Air Conditioning Technician Jobs

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Overview The Supply Chain Associate is responsible for material inventory management at the site level. Responsible for the overall management of the KC-130J supply warehouse, material requirements, and all logistics functions necessary for support of the assigned program. Assists the Supply Lead in the accomplishment of tasks assigned to the Supply Resource Center and serves as the point of contact on all logistics/supply/material related issues. Complies with all references pertaining to KAF logistics procedures, to include the KAF 4790 series manuals as they apply to this contract. Responsibilities Job Details / Position Summary Overview The Supply Chain Associate is responsible for material inventory management at the site level. Responsible for the overall management of the KC-130J supply warehouse, material requirements, and all logistics functions necessary for support of the assigned program. Assists the Supply Lead in the accomplishment of tasks assigned to the Supply Resource Center and serves as the point of contact on all logistics/supply/material related issues. Complies with all references pertaining to KAF logistics procedures, to include the KAF 4790 series manuals as they apply to this contract. Major Job Activities Description: · Assists the Supply Lead in the management of daily operations and execution of all tasks in support of the Supply Resource Center. · Works as a member of the supply team, executing tasks and facilitating priorities as prescribed by the Supply Lead and Maintenance Control. · Ensures timely and accurate completion of all supply related reports, contract deliverables, and relevant documents. · Enforces and exercises continuous awareness of the supply effort in compliance with the KAF 4790, V2X, and local policies and instructions. · Establish and maintain written procedures for the proper control of Government Furnished Property. · Ensures accountability, shipment, and receipt of detachment pack ups and retrogrades. · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Maintains liaison with adjacent contractors and agencies in the performance of duties to include the procurement of high priority components/consumables, coordinating, facilitating, and tracking all shipping requirements. · Manages all aspects of the Repair of Repairable (ROR) process, to include the preparation, coordination, tracking, and accurate documentation of all ROR transactions. · Submits changes to established procedures/business rules ensuring all functions are consistent with written procedures. · Establish and maintain stocking levels of aircraft components and consumables to ensure materials are available to meet maintenance requirements and maintain established contractual Mission Capability (MC) rates. · Uses established supply routes to pick up and drop off parts in the support of maintenance and the flight schedule. · Conducts and documents monthly inventories, maintains and updates supply records and documentation, maintains inventory at lowest possible cost to the customer. · Makes recommendations concerning the functions of the Supply process at all supply/logistics meetings. · Complies with DOT Hazardous Material Transportation Procedures. · Utilizes logistical/supply related automated information systems to research, order, track, open, and close out supply requisitions. · Processes, receives and restocks parts, maintaining all shipping documentation and certificates of conformance upon receipt of all parts as shipments arrive. · Requisitions replenishments to maintain adequate stock levels to ensure parts are available to maintain mission capable (MC) aircraft and ready for issue (RFI) support equipment. · Extensive working knowledge of Government Property Control/Procurement procedures in accordance with KAF 4790 · Works directly with the customer, interfacing with both U.S. and Kuwaiti government, in the conduct of daily business and on issues involving procedural deficiencies. · Complies with all company and government safety regulations to ensure a safe working environment. · Responsible for updating and maintaining the KAF’s supply information system: Kuwait Automated Supply Program (KASP) and maintenance information system: GOLD. · Maintains accurate records of government property throughout the acquisition and disposition process. · Responsible for adhering to all applicable maintenance programs (FOD, HAZMAT, ESD, etc..) required in the performance of duties. · Checkout and operate all necessary support equipment to conduct warehouse operations. · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Material &amp; Equipment Directly Used Kuwait Automated Supply Program (KASP), and maintenance information systems - GOLD. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds Qualifications Qualifications Education / Certifications: · High School Diploma · Must be able to obtain/maintain the following required certifications/qualifications: - Fork Lift License - Applicable Support Equipment licensing - Hazardous Shipping/Communication Training/Certification Experience: · Five years’ experience specializing in aviation supply/logistics operations, aviation supply warehouse management, shipping, ordering, receiving, supply/material control processes/procedures preferred. · Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. · Must have a working knowledge of first aid procedures to be used in an emergency. · Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, FOD, Tool Control, HAZMAT, etc…) as they relate to the functionality of supply/logistics duties. Specific Requirements: · Must