Mechanical Design Engineer Jobs in Kuwait

<p><h4>Job description</h4> <p>The aircraft mechanic II - powerplant/engine – back shop mechanic (T700/701C/D, T55-714) with experience in all three MDS UH60, CH47 & AH64 performs and inspects aviation unit (AVUM), intermediate (AVIM) and depot maintenance on assigned aircraft systems.</p> <p>Perform maintenance and repair of major assemblies and subassemblies of the T700/701C/D, T55-714 and auxiliary power units.</p> <p>Inspect engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks.</p> <p>Perform blade blending and blade replacement in cold section of powerplants.</p> <p>Replace or repair worn or damaged components, such as generators, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves.</p> <p>Ability to perform hot section inspections and determine replacement of hot section components (GG rotors, stators, fuel injectors, igniters, power turbine).</p> <p>Disassemble and inspect parts for wear, cracks, security, or other defects.</p> <p>Perform engine removal, replacement, reinstallation, and quick-change assembly (QCA) maintenance tasks.</p> <h4>Minimum requirements</h4> <ul> <li>High school graduate or equivalent is required.</li> <li>Five (5) years of recent applicable aircraft maintenance experience is required.</li> <li>With A&P: two (2) years aviation maintenance experience, and two (2) years' experience on MDS UH60, CH47, & AH64 is required.</li> <li>Without A&P: must have three (3) years aviation maintenance experience, three (3) years rotary wing aircraft experience and two (2) years on the assigned mission design series UH-60, AH-64, CH-47 (MDS) to qualify.</li> <li>All experience must be within the five (5) most recent years.</li> <li>Must be in possession of a valid U.S. passport for travel internationally. Passport must contain a minimum of 6 blank pages and 2 years remaining before expiration date.</li> <li>Ability to obtain/maintain a US government security clearance (NAC-I T1) public trust. US citizenship is required to obtain a security clearance, and for facility access to this site.</li> <li>Able to clear CENTCOM MOD physicals requirement for deployment (attend CRC).</li> <li>Must be able to obtain Kuwait visa.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li> <li>Thorough knowledge of aircraft electrical and avionics component and system troubleshooting, repair procedures and replacement of parts.</li> <li>Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>May work in aircraft maintenance hangar or outside.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift up to 50 pounds.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to see imperfections, micrometer readings and other small scales.</li> <li>Must be able to communicate by voice and detect sound by ear.</li> <li>Must be able to distinguish color and judge three-dimensional depth.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> </ul> <h4>Compensation details</h4> <p>Not applicable</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting</h4> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>C-17 Mechanical Aircraft Technician</p><br><br><br><p><b>Company:</b></p><br><br>Boeing Operations International Incorporated Kuwait<br><br><p>The Boeing Company is currently seeking a<b> C-17 Aircraft Mechanic</b> to support Boeing Global Services in <b>Al Mubarak Air Base Kuwait</b>.</p><br><br><br><p>This position is part of the on-site C-17 Globemaster III Integrated Sustainment Program maintenance team supporting the Kuwait Air Force (KAF) C-17 aircraft based at Al Mubarak Air Base Kuwait. Applicant will participate in organizational level maintenance activities (e.g. flight line tasks including aircraft servicing, inspections, fault diagnosis and component replacement, and structural repair) associated with day-to-day operations of C-17 Globemaster III aircraft to meet KAF mission requirements.</p><br><br><br><p>Additionally, participation in Intermediate level maintenance activities (e.g. back-shop tasks including component repair, test set operation, battery charging, and scheduled periodic inspections) will be required.</p><br><br><br><p><b>Position Responsibilities:</b></p><br><br><ul><li><p>English is the primary language of the KAF community on the airbase in Kuwait. All technical data to perform the tasks and training are in English.</p><br><br></li><li><p>Competency in reading, comprehension and speaking the English language is necessary.</p><br><br></li><li><p>Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.</p><br><br></li><li><p>Oversees assembly, disassembly or overhaul.</p><br><br></li><li><p>Configures aerospace vehicles and bench test equipment.</p><br><br></li><li><p>Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.</p><br><br></li><li><p>Performs validation/verification testing of systems and components.</p><br><br></li><li><p>Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).</p><br><br></li><li><p>Inspects components and verifies repairs for flight worthiness requirements.</p><br><br></li><li><p>Oversees training.</p><br><br></li><li><p>Works under general direction.</p><br><br></li></ul><br><p><b>This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. secret clearance Post Start is required.</b></p><br><br><br><p><b>Basic Qualifications (Required Skills/Experience):</b></p><br><br><ul><li><p>5+ years of C17 Maintenance experience</p><br><br></li><li><p>Current (or ability to obtain) US Security Clearance</p><br><br></li></ul><br><p><b>Preferred Qualifications (Desired Skills/Experience):</b></p><br><br><ul><li><p>Experience in structural, composite repair, and/or fuel cell maintenance</p><br><br></li></ul><br><p><span>This position offers relocation based on candidate eligibility.</span></p><br><br><br><p>Employer <span>is</span> willing to sponsor applicants for employment visa status</p><br><br><br><p>This requisition is for an international, locally hired position in Kuwait. Benefits and pay are determined at the local level and are not part of Boeing U.S. based payroll and will be commensurate with experience and qualifications and in accordance with applicable Kuwaiti law. Employment is subject to the candidate's ability to satisfy all Kuwaiti labor and immigration formalities.</p><br><br><br><br><p><b><b><b>Language Requirements:</b></b></b></p><br><br><br>Not Applicable<br><br><p><b>Education:</b></p><br><br>Not Applicable<br><br><p><b>Relocation:</b></p><br><br>This position offers relocation based on candidate eligibility.<br><br><p><b>Security Clearance:</b></p><br><br>This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.<br><br><p><b>Visa Sponsorship:</b></p><br><br>Employer willing to sponsor applicants for employment visa status.<br><br><p><b>Contingent Upon Award Program</b></p><br><br>This position is not contingent upon program award<br><br><p><b>Shift:</b></p><br><br>Shift Worker (Kuwait)<br> </div>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The SharePoint Administrator/Developer will provide enterprise-level SharePoint administration, development, and customer support to military and civilian users. This role requires expertise in SharePoint infrastructure design, deployment, customization, and maintenance to ensure optimal system performance and user experience. The administrator will be responsible for gathering business requirements, designing tailored SharePoint solutions, and implementing best practices for collaboration, document management, automation, and security. This position demands strong skills in SharePoint Online, SharePoint 2019, Power Platform (Power Automate, Power Apps, Power BI), and Microsoft 365 integration to enhance operational efficiency. The candidate will work closely with stakeholders to analyze business needs, develop scalable solutions, and ensure compliance with enterprise security policies and military standards. