Mechanical Design Engineer Jobs in Kuwait

<p>Responsible for reviewing, processing, and submitting OEM warranty claims while ensuring compliance with manufacturer policies and documentation requirements. Monitor claim approvals, rejections, and warranty records to maximize recovery and minimize discrepancies. Coordinate with Service, Parts, Inventory, and Technical teams to conduct audits, prepare reports, and drive continuous process improvements</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelors Degree or Diploma in Automotive/Mechanical Engineering with 3 5 years of experience in warranty administration and automotive aftersales operations.</p>

<p><h4>Job description</h4> <p>The SOC engineer is responsible for the design, implementation, configuration, and continuous optimization of ZainTECH's Security Operations Centre (SOC) technology platforms, ensuring secure, scalable, and resilient security monitoring services for enterprise and government customers across the MENA region.</p> <p>This is a hands-on engineering role focused on designing and maintaining Security Information and Event Management (SIEM), Security Orchestration, Automation and Response (SOAR), and supporting security technologies. The role owns the end-to-end lifecycle of security monitoring capabilities - from onboarding new log sources and developing detection content to automating operational workflows and continuously enhancing SOC performance - while ensuring solutions align with customer requirements, cybersecurity best practices, and operational standards.</p> <h4>Responsibilities</h4> <p><strong>SIEM & security platform engineering</strong><br> Design, implement, configure, and maintain enterprise SIEM and SOAR platforms supporting ZainTECH's Managed Security Services portfolio.<br> Deploy and maintain highly available, scalable, and secure SOC infrastructure across customer environments.<br> Manage platform upgrades, patching, configuration management, and lifecycle activities to ensure platform stability and performance.<br> Ensure SOC technologies remain aligned with operational, security, and customer requirements.</p> <p><strong>Detection engineering & security content</strong><br> Develop, maintain, and optimise SIEM detection content, including correlation rules, dashboards, reports, alerts, watchlists, and use cases.<br> Improve detection capabilities by analysing emerging threats, attack techniques, and operational trends.<br> Reduce false positives through continuous tuning and refinement of detection logic.<br> Map detection capabilities to recognised cybersecurity frameworks such as MITRE ATT&CK.</p> <p><strong>Platform integration & automation</strong><br> Integrate security technologies, cloud platforms, infrastructure, and third-party solutions into the SIEM ecosystem.<br> Develop custom parsers, connectors, and data ingestion mechanisms to support new customer environments.<br> Design and implement SOAR playbooks to automate investigation, enrichment, notification, and response activities.<br> Optimise data collection, normalisation, and event processing to improve operational efficiency.</p> <p><strong>Operational support & continuous improvement</strong><br> Provide technical support to SOC analysts during security investigations and major incident response activities.<br> Troubleshoot platform issues and perform root cause analysis to maintain service availability.<br> Produce technical documentation, implementation guides, and operational runbooks.<br> Identify opportunities to improve SOC maturity through automation, process optimisation, and engineering best practices.<br> Collaborate with cybersecurity consulting, incident response, product management, and delivery teams to continuously enhance Managed Security Services.</p> <h4>Our culture & code of conduct</h4> <p>At ZainTECH, we take pride in a culture built on collaboration, innovation, and uncompromising integrity. We are looking for individuals who share these values and are committed to customer-centricity and ethical excellence. All employees are expected to uphold our code of conduct, which serves as a guiding framework for responsible behavior across everything we do — from how we work with each other to how we engage with clients and partners globally.</p> <h4>Requirements</h4> <ul> <li>3-5 years of hands-on experience designing, implementing, and administering SIEM platforms within enterprise or Managed Security Services environments.</li> <li>Strong experience with one or more SIEM platforms such as Microsoft Sentinel, Splunk Enterprise Security, IBM QRadar, ArcSight, LogRhythm, or Elastic Security.</li> <li>Experience integrating multiple security technologies, including EDR, firewalls, IDS/IPS, cloud security platforms, identity platforms, and threat intelligence feeds.</li> <li>Working knowledge of Windows, Linux, networking, scripting, APIs, and automation technologies.</li> <li>Experience implementing SOAR platforms and security automation workflows.</li> <li>Knowledge of MITRE ATT&CK, threat intelligence integration, and detection engineering principles.</li> <li>Experience supporting enterprise cloud environments including Microsoft Azure, AWS, or Google Cloud Platform.</li> <li>Experience working within a Managed Security Services Provider (MSSP) environment.</li> <li>Bachelor’s degree in Cybersecurity, Information Security, Computer Science, Information Technology, Engineering, or a related field.</li> <li>Security+, CEH or any relevant certification preferred.</li> </ul></p><p></p>