be United States (U.S.) citizen, be able to read, write, and understand the English language · Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. · Must have a valid U.S. Driver’s License. · Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. · Must be willing and able to comply with all contractual Performance Work Statement (PWS) Requirements. · FOD, Tool Control, HAZMAT awareness trained as required by local policies. · Shall have experience in, and be capable of managing supply functions such as storage, issue, inspection, research, repairable component processing, shipping, receiving, warehousing, cataloguing, aircraft maintenance support, preparing MILSTRIP requisitions, and accounting for aircraft parts and equipment. · Must be familiar with and have the ability to fully manage, track, and facilitate the ROR process. · Must be proficient in the use of Microsoft Office Programs, including Word, Excel, and Power Point to create/modify briefs, spreadsheets, and formal requests/documentation. · Must be able to provide accurate and timely contract deliverable reports, documents, and analyses required for the overall management of the supply/logistics program functions. · Must be thoroughly familiar with technical directives, periodic maintenance requirement cards, maintenance manuals, and illustrated parts breakdowns, to conduct research on and parts requirements / procurement. · Must have good working knowledge of automated supply systems and efficiency in data entry. · Must successfully complete HAZMAT training as required for this position. · Must be able to meet any Government/Company licensing/qualification requirements for the position, to include operation of warehouse equipment: Forklift, pallet jack, etc… · Must possess strong communication skills, to include the ability to professionally communicate in writing and verbal capacities, to interface with squadron personnel, and to other supporting organizations. · Must be able to work directly with the customer and Kuwait Air Force officers providing accurate and timely information as requested via telephone, verbal, and email communication. · Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. · Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. · Must be able to multitask, have the ability to learn quickly, and have strong attention to detail and follow-through skills. · Excellent time management &amp; problem-solving skills. · Must be able to cross-train to support maintenance technicians in completing aircraft towing &amp; jacking evolutions. · Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. · Must perform as a team member, contributing to the success of the C-130J / CSE program. · Must have a proven ability to work independently with minimal direction.</p> </div>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Principal accountabilities</h4> <p>Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.<br> Inspects, instructs, services and certifies individual and crew equipment.<br> Order, receive and inventory kits and components.<br> Resolve shipping discrepancies.<br> Ensure proper fit of crew member clothing.<br> Maintain ALSE and NVD for DoS and DI personnel.<br> Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals.<br> Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment.<br> Perform other duties as assigned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required.<br> One (1) year verifiable experience as an ALSE technician.<br> Must possess a certificate of training as a school trained ALSE technician.<br> Valid US passport (minimum 2.5 years validity) required for deployment to Germany.<br> Ability to obtain and maintain a US government security clearance, NAC-I T1 public trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br> Must meet and be able to pass CENTCOM medical requirements prior to deployment.<br> Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait visa.</p> <h4>Knowledge & skills</h4> <ul> <li>CMF 92 supply & services MOS series or other military/commercial equivalent (92R MOS preferred).</li> <li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation.</li> <li>Must be able to ascertain LSE requirements for a multi-type aircraft environment.</li> <li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures.</li> <li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures.</li> <li>Must have knowledge of aviation maintenance data systems and associated documentation/forms.</li> <li>Must have knowledge of life support equipment maintenance tools and tool control procedures.</li> <li>Must be knowledgeable of principles of instruction.</li> <li>Must have knowledge of seat kit survival components.</li> <li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance.</li> <li>The ability to obtain and maintain a moderate risk public trust (MRPT) through Department of State background investigation is a condition of continued employment.</li> <li>Must possess or have the ability to obtain a U.S. passport before assignment, including renewal and additional pages if applicable.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day.</li> <li>Must be able to climb stairs, ramps, ladders and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push or pull up to 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>Must be able to communicate by voice and detect sounds.</li> <li>Must be able to distinguish color and judge three dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet.</li> <li>Be able to travel to and between remote location(s).</li> <li>Travel to austere or inhospitable high stress environments may be required.</li> <li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft.