Equipment operator Jobs

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will supervise, perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply advanced technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Craftsman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic and advanced technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to acquire and maintain SCR task(s) for position, as required (MQ-9 Engine Run, Flex Borescope, etc.)</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li> <li>Provides training to lower-level Aircraft Mechanics.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of five years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of two years’ experience on MQ-9 aircraft, as aircraft mechanic.</li> <li>Must have advanced knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Electrical Maintenance Manager - Residential for our client in Kuwait. Position Overview: The Electrical Maintenance Manager is responsible for planning, directing, and managing all electrical maintenance activities for a fleet of onshore drilling rigs and associated equipment. Key Responsibilities: Maintenance Management: Develop, implement, and continuously improve preventive, predictive, and corrective electrical maintenance programs for land drilling rigs. Ensure maximum reliability and availability of drilling electrical systems and associated equipment. Plan and supervise major electrical overhauls, rig upgrades, and refurbishment projects. Review equipment performance and implement reliability improvement initiatives. Monitor equipment failures and perform root cause failure analysis (RCFA) to eliminate recurring issues. Ensure maintenance activities comply with OEM recommendations and industry best practices. Fleet Support: Provide technical support to multiple onshore drilling rigs. Coordinate troubleshooting of complex electrical failures affecting drilling operations. Monitor rig electrical KPIs including equipment availability, MTBF, MTTR, and maintenance compliance. Conduct periodic inspections and audits of rig electrical systems. Standardize maintenance procedures across the drilling fleet. Equipments: Responsible for electrical maintenance of: SCR and AC/VFD drilling rigs, Rig power generation systems, Diesel generators, Motor Control Centers (MCC), Variable Frequency Drives (VFD), Silicon Controlled Rectifier (SCR) systems, Top Drive electrical systems, Drawworks electrical systems, Mud pump electrical systems, Rotary equipment, Air compressors, Lighting systems, Rig camp electrical distribution systems, High and low voltage distribution systems, UPS systems, PLC and control systems, Instrumentation interfaces, Emergency shutdown systems, Rig communication systems, Electrical protection systems. Planning &amp; Asset Management: Develop annual electrical maintenance plans and budgets. Manage spare parts inventory and critical electrical components. Coordinate procurement of electrical materials and services. Optimize maintenance costs while maintaining equipment reliability. Maintain accurate maintenance records using a Computerized Maintenance Management System (CMMS). Leadership: Lead, mentor, and supervise Electrical Superintendents, Electrical Supervisors, Electrical Engineers, and field electricians. Allocate manpower effectively across multiple drilling rigs. Conduct performance evaluations and competency assessments. Identify training needs and develop technical competency programs. HSE &amp; Compliance: Ensure compliance with company HSE policies and client requirements. Promote a strong electrical safety culture. Ensure compliance with: Lock Out/Tag Out (LOTO) Electrical isolation procedures Permit to Work (PTW) Hazard identification and risk assessment Safe electrical work practices Participate in incident investigations and implement corrective actions. Ensure compliance with applicable electrical codes and standards. Quality &amp; Continuous Improvement: Develop and update electrical maintenance procedures. Conduct reliability analysis and continuous improvement initiatives. Evaluate new technologies to improve drilling equipment reliability. Support rig commissioning, acceptance testing, and startup activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications:</b></p><p>Bachelor's Degree in Electrical Engineering or equivalent. Professional certifications in electrical engineering or maintenance management are advantageous. Experience of 8+ years of electrical maintenance experience in the oil and gas drilling industry with minimum 5 years in a managerial or superintendent-level position. Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred. Experience managing electrical maintenance across multiple drilling rigs. Strong knowledge of AC and SCR drilling rig electrical systems. Experience working in GCC/Middle East drilling operations is highly desirable.</p><p></p></section>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><p>An Associate s degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field. Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards. I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years. Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems. Must have an Active Secret US Government Clearance. US Citizenship is required to obtain a Secret Clearance.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>You will be responsible for all the electronic equipment maintenance as instructed by General Mechanical Supervisor while adhering to Hotel policies and procedures, whereby your role will include key responsibilities such as:</span></span></p><br><p><span><span><strong>Responsibilities</strong></span></span></p><br><p><span><span>· Performs tasks such as replacing components and wiring circuits, repairing complex electronic equipment, and taking test readings using common instruments such as digital multimeters, signal generators, semiconductor testers, curve tracers, oscilloscopes.