractors on design options, materials, samples and catalogues to assist selections.<br> * Work closely with interior designers, architects, and graphic designers and co-ordinate with clients and contractors as required.<br> * Responsible for curating and coordinating materials, furniture, fabric, and architectural elements used in interior design and architecture projects.<br> * Research and make suggestions on materials and product sourcing.<br> * Oversee industry representative visits for materials and launches.<br> * Interpret and translate customer needs into rough plans.<br> * Maintain organized records throughout the project lifecycle.<br> * Develop and maintain a network of supplier contacts to create a library of materials.<br> * Define project requirements and schedules during the initial briefing.<br><br><br>Required Experience<br><br> * Proven working experience in interior and architectural spaces including consultations, renovations, space planning and new constructions.<br> * Design firm / consultant experience.<br> * Dealt with suppliers to Interior Design / architecture functions.<br> * Excellent portfolio highlighting previous works.&nbsp;<br><br><br>Education<br><br> * Bachelor’s degree in interior design, Architecture, or similar field.<br><br><br>Certifications &amp; Memberships<br><br> * Additional training courses, professional and personal development with membership to professional groups, societies or institutes, desired.<br> * Training or certification in pavement design tools like AASHTO Ware Pavement ME Design or equivalent software is Preferable.<br> * LEED certification, desired.<br> * WELL Certification, desirable.<br><br>Essential Skills<br><br> * Creative, imaginative and with an eye for design. &nbsp;<br> * Detail minded ensuring quality work.&nbsp;<br> * Strong communication skills, ability to present.<br> * Able to Project manage, to deliver to quality and time.<br> * Organisational skills to handle multiple stakeholders and work demands.<br> * Process orientated to follow and uphold guidelines, standards, and requirements.<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">About the Role<br><br> * The primary role and responsibilities are to carry out activities to support material library management (interior design, architectural and graphics design) by assisting interior designers and architects with a variety of project related tasks, keeping up to date of and communicating current design, material and furniture trends, administering project archiving and storage standard processes and being a resource for all project teams.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Red Switch Technician II will supervisor Red Switch Technician I personnel and operate and maintain (O&amp;M) the Defense Red Switch Network (DRSN) facility in accordance with Defense Information Systems Agency (DISA) regulations and guidelines. Responsible for organizing and implementing system and facility upgrades with Raytheon, DISA, and local agencies. Prepare and maintain DRSN facility in accordance with various agency checklist requirements such as Quality Control (QC), DRSN Security, DISA Performance Evaluation (PE), Communications Security (COMSEC), etc. Train DRSN technicians and military deployment teams on operation, maintenance, and troubleshooting of equipment. Brief various levels of management within the civilian and military sector on DRSN operations and requirements. Responsible for ensuring subscribers are trained on the features and capabilities of their phone instruments and are operating their DRSN phones within the prescribed security requirements. Responsible for providing DRSN Operations and Maintenance (O&amp;M) support. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + O&amp;M of the Digital Small Switch (DSS-2A). Monitor trunk and circuit outages as well as the administrative terminal and Enhanced Command Console (ECC). + Perform direct trunk dialing checks on trunk channels associated with the switch to ensure satisfactory operation of voice circuits (at least once each shift and following any trunk failure). + Perform Preventive Maintenance Inspections (PMIs) on the switch and peripheral equipment. + Create and update databases in the administrative terminal using information received from users, Raytheon, and DISA. + Perform database backups to CD-R discs. + Perform database downloads to update switch configurations. + Update and print out telephone console information and line strips for users. + Fabricate custom interface cables using hand tools and wiring diagrams. + Escort individuals requiring access to the Red Switch in the performance of their duties. + Ensure that all outages are reported in a timely manner to the DISA GNOSC, NOC-K, TCF, V2X management for tracking in Army Enterprise Service Management Platform (AESMP) ticketing system. + Provide hourly status updates to designated agencies in regard to outages, etc. + Annotate all activities in the Master Station Log (MSL) database. + Prepare call detail history reports for DISA and military personnel as directed. + Contribute to weekly reports with regard to your additional duties and other assigned tasks. + Complete individual timesheets on a daily basis. + Check the Regional Cyber Center (RCC) website for accuracy with regard to