</li> <li>Will be exposed to surface obstructions (ladders, stairs, etc.).</li> <li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Aviation Life Support Equipment (ALSE) Technician serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices. Principal Accountabilities Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications. Inspects, instructs, services and certifies individual and crew equipment Order, receive and inventory kits and components Resolve shipping discrepancies Ensure proper fit of crew member clothing Maintain ALSE and NVD for DoS and DI personnel Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment Perform other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma or equivalent is required.</li><li>One (1) year verifiable experience as an ALSE technician.</li><li>Must possess a certificate of training as a school trained ALSE Technician.</li><li>Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.</li><li>Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.</li></ul><p>Knowledge &amp; Skills</p><ul><li>CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred)</li><li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation</li><li>Must be able to ascertain LSE requirements for a multi-type aircraft environment</li><li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures</li><li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures</li><li>Must have knowledge of aviation maintenance data systems and associated documentation/forms</li><li>Must have knowledge of life support equipment maintenance tools and tool control procedures</li><li>Must knowledgeable of principles of instruction</li><li>Must have knowledge of seat kit survival components</li><li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance</li><li>The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment</li><li>Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day</li><li>Must be able to climb stairs, ramps, and ladders and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to carry, push or pull up to 50 pounds</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet</li><li>Must be able to communicate by voice and detect sounds</li><li>Must be able to distinguish color and judge three dimensional depths</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet</li><li>Be able to travel to and between remote location(s)</li><li>Travel to austere or inhospitable high stress environments may be required</li><li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required</li><li>May be exposed to extreme noise from turbine and jet engine aircraft</li><li>May be exposed to fumes or airborne particles</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft</li><li>Will be exposed to surface obstructions (ladders, stairs, etc)</li><li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <b>Job Summary</b> </p> <p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. </p> <p> </p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. </p> <p> </p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. </p> <p> </p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.<b> </b> </p> <p> </p> <p> <b>Essential Responsibilities: </b> </p> <p> </p> <p> Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. </p> <p> Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. </p> <p> Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. </p> <p> Inspect bomb release systems and missile launchers to determine need for repair or destruction. </p> <p> Assist in management of all inspection, maintenance, and storage of munitions and support equipment. </p> <p> Support quality assurance, compliance, continuity, and standardization of munitions programs. </p> <p> Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. </p> <p> Maintain weapons certification and currency. </p> <p> Assist with availability and serviceability of munitions to support and meet customer requirements. </p> <p> Perform all other duties as assigned or requested.</p> <p> </p> <p> <b>Minimum Requirements:</b> </p> <p> </p> <p> Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. </p> <p> Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. </p> <p> Completed USAF Munitions/Weapons Tech School or DoD equivalent. </p> <p> Must possess basic knowledge of technical publications related to aircraft maintenance. </p> <ul> <li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li> </ul> <p> Must be able to inspect and operate ground support and auxiliary equipment. </p> <p> Must achieve a passing grade in all required courses/certifications for continued employment, as needed. </p> <p> Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. </p> <ul> <li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li> </ul> <p> Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. </p> <p> Must be able to speak, read, write, and understand English. </p> <p> Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. </p> <p> Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</p> <p> Must submit updated SF-86 within 30 days of hire start date. </p> <p> Must have current/active State Issued Driver s License. </p> <p> Must be able to acquire and maintain a valid flight-line Government Driver s License. </p> <p> Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. </p> <p> Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p> </p> <p> <b> Preferred Qualifications:</b> </p> <p> <b> </b> </p> <p> Associate degree in a relevant career field. </p> <p> RPA Deployment Experience. </p> <p> Prior Experience as a Defense Contractor. </p> <p> Munitions/Weapons experience within the last 10 years<b>. </b> </p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years .