</span></span></p><br><p><span><span>· Perform preventive maintenance and completes the turn-over quickly and efficiently in order to satisfy and meet the Guest needs.</span></span></p><br><p><span><span>· Respond to breakdowns of equipment’s and being available in case of emergency and applying the appropriate action as per Hotel policy and standards.</span></span></p><br><p><span><span>· Operate in a safe and environment friendly way to protect guests’ and colleagues’ health and safety, as well as protect and conserve the environment.</span></span></p><br><p><span><span>· Comply with the hotel environmental, health and safety policies and procedures.</span></span></p><br><br><b>Qualifications:</b><br><p><span><span>· Electronic Technician Certificate</span></span></p><br><p><span><span>· Diploma or two years of vocational training in Electronic engineering</span></span></p><br><p><span><span>· Minimum two years’ work experience as Electronic technician in a hotel or in a large building/complex with central plant</span></span></p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Lead Civil Supervisor oversees and manages the construction process, ensuring that projects are completed on time, within budget, and to the required quality standards. They coordinate and direct the activities of workers, subcontractors, and suppliers, and are responsible for ensuring compliance with safety regulations, building codes, and project specifications.</p><p>Key Indicators:</p><ul><li><p>Construction schedule adherence</p></li><li><p>Variation Orders management</p></li><li><p>Respect of HSE rules minimizing work injuries</p></li><li><p>Construction Quality NCs</p><p><strong>Other Responsibilities</strong></p></li><li><p>Oversee and manage the construction process, including coordinating and directing workers, subcontractors, and suppliers</p></li><li><p>Enforce safety regulations and building codes, and conduct regular inspections to identify potential hazards or violations</p></li><li><p>Manage and resolve conflicts between parties involved in their discipline</p></li><li><p>Maintain accurate records of progress, costs, and quality control measures</p></li><li><p>Identify and address any issues or problems that arise during the construction process</p></li><li><p>Manage the allocation of resources, including labor, materials, and equipment</p></li><li><p>Ensure all works are carried out in accordance with approved plans, specifications, and permit</p></li><li><p>Write Permit to Work, ensuring that all the hazards &amp; controls/precautions are explained to and understood by the affected operators. Approve Isolation Request &amp; Validation and LOTO procedures.</p></li><li><p>Ensure safe working practices and civil Safety Rules are followed by operators on site.</p><p><strong>Administrative tasks</strong></p></li><li><p>Interface with the Client civil counterpart and with the site Manager as required, promptly identifying areas of concern that may affect progress/quality/cost etc., recommending corrective actions as required.</p></li><li><p>Take part in daily meetings to report and forecast activities. Liaise with other Construction lead Supervisors</p></li><li><p>Provide sound technical advice and solutions to a diversity of technical problems within the discipline.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Holds a bachelor's degree in civil engineering</p></li><li><p>10+ years Industry experience</p></li><li><p>Prior Construction work experience, at least 06 years and additional experience in EPCC Projects that involve Engineering / Vendor management</p></li><li><p>Proven work experience as a lead piping supervisor.</p></li><li><p>Familiarity with state and safety codes.</p></li><li><p>Main experience in Oil &amp; Gas project</p></li><li><p>Strong leadership and managerial skills</p></li><li><p>Must have a basic knowledge of other disciplines: electrical, mechanical, instrumentation etc.</p></li><li><p>Kuwait based/ transferable Visa/ Valid driving license </p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p>Perform preventive, predictive, and corrective maintenance on PLCs, HMIs, SCADA systems, industrial control systems, instrumentation, and automation equipment to ensure maximum system reliability</p><p>Monitor the performance of PLC-controlled production lines, automation systems, and field devices, identifying abnormalities, and implementing corrective actions to maximize equipment availability, reliability, and operational efficiency.</p><p>Diagnose and troubleshoot faults in PLC programs, HMIs, VFDs, servo systems, sensors, actuators, control panels, electrical systems, and industrial communication networks.</p><p>Configure, troubleshoot, maintain, and optimize Variable Frequency Drives (VFDs) and motor control systems, including Danfoss, Siemens, Schneider Electric.</p><p>Conduct routine inspections, functional testing, and preventive maintenance of electrical, instrumentation, and automation equipment to ensure safe, reliable, and efficient operation.</p><p>Support the installation, commissioning, modification, and upgrading of PLC, HMI, SCADA, electrical control panels, instrumentation, and automation systems, ensuring proper testing, and validation.</p><p>Maintain accurate and up-to-date maintenance records, calibration certificates, troubleshooting reports, PLC/HMI program backups, and technical documentation.</p><p>Report shortages of automation spare parts, electrical components, instrumentation devices, and critical maintenance materials to the supervisor</p><p>Analyze recurring equipment failures, identify root causes, and recommend corrective actions and continuous improvement initiatives to enhance automation system reliability and efficiency.