وظائف لخريجي كلية التربية - محافظة العاصمة (الكويت) الكويت

<p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</li><li>Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</li><li>Minimum Requirements : High School Diploma or Equivalent is required.</li><li>With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. All experience must be within the Five (5) most recent years.</li><li>Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required. All experience must be within the Six (6) most recent years.</li><li>U.S. Military Technical school or specialized training course is desired, certification of education level is required.</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Security Clearance Requirements: Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li><li>Must be able to obtain and maintain facility credentials/authorization.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Additional and Preferred Qualifications : Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li><li>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li><li>May be expected to work in austere environments and all-weather conditions</li></ul>

<p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p><strong>Desired Candidate Profile</strong></p><p>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</p><p>Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</p><p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p><p>Safely prepare aircraft for inspections and maintenance checks and services.</p><p>Perform scheduled inspections and assist in performing special inspections.</p><p>Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p><p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p><p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Perform other duties as requested.</p><strong>Minimum Requirements :</strong><p>High School Diploma or Equivalent is required.</p><p>With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required.</p><p>All experience must be within the Five (5) most recent years.</p><p>Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required.</p><p>All experience must be within the Six (6) most recent years.</p><p>U.S. Military Technical school or specialized training course is desired, certification of education level is required.</p><p>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</p><p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</p><p>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</p><strong>Security Clearance Requirements:</strong><p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</p><strong>Additional and Preferred Qualifications :</strong><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p><p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p><p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p><p>Working knowledge of technical publications and Logistics Information Systems.</p><p>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p><p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><strong>Physical Requirements/Working Environment</strong><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to climb stairs, ramps, ladders, and work stands.</p><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p><p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>Will handle dirty parts and lubricants.</p><p>Will be required to wear proper Personal Protective Equipment (PPE).</p><p>Must be able to pass a Respirator Physical and Fit Test qualification.</p><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p><p>Must be able to lift/push/pull minimum of 50 pounds.</p><p>May work in maintenance shop or outside.</p><p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>May be exposed to extreme noise from operating equipment.</p><p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>May be expected to work in austere environments and all-weather conditions</p>

<strong>Overview</strong> <br> <br> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <br> <strong>Responsibilities</strong> <br> <br> <p>The Maintenance Controller for the Kuwait KC-130J Program at Al Mubarak airfield in Kuwait has is responsible for assisting the Maintenance Manager in daily operation and management and administration of the aircraft maintenance program, maintenance personnel, and maintenance actions required to support the customer s missions and flight schedules. The Maintenance Controller assigns priorities and directs maintenance personnel to correct discrepancies, generate work orders, track and comply with all inspection requirements, compile and record maintenance data applicable to the Maintenance Information System (MIS), provide the ability to compare records and reports on consumption of material, quality control, and other aspects of production.</p> <p> </p> <p> <strong>Description:</strong> </p> <ul> <li>Act as point of contact for all aircraft discrepancies that may affect daily operations and mission success.</li> <li>Direct and coordinate all scheduled and unscheduled maintenance actions and workload planning</li> <li>Attend meetings with the customer and provide information, reports, and official correspondence regarding aircraft status, mission capability, and maintenance planning information.</li> <li>Coordinate with the Maintenance Manager and customer representatives in the management of scheduled and unscheduled maintenance to ensure the most efficient use of time and resources.</li> <li>Analyze maintenance data to identify trends and initiate corrective actions as necessary.</li> <li>Manage completion of maintenance actions and ensure the complete and accurate entry of data into the Maintenance Information System (MIS).</li> <li>Coordinate with adjacent contractors and supporting agencies to acquire necessary tools, parts, support, materials, and equipment to prevent maintenance stoppages.