authorized service interruptions (ASIs) and outages. + Initiate Quality Control checklists as they pertain to your additional duties. + Update training records as needed. + Update memorandums and technical drawings (including block diagrams and schematics) as directed. Inventory Communications Security (COMSEC) equipment and document DA Form 2653-R (each shift). + Work with military technical monitor(s), Special Security Office (SSO) and other Department of Defense contractors and civilians including local hires in support of the DRSN mission. + Interface with technicians from Outside Plant, DPW, etc. regarding installations in support of the DRSN mission. + Coordinate with the Raytheon Help Desk for troubleshooting problems that cannot be resolved locally. + Contact the Return Merchandise Authorization (RMA) Help Desk in order to obtain a RMA for processing depot equipment repairs. + Performs other duties and assignments as required. Qualifications + Qualifications: + Security Clearance: + Active Top Secret SSBI within the past two years. + Individual must be eligible for Sensitive Compartmentalized Information (SCI) Access. + Education / Certifications: One year of related experience may be substituted for one year of education, if a degree is required. + High School Diploma required. + Bachelor’s Degree in IT or related field preferred. + Cardiopulmonary Resuscitation (CPR) (Training provided by contract) + This position requires candidates to adhere to DISA requirement. All candidates are required to maintain at least one (1) baseline certification. + The authorized certification for this job title are listed as follows: + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + Seven years’ experience in Communications-Electronics Maintenance functions: + installation, troubleshooting and repair of electronic communications equipment. + Use of phone + Digital sender, and desktop computer in a fast-paced office environment is desirable. + A working knowledge of Microsoft Office software is required. Must be able to work rotating shift schedules which provide 24-hour day/7-day week coverage. + Military or civilian technical training course of six (6) months or more is required. + This should be followed by a minimum of 24 months of on-the-job training (OJT). + A certificate of completion will suffice until verification of the training on your DD-214 can be completed. + Experience with a customer service-oriented company. + SUPERVISORY / BUDGETARY RESPONSIBILITIES + At least two years of supervisory or lead experience is preferred. + Update proprietary applications regarding: + Update section employee daily status, leave, sick, on site, etc. + Verify and track accomplishment of section monthly or quarterly safety and compliance training + Purge section employee expired certifications + Verify section employee compliance training in Virtual Training Record + Verify section vehicle logs are being kept accurately and uploaded + Ensure section personnel are maintaining their 8570 / 8140 certifications + Review weekly training compliance reports for accomplishment prior to suspense. + Review and approve leave forms ensuring before approval all compliance training is current. + Coordinate transportation and integration of new and returning employees. + Document and promptly counsel poor performance and policy violations. + Enforce all V2X, GO 1, and dress code policies. + Provide annual employee appraisal feedback in a professional and constructive manner. + Demonstrate V2X values Integrity, Respect, Responsibility, and Professionalism. + Ensure the safety of personnel and monthly safety inspections are properly conducted. + Communicate effectively up and down the chain of command. + Manage work schedules. + Conduct proper new and returning employee orientation and ensure employee thorough understanding and can accomplish all tasks in the Employee Job Certification (EJC) + Work with employees and HR when emergencies or abnormal circumstances occur. + To the best of your ability render all decisions based upon our company values and principles of Integrity, Respect, Responsibility, and Professionalism. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components. A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access. Operationally checks repaired or modified systems for proper operation. Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment. Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks. Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft. Disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders. Ability to become qualified and perform engine runs for the aircraft type they are assigned to support. Ability to read, write, and interpret technical duties is required. Ability to communicate effectively with all levels of employees throughout the organization. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies. Perform other qualified duties as assigned. Minimum Requirements High school diploma or GED equivalent is Required. A valid (FAA) A&amp;P Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired. Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required. Six (6) months of flight line and overhaul &amp; inspection experience is preferred. Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait). A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa. Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training. May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20) Mechanic Pre-employment Medical Requirements: Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. Security Clearance Requirements: Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility. Physical and Additional Qualifications Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to carry, push or pull up to and may exceed 50 pounds. May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Must be able to distinguish color and judge three dimensional depths. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Must have minimum 20/100 near and far vision, correctable to 20/20. Must be capable of living and working in a potentially hostile environment for an extended period. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</li><li>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</li><li>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</li><li>High school diploma or GED equivalent is Required.</li><li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li><li>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li><li>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li><li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment.</li><li>Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li><li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li><li>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</li><li>Must be able to obtain and maintain a US Govt Secret Security Clearance.</li><li>Must be able to obtain and maintain facility credentials and authorization.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>JOB SUMMARY<br>Responsible for all front office functions and staff. Areas of responsibility include Bell Staff, Switchboard Operations, Guest Services/Front Desk and Retail/Gift Shop, as applicable. As a department head, directs and works with managers and employees to successfully execute all front office operations, including guest arrival and departure procedures. Strives to continually improve guest and employee satisfaction and maximize the financial performance of the department.<br>CANDIDATE PROFILE&nbsp;<br>Education and Experience<br>• High school diploma or GED; 4 years experience in the guest services, front desk, or related professional area.<br>OR<br>• 2-year degree from an accredited university in Hotel and Restaurant Management, Hospitality, Business Administration or related major; 2 years experience in the guest services, front desk, or related professional area.<br>CORE WORK ACTIVITIES<br>Leading Guest Services Team<br>• Utilizes interpersonal and communication skills to lead, influence, and encourage others; advocates sound financial/business decision making; demonstrates honesty/integrity; leads by example.<br>• Encourages and builds mutual trust, respect, and cooperation among team members.<br>• Serves as a role model to demonstrate appropriate behaviors.<br>• Supervises and manages employees. Manages all day-to-day operations. Understands employee positions well enough to perform duties in employees' absence.<br>• Establishes and maintains open, collaborative relationships with employees and ensures employees do the same within the team.<br>• Ensures recognition of employees is taking place across areas of responsibility.<br>• Communicates performance expectations in accordance with job descriptions for each position and monitors progress.<br>• Celebrates successes and publicly recognizes the contributions of team members.<br>Maintaining Guest Services and Front Desk Goals<br>• Achieves and exceeds goals including performance goals, budget goals, team goals, etc.<br>• Manages day-to-day operations, ensuring the quality, standards and meeting the expectations of the customers on a daily basis.<br>• Develops specific goals and plans to prioritize, organize, and accomplish your work.<br>• Keeps Front Office team focused on the critical components of operations to drive guest satisfaction and the desired financial results.<br>• Conducts department meetings and continually communicates a clear and consistent message regarding the Front Office goals to produce desired results.<br>• Reviews staffing levels to ensure that guest service, operational needs and financial objectives are met.<br>• Understands the impact of Front Office operations on the Rooms area and overall property financial goals.<br>• Manages department controllable expenses to achieve or exceed budgeted goals.<br>Managing Projects and Policies<br>• Ensures compliance with all Front Office policies, standards and procedures.<br>• Ensures property policies are administered fairly and consistently, disciplinary procedures and documentation are completed according to Standard and Local Operating Procedures (SOPs and LSOPs) and support the Peer Review Process.<br>Ensuring Exceptional Customer Service&nbsp;<br>• Provides services that are above and beyond for customer satisfaction and retention.<br>• Improves service by communicating and assisting individuals to understand guest needs, providing guidance, feedback, and individual coaching when needed.<br>• Supervises and managing employees. Managing all day-to-day operations. Understanding employee positions well enough to perform duties in employees' absence.