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p><strong>Responsibilities</strong></p><ul><li>Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level.</li><li>Manage SharePoint Enterprise Search, including index configurations and scheduling.</li><li>Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours.</li><li>Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring.</li><li>Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI).</li><li>Develop and maintain high-level technical and engineering documentation.</li><li>Act as the SharePoint subject matter expert, providing training and end-user support.</li><li>Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM).</li><li>Customize SharePoint Online and SharePoint 2019 sites using modern design templates, JSON formatting, and adaptive cards.</li><li>Develop, automate, and manage workflows using Power Automate (Flow) and Microsoft Forms.</li><li>Ensure compliance with Zero Trust Security models, Microsoft Security &amp; Compliance Center policies, and Information Assurance (IA) standards.</li><li>Apply Security Technical Implementation Guidelines (STIGs) for governance and security.</li><li>Troubleshoot site-related issues, manage user permissions, and assist with site creation and configuration.</li><li>Automate SharePoint administration tasks using PowerShell and Microsoft Graph API.</li><li>Assist database administrators with configuring and monitoring SQL Server databases supporting SharePoint.</li><li>Performs other duties and assignments as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Requires an active Secret Clearance.</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience.</li><li>Associate Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field.</li><li>This position requires candidates to adhere to DoD 8570.01. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. The authorized certifications for this job title are listed as follows: BASELINE: Cisco: CCNA: Certified Network Associate - Security Cisco: CCNP: Certified Network Professional - Security CompTIA: CASP+ ce: Advanced Security Practitioner CompTIA: Security+ ce CompTIA: SecurityX ce GIAC: GCED: Certified Enterprise Defender GIAC: GCIH: Certified Incident Handler GIAC: GICSP: Industrial Cyber Security Professional GIAC: GSEC: Security Essentials ISC2: CISSP ( or Associate ): Certified Information Systems Security Professional COMPUTING ENVIRONMENT (CE): Microsoft: 365 Certified: Enterprise Administrator Expert Microsoft: Certified: Azure Database Administrator Associate Microsoft: Certified: Azure Security Engineer Associate Microsoft: Certified: Azure Solutions Architect Expert Microsoft: MCA: Certified Architect ( Any ) Microsoft: MCITP: Database Administrator 2008 Microsoft: MCITP: Database Developer 2008 Microsoft: MCITP: Enterprise Administrator Microsoft: MCITP: SharePoint Administrator 2010 ( Technical III for SharePoint Admin only ) Microsoft: MCSA: Certified Solutions Associate: SQL Server 2012 Microsoft: MCSA: SQL 2016 Database Admin Microsoft: MCSA: SQL 2016 Database BI Development Microsoft: MCSA: SQL 2016 Database Dev Microsoft: MCSA: Windows Server 2008/2012/2016 Microsoft: MCSD: Microsoft Certified Solutions Developer ( Any ) Microsoft: MCSE: Core Infrastructure Microsoft: MCSE: Data Management and Analytics Microsoft: MCSE: Productivity Solutions Expert</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience.</li><li>At least five years of hands-on experience with Windows Server administration and Active Directory management, with a strong understanding of security principles, access controls, and compliance best practices in an enterprise environment.</li><li>Expert proficiency in web design and development, including HTML5, CSS3, JavaScript, and modern SharePoint Framework (SPFx), React, and TypeScript.</li><li>Proven ability to develop, deploy, and manage SharePoint web parts, lists, libraries, and workflows while designing, maintaining, and administering SharePoint portals.</li><li>Strong documentation skills with the ability to create technical documentation, user guides, and training materials, along with the capability to interact with key stakeholders, gather business requirements, and translate them into effective SharePoint solutions.</li><li>Experience working with Infrastructure, Web Servers (IIS), SharePoint Administration, and Microsoft 365 integration, as well as knowledge of Power Platform (Power Automate, Power Apps, Power BI) for workflow automation and business process optimization.</li><li>Experience with a customer service-oriented company.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Details</strong></p><p>Job Title Sr. Andorid Developer Job Code KWDEV2-102 Job Country Kuwait Zone Al Asimah Duties &amp; Responsibilities</p><p>Job title: Dotnet Developer Job Type: Permanent Job, Full Time Place of work: Udaipur Working hours: 9 hours (including 1-hour break) Minimum level of Education: Must be Engineering Graduate/ Post Graduate preferred Reporting line: Development Manager / Team Leader / CEO</p><p><strong>Requirements:</strong></p><ol><li>Proven work experience in as a computer software engineer or software developer</li><li>Hands-on experience in designing interactive applications</li><li>Ability to develop software in C, C++, C#, Java or other selected languages</li><li>Excellent knowledge of Relational Databases, SQL and ORM technologies (JPA2, Hibernate)</li><li>Experience in developing web applications using at least one popular web framework (JSF, Wicket, GWT, and Spring MVC)</li><li>Experience with test-driven development</li><li>Mastery of software engineering tools</li><li>Ability to document requirements and specifications</li><li>Familiarity with software development methodology and release processes</li><li>Minimum Bachelor degree in Computer Science or Engineering</li></ol><p><strong>Qualities:</strong></p><ol><li>Determines operational feasibility by evaluating analysis, problem definition, requirements, solution development, and proposed solutions.</li><li>Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code.</li><li>Prepares and installs solutions by determining and designing system specifications, standards, and programming.</li><li>Improves operations by conducting systems analysis; recommending changes in policies and procedures.</li><li>Obtains and licenses software by obtaining required information from vendors; recommending purchases; testing and approving products.</li><li>Updates job knowledge by studying state-of-the-art development tools, programming techniques, and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.</li><li>Protects operations by keeping information confidential.</li><li>Provides information by collecting, analyzing, and summarizing development and service issues.</li><li>Accomplishes engineering and organization mission by completing related results as needed.