Forklift Drivers Jobs in Kuwait

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Plan, conduct, and supervise aircraft technical inspections. Compute basic weight and balance records. Participate in maintenance test flights and operation checks as required. Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration. Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies. Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities. Perform other duties as requested.</p><p>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment. Completion of high school or equivalent required. Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS). Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components. Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally. Able to clear CENTCOM Medical for deployment.</p><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Completion of high school or equivalent required.</li><li>Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li></ul>

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials. Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required. U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>Establish radiation areas for radiographic operations.</p><p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>Perform nondestructive inspection on structures, components, and systems.</p><p>Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>Operate, maintain, and inspect nondestructive equipment.</p><p>Perform operator maintenance and service inspections on shop equipment and tools.</p><p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>Perform silver recovery functions.</p><p>Handle and dispose of hazardous waste and materials.</p><p>Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Supply Technician II assists with documents pertaining to work orders completed within the MST (Maintenance Support Team) and is responsible for the OMDAC-SWACA calibration program. Provides weekly/monthly maintenance work order reports within the section and performs technical supply management tasks (e.g., inventory management, storage management, maintenance tagging of equipment). Has knowledge of supply operations and program requirements and the ability to apply established supply policies, day-to-day servicing techniques, regulations, and procedures. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Manage decentralized and decontrolled inventory, including supplies, and equipment. Items managed typically are of low unit or annual demand value, involve short procurement lead time, are obtained from standard or other readily available sources of supply, and reflect relatively stable patterns of demand. + Reconcile documentation on issues, receipts, storage of supplies and equipment. + Assist the Communication Sites and Signal O&amp;M elements in obtaining items from + alternate sources of supply for difficult to obtain repair parts, components, and assemblies for the Project. + Provide in-storage maintenance for equipment in stock record accounts + Operate PP&amp;C center at the TLSF, Camp Arifjan, Kuwait + Track workflow, production control, and reconcile work orders and provide customers with management reports needed to support their readiness status. + Establish and maintain current consolidated listings of all Shop Stock and Bench Stock items for all maintenance shops both fixed and mobile. + Maintain up-to-date maintenance and supply status on all work requests by shop location. Monitor status and quantity of work in each shop in order to foresee and prevent bottlenecks and recommend corrective actions as necessary. + Screens maintenance request and inspection reports for accuracy. + Request equipment density lists from supported customers or sites to assist in projecting workloads and in developing bench and shop stock requirements. + Provide monthly supply and maintenance readiness reports to the Maintenance Supervisor and to the Government’s identified POC’s. + May be required to provide assistance to and/or be assigned to the SRA (Supply Retail Activity) to meet operational requirements. + Perform other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Ability to obtain a National Agency Check with Inquires (NACI) to obtain a Common Access Card (CAC). + Ability to obtain and maintain a Secret level security clearance is preferred. + Education / Certifications: One-year related experience may be substituted for one year of education, if degree is required. + High School diploma or GED required. Some college preferred. + IASSC: Lean Six Sigma: Green Belt preferred + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + A minimum of five years experience in Supply operations. + Experience with automated supply management systems. + Must be able to obtain a forklift license. + Experience with a customer service-oriented company. + SUPERVISORY / BUDGETARY RESPONSIBILITIES + At least two years of supervisory or lead experience is preferred. + Update proprietary applications regarding: + Update section employee daily status, leave, sick, on site, etc. + Verify and track accomplishment of section monthly or quarterly safety and compliance training + Purge section employee expired certifications + Verify section employee compliance training in Virtual Training Record + Verify section vehicle logs are being kept accurately and uploaded + Ensure section personnel are maintaining their 8570 / 8140 certifications + Review weekly training compliance reports for accomplishment prior to suspense. + Review and approve leave forms ensuring before approval all compliance training is current. + Coordinate transportation and integration of new and returning employees. + Document and promptly counsel poor performance and policy violations. + Enforce all V2X, GO 1, and dress code policies. + Provide annual employee appraisal feedback in a professional and constructive manner. + Demonstrate V2X values Integrity, Respect, Responsibility, and Professionalism. + Ensure the safety of personnel and monthly safety inspections are properly conducted. + Communicate effectively up and down the chain of command. + Manage work schedules. + Conduct proper new and returning employee orientation and ensure employee thorough understanding and can accomplish all tasks in the Employee Job Certification (EJC) + Work with employees and HR when emergencies or abnormal circumstances occur. + To the best of your ability render all decisions based upon our company values and principles of Integrity, Respect, Responsibility, and Professionalism. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Supply Chain Associate is responsible for material inventory management at the site level. Responsible for the overall management of the KC-130J supply warehouse, material requirements, and all logistics functions necessary for support of the assigned program. Assists the Supply Lead in the accomplishment of tasks assigned to the Supply Resource Center and serves as the point of contact on all logistics/supply/material related issues. Complies with all references pertaining to KAF logistics procedures, to include the KAF 4790 series manuals as they apply to this contract.</p><p>Assists the Supply Lead in the management of daily operations and execution of all tasks in support of the Supply Resource Center. Works as a member of the supply team, executing tasks and facilitating priorities as prescribed by the Supply Lead and Maintenance Control. Ensures timely and accurate completion of all supply related reports, contract deliverables, and relevant documents. Enforces and exercises continuous awareness of the supply effort in compliance with the KAF 4790, V2X, and local policies and instructions. Establish and maintain written procedures for the proper control of Government Furnished Property. Ensures accountability, shipment, and receipt of detachment pack ups and retrogrades. Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Maintains liaison with adjacent contractors and agencies in the performance of duties to include the procurement of high priority components/consumables, coordinating, facilitating, and tracking all shipping requirements. Manages all aspects of the Repair of Repairable (ROR) process, to include the preparation, coordination, tracking, and accurate documentation of all ROR transactions. Submits changes to established procedures/business rules ensuring all functions are consistent with written procedures. Establish and maintain stocking levels of aircraft components and consumables to ensure materials are available to meet maintenance requirements and maintain established contractual Mission Capability (MC) rates. Uses established supply routes to pick up and drop off parts in the support of maintenance and the flight schedule. Conducts and documents monthly inventories, maintains and updates supply records and documentation, maintains inventory at lowest possible cost to the customer. Makes recommendations concerning the functions of the Supply process at all supply/logistics meetings. Complies with DOT Hazardous Material Transportation Procedures. Utilizes logistical/supply related automated information systems to research, order, track, open, and close out supply requisitions. Processes, receives and restocks parts, maintaining all shipping documentation and certificates of conformance upon receipt of all parts as shipments arrive. Requisitions replenishments to maintain adequate stock levels to ensure parts are available to maintain mission capable (MC) aircraft and ready for issue (RFI) support equipment. Extensive working knowledge of Government Property Control/Procurement procedures in accordance with KAF 4790 Works directly with the customer, interfacing with both U.S. and Kuwaiti government, in the conduct of daily business and on issues involving procedural deficiencies. Complies with all company and government safety regulations to ensure a safe working environment. Responsible for updating and maintaining the KAF s supply information system: Kuwait Automated Supply Program (KASP) and maintenance information system: GOLD. Maintains accurate records of government property throughout the acquisition and disposition process. Responsible for adhering to all applicable maintenance programs (FOD, HAZMAT, ESD, etc..) required in the performance of duties. Checkout and operate all necessary support equipment to conduct warehouse operations. When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p><p>Kuwait Automated Supply Program (KASP), and maintenance information systems - GOLD.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School Diploma</li><li>Must be able to obtain/maintain the following required certifications/qualifications:<ul><li>Fork Lift License</li><li>Applicable Support Equipment licensing</li><li>Hazardous Shipping/Communication Training/Certification</li></ul></li><li>Five years experience specializing in aviation supply/logistics operations, aviation supply warehouse management, shipping, ordering, receiving, supply/material control processes/procedures preferred.</li><li>Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.</li><li>Must have a working knowledge of first aid procedures to be used in an emergency.</li><li>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, FOD, HAZMAT, etc ) as they relate to the functionality of supply/logistics duties.</li><li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li><li>Must have a valid U.S. Driver s License.</li><li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be willing and able to comply with all contractual Performance Work Statement (PWS) Requirements.</li><li>FOD, Tool Control, HAZMAT awareness trained as required by local policies.</li><li>Shall have experience in, and be capable of managing supply functions such as storage, issue, inspection, research, repairable component processing, shipping, receiving, warehousing, cataloguing, aircraft maintenance support, preparing MILSTRIP requisitions, and accounting for aircraft parts and equipment.