Equipment operator Jobs

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>Establish radiation areas for radiographic operations.</p><p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>Perform nondestructive inspection on structures, components, and systems.</p><p>Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>Operate, maintain, and inspect nondestructive equipment.</p><p>Perform operator maintenance and service inspections on shop equipment and tools.</p><p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>Perform silver recovery functions.</p><p>Handle and dispose of hazardous waste and materials.</p><p>Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Overview</strong> <br> <br> <p> <strong> <span> <span>**This position will be physically located in Kuwait in support of LOGCAP**</span> </span></strong> </p> <p> </p> <p>Under the supervision of the Material Maintenance Manager &amp; Technical Inspector Lead, performs initial, in-progress and final inspections on various types of military, commercial, and other forms of Automotive equipment. Makes proper classification determinations as it pertains to U.S. Government property. Assists Shops as needed with Troubleshooting processes. Uses proper Test Measurement and Diagnostics Equipment (TMDE) in the daily operations phase. Conducts Actual Cost of Damages (ACOD), Estimated Cost of Damages (ECOD), and Estimated Cost of Repairs (ECOR). Conduct Tests on Serviced, Repaired and Overhauled equipment to ensure operating efficiency before returning to customer. Understands the automotive repair shop equipment and functions in order to provide assistance and coverage whenever needed. Perform technical research and ensure operational readiness of assigned equipment.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong> <em> <span> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span> </span></em> </strong> </p> <ul> <li>Perform initial, in-progress, classification and final inspections.</li> <li>Utilize Global Combat Support System-Army (GCSS-A), DOD CAC access required.</li> <li>Operate and inspect equipment to diagnose and troubleshoot defects.</li> <li>Use technical manuals, bulletins and written directives in the performance of all inspections.</li> <li>Examine parts for damage or excessive wear using micrometers and gauges.</li> <li>Order required repair parts using appropriate military or COTS technical manuals.</li> <li>Perform battlefield damage assessment and repair (BDAR).</li> <li>Classifies equipment for disposal IAW Army regulations and verify equipment condition codes.</li> <li>Perform testing and certification of equipment and material during Load Testing Process.</li> <li>Perform PDQR process when receiving improper or damaged repair parts.</li> <li>Perform load testing of various equipment IAW applicable technical reference.</li> <li>Performs other duties as assigned.</li> <li>Suggests improvements to processes and have the capability of writing or rewriting process improvements as needed.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>MINIMUM QUALIFICATIONS:</strong> <ul> <li>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required.</li> <li>High School Graduate or equivalent.</li> <li>Requires civilian trade qualification or US Army/Air Force/USMC Wheel Mechanic or equivalent (DD214 required).</li> <li>A valid US Driver s License and the ability to obtain a U.S. Government Motor Vehicle Operator s License and Kuwait Driver s License are required.</li> </ul> </li> <li> <strong>Experience</strong>:<ul> <li>A minimum of Five (5) years experience in Automotive Repair, Shop operations or equivalent combination of education and experience is required.</li> <li>A minimum of two (2) years experience as a Technical Inspector is required.</li> </ul> </li> <li> <strong>Skills</strong>:<ul> <li>Must possess the technical skills to identify different repair requirements as it pertains to Automotive Equipment.</li> <li>Must have expert knowledge of Technical and Commercial manuals for Servicing, Operational and Repair so that the correct procedures are used on the proper equipment.</li> <li>Must be an expert in Corrective Actions performed by the Maintenance Teams and only ensure that equipment is FMC when cleared by the shops</li> <li>Must have full knowledge of TMDE and its proper usage.</li> <li>Must be proficient in how the repair parts system works and what to do when it doesn t work correctly.</li> <li>Must be proficient in all phases of the paperwork that pertains to the Services, maintenance, repairs, classification and etc.</li> <li>Must have expert knowledge of the maintenance prints so as to be able to establish workload priority.</li> <li>Must have expert knowledge of Load Test procedures and processes.</li> <li>Must have expert knowledge of equipment operations as it is critical to working as a master driver for that shop.</li> <li>Ability to inspect check and test all types of automotive equipment.</li> <li>Must have a working knowledge of the Army Corrosion Prevention program.</li> <li>Must be Knowledgeable of the Army Maintenance Management Systems (TAMMS)</li> </ul> </li> <li> <strong>Physical Requirements</strong> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> </ul> </li> <li> <strong>Working Conditions</strong> <ul> <li>The worker is subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.