</li> <li>Ensure accuracy of documentation, (i.e., aircraft, engine, propeller, logbooks, weight and balance records, and MIS) and adherence to technical publications, policies, procedures, and safe maintenance practices.</li> <li>Prepares and sends required reports and attend staff / customer meetings as required.</li> <li>Coordinate troubleshooting efforts on complex maintenance discrepancies, making recommendations for courses of action based on aircraft service history analysis, applicable Maintenance Manual guidance, and operator experience.</li> <li>Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts.</li> <li>Monitor and track all life limited components, periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by the Periodic Maintenance Requirements Manual, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions.</li> <li>Coordinate with operations personnel and aircrew members to ensure the flight schedule is adequately supported and missions are able to be conducted within prescribed timelines.</li> <li>Conduct off-station maintenance when required.</li> <li>Assist in the conduct of maintenance on the flight line and back shops as required to ensure aircraft are available to support the flight schedule.</li> <li>When necessary, perform other duties and functions critical to the support of the program.<br> </li> </ul> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>Education / Certifications:</strong> </p> <ul> <li>High School Diploma</li> </ul> <p>Must be able to obtain/maintain the following required certifications/qualifications:</p> <ul> <li> <p>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</p> </li> <li>Aircraft Weight &amp; Balance certification</li> <li>Safe for Flight certification</li> <li>Aviation Gas Free Engineering (AVGFE) certification</li> <li>Hydraulic Contamination certification</li> <li> I Level &amp; O Level Tire &amp; Wheel certification</li> <li> I Level MLG Brake repair / rebuilding qualification</li> <li>Auxiliary Power Unit (APU) run qualification</li> <li>Applicable Support Equipment licensing</li> <li>Collateral Duty Inspector (CDI) qualification</li> <li>Collateral Duty Quality Assurance Representative (CDQAR) qualification</li> <li>Corrosion Prevention and Control and Aircraft Paint qualification</li> <li>Confined Space Entry certification</li> </ul> <p> <strong>Experience:</strong> </p> <p> Eight years aircraft maintenance experience with five years experience working on C-130J aircraft preferred.<br> Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.<br> Safe for Flight experience and certification specific to C-130J aircraft preferred.<br> Must have a working knowledge of first aid procedures to be used in an emergency.<br> Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</p> <p> </p> <p> <strong>Specific Requirements:</strong> </p> <ul> <li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li> <li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li> <li>Must have a valid U.S. Driver s License.</li> <li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li> <li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li> <li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp;&nbsp;</li></ul> <p> </p> <p> </p>

<p>JOB SUMMARY Exhibits culinary talents by personally performing tasks while assisting in leading the staff and managing all food related functions. Works to continually improve guest and employee satisfaction while maximizing the financial performance in all areas of responsibility. Assists in supervising all kitchen areas to ensure a consistent, high quality product is produced. Responsible for guiding and developing staff including direct reports. Must ensure sanitation and food standards are achieved. Areas of responsibility comprise overseeing all food preparation areas (e.g., banquets, room service, restaurants, bar/lounge and employee cafeteria) and all support areas (e.g., dish room and purchasing) as applicable.</p><p>CORE WORK ACTIVITIES Assisting in Leading Kitchen Operations for Property Provides direction for all day-to-day operations. Understands employee positions well enough to perform duties in employees' absence or determine appropriate replacement to fill gaps. Provides guidance and direction to subordinates, including setting performance standards and monitoring performance. Utilizes interpersonal and communication skills to lead, influence, and encourage others; advocates sound financial/business decision making; demonstrates honesty/integrity; leads by example. Encourages and builds mutual trust, respect, and cooperation among team members. Serving as a role model to demonstrate appropriate behaviors. Ensures property policies are administered fairly and consistently. Reviews staffing levels to ensure that guest service, operational needs and financial objectives are met. Establishes and maintains open, collaborative relationships with employees and ensures employees do the same within the team. Solicits employee feedback, utilizes an "open door" policy and reviews employee satisfaction results to identify and address employee problems or concerns. Supervises and coordinates activities of cooks and workers engaged in food preparation. Demonstrate new cooking techniques and equipment to staff. Setting and Maintaining Goals for Culinary Function and Activities Develops and implements guidelines and control procedures for purchasing and receiving areas. Establishes goals including performance goals, budget goals, team goals, etc. Communicates the importance of safety procedures, detailing procedure codes, ensuring employee understanding of safety codes, monitoring processes and procedures related to safety. Manages department controllable expenses including food cost, supplies, uniforms and equipment. Participates in the budgeting process for areas of responsibility. Knows and implements the brand's safety standards. Ensuring Culinary Standards and Responsibilities are Met Provides direction for menu development. Monitors the quality of