Electrical Drafts Man Jobs in Kuwait

<p>Job Purpose The Data Center Mechanical Engineer owns the mechanical and cooling infrastructure of the data center at engineering level, from the central cooling plant through to the data hall cooling environment. The role is responsible for mechanical maintenance strategy, system reliability, operational procedures, environmental performance, vendor management, safety compliance, spare-parts planning, and emergency response. The Mechanical Engineer directs the Mechanical Manning Technicians, authorizes equipment changeovers and critical maintenance activities, approves mechanical procedures, and acts as the mechanical technical authority during incidents and operational escalations.</p><p>Key Responsibilities and Areas of Ownership</p><ul><li>Take engineering ownership of the data center mechanical and cooling infrastructure, including chillers, cooling towers, chilled-water pumps, condenser-water pumps, heat exchangers, CRAH units, CRAC units, AHUs, ventilation systems, fans, filters, coils, valves, actuators, piping systems, and associated controls.</li><li>Manage the operation, reliability, and performance of chilled-water and precision-cooling systems serving the data halls and supporting areas.</li><li>Own mechanical equipment operating procedures, changeover procedures, start-up and shutdown sequences, and equipment rotation plans.</li><li>Authorize, lead, and supervise critical mechanical activities, including chiller changeovers, pump changeovers, cooling-tower changeovers, isolation activities, system draining, system filling, and restoration of equipment to service.</li><li>Monitor and maintain data hall environmental conditions, including temperature, humidity, airflow, differential pressure, cooling capacity, and equipment loading.</li><li>Review chilled-water supply and return temperatures, water flow, system pressure, differential pressure, valve positions, and system delta-T to identify performance issues and operational risks.</li><li>Manage cooling redundancy and capacity to ensure sufficient cooling remains available during maintenance, equipment failure, testing, or abnormal operating conditions.</li><li>Own the mechanical safety program, including Lockout/Tagout, Permit to Work, risk assessments, safe isolation, refrigerant safety, chemical-handling controls, and compliance with HSE requirements.</li><li>Develop and manage the annual mechanical Planned Preventive Maintenance program in accordance with OEM recommendations, equipment criticality, maintenance history, and operational requirements.</li><li>Prepare, review, approve, and maintain mechanical Standard Operating Procedures, Methods of Procedure, Emergency Operating Procedures, maintenance instructions, risk assessments, and equipment changeover procedures.</li><li>Ensure that all mechanical maintenance activities are planned around available cooling redundancy and executed without compromising data center availability.</li><li>Own vendor coordination for mechanical maintenance activities and supervise OEM major services, equipment overhauls, repairs, inspections, and specialist testing.</li><li>Review vendor method statements, risk assessments, service reports, test results, recommendations, and corrective-action requirements.</li><li>Manage critical spare-parts and inventory planning for chillers, pumps, cooling towers, CRAH and CRAC units, valves, actuators, sensors, filters, belts, bearings, motors, VFDs, and other mechanical systems.</li><li>Analyze cooling-system performance, equipment efficiency, energy consumption, operating trends, alarm history, temperature profiles, water-flow conditions, and equipment loading.</li><li>Identify and implement opportunities to improve cooling efficiency, airflow management, chilled-water performance, equipment sequencing, and overall energy performance without reducing system resilience.</li><li>Investigate mechanical faults, high-temperature conditions, leaks, abnormal vibration, low-flow conditions, low delta-T, equipment trips, control failures, and recurring alarms.</li><li>Lead root cause analysis for mechanical incidents and equipment failures and implement corrective and preventive actions.</li><li>Direct, develop, and train Mechanical Manning Technicians in operational procedures, inspections, first-line maintenance, alarm response, safe isolation, and incident escalation.</li><li>Review technician shift logs, inspection checklists, operating readings, alarm reports, and job-card closure records.</li><li>Support testing and commissioning activities, integrated systems testing, functional performance testing, equipment acceptance, redundancy verification, and operational-readiness activities.</li><li>Support predictive and condition-based maintenance programs, including vibration analysis, oil analysis, refrigerant checks, water and coolant sampling, thermal inspections, leak detection, and equipment-performance trending.</li><li>Manage liquid-cooling systems, Cooling Distribution Units, coolant loops, leak-detection systems, valves, pumps, and associated controls where installed.</li><li>Coordinate water-treatment activities, water-quality monitoring, chemical dosing, sampling, and corrective actions for chilled-water, condenser-water, and liquid-cooling systems where applicable.</li><li>Support WTP, STP, plumbing, drainage, and mechanical fire-protection systems where included within the data center operational scope.</li><li>Coordinate with electrical, BMS, IT, operations, HSE, vendors, and management teams during planned maintenance, incidents, testing, and emergency situations.</li><li>Maintain accurate mechanical documentation, asset records, maintenance reports, operating procedures, equipment histories, incident reports, testing records, and technical drawings.</li><li>Act as the mechanical technical authority during cooling incidents and operational escalations on a 24/7 on-call basis.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Engineer Level</li><li>Bachelor's degree in Mechanical Engineering.</li><li>Minimum of 5 years of mechanical, HVAC, cooling-plant, or critical-facility operations and maintenance experience.</li><li>At least 2 years of experience in a data center or another critical facility where loss of cooling could affect essential operations.</li><li>Demonstrated engineering-level experience with chilled-water systems, precision cooling, or critical HVAC systems.</li><li>Practical knowledge of chillers, pumps, cooling towers, heat exchangers, CRAH units, CRAC units, AHUs, valves, actuators, VFDs, and mechanical controls.</li><li>Experience in managing cooling redundancy, equipment capacity, environmental conditions, and critical maintenance activities in a live operational environment.</li><li>Demonstrated ownership of mechanical maintenance planning, technical procedure writing, incident response, vendor management, and spare-parts planning.</li><li>Experience preparing or approving SOPs, MOPs, EOPs, risk assessments, isolation plans, and maintenance procedures.</li><li>Ability to read and interpret P&amp;IDs, mechanical drawings, equipment schematics, sequence-of-operation documents, control diagrams, and OEM technical manuals.</li><li>Working knowledge of BMS or BAS platforms, mechanical alarms, equipment trends, sensors, control sequences, and environmental monitoring.</li><li>Good understanding of chilled-water temperatures, flow, pressure, differential pressure, delta-T, heat transfer, airflow, humidity, and cooling-capacity principles.</li><li>Experience with root cause analysis, corrective-action planning, and technical incident reporting.</li><li>Familiarity with testing, commissioning, integrated systems testing, and mechanical-system operational-readiness activities.</li><li>Fluent written and spoken English with strong technical reporting and communication skills.</li></ul><p>Other Requirements</p><ul><li>The role is fully on-site within an operational data center environment.</li><li>Availability for 24/7 on-call support is required.</li><li>The employee must be available to support planned shutdowns, emergency maintenance, testing activities, shift coverage, weekends, nights, and public holidays when operationally required.</li><li>The employee must comply with all company, client, data center, HSE, Permit to Work, LOTO, security, and access-control requirements.</li><li>The employee must be able to coordinate effectively with technicians, contractors, OEM vendors, operations teams, IT teams, and other engineering disciplines.</li></ul>

