وظائف مدير مشتريات في الكويت

<p>Promotes and enforces the implementation of all QHSSE requirements and facilitates implementation and improvement of Barrier Management System (BMS) onboard the rig. Provides guidance and expertise to all personnel on Health, Safety, &amp; Environmental (HSE) standards and assists with related goals and programs. Ensures appropriate dissemination of HSE policies, procedures, and guidance documentation. Maintains a strong presence at the worksite, especially in high-risk, high-activity areas (i.e., deck, drill floor). Approximately 75% of the working day should be spent at the worksite, If this is not being met due to other administrative work loads then it must be raised first to STP then to Rig Manager and the office based QHSSE Focal Point assigned to the rig if not achieved in 1 hitch. Promotes Safety Programs (i.e., ADES 8 keys to incident-free) on the rig, ensuring each employee is aware of their standards and how to apply them. Promotes ADES Awards (i.e., TOFS award) to embed the concept into the rig culture. Assists in the management of the Stop, Hazard, Initiate, Engage, Learn and Demonstrate (SHIELD) program and encourage active participation by undertaking safety performance conversations by all persons on board. Ensures Stop Work Authority (SWA) obligation is understood by all persons on board and exercised promptly. This is integral to the Company s safety culture. The RSO is expected to lead by example and should coach all crew members by helping them intervene and stop work when opportunities arise. Assists the Senior Tool Pusher by monitoring/verifying compliance with control of work systems such as JSA, SOP s, PTW, Isolation, Confined Space, Rescue Planning etc. Complies with, monitor, and effectively contribute to the continuous improvement of BMS, HSE related policies and procedures, and relevant authority regulatory requirements. Identifies and addresses in collaboration with the site operations management by identifying and addressing HSE or noncompliance concerns. Assists with internal/external audit completion, close-out, and tracking. Consults with personnel including safety leaders and department heads on all matters concerning safety. Engages with crews during safety meetings and supervisors meetings; presents topics/findings. Monitors the selection of suitable personal protective equipment (PPE) including performing checks on sizing and suitability. Maintains awareness of substances hazardous to health and the correct storage, use, handling, and PPE requirements. Carries out onboard training and/or books crew training to ensure full compliance with the crew training matrix. Assist third-party trainers as necessary. Assists, monitors, and verifies compliance with the short-service employee (SSE) process to ensure effective implementation and that on-the-job training is being provided to develop the SSEs. Participate and assist the Rig Manager with rig-based incident reporting and investigations to determine root cause(s). Ensure investigation findings are shared between all crews on board. Assist with and deliver rig orientation and induction (as requested). Liaise with customer representatives and regulatory bodies as necessary. Perform emergency duties as per the rig station bill. Moderates the rig self-verification process.</p><p><strong>Desired Candidate Profile</strong></p><p>Education &amp; Experience:</p><ul><li>Bachelor's degree</li><li>Preferably a minimum of 2 years in an RSO role.</li><li>Previous experience within the drilling industry in an HSE role/position.</li></ul><p>Skills/Competencies Required:</p><ul><li>Completion of all required ADES mandatory training requirements.</li><li>Working knowledge of Microsoft Office products (Excel, Word, PowerPoint, etc.).</li><li>Excellent written and verbal communication skills.</li><li>Detail-oriented.</li><li>Analytical thinking and solution Decision-making.</li><li>Performance Management, planning, problem-solving, organizational, and time management skills.</li><li>Inspire Trust.</li></ul><p>Certifications:</p><ul><li>As per ADES Training Matrix.</li><li>Formal investigation training certification preferred (i.e., Taproot , Topset or equivalent).</li><li>Recognized HSE training qualification preferred (i.e., NEBOSH, IOSH, OSHA or equivalent).</li><li>Additional QHSSE audit certifications</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Promotes and enforces the implementation of all QHSSE requirements and facilitates implementation and improvement of Barrier Management System (BMS) onboard the rig. Provides guidance and expertise to all personnel on Health, Safety, &amp; Environmental (HSE) standards and assists with related goals and programs. Ensures appropriate dissemination of HSE policies, procedures, and guidance documentation. Maintains a strong presence at the worksite, especially in high-risk, high-activity areas (i.e., deck, drill floor). Approximately 75% of the working day should be spent at the worksite, If this is not being met due to other administrative work loads then it must be raised first to STP then to Rig Manager and the office based QHSSE Focal Point assigned