</li></ul><p></p></section>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts.</p><p><strong>Major Responsibilities:</strong> Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. Ensure all work areas and equipment are kept clean, orderly and in a safe manner. Performs quality and safety self-inspections. Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). Perform other duties as assigned in accordance with contractual, functional, and mission requirements.</p><p><strong>Other Requirements:</strong> Work will be outdoors and indoors. Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>One year related experience may be substituted for one year of education, if degree is required.</li><li>Prior military service of AFSC 3E072, Power Production Journeyman</li><li>Must be MAAS/BAK-12 Factory Trained &amp; Certified</li><li>High school diploma or equivalent.</li><li>Must be a U.S. Citizen with a current, valid U. S. Passport and Driver s License (able to drive manual transmission).</li><li>Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment.</li><li>Must have the capability of obtaining an Air Force flight line driver s license.</li><li>Must be able to pass a flight line access test and obtain flight line access badge.</li><li>Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc.</li><li>Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear.</li><li>Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12.</li><li>Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization.</li><li>Must have three years of experience operating and maintaining prime power spot generators and backup generators.</li><li>Must be capable of giving and receiving instructions.</li><li>Must be fluent reading and speaking English.</li><li>Able and willing to work periods of long hours to meet mission requirements.</li><li>Military experience in a contingency environment and knowledge and experience working with government contracts preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules.</li><li>Maintains accurate parts inventory during all maintenance activities.</li><li>Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability.</li><li>Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc.</li><li>Diagnoses malfunctions, isolate causes and corrects breaks.</li><li>Tests engine operations, using testing equipment to locate source(s) of malfunction.</li><li>Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices.</li><li>Disassembles and inspects parts for wear, warping, or other defects.</li><li>Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories.</li><li>Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions.</li><li>May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li><li>Highly desired to have a U.S. Passport valid for an additional two years with at least two facing pairs (four total) of blank Visa pages.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components. A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access. Operationally checks repaired or modified systems for proper operation. Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment. Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks. Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft. Disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders. Ability to become qualified and perform engine runs for the aircraft type they are assigned to support. Ability to read, write, and interpret technical duties is required. Ability to communicate effectively with all levels of employees throughout the organization. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies. Perform other qualified duties as assigned. Minimum Requirements High school diploma or GED equivalent is Required. A valid (FAA) A&amp;P Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired. Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required. Six (6) months of flight line and overhaul &amp; inspection experience is preferred. Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait). A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa. Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training. May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20) Mechanic Pre-employment Medical Requirements: Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. Security Clearance Requirements: Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility. Physical and Additional Qualifications Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to carry, push or pull up to and may exceed 50 pounds. May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Must be able to distinguish color and judge three dimensional depths. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Must have minimum 20/100 near and far vision, correctable to 20/20. Must be capable of living and working in a potentially hostile environment for an extended period. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</li><li>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</li><li>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</li><li>High school diploma or GED equivalent is Required.</li><li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li><li>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li><li>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li><li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment.</li><li>Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li><li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li><li>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</li><li>Must be able to obtain and maintain a US Govt Secret Security Clearance.</li><li>Must be able to obtain and maintain facility credentials and authorization.