وظائف مراقب كاميرات - محافظة العاصمة (الكويت) الكويت

<p>The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Major Job Activities Description: Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level battery maintenance functions as required per applicable maintenance manuals. Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR Performs scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment (life rafts, first aid kits, etc..), pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated aviation life support equipment, airframes, and power plants systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Conducts off station maintenance when required. When necessary, perform other duties and functions critical to the support of the program.</p><p>Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p><p>Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p><p><strong>Desired Candidate Profile</strong></p><p>Education / Certifications:<br>- High School Diploma<br>- Must be able to obtain/maintain the following required certifications/qualifications:<br>- Aviation Gas Free Engineering (AVGFE) certification<br>- Auxiliary Power Unit (APU) run qualification<br>- I Level Battery Maintenance certification<br>- Applicable Support Equipment licensing<br>- Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification<br>- Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification<br>- Corrosion Prevention and Control qualification<br>- Confined Space Entry certification<br>Experience:<br>Four years maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred.<br>Must have a working knowledge of first aid procedures to be used in an emergency.<br>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).<br>Specific Requirements:<br>Must be United States (U.S.) citizen, be able to read, write, and understand the English language<br>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.<br>Must be able to obtain and maintain at a Secret Security Clearance.<br>Must have a valid U.S. Driver s License.<br>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.<br>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.<br>Must be willing and able to comply with all program functional requirements to include but not limited to:<br>The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.<br>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.<br>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.<br>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.<br>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to:<br>The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance.<br>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O and I level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs.<br>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed.<br>Must have an in-depth knowledge of aircraft technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.<br>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.<br>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.<br>Must perform as a team member, contributing to the success of the C-130J maintenance department.<br>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.<br>Must have a proven ability to work independently with minimal direction.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As a Corporate Travel Consultant, your primary responsibility is to provide exceptional travel services tailored to the needs of corporate clients. Your role encompasses client acquisition, relationship management, and ensuring seamless travel experiences. You will work closely with corporate clients to understand their travel requirements, manage bookings, and provide timely support. Your mission is to enhance client satisfaction, drive business growth, and ensure the highest standards of corporate travel services.</p><br><p><strong> Corporate Client Acquisition:</strong></p><ul><li><p>Identify and target corporate clients interested in travel services.</p></li><li><p>Develop and implement strategies to acquire new corporate clients.</p></li><li><p>Attend industry events, networking functions, and presentations to showcase our services.</p><br><p><strong>Client Relationship Management:</strong></p></li></ul><ul><li><p>Build and maintain strong, long-term relationships with corporate clients.</p></li><li><p>Serve as the main point of contact for clients, addressing inquiries, resolving issues, and offering</p></li></ul><p>travel assistance.</p><ul><li><p>Regularly communicate with clients to understand their changing travel needs.</p><br><p><strong>Travel Services:</strong></p></li></ul><ul><li><p>Consult with corporate clients to determine their travel requirements and preferences.</p></li><li><p>Create customized travel itineraries, including airfare, accommodation, ground transportation, and</p></li></ul><p>other services.</p><ul><li><p>Ensure compliance with corporate travel policies and budget constraints.</p><br><p><strong>Booking and Reservations:</strong></p></li></ul><ul><li><p>Handle all aspects of travel bookings, including flight reservations, hotel accommodations, car</p></li></ul><p>rentals, and other travel arrangements.</p><ul><li><p>Secure bookings efficiently and accurately, ensuring timely confirmations and seat preferences.</p><br><p><strong>Travel Support and Assistance:</strong></p></li><li><p>Provide ongoing support to corporate clients during their travels, including assistance with itinerary</p></li></ul><p>changes, rebooking, and resolving travel-related issues.</p><ul><li><p>Assist with emergency situations and coordinate alternative travel arrangements when necessary.</p><br><p><strong>Cost Management:</strong></p></li></ul><ul><li><p>Negotiate favorable rates and contracts with travel suppliers, including airlines, hotels, and car</p></li></ul><p>rental companies.</p><ul><li><p>Monitor and control travel costs to align with corporate budgets and cost-saving goals.</p><br><p><strong>Reporting and Documentation:</strong></p></li></ul><ul><li><p>Maintain accurate records of client interactions, travel bookings, and financial transactions.</p></li><li><p>Generate regular reports on travel expenditures, savings achieved, and client satisfaction.</p><br><p><strong>Compliance and Policy Adherence:</strong></p></li></ul><ul><li><p>Ensure compliance with corporate travel policies, regulations, and industry standards.</p></li><li><p>Monitor adherence to established corporate travel guidelines.</p><br><p><strong>Client Retention:</strong></p></li></ul><ul><li><p>Continuously assess client satisfaction and address any concerns promptly.</p></li><li><p>Implement strategies to retain corporate clients and encourage repeat business.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Proven experience as a Corporate Travel Consultant or in a similar role within the travel industry.</p></li><li><p>In-depth knowledge of travel booking systems, airline reservations, and corporate travel policies.</p></li><li><p>Strong negotiation and communication skills.</p></li><li><p>Excellent client relationship management abilities.</p></li><li><p>Detail-oriented with the ability to handle multiple bookings simultaneously.</p></li><li><p>Proficiency in travel management software and tools.</p></li><li><p>Knowledge of cost-saving strategies and travel expense management.</p></li><li><p>Familiarity with emergency travel procedures and crisis management.</p></li><li><p>Professionalism, reliability, and a customer-focused mindset.</p></li></ul><br><p><strong>Compensation:</strong></p><br><ul><li><p>Competitive salary with performance-based incentives.</p></li></ul><p></p></section>