to the rig if not achieved in 1 hitch. Promotes Safety Programs (i.e., ADES 8 keys to incident-free) on the rig, ensuring each employee is aware of their standards and how to apply them. Promotes ADES Awards (i.e., TOFS award) to embed the concept into the rig culture. Assists in the management of the Stop, Hazard, Initiate, Engage, Learn and Demonstrate (SHIELD) program and encourage active participation by undertaking safety performance conversations by all persons on board. Ensures Stop Work Authority (SWA) obligation is understood by all persons on board and exercised promptly. This is integral to the Company s safety culture. The RSO is expected to lead by example and should coach all crew members by helping them intervene and stop work when opportunities arise. Assists the Senior Tool Pusher by monitoring/verifying compliance with control of work systems such as JSA, SOP s, PTW, Isolation, Confined Space, Rescue Planning etc. Complies with, monitor, and effectively contribute to the continuous improvement of BMS, HSE related policies and procedures, and relevant authority regulatory requirements. Identifies and addresses in collaboration with the site operations management by identifying and addressing HSE or noncompliance concerns. Assists with internal/external audit completion, close-out, and tracking. Consults with personnel including safety leaders and department heads on all matters concerning safety. Engages with crews during safety meetings and supervisors meetings; presents topics/findings. Monitors the selection of suitable personal protective equipment (PPE) including performing checks on sizing and suitability. Maintains awareness of substances hazardous to health and the correct storage, use, handling, and PPE requirements. Carries out onboard training and/or books crew training to ensure full compliance with the crew training matrix. Assist third-party trainers as necessary. Assists, monitors, and verifies compliance with the short-service employee (SSE) process to ensure effective implementation and that on-the-job training is being provided to develop the SSEs. Participate and assist the Senior Tool Pusher with rig-based incident reporting and investigations to determine root cause(s). Ensure investigation findings are shared between all crews on board. Assist with and deliver rig orientation and induction (as requested). Liaise with customer representatives and regulatory bodies as necessary. Perform emergency duties as per the rig station bill. Moderates the rig self-verification process.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Education &amp; Experience:</h2><ul><li>Bachelor's degree</li><li>Preferably a minimum of 2 years in an RSO role.</li><li>Previous experience within the drilling industry in an HSE role/position.</li></ul><h2>Skills/Competencies Required:</h2><ul><li>Completion of all required ADES mandatory training requirements.</li><li>Working knowledge of Microsoft Office products (Excel, Word, PowerPoint, etc.).</li><li>Excellent written and verbal communication skills.</li><li>Detail-oriented.</li><li>Analytical thinking and solution Decision-making.</li><li>Performance Management, planning, problem-solving, organizational, and time management skills.</li><li>Inspire Trust.</li></ul><h2>Certifications:</h2><ul><li>As per ADES Training Matrix.</li><li>Formal investigation training certification preferred (i.e., Taproot , Topset or equivalent).</li><li>Recognized HSE training qualification preferred (i.e., NEBOSH, IOSH, OSHA or equivalent).</li><li>Additional QHSSE audit certifications'</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a highly organized and experienced Senior Supply Chain Officer to oversee procurement, inventory control, warehouse coordination, and logistics operations within a manufacturing environment. The ideal candidate will have strong experience in end-to-end supply chain management, supplier relationship management, and ERP systems, ensuring efficient operations while maintaining cost-effectiveness, quality, and timely delivery.</p><p>Key Responsibilities:</p><ul><li>Manage procurement and supplier relationships</li><li>Coordinate inventory and warehouse operations</li><li>Monitor stock levels and ensure timely replenishment</li><li>Coordinate local and international shipments</li><li>Prepare supply chain reports and maintain accurate records</li><li>Ensure compliance with company policies and procedures</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Requirement open for Bilingual Arab nationals</li><li>Minimum 5-7 years of relevant experience in Manufacturing Industry preferred</li><li>Strong knowledge of procurement, inventory management, and logistics</li><li>Proficient in Microsoft Excel and ERP systems</li><li>Excellent communication and organizational skills</li><li>Ability to work under pressure and meet deadlines</li></ul><p></p></section>