</li><li>Develops software solutions by studying information needs; conferring with users; studying systems flow, data usage, and work processes; investigating problem areas; following the software development lifecycle</li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Proven work experience in as a computer software engineer or software developer</li><li>Hands-on experience in designing interactive applications</li><li>Ability to develop software in C, C++, C#, Java or other selected languages</li><li>Excellent knowledge of Relational Databases, SQL and ORM technologies (JPA2, Hibernate)</li><li>Experience in developing web applications using at least one popular web framework (JSF, Wicket, GWT, and Spring MVC)</li><li>Experience with test-driven development</li><li>Mastery of software engineering tools</li><li>Ability to document requirements and specifications</li><li>Familiarity with software development methodology and release processes</li><li>Minimum Bachelor degree in Computer Science or Engineering</li></ul><p><strong>Qualities:</strong></p><ol><li>Determines operational feasibility by evaluating analysis, problem definition, requirements, solution development, and proposed solutions.</li><li>Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code.</li><li>Prepares and installs solutions by determining and designing system specifications, standards, and programming.</li><li>Improves operations by conducting systems analysis; recommending changes in policies and procedures.</li><li>Obtains and licenses software by obtaining required information from vendors; recommending purchases; testing and approving products.</li><li>Updates job knowledge by studying state-of-the-art development tools, programming techniques, and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.</li><li>Protects operations by keeping information confidential.</li><li>Provides information by collecting, analyzing, and summarizing development and service issues.</li><li>Accomplishes engineering and organization mission by completing related results as needed.</li><li>Develops software solutions by studying information needs; conferring with users; studying systems flow, data usage, and work processes; investigating problem areas; following the software development lifecycle</li></ol><p></p></section>

<ul><li><p>Design and detailed engineering of API 650 and API 620 storage tanks.</p></li><li><p>Review tender documents, client specifications, and design basis.</p></li><li><p>Prepare design calculations for tank shells, roofs, bottoms, nozzles, wind girders, anchor bolts, and foundation loading.</p></li><li><p>Prepare RFQs, Material Requisitions, Technical Specifications, BOQs, and Tank Design Reports.</p></li><li><p>Design Cone Roof, Dome Roof, Internal Floating Roof (IFR), External Floating Roof (EFR), and Aluminium Geodesic Dome Roof tanks.</p></li><li><p>Prepare General Arrangement (GA) drawings, nozzle orientation drawings, plate arrangement drawings, and fabrication detailing.</p></li><li><p>Review vendor drawings, FEA reports, and perform technical bid evaluations.</p></li><li><p>Coordinate with Civil, Process, Piping, Structural, Electrical, and Instrumentation teams.</p></li><li><p>Support fabrication, erection, hydrotesting, commissioning, and troubleshooting.</p></li><li><p>Conduct site surveys and recommend repair or fitness-for-service solutions.</p></li><li><p>Prepare as-built documentation and resolve technical queries.</p></li></ul><p><strong>Codes & Standards</strong></p><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Storage tank engineering</p></li><li><p>Hydrocarbon storage terminals</p></li><li><p>Tank fabrication and erection</p></li><li><p>Welding, inspection, and testing</p></li><li><p>Material selection and corrosion engineering</p></li><li><p>Vendor document review</p></li><li><p>Technical bid evaluation</p></li><li><p>Mechanical design calculations</p></li><li><p>EPC project coordination</p></li><li><p>Strong communication and problem-solving skills</p></li></ol>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The SharePoint Administrator/Developer will provide enterprise-level SharePoint administration, development, and customer support to military and civilian users. This role requires expertise in SharePoint infrastructure design, deployment, customization, and maintenance to ensure optimal system performance and user experience. The administrator will be responsible for gathering business requirements, designing tailored SharePoint solutions, and implementing best practices for collaboration, document management, automation, and security. This position demands strong skills in SharePoint Online, SharePoint 2019, Power Platform (Power Automate, Power Apps, Power BI), and Microsoft 365 integration to enhance operational efficiency. The candidate will work closely with stakeholders to analyze business needs, develop scalable solutions, and ensure compliance with enterprise security policies and military standards. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. . Responsibilities + Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level. + Manage SharePoint Enterprise Search, including index configurations and scheduling. + Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours. + Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring. + Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI). + Develop and maintain high-level technical and engineering documentation. + Act as the SharePoint subject matter expert, providing training and end-user support. + Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM). + Customize SharePoint Online and SharePoint 2019 sites using modern design templates, JSON formatting, and adaptive cards. + Develop, automate, and manage workflows using Power Automate (Flow) and Microsoft Forms. + Ensure compliance with Zero Trust Security models, Microsoft Security &amp; Compliance Center policies, and Information Assurance (IA) standards. + Apply Security Technical Implementation Guidelines (STIGs) for governance and security. + Troubleshoot site-related issues, manage user permissions, and assist with site creation and configuration. + Automate SharePoint administration tasks using PowerShell and Microsoft Graph API. + Assist database administrators with configuring and monitoring SQL Server databases supporting SharePoint. + Performs other duties and assignments as required. Qualifications + Qualifications: + Security Clearance: + Requires an active Secret Clearance. + Education / Certifications: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + Associate Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. + This position requires candidates to adhere to DoD 8570.01. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. + The authorized certifications for this job title are listed as follows: + BASELINE: + Cisco: CCNA: Certified Network Associate - Security + Cisco: CCNP: Certified Network Professional - Security + CompTIA: CASP+ ce: Advanced Security Practitioner + CompTIA: Security+ ce + CompTIA: SecurityX ce + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler + GIAC: GICSP: Industrial Cyber Security Professional + GIAC: GSEC: Security Essentials + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + COMPUTING ENVIRONMENT (CE): + Microsoft: 365 Certified: Enterprise Administrator Expert + Microsoft: Certified: Azure Database Administrator Associate + Microsoft: Certified: Azure Security Engineer Associate + Microsoft: Certified: Azure Solutions Architect Expert + Microsoft: MCA: Certified Architect (Any) + Microsoft: MCITP: Database Administrator 2008 + Microsoft: MCITP: Database Developer 2008 + Microsoft: MCITP: Enterprise Administrator + Microsoft: MCITP: SharePoint Administrator 2010 (Technical III for SharePoint Admin only) + Microsoft: MCSA: Certified Solutions Associate: SQL Server 2012 + Microsoft: MCSA: SQL 2016 Database Admin + Microsoft: MCSA: SQL 2016 Database BI Development + Microsoft: MCSA: SQL 2016 Database Dev + Microsoft: MCSA: Windows Server 2008/2012/2016 + Microsoft: MCSD: Microsoft Certified Solutions Developer (Any) + Microsoft: MCSE: Core Infrastructure + Microsoft: MCSE: Data Management and Analytics + Microsoft: MCSE: Productivity Solutions Expert + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + At least five years of hands-on experience with Windows Server administration and Active Directory management, with a strong understanding of security principles, access controls, and compliance best practices in an enterprise environment. + Expert proficiency in web design and development, including HTML5, CSS3, JavaScript, and modern SharePoint Framework (SPFx), React, and TypeScript. + Proven ability to develop, deploy, and manage SharePoint web parts, lists, libraries, and workflows while designing, maintaining, and administering SharePoint portals. + Strong documentation skills with the ability to create technical documentation, user guides, and training materials, along with the capability to interact with key stakeholders, gather business requirements, and translate them into effective SharePoint solutions. + Experience working with Infrastructure, Web Servers (IIS), SharePoint Administration, and Microsoft 365 integration, as well as knowledge of Power Platform (Power Automate, Power Apps, Power BI) for workflow automation and business process optimization. + Experience with a customer service-oriented company. + Skills &amp; Technology Used: + Ability to Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level. + Manage SharePoint Enterprise Search, including index configurations and scheduling. + Ability to Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours. + Ability to Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring. + Ability to Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI). + Develop and maintain high-level technical and engineering documentation. + Act as the SharePoint subject matter expert, providing training and end-user support. + Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM).Demonstrate expertise in modern web development technologies, including: + SPFx (SharePoint Framework) + React + TypeScript + PnP (Patterns and Practices) + Client-Side Object Model (CSOM) At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

Marble Works Supervisor & Technical Designer<br><br> Engineer , Sales Engineer <br><br>Civil Engineering<br><br> Job Id :100194776<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Position: Marble Works Supervisor & Technical Designer<br><br>Location: Kuwait<br><br>Company: Studio Marmi<br><br>About The Role<br><br>Studio Marmi is looking for an experienced and motivated Marble Works Supervisor & Technical Designer to join our team. The ideal candidate must have strong practical experience in marble and natural stone projects, from material selection and fabrication to installation and project completion.<br><br>The candidate should be capable of combining technical design expertise with hands-on site supervision to ensure that all projects are completed according to company standards, specifications, and deadlines.<br><br>Key Responsibilities<br><br>Minimum 3 Years Of Experience Preferred.<br><br>Supervise all stages of marble works, including cutting, shaping, fabrication, and installation.<br><br>Prepare accurate and detailed Shop Drawings using Auto CAD.<br><br>Create 3D models and technical designs using Sketch Up.<br><br>Read and interpret architectural and structural drawings.<br><br>Perform quantity surveying and prepare material takeoffs.<br><br>Prepare cost estimates and price quotations based on project specifications.<br><br>Coordinate with suppliers, contractors, and installation teams.<br><br>Monitor project progress and ensure work is completed according to quality standards.<br><br>Minimize material waste and improve cost efficiency.<br><br>Provide practical solutions for site-related challenges.<br><br>Ensure projects are completed on time and within budget.<br><br>Required Qualifications<br><br>Bachelor's<br><br>Previous experience in the marble and natural stone industry is mandatory.<br><br>Strong experience in marble fabrication and installation supervision.<br><br>Proficiency in Auto CAD.<br><br>Proficiency in Sketch Up.<br><br>Strong knowledge of quantity surveying and cost estimation.<br><br>Ability to prepare Shop Drawings.<br><br>Excellent understanding of architectural and structural drawings.<br><br>Strong organizational and communication skills.<br><br>Ability to manage multiple projects simultaneously.<br><br>Preferred Skills<br><br>Leadership and team management skills.<br><br>Strong problem-solving abilities.<br><br>Attention to detail.<br><br>Ability to work under pressure and meet deadlines.<br><br>If you have the required experience and technical expertise in marble works, we would like to hear from you.<br><br>Please send your Cv's on- hr@studiomarmi.com.kw<br><br>Application Question(s)<br><br>Current Salary<br><br>Expected Salary<br><br>Age<br><br>Visa Status<br><br>Work Location: In person<br><br>Building Materials & Supplies<br><br>Basic Details<br><br>salary : 800-850 KWD<br><br>Experience : 2-3 Years<br><br>Location : Shuwaikh , Kuwait<br><br>Qualification : Bachelor<br><br>Posted : 9 days ago<br><br>Job Type : Full-Time<br><br>Company : Studio Marmi<br><br>Posted By: HR Studiomarmi<br><br>Contact Info<br><br>Mobile : +965 55386500<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : hr@studiomarmi.com.kw

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The SharePoint Administrator/Developer will provide enterprise-level SharePoint administration, development, and customer support to military and civilian users. This role requires expertise in SharePoint infrastructure design, deployment, customization, and maintenance to ensure optimal system performance and user experience. The administrator will be responsible for gathering business requirements, designing tailored SharePoint solutions, and implementing best practices for collaboration, document management, automation, and security. This position demands strong skills in SharePoint Online, SharePoint 2019, Power Platform (Power Automate, Power Apps, Power BI), and Microsoft 365 integration to enhance operational efficiency. The candidate will work closely with stakeholders to analyze business needs, develop scalable solutions, and ensure compliance with enterprise security policies and military standards. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. . Responsibilities + Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level. + Manage SharePoint Enterprise Search, including index configurations and scheduling. + Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours. + Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring. + Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI). + Develop and maintain high-level technical and engineering documentation. + Act as the SharePoint subject matter expert, providing training and end-user support. + Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM). + Customize SharePoint Online and SharePoint 2019 sites using modern design templates, JSON formatting, and adaptive cards. + Develop, automate, and manage workflows using Power Automate (Flow) and Microsoft Forms. + Ensure compliance with Zero Trust Security models, Microsoft Security &amp; Compliance Center policies, and Information Assurance (IA) standards. + Apply Security Technical Implementation Guidelines (STIGs) for governance and security. + Troubleshoot site-related issues, manage user permissions, and assist with site creation and configuration. + Automate SharePoint administration tasks using PowerShell and Microsoft Graph API. + Assist database administrators with configuring and monitoring SQL Server databases supporting SharePoint. + Performs other duties and assignments as required. Qualifications + Qualifications: + Security Clearance: + Requires an active Secret Clearance. + Education / Certifications: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + Associate Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. + This position requires candidates to adhere to DoD 8570.01. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. + The authorized certifications for this job title are listed as follows: + BASELINE: + Cisco: CCNA: Certified Network Associate - Security + Cisco: CCNP: Certified Network Professional - Security + CompTIA: CASP+ ce: Advanced Security Practitioner + CompTIA: Security+ ce + CompTIA: SecurityX ce + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler + GIAC: GICSP: Industrial Cyber Security Professional + GIAC: GSEC: Security Essentials + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + COMPUTING ENVIRONMENT (CE): + Microsoft: 365 Certified: Enterprise Administrator Expert + Microsoft: Certified: Azure Database Administrator Associate + Microsoft: Certified: Azure Security Engineer Associate + Microsoft: Certified: Azure Solutions Architect Expert + Microsoft: MCA: Certified Architect (Any) + Microsoft: MCITP: Database Administrator 2008 + Microsoft: MCITP: Database Developer 2008 + Microsoft: MCITP: Enterprise Administrator + Microsoft: MCITP: SharePoint Administrator 2010 (Technical III for SharePoint Admin only) + Microsoft: MCSA: Certified Solutions Associate: SQL Server 2012 + Microsoft: MCSA: SQL 2016 Database Admin + Microsoft: MCSA: SQL 2016 Database BI Development + Microsoft: MCSA: SQL 2016 Database Dev + Microsoft: MCSA: Windows Server 2008/2012/2016 + Microsoft: MCSD: Microsoft Certified Solutions Developer (Any) + Microsoft: MCSE: Core Infrastructure + Microsoft: MCSE: Data Management and Analytics + Microsoft: MCSE: Productivity Solutions Expert + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + At least five years of hands-on experience with Windows Server administration and Active Directory management, with a strong understanding of security principles, access controls, and compliance best practices in an enterprise environment. + Expert proficiency in web design and development, including HTML5, CSS3, JavaScript, and modern SharePoint Framework (SPFx), React, and TypeScript. + Proven ability to develop, deploy, and manage SharePoint web parts, lists, libraries, and workflows while designing, maintaining, and administering SharePoint portals. + Strong documentation skills with the ability to create technical documentation, user guides, and training materials, along with the capability to interact with key stakeholders, gather business requirements, and translate them into effective SharePoint solutions. + Experience working with Infrastructure, Web Servers (IIS), SharePoint Administration, and Microsoft 365 integration, as well as knowledge of Power Platform (Power Automate, Power Apps, Power BI) for workflow automation and business process optimization. + Experience with a customer service-oriented company. + Skills &amp; Technology Used: + Ability to Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level. + Manage SharePoint Enterprise Search, including index configurations and scheduling. + Ability to Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours. + Ability to Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring. + Ability to Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI). + Develop and maintain high-level technical and engineering documentation. + Act as the SharePoint subject matter expert, providing training and end-user support. + Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM).Demonstrate expertise in modern web development technologies, including: + SPFx (SharePoint Framework) + React + TypeScript + PnP (Patterns and Practices) + Client-Side Object Model (CSOM) At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Plan, conduct, and supervise aircraft technical inspections. Compute basic weight and balance records. Participate in maintenance test flights and operation checks as required. Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration. Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies. Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li><li>Completion of high school or equivalent required. Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li></ul><h2>Knowledge &amp; Skills</h2><ul><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li></ul><h2>Physical Requirements/Working Environment</h2><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty.</p><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components.</p><p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p><p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals.</p><p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p><p>Plan, conduct, and supervise aircraft technical inspections.</p><p>Compute basic weight and balance records.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration.</p><p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies.</p><p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities.</p><p>Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li><li>Completion of high school or equivalent required.</li><li>Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li></ul><h3>Knowledge &amp; Skills</h3><ul><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li></ul><h3>Physical Requirements/Working Environment</h3><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<p><h4>Principal accountabilities</h4> <p>Typical duties include the following, although specific duties vary by assignment or contract.</p> <ul> <li>Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule.</li> <li>Ensures construction adheres to construction specifications.</li> <li>Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc.). Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required.</li> <li>Logs, references, distributes, and files all related correspondence, drawings, and documents.</li> <li>Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned).</li> <li>Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and standard operating procedures for security, safety, environmental controls, hazardous materials and underground utilities.</li> <li>Visits construction sites and submits required construction reports to monitor progress against schedule and timelines.</li> <li>Cooperates with visiting government and department of defense personnel conducting official inspection visits and surveys and participates in their briefing or orientation.</li> <li>Provides leadership, mentoring, and professional development to assigned staff.</li> <li>Manages the work of teams to procure and construct work.</li> <li>Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion.</li> <li>Attends meetings as required including design and construction reviews and construction kickoff meetings.