Classification: Institutional Support<br><br>Reports To: Technology Support Coordinator<br><br>Location: Saad Al Abdullah, Kuwait<br><br>About The American International University<br><br>American International University (AIU) is a private institution in Kuwait, founded in 2019, offering undergraduate programs based on the American model of higher education. AIU provides degrees in Engineering, Architecture and Design, and Business Administration, with English as the language of instruction. The University is committed to fostering intellectual, cultural, and personal growth, preparing graduates for leadership roles in a global society.<br><br>For more information, visit: www.aiu.edu.kw<br><br>Job Summary<br><br>The IT Support Technician is responsible for providing frontline technical support to faculty, staff, and students at American International University (AIU). This role focuses on day-to-day troubleshooting, deployment, and maintenance of end-user technology, classrooms, laboratories, offices, academic software environments, and event-related IT systems. The position ensures a high level of service availability, responsiveness, and user satisfaction across the campus.<br><br>Role Impact<br><br>This role directly supports the continuity of academic instruction and administrative operations by ensuring that technology issues are resolved promptly and learning and working environments remain fully functional. The IT Support Technician plays a key role in minimizing downtime, supporting classroom and laboratory readiness, enabling successful university events, and ensuring effective use of institutional technology resources for students, faculty, and staff.<br><br>Key Responsibilities<br><br>IT Support & Helpdesk Operations<br><br>Provide desktop and end-user support for PCs, laptops, printers, and peripherals across the university. Install, configure, and set up new computer systems, hardware, and standard software images. Diagnose and resolve hardware, operating system, and application issues in a timely and efficient manner. Log, track, and resolve incidents and service requests using the IT Helpdesk Ticketing System (Service Desk Plus). Support and train users on key university applications including Microsoft 365, Canvas LMS, and Banner SIS. Assist students, faculty, and staff with login issues, access problems, and basic authentication-related troubleshooting. Conduct IT orientation and onboarding support for new faculty and staff members. Test and validate software updates, patches, and application deployments prior to or following rollout. Printing Student and Staff ID Cards and granting necessary access. Escalate unresolved or complex issues to the Technology Support Coordinator with appropriate documentation.<br><br>Classroom, Lab & Office Technology Support<br><br>Support daily operations of classrooms, laboratories, meeting rooms, and offices to ensure technology readiness. Assist with setup, testing, and troubleshooting of audio-visual systems, presentation equipment, and hybrid learning tools. Perform pre-session checks to ensure systems are operational for classes, exams, and meetings.<br><br>Academic Software & Lab Environment Support<br><br>Install, configure, and maintain academic and instructional software within computer laboratories in coordination with Academic Affairs and IT leadership. Provide operational support for academic software platforms used in teaching and learning environments. Assist students and faculty with software access, licensing issues, and application-related troubleshooting during lab sessions. Ensure lab systems are configured consistently and remain compliant with academic and licensing requirements. Support testing and validation of academic software updates prior to semester rollouts.<br><br>Endpoint Deployment & Asset Support<br><br>Assist with deployment, imaging, configuration, and replacement of Windows 10/11 PCs, laptops, and shared systems. Maintain and update IT asset inventory, including computers, peripherals, and assigned equipment. Support ID card printing management systems and associated hardware as required.<br><br>User & System Administration<br><br>Assist with domain access, user account creation, and email registration under established procedures. Administer and maintain Active Directory accounts, group memberships, and basic permissions. Support Microsoft 365 user accounts, email configuration, and collaboration tools. Assist with user account setup, password resets, access requests, and basic identity-related troubleshooting. Support faculty, staff, and students in the effective use of Microsoft 365, email, and collaboration tools.<br><br>Network & Infrastructure Support<br><br>Assist with basic network connectivity troubleshooting and performance-related issues. Support setup and management of laptops, projectors, and presentation equipment for classrooms and meetings. Support System Administrator and Network Engineer with diagnostics and implementation of systems.<br><br>Event Technology & Technical Support<br><br>Coordinate the setup, configuration, and testing of technical requirements for university events, workshops, forums, and special activities. Provide on-site technical support during events to ensure uninterrupted operation of systems, presentations, and audio-visual equipment. Perform basic analysis of event technical requirements and proactively identify necessary systems, equipment, and configurations based on event type, scale, and venue. Demonstrate initiative in understanding requestor requirements and independently preparing appropriate technical solutions. Coordinate with the Events Department, internal IT teams, and external vendors to deliver reliable event technology support. Assist with setting up and teardown of event-related technology before and after events.<br><br>Time Attendance System Administration<br><br>Support administration and operational use of the Time Attendance System (COSEC). Generate payroll-related attendance reports and weekly faculty attendance reports as required. Upload and maintain monthly shift schedules within the COSEC system based on approved rosters. Implement approved shift changes and schedule updates requested by the HR Department. Assist with troubleshooting attendance discrepancies and system-related issues in coordination with HR and IT leadership.<br><br>Documentation, Regulatory Compliance, and Continuous Improvement<br><br>Document resolved issues, troubleshooting steps, and common fixes to support knowledge sharing. Follow IT policies, SOPs, security guidelines, and service standards. Identify recurring issues and suggest improvements to processes or configurations.<br><br>Key Competencies<br><br>Strong troubleshooting and problem-solving skills Practical knowledge of Windows, Mac and Linux operating systems, end-user hardware, and academic lab environments Ability to support students and faculty in high-usage instructional settings Basic understanding of networking, identity systems, and cloud-based productivity platforms Customer-service mindset with clear communication skills Ability to follow procedures, prioritize tasks, and work under supervision Willingness to support extended hours during peak academic periods or events<br><br>Educational Qualifications & Certification<br><br>Diploma or bachelor’s degree in computer science, Information Technology, or a related field. Entry-level or relevant IT certifications are an advantage (e.g., Microsoft, Comp TIA, or equivalent).<br><br>How To Apply<br><br>Interested candidates should visit the Job Opportunities section on our website and submit a resume and cover letter via: https://aiu.edu.kw/careers/jobs<br><br>Applications will be reviewed on a rolling basis until the position is filled.<br><br>AIU is an equal opportunity employer committed to academic excellence, professional integrity, and the principled governance of Kuwaiti higher education.