raw and cooked food products to ensure that standards are met. Determines how food should be presented, and create decorative food displays. Recognizes superior quality products, presentations and flavor. Ensures compliance with food handling and sanitation standards. Follows proper handling and right temperature of all food products. Ensures employees maintain required food handling and sanitation certifications. Maintains purchasing, receiving and food storage standards. Prepares and cooks foods of all types, either on a regular basis or for special guests or functions. Ensuring Exceptional Customer Service Provides and supports service behaviors that are above and beyond for customer satisfaction and retention. Improves service by communicating and assisting individuals to understand guest needs, providing guidance, feedback, and individual coaching when needed. Manages day-to-day operations, ensuring the quality, standards and meeting the expectations of the customers on a daily basis. Displays leadership in guest hospitality, exemplifies excellent customer service and creates a positive atmosphere for guest relations. Interacts with guests to obtain feedback on product quality and service levels. Responds to and handles guest problems and complaints. Empowers employees to provide excellent customer service. Establishes guidelines so employees understand expectations and parameters. Ensures employees receive on-going training to understand guest expectations. Reviews comment cards, guest satisfaction results and other data to identify areas of improvement. Managing and Conducting Human Resource Activities Identifies the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills. Ensures employees are treated fairly and equitably. Trains kitchen associates on the fundamentals of good cooking and excellent plate presentations. Administers the performance appraisal process for direct report managers. Interacts with the Banquet Chef and Catering department on training regarding food knowledge and menu composition. Observes service behaviors of employees and provides feedback to individuals and or managers. Manages employee progressive discipline procedures for areas of responsibility. Ensures disciplinary procedures and documentation are completed according to Standard and Local Operating Procedures (SOPs and LSOPs) and supports the Peer Review Process. Additional Responsibilities Provides information to executive teams, managers and supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. Analyzes information and evaluating results to choose the best solution and solve problems.</p><p><strong>Desired Candidate Profile</strong></p><h2>Education and Experience</h2><ul><li>High school diploma or GED; 6 years experience in the culinary, food and beverage, or related professional area.</li><li>OR 2-year degree from an accredited university in Culinary Arts, Hotel and Restaurant Management, or related major; 4 years experience in the culinary, food and beverage, or related professional area.</li></ul>

<p><b>PRIMARY FUNCTION:</b> Represent the affiliate s medical/scientific voice of expertise for assigned product(s) and relevant therapeutic area(s). Provide medical / scientific expert advice / guidance to key customers for assigned product(s) and relevant therapeutic area(s), including scientific exchange and professional relationship development with External Experts (EEs). Provide medical / scientific input into Medical Affairs strategies for the affiliate medical department and commercial plans, as required, and medical / scientific support for medical department activities under the overall direction of the Affiliate Medical Director. Provide medical affairs support to cross-functional affiliate teams. Ensure that the medical affairs role is fully integrated to support the strategy and execution of affiliate business, while being functionally independent.</p><p>RESPONSIBILITIES: Being an active brand team member to support overall strategy and execution. Provide medical/scientific input into marketing strategy and key commercial initiatives, as required. Develop and maintain in-depth knowledge for assigned product(s) / relevant therapeutic area(s) through attendance / participation at key internal meetings/training sessions, relevant congresses, and seminars and by regular self-study of the national/area literature. Provide expert medical/scientific advice for assigned products and related therapeutic areas, including responding to requests for scientific/technical information; contribute to the development and medical and scientific accuracy of core dossiers generated by the medical department (i.e., pricing and reimbursement dossiers, HEOR dossiers, medical information packs, clinical expert reviews etc.). Establish and maintain professional and credible relationships with External Experts (EEs) and academic centers; this will involve participating in scientific congresses, coordinating advisory boards, round-table meetings, discussion forums etc. Deliver scientific presentations and medical education programs to healthcare professionals individually or in groups (meetings, clinical sessions, etc.), where appropriate. Screen relevant literature and other information from relevant scientific societies meetings and conferences and develop summaries of key messages for use within the company (e.g. key areas of scientific/company interest, new trends in diagnosis, monitoring and treatments in the therapeutic area, etc.) Deliver training to sales forces and other departments; develop and update relevant training materials. Clinical Research Activities: Design and implement clinical research projects within defined standards and budgets (e.g., Phase IV, post marketing clinical activities such as registry/database projects, epidemiological surveys, and PMOS studies). Provide the required oversight to manage review, approval and conduct of IIS studies. Support