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts. Responsibilities Major Responsibilities: + Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. + Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. + Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. + Ensure all work areas and equipment are kept clean, orderly and in a safe manner. + Performs quality and safety self-inspections. + Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). + Perform other duties as assigned in accordance with contractual, functional, and mission requirements. Other Requirements: + Work will be outdoors and indoors. + Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. + Exposure to cold, dust, noise, and chemicals may occur. + Overtime and shift work may be required depending on contractual needs. + Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. + Task specific work environment training will be provided as required. + Must be prepared to function in a wartime environment to support U. S. interests. + 100% Overseas Assignment. Qualifications Minimum Qualifications: Education/Certifications : One year related experience may be substituted for one year of education, if degree is required. + Prior military service of AFSC 3E072, Power Production Journeyman + Must be MAAS/BAK-12 Factory Trained &amp; Certified + High school diploma or equivalent. + Must be a U.S. Citizen with a current, valid U. S. Passport and Driver’s License (able to drive manual transmission). + Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment. + Must have the capability of obtaining an Air Force flight line driver’s license. + Must be able to pass a flight line access test and obtain flight line access badge. + Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc. + Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear. Experience: + Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12. + Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization. + Must have three years of experience operating and maintaining prime power spot generators and backup generators. Skills : + Must be capable of giving and receiving instructions. + Must be fluent reading and speaking English. + Able and willing to work periods of long hours to meet mission requirements. + Military experience in a contingency environment and knowledge and experience working with government contracts preferred. We are committed to an inclusive and diverse workplace that values and supports the contributions of each individual. This commitment along with our common Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation and expand our success in the global marketplace. V2X is an Equal Opportunity /Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, protected veteran status or status as an individual with a disability. EOE/Minority/Female/Disabled/Veteran. #clearance #LI-RB1</p> </div>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Supply Technician II assists with documents pertaining to work orders completed within the MST (Maintenance Support Team) and is responsible for the OMDAC-SWACA calibration program. Provides weekly/monthly maintenance work order reports within the section and performs technical supply management tasks (e.g., inventory management, storage management, maintenance tagging of equipment). Has knowledge of supply operations and program requirements and the ability to apply established supply policies, day-to-day servicing techniques, regulations, and procedures. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Manage decentralized and decontrolled inventory, including supplies, and equipment. Items managed typically are of low unit or annual demand value, involve short procurement lead time, are obtained from standard or other readily available sources of supply, and reflect relatively stable patterns of demand. + Reconcile documentation on issues, receipts, storage of supplies and equipment. + Assist the Communication Sites and Signal O&amp;M elements in obtaining items from + alternate sources of supply for difficult to obtain repair parts, components, and assemblies for the Project. + Provide in-storage maintenance for equipment in stock record accounts + Operate PP&amp;C center at the TLSF, Camp Arifjan, Kuwait + Track workflow, production control, and reconcile work orders and provide customers with management reports needed to support their readiness status. + Establish and maintain current consolidated listings of all Shop Stock and Bench Stock items for all maintenance shops both fixed and mobile. + Maintain up-to-date maintenance and supply status on all work requests by shop location. Monitor status and quantity of work in each shop in order to foresee and prevent bottlenecks and recommend corrective actions as necessary. + Screens maintenance request and inspection reports for accuracy. + Request equipment density lists from supported customers or sites to assist in projecting workloads and in developing bench and shop stock requirements. + Provide monthly supply and maintenance readiness reports to the Maintenance Supervisor and to the Government’s identified POC’s. + May be required to provide assistance to and/or be assigned to the SRA (Supply Retail Activity) to meet operational requirements. + Perform other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Ability to obtain a National Agency Check with Inquires (NACI) to obtain a Common Access Card (CAC). + Ability to obtain and maintain a Secret level security clearance is preferred. + Education / Certifications: One-year related experience may be substituted for one year of education, if degree is required. + High School diploma or GED required. Some college