<p><h4>Job description</h4> <p>The Army Aviation GSE - Ground Support Equipment Mechanic diagnoses malfunctions and repairs ground support equipment.</p> <p>Three (3) years of aviation GSE experience in the last six (6) years. Actual and recent aviation-related experience in the repair, modification, maintenance, and overhaul of related equipment being serviced and their associated components (APUs, etc).</p> <p>Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.</p> <p>Uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, and document maintenance actions, and analyzes, diagnoses, and repairs GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools.</p> <p>Maintains external fuel and grounding systems.</p> <p>Performs scheduled and unscheduled maintenance on GSE - inspects, tests, and operates GSE to determine equipment serviceability and proper operation.</p> <p>Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air.</p> <p>Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</p> <p>Disassembles and assembles malfunctioning GSE accessories and components.</p> <p>Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories, stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</p> <p>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</p> <p>Maintains vehicle records.</p> <p>Maintains and updates paper and electronic equipment records.</p> <p>Provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations.</p> <p>Practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</p> <p>Performs other qualified duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent.</li> <li>U.S. military technical school or specialized training course is desired.</li> <li>Three (3) years of aviation GSE experience in the last six (6) years. Actual and recent aviation-related experience in the repair, modification, maintenance, and overhaul of related equipment being serviced and their associated components (APUs, etc).</li> <li>Valid U.S. passport required, and able to travel internationally with minimum 6 blank pages and two (2) plus years' validity on passport expiration date at the time of hiring.</li> <li>Must be able to obtain and maintain facility Public Trust NAC-I. Note: U.S. citizenship is required for facility Public Trust NAC-I at this work location.</li> <li>Able to pass CENTCOM medical requirements for deployment (attend CRC).</li> <li>Must be able to obtain a Kuwait visa.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of inspection, servicing, troubleshooting, and repair of ground support equipment.</li> <li>Knowledge of military publications (including electronic manuals), drawings, blueprints, microfilm, diagrams, and schematics is mandatory.</li> <li>Knowledge of military and/or company forms required by work assignments.</li> <li>Individual must be able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul> <h4>Compensation details</h4> <p>Not applicable.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance.</li> <li>Paid time off and holidays.</li> <li>Retirement benefits (including 401(k) matching).</li> <li>Educational reimbursement.</li> <li>Parental leave.</li> <li>Employee stock purchase plan.</li> <li>Tax-saving options.</li> <li>Disability and life insurance.</li> <li>Pet insurance.</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 06/10/2026 - Until filled.</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>USAF equivalent position is Avionics Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li> <li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li> <li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from production staff, avionic leads, avionics/com technician IIIs, or avionics technician IIs.</li> <li>Uses common and complex test instruments in the performance of assigned duties.</li> <li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li> <li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li> <li>Must be able to work with limited supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft avionics and/or GCS maintenance experience required.</li> <li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li> <li>Must have basic knowledge of RFF systems, components, and accessories.</li> <li>Must possess general understanding of technical publications related to aircraft electronics maintenance.</li> <li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li> <li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li> <li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Current IAT Level II certification.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 experience as an avionics technician.</li> <li>Avionics technician experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Principal accountabilities</h4> <p>Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.<br> Inspects, instructs, services and certifies individual and crew equipment.<br> Order, receive and inventory kits and components.<br> Resolve shipping discrepancies.<br> Ensure proper fit of crew member clothing.<br> Maintain ALSE and NVD for DoS and DI personnel.<br> Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals.<br> Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment.<br> Perform other duties as assigned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required.<br> One (1) year verifiable experience as an ALSE technician.<br> Must possess a certificate of training as a school trained ALSE technician.<br> Valid US passport (minimum 2.5 years validity) required for deployment to Germany.<br> Ability to obtain and maintain a US government security clearance, NAC-I T1 public trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br> Must meet and be able to pass CENTCOM medical requirements prior to deployment.<br> Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait visa.</p> <h4>Knowledge & skills</h4> <ul> <li>CMF 92 supply & services MOS series or other military/commercial equivalent (92R MOS preferred).</li> <li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation.</li> <li>Must be able to ascertain LSE requirements for a multi-type aircraft environment.</li> <li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures.</li> <li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures.</li> <li>Must have knowledge of aviation maintenance data systems and associated documentation/forms.</li> <li>Must have knowledge of life support equipment maintenance tools and tool control procedures.</li> <li>Must be knowledgeable of principles of instruction.</li> <li>Must have knowledge of seat kit survival components.</li> <li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance.</li> <li>The ability to obtain and maintain a moderate risk public trust (MRPT) through Department of State background investigation is a condition of continued employment.</li> <li>Must possess or have the ability to obtain a U.S. passport before assignment, including renewal and additional pages if applicable.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day.