</li> <li>The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>1.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Organize and administer the Maintenance Department, ensuring that effective work control and productivity are maintained, whilst using every means to increase productivity and reduce costs.</span></p> <p><span><span>2.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Direct and supervise the implementation of an effective trouble report system, together with other day-to-day works of general maintenance and repair to ensure that the building, its contents and its surroundings are at all times in first-class condition throughout</span></p> <p><span><span>3.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Identify and arrange for all necessary work to maintain a high standard whether mechanical, electrical or civil, to be completed in a timely manner.</span></p> <p><span><span>4.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Ensure that a full preventive maintenance schedule exists for every item of mechanical and electrical plant or equipment,</span></p> <p><span><span>5.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Negotiate terms and conditions for all manufactures / agents and service contracts with the assistance of the controller.</span></p> <p><span><span>6.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Keep up-to-date records of all test certificates / licenses</span></p> <p><span><span>7.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Conduct frequent meetings with other Department Heads to review the current performance of their equipment.</span></p> <p><span><span>8.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Participate in assessing the long-term requirements of the Mall, including overhaul / rehabilitation programs or renewal / replacement works, etc. In conjunction with TMM General Manager – Maintenance.</span></p> <p><span><span>9.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Responsible for budgeting and financial planning for the Maintenance Department</span></p> <p><span><span>10.<span>&nbsp; </span></span></span><span>Perform other related duties as assigned or requested</span></p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 7+ years </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>All candidates shall possess the required technical competence, relevant qualifications, and practical experience to perform their assigned duties efficiently.</p><p><br></p><ol><li>OO Experience in Operation and Maintenance of Sewage Pumping Stations.</li><li>OO Minimum 3 years</li></ol><p><br></p><p><br></p><p>/ REQUIRED POSITIONS /</p><p><br></p><ol><li>OO Electrical Engineer</li><li>OO Mechanical Engineer</li><li>OO Instrumentation Engineer</li><li>OO Safety Engineer</li><li>OO Scada Operator</li><li>OO Lift Operator</li><li>OO AC Technician</li><li>OO Pumping Station Operator</li><li>OO Electrician </li><li> OO Mechanic</li><li> OO Rotating Mechanic</li><li> OO Mechanical Technician</li><li> OO Electrical Technician</li><li> OO HVAC / Chiller Technician</li><li> OO Plumber</li><li>. OO Labour</li><li>. OO Helper (Mechanical)</li><li>. OO Labour / Helper (HVAC)</li><li>. OO Instrumentation Technician</li></ol><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>As mentioned </p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong>Install and Configure Network Equipment</strong></p><ul><li><p>Set up routers, switches, firewalls, wireless access points, and network cabling.</p></li><li><p>Configure LAN, WAN, VPN, and wireless networks.</p></li></ul><ol><li><p><strong>Monitor Network Performance</strong></p><ul><li><p>Continuously monitor network availability and performance.</p></li><li><p>Identify and resolve network bottlenecks and outages.</p></li><li><p>Ensure maximum uptime and reliability.</p></li></ul></li><li><p><strong>Troubleshoot Network Issues</strong></p><ul><li><p>Diagnose hardware, software, and connectivity problems.</p></li><li><p>Resolve internet, server, and communication issues.</p></li><li><p>Provide technical support to employees experiencing network-related problems.</p></li></ul></li><li><p><strong>Maintain Network Security</strong></p><ul><li><p>Configure and manage firewalls and intrusion prevention systems.</p></li><li><p>Implement security policies and access controls.</p></li><li><p>Monitor for cyber threats and respond to security incidents.</p></li><li><p>Apply security patches and firmware updates.</p></li></ul></li><li><p><strong>Manage User Accounts and Access</strong></p><ul><li><p>Create, modify, and remove user accounts.</p></li><li><p>Assign appropriate network permissions.</p></li><li><p>Support authentication services such as Active Directory.</p></li></ul></li><li><p><strong>Perform Network Maintenance</strong></p><ul><li><p>Upgrade network hardware and software.</p></li><li><p>Replace faulty equipment.</p></li><li><p>Conduct preventive maintenance to minimize downtime.</p></li></ul></li><li><p><strong>Backup and Disaster Recovery</strong></p><ul><li><p>Maintain backup systems for network configurations and critical data.</p></li><li><p>Develop and test disaster recovery procedures.</p></li><li><p>Restore network services after failures or disasters.