</li><li>Must be familiar with and have the ability to fully manage, track, and facilitate the ROR process.</li><li>Must be proficient in the use of Microsoft Office Programs, including Word, Excel, and Power Point to create/modify briefs, spreadsheets, and formal requests/documentation.</li><li>Must be able to provide accurate and timely contract deliverable reports, documents, and analyses required for the overall management of the supply/logistics program functions.</li><li>Must be thoroughly familiar with technical directives, periodic maintenance requirement cards, maintenance manuals, and illustrated parts breakdowns, to conduct research on and parts requirements / procurement.</li><li>Must have good working knowledge of automated supply systems and efficiency in data entry.</li><li>Must successfully complete HAZMAT training as required for this position.</li><li>Must be able to meet any Government/Company licensing/qualification requirements for the position, to include operation of warehouse equipment: Forklift, pallet jack, etc</li><li>Must possess strong communication skills, to include the ability to professionally communicate in writing and verbal capacities, to interface with squadron personnel, and to other supporting organizations.</li><li>Must be able to work directly with the customer and Kuwait Air Force officers providing accurate and timely information as requested via telephone, verbal, and email communication.</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.</li><li>Must be able to multitask, have the ability to learn quickly, and have strong attention to detail and follow-through skills.</li><li>Excellent time management &amp; problem-solving skills.</li><li>Must be able to cross-train to support maintenance technicians in completing aircraft towing &amp; jacking evolutions.</li><li>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must perform as a team member, contributing to the success of the C-130J / CSE program.</li><li>Must have a proven ability to work independently with minimal direction.</li></ul><p></p></section>

<p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p><strong>Job Summary:</strong> Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong> <u>Job Summary:</u> </strong> </p> <p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p> <p> <strong> <u>Roles &amp; Responsibilities:</u> </strong> </p> <p> <strong>General duties:</strong> </p> <ul> <li>Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping.</li> <li>Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</li> </ul> <p> <strong>Lifting Operations:</strong> </p> <ul> <li>Hook on loads for the crane and forklift operators and act as a banksman when required. </li> <li>Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. </li> <li>Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</li> </ul> <p> <strong>Rig Move:</strong> </p> <ul> <li>Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</li> </ul> <p> <strong>Drilling / Work-over Operations:</strong> </p> <ul> <li>Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc.</li> <li>Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required.</li> <li>Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</li> </ul> <p> <strong>Materials &amp; Equipment:</strong> </p> <ul> <li>Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed.</li> <li>Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</li> </ul> <p> <strong>Housekeeping:</strong> </p> <ul> <li>Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs.</li> <li>Ensure that housekeeping standards in all areas are in accordance with Company requirements.</li> <li>Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects.</li> <li>Prepare surfaces for painting and apply paint as directed. </li> <li>Secure the current work area or operation before evacuating during emergency situations or drill.</li> </ul> <p> <strong> <u>Job Requirements:</u> </strong> </p> <p> <strong>Education &amp; Experience:</strong> </p> <ul> <li>High School or Technical Degree</li> <li>Preferably 1 year of working experience preferably in similar Oil and Gas industries.</li> <li>Minimum age 20 years up to 27 years old.</li> </ul> <p> <strong>Skills/Competencies Required:</strong> </p> <ul> <li>Elementary level of English language.</li> <li>Basic Mathematical skills adding, subtracting, dividing, multiplying .</li> <li>Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</li> </ul> <p> <strong>Physical Requirements:</strong> </p> <ul> <li>Frequent climbing (stairs, ladders).</li> <li>Frequent lifting, pulling &amp; pushing as per Company procedure.</li> <li>Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold.</li> <li>Ability to work in day/night shifts.</li> </ul> <p> <strong>Certifications:</strong> </p> <ul> <li>As per ADES Training Matrix.</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong> <u>Job Summary:</u> </strong> </p> <p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p> <p> <strong> <u>Roles &amp; Responsibilities:</u> </strong> </p> <p> <strong>General duties:</strong> </p> <ul> <li>Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping.</li> <li>Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</li> </ul> <p> <strong>Lifting Operations:</strong> </p> <ul> <li>Hook on loads for the crane and forklift operators and act as a banksman when required. </li> <li>Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. </li> <li>Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</li> </ul> <p> <strong>Rig Move:</strong> </p> <ul> <li>Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</li> </ul> <p> <strong>Drilling / Work-over Operations:</strong> </p> <ul> <li>Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc.</li> <li>Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required.</li> <li>Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</li> </ul> <p> <strong>Materials &amp; Equipment:</strong> </p> <ul> <li>Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed.</li> <li>Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</li> </ul> <p> <strong>Housekeeping:</strong> </p> <ul> <li>Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs.</li> <li>Ensure that housekeeping standards in all areas are in accordance with Company requirements.</li> <li>Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects.</li> <li>Prepare surfaces for painting and apply paint as directed. </li> <li>Secure the current work area or operation before evacuating during emergency situations or drill.</li> </ul> <p> <strong> <u>Job Requirements:</u> </strong> </p> <p> <strong>Education &amp; Experience:</strong> </p> <ul> <li>High School or Technical Degree</li> <li>Preferably 1 year of working experience preferably in similar Oil and Gas industries.</li> <li>Minimum age 20 years up to 27 years old.</li> </ul> <p> <strong>Skills/Competencies Required:</strong> </p> <ul> <li>Elementary level of English language.</li> <li>Basic Mathematical skills adding, subtracting, dividing, multiplying .</li> <li>Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</li> </ul> <p> <strong>Physical Requirements:</strong> </p> <ul> <li>Frequent climbing (stairs, ladders).</li> <li>Frequent lifting, pulling &amp; pushing as per Company procedure.</li> <li>Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold.</li> <li>Ability to work in day/night shifts.</li> </ul> <p> <strong>Certifications:</strong> </p> <ul> <li>As per ADES Training Matrix.</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To efficiently perform installation &amp; commissioning of mechanical and projects installations within KDD in accordance with KDD as well as international standards and norms.</p><p>Ensure high-quality mechanical installation, commissioning, testing, and validation of piping systems and fittings of various materials within KDDC. Deliver effective insulation and cladding works for piping systems in compliance with dairy industry standards and specifications. Ensure adherence to Standard Operating Procedures (SOPs) and quality control requirements throughout all mechanical activities. Maintain compliance with Health, Safety, and Environment (HSE) regulations and KDD safety standards at all times. Support smooth project execution by coordinating effectively within the project team and following management directives. Ensure workplace organization and housekeeping standards are consistently maintained through 5S methodology.</p><p>Perform installation, alignment, testing, and commissioning of mechanical piping systems and related fittings. Carry out insulation works and cladding for piping systems using different material types. Interpret assembly instructions and ensure correct parts, tools, and materials are available before execution. Conduct quality checks to ensure work meets required standards and specifications. Build and dismantle scaffolding safely when required for site operations. Operate equipment such as forklift, reach truck, scissor lift, and genie boom (if certified/assigned). Follow all required permits before starting work, including Hot Work Permits and Working at Height permits. Perform additional site duties as assigned, such as gas cylinder handling, painting, and weekly cleaning tasks. Maintain a clean, safe, and organized working environment at all times. Report issues, progress, and site requirements to supervisors or project engineers. Support continuous improvement by applying 5S principles in daily work activities. Ensure strict compliance with company rules, safety procedures, and regulatory requirements within Kuwait.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must hold a valid Trade Certificate in a relevant mechanical field. Must have proven experience working on project-based mechanical installation or maintenance activities. Should possess strong hands-on technical skills in piping, fitting, insulation, and related mechanical works. Ability to read and understand technical drawings, instructions, and site requirements. Must be capable of working in a practical/site assessment to verify technical competency and skill level. Strong awareness and adherence to Health, Safety, and Environment (HSE) standards.</p><p></p></section>

<p><h4>Job Description</h4> <p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and be responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <p>This role requires the candidate to obtain Disclosure and Barring Service (DBS) check through UK Government prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM Medical for deployment.</p> <h4>Knowledge & Skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</p> <p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p> <p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</p> <p>Working knowledge of technical publications and logistics information systems.</p> <p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</p> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical Requirements / Working Environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</p> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> <p>Will handle dirty parts and lubricants.</p> <p>Will be required to wear proper personal protective equipment (PPE).</p> <p>Must be able to pass a respirator physical and fit test qualification.</p> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> <p>May work in maintenance shop or outside.</p> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> <p>May be exposed to extreme noise from operating equipment.</p> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></p><p></p>