✅ Elevator Technicians @ Kuwait<br><br> Technician <br><br> Job Id :100193736<br><br>Jobs<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>✅ *Jobs in the Elevator's field* @ Kuwait<br><br> Elevator *Technician (Call-back / Troubleshooting)* Elevator *Technician (Mechanical Installation)* Elevator *Technician (“Electrical” Commissioning)* *MUST HAVE working experience in Elevators* Basic salary may vary depending on experience level *Must have Visa 18 (transferrable)* Driver's License would be an advantage<br><br>Note: *"Experienced" candidates living outside Kuwait, can also apply*<br><br>Please send your CV & Civil ID to get an interview call.<br><br> Email: jobsinelevator@gmail.com Mobile: +965 97276771 _(DO NOT call)_<br><br>(Ensure to write the "Job Title" in the subject line of email/Whats App message)<br><br>#Please Share & Help jobseekers*<br><br>Industrial Materials & Equipment<br><br>Basic Details<br><br>Qualification<br><br>Posted : 30 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 97276771<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p>Prepare detailed civil, structural, architectural, and construction drawings based on engineering specifications and site requirements. Develop and modify 2D drawings using AutoCAD. Prepare plans, elevations, sections, details, layouts, and construction drawings. Prepare site layouts, grading plans, road layouts, drainage layouts, utility layouts, and infrastructure drawings. Prepare structural drawings for: Foundations and footings Columns and beams Slabs Staircases Retaining walls RCC structures Structural steel works Prepare detailed reinforcement drawings and bar detailing as per engineer's design. Prepare Bar Bending Schedule (BBS) when required. Develop formwork/shuttering drawings and concrete details. Prepare shop drawings, as-built drawings, and construction details. Incorporate revisions based on engineer, consultant, and client comments. Ensure drawings are prepared according to approved specifications and project standards. Coordinate drawings with Civil, Structural, MEP, Architectural, and Site Engineering teams. Review drawings for dimensions, levels, quantities, annotations, and technical accuracy. Conduct site visits and update drawings based on actual site conditions. Prepare as-built drawings based on completed site works. Maintain proper drawing registers, revisions, and document control. Assist engineers with BOQ, quantity take-off, material requirements, and project documentation. Coordinate with contractors, consultants, surveyors, and site supervisors to resolve drawing-related issues.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma or Bachelor's Degree in Civil Engineering / Civil Drafting / Architectural or related field. Minimum 3+ years of relevant experience as a Civil Draftsman. Strong hands-on experience with AutoCAD. Experience in construction, infrastructure, building, or civil engineering projects. Ability to work from engineering sketches, specifications, survey data, and site measurements. Good attention to detail and accuracy. Strong coordination and communication skills. GCC/Kuwait experience will be an advantage. Ability to work under project deadlines and coordinate with site teams.</p>

<p>E-portal is actively recruiting for the role of Senior Presales Network and Infrastructure Engineer. In this role, you will be the lead technical presales specialist for campus, branch, WAN, data center, private cloud, edge, server, storage, virtualization-led opportunities. The role bridges pure networking proposals with wider transformation outcomes such as resilience, automation, observability, TCO reduction, workload performance, and secure user experience. Roles and Responsibilities: Lead technical discovery for campus, branch, data center, private cloud, WAN, WI-FI, compute, storage and back-up requirements. Build integrated infrastructure architectures that combine network, security, compute, storage, virtualization, and automation rather than treating them as separate silos. Design infrastructure refresh, consolidation, and modernization roadmaps, including migration from legacy WAN or traditional campus networks to software-defined and automated environments. Create HLDs, BOMs, RFP responses, migration plans, and technical risk registers for enterprise and government bids. Run customer workshops, solution demonstrations, interoperability discussions, and proof-of-concept or pilot activities. Partner with delivery teams to ensure architecture integrity across implementation, tuning, optimization, and lifecycle support.</p><p><strong>Desired Candidate Profile</strong></p><p>To be considered for the role, you will need to meet the below criteria:<br>A minimum of 11 years of experience across enterprise networking and infrastructure, with strong exposure to SD-WAN, campus switching and wireless, network access control, data center fabrics, private cloud or HCI, compute and storage platforms, observability, and automation. Hold at least one current expert-level infrastructure certifications such as CCEI Enterprise Infrastructure, HPE Aruba Networking Certified Expert variants, Juniper JNCIE-ENT or JNCEI-DC, and VMware Certified Distinguished Expert. Bachelor degree. Master's degree is a plus. Majors preferred are in networks, systems engineering, or infrastructurarchitecture.</p>