<br>• Acts as the “Service Champion” for the Front Office and creates a positive atmosphere for guest relations.<br>• Displays leadership in guest hospitality, exemplifies excellent customer service, and creates a positive atmosphere for guest relations.<br>• Strives to improve service performance.<br>• Empowers employees to provide excellent customer service.<br>• Ensures that all Front Office areas have an atmosphere that is conducive to the overall guest experience.<br>• Reviews comment cards, guest satisfaction results and other data to identify areas of improvement.<br>• Responds to and handles guest problems and complaints.<br>• Observes service behaviors of employees and provides feedback to individuals and/or managers.<br>Managing and Conducting Human Resource Activities<br>• Identifies the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills.<br>• Provides guidance and direction to subordinates, including setting performance standards and monitoring performance.<br>• Establishes challenging, realistic and obtainable goals to guide operation and performance.<br>• Solicits employee feedback, utilizes an “open door” policy, and reviews employee satisfaction results to identify and address employee problems or concerns.<br>• Ensures employees are treated fairly and equitably.<br>• Manages employee progressive discipline procedures for Front Office Staff.<br>• Administers the performance appraisal process for direct report managers.<br>• Interviews and hires managers and hourly employee team members with the appropriate skills and in a timely manner to meet the business needs of the operation.<br>Additional Responsibilities&nbsp;<br>• Provides information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.<br>• Analyzes information and evaluating results to choose the best solution and solve problems.<br>• Informs and/or updates the executives, the peers and the subordinates on relevant information in a timely manner.<br>• Identifies and analyzes Front Office operational challenges and facilitates the development of solutions to prevent reoccurrence.<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. <br>JW Marriott&nbsp;is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p><strong>Requirements:</strong></p> <ul> <li>A valid FAA A&P Airframe and Powerplant Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>US citizenship is required to obtain a US government Secret Security Clearance and for facility access.</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Operationally check repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engine to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation using troubleshooting procedures and diagnostic test equipment to identify source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li> <li>Maintain knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid FAA A&P Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain required visas.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments in support of mission operations.</li> </ul> <h4>Medical and Security Clearance Requirements</h4> <ul> <li>All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</li> <li>Must be able to obtain and maintain a US government Secret Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials and authorization.</li> <li>US citizenship is required to hold a US government Secret Clearance and facility credentials and authorization to work at this facility.</li> </ul> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to a height of four feet and be required to lift up to 35 pounds to a height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through email and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Detail <p>Get the latest details.</p><br> <br> <p><b>Our Mission</b></p><br><p>At Palo Alto Networks®, we’re united by a shared mission—to protect our digital way of life. We thrive at the intersection of innovation and impact, solving real-world problems with cutting-edge technology and bold thinking. Here, everyone has a voice, and every idea counts. If you’re ready to do the most meaningful work of your career alongside people who are just as passionate as you are, you’re in the right place.</p><br><p><b>Who We Are</b></p><br><p>In order to be the cybersecurity partner of choice, we must trailblaze the path and shape the future of our industry. This is something our employees work at each day and is defined by our values: Disruption, Collaboration, Execution, Integrity, and Inclusion. We weave AI into the fabric of everything we do and use it to augment the impact every individual can have. If you are passionate about solving real-world problems and ideating beside the best and the brightest, we invite you to join us!</p><br>This role is remote, but distance is no barrier to impact. Our hybrid teams collaborate across geographies to solve big problems, stay close to our customers, and grow together. You will be part of a culture that values trust, accountability, and shared success where your work truly matters.