<p><h4>Job description</h4> <p>The aircraft mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM medical for deployment.</p> <h4>Knowledge & skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements / working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. JOB DETAILS Direct Report Project HSE Manager Operational Scope Civil Works | Drilling &amp; Completions | Work Over | Facilities | Production Supervises Mechanical Lifting contractors; Drilling Rig Lifting Crews; any Contractor performing Mechanical Lifting activities under SLB operational control; site level DROPS auditors and HSE Specialists in their execution of the DROPS Program</p><p>2. ROLE PURPOSE The Mechanical Lifting &amp; DROPS Subject Matter Expert Lead is the SLB Mutriba Project authority for the safe design, planning, execution, and continuous improvement of Mechanical Lifting and Dropped Objects Prevention (DROPS) activities across the Mutriba Field Development Project. The role combines planning and operational SME oversight of lifting operations with assurance of the Project's DROPS system implementation, ensuring full compliance with SLB standards, client requirements, and applicable regulatory frameworks across all project phases and contractor interfaces.</p><p>3. KEY RESPONSIBILITIES</p><p>Mechanical Lifting SME</p><ul><li>Lead the planning, preparation, implementation, monitoring, and review of Mechanical Lifting Plans (MLPs) for all project phases, including all prevention and mitigation measures.</li><li>Review and validate all critical lifting plans prepared by SLB and Contractors, categorize lifts in accordance with the Lift Categorization Questionnaire, and submit Critical and Non-Routine lifts to the right channels.</li><li>Personally supervise the execution of Non-Routine, Critical, and Complex lifts across all project locations, such as Rig Mobilization, Initial Rig Moves, Skidding operations and de-mobilization.</li><li>Ensure all lifting risk assessments (HARC/JSA) are prepared, reviewed, and adequate prior to the commencement of any lifting operation.</li><li>Assess Pre-Job Safety Meetings (PJSMs) related to mechanical lifting operations and verify that controls identified in the MLP and HARC are communicated and understood by all participants.</li><li>Advise and stop lifting operations during adverse weather conditions (lightning, high-wind events) and verify suspension and resumption criteria are clearly defined and enforced at site level.</li><li>Establish, maintain, and audit all Project Lifting Equipment Registers across all rig sites and call-out services, ensuring all lifting appliances and accessories are inspected, certified, color-coded, and fit for purpose.</li><li>Verify that third-party lifting equipment introduced to SLB managed sites holds valid certification from an LEEAaccredited or equivalent body, aligned with applicable standards.</li><li>Ensure adequate storage and in-service maintenance of all lifting gear and accessories in accordance with Project and client s requirements.</li><li>Drive compliance with SLB's Mechanical Lifting Standard (SLB-HSE-S013) and Mechanical Lifting B.O.O.K. (SLB-HSE-M013) across all contractor interfaces.</li><li>Conduct frequent, structured audits of all ML activities and equipment at rig sites and call-out service locations, documenting findings and tracking corrective actions closure.</li><li>Perform ML related assessments for the Annual Audit and Inspection Plan (AAIP) to verify ongoing compliance with SLB standards, client procedures, and regulatory requirements.</li><li>Report all lifting-related events in QUEST (SLB incident management system) in a timely manner, ensuring accuracy of classification, causal analysis, and corrective/preventive action assignment.</li><li>Lead or actively participate in investigations of any incident, near miss, or high-potential event related to mechanical lifting operations.</li><li>Coach, assess, and verify the competence of personnel involved in ML operations such as Lifting Supervisors, Crane Operators, Banksmen, and Riggers, against defined competency frameworks.</li><li>Maintain competency assessment records and ensure training validity periods are tracked and renewed.</li><li>Deliver or coordinate delivery of ML awareness and technical training as required by project needs.</li><li>Serve as primary interface with customer s Lifting Authority for ML plans, approvals, and regulatory compliance.</li></ul><p>DROPS Authority</p><ul><li>Project-level DROPS Program Assurance Lead for integrity, consistency, and effectiveness of the DROPS prevention program across all Mutriba Project locations.</li><li>Review, evaluate, and formally validate DROPS Inspection Reports submitted by rig sites and service locations, verifying accuracy on findings, classification, and effectiveness and closure of corrective actions.</li><li>Validate the correct implementation of DROPS, including DROPS Zone identification, zoning maps, barrier deployment, DROPS Picture Books, tethered tool program, and related.</li><li>Conduct structured DROPS Program audits across all active project phases and locations, assessing compliance with SLB-HSE-S023 (DROPS Standard) and the DROPS B.O.O.K. (SLB-HSE-M023).</li><li>Verify DROPS inspection checklists for rig-ups, and the maintenance of DROPS Inspection Schedules.</li><li>Support site-level HSE Supervisors in identifying dropped object and Work at Height hazards.</li><li>Ensure DROPS incidents are reported, classified, and investigated in accordance with project and SLB requirements, and lessons-learned dissemination across the project.</li><li>Maintain and monitor DROPS program performance metrics; escalate systemic non-conformances.</li></ul><p>Additional Responsibilities</p><ul><li>Participate in Project HAZOP/HARC processes as the ML and DROPS SME for ML scenarios under review.</li><li>Support development and review of project HSE Plans, procedures, and standards related to ML and DROPS.</li><li>Contribute to pre-mobilization readiness reviews as the ML/DROPS technical authority.</li><li>Support emergency response planning for lifting-related scenarios (crane collapse, load drop, manriding rescue) and verify that adequate rescue plans are in place.</li><li>Assist developing the Annual Audit and Inspection Plan (AAIP) for ML and DROPS activities.