Foreman <br><br> Job Id :100194032<br><br>Jobs<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Send cv only whatsapp 5 5 2 5 9 4 4 5 Driving license is must<br><br>Need electromechanical foreman with diploma in mechanical engineering and atleast 7 years of experience to work with fans and motors<br><br>Should have good knowledge about winding motor repairs etc<br><br>Basic Details<br><br>salary : 400 KD<br><br>Location : Ahmadi , Kuwait<br><br>Qualification<br><br>Posted : 24 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 55259445<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The SharePoint Administrator/Developer will provide enterprise-level SharePoint administration, development, and customer support to military and civilian users. This role requires expertise in SharePoint infrastructure design, deployment, customization, and maintenance to ensure optimal system performance and user experience. The administrator will be responsible for gathering business requirements, designing tailored SharePoint solutions, and implementing best practices for collaboration, document management, automation, and security. This position demands strong skills in SharePoint Online, SharePoint 2019, Power Platform (Power Automate, Power Apps, Power BI), and Microsoft 365 integration to enhance operational efficiency. The candidate will work closely with stakeholders to analyze business needs, develop scalable solutions, and ensure compliance with enterprise security policies and military standards. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p><strong>Responsibilities</strong></p><ul><li>Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level.</li><li>Manage SharePoint Enterprise Search, including index configurations and scheduling.</li><li>Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours.</li><li>Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring.</li><li>Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI).</li><li>Develop and maintain high-level technical and engineering documentation.</li><li>Act as the SharePoint subject matter expert, providing training and end-user support.</li><li>Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM).</li><li>Customize SharePoint Online and SharePoint 2019 sites using modern design templates, JSON formatting, and adaptive cards.</li><li>Develop, automate, and manage workflows using Power Automate (Flow) and Microsoft Forms.</li><li>Ensure compliance with Zero Trust Security models, Microsoft Security &amp; Compliance Center policies, and Information Assurance (IA) standards.</li><li>Apply Security Technical Implementation Guidelines (STIGs) for governance and security.</li><li>Troubleshoot site-related issues, manage user permissions, and assist with site creation and configuration.</li><li>Automate SharePoint administration tasks using PowerShell and Microsoft Graph API.</li><li>Assist database administrators with configuring and monitoring SQL Server databases supporting SharePoint.</li><li>Performs other duties and assignments as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Requires an active Secret Clearance.</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience.</li><li>Associate Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field.</li><li>This position requires candidates to adhere to DoD 8570.01. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. The authorized certifications for this job title are listed as follows: BASELINE: Cisco: CCNA: Certified Network Associate - Security Cisco: CCNP: Certified Network Professional - Security CompTIA: CASP+ ce: Advanced Security Practitioner CompTIA: Security+ ce CompTIA: SecurityX ce GIAC: GCED: Certified Enterprise Defender GIAC: GCIH: Certified Incident Handler GIAC: GICSP: Industrial Cyber Security Professional GIAC: GSEC: Security Essentials ISC2: CISSP ( or Associate ): Certified Information Systems Security Professional COMPUTING ENVIRONMENT (CE): Microsoft: 365 Certified: Enterprise Administrator Expert Microsoft: Certified: Azure Database Administrator Associate Microsoft: Certified: Azure Security Engineer Associate Microsoft: Certified: Azure Solutions Architect Expert Microsoft: MCA: Certified Architect ( Any ) Microsoft: MCITP: Database Administrator 2008 Microsoft: MCITP: Database Developer 2008 Microsoft: MCITP: Enterprise Administrator Microsoft: MCITP: SharePoint Administrator 2010 ( Technical III for SharePoint Admin only ) Microsoft: MCSA: Certified Solutions Associate: SQL Server 2012 Microsoft: MCSA: SQL 2016 Database Admin Microsoft: MCSA: SQL 2016 Database BI Development Microsoft: MCSA: SQL 2016 Database Dev Microsoft: MCSA: Windows Server 2008/2012/2016 Microsoft: MCSD: Microsoft Certified Solutions Developer ( Any ) Microsoft: MCSE: Core Infrastructure Microsoft: MCSE: Data Management and Analytics Microsoft: MCSE: Productivity Solutions Expert</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience.</li><li>At least five years of hands-on experience with Windows Server administration and Active Directory management, with a strong understanding of security principles, access controls, and compliance best practices in an enterprise environment.</li><li>Expert proficiency in web design and development, including HTML5, CSS3, JavaScript, and modern SharePoint Framework (SPFx), React, and TypeScript.</li><li>Proven ability to develop, deploy, and manage SharePoint web parts, lists, libraries, and workflows while designing, maintaining, and administering SharePoint portals.