</li> <li>Must be able to climb stairs, ramps, ladders and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push or pull up to 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>Must be able to communicate by voice and detect sounds.</li> <li>Must be able to distinguish color and judge three dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet.</li> <li>Be able to travel to and between remote location(s).</li> <li>Travel to austere or inhospitable high stress environments may be required.</li> <li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft.</li> <li>Will be exposed to surface obstructions (ladders, stairs, etc.).</li> <li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Aviation Life Support Equipment (ALSE) Technician serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices. Principal Accountabilities Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications. Inspects, instructs, services and certifies individual and crew equipment Order, receive and inventory kits and components Resolve shipping discrepancies Ensure proper fit of crew member clothing Maintain ALSE and NVD for DoS and DI personnel Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment Perform other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma or equivalent is required.</li><li>One (1) year verifiable experience as an ALSE technician.</li><li>Must possess a certificate of training as a school trained ALSE Technician.</li><li>Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.</li><li>Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.</li></ul><p>Knowledge &amp; Skills</p><ul><li>CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred)</li><li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation</li><li>Must be able to ascertain LSE requirements for a multi-type aircraft environment</li><li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures</li><li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures</li><li>Must have knowledge of aviation maintenance data systems and associated documentation/forms</li><li>Must have knowledge of life support equipment maintenance tools and tool control procedures</li><li>Must knowledgeable of principles of instruction</li><li>Must have knowledge of seat kit survival components</li><li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance</li><li>The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment</li><li>Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day</li><li>Must be able to climb stairs, ramps, and ladders and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to carry, push or pull up to 50 pounds</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet</li><li>Must be able to communicate by voice and detect sounds</li><li>Must be able to distinguish color and judge three dimensional depths</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet</li><li>Be able to travel to and between remote location(s)</li><li>Travel to austere or inhospitable high stress environments may be required</li><li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required</li><li>May be exposed to extreme noise from turbine and jet engine aircraft</li><li>May be exposed to fumes or airborne particles</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft</li><li>Will be exposed to surface obstructions (ladders, stairs, etc)</li><li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Veolia</strong>, a global leader in resource management, seeks a <strong>EHS Officer</strong> for our <strong>Sulaibiya Waste Water Treatment &amp; Reclamation Plant</strong> in Kuwait.</p><br><p>We specialize in innovative wastewater treatment and reclamation solutions, guided by our values of Responsibility, Solidarity, Respect, Innovation, and Customer Focus.</p><br><p>With a global workforce of 179,000, we're committed to sustainable development and optimizing resources. Join our team at this cutting-edge facility to contribute to environmental sustainability and water management in Kuwait.</p><br><p>At Veolia, you'll work on impactful projects, enjoy growth opportunities, and be part of our mission to lead the ecological transformation in wastewater treatment and reclamation.</p><br><br>Job Description<br><p><strong>Position Title: EHS Officer</strong></p><br><p><strong>Location: Sulaibiya Wastewater Treatment Plant, Kuwait</strong></p><br><p><strong>Reports to: EHS Manager – Kuwait (Sulaibiya Wastewater Plant)</strong></p><br><p><strong>Position Purpose:</strong></p><br><p>The EHS Officer will support the EHS Manager in implementing, monitoring, and improving health, safety, and environmental (HSE) programs across the Sulaibiya site. The position includes, but is not limited to, ensuring compliance with local legislation, company policies, and client requirements, while promoting a strong safety culture among all employees and contractors.</p><br><p><strong>Primary Duties/Responsibilities:</strong></p><br><ul><li>Monitor daily site activities to identify and report unsafe conditions, acts, or potential hazards.</li><li>Support incident reporting, investigation, and follow-up on corrective/preventive actions.</li><li>Conduct toolbox talks, safety inductions, and awareness sessions for employees and subcontractors.</li><li>Assist in preparing Permit to Work, risk assessments, and job safety analyses.</li><li>Carry out regular site inspections and participate in audits as directed by the EHS Manager.</li><li>Support the implementation of Life Saving Rules and site-specific safety campaigns.</li><li>Maintain HSE records, reports, and documentation as per Veolia.</li><li>Coordinate PPE issuance, inspections, and ensure proper usage across the site.</li><li>Provide first-level guidance on safety procedures to supervisors and workers.</li><li>Support emergency response activities.</li><li>Continuously do routine site checks and guarantee that good housekeeping and welfare facilities are available.</li><li>Make sure all safety practices are applied correctly (confined space procedure, Lock Out Tag out, Working at Height, Electrical safety, Chemical Loading and unloading). Only trained and authorized employees should perform the specific work.</li><li>Conduct monthly inspections of the emergency tools and equipment, report the findings with the relevant parties, and follow up on closing the findings</li><li>Support the EHS team in conducting emergency evacuation and chemical spill drills</li><li>Continuously monitor the employee's behavior towards safety by their actions and coach them accordingly.</li><li>Ensuring the implementation of the requirements from Veolia’s Life Saving Rules (LSR) and High Risk Management Standards (HRMS)</li><li>Inspect all machines (cranes and forklifts or any other machines), equipment (cutting, grinding, and welding), and PPEs before daily work starts - check for color coding and inspection forms</li></ul><p><strong>Skills &amp; Abilities:</strong></p><br><ul><li>Strong observation and reporting skills.</li><li>Ability to communicate safety requirements effectively to diverse teams.</li><li>Proficient in Google Workspace (G-Suite Tools: Drive, Docs, Sheets, Slides, Forms,…Etc) for safety reporting and presentations.</li><li>Team player with a proactive and positive safety mindset.</li><li>Ability to exercise and apply Stop Work Authority (SWA) in line with Veolia’s guidelines.</li><li>Ability to work under supervision and escalate critical issues promptly.</li><li>Adaptable to changing site conditions and able to prioritize safety in high-pressure environments.</li><li>Other duties as assigned.</li></ul><br>Qualifications<br><ul><li>Diploma in Occupational Health, Safety, Environmental Management, or related field (preferred).