</p></li></ul></li><li><p><strong>Document Network Infrastructure</strong></p><ul><li><p>Maintain network diagrams and configuration records.</p></li><li><p>Document IP addressing schemes, device inventories, and procedures.</p></li><li><p>Keep maintenance and incident logs up to date.</p></li></ul></li><li><p><strong>Support Servers and Network Services</strong></p><ul><li><p>Manage services such as DNS, DHCP, VPN, email, and file sharing.</p></li><li><p>Ensure servers and network applications operate efficiently.</p></li></ul></li><li><p><strong>Plan Network Expansion</strong></p><ul><li><p>Evaluate future networking requirements.</p></li><li><p>Recommend hardware and software upgrades.</p></li><li><p>Assist in designing scalable network infrastructure.</p></li></ul></li><li><p><strong>Ensure Compliance</strong></p><ul><li><p>Follow organizational IT policies and industry standards.</p></li><li><p>Help ensure compliance with security and data protection regulations.</p></li></ul></li><li><p><strong>Coordinate with Vendors</strong></p><ul><li><p>Work with internet service providers and equipment vendors.</p></li><li><p>Arrange repairs, replacements, and technical support.</p></li><li><p>Evaluate new networking technologies and solutions. </p></li></ul></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualification : </strong> B. E., (or) B. Sc., Computer Science (4/3 Years Full Time Course). CCNA Certification is Must.</p><p><strong>Experience:</strong></p><p>Minimum 6 Years Experience in Network Administrator role. Good communication skills / computer skills (MS Office). Hands on experience in networking, routing and switching, Knowledge of best practices around management, control &amp; monitoring of server infrastructure. Experience with firewalls, Internet VPN’s remote implementation, troubleshooting, and problem resolution is Mandatory. Ability to set up and configure server hardware. Familiarity with backup and recovery software and methodologies </p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Sorts, processes and folds Rooms and F&amp;B linens such as sheets, towels, table clothes, and napkins. Sorts used linens into appropriate categories for washing. Sorts out stained or torn linen. Loads and unloads driers. Shakes wet sheets, table linens and napkins prior to ironing in order to spread them out. Feeds washed linens into ironer. Retrieves folded linens and stacks or hangs clean linens as appropriate. Sorts clean towels, rugs and robes. Uses towel folder and manual folding for bath towels, washcloths, rugs and robes. Places folded product on appropriate rack. Operates and maintains folding equipment. Reports any problems or deficiencies to manager. Complies with Four Seasons Category One and Category Two Work Rules and Standards of Conduct as set forth in Impact. Works harmoniously and professionally with co-workers and supervisors. Assists with responsibilities and duties in the absence or heavy volume in the areas of Valet Dry Cleaning and Housekeeping.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>At least 2 years experience in the similar role in a five-star luxury hotel. Ability to function under pressure. Display a high work ethic; with a sense of responsibility for the role within our team. Good organizational skills with the ability to work independently.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Assistant Well Site Leader is responsible for providing clear leadership in every aspect of HSE protection, ensuring safe working practices are used. They assist the Well Site Leader in conducting well operations safely, in accordance with the approved well operations program, and in compliance with the applicable policies/standards/procedures and regulatory requirements within the allocated time/cost with optimal use of resources. They develop required training and on-the-job exposure to develop the skills needed to become a Well Site Leader. </p><ul><li>Organize and lead brief and debrief safety and operations meetings that are related to well operations.</li><li>Lead daily planning meetings and discuss operations with customer representatives, contractors, PL and third-party supervisors.</li><li>Attend daily planning call with supervisors from various parties.</li><li>Update forecast and planned activity to anticipate resource requirements to meet well demands and provide optimum efficiency of services.</li><li>Check that equipment and services comply with the contract.</li><li>Manage proper inventory of tangibles such as, but not limited to, cement, barite, bits, as well as rental equipment, and coordinate with PL OP and third-party suppliers as needed.</li><li>Prepare and ensure material and equipment requests are issued in a timely manner to avoid disruption of operation.</li><li>Ensure that operations are conducted to prevent the risk of well control, stuck pipe, and any other project and operational risks.</li><li>Prepare detailed procedures for specific operations (i.e., running casing, cementing, etc.), including technical and operational calculations as relevant to the well- or rig-site operations (e.g., casing volume.)</li><li>Ensure compliance with Schlumberger policies and Integration PL standards, including standing orders.</li><li>Manage and monitor operations communications to ensure stakeholders are kept informed and service providers possess information they need to perform their services.