</li><li>Strong documentation skills with the ability to create technical documentation, user guides, and training materials, along with the capability to interact with key stakeholders, gather business requirements, and translate them into effective SharePoint solutions.</li><li>Experience working with Infrastructure, Web Servers (IIS), SharePoint Administration, and Microsoft 365 integration, as well as knowledge of Power Platform (Power Automate, Power Apps, Power BI) for workflow automation and business process optimization.</li><li>Experience with a customer service-oriented company.</li></ul>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<ol><li><p>Inspect and ensure compliance of welding, piping, NDE, hydrotesting and painting/coating activities with project specifications, ITPs and applicable codes.</p></li><li><p>Review method statements, ITPs, quality procedures and contractor documents before work execution.</p></li><li><p>Conduct stage, final, witness and surveillance inspections and coordinate with Client/TPI.</p></li><li><p>Perform welder qualification, special welding, NDE, hydrotest, line walk and mechanical walkdown inspections.</p></li><li><p>Raise and follow up NCRs, punch items and corrective actions until closure.</p></li><li><p>Verify inspection records, test certificates and quality dossiers and update Aconex/QUEST/InTouch.</p></li><li><p>Support site construction teams on quality requirements and technical clarifications.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>10+ years of QA/QC and inspection experience in Oil & Gas / EPCC / Engineering projects.</p></li><li><p>Strong experience in Welding, Piping, Pipeline, NDE and Painting/Coating inspection.</p></li><li><p>ASNT Level II certification in applicable NDE methods.</p></li><li><p>Good knowledge of ASME Sec. V, VIII & IX and AWS D1.1.</p></li><li><p>Mechanical Engineering Diploma/Bachelor’s degree preferred.</p></li><li><p>CSWIP 3.1 / AWS equivalent and BGAS certification preferred.</p></li><li><p>Experience in NCR management, QA/QC documentation and ISO 9001 auditing preferred.</p></li></ol>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a detail-oriented Project Manager in the Fit-Out &amp; Joinery sector, based in Al Kuwait, to lead projects that emphasize precision and excellence. This role is pivotal in ensuring that every aspect of a project, from initial design to final finishing, meets our high standards. As a Project Manager, you will not only oversee project timelines and budgets but also ensure that all technical details and MEP (Mechanical, Electrical, and Plumbing) plans are meticulously followed, providing our clients with spaces that are both functional and visually appealing.</p><p>In this position, you will join a collaborative team that values attention to detail and fosters a culture of continuous improvement. We are committed to professional development and will provide you with opportunities for training and learning in the latest fit-out techniques and project management methodologies. Your ability to spot small details will be crucial in maintaining the quality and integrity of our projects, and we encourage you to bring your unique insights to the table.</p><p>As you lead various projects, you will play a significant role in shaping the environments we create, ensuring that every finishing touch reflects our commitment to quality. Your strategic oversight will not only enhance client satisfaction but also contribute to the overall success and reputation of our company. We prioritize career progression and will support your growth within the organization, helping you to achieve your professional aspirations in a thriving industry.</p><p><b>Responsibilities:</b></p><ol><li>Oversee the planning and execution of fit-out and joinery projects, ensuring all technical details and MEP plans are accurately incorporated into the project scope, leading to high-quality outcomes.</li><li>Coordinate with architects, designers, and contractors to ensure project specifications are met, utilizing project management software to track progress and facilitate effective communication among team members.</li><li>Conduct regular site inspections to monitor project progress and quality, identifying any potential issues early on and implementing effective solutions to ensure project continuity.</li><li>Manage project documentation, including contracts, change orders, and progress reports, ensuring all paperwork is accurate and comprehensive to support project transparency and accountability.</li><li>Develop and maintain strong relationships with clients, acting as the primary point of contact and ensuring their needs and expectations are met throughout the project lifecycle, particularly concerning finishing details.</li><li>Lead project meetings with stakeholders to discuss updates, address concerns, and align on project goals, fostering a collaborative environment for all parties involved in the project.</li><li>Monitor project budgets and expenditures, providing regular financial reports and forecasts to ensure projects remain financially viable and within agreed-upon scope.</li><li>Implement best practices in project management and risk assessment, continuously seeking opportunities for process improvements that enhance efficiency and effectiveness in project delivery.</li><li>Mentor and guide junior team members, sharing knowledge and expertise to foster a culture of learning and professional growth within the project management team.