Job Summary<br><br> JOB DESCRIPTION <br><br>The Application Engineer assists customers by identifying the best solution for their application, offers and sells complete product solutions from the Flow Controls portfolio, provides commercial and technical support to customers, and strives to deliver the highest standards of customer service while working closely with peers, Outside Sales, Service Engineers, Business Managers, and other stakeholders.<br><br>The Application Engineer will be based in Kuwait or Qatar. Key customers include NOC, Dolphin Energy, QAFCO, QChem, QELNG, and QE in Qatar, as well as KOC, KNPC, and Equate in Kuwait.<br><br>In This Role, Your Responsibilities Will Be:<br><br>Provide Applications Engineering, technical, and pricing support to customers in Qatar and Kuwait, including technical presentations and site walkdowns. Perform sizing and selection of control valves and other FCV products, review project specifications, and prepare deviation lists. Prepare customer quotations that are timely, technically accurate, commercially verified, and offer the best overall solution. Conduct direct customer technical sales calls, order closeouts, site walkdowns, and prepare associated reports. Coordinate with GIS and Engineering teams to conduct root cause analysis and develop solutions for severe-service applications and complex products. Present detailed technical solutions and recommendations to customers. Follow up on quotations with customers and the outside sales team until purchase orders are secured. Ensure purchase orders are commercially and technically compliant before order entry and process error-free orders to the appropriate factories. Coordinate with Project Management, Order Entry, and Customer Order Fulfillment (COF) teams to provide clean orders to factories and support customers with post-order documentation and requirements. Collaborate with the Flow Control Sales Manager and Application Manager to achieve sales targets and departmental KPIs. Maintain records and information within Emerson systems and tools, including Share Point and CRM platforms. Ensure compliance with Emerson Trade Compliance, Quality Management procedures, and Ethics policies. Stay current with product developments, industry trends, and market requirements.<br><br>Who You Are<br><br>Experienced in control valve products, applications, and Fisher sizing and selection tools. Experienced in selling control valve products and services to hydrocarbon, chemical, and petrochemical end users. Knowledgeable in industrial standards related to control valve design, manufacturing, and testing processes.<br><br>For This Role, You Will Need<br><br>Minimum 5 to 8 years of experience in the process control industry, including control valve products and applications. Bachelor’s degree in Engineering (Instrumentation, Mechanical, Chemical) or equivalent.<br><br>Preferred Qualifications That Set You Apart<br><br>Experience with control valve sizing and selection tools, including Fisher FF2. Strong interpretation skills related to engineering drawings, specifications, and P&ID documentation. Excellent communication and presentation skills. Ability to make sound technical decisions based on engineering principles, standards, and applicable codes. Ability to interact effectively with customers and adapt to diverse cultural environments.<br><br>Our Culture and Commitment To You<br><br>At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives—because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams working together are key to driving growth and delivering business results.<br><br>We recognise the importance of employee wellbeing and offer competitive benefits designed to support the physical, mental, financial, and social needs of employees and their families. Our offerings include medical insurance, employee assistance programmes, tuition reimbursement, employee resource groups, recognition programmes, and additional wellbeing resources. We also support work-life balance through flexible time-off programmes, including parental leave, vacation, and holiday benefits.<br><br>At Emerson, learning and development are integral to career growth. From onboarding through senior leadership development, employees have access to a wide range of opportunities, including instructor-led and virtual training, mentoring, coaching, project assignments, and hands-on learning experiences that help build skills and advance careers.<br><br>About Us<br><br>WHY EMERSON<br><br>Our Commitment to Our People<br><br>At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration.<br><br>We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world’s most complex problems — for our customers, our communities, and the planet. You’ll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor.<br><br>At Emerson, you’ll see firsthand that our people are at the center of everything we do. So, let’s go. Let’s think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let’s go, together.<br><br>Accessibility Assistance or Accommodation<br><br>If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com .<br><br>About Emerson<br><br>Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability.<br><br>With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety.<br><br>We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you’re an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you’ll find your chance to make a difference with Emerson. Join our team – let’s go!<br><br>No calls or agencies please.