</p><p>Collaborate with production, maintenance, engineering, and quality teams to implement process improvements, reduce equipment downtime, improve Overall Equipment Effectiveness (OEE), and support continuous operational excellence.</p><p>Ensure all maintenance, installation, and modification activities comply with company procedures, ISO standards, GMP requirements (where applicable), and applicable electrical and automation regulations.</p><p>&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><p><br></p><p>Qualifications and language:</p><p><br></p><p>Minimum 2 years of experience in the same field – preferable in food production factory.</p><p><br></p><p>Minimum Technical Diploma in Electrical, Electronic, Mechatronic Engineering or Automation Technology.</p><p><br></p><p>English languages (verbal, written). Proficiency in Arabic is a plus.</p><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking Rig Electricians for deep drilling onshore rigs for our client in Kuwait. Key Responsibilities: Install new electrical equipment and systems as required, ensuring that installations are done in accordance with technical specifications and safety regulations. Run electrical wiring and conduit, install circuit breakers, panels, and other electrical infrastructure as needed. Test new installations to ensure proper operation and safety. Perform electrical maintenance and repairs on various equipment and systems. Conduct regular inspections to identify potential issues and develop preventative maintenance plans. Troubleshoot electrical problems and implement effective solutions. Collaborate with other departments to ensure electrical systems are integrated seamlessly. Maintain accurate records of electrical work and inspections. Comply with safety regulations and promote a culture of safety among the team. Respond to electrical emergencies, such as power outages or equipment failures, and take appropriate action to restore power and ensure safety. Participate in emergency drills and ensure readiness to address electrical issues in emergency situations. Stay up-to-date with industry trends and technological advancements. Maintain an adequate supply of parts for emergency repairs. Monitor the operational performance of the Company's equipment. Identify areas for improvement.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent and additional relevant electrical certifications or licenses.</li><li>Experience of 3+years as an Electrician in deep drilling land rigs is required.</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li><li>Strong knowledge of electrical systems, wiring, and equipment used in industrial or oil and gas settings.</li><li>Proficiency in diagnosing and repairing electrical issues.</li><li>Ability to read and interpret electrical schematics and diagrams.</li><li>Knowledge of safety regulations and best practices.</li><li>Ability to work in a fast-paced environment and handle multiple tasks.</li><li>Strong communication and interpersonal skills.</li><li>Willingness to work in various weather conditions and environments.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a skilled Asphalt Plant Mechanic to carry out maintenance, repair, and troubleshooting works for asphalt plant equipment and related machinery. The candidate will be responsible for ensuring that the plant operates efficiently with minimum downtime by performing preventive and corrective maintenance.</p><p>Key Responsibilities</p><ul><li>Perform mechanical maintenance and repair works for asphalt plant equipment.</li><li>Inspect and maintain conveyors, belts, rollers, gearboxes, motors, bearings, elevators, screens, dryer drum, burner components, pumps, valves, and bitumen lines.</li><li>Troubleshoot mechanical breakdowns and carry out urgent repairs to reduce production downtime.</li><li>Perform preventive maintenance according to the maintenance schedule.</li><li>Replace damaged or worn-out parts and ensure proper alignment and fitting.</li><li>Coordinate with the plant operator and maintenance supervisor regarding plant issues.</li><li>Maintain tools, equipment, and spare parts in good condition.</li><li>Assist in plant startup, shutdown, and inspection activities.</li><li>Follow safety procedures during maintenance works, especially lockout/tagout and hot work activities.</li><li>Keep maintenance records and report required spare parts.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Previous experience as a mechanic in an asphalt plant, crusher plant, batching plant, or similar industrial plant is required.</p><p>Strong knowledge of mechanical systems, conveyors, bearings, gearboxes, pumps, belts, and industrial equipment.</p><p>Ability to troubleshoot mechanical faults quickly and safely.</p><p>Basic welding, cutting, and fabrication skills are preferred.</p><p>Ability to read basic mechanical drawings and understand equipment manuals.</p><p>Good practical knowledge of preventive maintenance.</p><p>Ability to work under pressure during plant breakdowns.</p><p>Good teamwork and communication skills.</p><p>Commitment to safety rules and proper use of tools and PPE.</p><p>Previous experience in Kuwait or GCC is preferred.