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong leadership skills to effectively manage teams and drive project success with a focus on technical accuracy.</li><li>Excellent communication abilities for clear interaction with clients and stakeholders, ensuring all details are conveyed effectively.</li><li>Proficiency in project management software to streamline project tracking and documentation, particularly for MEP plans.</li><li>Deep understanding of fit-out and joinery processes to ensure quality and compliance with technical specifications.</li><li>Strong attention to detail to identify and rectify small issues that could impact project outcomes and finishes.</li><li>Financial acumen to manage budgets and forecasts accurately, ensuring projects remain within financial constraints.</li><li>Ability to mentor and develop junior team members, fostering a collaborative team environment focused on detail-oriented project execution.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. <br>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p>Job Overview Weatherford is seeking a skilled and results-driven Field Specialist III MPD to join our team. This pivotal role is responsible for optimizing MPD and drilling processes, enhancing efficiency, and driving profitability. The ideal candidate will work closely with country and regional team to ensure accurate reporting and compliance. Additionally, this role plays a key part in conducting Operations safely and with minimal interruption to drilling. The job requires occasional package preparation in the Weatherford base where full compliance to Weatherford performance standards is required.</p><p>Responsibilities:</p><p>Conducts maintenance of the Managed Pressure Drilling Services equipment at the job site and workshop when required.</p><p>Responsible for daily MPD reporting, hydraulic calculations, simulations and supervises shift personnel.</p><p>At the discretion of product line management (such as the Engineering Manager, Operations Manager, or their designee) will be responsible for working in the shop. This will include but not limited to green tagging, preparing, and/or assisting with shipping equipment to job site.</p><p>Rig up, operate and perform troubleshooting of the Managed Pressure Drilling Services equipment at the job site or workshop, ensure all paperwork and HSE requirements are met and complied with</p><p>Perform green tagging, In Casing Test, or other operational activities required on location or in the shop and all documented procedures for the Managed Pressure Drilling Services equipment on location.</p><p>Perform all RCD operations and monitoring.</p><p>Performs field operations of Managed Pressure Drilling Services equipment including operating the MPD Choke from the Operator s Panel</p><p>Troubleshoot all electrical/electronic components and repair/maintain chokes and other mechanical equipment as necessary.</p><p>Completes all the necessary reports/paperwork related to Managed Pressure Drilling Services operations.</p><p>Keeps updated on all inspection requirements for the Managed Pressure Drilling Services equipment on the job site and in the shop.</p><p>Demonstrate and apply knowledge and understanding of all matters related to the Managed Pressure Drilling Services equipment and accessories.</p><p>Provides onsite job support to include but not limited to: mechanical, hydraulic functionality, revision changes, compatibility issues, troubleshooting, system versions, of Managed Pressure Drilling Services components.</p><p>Keep updated on Managed Pressure Drilling Services equipment, mechanical and hydraulic equipment manufacturing or regulatory standards.</p><p>Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions</p><p>Comply with Weatherford and client Quality, Health, Security and Environment (QHSE) procedures and documentation on site for specific shift.</p><p>Document all jobs and incidents in the Weatherford Performance Tracking System (WPTS).</p><p>Participate in the Permit to Work process.</p><p>Actively participate in ToolBox talks.</p><p>Must understand and comply with all safety rules and company policies of Weatherford</p><p>Required to complete the competency and training requirements identified by Global and Regional Management.</p><p>Complete training in order to meet the minimum HSE certification and technical requirements required perform their jobs</p><p>Perform all duties regarding Managed Pressure Drilling Services and Weatherford assigned by management or supervisors within the physical demand of the job description.</p><p>Skills</p><p>Mechanical ability necessary to perform repairs</p><p>Excellent Microsoft Outlook, Word and Excel computer skills</p><p>Self-motivator, self-starter</p><p>Good oral and written communication skills</p><p>Must be able to follow instructions</p><p>Able to work closely with fellow employees</p><p>Customer focused.</p><p>General understanding of products and their application.</p><p>Individual must be adaptive to change, have multi-tasking ability.</p><p>Ability to work in a team environment.</p><p>Ability to work in high and cold temperature environment</p><p>Should be able to work closely with all levels of personnel and outside contractors.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications: 3 - 5 years related to MPD field experience Bachelor's degree Strong MPD knowledge #LI-MD1</p>