</li><li>Prepare daily cost estimates based on goods consumed and services provided.</li><li>Participate in operational performance improvements and program changes with the project team.</li><li>Review operational problems and support job incidents, changes, incident response and recovery, including coordination with the individual PLs and key contractors.</li><li>Ensure support to other functional processes and product lines with proper handoffs at key interfaces.</li></ul><p>10+</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Overview</strong> <br> <br> <p> <strong> <span> <span>**This position will be physically located in Kuwait in support of LOGCAP**</span> </span></strong> </p> <p> </p> <p> <span>Under the supervision of the Pest Management Coordinator; a<span>ssures safety practices are followed. Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry-particular equipment for LOGCAP V AOR. Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides. Coordinates work/inspections with facility managers/occupants. Researches materials, and prepares necessary documents. Responds to emergency service calls during regular hours or after-duty on-call hours. </span> </span> </p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong> <em> <span> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span> </span></em> </strong> </p> <ul> <li>Assures safety practices are followed</li> <li>Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry-particular equipment for LOGCAP V AOR.</li> <li>Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides.</li> <li>Coordinates work/inspections with facility managers/occupants.</li> <li>Researches materials, and prepares necessary documents.</li> <li>Responds to emergency service calls during regular hours or after-duty on-call hours.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Minimum Qualifications:</strong> Education/Certifications: One year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>Must be a U.S. Citizen</li> <li>A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required.</li> </ul> </li> <li> <strong>Education:</strong> <ul> <li>High school diploma or equivalent. Must provide a copy of the diploma.</li> </ul> </li> <li> <strong>Experience:</strong> <ul> <li>Minimum of one (1) year experience in the Pest Control field.</li> </ul> </li> <li> <strong>Skills:</strong> <ul> <li>Excellent communication and people skills</li> <li>Able to use computer-automated systems to perform assigned duties.</li> </ul> </li> <li> <strong>Working Conditions:</strong> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <ul> <li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li> <li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li> <li>Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Role Summary: </b>Responsible for conducting microbiological testing and quality monitoring of raw materials, water, in-process products, and finished goods to ensure compliance with food safety, quality, and regulatory standards in a water, juice, or dairy manufacturing environment.</p><p><b>Key Responsibilities:</b></p><ul><li>Perform microbiological testing of raw materials, water, in-process, and finished products. </li><li>Conduct environmental monitoring, sterility testing, and pathogen analysis. </li><li>Monitor and verify CIP/SIP systems and aseptic processing. </li><li>Investigate microbiological deviations and implement corrective actions (CAPA). </li><li>Maintain laboratory equipment calibration and accurate testing records. </li><li>Prepare laboratory reports and support internal and external audits. </li><li>Ensure compliance with GMP, HACCP, FSSC 22000, and company quality standards</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications</b></p><ul><li>Bachelor's Degree in Microbiology, Food Science, Biotechnology, Chemistry, Biological Sciences, or a related field. </li></ul><p><b>Experience</b></p><ul><li><b>3–5 years</b> of experience as a Quality Control Microbiologist in <b>water, juice, dairy, milk, or beverage manufacturing</b>. </li><li>Strong experience in <b>UHT processing</b>, aseptic manufacturing, microbiological testing, and food safety systems (HACCP, FSSC 22000, GMP).</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Job Details / Position Summary The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: + Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. + Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. + Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins. + Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. + Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions + Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components + Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. + Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data + Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. + Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control + Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. + Performs applicable “O” and “I” level battery maintenance functions as required per applicable maintenance manuals. + Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR + Performs scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment (life rafts, first aid