<p>Job Purpose The Data Center Mechanical Engineer owns the mechanical and cooling infrastructure of the data center at engineering level, from the central cooling plant through to the data hall cooling environment. The role is responsible for mechanical maintenance strategy, system reliability, operational procedures, environmental performance, vendor management, safety compliance, spare-parts planning, and emergency response. The Mechanical Engineer directs the Mechanical Manning Technicians, authorizes equipment changeovers and critical maintenance activities, approves mechanical procedures, and acts as the mechanical technical authority during incidents and operational escalations.</p><p>Key Responsibilities and Areas of Ownership</p><ul><li>Take engineering ownership of the data center mechanical and cooling infrastructure, including chillers, cooling towers, chilled-water pumps, condenser-water pumps, heat exchangers, CRAH units, CRAC units, AHUs, ventilation systems, fans, filters, coils, valves, actuators, piping systems, and associated controls.</li><li>Manage the operation, reliability, and performance of chilled-water and precision-cooling systems serving the data halls and supporting areas.</li><li>Own mechanical equipment operating procedures, changeover procedures, start-up and shutdown sequences, and equipment rotation plans.</li><li>Authorize, lead, and supervise critical mechanical activities, including chiller changeovers, pump changeovers, cooling-tower changeovers, isolation activities, system draining, system filling, and restoration of equipment to service.</li><li>Monitor and maintain data hall environmental conditions, including temperature, humidity, airflow, differential pressure, cooling capacity, and equipment loading.</li><li>Review chilled-water supply and return temperatures, water flow, system pressure, differential pressure, valve positions, and system delta-T to identify performance issues and operational risks.</li><li>Manage cooling redundancy and capacity to ensure sufficient cooling remains available during maintenance, equipment failure, testing, or abnormal operating conditions.</li><li>Own the mechanical safety program, including Lockout/Tagout, Permit to Work, risk assessments, safe isolation, refrigerant safety, chemical-handling controls, and compliance with HSE requirements.</li><li>Develop and manage the annual mechanical Planned Preventive Maintenance program in accordance with OEM recommendations, equipment criticality, maintenance history, and operational requirements.</li><li>Prepare, review, approve, and maintain mechanical Standard Operating Procedures, Methods of Procedure, Emergency Operating Procedures, maintenance instructions, risk assessments, and equipment changeover procedures.</li><li>Ensure that all mechanical maintenance activities are planned around available cooling redundancy and executed without compromising data center availability.</li><li>Own vendor coordination for mechanical maintenance activities and supervise OEM major services, equipment overhauls, repairs, inspections, and specialist testing.</li><li>Review vendor method statements, risk assessments, service reports, test results, recommendations, and corrective-action requirements.</li><li>Manage critical spare-parts and inventory planning for chillers, pumps, cooling towers, CRAH and CRAC units, valves, actuators, sensors, filters, belts, bearings, motors, VFDs, and other mechanical systems.</li><li>Analyze cooling-system performance, equipment efficiency, energy consumption, operating trends, alarm history, temperature profiles, water-flow conditions, and equipment loading.</li><li>Identify and implement opportunities to improve cooling efficiency, airflow management, chilled-water performance, equipment sequencing, and overall energy performance without reducing system resilience.</li><li>Investigate mechanical faults, high-temperature conditions, leaks, abnormal vibration, low-flow conditions, low delta-T, equipment trips, control failures, and recurring alarms.</li><li>Lead root cause analysis for mechanical incidents and equipment failures and implement corrective and preventive actions.</li><li>Direct, develop, and train Mechanical Manning Technicians in operational procedures, inspections, first-line maintenance, alarm response, safe isolation, and incident escalation.</li><li>Review technician shift logs, inspection checklists, operating readings, alarm reports, and job-card closure records.</li><li>Support testing and commissioning activities, integrated systems testing, functional performance testing, equipment acceptance, redundancy verification, and operational-readiness activities.</li><li>Support predictive and condition-based maintenance programs, including vibration analysis, oil analysis, refrigerant checks, water and coolant sampling, thermal inspections, leak detection, and equipment-performance trending.</li><li>Manage liquid-cooling systems, Cooling Distribution Units, coolant loops, leak-detection systems, valves, pumps, and associated controls where installed.</li><li>Coordinate water-treatment activities, water-quality monitoring, chemical dosing, sampling, and corrective actions for chilled-water, condenser-water, and liquid-cooling systems where applicable.</li><li>Support WTP, STP, plumbing, drainage, and mechanical fire-protection systems where included within the data center operational scope.</li><li>Coordinate with electrical, BMS, IT, operations, HSE, vendors, and management teams during planned maintenance, incidents, testing, and emergency situations.</li><li>Maintain accurate mechanical documentation, asset records, maintenance reports, operating procedures, equipment histories, incident reports, testing records, and technical drawings.</li><li>Act as the mechanical technical authority during cooling incidents and operational escalations on a 24/7 on-call basis.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Engineer Level</li><li>Bachelor's degree in Mechanical Engineering.</li><li>Minimum of 5 years of mechanical, HVAC, cooling-plant, or critical-facility operations and maintenance experience.</li><li>At least 2 years of experience in a data center or another critical facility where loss of cooling could affect essential operations.</li><li>Demonstrated engineering-level experience with chilled-water systems, precision cooling, or critical HVAC systems.</li><li>Practical knowledge of chillers, pumps, cooling towers, heat exchangers, CRAH units, CRAC units, AHUs, valves, actuators, VFDs, and mechanical controls.</li><li>Experience in managing cooling redundancy, equipment capacity, environmental conditions, and critical maintenance activities in a live operational environment.