</li></ul><p>4. AUTHORITY</p><ul><li>Authority to Stop Work on any mechanical lifting or related activity that does not comply with approved lift plans, SLB standards, or client requirements.</li><li>Authority to reject and require re-submission of non-compliant lift plan with SLB or client requirements.</li><li>Authority to require the removal of lifting equipment or accessory found defective, uncertified, or non-compliant.</li><li>Authority to withhold validation for any site or location non-compliant with DROPS system requirements.</li><li>Authority to escalate non-conformances to Contractor and Project Management</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in engineering or Technical Career</li><li>Professional Certification: LEEA Appointed Person for Lifting Operations or similar.</li><li>Third-party certification credited by LEEA or NSL.</li><li>DROPS Level 3 Focal Point.</li><li>Minimum 10 years of experience in a dedicated Mechanical Lifting supervisory or SME capacity, preferably on the Oil &amp; Gas Industry.</li><li>Demonstrated experience operating in multi-contractor onshore drilling environments, including direct supervision of crane, rigging, and lifting appliance crews.</li><li>Prior experience conducting DROPS program audits and managing DROPS systems at rig or field level</li><li>Fluent English mandatory. Arabic is an advantage.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>1. JOB DETAILS</p><br><p>Direct Report Project HSE Manager</p><br><p>Operational Scope Civil Works | Drilling &amp; Completions | Work Over | Facilities | Production</p><br><p>Supervises Mechanical Lifting contractors; Drilling Rig Lifting Crews; any Contractor performing Mechanical Lifting activities under SLB operational control; site level DROPS auditors and HSE Specialists in their execution of the DROPS Program</p><br><p>2. ROLE PURPOSE</p><br><p>The Mechanical Lifting &amp; DROPS Subject Matter Expert Lead is the SLB Mutriba Project authority for the safe design, planning, execution, and continuous improvement of Mechanical Lifting and Dropped Objects Prevention (DROPS) activities across the Mutriba Field Development Project. The role combines planning and operational SME oversight of lifting operations with assurance of the Project's DROPS system implementation, ensuring full compliance with SLB standards, client requirements, and applicable regulatory frameworks across all project phases and contractor interfaces.</p><br><p>3. KEY RESPONSIBILITIES</p><br><p>Mechanical Lifting SME</p><br><p>→ Lead the planning, preparation, implementation, monitoring, and review of Mechanical Lifting Plans (MLPs) for all project phases, including all prevention and mitigation measures.</p><br><p>→ Review and validate all critical lifting plans prepared by SLB and Contractors, categorize lifts in accordance with the Lift Categorization Questionnaire, and submit Critical and Non-Routine lifts to the right channels.</p><br><p>→ Personally supervise the execution of Non-Routine, Critical, and Complex lifts across all project locations, such as Rig Mobilization, Initial Rig Moves, Skidding operations and de-mobilization.</p><br><p>→ Ensure all lifting risk assessments (HARC/JSA) are prepared, reviewed, and adequate prior to the commencement of any lifting operation.</p><br><p>→ Assess Pre-Job Safety Meetings (PJSMs) related to mechanical lifting operations and verify that controls identified in the MLP and HARC are communicated and understood by all participants.</p><br><p>→ Advise and stop lifting operations during adverse weather conditions (lightning, high-wind events) and verifysuspension and resumption criteria are clearly defined and enforced at site level.</p><br><p>→ Establish, maintain, and audit all Project Lifting Equipment Registers across all rig sites and call-out services, ensuring all lifting appliances and accessories are inspected, certified, color-coded, and fit for purpose.</p><br><p>→ Verify that third-party lifting equipment introduced to SLB managed sites holds valid certification from an LEEAaccredited or equivalent body, aligned with applicable standards.</p><br><p>→ Ensure adequate storage and in-service maintenance of all lifting gear and accessories in accordance with</p><br><p>Project and client's requirements.</p><br><p>→ Drive compliance with SLB's Mechanical Lifting Standard (SLB-HSE-S013) and Mechanical Lifting B.O.O.K. (SLB-HSE-M013) across all contractor interfaces.</p><br><p>→ Conduct frequent, structured audits of all ML activities and equipment at rig sites and call-out service locations, documenting findings and tracking corrective actions closure.</p><br><p>→ Perform ML related assessments for the Annual Audit and Inspection Plan (AAIP) to verify ongoing compliance with SLB standards, client procedures, and regulatory requirements.</p><br><p>→ Report all lifting-related events in QUEST (SLB incident management system) in a timely manner, ensuring accuracy of classification, causal analysis, and corrective/preventive action assignment.</p><br><p>→ Lead or actively participate in investigations of any incident, near miss, or high-potential event related to mechanical lifting operations.</p><br><p>→ Coach, assess, and verify the competence of personnel involved in ML operations such as Lifting Supervisors, Crane Operators, Banksmen, and Riggers, against defined competency frameworks.</p><br><p>→ Maintain competency assessment records and ensure training validity periods are tracked and renewed.</p><br><p>→ Deliver or coordinate delivery of ML awareness and technical training as required by project needs.</p><br><p>→ Serve as primary interface with customer's Lifting Authority for ML plans, approvals, and regulatory compliance.</p><br><p>DROPS Authority</p><br><p>→ Project-level DROPS Program Assurance Lead for integrity, consistency, and effectiveness of the DROPS prevention program across all Mutriba Project locations.