</li><li>Recognized safety training or certification (e.g., IOSH Managing Safely or equivalent) – preferred but not mandatory.</li><li>Experience, 4-7 years’ relevant experience in an industrial, construction, or utilities environment (preferably wastewater or water treatment plants).</li><li>Familiarity with Kuwait HSE regulations and international safety standards.</li><li>Basic understanding of chemical safety and industrial hygiene.</li><li>Basic understanding of risk assessment, incident investigation, and HSE documentation.</li></ul><br>Additional Information<br><ul><li>The role involves working outdoors and in operational plant areas.</li><li>&nbsp;&nbsp;&nbsp;&nbsp; Must be willing to work in extended hours when required for shutdowns or emergency works.</li></ul><p><strong>As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.</strong></p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Common Support Equipment Technician diagnoses, repairs, and maintains Common Support Equipment (CSE). Responsibilities include troubleshooting malfunctions, performing scheduled and unscheduled maintenance, analyzing maintenance trends, and documenting actions using automated systems. Technicians utilize various diagnostic tools, such as multi-meters and oscilloscopes, to repair mechanical and electronic systems. They also handle fluids, conduct corrosion treatments, manage hazardous materials, and prepare CSE for deployment. The role includes operating and servicing support equipment and tow vehicles, while adhering to safety, Tool Control, and Foreign Object Damage prevention standards at all times.</p><p>SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times.</p><p>ESSENTIAL FUNCTIONS Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conduct off station maintenance when required. When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS).</p><p>PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language.</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration.</li><li>Graduation from a standard four (4) year high school or equivalent (GED).</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures).</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing - I Level &amp; O Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required.</li><li>Have a strong knowledge base of Intermediate Level Maintenance business procedures.</li><li>Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver s license.</li><li>Must have an in-depth knowledge of technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must have a working knowledge (input and extract data) of computers.</li><li>Must be willing and able to work with job required hazardous materials.</li><li>Must be willing and able to conduct specialty on the job training.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The Common Support Equipment Technician diagnoses, repairs, and maintains Common Support Equipment (CSE). Responsibilities include troubleshooting malfunctions, performing scheduled and unscheduled maintenance, analyzing maintenance trends, and documenting actions using automated systems. Technicians utilize various diagnostic tools, such as multi-meters and oscilloscopes, to repair mechanical and electronic systems. They also handle fluids, conduct corrosion treatments, manage hazardous materials, and prepare CSE for deployment. The role includes operating and servicing support equipment and tow vehicles, while adhering to safety, Tool Control, and Foreign Object Damage prevention standards at all times. Responsibilities SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times. ESSENTIAL FUNCTIONS + Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. + Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. + Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. + Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. + Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. + Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. + Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. + Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. + Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. + Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. + Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. + Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. + Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). + Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. + Conduct off station maintenance when required. + When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Qualifications MINIMUM REQUIREMENTS / QUALIFICATIONS + Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language. + Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration. + Graduation from a standard four (4) year high school or equivalent (GED). + Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. + Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures). + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing -“I” Level &amp; “O” Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required. + Have a strong knowledge base of Intermediate Level Maintenance business procedures. + Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver’s license. + Must have an in-depth knowledge of technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must have a working knowledge (input and extract data) of computers. + Must be willing and able to work with job required hazardous materials. + Must be willing and able to conduct specialty on the job training.</p> </div>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness.</p><p>Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform. Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conducts off station maintenance when required. When necessary, perform other duties and functions critical to the support of the program.</p><p>Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma</li><li>Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: I Level &amp; O Level Tire &amp; Wheel certification Hydraulic Contamination certification Collateral Duty Inspector (CDI) qualification Corrosion Prevention and Control and Aircraft Paint qualification I Level Battery Maintenance certification</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.</li><li>Must have a working knowledge of first aid procedures to be used in an emergency.</li><li>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</li><li>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</li><li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li><li>Must have a valid U.S. Driver s License.</li><li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.</li><li>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.</li><li>Have a strong knowledge base of intermediate level maintenance business practices and procedures</li><li>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions.</li><li>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O level, I level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs.</li><li>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance.</li><li>Must have an in-depth knowledge of applicable technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.</li><li>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program.</li><li>Must be willing and able to work with hazardous materials and conduct specialty on-the-job training.</li><li>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.</li><li>Must have a proven ability to work independently with minimal direction.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Job Details / Position Summary The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness. Description: • Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform.• Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data• Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.• Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals.• Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications.• Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins.• Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. • Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance.• Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system.• Performs close tolerance adjustment, repair and rework of equipment in and out of shop area.• Services, inspects and tests aviation support equipment used for direct and indirect aircraft support.• Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type.• Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE).• Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment.• Conducts off station maintenance when required.• When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: • High School Diploma • Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: + “I” Level &amp; “O” Level Tire &amp; Wheel certification + Hydraulic Contamination certification + Collateral Duty Inspector (CDI) qualification + Corrosion Prevention and Control and Aircraft Paint qualification + “I” Level Battery Maintenance certification Experience: • Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. • Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. • Must be United States (U.S.) citizen , be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Have a strong knowledge base of intermediate level maintenance business practices and procedures • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” level, “I” level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance. • Must have an in-depth knowledge of applicable technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program. • Must be willing and able to work with hazardous materials and conduct specialty on-the-job training. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Master HVAC Technician - TS/SCI Job Category: Engineering and Technical Support Time Type: Full time Minimum Clearance Required to Start: TS/SCI Employee Type: Regular-Long Term Assignment Percentage of Travel Required: Up to 10% Type of Travel: Outside Continental US * * * The Opportunity: CACI is seeking a Master HVAC Technician to support our program in support to our mission critical client in Kuwait. As the selected candidate, you will perform inspections on HVAC systems and components (e.g. heating units, building exhaust fans, ventilation units, etc.) to evaluate condition, identify necessary repairs and recommend or perform preventive maintenance. Cleans, lubricates, and repacks the working parts of the system. Responsibilities: Tracks performance of routine and preventative maintenance to ensure availability of HVAC systems and troubleshoot HVAC/R systems with complex problems and extensive repairs requiring judgement to locate malfunctions. Respond to service calls and preventive maintenance inspections and produce reports in writing through computerized maintenance management system (CMMS) regarding malfunctioning/inoperable equipment. Responds to emergency situations during and after hours to resolve issues. Diagnoses causes of problems and/or failures in HVAC systems for the purpose of identifying equipment and/or systems repair and/or replacement needs. Install, repair, and maintain large commercial and industrial ventilation, refrigeration, air conditioning (AC), and cooling systems with complex problems and extensive repairs. Independently perform recurring work on exhaust fans, boilers, air handlers, pump, motors, air dryers, and other related HVAC equipment but not limited to HVAC control and monitoring systems. Installs, modifies, overhauls, repairs, and maintains a variety of complex HVAC equipment air conditioning, air handlers, pumps, motors, valves, heating systems, and associated auxiliary and control equipment. Works with engineering or scientific personnel to discuss plans, modifications, and user needs. Reviews available plans, specifications, or drawings; determines the size, shape, and location of equipment. Performs design, modification, maintenance and repair of critical environmental and energy support systems and associated highly sensitive state-of-the-art computerized controls and air quality monitoring systems located within US-Only areas of Intelligence and Security Command (INSCOM) Sensitive Compartmented Information Facilities (SCIFs). Provides critical advanced technical knowledge in support of unique security requirements inherent in Intelligence and Security Command (INSCOM) Sensitive Compartmented Information Facilities (SCIFs)operations including sound baffling techniques/equipment and the resolution of compromising electrical currents, as sustainment of high system availability rates. Produces classified technical documentation outlining in depth technical findings and recommendations. Provides design, emergency non-routine fault isolation of smoke removal systems, fire detection/suppression equipment used exclusively in critical, highly sensitive Military Forces installations. Performs system and subsystem diagnostics and scheduling and maintaining complex electronic environmental systems, calibration, and lubrication of unique components and controls that are used to provide and monitor precise environmental conditions within SCIFs housing unique military intelligence equipment, scientific devices, and technologies. Performs periodic, worldwide deployments in strategic and tactical mobile facility environments. Provides expert technical assistance for a 24-hour operational environment with limited documentation resources. Responds to off-duty (evening and weekend) calls to support critical system outages and to provide rapid fault isolation and resolution concerning environmental factors affecting ISR system performance to include developing technical documentation for ISR support system layouts. Supports US Army systems on site whenever and wherever deployed. Available to deploy to other countries and/or theaters to perform quick reaction technical support to US forces worldwide military contingency missions and requirements in potentially hazardous work environments. What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you ll be part of a high-performing group dedicated to our customer s missions and driven by a higher purpose to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground in your career and in our legacy. Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. The proposed salary range for this position is: $51,800-$106,200 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree and three years of experience College, Vocational School, or High School diploma or equivalent and a combination of 10 years education and experience with a valid Master HVAC license, or equivalent, at a State level; or 12 years experience in an equivalent Military HVAC training/certification. Specific experience in fault isolation and resolution of tactical and strategic environmental systems and their sophisticated electronic support systems. Ability to plan, install, troubleshoot and repair equipment and systems not fully covered by technical manuals, schematics, etc. 4 years experience with HVAC control and monitoring systems and their components. Experience with computerized maintenance management systems (CMMS). Expert level experience in design, installation and sustainment of computer controlled environmental systems in mobile secure facilities. Required to meet US Government accepted and industry standards criteria for technically complex computer environmental systems, uninterrupted power distribution systems, and power control equipment. Possess a North American Technician Excellence (NATE) certification. Able to maneuver in small spaces and lift up to 50lbs. US Citizen. Active TS/SCI clearance REQUIRED.