</li> <li>Performs other qualified duties as assigned.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of cost controls, contractual and project management of international construction projects.</li> <li>Shall also be versed in the International Building Code, NFPA fire codes and the NEC in addition to general construction practices.</li> <li>Knowledge of construction materials, processes, techniques, and methods.</li> <li>Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations.</li> <li>Knowledge of Service Contract Act and Truth in Negotiations Act.</li> <li>Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract.</li> <li>Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA).</li> <li>Knowledge of accounting practices including disclosed accounting practices.</li> <li>Effective leadership and interpersonal skills.</li> <li>Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps, forward operating bases, and major civil projects.</li> <li>Excellent communication and organizational skills are essential.</li> <li>Able to use project and construction management planning and reporting tools such as Microsoft Project and Primavera.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or equivalent.</li> <li>Bachelor’s degree in engineering, construction technology, or construction management (preferred).</li> <li>Must be able to obtain and maintain a secret clearance; note US citizenship is required to obtain a secret clearance.</li> <li>Minimum seven years of construction field experience in all phases of civil and building construction or a two-year associate degree in construction management or related field and five years of field experience.</li> <li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li> <li>Experience in civil and structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li> <li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA fire codes, British Standard (BS) electrical code, and the National Electric Code (NEC) in addition to general construction practices.</li> <li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time and cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li> <li>An Engineer in Training (EIT) or professional certification/project management certification is desired.</li> <li>Additional knowledge and skills may be required by contract or assignment.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Works in a normal office environment with controlled temperature and lighting conditions.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - The company enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his or her quality management and customer satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to the job.</p></p><p></p>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-I (UH-60) troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.<br> Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent required.</li> <li>A valid up-to-date FAA A&P certificate is preferred.</li> <li>If no FAA A&P certificate, candidate must have three (3) years aviation maintenance experience, with a minimum of two (2) years on the assigned UH-60 mission design series (MDS).</li> <li>All experience must be within the six (6) most recent years.</li> <li>Must be in possession of a U.S. passport with a minimum of two plus years validity and be able to travel internationally.</li> <li>Must be able to obtain and maintain facility public trust NAC-I. Note: US citizenship is required for facility public trust NAC-I at this work location.</li> <li>Must be able to pass the CENTCOM medical requirement to deploy.</li> <li>Must be able to obtain Kuwait visa.</li> </ul> <h4>Knowledge and skills</h4> <ul> <li>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li> <li>Basic knowledge of aircraft sheet metal and structural modifications and repair.</li> <li>General knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements and working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<p> <b>The UH-60 Aircraft Mechanic AM-I (UH-60)</b> troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <ul> <li> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> </li> <li> <p>Service and lubricate aircraft and subsystems.</p> </li> <li> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> </li> <li> <p>Perform scheduled inspections and assist in performing special inspections.</p> </li> <li> <p>Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p> </li> <li> <p>Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.</p> </li> <li> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p> </li> <li> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> </li> <li> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p> </li> <li> <p>Participate in maintenance test flights and operation checks as required.</p> </li> <li> <p>Perform other duties as requested.</p> </li> </ul> <p> </p> <p> <b>Minimum Requirements:</b> </p> <ul> <li> <p>High School Diploma or equivalent required.</p> </li> <li> <p>A valid up-to-date FAA A&amp;P certificate is preferred.</p> </li> <li> <p>If No FAA A&amp;P certificate; candidate Must have Three (3) years aviation maintenance experience, with a minimum of two (2) years on the assigned <b>UH-60 </b>Mission Design Series (MDS). </p> </li> <li> <p>All experience must be within the Six (6) most recent years. </p> </li> <li> <p>Must be in possession of a U.S. Passport with a min. 2 plus years validity and be able to travel internationally.</p> </li> <li> <p>Must be able to obtain and maintain facility Public Trust NAC-I. Note: <b>US Citizenship is required </b>for facility Public Trust NAC-I at this work location.</p> </li> <li> <p>Must be able to pass the CENTCOM Medical requirement to deploy.</p> </li> <li> <p>Must be able to obtain Kuwait Visa</p> </li> </ul> <p> </p> <p> <b>Knowledge &amp; Skills</b> </p> <ul> <li> <p>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p> </li> <li> <p>Basic knowledge of aircraft sheet metal/structural modifications and repair.</p> </li> <li> <p>General knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p> </li> <li> <p>Working knowledge of technical publications and Logistics Information Systems.</p> </li> <li> <p>Able to prioritize workloads to maintain schedules on assigned projects.</p> </li> <li> <p>Participate in maintenance test flights and operation checks as required.</p> </li> <li> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p> </li> <li> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, and may be required to make entries in aircraft logs and records.</p> </li> </ul> <p> </p> <p> <b>Physical Requirements/Working Environment</b> </p> <ul> <li> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> </li> <li> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> </li> <li> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p> </li> <li> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> </li> <li> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> </li> <li> <p>Will handle dirty parts and lubricants.</p> </li> <li> <p>Will be required to wear proper Personal Protective Equipment (PPE).</p> </li> <li> <p>Must be able to pass a Respirator Physical and Fit Test qualification.</p> </li> <li> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> </li> <li> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> </li> <li> <p>May work in maintenance shop or outside.</p> </li> <li> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> </li> <li> <p>May be exposed to extreme noise from operating equipment.</p> </li> <li> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p> </li> <li> <p>Occasionally lifts objects up to 50 pounds.</p> </li> <li> <p>Most heavy lifting is accomplished through the use of mechanical devices.</p> </li> <li> <p>May be expected to work in austere environments and all-weather conditions.</p> </li> </ul>