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Master HVAC Technician - TS/SCI Job Category: Engineering and Technical Support Time Type: Full time Minimum Clearance Required to Start: TS/SCI Employee Type: Regular-Long Term Assignment Percentage of Travel Required: Up to 10% Type of Travel: Outside Continental US * * * The Opportunity: CACI is seeking a Master HVAC Technician to support our program in support to our mission critical client in Kuwait. As the selected candidate, you will perform inspections on HVAC systems and components (e.g. heating units, building exhaust fans, ventilation units, etc.) to evaluate condition, identify necessary repairs and recommend or perform preventive maintenance. Cleans, lubricates, and repacks the working parts of the system. Responsibilities: Tracks performance of routine and preventative maintenance to ensure availability of HVAC systems and troubleshoot HVAC/R systems with complex problems and extensive repairs requiring judgement to locate malfunctions. Respond to service calls and preventive maintenance inspections and produce reports in writing through computerized maintenance management system (CMMS) regarding malfunctioning/inoperable equipment. Responds to emergency situations during and after hours to resolve issues. Diagnoses causes of problems and/or failures in HVAC systems for the purpose of identifying equipment and/or systems repair and/or replacement needs. Install, repair, and maintain large commercial and industrial ventilation, refrigeration, air conditioning (AC), and cooling systems with complex problems and extensive repairs. Independently perform recurring work on exhaust fans, boilers, air handlers, pump, motors, air dryers, and other related HVAC equipment but not limited to HVAC control and monitoring systems. Installs, modifies, overhauls, repairs, and maintains a variety of complex HVAC equipment air conditioning, air handlers, pumps, motors, valves, heating systems, and associated auxiliary and control equipment. Works with engineering or scientific personnel to discuss plans, modifications, and user needs. Reviews available plans, specifications, or drawings; determines the size, shape, and location of equipment. Performs design, modification, maintenance and repair of critical environmental and energy support systems and associated highly sensitive state-of-the-art computerized controls and air quality monitoring systems located within US-Only areas of Intelligence and Security Command (INSCOM) Sensitive Compartmented Information Facilities (SCIFs). Provides critical advanced technical knowledge in support of unique security requirements inherent in Intelligence and Security Command (INSCOM) Sensitive Compartmented Information Facilities (SCIFs)operations including sound baffling techniques/equipment and the resolution of compromising electrical currents, as sustainment of high system availability rates. Produces classified technical documentation outlining in depth technical findings and recommendations. Provides design, emergency non-routine fault isolation of smoke removal systems, fire detection/suppression equipment used exclusively in critical, highly sensitive Military Forces installations. Performs system and subsystem diagnostics and scheduling and maintaining complex electronic environmental systems, calibration, and lubrication of unique components and controls that are used to provide and monitor precise environmental conditions within SCIFs housing unique military intelligence equipment, scientific devices, and technologies. Performs periodic, worldwide deployments in strategic and tactical mobile facility environments. Provides expert technical assistance for a 24-hour operational environment with limited documentation resources. Responds to off-duty (evening and weekend) calls to support critical system outages and to provide rapid fault isolation and resolution concerning environmental factors affecting ISR system performance to include developing technical documentation for ISR support system layouts. Supports US Army systems on site whenever and wherever deployed. Available to deploy to other countries and/or theaters to perform quick reaction technical support to US forces worldwide military contingency missions and requirements in potentially hazardous work environments. What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you ll be part of a high-performing group dedicated to our customer s missions and driven by a higher purpose to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground in your career and in our legacy. Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. The proposed salary range for this position is: $51,800-$106,200 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree and three years of experience College, Vocational School, or High School diploma or equivalent and a combination of 10 years education and experience with a valid Master HVAC license, or equivalent, at a State level; or 12 years experience in an equivalent Military HVAC training/certification. Specific experience in fault isolation and resolution of tactical and strategic environmental systems and their sophisticated electronic support systems. Ability to plan, install, troubleshoot and repair equipment and systems not fully covered by technical manuals, schematics, etc. 4 years experience with HVAC control and monitoring systems and their components. Experience with computerized maintenance management systems (CMMS). Expert level experience in design, installation and sustainment of computer controlled environmental systems in mobile secure facilities. Required to meet US Government accepted and industry standards criteria for technically complex computer environmental systems, uninterrupted power distribution systems, and power control equipment. Possess a North American Technician Excellence (NATE) certification. Able to maneuver in small spaces and lift up to 50lbs. US Citizen. Active TS/SCI clearance REQUIRED.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>ZAIN2400 - Network Assurance • Operation Zain Kuwait • Division Finance • Location Kuwait - Kuwait City • Closing Date 30-Jul-2026</p><p>About the Role</p><p>The Network Assurance Analyst is responsible for reviewing the operator s network elements and operational systems and the implementation of controls to detect/prevent/mitigate errors affecting potential or generated revenue.