kits, etc..), pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated aviation life support equipment, airframes, and power plants systems. + Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. + Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures + Conducts off station maintenance when required. + When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: + High School Diploma + Must be able to obtain/maintain the following required certifications/qualifications: - Aviation Gas Free Engineering (AVGFE) certification - Auxiliary Power Unit (APU) run qualification -“I” Level Battery Maintenance certification - Applicable Support Equipment licensing - Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification - Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification - Corrosion Prevention and Control qualification - Confined Space Entry certification Experience: + Four years’ maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred.. + Must have a working knowledge of first aid procedures to be used in an emergency. + Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: + Must be United States (U.S.) citizen , be able to read, write, and understand the English language + Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. + Must be able to obtain and maintain at a Secret Security Clearance. + Must have a valid U.S. Driver’s License. + Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. + Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. + Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to: The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance. + As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” and “I” level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs. + Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed. + Must have an in-depth knowledge of aircraft technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. + Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must perform as a team member, contributing to the success of the C-130J maintenance department. + Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. + Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: + Healthcare coverage + Life insurance, AD&amp;D, and disability benefits + Retirement plan + Wellness programs + Paid time off, including holidays and leave of absences + Eligible Tuition Reimbursement + Learning and Development resources + Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Key Responsibilities:</strong></p><br><ol> <li><strong>Supervise Maintenance Team</strong> <ul> <li>Lead and manage the maintenance team, including scheduling, task delegation, and performance evaluation.</li> <li>Provide training, guidance, and support to ensure all maintenance personnel are knowledgeable and efficient in their roles.</li> </ul></li> <li><strong>Preventative Maintenance Program</strong> <ul> <li>Develop, implement, and maintain a comprehensive preventative maintenance program to ensure all hotel equipment, systems, and facilities are in optimal working condition.</li> <li>Schedule regular inspections of hotel rooms, common areas, and all equipment to identify potential issues and address them proactively.</li> </ul></li> <li><strong>Repair and Maintenance</strong> <ul> <li>Oversee and carry out routine maintenance tasks such as plumbing, HVAC, electrical, carpentry, painting, and mechanical repairs.</li> <li>Respond to urgent repair requests promptly and ensure that issues are resolved quickly to minimize any disruption to hotel operations or guest services.</li> <li>Coordinate with external contractors when specialized services are required and ensure they complete tasks to standard.</li> </ul></li> <li><strong>Facility Management</strong> <ul> <li>Monitor the condition of the hotel's facilities, including guest rooms, common areas, conference rooms, restaurants, pools, fitness centers, and exterior spaces to ensure all areas are well-maintained and safe for guests and staff.</li> <li>Ensure that all fire safety, security systems, and emergency equipment (e.g., alarms, sprinklers, extinguishers) are fully operational and compliant with local regulations.</li> </ul></li> <li><strong>Inventory and Supplies Management</strong> <ul> <li>Maintain an adequate inventory of parts, tools, and equipment required for repairs and ensure timely ordering of supplies when necessary.</li> <li>Track and control the usage of energy, water, and other resources, and look for opportunities to improve efficiency.</li> </ul></li> <li><strong>Compliance with Health &amp; Safety Regulations</strong> <ul> <li>Ensure all maintenance work is performed in compliance with local health, safety, and environmental regulations, including hotel policies on sanitation and security.</li> <li>Lead and participate in safety drills, training sessions, and hotel safety audits.</li> </ul></li> <li><strong>Budget and Cost Control</strong> <ul> <li>Assist in preparing and managing the maintenance department’s budget, ensuring that all repair and maintenance work is performed cost-effectively.</li> <li>Track expenditures related to repairs, projects, and improvements, and work with management to minimize costs while maintaining quality.</li> </ul></li> <li><strong>Guest Service &amp; Satisfaction</strong> <ul> <li>Address guest requests and concerns related to maintenance promptly and efficiently to ensure guest satisfaction and a positive hotel experience.