</p><br><p>→ Review, evaluate, and formally validate DROPS Inspection Reports submitted by rig sites and service locations, verifying accuracy on findings, classification, and effectiveness and closure of corrective actions.</p><br><p>→ Validate the correct implementation of DROPS, including DROPS Zone identification, zoning maps, barrier deployment, DROPS Picture Books, tethered tool program, and related.</p><br><p>→ Conduct structured DROPS Program audits across all active project phases and locations, assessing compliance with SLB-HSE-S023 (DROPS Standard) and the DROPS B.O.O.K. (SLB-HSE-M023).</p><br><p>→ Verify DROPS inspection checklists for rig-ups, and the maintenance of DROPS Inspection Schedules.</p><br><p>→ Support site-level HSE Supervisors in identifying dropped object and Work at Height hazards.</p><br><p>→ Ensure DROPS incidents are reported, classified, and investigated in accordance with project and SLBrequirements, and lessons-learned dissemination across the project.</p><br><p>→ Maintain and monitor DROPS program performance metrics; escalate systemic non-conformances.</p><br><p>Additional Responsibilities</p><br><p>→ Participate in Project HAZOP/HARC processes as the ML and DROPS SME for ML scenarios under review.</p><br><p>→ Support development and review of project HSE Plans, procedures, and standards related to ML and DROPS.</p><br><p>→ Contribute to pre-mobilization readiness reviews as the ML/DROPS technical authority.</p><br><p>→ Support emergency response planning for lifting-related scenarios (crane collapse, load drop, manriding rescue) and verify that adequate rescue plans are in place.</p><br><p>→ Assist developing the Annual Audit and Inspection Plan (AAIP) for ML and DROPS activities.</p><br><p>4. AUTHORITY</p><br><p>→ Authority to Stop Work on any mechanical lifting or related activity that does not comply with approved lift plans,SLB standards, or client requirements.</p><br><p>→ Authority to reject and require re-submission of non-compliant lift plan with SLB or client requirements.</p><br><p>→ Authority to require the removal of lifting equipment or accessory found defective, uncertified, or non-compliant.</p><br><p>→ Authority to withhold validation for any site or location non-compliant with DROPS system requirements.</p><br><p>→ Authority to escalate non-conformances to Contractor and Project Management<br></p><br><p><strong> Education</strong>: Bachelor's degree in engineering or Technical Career</p><br><p><strong>Professional Certification:</strong></p><br><p>* LEEA Appointed Person for Lifting Operations or similar.</p><br><p>* Third-party certification credited by LEEA or NSL.</p><br><p>* DROPS Level 3 - Focal Point.</p><br><p><strong>Experience</strong>:</p><br><p>* Minimum 10 years of experience in a dedicated Mechanical Lifting supervisory or SME capacity, preferably onthe Oil &amp; Gas Industry.</p><br><p>* Demonstrated experience operating in multi-contractor onshore drilling environments, including direct supervisionof crane, rigging, and lifting appliance crews.</p><br><p>* Prior experience conducting DROPS program audits and managing DROPS systems at rig or field level</p><br><p><strong>Language</strong>: Fluent English mandatory. Arabic is an advantage.<br></p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</li><li>Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</li><li>Minimum Requirements : High School Diploma or Equivalent is required.</li><li>With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. All experience must be within the Five (5) most recent years.</li><li>Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required. All experience must be within the Six (6) most recent years.</li><li>U.S. Military Technical school or specialized training course is desired, certification of education level is required.</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Security Clearance Requirements: Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li><li>Must be able to obtain and maintain facility credentials/authorization.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Additional and Preferred Qualifications : Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li><li>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li><li>May be expected to work in austere environments and all-weather conditions</li></ul>

<p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p><strong>Desired Candidate Profile</strong></p><p>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</p><p>Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</p><p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p><p>Safely prepare aircraft for inspections and maintenance checks and services.</p><p>Perform scheduled inspections and assist in performing special inspections.</p><p>Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p><p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p><p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Perform other duties as requested.</p><strong>Minimum Requirements :</strong><p>High School Diploma or Equivalent is required.</p><p>With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required.</p><p>All experience must be within the Five (5) most recent years.</p><p>Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required.</p><p>All experience must be within the Six (6) most recent years.</p><p>U.S. Military Technical school or specialized training course is desired, certification of education level is required.</p><p>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</p><p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</p><p>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</p><strong>Security Clearance Requirements:</strong><p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</p><strong>Additional and Preferred Qualifications :</strong><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p><p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p><p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p><p>Working knowledge of technical publications and Logistics Information Systems.