</p><p>Responsibility:</p><ul><li>Identify "risk", operational and financial impacts relating to systems and network elements and facilitate the implementation of required controls to mitigate identified risks.</li><li>Troubleshoot revenue programs and billing system parameters for accurate and proper billing set up and price rating accuracy.</li><li>Carry out revenue assurance activities for revenue streams monitoring and follow up alarms raising by RA system and other controls assurance activities.</li><li>Asses implemented controls for efficiency and effectiveness and develop and monitor KPIs for difference core areas of revenue streams</li><li>Conduct review of revenue booking and conduct analysis of revenue and other important trends</li><li>Participate in cross-functional teams to resolve revenue assurance and network assurance issues and develop/implement the necessary controls.</li><li>Maintain Revenue Assurance department systems, system upgrades, software upgrades and hardware implementation.</li><li>Engage in Zain s general network projects and assess the impact of such project on RA functions and end customers.</li><li>Perform acceptance testing for the new developed RA adapter, new software/application release or upgrades to ensure functionality and adherence to Zain's standards.</li><li>Work with vendors to implement, maintain and enhance revenue assurance initiatives throughout the business.</li><li>Assure the integrity of RA system s data and maintain the accuracy of the system s reference data.</li><li>Monitor the daily performance and usage trends generated by the revenue assurance tool.</li><li>Perform cross-systems validation to assure systems synergy.</li><li>Create, maintain, and enhance best practice standards in written evidence, analytical charts, and written reports/presentations.</li><li>Document the department s existing workflows and processes</li><li>Perform all the above-mentioned roles and responsibilities in compliance to the Information Security Management System (ISMS) policies and report any information/physical security breaches or incidents to the supervisor/manager immediately</li><li>Be aware of, and adhere to, all environmental requirements as set by the statutory bodies in Kuwait, or by the published policies of Zain Group/Kuwait</li><li>Zain abides by fulfilling the occupational health and safety certificate requirements that establishes and maintains an OH&amp;S management system that eliminate hazards and minimizes OH&amp;S risks (including system deficiencies), take advantage of OH&amp;S opportunities and addresses OH&amp;S management system nonconformities associated with its activitie</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Skills:</h2><ul><li>Ability to communicate, present and influence all levels of the organization</li><li>Expertise in revenue assurance systems</li><li>Excellent understanding of network elements and their assurance within the telecom sector</li><li>Understanding of modelling, financial accounting and reporting</li><li>Ability to run deep dive analyses</li><li>Experience with data mining, analytics, dashboards and problem structuring</li><li>Understanding of SQL to query and manipulate large data sets for analysis</li><li>Advanced MS Office skills (Excel, Word, PowerPoint, etc.)</li><li>Clear ability to understand the dynamics of financial data to extract relevant information</li><li>Excellent written and verbal communication skills</li><li>Ability to analyze a situation and produce creative, original and useful solutions</li><li>Understanding of designing KPIs, reports, dashboards</li><li>Strong understanding of telecommunications products, trends and technology markets</li></ul><h2>Education Level &amp; Major:</h2><p>Bachelor s degree in computer engineering, Information Technology, Management Information Systems, or a related field</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> <br> <br> <br> <br> Summary:<br>The CCTV Operator is responsible for operating and monitoring Security Electronic Control Systems within the Control Center to ensure the security and safety of the premises.<br><br>Job Responsibility:<br>- Operate and monitor CCTV cameras and equipment within the Control Center.<br>- Ensure the honesty, accuracy, and confidentiality of all information gathered.<br>- Adhere to company security standards and protocols.<br>- Preserve the rights of individuals in accordance with privacy regulations.<br><br><br><br> <br> <br> <br> <br> <br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Candidate Requirements:<br>- At least 3 years of experience in operating CCTV systems.<br>- Diploma or higher degree in a related field.<br>- Residency in Kuwait with a transferable Article 18.<br>- Full-time employment availability</p></div>

<p><h4>Job Description</h4> <p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and be responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <p>This role requires the candidate to obtain Disclosure and Barring Service (DBS) check through UK Government prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM Medical for deployment.</p> <h4>Knowledge & Skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</p> <p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p> <p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</p> <p>Working knowledge of technical publications and logistics information systems.</p> <p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</p> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical Requirements / Working Environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</p> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> <p>Will handle dirty parts and lubricants.</p> <p>Will be required to wear proper personal protective equipment (PPE).</p> <p>Must be able to pass a respirator physical and fit test qualification.