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Plan, conduct, and supervise aircraft technical inspections. Compute basic weight and balance records. Participate in maintenance test flights and operation checks as required. Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration. Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies. Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities. Perform other duties as requested.</p><p>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment. Completion of high school or equivalent required. Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS). Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components. Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally. Able to clear CENTCOM Medical for deployment.</p><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Completion of high school or equivalent required.</li><li>Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li></ul>

<p><h4>Job Description</h4> <p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneuhydraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>With a valid (FAA) A&P certificate (preferred), two (2) years of aviation maintenance experience, two (2) years rotary wing aircraft experience, and two (2) years on the assigned MDS UH-60 aircraft is required. (See below for requirements without A&P).</p> <p>Valid US passport and US citizenship is required to obtain the NAC-I clearance and for facility access.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> <p>Perform scheduled inspections and assist in performing special inspections.</p> <p>Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.</p> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>With a valid (FAA) A&P certificate, two (2) years of aviation maintenance experience, two (2) years rotary wing aircraft experience, and two (2) years on the assigned MDS UH-60 aircraft is required.</li> <li>All experience must be within the five (5) most recent years.</li> <li>Without a valid (FAA) A&P certificate; must have three (3) years aviation maintenance experience, three (3) years of rotary wing aircraft experience, and a minimum of three (3) years on the assigned UH-60 Mission Design Series (MDS) is required.</li> <li>All experience must be within the six (6) most recent years.</li> <li>U.S. military technical school or specialized training course is desired; certification of education level is required.</li> <li>A valid US passport is required for deployment to Kuwait. The passport must have 3 years remaining before expiring and 6 blank pages available at the time of hire and deployment.</li> <li>Must be able to pass and clear CENTCOM Army MOD physical and requirements for deployment (will attend CRC/DIDC training).</li> <li>Must be able to obtain Kuwait PCC clearance and visa prior to deployment.</li> </ul> <h4>Security Clearance Requirements</h4> <p>Must be able to obtain and maintain a US government NAC-I (T1) public trust security clearance. Must be able to obtain and maintain facility credentials/authorization. US citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and Preferred Qualifications</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical Requirements / Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</li><li>Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</li><li>Minimum Requirements : High School Diploma or Equivalent is required.</li><li>With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. All experience must be within the Five (5) most recent years.</li><li>Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required. All experience must be within the Six (6) most recent years.</li><li>U.S. Military Technical school or specialized training course is desired, certification of education level is required.</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Security Clearance Requirements: Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li><li>Must be able to obtain and maintain facility credentials/authorization.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Additional and Preferred Qualifications : Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li><li>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li><li>May be expected to work in austere environments and all-weather conditions</li></ul>

<p><h4>Job description</h4> <p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>With a valid (FAA) A&P certificate (preferred), two (2) years of aviation maintenance experience, two (2) years rotary wing aircraft experience, and two (2) years on the assigned MDS UH-60 aircraft is required. (See below for requirements without A&P).</p> <p>Valid US passport and US citizenship is required to obtain the NAC-I clearance and for facility access.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> <p>Perform scheduled inspections and assist in performing special inspections.</p> <p>Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.</p> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Perform other duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>With a valid (FAA) A&P certificate, two (2) years of aviation maintenance experience, two (2) years rotary wing aircraft experience, and two (2) years on the assigned MDS UH-60 aircraft is required. All experience must be within the five (5) most recent years.</li> <li>Without a valid (FAA) A&P certificate; must have three (3) years aviation maintenance experience, three (3) years of rotary wing aircraft experience, and a minimum of three (3) years on the assigned UH-60 Mission Design Series (MDS) is required. All experience must be within the six (6) most recent years.</li> <li>U.S. military technical school or specialized training course is desired; certification of education level is required.</li> <li>A valid US passport is required for deployment to Kuwait. The passport must have 3 years remaining before expiring and 6 blank pages available at the time of hire and deployment.</li> <li>Must be able to pass and clear CENTCOM Army MOD physical and requirements for deployment (will attend CRC/DIDC training).</li> <li>Must be able to obtain Kuwait PCC clearance and visa prior to deployment.</li> </ul> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US government NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p><p>Job title: Dotnet Developer&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Job Type: Permanent Job, Full Time&nbsp;</p><p><br></p><p>Place of work: Kuwait</p><p><br></p><p>Working hours: 9 hours (including 1-hour break)</p><p><br></p><p>Minimum level of Education: Must be Engineering Graduate/ Post Graduate preferred</p><p><br></p><p>Reporting line:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Development Manager / Team Leader / CEO</p><p><br></p><p>Description of the Company: Pegasus is the Leading Provider of technology solutions. From enterprise infrastructure to retail store-level technology, Pegasus has an extensive team of dedicated professional.</p><p><br></p><p>Values of the Company: Pegasus has a strong presence in the retail industry. We offer a full range of professional service to retailers. From business consulting to store networking, their services team has the training and experience needed to make technology successful.