The following announcement is for a position within the Kuwait National Space Research Centre (KNSRC), a department within KFAS.<br>Qualifications & Experience:Bachelor's degree in Information Technology, Computer Science, Computer Engineering, Information Systems, Cybersecurity or a related field (with equivalency by the Kuwait Ministry of Higher Education) Minimum of 4 years of experience in the same or related field Proficient in English and Arabic.<br>Key Accountabilities: Implement and monitor cybersecurity policies, controls, and protocols to protect the Centre’s data, systems, and network assets. Conduct vulnerability assessments, risk reviews, security checks, and coordinate actions to address identified issues. Ensure IT systems, configurations, and user practices comply with KFAS security standards, applicable Kuwaiti regulations, and relevant international standards such as ISO 27001. Manage identity and access controls and ensure user permissions are granted, reviewed, and revoked in line with policy. Monitor security tools, including SIEM, IDS/IPS, and firewalls, respond to security incidents, investigate root causes, and follow up on corrective actions. Coordinate the integration of the Centre’s IT infrastructure with Kuwait University’s firewall and network to support secure and effective connectivity. Configure and maintain VPN and WLAN infrastructure to ensure availability, performance, and security. Configure and maintain WAN, LAN, and wireless networks, including routing, switching, and access-layer equipment. Manage the configuration and performance of physical and virtual server infrastructure, including on-premises and cloud-hosted environments. Implement patching, updates, and lifecycle management for servers, operating systems, applications, and network equipment to keep systems current and secure. Manage storage solutions, backup systems, and data retention requirements to ensure data can be recovered when needed. Coordinate the rollout of new IT systems, including tracking timelines, resources, and budget use. Support the evaluation and management of IT vendors, suppliers, cloud providers, and third-party service providers to ensure service quality and value for money. Monitor maintenance contracts, software licenses, and service-level agreements and follow up to ensure vendors meet their obligations. Prepare technical specifications and support the preparation of Requests for Proposals (RFPs) for IT purchases and participate in vendor evaluation processes. Monitor warranty terms and vendor-supported systems and follow up on escalated vendor-related issues to ensure timely resolution. Review opportunities to consolidate or retire systems to reduce licensing costs and operating expenses.<br>Required Documents:Curriculum Vitae (CV). Copy of Civil ID. Certificate of insured service periods issued by the Public Institution for Social Security (PIFSS), dated on or after the announcement date. Academic certificate(s) and transcript(s), including the final graduation GPA. Equivalency of the academic certificate(s) from the Ministry of Higher Education, and Authentication of the transcript(s) for graduates of universities other than Kuwait University.<br>DISCLAIMER: Applications that do not meet the requirements or fail to submit all required documents within the announcement period will not be considered.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Food Safety &amp; Quality Control Officer</p><p>A specialized company in the <b>confectionery and chocolate manufacturing</b> industry is looking for a <b>Food Safety &amp; Quality Control Officer</b> with the following requirements:</p><p><br></p><p>Job Description &amp; Responsibilities</p><ul><li>Monitor product quality throughout all stages of production through to the finished product, ensuring consistent quality and compliance with approved specifications.</li><li>Inspect and monitor raw materials, manufacturing methods, storage, shelf life, and packaging.</li><li>Implement and monitor <b>HACCP, ISO 22000, and GMP</b> systems.</li><li>Identify product problems and defects, determine their causes, and take appropriate corrective actions.</li><li>Monitor product quality and food safety throughout the production stages.</li><li>Monitor hygiene, sanitation, <b>Allergens</b>, and <b>Traceability</b>.</li><li>Maintain and update records, procedures, and documentation.</li><li>Prepare the facility for inspections and audits.</li><li>Train and monitor employees on food safety and quality requirements.</li><li>Monitor chocolate and <b>Chocolate Tempering</b>, including knowledge of temperatures, handling methods, and storage.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Practical experience in <b>Food Safety and Quality Control</b> within confectionery or chocolate factories or companies.</li><li>Experience in implementing and monitoring <b>HACCP, ISO 22000, and GMP</b> systems.</li><li>Practical experience with chocolate and <b>Chocolate Tempering</b>.</li><li>Knowledge of temperatures, chocolate handling methods, and storage.</li><li>Ability to identify product problems and defects, determine their causes, and take appropriate corrective actions.</li><li>Knowledge and monitoring of hygiene and sanitation requirements.</li><li>Knowledge and monitoring of <b>Allergens</b>.</li><li>Knowledge and monitoring of <b>Traceability</b>.</li><li>Ability to maintain and update records, procedures, and documentation.</li><li>Ability to train and monitor employees on food safety and quality requirements.</li></ul><p><br></p></div>