</li><li>Demonstrated ownership of mechanical maintenance planning, technical procedure writing, incident response, vendor management, and spare-parts planning.</li><li>Experience preparing or approving SOPs, MOPs, EOPs, risk assessments, isolation plans, and maintenance procedures.</li><li>Ability to read and interpret P&amp;IDs, mechanical drawings, equipment schematics, sequence-of-operation documents, control diagrams, and OEM technical manuals.</li><li>Working knowledge of BMS or BAS platforms, mechanical alarms, equipment trends, sensors, control sequences, and environmental monitoring.</li><li>Good understanding of chilled-water temperatures, flow, pressure, differential pressure, delta-T, heat transfer, airflow, humidity, and cooling-capacity principles.</li><li>Experience with root cause analysis, corrective-action planning, and technical incident reporting.</li><li>Familiarity with testing, commissioning, integrated systems testing, and mechanical-system operational-readiness activities.</li><li>Fluent written and spoken English with strong technical reporting and communication skills.</li></ul><p>Other Requirements</p><ul><li>The role is fully on-site within an operational data center environment.</li><li>Availability for 24/7 on-call support is required.</li><li>The employee must be available to support planned shutdowns, emergency maintenance, testing activities, shift coverage, weekends, nights, and public holidays when operationally required.</li><li>The employee must comply with all company, client, data center, HSE, Permit to Work, LOTO, security, and access-control requirements.</li><li>The employee must be able to coordinate effectively with technicians, contractors, OEM vendors, operations teams, IT teams, and other engineering disciplines.</li></ul>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will supervise, perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply advanced technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Craftsman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic and advanced technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to acquire and maintain SCR task(s) for position, as required (MQ-9 Engine Run, Flex Borescope, etc.)</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li> <li>Provides training to lower-level Aircraft Mechanics.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of five years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of two years’ experience on MQ-9 aircraft, as aircraft mechanic.</li> <li>Must have advanced knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

Strategic Finance Manager — The Flex<br><br>The Flex is creating the future of flexible accommodation.<br><br>We operate and manage properties across multiple cities and countries, bringing together hospitality, technology and operational excellence to make renting a home as effortless as booking a hotel.<br><br>As our international footprint expands, we are searching for an outstanding Strategic Finance Manager to help build the financial systems, controls and insights required to support a rapidly growing global business.<br><br>This is far more than a conventional accounting position. You will work closely with our founders and leadership team, take ownership of essential financial processes, evaluate business performance and provide the insights that enable better decisions as we scale.<br><br>Your Mission<br><br>As Strategic Finance Manager, you will play a central role in The Flex’s financial operations.<br><br>Your objective will be to give the business complete clarity over where its revenue comes from, how its money is spent, how each area is performing and where profitability can be improved.<br><br>Your responsibilities will span accounting, financial analysis, management reporting, payment reconciliation, budgeting and business performance.<br><br>You will have exposure to the entire organisation, collaborating directly with operations, revenue management, property teams and senior leadership.<br><br>For an ambitious individual, this position offers a clear path toward becoming Head of Finance or, ultimately, moving into a CFO-track role as The Flex continues to grow.<br><br>What You Will Own<br><br>Lead and continuously strengthen our day-to-day financial controls and reporting, ensuring that every number shared with management is accurate, validated, complete and supported by reliable evidence. Identify repetitive and manual finance tasks, create more efficient processes and collaborate with our engineering teams to automate them. Reconcile payments from Airbnb, Booking.com, Expedia, direct reservations and other distribution partners, confirming that every expected payment is received correctly and on schedule. Reconcile bank accounts and incoming transactions, ensuring that funds are properly received and recorded while investigating and resolving discrepancies quickly. Monitor and manage accounts payable and accounts receivable. Review supplier invoices and expenses incurred across the company. Oversee statutory filings and corporate compliance requirements across several jurisdictions, making sure that all submissions are correct and completed within the required deadlines. Coordinate with external accountants, tax advisers, auditors and banking partners to maintain accurate financial records and ensure timely compliance. Assist with financial statements for landlords and property owners whenever required. Develop dashboards and reporting tools that provide management with real-time visibility into company performance. Evaluate financial results across individual properties, cities, countries and business units. Create and maintain company budgets, forecasts and financial models. Track cash flow and support management in planning future funding and capital needs. Detect financial risks, discrepancies and potential sources of revenue leakage. Review the company’s cost base and uncover opportunities to strengthen margins. Partner with operational teams to understand, control and reduce costs at property level. Contribute to financial due diligence for acquisitions, investments and expansion into new markets. Communicate financial findings, recommendations and actionable insights directly to the founders and management team.