</p><p><br></p><p>Requirements:</p><p><br></p><p>1.<span > </span>Proven work experience in as a computer software engineer or software developer</p><p><br></p><p>2.<span > </span>Hands-on experience in designing interactive applications</p><p><br></p><p>3.<span > </span>Ability to develop software in C, C++, C#, Java or other selected languages</p><p><br></p><p>4.<span > </span>Excellent knowledge of Relational Databases, SQL and ORM technologies (JPA2, Hibernate)</p><p><br></p><p>5.<span > </span>Experience in developing web / desktop applications using at least one popular web framework (JSF, Wicket, GWT, and Spring MVC)</p><p><br></p><p>6.<span > </span>Experience with test-driven development</p><p><br></p><p>7.<span > </span>Mastery of software engineering tools</p><p><br></p><p>8.<span > </span>Ability to document requirements and specifications</p><p><br></p><p>9.<span > </span>Familiarity with software development methodology and release processes</p><p><br></p><p>10.<span > </span>Minimum Bachelor degree in Computer Science or Engineering</p><p><br></p><p>12.&nbsp; &nbsp; Must have experience of ERP , POS, rfid, barcarole technology.</p><p><br></p><p>13.&nbsp; &nbsp;Independent development experience, able to do r&amp;d, troubleshooting with DOT net (c#,VB.net,asp.net)</p><p><br></p><p><br></p><p><br></p><p>Qualities:</p><p><br></p><p>1.<span > </span>Determines operational feasibility by evaluating analysis, problem definition, requirements, solution development, and proposed solutions.</p><p><br></p><p>2.<span > </span>Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code.</p><p><br></p><p>3.<span > </span>Prepares and installs solutions by determining and designing system specifications, standards, and programming.</p><p><br></p><p>4.<span > </span>Improves operations by conducting systems analysis; recommending changes in policies and procedures.</p><p><br></p><p>5.<span > </span>Obtains and licenses software by obtaining required information from vendors; recommending purchases; testing and approving products.</p><p><br></p><p>6.<span > </span>Updates job knowledge by studying state-of-the-art development tools, programming techniques, and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.</p><p><br></p><p>7.<span > </span>Protects operations by keeping information confidential.</p><p><br></p><p>8.<span > </span>Provides information by collecting, analyzing, and summarizing development and service issues.</p><p><br></p><p>9.<span > </span>Accomplishes engineering and organization mission by completing related results as needed.</p><p><br></p><p>10.<span > </span>Develops software solutions by studying information needs; conferring with users; studying systems flow, data usage, and work processes; investigating problem areas; following the software development lifecycle</p><p><br></p><p>11.&nbsp; Able to complete job as agreed timeline.</p><p><br></p><p><br></p><p><br></p><p>Industry: IT-Software / Software Services</p><p>Functional Area: IT Software - Application Programming, Maintenance</p><p>Role Category: Programming &amp; Design</p><p>Role: Software Developer</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><br></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: · Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. · Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. · Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. · Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. · Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. · Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. · Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. · Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. · Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm. What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: Healthcare coverage Life insurance, AD&amp;D, and disability benefits Retirement plan Wellness programs Paid time off, including holidays and leave of absences Eligible Tuition Reimbursement Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><h4>Job description</h4> <p>The Army Aviation GSE - Ground Support Equipment Mechanic diagnoses malfunctions and repairs ground support equipment.</p> <p>Three (3) years of aviation GSE experience in the last six (6) years. Actual and recent aviation-related experience in the repair, modification, maintenance, and overhaul of related equipment being serviced and their associated components (APUs, etc).</p> <p>Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.</p> <p>Uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, and document maintenance actions, and analyzes, diagnoses, and repairs GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools.</p> <p>Maintains external fuel and grounding systems.</p> <p>Performs scheduled and unscheduled maintenance on GSE - inspects, tests, and operates GSE to determine equipment serviceability and proper operation.</p> <p>Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air.</p> <p>Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</p> <p>Disassembles and assembles malfunctioning GSE accessories and components.</p> <p>Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories, stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</p> <p>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</p> <p>Maintains vehicle records.</p> <p>Maintains and updates paper and electronic equipment records.</p> <p>Provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations.</p> <p>Practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</p> <p>Performs other qualified duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent.</li> <li>U.S. military technical school or specialized training course is desired.</li> <li>Three (3) years of aviation GSE experience in the last six (6) years. Actual and recent aviation-related experience in the repair, modification, maintenance, and overhaul of related equipment being serviced and their associated components (APUs, etc).</li> <li>Valid U.S. passport required, and able to travel internationally with minimum 6 blank pages and two (2) plus years' validity on passport expiration date at the time of hiring.</li> <li>Must be able to obtain and maintain facility Public Trust NAC-I. Note: U.S. citizenship is required for facility Public Trust NAC-I at this work location.</li> <li>Able to pass CENTCOM medical requirements for deployment (attend CRC).</li> <li>Must be able to obtain a Kuwait visa.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of inspection, servicing, troubleshooting, and repair of ground support equipment.</li> <li>Knowledge of military publications (including electronic manuals), drawings, blueprints, microfilm, diagrams, and schematics is mandatory.</li> <li>Knowledge of military and/or company forms required by work assignments.</li> <li>Individual must be able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul> <h4>Compensation details</h4> <p>Not applicable.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance.</li> <li>Paid time off and holidays.</li> <li>Retirement benefits (including 401(k) matching).</li> <li>Educational reimbursement.</li> <li>Parental leave.</li> <li>Employee stock purchase plan.</li> <li>Tax-saving options.</li> <li>Disability and life insurance.</li> <li>Pet insurance.</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 06/10/2026 - Until filled.</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>