</p> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> <p>May work in maintenance shop or outside.</p> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> <p>May be exposed to extreme noise from operating equipment.</p> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p><p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Graduation from a standard four (4) year high school or equivalent (GED)</p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Open the bakery early in the morning</li><li>Clean kitchen equipment and tools before use</li><li>Weigh flour and other ingredients to prepare dough</li><li>Bake different bread types, like pretzels, baguettes and multigrain breads</li><li>Adjust oven temperatures to ensure proper baking</li><li>Shape dough to prepare different types of pastries, including croissants, cookies and sweet rolls</li><li>Prepare custom-made pastries based on customers’ preferences </li><li>Recommend recipes to renew our menu and attract more customers (e.g. gluten-free or vegan desserts)</li><li>Track food supplies and place orders, as needed</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>xperience as a Baker, Pastry Chef or similar role</li><li>Familiarity with all professional kitchen equipment, including mixers, blenders and dough sheeters</li><li>Understanding of food safety practicesExperience with cake decoration techniques</li><li>Excellent time-management skills</li><li>Ability to remain calm and focused in a fast-paced environmentTeam spirit, with a customer-focused attitude</li><li>Flexibility to work in early morning shifts</li><li>Certification from a culinary school is a plus</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Reports all equipment malfunctions to proper personnel. </p><p>Removes and cleans all reusable equipment, disposes all used items according to infection control policy</p><p>Maintains appropriate inventory of supplies and equipment, orders supplies as required. </p><p>Assist the anesthesiologist during specific procedures like tracheal intubation, tracheal suction , transport to operating room and post-anesthesia care unit (PACU), blood warming procedures etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>a) Pass in the higher secondary certificate after 12 years of school</p><p>b) Specialty training for 2 years and certification, which will enable him to work as anesthesia technician in his/ her native country.</p><p>c) 4 years’ work experience after the above certification.</p><p>d) Age must not exceed 40 years</p><p>e) MOH License</p><p>f) Quadrabay Report</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provides direction in the accomplishment of the maintenance and repair of systems associated with fire detection, suppression and other equipment that is a component part of the overall fire protection system</p> <ul> <li>Performs inspection, testing and maintenance of fire protection systems IAW UFC 3-601-02 using NFPA 72 and NFPA 25 as guidelines, as well as other model building codes as directed.</li> <li>Utilizes test equipment and meters such as voltmeters, ammeters, telephone test sets, smoke detector sensitivity testers, and wire tracing equipment, and others for locating and diagnosing equipment, distribution, and control system malfunctions.</li> <li>Utilizes computer software to program fire alarm control panels and perform load calculations for installed systems</li> <li>Utilizes various hand tools, shop tools, and equipment in accomplishing repairs and maintenance of these systems and components.</li> <li>Troubleshoots and repairs fire protection circuits and equipment. Repairs or replaces defective components.</li> <li>Requests and maintains accountability for parts, tools, equipment and materials required for work performance and work assignments.</li> <li>May be required to conduct both routine and emergency services after normal work periods.</li> <li>Performs the majority of work in the sensitive and secure areas of military installations and facilities in accordance with the established security procedures of the U.S. Army and contract requirements</li> <li>Responsible for safe operation, cleanliness and operator maintenance of assigned vehicle.</li> <li>Prepares and completes requires work documents.</li> <li>Complies with safety/environmental standards and safe work practices</li> <li>Acts as Subject Matter Expert for the AOR fire alarm/suppression systems</li> <li>Provides recommendations to the US Government for the need for new systems and repairs.</li> <li>Performs other duties as assigned</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Minimum Qualifications:</strong> </p><ul> <li>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required.</li> <li>Qualifications have to meet the criteria as outlined in UFC 3-601-02. Recognized journeyman or craftsman-level qualification for fire alarm systems. Examples include, but are not limited to, certification in Fire Alarms (NICET level III, Water Suppression (NICET Level III), and Special Hazards Suppression Systems (NICET Level III), formalized labor organization-based journeyman training, valid current qualification of license from any state, and factory training.</li> <li>Associates degree and two years experience or High School Diploma and six years experience that can be documented. Examples include: previous job descriptions, DD214 and Military/Civilian Performance reports, job experience letter on company or corporate letterhead from previous employers.</li> <li>A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required.</li> <li>Must be CAC eligible and/or able to obtain a Common Access Card (CAC)</li> <li>Must be a U.S. Citizen</li> </ul> <strong>Experience</strong>:<br> <ul> <li>A minimum of 5 years of fire detection and signaling systems experience, which MUST include: At least 33 months of fire alarm systems experience, including installation, maintenance, inspection, testing, commissioning, technical system estimating and sales, plan preparation, code compliance review, project management, and/or technical business management.