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The Common Support Equipment Technician diagnoses, repairs, and maintains Common Support Equipment (CSE). Responsibilities include troubleshooting malfunctions, performing scheduled and unscheduled maintenance, analyzing maintenance trends, and documenting actions using automated systems. Technicians utilize various diagnostic tools, such as multi-meters and oscilloscopes, to repair mechanical and electronic systems. They also handle fluids, conduct corrosion treatments, manage hazardous materials, and prepare CSE for deployment. The role includes operating and servicing support equipment and tow vehicles, while adhering to safety, Tool Control, and Foreign Object Damage prevention standards at all times. Responsibilities SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times. ESSENTIAL FUNCTIONS + Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. + Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. + Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. + Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. + Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. + Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. + Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. + Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. + Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. + Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. + Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. + Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. + Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). + Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. + Conduct off station maintenance when required. + When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Qualifications MINIMUM REQUIREMENTS / QUALIFICATIONS + Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language. + Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration. + Graduation from a standard four (4) year high school or equivalent (GED). + Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. + Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures). + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing -“I” Level &amp; “O” Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required. + Have a strong knowledge base of Intermediate Level Maintenance business procedures. + Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver’s license. + Must have an in-depth knowledge of technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must have a working knowledge (input and extract data) of computers. + Must be willing and able to work with job required hazardous materials. + Must be willing and able to conduct specialty on the job training. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</p> </div>

<p>Civil Site Engineer required to work in the State of Kuwait.</p><p>&nbsp;</p><p>Qualifications and requirements</p><p>&nbsp;</p><p>1. Bachelor's degree in Civil Engineering.</p><p>2. Practical experience in the execution of structural steel and finishes for at least 3 years.</p><p>3. Provide experience certificates from previous employers.</p><p>4. Ability to quantify quantities and prepare pricing and initial project costs.</p><p>5. Proficiency in reading and analyzing structural and architectural drawings.</p><p>6. Ability to manage the site and follow up with subcontractors and workers, coordinating between different execution items.</p><p>7. Ability to monitor the schedule and progress rates and address delays on site.</p><p>8. Good knowledge of quality requirements, handover of works, and ensuring compliance with drawings and specifications.</p><p>9. Proficiency in AutoCAD, Microsoft Excel, and Word.</p><p>10. Proficiency in MS Project or Primavera is an added advantage.</p><p>11. Active membership in the Kuwait Engineers Association.</p><p>12. Valid Kuwaiti driver's license.</p><p>13. Owns a private car.</p><p>14. Demonstrates commitment, discipline, and the ability to manage site responsibilities, troubleshoot, and make decisions.</p><p>&nbsp;</p><p>Job responsibilities</p><p>&nbsp;</p><p>- Daily supervision of project sites and monitoring progress.</p><p>- Carrying out site inspections, taking measurements, and quantifying quantities.</p><p>- Preparing and reviewing project pricing before submitting bid proposals.</p><p>- Supervising subcontractors and ensuring quality and speed of execution.</p><p>- Receiving completed works and reviewing them before moving to the next phase.</p><p>- Monitoring site material and fabrication needs.</p><p>- Coordinating between structural works, finishes, electrical, plumbing, insulation, and other items.</p><p>- Preparing periodic reports on achievements, notes, and site constraints.</p><p>- Tracking the schedule and ensuring project duration is met.</p><p>- Maintaining quality of execution, reducing waste, and rework.</p><p>&nbsp;</p><p>&nbsp;</p>

<p>Position Title: 3D Visualizer / Draftsman (2 vacancies) Employment Type: Full Time Salary KWD: up to 450 inclusive depending on experience and qualifications Job Location: Shuwaikh, Kuwait About the Client: One of Kuwait's leading luxury furniture and interior lifestyle companies, representing world-renowned European brands and delivering premium furnishing solutions for residential and commercial projects. Job Description: -Create high-quality 3ds Max photorealistic renderings, 3D visualizations, and furniture layouts that showcase luxury interior concepts and support showroom sales. -Produce accurate 2D technical drawings, shop drawings, and detailed space plans using AutoCAD while ensuring design precision and functionality. -Collaborate closely with interior designers and the sales team to develop customized luxury furniture solutions and compelling client presentations. -Coordinate project drawings, maintain design documentation, and deliver premium-quality outputs that reflect the company's luxury Italian furniture standards.</p><p>Qualifications: -Bachelor's Degree in Architecture, Interior Design, or a related field with minimum 2 years of experience in 3D visualization, drafting, or technical design within luxury furniture, interiors, or fit-out. -Advanced proficiency in 3ds Max (mandatory), AutoCAD, SketchUp, Photoshop, and rendering software such as V-Ray or Corona Renderer. -Strong understanding of luxury furniture detailing, materials, lighting, space planning, and interior styling. -Excellent attention to detail, creativity, and the ability to work in a fast-paced luxury showroom environment.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>this is a full-time, on-site Draftsman (Revit) role based in Kuwait. The Draftsman will create detailed architectural drawings and 3D models using Revit, ensuring compliance with project specifications, building codes, and office standards. Day-to-day tasks include developing floor plans, elevations, sections, and details; coordinating with architects and designers; and updating drawings based on design changes and review feedback. The role also involves organizing project documentation, supporting design presentations with accurate visuals, and collaborating closely with the project team to meet deadlines and maintain high drafting quality.