</p><p>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p><p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><strong>Physical Requirements/Working Environment</strong><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to climb stairs, ramps, ladders, and work stands.</p><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p><p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>Will handle dirty parts and lubricants.</p><p>Will be required to wear proper Personal Protective Equipment (PPE).</p><p>Must be able to pass a Respirator Physical and Fit Test qualification.</p><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p><p>Must be able to lift/push/pull minimum of 50 pounds.</p><p>May work in maintenance shop or outside.</p><p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>May be exposed to extreme noise from operating equipment.</p><p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>May be expected to work in austere environments and all-weather conditions</p>

<p><h4>Job description</h4> <p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>With a valid (FAA) A&P certificate (preferred), two (2) years of aviation maintenance experience, two (2) years rotary wing aircraft experience, and two (2) years on the assigned MDS UH-60 aircraft is required. (See below for requirements without A&P).</p> <p>Valid US passport and US citizenship is required to obtain the NAC-I clearance and for facility access.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> <p>Perform scheduled inspections and assist in performing special inspections.</p> <p>Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.</p> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Perform other duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>With a valid (FAA) A&P certificate, two (2) years of aviation maintenance experience, two (2) years rotary wing aircraft experience, and two (2) years on the assigned MDS UH-60 aircraft is required. All experience must be within the five (5) most recent years.</li> <li>Without a valid (FAA) A&P certificate; must have three (3) years aviation maintenance experience, three (3) years of rotary wing aircraft experience, and a minimum of three (3) years on the assigned UH-60 Mission Design Series (MDS) is required. All experience must be within the six (6) most recent years.</li> <li>U.S. military technical school or specialized training course is desired; certification of education level is required.</li> <li>A valid US passport is required for deployment to Kuwait. The passport must have 3 years remaining before expiring and 6 blank pages available at the time of hire and deployment.</li> <li>Must be able to pass and clear CENTCOM Army MOD physical and requirements for deployment (will attend CRC/DIDC training).</li> <li>Must be able to obtain Kuwait PCC clearance and visa prior to deployment.</li> </ul> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US government NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p><p>Operationally checks repaired or modified systems for proper operation.</p><p>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</p><p>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.</p><p>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</p><p>Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.</p><p>Disassemble and inspect parts for wear, warping, or other defects.</p><p>Repair or replace defective engine parts and reassembles and installs engine in aircraft.</p><p>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</p><p>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</p><p>Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.</p><p>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</p><p>Ability to read, write, and interpret technical duties is required.</p><p>Ability to communicate effectively with all levels of employees throughout the organization.</p><p>May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.</p><p>Perform other qualified duties as assigned.</p><p>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</p><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to climb stairs, ramps, ladders and work stands.</p><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>May be required to carry, push or pull up to and may exceed 50 pounds.</p><p>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</p><p>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</p><p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>Must be able to distinguish color and judge three dimensional depths.</p><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</p><p>Must have minimum 20/100 near and far vision, correctable to 20/20.</p><p>Must be capable of living and working in a potentially hostile environment for an extended period.</p><p>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</p><p>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</p><p>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</p><p>Minimum Requirements</p><p>High school diploma or GED equivalent is Required.</p><p>A valid (FAA) A&amp;P Certificate is Required.</p><p>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</p><p>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</p><p>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</p><p>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</p><p>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</p><p>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait).</p><p>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</p><p>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</p><p>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20)</p><p>Mechanic Pre-employment Medical Requirements:</p><p>Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</p><p>Security Clearance Requirements:</p><p>Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</p><p></p></section>