</li> <li>Communicate effectively with other departments (housekeeping, front desk, etc.) to coordinate and prioritize maintenance tasks without disrupting operations or guest comfort.</li> </ul></li> <li><strong>Energy and Water Conservation Initiatives</strong> <ul> <li>Lead efforts to improve energy efficiency and reduce water consumption within the hotel by implementing sustainable practices and monitoring the effectiveness of installed systems like high-efficiency taps, showerheads, and HVAC systems.</li> </ul></li> <li><strong>Emergency Response</strong> <ul> <li>Act as the first point of contact for emergency maintenance issues, including responding to system failures, leaks, and power outages, and coordinate repair efforts as needed to restore normal operations.</li> </ul></li></ol><p><strong>Qualifications:</strong></p><br><ul> <li>Proven experience as a maintenance supervisor or similar role in the hospitality industry.</li> <li>Strong knowledge of building systems (HVAC, electrical, plumbing, etc.) and general maintenance skills.</li> <li>Familiarity with preventative maintenance programs and equipment.</li> <li>Excellent leadership and team management skills.</li> <li>Ability to troubleshoot and problem-solve under pressure.</li> <li>Strong organizational and communication skills.</li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Technical support hotline / helpdesk: </b>establish and run the Group's first structured post-sales technical support channel (phone, email, Odoo ticketing) — the single entry point for all four constituencies below.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Support to internal Installation teams: </b>act as second-line technical escalation for the 3 Installation teams on issues beyond Foreman-level troubleshooting — commissioning faults, controller programming, non-standard configurations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Support to Group Maintenance: </b>provide technical backup to Team Coordinators and Technicians on complex breakdown diagnostics.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Support to independent installers (complete elevators from Factory): </b>provide installation manuals, technical drawings, commissioning checklists and troubleshooting assistance to external installer companies purchasing complete units through the Factory Sales channel — coordinating with the Factory Sales Manager on technical (not commercial) queries.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Support to component customers (Store / Spare Parts channel): </b>provide wiring diagrams, controller parameterization/programming support, compatibility verification and troubleshooting for customers purchasing standalone components, particularly on new-generation onesb (UNIT Machine, UNIT Controller, UNIT Door Operator, UNIT Landing Mechanism).</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Technical documentation ownership: </b>build and maintain installation manuals, wiring diagrams, commissioning checklists and technical FAQs for both complete elevators and standalone components, with R&amp;D Manager and Factory Manager.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Field-to-design feedback loop: </b>channel recurring technical issues found in the field back to R&amp;D Manager (design), Quality Manager (defects) and Factory Manager (manufacturing) to drive product and process improvement.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Technical training: </b>design and deliver periodic technical training sessions for independent installers and component customers on commissioning and troubleshooting of Group products, reducing recurring support load over time.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>•&nbsp;&nbsp;&nbsp;&nbsp;Degree in Electrical, Mechanical or Mechatronic Engineering</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;6–8+ years in technical support, field service engineering, or product support; elevator, MEP or industrial-equipment sector strongly preferred</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Hands-on knowledge of elevator machines, control panels/controllers and door operators — able to read wiring diagrams and support controller parameterization</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Experience supporting external B2B customers (installers, dealers) is a strong advantage</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Arabic and English required — this role interfaces directly with field technicians and external installers</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Assistant Well Site Leader is responsible for providing clear leadership in every aspect of HSE protection, ensuring safe working practices are used. They assist the Well Site Leader in conducting well operations safely, in accordance with the approved well operations program, and in compliance with the applicable policies/standards/procedures and regulatory requirements within the allocated time/cost with optimal use of resources. They develop required training and on-the-job exposure to develop the skills needed to become a Well Site Leader. Organize and lead brief and debrief safety and operations meetings that are related to well