<br><br>What We Are Looking For<br><br>A highly analytical individual who is confident and comfortable working with numbers. Exceptional attention to detail and an uncompromising approach to financial accuracy. A strong understanding of accounting concepts and financial principles. The ability to work effectively with significant volumes of financial and operational data. Advanced proficiency in Excel or Google Sheets. Strong capabilities in financial reconciliation, controls and problem-solving. A commercial mindset—you do more than report figures; you understand their meaning and implications for the wider business. A strong sense of ownership, responsibility and accountability. The confidence to work independently, find solutions and navigate unfamiliar challenges. The ability to perform in a fast-paced environment where priorities may evolve quickly. Excellent verbal and written communication skills. The confidence to communicate and work directly with senior management. A genuine interest in technology, automation and AI, together with the ability to identify opportunities to improve and automate finance processes. The ambition to grow quickly and assume substantially greater responsibility over time. Experience in accounting, audit, investment banking, private equity, FP&A, consulting, hospitality, real estate or a high-growth startup would be highly valuable. A degree in Finance, Accounting, Economics, Business, Mathematics or another analytical discipline is preferred, although exceptional applicants from other backgrounds are encouraged to apply.<br><br>What Success Will Look Like<br><br>During Your First 6–12 Months, You Will Have<br><br>Developed a detailed understanding of the financial performance of every major area of The Flex. Established dependable monthly management reporting across the company. Ensured that payments from booking platforms and commercial partners are fully reconciled and that all expected funds are received. Significantly improved visibility into cash flow, profitability and unit economics. Uncovered meaningful opportunities to lower costs and improve margins. Automated several finance processes that were previously completed manually. Established yourself as a trusted financial partner to the founders and management team. Taken responsibility for increasingly important areas of the company’s finance function.<br><br>Why Join The Flex?<br><br>Become part of a rapidly growing international business operating at the intersection of real estate, hospitality and technology. Work closely and directly with the company’s founders and senior leaders. Gain hands-on exposure to the financial operations of a business spanning multiple countries. Influence profitability and contribute directly to major strategic and commercial decisions. Help design and build the finance function instead of simply taking over an established set of processes. Apply technology and AI to reimagine how a modern finance function should operate. Take meaningful ownership and responsibility from your first day. Receive a competitive salary together with performance-based incentives. Benefit from exceptional long-term career progression as The Flex continues its international expansion.<br><br>You Should Not Apply If<br><br>You want a conventional corporate 9-to-5 position with limited and narrowly defined responsibilities. You rely on someone else to continuously tell you what needs to be done. You are uncomfortable taking responsibility and being accountable for the quality of your work. You would rather report financial figures than understand, challenge and improve them. You engage in workplace politics, gossip or conversations about colleagues behind their backs. You are searching for a slow-moving, predictable role with limited career progression. You do not aspire to become one of the very best in the world at what you do.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Operations Superintendent Deep Drilling Land Rigs (3000 HP / HPHT) for our client in Kuwait.</p><p>Position Overview: The Operations Superintendent is responsible for the safe, efficient, and cost-effective execution of deep drilling land rig operations, ensuring compliance with client requirements, company policies, and regulatory standards.</p><p>Key Responsibilities:</p><p>Operations Management:</p><ul><li>Manage the day-to-day operational performance of assigned 3000 HP deep drilling land rigs.</li><li>Ensure drilling operations are executed safely, efficiently, and in accordance with approved drilling programs.</li><li>Monitor rig performance and implement initiatives to improve operational efficiency and reduce non-productive time (NPT).</li><li>Support rig start-ups, mobilizations, commissioning, and demobilization activities.</li><li>Coordinate operational resources to meet contractual obligations and client expectations.</li><li>Provide technical and operational guidance to Rig Managers and field leadership.</li></ul><p>HSE &amp; Well Control:</p><ul><li>Promote a strong HSE culture across all drilling operations.</li><li>Ensure compliance with company HSE policies, client requirements, and local regulatory standards.</li><li>Verify implementation of well control procedures and emergency response plans.</li><li>Participate in incident investigations, root cause analyses, and corrective action implementation.</li><li>Lead operational risk assessments and management of change (MOC) processes.</li><li>Ensure operational readiness for HPHT drilling activities.</li></ul><p>HPHT &amp; Deep Drilling Operations:</p><ul><li>Oversee execution of HPHT drilling operations while maintaining operational integrity.</li><li>Monitor drilling parameters and operational risks associated with deep wells.</li><li>Ensure equipment suitability for high-pressure drilling environments.</li><li>Coordinate with engineering, drilling, and maintenance teams to manage operational risks.</li><li>Review drilling performance and recommend continuous improvement initiatives.</li></ul><p>Client Management:</p><ul><li>Serve as the primary operational interface with clients.</li><li>Attend daily operational meetings and performance reviews.</li><li>Ensure timely reporting of operational performance.</li><li>Resolve operational issues while maintaining strong client relationships.</li><li>Support contract execution and service delivery objectives.</li></ul><p>Personnel Leadership:</p><ul><li>Provide leadership and coaching to Rig Managers, Toolpushers, and field supervisors.</li><li>Promote teamwork across multicultural workforces.</li><li>Identify training and competency development requirements.</li><li>Conduct operational audits and performance evaluations.</li><li>Support succession planning and workforce development.</li></ul><p>Financial &amp; Performance Management:</p><ul><li>Monitor operational costs and identify efficiency improvements.</li><li>Support budgeting and cost control initiatives.</li><li>Review KPIs, including: Non-Productive Time (NPT), Rig uptime, Safety performance, Drilling efficiency, Operational reliability.</li><li>Optimize resource utilization while maintaining operational integrity.</li></ul><p>Planning &amp; Coordination:</p><ul><li>Coordinate with Maintenance, Logistics, Procurement, HSE, and Engineering departments.