<p><b>Job Summary</b></p><br><p><b>Your Career</b></p><br><p><br>The Solutions Consultant is the evolution of the traditional Sales Engineering role, aligning how we best serve our customers in understanding their environment, providing solution guidance and ensuring value realization in their investment with Palo Alto Networks. As a Solutions Consultant you provide technical leadership and expertise and guidance in your customer’s security transformation journey. You will play a key role in defining technical solutions that secure a customer’s key business imperatives and ensuring value realization of their investment with Palo Alto Networks. You evangelize our industry leadership in on-prem, cloud, and security operations services that establish PANW as your customer’s cybersecurity partner of choice.</p><br><p><br><b>Your Impact</b></p><br><ul><li>Curiosity is core to the Solutions Consultant role, and you see complex problems as opportunities to learn and deliver innovative solutions! You define your impact by:</li><li>Meeting and exceeding sales quotas by building and implementing strategic, technical account plans that target cross-platform solutions</li><li>Understands Key customer business requirements and has the ability to position, demonstrate and create high level designs across the entire PANW portfolio solutions creating business value for customers</li><li>Ability to drive customer adoption of Palo Alto Networks Platform. Building customer relationships by helping customers achieve increased productivity, operational efficiency, security efficacy, and greater flexibility to innovate</li><li>Conducting discovery to understand and articulate the key technical, operational, and commercial imperatives of your prospects and customers</li><li>Working closely with Professional Services, Customer Success and Specialist teams to ensure overall customer implementation and adoption of solutions</li><li>Demonstrating strong communication skills, influencing through effective presentations and customer-specific demos, and conducts technical engagements and workshops that are clear and impactful, simplifying complex ideas for various audiences</li><li>Leading successful technical validation efforts based on best practices to ensure technical win in assigned opportunities</li><li>Demonstrates Cross functional leadership driving collaboration and orchestrating supporting resources (Specialists, Channel Resources, Customer Support) to ensure a one-team approach that demonstrates a cohesive strategy</li><li>Promoting end-to-end solutions that include PANW and/or partner professional services to ensure customers realize business value sooner</li><li>Understanding the competitive landscape and effectively differentiating PANW's leadership in the cybersecurity space</li><li>Continuously investing in yourself to develop technical and professional skills that drive your ever-increasing contributions to success of our customers while actively participating within the Solutions Consultant community and at industry events</li><li>Identifying technical stakeholders and cultivating relationships with key personas to build and drive a security architecture transformation roadmap</li></ul><p><b>Qualifications </b></p><br><b>Your Experience</b><br><ul><li>6+ years experience in pre-sales/sales engineering</li><li>Skilled in at least one of the following Networking, Network Security, Cybersecurity, Private/Public Cloud Security, SOC/Endpoint or SASE</li><li>Experience in delivering cybersecurity solutions that solve technical challenges and influence new business initiatives is preferred</li><li>Influencing and gaining buy-in from key stakeholders, either in a customer-facing or internal role; prior experience in a pre-sales role is ideal</li><li>Creating and delivering technical presentations, workshops, or technical validation engagements</li><li>Experience in selling, designing, implementing, or managing one or more of the following solutions: Network Security, SASE, SaaS, CNAPP and/or SOC Transformation Technologies</li><li>Partnering with Customer Support functions to ensure successful implementation and adoption of sold solutions</li><li>Experience in complex sales involving long sales processes with multiple buying centers and multi-product solutions are preferred</li><li>This is a field sales position where travel requirements may be required to support in person customer meetings, please discuss with the recruiter on the specifics for this position.</li><li>Proficient in English and Arabic</li></ul><p><b>Our Commitment </b></p><br><p>We’re trailblazers that dream big, take risks, and challenge cybersecurity’s status quo. It’s simple: we can’t accomplish our mission without diverse teams innovating, together.</p><br><p>We are committed to providing reasonable accommodations for all qualified individuals with a disability. If you require assistance or accommodation due to a disability or special need, please contact us at <span><u>accommodations@paloaltonetworks.com</u></span>.</p><br><p>Palo Alto Networks is an equal opportunity employer. We celebrate diversity in our workplace, and all qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or other legally protected characteristics.</p><br><p>All your information will be kept confidential according to EEO guidelines.</p><br>Is role eligible for Immigration Sponsorship? No. Please note that we will not sponsor applicants for work visas for this position. <br> <br> Apply <p>Current Employees, apply here</p><br> <br> <br> </div>