operations. Lead daily planning meetings and discuss operations with customer representatives, contractors, PL and third-party supervisors. Attend daily planning call with supervisors from various parties. Update forecast and planned activity to anticipate resource requirements to meet well demands and provide optimum efficiency of services. Check that equipment and services comply with the contract. Manage proper inventory of tangibles such as, but not limited to, cement, barite, bits, as well as rental equipment, and coordinate with PL OP and third-party suppliers as needed. Prepare and ensure material and equipment requests are issued in a timely manner to avoid disruption of operation. Ensure that operations are conducted to prevent the risk of well control, stuck pipe, and any other project and operational risks. Prepare detailed procedures for specific operations (i.e., running casing, cementing, etc.), including technical and operational calculations as relevant to the well- or rig-site operations (e.g., casing volume.) Ensure compliance with Schlumberger policies and Integration PL standards, including standing orders. Manage and monitor operations communications to ensure stakeholders are kept informed and service providers possess information they need to perform their services. Prepare daily cost estimates based on goods consumed and services provided. Participate in operational performance improvements and program changes with the project team. Review operational problems and support job incidents, changes, incident response and recovery, including coordination with the individual PLs and key contractors. Ensure support to other functional processes and product lines with proper handoffs at key interfaces.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years .</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. <br>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Type: Full-time | Immediate Start</b></p><p><br></p><p><b>About Us</b></p><p><br></p><p>We are a premium cleaning company committed to delivering a superior standard of cleanliness for high-end residential homes and commercial spaces. Our team takes pride in the details — and our clients notice the difference.</p><p><br></p><p><b>What You'll Do</b></p><p><br></p><p>- Carry out thorough cleaning of residential and commercial properties to our premium standards</p><p>- Follow detailed cleaning checklists and service instructions for each assignment</p><p>- Handle cleaning equipment and eco-friendly products with care and responsibility</p><p>- Represent the company professionally when on client premises</p><p>- Work efficiently as part of a team, arriving punctually and completing tasks on schedule</p><p>- Report any issues or observations to the operations supervisor promptly</p><p><br></p><p><b>Preferred Nationalities</b></p><p><br></p><p>Applicants from the Philippines and Nepal are strongly encouraged to apply.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>- English proficiency required — spoken and written</p><p>- Prior cleaning experience preferred</p><p>- Flexible availability, including weekends</p><p>- Reliable, punctual, and detail-focused</p><p>- Able to follow instructions carefully and maintain consistent quality</p><p>- Comfortable working in high-end environments with professionalism and discretion</p><p>- Physically able to carry out cleaning duties for full shifts</p><p>- Valid identification and right to work</p><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including mechanical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform mechanical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for mechanical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, PDMS, Smart Plant, CAESAR II, PV Elite or similar).</p></li><li><p>Strong understanding of mechanical systems, codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 10years of experience in mechanical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based / Transferable Visa</p></li></ul><p><br></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Summary: Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School or Technical Degree</li><li>Preferably 1 year of working experience preferably in similar Oil and Gas industries.</li><li>Minimum age 20 years up to 27 years old.</li><li>Elementary level of English language.</li><li>Basic Mathematical skills adding, subtracting, dividing, multiplying .</li><li>Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</li><li>Frequent climbing (stairs, ladders).</li><li>Frequent lifting, pulling &amp; pushing as per Company procedure.</li><li>Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold.</li><li>Ability to work in day/night shifts.</li><li>As per ADES Training Matrix.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>A Drinking Water Production &amp; Bottling Factory is looking for an experienced Mechanical Technician / Machine Operator.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements:</p><p>* Experience in machine operation and maintenance.</p><p>* Ability to troubleshoot and repair mechanical faults.</p><p>* Good English communication skills.</p><p>* Factory or production line experience is preferred.</p><p>* Preference for candidates from the Philippines, Indonesia, or Sri Lanka.</p><p><br></p><p><br></p></div>