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Strong proficiency in Revit for architectural drafting, modeling, and documentation. Working knowledge of other design and drafting tools (e.g., AutoCAD, SketchUp, Rhino, or similar) and familiarity with BIM workflows Understanding of architectural design principles, building codes, construction methods, and technical detailingAbility to read, interpret, and produce accurate architectural drawings from sketches, concepts, and design briefsEffective communication and collaboration skills, with the ability to work closely with architects, designers, and other team members on-siteStrong attention to detail, organizational skills, and ability to manage multiple tasks and deadlines in a fast-paced environmentDiploma or degree in Architecture, Architectural Technology, or a related field; relevant professional experience in drafting is highly beneficialExperience working in an architectural or design firm, preferably with exposure to international projects or standards, is an advantage</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Responsibilities:</b></p><ol><li>Develop and implement customer service strategies that enhance customer satisfaction and achieve business objectives, focusing on innovation and continuous improvement.</li><li>Lead the customer service team, providing necessary training and support to ensure high-quality and effective service delivery.</li><li>Analyze customer service data and prepare regular reports for senior management, aiding in informed decision-making to improve performance.</li><li>Engage with customers to resolve issues and complaints effectively, contributing to relationship building and trust with clients.</li><li>Develop training programs for the customer service team to enhance their skills and increase their efficiency in handling customer inquiries.</li><li>Collaborate with other departments such as marketing and sales to ensure a seamless customer experience.</li><li>Evaluate team performance regularly and provide constructive feedback to enhance individual and collective performance.</li><li>Stay updated with the latest trends in customer service and implement best practices to ensure excellence in service delivery.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong leadership skills to manage and motivate the customer service team.</li><li>Ability to analyze data effectively and use it to improve performance.</li><li>Excellent communication skills to build strong relationships with customers.</li><li>Experience in developing customer service strategies and improving operations.</li><li>Problem-solving skills to address customer complaints efficiently.</li><li>Ability to work under pressure and manage multiple tasks simultaneously.</li><li>Familiarity with modern customer service tools and techniques to enhance customer experience.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Delivery and Returns Coordinator position is essential in the retail sector, focusing on managing delivery operations and coordinating returns effectively to ensure customer satisfaction and achieve business goals. This role requires strong organizational skills and the ability to handle daily challenges, making it an exciting opportunity for professionals looking to advance their careers in a dynamic environment.</p><p>In this role, you will have the chance to work with a diverse team of professionals who share the same vision for success. You will be able to develop your skills in communication and problem-solving, which will help you build a strong professional network. The company is committed to providing its employees with continuous training and development opportunities, ensuring you can progress in your career path.</p><p>You will be responsible for managing all aspects of delivery and returns, requiring you to be detail-oriented and organized. The ability to work under pressure and adapt to changing circumstances will be key attributes for success in this role. Be part of a team that strives for excellence in delivering high-quality services to customers.</p><p><b>Responsibilities:</b></p><ol><li>Coordinate delivery operations effectively to ensure products reach customers on time and in good condition.</li><li>Manage returns by identifying causes and analyzing data to improve future delivery operations.</li><li>Communicate with various departments such as inventory and logistics to ensure customer needs are met promptly.</li><li>Develop strategies to enhance the efficiency of delivery and returns processes, contributing to cost reduction and increased customer satisfaction.</li><li>Provide technical support to customers regarding product usage and return procedures, enhancing the customer experience.</li><li>Implement safety policies and procedures to ensure product protection during delivery operations.</li><li>Analyze customer feedback and comments to improve the quality of service provided.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong organizational skills to ensure effective management of daily operations.</li><li>Ability to communicate effectively with different teams and customers.</li><li>Analytical skills to identify issues and improve processes.</li><li>Good knowledge of inventory management and logistics systems.</li><li>Ability to work under pressure and adapt to fast-paced changes.</li><li>Proficient in using relevant software applications like Excel and ERP.</li><li>Experience in customer service and understanding their needs.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>A talented sales professional is sought for a dynamic team in the field of commerce and trade in Kuwait. Responsibilities include enhancing sales of our products and services, building strong relationships with clients, and achieving defined sales objectives. This opportunity is not merely a job; it is a chance to build a successful career in a growth-oriented work environment.</p><p>In this role, opportunities to develop sales skills and engage with a diverse client base will be available. We believe success comes from collaboration, so you will work with a dedicated team to achieve shared goals. Additionally, we offer continuous training and development programs to ensure you are always at the forefront of the latest market trends.</p><p>If you are looking for a work environment that encourages creativity and innovative thinking, this position is the ideal place for you. We value new ideas and foster knowledge sharing among team members. Start your journey towards success in the world of commerce.</p><p><b>Responsibilities:</b></p><ol><li>Identify and analyze client needs through direct communication and provide appropriate solutions that meet their expectations and assist in achieving sales goals.</li><li>Manage client relationships effectively by delivering excellent customer service, contributing to client loyalty and increasing repeat sales opportunities.</li><li>Organize and conduct product and service presentations, focusing on highlighting the unique benefits we offer to clients.</li><li>Regularly monitor and analyze sales performance, utilizing data to identify trends and improve strategies to meet defined objectives.</li><li>Collaborate with marketing teams to develop effective promotional campaigns, helping to increase brand awareness and enhance sales.</li><li>Participate in trade shows and industry events to strengthen networking and client engagement.</li><li>Interact with technical support teams to ensure timely and efficient response to client needs, enhancing overall client experience.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Experience of at least 3 years in the field of sales and marketing.</li><li>Negotiation and persuasion skills to achieve profitable deals.</li><li>Ability to manage time and organize tasks effectively to meet defined goals.</li><li>Strong teamwork and collaboration skills with diverse teams.</li><li>Adaptability to rapid market changes and ability to innovate in sales strategies.</li><li>Effective communication skills to build strong relationships with clients and understand their needs.