<p>Burgan Company for Well Drilling, Trading, Maintenance. KSC is expanding its operations and is seeking experienced and motivated professionals to join our drilling teams. We are currently recruiting for the following positions:</p><p>Senior Maintenance Crew:</p><ul><li>Mechanical Maintenance Manager (Residential)</li><li>Electrical Maintenance Manager (Residential)</li><li>Electrical Maintenance Superintendent (Residential)</li><li>Mechanical Maintenance Superintendent (Residential)</li></ul><p>QHSE Crews</p><ul><li>QHSE Manager (Residential)</li><li>QHSE Superintendent (Residential)</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Do you enjoy working with cutting-edge energy equipment?</b></p><br><p><b>Do you love collaborating with teams to solve complex problems?</b></p><br><p><b>Join our innovating Field Services team</b></p><br><p>Our Oilfield Services Team is assembling and testing the latest products of oilfield equipment, which is beating heart of our work. We collaborate with our development teams in science, mechanical and electrical engineering, physics, geoscience, to develop innovative drilling tools.</p><br><p><b>Partner with the best</b></p><br><p>The responsibility is to supervise drilling of oil &amp; gas wells across India in different drilling environments.</p><br><p><b>You will be responsible for:</b></p><br><ul><li>Developing and demonstrating proficiency in the skill profile required for the delivery of assigned Directional Systems services at the well site.</li><li>Completing successful advanced technical training and assigned well site development programs.</li><li>Conducting all business activities in accordance with Baker Hughes HSE policies ,Legal Compliance requirements and Baker Hughes Core Values.</li><li>Maintaining frequent intra-organizational and external customer contacts with a high degree of professionalism</li></ul><p><b>Fuel your passion</b></p><br><p><b>To be successful in this role you will:</b></p><br><ul><li>Have 3 years of experience in Directional Drilling</li><li>Be a Petroleum or Mechanical engineering graduate</li><li>Have an Industry experience and product-line training required.</li><li>Have a basic knowledge of MWD</li><li>Have a good mechanical aptitude.</li></ul><p><b>Work in a way that works for you</b></p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p><br><p>This role is a shift based working pattern. Please talk to us about the specific working patterns available when you apply.</p><br><p><b>Working with us</b></p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.</p><br><p><b>Working for you</b></p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><br><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits</li></ul>The Baker Hughes internal title for this role is: FIELD SPEC IV - LWD/DD </div>

<p>Under strict supervision, performs repairs, preventative maintenance, calibration, and inspections on down-hole tool electronics and other equipment used in the application for down-hole tools, including Directional/ RSS or M/LWD sensors. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Areas of specialization may include: mechanical aptitude, electronics aptitude, computer skills, assembly and disassembly of tools associated with PSL equipment, or Measure while drilling and/or Logging While Drilling down-hole tools.</p><p><strong>Desired Candidate Profile</strong></p>Requires a technical school certificate, or equivalent. An associate degree or higher is preferred.

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Supports an aircraft ground equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.</p> <p>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.</p> <p>USAF equivalent position is AGE Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</li> <li>Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</li> <li>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</li> <li>Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual AGE maintenance experience required.</li> <li>Must be qualified with most basic types and uses of AGE equipment.</li> <li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Vehicle operator training.</li> <li>AGE mechanic experience within the last 10 years.</li> </ul></p><p></p>

Others<br><br> Job Id :100195354<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Location: Sulaibiya, Kuwait<br><br>Industry: Manufacturing / Refrigeration<br><br>Requirements<br><br> Minimum 1-2 years’ experience in a similar role Diploma (Mechanical, Electrical, or Refrigeration preferred) Knowledge of quality control standards and inspection techniques Experience in manufacturing or refrigeration industry preferred Experience with QC tools Knowledge of MS Office<br><br>Transferable Article 18 visa required<br><br>Candidates currently available in to join immediately are preferred<br><br>Apply now: Send your CV to careers@alhasawi.com<br><br>Subject: Asst. QA Inspector<br><br>Basic Details<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : careers@alhasawi.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a motivated and detail-oriented Civil Site Engineer to join our team in Al Kuwait. In this role, you will play a crucial part in managing construction projects, ensuring they meet quality and safety standards. , This will allow you to work on a variety of projects that contribute to the development of our community.</p><ol><li><b>Responsibilities:</b>Oversee daily operations on construction sites, ensuring compliance with safety regulations and project specifications while utilizing safety management software to mitigate risks.