<p>Candidates must demonstrate direct, hands-on experience in all of the following areas</p><ul><li>Quality audits - conducting structured, recurring audits of service delivery and staff performance</li><li>SOP development and enforcement - authoring, updating, and ensuring adherence to operational standards</li><li>Staff evaluations - formal performance assessment of frontline and field-based employees</li><li>Training and coaching - developing and delivering quality-focused training programs for service staff</li><li>Root-cause analysis - systematically diagnosing recurring service failures and quality gaps</li><li>Corrective action programs - designing and tracking closure of corrective and preventive actions</li><li>Service quality improvement initiatives - leading structured programs with defined KPIs and outcomes</li><li>Customer complaint investigations - managing escalations, resolutions, and pattern analysis</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Responsibilities</p><ul><li>Plan, direct and conduct overall training programme for employees working with SCM.</li><li>Carry out new starter Novice MHE training</li><li>Carry out MHE operator refresher training</li><li>Support the wider business units with MHE training as required</li><li>Carry out Defensive driving training</li><li>Carry out Staff Inductions</li><li>Carry out First Aid and Fire awareness training for staff as required.</li><li>Attend monthly site safety meeting and update on all matters relating to operator MHE training</li><li>Set goals, priorities and broad objectives for staff MHE training in collaboration with line managers and employees in order to reduce the cost, severity and frequency of accidents.</li><li>Facilitate in providing training sessions, develop appropriate objectives and ensure achievement for the same.</li><li>Coordinate the safety activities of all safety and training personnel to ensure maximum benefit across the company.</li><li>To be involved in investigating MHE incidents and accidents</li><li>Evaluate and review operating procedures and Safety precautions to minimise the potential for accident and injury.</li><li>Supervise and participate in accident/ incident investigations.</li><li>Ensure optimum level of customer satisfaction and compile all feedback to analyse work of employees.</li><li>Co-ordinate with line managers and supervisors to assess the training needs of individual departments.</li><li>Should evaluate the competency level of individual trainees to enable him work with employees with different knowledge and skill levels.</li><li>Manage and maintain in-house training facilities and equipment.</li><li>Research and recommend new training methods.</li><li>Assess training effectiveness to ensure incorporation of taught skills techniques into employees work behaviour.</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Candidate Requirements</p><ul><li>Proven work experience as a Trainer or similar role (coordinator/ facilitator).</li><li>Must be a MHE operative, with a recommended minimum 2 years experience.</li><li>Multi- skilled trainer who can deliver courses for a wide range of MHE.&nbsp;</li><li>Proven ability to complete full training cycle (assess and analyse needs, develop learning objectives, design and develop training programme, coordinate, monitor and evaluate).</li><li>Strong communication skills, preferably bilingual with English and Arabic.</li><li>Excellent Interpersonal, written and verbal communication skills.</li><li>Good organisational and self-management skills</li><li>Administrative skills to manage training programmes.</li><li>Competencies in MS Office and Presentation Skills.</li><li>Skill in analysing and organising information to develop, evaluate and improve safety and training programmes.</li><li>Ability to identify training needs and to facilitate and/ or provide training programme to meet those needs, and to conduct training on a variety of subjects (MHE operator training, Defensive driving, First Aid, Customer care etc).</li><li>Ability to communicate effectively, clearly, and concisely with individuals and groups, both orally and in writing.</li><li>Ability to work under pressures of time constraints and conflicting demands.</li><li>Degree/ or Diploma or equivalent is required, but will accept a combination of education and prior experience.</li><li>Candidate with MHE instructor certification is preferred</li><li>4-5 years experience in a professional logistics warehousing environment.</li></ul><p><br></p></div>