</li> <li>Must be able to provide and evaluate documents detailing deficiencies and corrective action.</li> <li>References and previous employers contact information must be provided for verification purposes.</li> <li>May be required to formulate project timelines.</li> </ul> <strong>Skills:</strong> <ul> <li>Must have the ability to evaluate fire detection/suppression installations to determine corrective action.</li> <li>Must have sufficient knowledge of English to understand technical instructions and documents and accomplish work from these documents. MIRCOM PRO 2000, VESDA, and Chemetron Suppression Systems factory training desired (or equivalent).</li> <li>Excellent organization and communications skills, both written and verbal, are required.</li> <li>Must be computer literate in all aspects of Microsoft Office .</li> </ul> <strong>Supervisory Responsibilities:</strong> <ul> <li>Supervises a section of 11 technicians including required reporting and submission of inspection reports and required contract documentation.</li> </ul> <strong>Working Conditions:</strong> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> <strong>Physical Requirements:</strong> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li> <li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li> <li>Must comply with all Fire and Safety Regulations and post policies.</li> </ul><p></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br> <br> <strong>Job Purpose</strong> <br> <br> Carry out and follow up on food and beverage service tasks, ensure that the restaurant staff is ready to meet various requests, and receive customer orders and serve them efficiently.<br> <br> <strong>In this role, you will be responsible for key performance areas and responsibilities, including but not limited to the following:</strong> <br> <br> <ul> <li> Setting tables at the beginning of each meal, placing a sufficient number of dinnerware and hospitality drinks on the self-service buffet, and maintaining ease of movement in the dining hall.</li> <li> Ensuring that party equipment is received, ready, clean, and matches the quantities supplied from the warehouse.</li> <li> Receiving and fulfilling customer orders.</li> <li> Continuously cleaning tables after meals and ensuring general hygiene in accordance with company procedures.</li> <li> Fully familiar with the menu to answer any guest inquiries.</li> <li> Knowledge and experience in implementing HACCP standards.</li> <li> Maintaining a high degree of cleanliness and orderliness to reflect the company's image, while adhering to health regulations.</li> <li> Coordinating with kitchen staff to ensure smooth operations and customer satisfaction.</li> <li> Supervising and coordinating with kitchen and warehouse managers in receiving equipment and menus.</li> <li> Greeting and greeting guests and presenting menus.</li> <li> Assisting those responsible for cleaning up after the party in collecting tools and maintaining the party equipment until it is returned to the warehouse.</li> <li> Performing any tasks assigned within the limits of functional management duties and responsibilities.</li> <li> Commitment to implementing company policies, administrative circulars, and administrative decisions.</li> </ul> <br> <strong>To be considered for this role, you must meet the following requirements:</strong> <br> <br> <strong>Job Requirements:</strong> <br> <ul> <li> Educational Qualification: High School</li> <li> Experience: One year of experience </li> </ul> <strong>Additional Requirements:</strong> <br> <ul> <li> The ability to implement and follow up on food and beverage service tasks.</li> <li> The ability to ensure that the restaurant staff is ready to meet various requests, receive customer orders, and serve them efficiently.</li> <li> Proficiency in spoken and written Arabic and English.</li> </ul></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series. Responsibilities Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: · Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. · Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. · Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. · Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. · Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. · Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. · Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. · Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. · Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Archirodon, having earned its reputation as a reliable and respected international contractor for more than a half century in the Engineering, Procurement and Construction (EPC) market, continues to create value to its stakeholders by executing complex EPC projects worldwide, in recognition of its superior standards of performance. &nbsp;</p><br><p>We are constantly growing and are currently looking for a full of potential and reliable <strong>Electrical Procurement Engineer (I &amp; C)</strong>&nbsp;to join our top qualified and knowledgeable team in one of our projects in Kuwait and electrical equipment and systems for project reliability and compliance, ensuring&nbsp;compatibility of electrical systems in hazardous environments.</p><br><br>Job Description<br><ul><li>Source electrical equipment including emergency diesel generators, MV/LV transformers, MV switchgear and modifications woks, package substations, UPS systems, explosion-proof distribution boards, lighting fixtures, poles, local control stations, MOV isolating switches, HV/LV power/control cables, cable glands, earthing materials, and cable trays.