</li><li>Collaborate with architects and project managers to review blueprints and project plans, ensuring all designs are feasible and meet client expectations.</li><li>Manage project timelines and budgets by employing project management tools to track progress and report on any variances to stakeholders.</li><li>Conduct regular site inspections to monitor construction progress, addressing any issues promptly and ensuring quality standards are met.</li><li>Coordinate with subcontractors and suppliers to ensure timely delivery of materials while maintaining effective communication regarding project needs and changes.</li><li>Prepare detailed reports on project status, including progress updates and budget assessments, using reporting software to keep all stakeholders informed.</li><li>Implement and monitor quality control measures throughout the construction process, ensuring that all work is executed according to established standards and specifications.</li><li>Assist in resolving technical issues that arise during construction by applying engineering principles and collaborating with other engineers and technicians.</li><li>Participate in project meetings, providing insights and recommendations for improvements based on site observations and data analysis.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficiency in AutoCAD and other design software for creating and modifying engineering plans.</li><li>Strong understanding of construction materials and methods to ensure quality and sustainability.</li><li>Excellent communication skills for effective collaboration with team members and stakeholders.</li><li>Ability to manage multiple projects simultaneously while maintaining attention to detail.</li><li>Knowledge of construction safety standards and regulations to ensure compliance on-site.</li><li>Familiarity with project management software to streamline workflow and reporting.</li><li>Experience in Kuwait: 3-5 years</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary <br></span><p>The Senior Landscape Architect leads and manages a range of landscape architecture projects from conceptualization through to successful completion, with increasing independence. This role requires a strong design vision, technical proficiency, and effective client management skills. The Senior Landscape Architect is responsible for creating innovative, sustainable, and functional landscape designs that meet client objectives, adhere to regulatory standards, and enhance the environment, while receiving guidance on more complex projects and strategic client interactions.</p><br><br><br>Job Responsibilities <br><p>•&nbsp;&nbsp; &nbsp;Take responsibility for leading landscape architecture projects, including developing project plans, managing schedules and budgets under guidance, and ensuring projects are delivered on time, within budget, and to high standards of client satisfaction.<br>•&nbsp; &nbsp; Develop innovative, sustainable, and aesthetically compelling landscape designs that thoughtfully respond to client needs, environmental context, and site-specific conditions. Produce high-quality design drawings, detailed specifications, compelling 3D visualizations, and persuasive presentations to effectively communicate design intent, with review and input from senior staff.<br>•&nbsp;&nbsp; &nbsp;Provide strong technical expertise in critical areas such as site grading and earthwork, comprehensive drainage solutions, efficient irrigation system design, appropriate plant selection (considering local ecology and sustainability), and the specification of suitable and durable materials. Ensure all designs comply with relevant local regulations, zoning ordinances, and environmental protection standards, seeking guidance on complex technical issues.<br>•&nbsp;&nbsp; &nbsp;Serve as a key point of contact for clients throughout the project lifecycle, capably presenting design concepts, proactively gathering and incorporating feedback, and ensuring consistent alignment with the overarching project vision, with support from senior staff on strategic client management. Skillfully facilitate and lead stakeholder meetings, effectively managing client expectations and fostering strong working relationships.<br>•&nbsp;&nbsp; &nbsp;Effectively supervise, mentor, and provide guidance to junior landscape architects and landscape designers. Review their work to ensure quality and accuracy, and actively contribute to their professional development by fostering a collaborative, innovative, and knowledge-sharing work environment.<br>•&nbsp;&nbsp; &nbsp;Support the integration of advanced sustainable design principles into all projects, including sophisticated water conservation strategies, the selection and integration of native and adapted plant species, the optimization of energy efficiency in landscape systems, and the specification of environmentally responsible materials. Remain updated on environmental trends and incorporate best practices into design solutions.<br>•&nbsp;&nbsp; &nbsp;Manage multiple projects concurrently, skillfully balancing project scope, meticulously tracking schedules, and efficiently allocating resources, with oversight and support from senior staff. Collaborate seamlessly with project managers and other allied design professionals to ensure integrated and successful project delivery.