The following announcement is for a position within the Kuwait National Space Research Centre (KNSRC), a department within KFAS.<br>Qualifications & Experience:Bachelor's Degree in Electrical Engineering, Aerospace Engineering, Systems Engineering, Mechanical Engineering, Electronics, Instrumentation, or a related field (with recognition by the relevant Ministry of Higher Education). Minimum of 6 years of experience in the same or related field Proficient in English and Arabic. Key Accountabilities: Support the development and execution of satellite mission activities across relevant phases of the mission lifecycle, including system definition, integration, testing, launch preparation, commissioning support, and operational follow-up. Assist in translating mission objectives into technical requirements, subsystem specifications, payload needs, and implementation activities under the guidance of the Senior Specialist. Contribute to technical studies, feasibility assessments, schedule inputs, and risk identification to support mission planning and execution. Assist in monitoring mission performance, investigating technical issues, and contributing to corrective actions during operational phases. Support satellite system and subsystem design and integration activities to ensure technical compatibility, interface alignment, and mission readiness. Assist in the integration of payloads, sensors, and related subsystems into satellite platforms in coordination with relevant technical teams. Support the application of systems engineering processes across assigned activities, including requirements tracking, interface coordination, verification support, and change control. Participate in testing and validation activities, including functional, performance, and environmental testing, to confirm the readiness of systems and subsystems. Support the operation, maintenance, and enhancement of ground-segment elements, including mission-control tools, ground-support systems, and related technical infrastructure. Maintain and operate engineering and testing facilities, including electronics laboratories, sensor development laboratories, and environmental testing capabilities, to support satellite technology activities. Support the development and technical improvement of satellite systems, subsystems, and related space technologies to enhance performance, reliability, and long-term sustainability. Contribute to prototype development, engineering enhancements, and technical improvements related to satellite technology activities. Coordinate with relevant internal teams to support satellite technology activities, including system integration, calibration alignment, telemetry-related support, and mission execution. Support communication and coordination with satellite vendors, manufacturers, launch service providers, testing and integration facilities, technology suppliers, and other relevant external stakeholders involved in satellite activities.<br>Required Documents:Curriculum Vitae (CV). Copy of Civil ID. Certificate of insured service periods issued by the Public Institution for Social Security (PIFSS), dated on or after the announcement date. Academic certificate(s) and transcript(s), including the final graduation GPA. Equivalency of the academic certificate(s) from the Ministry of Higher Education, and Authentication of the transcript(s) for graduates of universities other than Kuwait University.<br>DISCLAIMER: Applications that do not meet the requirements or fail to submit all required documents within the announcement period will not be considered.

Others<br><br> Job Id :100195125<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>We are currently hiring for Heavy Equipment Maintenance Planning & Cost Control Officer<br><br>Key Responsibilities:‎<br><br> Prepare and monitor preventive and corrective maintenance plans and schedules.‎ Track equipment maintenance activities, downtime, spare parts, and repair ‎requirements.‎ Monitor maintenance costs, budgets, and expenditures.‎ Prepare maintenance reports, cost analyses, and performance summaries.‎ Coordinate with maintenance, operations, procurement, and suppliers.‎ Maintain accurate records of equipment history, maintenance activities, and costs.‎ Identify opportunities to improve equipment availability and reduce maintenance costs.‎<br><br>Requirements<br><br> ‎2–3 years of relevant experience in heavy equipment maintenance planning and/or cost ‎control.‎ Diploma/Bachelor’s degree in related field.‎ Experience with heavy machinery, construction equipment, or fleet maintenance is ‎preferred.‎ Good knowledge of MS Excel and maintenance planning/reporting systems.‎ Strong analytical, organizational, and communication skills.‎ Immediate joiners will be given preference.‎<br><br>If you meet the above criteria, please share your CV at: jobsinkuwait8@gmail.com<br><br>When applying, kindly mention the job title in the subject line of your email.<br><br>Only shortlisted candidates will be contacted.‎<br><br>Rent Construction Equipment<br><br>Basic Details<br><br>Location : Ahmadi , Kuwait<br><br>Qualification<br><br>Posted : 3 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : jobsinkuwait8@gmail.com

House driver required In Kuwait<br><br> Driver <br><br> Job Id :100195010<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Urgently required a House driver for a Kuwaiti house.<br><br>Immediate visa transfer<br><br>Genuine drivers pls call<br><br>Call- 90954984<br><br>98891046<br><br>Basic Details<br><br>Qualification<br><br>Posted : 7 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 90954984<br><br>Alternate Mobile : +965 98891046<br><br>Email : Not-Mentioned