</li><li>Ensure availability of equipment, consumables, and personnel.</li><li>Participate in operational planning meetings.</li><li>Manage contingency planning for critical operations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Mechanical Engineering, Petroleum Engineering, or a related technical discipline (preferred).</li><li>Proven experience of 12+ years of drilling operations with minimum 5 years as Operations Superintendent or equivalent.</li><li>Experience managing multiple drilling rigs simultaneously.</li><li>Proven leadership of 3000 HP deep drilling land rig operations in HPHT environments.</li><li>Strong operational experience across Middle East drilling projects.</li><li>Ability to manage multicultural teams and build high-performing operational cultures.</li><li>Demonstrated success in reducing NPT and improving drilling performance.</li><li>Strong client-facing experience with international operators and drilling contractors.</li><li>Comprehensive knowledge of drilling operations, well control, and HSE management systems.</li><li>Excellent planning, organizational, and problem-solving skills.</li><li>High level of commercial awareness with the ability to balance operational performance, safety, and cost efficiency.</li><li>Experience supporting rig upgrades, commissioning, and major operational improvement projects.</li><li>Valid IWCF or IADC WellSharp Supervisor certification.</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Maintain accurate general ledger accounts and accounting records.</p><p>Prepare and review journal entries, trial balances, and financial reports.</p><p>Manage <b>Accounts Payable (AP) and Accounts Receivable (AR)</b> and perform regular reconciliations.</p><p>Conduct bank and account reconciliations and resolve discrepancies.</p><p>Monitor cash movements, receipts, payments, and expenses.</p><p>Support monthly and year-end closing activities, including accruals, prepayments, depreciation, leave, and indemnity provisions.</p><p>Monitor inventory movements and ensure proper accounting records.</p><p>Prepare payroll-related reports and coordinate payroll accounting requirements.</p><p>Support the preparation and review of <b>project and tender-related financial information</b>, budgets, costs, and supporting schedules.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Assist management with financial analysis, reporting, and cost monitoring.</p><p>Ensure compliance with company accounting policies and applicable financial requirements.</p><p>Coordinate with internal departments, auditors, suppliers, and other stakeholders when required.</p><p>Identify accounting discrepancies and recommend corrective actions.</p><p>Maintain proper documentation and ensure financial records are complete and up to date.</p></div>

<p><h4>We are seeking an experienced drilling rig foreman to join the unconventional resources drilling department (URDD).</h4> <p>The successful candidate will be responsible for supervising and overseeing the daily operations of land drilling and workover rigs performing programmed activities on deep or critical wells, including wells ranging from approximately 18,000 to 23,000 feet.</p> <p>The drilling rig foreman will ensure that all drilling and workover activities are conducted safely, efficiently, and in accordance with company requirements, Saudi Aramco safety standards, applicable procedures, and contractual obligations.</p> <h4>Key responsibilities</h4> <ul> <li>Supervise and oversee daily drilling and workover rig operations.</li> <li>Ensure all rig personnel, contractors, and service providers comply with Saudi Aramco safety standards and requirements.</li> <li>Monitor and supervise all operations performed on the well site.</li> <li>Ensure drilling and workover activities are carried out safely, efficiently, and in accordance with approved programs and procedures.</li> <li>Serve as the primary liaison between the company and the drilling/workover contractor.</li> <li>Administer and monitor contractor compliance with all contractual requirements.</li> <li>Coordinate the delivery of well materials, equipment, and other required resources to ensure availability when needed.</li> <li>Make recommendations regarding alternative methods, procedures, or equipment when unusual or challenging situations arise.</li> <li>Work closely with drilling and workover engineers to ensure that modern and approved drilling practices are followed.</li> <li>Review and approve the contractor’s daily tour reports.</li> <li>Ensure that the contractor’s rig and equipment are properly maintained to minimize downtime.</li> <li>Ensure compliance with Saudi Aramco blowout prevention (BOP) standards, including equipment configuration, testing, and crew response.</li> <li>Ensure that all rig personnel are properly trained and prepared to respond to well control and emergency situations.</li> <li>Monitor contractor performance and ensure compliance with safety, operational, and contractual requirements.</li> <li>Perform other duties and responsibilities as directed by the supervisor or superintendent.</li> </ul> <h4>Requirements</h4> <ul> <li>Minimum 13 years of relevant experience in drilling and workover operations, including supervisory experience on a drilling or workover rig; or a bachelor’s degree in engineering with a minimum of 7 years of relevant experience.</li> <li>Proven experience in land drilling and workover operations, preferably involving deep or critical wells.</li> <li>Strong experience in supervising drilling rig crews, contractors, and service providers.</li> <li>Good knowledge of well control operations and blowout prevention (BOP) standards, including equipment configuration, testing, and crew response.</li> <li>Strong understanding of Saudi Aramco safety standards, HSE requirements, and drilling/workover procedures.</li> <li>Willingness to work in remote locations and mobile camps on a 28 days on/28 days off rotational schedule, working 12 hours per day.</li> </ul></p><p></p>