<br>•&nbsp;&nbsp; &nbsp;Establish and maintain strong working relationships with external consultants, including civil engineers, urban planners, architects, and contractors, to ensure the seamless integration of landscape designs with all other project components. Proactively ensure that the design intent is consistently maintained and effectively communicated through all phases of the project.</p><br><br><br>Candidate Requirements <br><p>•&nbsp;&nbsp; &nbsp;Bachelor’s degree in Landscape Architecture from an accredited institution.<br>•&nbsp;&nbsp; &nbsp;Professional Landscape Architect (PLA) license or equivalent certification is preferred or actively working towards it.<br>•&nbsp;&nbsp; &nbsp;Minimum 3-5 years of progressive professional experience in landscape architecture, demonstrating increasing levels of responsibility and project complexity.<br>•&nbsp;&nbsp; &nbsp;Proven track record of successfully contributing to and managing a diverse portfolio of landscape architecture projects.<br>•&nbsp;&nbsp; &nbsp;Strong proficiency in industry-standard CAD software (e.g., AutoCAD, Civil 3D), BIM software (e.g., Revit), 3D modeling and visualization software (e.g., SketchUp, Lumion, Enscape), and GIS software.<br>•&nbsp;&nbsp; &nbsp;Good knowledge of local regulations, zoning codes, environmental standards, and permitting processes in Kuwait.<br>•&nbsp;&nbsp; &nbsp;Excellent communication, presentation, and interpersonal skills, with the ability to effectively articulate design concepts to diverse audiences.<br>•&nbsp;&nbsp; &nbsp;Demonstrated ability to guide and mentor junior design staff.<br>•&nbsp;&nbsp; &nbsp;Solid understanding of sustainable design principles and practices.<br>•&nbsp;&nbsp; &nbsp;Proven ability to manage project budgets and schedules effectively under supervision.<br>•&nbsp;&nbsp; &nbsp;Active participation in professional organizations and a commitment to ongoing professional development.<br>&nbsp;</p><br><br><br>Education <br>Bachelor’s Degree<br><br><br><br> </div>

Sales <br><br> Job Id :100195339<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Urgent Requirement for Outdoor Sales Executive & Forklift Technician<br><br>Outdoor Sales Executive – Kuwait<br><br>We are looking for an experienced Outdoor Sales Executive to join our team. Our Products are :Diesel Forklifts,LPG / Petrol Forklift Trucks,Internal Combustion Forklifts,Electric Counterbalance Trucks,Electric Reach Trucks,Electric Tri-Lateral Stackers / VNA,Electric High Lift Order Pickers,Electric Platform Scissor Lifts,Electric Pedestrian Pallet Trucks,Electric Stackers,Hand Pallet Trucks.<br><br>Our service includes Forklift Services,Maintenance and repair for electric, diesel and LPG trucks. Industrial Services,Dock, door, conveyor and facility support. Warehouse Technology,Inventory control and warehouse systems.<br><br>Requirements<br><br>Minimum 3 years of experience in retail/outdoor sales.<br><br>Excellent communication and customer-handling skills.<br><br>Strong knowledge of the Kuwait market is preferred.<br><br>Candidates from Kerala are preferred.<br><br>Ability to achieve sales targets and develop new customers.<br><br>Willingness to visit customers, take orders, and generate new business.<br><br>Ability to maintain strong and long-term relationships with customers.<br><br>A valid Article 18 transferable visa is required.<br><br>Immediate joining is preferred.<br><br>A valid Kuwait driving license and personal car are mandatory.<br><br>If you meet the above requirements and are interested in joining our team, please send your updated CV to:<br><br>???? info@mgtckw.com<br><br>Urgent Requirement – Forklift Technician<br><br>We are looking for an experienced Forklift Technician to join our team in Kuwait.<br><br>Key Responsibilities<br><br>Diagnostics & Repair: Identify and repair faults in forklift engines, electrical systems, hydraulic systems, and mechanical components.<br><br>Preventive Maintenance: Conduct regular inspections, servicing, and preventive maintenance to minimize unexpected equipment breakdowns.<br><br>Troubleshooting: Handle emergency repairs and breakdowns at warehouses, ports, industrial sites, and other customer locations.<br><br>Safety Compliance: Ensure all repaired and maintained equipment complies with applicable local and international safety standards.<br><br>On-Site Service: Travel to different customer and warehouse locations across Kuwait to provide maintenance and repair services.<br><br>Job Requirements<br><br>Education: Diploma or ITI qualification in Mechanical or Electrical Engineering.<br><br>Experience: Minimum 3 to 8 years of hands-on experience working with Material Handling Equipment (MHE), including forklifts, reach trucks, pallet jacks, etc.<br><br>Technical Skills: Strong knowledge of diesel and electric systems, hydraulic systems, and mechanical components.<br><br>Experience with brands such as Toyota, Linde, or Jungheinrich will be a major advantage.<br><br>Ability to work independently and handle on-site service and repair requirements.<br><br>Willingness to travel to different customer/warehouse locations in Kuwait.<br><br>Transferable Article 18 (Ahli) visa is required.<br><br>Candidates of any nationality may apply.<br><br>Immediate joining is preferred.<br><br>If you meet the above requirements and are interested in joining our team, please send your updated CV to:<br><br>???? info@mgtckw.com<br><br>Jobboard subscription<br><br>Basic Details<br><br>Location : Fahaheel , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : info@mgtckw.com