preferred. + IASSC: Lean Six Sigma: Green Belt preferred + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + A minimum of five years experience in Supply operations. + Experience with automated supply management systems. + Must be able to obtain a forklift license. + Experience with a customer service-oriented company. + SUPERVISORY / BUDGETARY RESPONSIBILITIES + At least two years of supervisory or lead experience is preferred. + Update proprietary applications regarding: + Update section employee daily status, leave, sick, on site, etc. + Verify and track accomplishment of section monthly or quarterly safety and compliance training + Purge section employee expired certifications + Verify section employee compliance training in Virtual Training Record + Verify section vehicle logs are being kept accurately and uploaded + Ensure section personnel are maintaining their 8570 / 8140 certifications + Review weekly training compliance reports for accomplishment prior to suspense. + Review and approve leave forms ensuring before approval all compliance training is current. + Coordinate transportation and integration of new and returning employees. + Document and promptly counsel poor performance and policy violations. + Enforce all V2X, GO 1, and dress code policies. + Provide annual employee appraisal feedback in a professional and constructive manner. + Demonstrate V2X values Integrity, Respect, Responsibility, and Professionalism. + Ensure the safety of personnel and monthly safety inspections are properly conducted. + Communicate effectively up and down the chain of command. + Manage work schedules. + Conduct proper new and returning employee orientation and ensure employee thorough understanding and can accomplish all tasks in the Employee Job Certification (EJC) + Work with employees and HR when emergencies or abnormal circumstances occur. + To the best of your ability render all decisions based upon our company values and principles of Integrity, Respect, Responsibility, and Professionalism. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Perform preventive and corrective maintenance on&nbsp;DX units&nbsp;(package units, split ACs, rooftop units, etc.).</p></li><li><p>Diagnose and resolve&nbsp;mechanical faults&nbsp;(compressors, fans, belts, bearings, refrigerant leaks).</p></li><li><p>Diagnose and resolve&nbsp;control system faults&nbsp;(thermostats, pressure switches, contactors, relays, control wiring, PCBs).</p></li><li><p>Read and interpret wiring diagrams and technical manuals.</p></li><li><p>Carry out refrigerant recovery, evacuation, recharging, and brazing per safety standards.</p></li><li><p>Use multimeters, clamp meters, pressure gauges, and recovery machines.</p></li><li><p>Coordinate with service supervisor for breakdowns and maintenance schedules.</p></li><li><p>Maintain service logs and report recurring issues.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>3-5 Experience in the same field.</p></li><li><p>Good Communication Skills with client and team. Able to speak basic Arabic.</p></li><li><p>Valid Kuwait Transferrable Visa and Kuwait Driving License.</p></li><li><p>Able to join immediately and can work on flexible timings.</p></li><li><p>Can solve&nbsp;any type of troubleshooting&nbsp;– mechanical or control.</p></li><li><p>Ability to work independently in the field.</p></li><li><p>Attention to safety (electrical and refrigerant handling)</p></li><li><p>Strong analytical and problem-solving mindset</p></li></ol><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Performing routine check for refrigerant leaks, cleaning coils&amp; filters, electrical components. Diagnosing &amp; fixing malfunctions to ensure systems are working correctly &amp; efficiently. Good Knowledge in Central Unit, Casset, Split &amp; Chiller plants.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>SSLC</p><p></p></section>

<p>Install, test, commission, and troubleshoot BMS systems, including controllers, sensors, HVAC controls, and field devices. Read electrical drawings, perform loop checks, maintain systems, and ensure safe, timely project execution.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Candidate profile</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Perform preventive and corrective maintenance on&nbsp;DX units&nbsp;(package units, split ACs, rooftop units, etc.).</p></li><li><p>Diagnose and resolve&nbsp;mechanical faults&nbsp;(compressors, fans, belts, bearings, refrigerant leaks).</p></li><li><p>Diagnose and resolve&nbsp;control system faults&nbsp;(thermostats, pressure switches, contactors, relays, control wiring, PCBs).</p></li><li><p>Read and interpret wiring diagrams and technical manuals.</p></li><li><p>Carry out refrigerant recovery, evacuation, recharging, and brazing per safety standards.</p></li><li><p>Use multimeters, clamp meters, pressure gauges, and recovery machines.</p></li><li><p>Coordinate with service supervisor for breakdowns and maintenance schedules.</p></li><li><p>Maintain service logs and report recurring issues.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>3-5 Experience in the same field.</p></li><li><p>Good Communication Skills with client and team. Able to speak basic Arabic.</p></li><li><p>Valid Kuwait Transferrable Visa and Kuwait Driving License.</p></li><li><p>Able to join immediately and can work on flexible timings.</p></li><li><p>Can solve&nbsp;any type of troubleshooting&nbsp;– mechanical or control.</p></li><li><p>Ability to work independently in the field.</p></li><li><p>Attention to safety (electrical and refrigerant handling)</p></li><li><p>Strong analytical and problem-solving mindset</p></li></ol><p></p></section>