<p>The Head of Procurement is responsible for leading the procurement function across the organization. This includes formulating and implementing sourcing strategies, negotiating contracts, managing supplier relationships, and ensuring procurement practices are efficient, cost-effective, and compliant with company policies and industry standards. The role is instrumental in supporting operational efficiency, strategic sourcing, and long-term value creation.</p><p><b>Key Responsibilities:</b></p><p>Strategic Procurement Management</p><ul><li>Develop and execute procurement strategies aligned with the organization s goals.</li><li>Prepare annual procurement plans, budgets, and cost-saving initiatives.</li><li>Monitor market trends, supplier developments, and pricing dynamics to reduce risks and costs.</li></ul><p>Operational and Team Leadership</p><ul><li>Lead and manage the procurement team, ensuring high performance and continuous development.</li><li>Collaborate with internal stakeholders to understand procurement needs and ensure timely delivery of goods and services.</li><li>Optimize sourcing procedures and procurement processes to maximize efficiency and transparency.</li></ul><p>Supplier &amp; Contract Management</p><ul><li>Establish and maintain strong relationships with key suppliers and vendors.</li><li>Negotiate contracts, pricing, and service terms to ensure optimal value.</li><li>Oversee supplier evaluations and selection based on quality, cost, and reliability.</li><li>Ensure adherence to service level agreements (SLAs) and monitor supplier performance.</li></ul><p>Governance, Compliance &amp; Risk Management</p><ul><li>Ensure compliance with internal policies, legal regulations, and ethical standards.</li><li>Maintain proper documentation, records, and audit trails for all procurement activities.</li><li>Implement and uphold internal controls and QHSE policies.</li><li>Analyze procurement risks and develop mitigation strategies.</li></ul><p>Capital &amp; Facility Procurement</p><ul><li>Serve as the signatory authority for CAPEX purchase orders.</li><li>Manage procurement for capital goods and facility improvements.</li><li>Periodically coordinate with division heads to forecast and plan procurement requirements.</li></ul><p>Reporting &amp; Analysis</p><ul><li>Track procurement KPIs and report performance to senior management.</li><li>Conduct cost and scenario analyses, benchmarking, and expenditure reviews.</li><li>Research shifts in supplier negotiating power and adjust strategies accordingly.</li></ul><p><b>Other Responsibilities</b></p><ul><li>Support the management in complying with statutory requirements related to occupational health and safety.</li><li>Coordinate with departments for identification and sale of obsolete assets.</li><li>Lead or participate in special projects assigned by management</li></ul><p>Accountability and Authority. (QHSE): Implementation of ISO 9001:2015 and ISO 45001:2018 standards as well as core business values and IMS policies. Monitoring of QHSE training. Review and comply with internal/external audit findings, serious observations and conformance to risk assessment results. Monitor and ensure the implementation of all major accident recommendations. Review monthly IMS performance of the division and respond to areas of concerns. Ensure compliance with applicable legal, statutory, contractual, or other requirements. Provision of resources for QHSE implementation Promotion of a safe culture.</p><p><strong>Desired Candidate Profile</strong></p>Requirement open for Bilingual Arab nationalities Bachelor s or Master s degree in Supply Chain Management, Business Administration Minimum 15 years with at least 5-7 years experience in managerial role Excellent communication skills, Planning skills, Flexibility and contingent planning, Negotiation skills

<p><h4>About Jumeirah and the hotel:</h4> <p>Jumeirah, a global leader in luxury hospitality and a member of Dubai Holding, operates an exceptional portfolio of 30 properties across the Middle East, Africa, Europe and Asia. In 1999, Jumeirah changed the face of luxury hospitality with the opening of the iconic Jumeirah Burj Al Arab and the brand is now renowned worldwide for its distinguished beachfront resorts, esteemed city hotels and luxury residences. From the contemporary Maldivian island paradise at Jumeirah Olhahali Island to the art-inspired Jumeirah Capri Palace in Italy and the modern twist on a British classic at Jumeirah Carlton Tower in London, the brand has become synonymous with warm and generous service and the ability to craft distinctive and purposeful experiences that bring joy to guests from across the world.</p> <p>Jumeirah Messilah Beach Hotel and Spa offers easy access to Kuwait’s Central Business District, airport and major attractions. The beachfront resort features 316 rooms and suites, 80 residential suites and 12 villas, seven restaurants, cafés and lounges, a Talise Spa, 200-metre private beach, two swimming pools and a children’s play area. Extensive conference and banqueting facilities are available, including the Badriah ballroom.</p> <h4>About the job:</h4> <p>An opportunity has arisen for a Spa Manager to join the Spa at Jumeirah Messilah Beach, Kuwait. The main duties and responsibilities of this role:</p> <ul> <li><strong>Spa operations & team management</strong> – Oversee daily operations, provide guidance, encourage teamwork, and coordinate with internal and external stakeholders for smooth functioning.</li> <li><strong>Training & development</strong> – Develop and implement the department training plan, conduct hands-on training, and ensure adherence to quality standards.</li> <li><strong>Financial & marketing management</strong> – Prepare and monitor the department budget, implement marketing initiatives, and develop up-selling strategies to maximize revenue.</li> <li><strong>Guest experience & competitive analysis</strong> – Monitor guest feedback, analyze competitor services, and introduce innovative spa experiences, treatments, and products.</li> <li><strong>Maintenance & inventory control</strong> – Coordinate with engineering for maintenance, oversee spa equipment inventory as per audit standards, and ensure cost-effective operations.</li> <li><strong>Compliance & collaboration</strong> – Ensure adherence to company policies, health and safety regulations, and support interdepartmental collaborations for promotions and guest experiences.</li> </ul> <h4>About you:</h4> <p>An internationally recognized qualification in the spa industry, or equivalent field, and a minimum of 2 years leadership experience in a 5-star luxury spa environment.</p> <p>Should be computer literate with good working knowledge of computer applications such as MS Office. Be well-organized, process and result oriented.</p> <p>Work in a multicultural environment.</p> <p>It is essential to have strong command of the English language, both spoken and written.</p> <p>Have knowledge and experience with integrated wellness approaches and working models, strong market and competitiveness awareness, and the ability to plan, execute and monitor all required operational and training activities for a large team.</p> <h4>About the benefits:</h4> <p>Besides generous food and beverage benefits and reduced hotel rates across our hotels globally, this role has excellent employee benefits making it attractive to high performers and any applicant who likes to associate themselves with one of the most luxurious brands in the hospitality industry.</p></p><p></p>