</li><li>Procure instrumentation/telecom equipment including control systems (PCS, ESD, FGS), telecom systems, motor-operated valves, ESD valves, pressure/temperature/level transmitters, Coriolis flowmeters, gauges, F&amp;G devices, auto sampling systems, I&amp;C cables, fiber optic cables, junction boxes, cable trays, glands, and tubes/fittings.</li><li>Ensure compliance with electrical standards.</li><li>Ensure compliance with instrumentation/telecom standards.</li><li>Negotiate with suppliers the cost-effective electrical equipment.</li><li>Negotiate with suppliers the cost-effective instrumentation / telecom / F&amp;G equipment.</li><li>Collaborate with engineering teams for material compliance.</li><li>Collaborate with engineering teams for material compliance.</li><li>Close coordination with Post order team (Expediting Team) for Vendor deliverables</li><li>Close coordination with Post order team (Expediting Team) for Vendor deliverables.</li><li>Negotiate with suppliers for high-precision equipment.</li></ul><br>Qualifications<br><ul><li><strong>BSc in Electrical &nbsp;</strong><strong>Instrumentation, or Telecom Engineering</strong>.<br> Preference for graduates from recognized accredited universities or institutions in automation/control programs</li><li>Knowledge of electrical systems (e.g., transformers, switchgear),&nbsp;of instrumentation/control systems, telecom equipment, and procurement, and safety standards.</li><li>Oil &amp; gas I&amp;C experience, UAE/Kuwait standards.gas electrical systems experience, UAE/Kuwait standards.</li><li>&nbsp;Enhances SCM team with electrical and I &amp; C expertise.</li><li>3–5 years of design and engineering experience in electrical systems as well as instrumentation and control prior to procurement role.</li><li>Procurement experience in oil &amp; gas and marine projects.</li></ul><br>Additional Information<br><p>You are someone who:</p><br><ul><li>Demonstrates strong analytical, detail-oriented, strong negotiation skills.</li><li>Has a result-driven and decisive personality</li><li>Demonstrates&nbsp;attention to detail</li><li>Enjoys challenge, working with different cultures and travelling</li></ul><p><u><strong>What's in it for you:</strong></u><br> Expat package is on the shelf, yet the real joy comes from being a member of smart and passionate teams, within an international leading EPC Group on a mission that matters. We create mega construction projects - literally around the globe - with meaningful impact on the local communities for the years to come. At Archirodon, you will find a proud, productive and human-centric culture, caring for and building on our people and their development!</p><br><p><em>Please note that you will be contacted only in case you are shortlisted for an interview. In the meantime, do not hesitate to stay in touch and keep monitoring our open vacancies and our LinkedIn page! Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out.</em></p><br><p><em>Rest assured that your application will be treated with strict confidentiality and under all applicable data privacy regulations.</em></p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Aviation Life Support Equipment (ALSE) Technician serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices. Principal Accountabilities Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications. Inspects, instructs, services and certifies individual and crew equipment Order, receive and inventory kits and components Resolve shipping discrepancies Ensure proper fit of crew member clothing Maintain ALSE and NVD for DoS and DI personnel Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment Perform other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma or equivalent is required.</li><li>One (1) year verifiable experience as an ALSE technician.</li><li>Must possess a certificate of training as a school trained ALSE Technician.</li><li>Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.</li><li>Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.</li></ul><p>Knowledge &amp; Skills</p><ul><li>CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred)</li><li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation</li><li>Must be able to ascertain LSE requirements for a multi-type aircraft environment</li><li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures</li><li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures</li><li>Must have knowledge of aviation maintenance data systems and associated documentation/forms</li><li>Must have knowledge of life support equipment maintenance tools and tool control procedures</li><li>Must knowledgeable of principles of instruction</li><li>Must have knowledge of seat kit survival components</li><li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance</li><li>The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment</li><li>Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day</li><li>Must be able to climb stairs, ramps, and ladders and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to carry, push or pull up to 50 pounds</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet</li><li>Must be able to communicate by voice and detect sounds</li><li>Must be able to distinguish color and judge three dimensional depths</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet</li><li>Be able to travel to and between remote location(s)</li><li>Travel to austere or inhospitable high stress environments may be required</li><li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required</li><li>May be exposed to extreme noise from turbine and jet engine aircraft</li><li>May be exposed to fumes or airborne particles</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft</li><li>Will be exposed to surface obstructions (ladders, stairs, etc)</li><li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li></ul><p></p></section>