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Financial and Administrative Controller is a vital role in any organization, contributing to maintaining the financial health of the company. In this position, you will work on analyzing financial data, preparing accurate reports, and assisting in strategic decision-making. You will have the opportunity to work with a diverse and supportive team, allowing you to develop your skills and enhance your knowledge in new areas. This role is ideal for individuals striving to achieve professional success in a dynamic environment.</p><p>You will be part of a work culture that encourages collaboration and continuous learning. We believe in the importance of developing our employees, which is why we offer training programs and educational courses to improve your financial and business skills. By working with us, you will be able to advance in your career, as new doors open for growth and development. We are looking for someone who has a passion for numbers and the ability to think critically to analyze financial data.</p><p>As part of our team, you will have a significant impact on the financial performance of the company. You will work closely with other departments to ensure that financial goals are met. We believe that every employee plays a crucial role in the success of the company, so we encourage innovation and creativity in the workplace. Get ready to embark on a professional journey that leads to new horizons.</p><p><b>Responsibilities:</b></p><ol><li>Analyze financial data regularly to ensure data accuracy and prepare comprehensive reports.</li><li>Prepare budgets and financial forecasts in collaboration with different teams to achieve financial objectives.</li><li>Monitor expenditures and revenues and ensure compliance with established budgets.</li><li>Provide financial advice to various departments to enhance financial performance and achieve strategic goals.</li><li>Develop and improve financial processes to reduce costs and increase efficiency.</li><li>Conduct regular internal audits to ensure compliance with financial standards and policies.</li><li>Communicate with external auditors to facilitate audit processes and ensure financial transparency.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li><b>Experience of at least 5 years and high competence.</b></li><li><b>Kuwaiti nationality preferred or other nationalities.</b></li><li><b>Strong knowledge of financial systems and regulations, and internal control procedures.</b></li><li><b>Budget preparation skills: proficiency in budgeting and financial forecasting.</b></li><li><b>Effective communication: ability to communicate clearly with different teams and provide financial advice.</b></li><li><b>Critical thinking: ability to think critically to solve complex financial problems.</b></li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-02&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-TX-EL PASO-M2 ~ 7201 Montana Ave ~ BLDG M2&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required on day 1<br><br><p>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.</p><br><br><br><p><b>What You Will Do :</b></p><br><br><p>The Dimensional Test Equipment (DTE) / Automatic Test Equipment (ATE) Engineer</p><br><br><p>As the principal authority for the support and maintenance of the contractor supplied</p><br><br><p>PATRIOT depot test stations, except for General Electric Test Set, the ATE engineer shall:</p><br><br><p>1. assist with determining operating ability of all contractor test equipment</p><br><br><p>2. verify that all test station manuals, test procedures, test software, fixtures, and Units</p><br><br><p>Under Test (UUT) are the correct configuration</p><br><br><p>3. assist in isolating problems between test station hardware, software, and UUT</p><br><br><p>4. assist and resolve test station software problems at system and UUT level</p><br><br><p>5. provide direct interface with contractor test personnel when additional testing</p><br><br><p>experience is required</p><br><br><p>6. coordinate training with KAD Depot trained technicians</p><br><br><p>7. schedule both informal classroom and practical exercise training activities that refresh previous depot training lessons</p><br><br><br><p>The DTE/ATE support personnel provide the technical operating knowledge, electrically and mechanically, as well as extensive practical experience to effectively operate, maintain and provide “self-sufficiency” training to the in-country support personnel. The DTE specialist will provide hands-on maintenance support and operational training on the repair of the Radar transmitter Battery Replaceable Units (BRU’s). Systems are computer driven and training will consist of both electronic and mechanical repair for the units under test. Working under a Patriot Test Station Lead, this position will require hands-on operation, maintenance and sustainment of the PAT 243 and PAT 247 Patriot test stations in support of Patriot Configuration 3+ systems. This will include operating troubleshooting and sustaining the coolant oil processing unit and Radar coolant group to ensure oil flow and glycol resistivity requirements are met for system unit operation. This will also include sustaining and troubleshooting converters, inverters and electric circuit’s assembly for the transmission system, by tracking signals and measuring voltage, current and resistance measurements to isolate problems to the component level on the Pat 247 test station. Functionally verifies the operational condition of the PAT 243, 244 and PAT 247 test stations to verify operational status. Demonstrates proper maintenance, sustainment, repair procedures and techniques. Participates in on-the –job training programs. Prepares, fills out and submits maintenance reports, system problem reports (SPR’s) and performs other duties as directed.</p><br><br><br><p><b>This position is located in Kuwait.</b></p><br><br><br><br><p><b>&nbsp;Qualifications You Must Have :</b></p><br><br><p>Must have four (4) years of demonstrated knowledge and experience in the operation, maintenance and sustainment of Dimensional Test Equipment (DTE) Station equipment and for testing, troubleshooting and repairing Patriot electronics Assemblies and Subassemblies to the component level, or equivalent test stations. Experienced in reading and understanding engineering drawings, schematics, books, technical documents and PC software. Demonstrated skills in using general tools and general use commercial test equipment, also in replacing component parts on circuit card assemblies. Must be able to work in extreme desert environments and lift 50 pounds. Must have a good understanding of standard industrial test equipment such as digital volt meters, high voltage probes, power meters, spectrum analyzers, frequency counters and oscilloscopes. A Secret Security Clearance is required.</p><br><br><br><p><b>Qualifications We Prefer:</b></p><br><br><p>A minimum of 6 to 8 years hands on knowledge and experience operating, maintaining and sustaining PAT 243, and PAT 244 test stations or equivalent test stations. Demonstrated experience working on Configuration 3 system assemblies and subassemblies. Experience working in and with a Middle East customer directly. Knowledge and experience in maintaining and sustaining DTE test station equipment.</p><br><br><br><p><b>Required Education:</b></p><br><br><br><p>Bachelor's degree&nbsp;in related field and 8-12 years of related experience.&nbsp;</p><br><br><br><p><b>What We Offer:</b></p><br><br><br><p>Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.</p><br><br><br><p><b>Additional Information:</b></p><br><br><br><p>Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products</p><br><br><br><p>#Patriot</p><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div>