the affiliate Clinical Research Department in the management of clinical studies, as appropriate (e.g., review new clinical study protocols, identifying potential investigators/sites, conducting feasibility surveys). Review and preparation of promotional / non-promotional material. Ensure the medical/scientific content is correct, balanced fair and fully compliant with AbbVie s internal policies and guidelines and in accordance with local laws. Ensure compliance with all applicable national laws and regulations, guidelines, codes of conduct, AbbVie s policies and procedures and accepted standards of best practice. Provide input, as required, into the development of product or TA specific strategic medical affairs plans for the affiliate medical department and local commercial plans; collaborate and partner with local business partners to ensure that medical activities for assigned products / therapeutic areas are aligned with local business-related strategic plans. Ensure adherence to all applicable national laws and regulations, guidelines, codes of conduct, AbbVie standards, policies, and procedures. Operate as a scientific interface and resource to HCPs/Customer(s), Health Care Institutions, External Experts, and professional associations regarding assigned AbbVie Products or Products in Development. Provide specialist medical/scientific strategic input and operational support of core activities such as local clinical research, HCP/Customer interactions, generation and communication of clinical and scientific data, educational initiatives, and patient safety for assigned products / therapeutic areas.</p><p><strong>Desired Candidate Profile</strong></p><p>Advanced degree (e.g. PharmD., PharmB., MD, PhD) in a relevant scientific discipline is preferred but candidates with an undergraduate degree in a relevant discipline and demonstrated experience will be considered Solid knowledge of the pharmaceutical environment and the role of Medical Affairs to advance the medical and scientific objectives of a pharmaceutical company. Prior experience in Medical Affairs required. Prior experience in immunology TA is preferred. Demonstrated expertise in the scientific methods applied to clinical research and current legislative/regulatory controls applicable to this research. Ability to comprehensively learn about new subject areas and environments. Excellent written and spoken communication and presentation skills, with a demonstrated ability to develop and maintain strong collaborative relationships with thought leaders, physicians, and other healthcare decision makers. A good understanding of written and oral English is mandatory. Collaborative, team-oriented approach, able to develop and support relationships across an organization as well as with key external stakeholders and the healthcare community at large. Experience being an active contributor to cross-functional teams and/or working in matrix organizations will be an advantage. Works independently: limited guidance/oversight. Works broadly across functions to facilitate and support the affiliate s medical and clinical activities as necessary. Sound judgment, strong planning and organizational skills, and the ability to get things done. Demonstrated strong sense of urgency. High customer orientation and high digital savviness skills. Strong commitment to compliance with the relevant rules and procedures, and to scientific quality and integrity Ability to travel regularly (approximately 50%)</p>

<p><h4>Job description</h4> <p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>With a valid (FAA) A&P certificate (preferred), two (2) years of aviation maintenance experience, two (2) years rotary wing aircraft experience, and two (2) years on the assigned MDS UH-60 aircraft is required. (See below for requirements without A&P).</p> <p>Valid US passport and US citizenship is required to obtain the NAC-I clearance and for facility access.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> <p>Perform scheduled inspections and assist in performing special inspections.</p> <p>Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.</p> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Perform other duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>With a valid (FAA) A&P certificate, two (2) years of aviation maintenance experience, two (2) years rotary wing aircraft experience, and two (2) years on the assigned MDS UH-60 aircraft is required. All experience must be within the five (5) most recent years.</li> <li>Without a valid (FAA) A&P certificate; must have three (3) years aviation maintenance experience, three (3) years of rotary wing aircraft experience, and a minimum of three (3) years on the assigned UH-60 Mission Design Series (MDS) is required. All experience must be within the six (6) most recent years.</li> <li>U.S. military technical school or specialized training course is desired; certification of education level is required.</li> <li>A valid US passport is required for deployment to Kuwait. The passport must have 3 years remaining before expiring and 6 blank pages available at the time of hire and deployment.</li> <li>Must be able to pass and clear CENTCOM Army MOD physical and requirements for deployment (will attend CRC/DIDC training).</li> <li>Must be able to obtain Kuwait PCC clearance and visa prior to deployment.</li> </ul> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US government NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Overview</strong> <br> <br> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.<br>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.<br> </p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong>Job Details / Position Summary</strong> </p> <p> </p> <p>The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p> <p> </p> <p> <strong>Major Job Activities</strong> </p> <p> </p> <p> <strong>Description:</strong> </p> <ul> <li>Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems.</li> <li>Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. <br> </li> <li>Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins.</li> <li>Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs.</li> <li>Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions</li> <li>Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components</li> <li>Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions.</li> <li>Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data</li> <li>Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control.</li> <li>Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control</li><li> </li> </ul> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>Education / Certifications:</strong> </p> <ul> <li>High School Diploma</li> <li>Must be able to obtain/maintain the following required certifications/qualifications:<br>- Aviation Gas Free Engineering (AVGFE) certification<br>- Auxiliary Power Unit (APU) run qualification<br>- I Level Battery Maintenance certification<br>- Applicable Support Equipment licensing<br>- Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification<br>- Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification<br>- Corrosion Prevention and Control qualification<br>- Confined Space Entry certification</li> </ul> <p><br></p> <p> </p> <p> </p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series.</p><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p><p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED)</p><p></p></section>

<p><h4>Position summary</h4> <p>Operate and monitor washing, dry cleaning, and drying machinery, including adding chemicals and cleaning lint traps. Identify stained or damaged items and determine status for repair, spot treatment, rewash, or discard. Inspect cleanliness of articles removed from the washer, dryer, or dry-cleaning machines and place in clean linen carts. Set dryers to designated times and temperatures based on fabrics contained in load. Remove lint and debris from dryer screens, dry cleaning filters, and drain trap after each load. Fold cleaned articles into designated size, either by hand or using folding machine. Maintain accurate records of items laundered.</p> <p>Follow all company safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets.</p> <p>Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings.</p> <p>Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualifications</h4> <p><strong>Education:</strong> No high school diploma or G.E.D. equivalent.</p> <p><strong>Related work experience:</strong> No related work experience.</p> <p><strong>Supervisory experience:</strong> No supervisory experience.</p> <p><strong>License or certification:</strong> None.</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>The world is a big place and Marriott Executive Apartments offers temporary housing that feels like home in the biggest and best cities for business travel across Europe, Asia, Latin America, Africa, and the Middle East. Join the Marriott Executive Apartments team and help our guests adapt to a new locale and feel comfortable and cared for while living away from home. In joining Marriott Executive Apartments, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Position summary</h4> <p>Prepare special meals or substitute items. Regulate temperature of ovens, broilers, grills, and roasters. Pull food from freezer storage to thaw in the refrigerator. Ensure proper portion, arrangement, and food garnish. Maintain food logs. Monitor the quality and quantity of food that is prepared. Communicate assistance needed during busy periods. Inform chef of excess food items for use in daily specials. Inform food and beverage service staff of menu specials and out of stock menu items. Ensure the quality of the food items. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards.</p> <p>Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualification</h4> <ul> <li>Education: Technical, trade, or vocational school degree.</li> <li>Related work experience: At least 3 years of related work experience.</li> <li>Supervisory experience: No supervisory experience.</li> <li>License or certification: None.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun.</p> <p>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Position summary</h4> <p>Prepare special meals or substitute items. Regulate temperature of ovens, broilers, grills, and roasters. Pull food from freezer storage to thaw in the refrigerator. Ensure proper portion, arrangement, and food garnish. Maintain food logs. Monitor the quality and quantity of food that is prepared. Communicate assistance needed during busy periods. Inform chef of excess food items for use in daily specials. Inform food and beverage service staff of menu specials and out of stock menu items. Ensure the quality of the food items. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards.</p> <p>Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualification</h4> <p><strong>Education:</strong> Technical, trade, or vocational school degree.</p> <p><strong>Related work experience:</strong> At least 3 years of related work experience.</p> <p><strong>Supervisory experience:</strong> No supervisory experience.</p> <p><strong>License or certification:</strong> None.</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun.</p> <p>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Position summary</h4> <p>Prepare special meals or substitute items. Regulate temperature of ovens, broilers, grills, and roasters. Pull food from freezer storage to thaw in the refrigerator. Ensure proper portion, arrangement, and food garnish. Maintain food logs. Monitor the quality and quantity of food that is prepared. Communicate assistance needed during busy periods. Inform chef of excess food items for use in daily specials. Inform food and beverage service staff of menu specials and out of stock menu items. Ensure the quality of the food items. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards.</p> <p>Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualification</h4> <ul> <li>Education: Technical, trade, or vocational school degree.</li> <li>Related work experience: At least 3 years of related work experience.</li> <li>Supervisory experience: No supervisory experience.</li> <li>License or certification: None.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun.</p> <p>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Position summary</h4> <p>Supervise and coordinate activities of cooks and workers. Determine how food should be presented and create decorative food displays. Ensure proper portion, arrangement, and food garnish to be served. Monitor the quantity of food that is prepared. Inform food and beverage service staff of menu specials and out of stock menu items. Prepare special meals or substitute items. Assist cooks and kitchen staff with various tasks. Provide cooks with needed items. Monitor stock of kitchen supplies and food. Maintain kitchen logs for food safety program and food products. Ensure the quality of the food items and notify manager if a product does not meet specifications.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards.</p> <p>Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualification</h4> <ul> <li><strong>Education:</strong> Technical, trade, or vocational school degree.</li> <li><strong>Related work experience:</strong> 4 to 6 years of related work experience.</li> <li><strong>Supervisory experience:</strong> At least 2 years of supervisory experience.</li> <li><strong>License or certification:</strong> None.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun.</p> <p>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Position summary</h4> <p>Prepare special meals or substitute items. Regulate temperature of ovens, broilers, grills, and roasters. Pull food from freezer storage to thaw in the refrigerator. Ensure proper portion, arrangement, and food garnish. Maintain food logs. Monitor the quality and quantity of food that is prepared. Communicate assistance needed during busy periods. Inform chef of excess food items for use in daily specials. Inform food and beverage service staff of menu specials and out of stock menu items. Ensure the quality of the food items. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards.</p> <p>Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualification</h4> <ul> <li>Education: Technical, trade, or vocational school degree.</li> <li>Related work experience: At least 3 years of related work experience.</li> <li>Supervisory experience: No supervisory experience.</li> <li>License or certification: None.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun.</p> <p>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Position summary</h4> <p>Prepare special meals or substitute items. Regulate temperature of ovens, broilers, grills, and roasters. Pull food from freezer storage to thaw in the refrigerator. Ensure proper portion, arrangement, and food garnish. Maintain food logs. Monitor the quality and quantity of food that is prepared. Communicate assistance needed during busy periods. Inform chef of excess food items for use in daily specials. Inform food and beverage service staff of menu specials and out of stock menu items. Ensure the quality of the food items. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualification</h4> <ul> <li><strong>Education:</strong> Technical, trade, or vocational school degree.</li> <li><strong>Related work experience:</strong> At least 3 years of related work experience.</li> <li><strong>Supervisory experience:</strong> No supervisory experience.</li> <li><strong>License or certification:</strong> None.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p> <p>JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J. Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates</p><p></p>

<p><h4>Job summary</h4> <p>Accountable for the quality, consistency and production of the restaurant kitchen. Exhibits culinary talents by personally performing tasks while leading the staff and managing all food related functions. Coordinates menus, purchasing, staffing and food preparation for the property's restaurant. Works with team to improve guest and employee satisfaction while maintaining the operating budget. Must ensure sanitation and food standards are achieved. Develops and trains team to improve results.</p> <h4>Candidate profile</h4> <p><strong>Education and experience</strong></p> <ul> <li>High school diploma or GED; 4 years experience in the culinary, food and beverage, or related professional area.</li> <li>OR</li> <li>2-year degree from an accredited university in Culinary Arts, Hotel and Restaurant Management, or related major; 2 years experience in the culinary, food and beverage, or related professional area.</li> </ul> <h4>Core work activities</h4> <p><strong>Ensuring culinary standards and responsibilities are met for restaurant</strong></p> <ul> <li>Develops, designs, or creates new applications, ideas, relationships, systems, or products, including artistic contributions for restaurant.</li> <li>Supervises restaurant kitchen shift operations and ensures compliance with all Food & Beverage policies, standards and procedures.</li> <li>Maintains food preparation handling and correct storage standards.</li> <li>Recognizes superior quality products, presentations and flavor.</li> <li>Plans and manages food quantities and plating requirements for the restaurant.</li> <li>Communicates production needs to key personnel.</li> <li>Assists in developing daily and seasonal menu items for the restaurant.</li> <li>Ensures compliance with all applicable laws and regulations.</li> <li>Follows proper handling and right temperature of all food products.</li> <li>Estimates daily restaurant production needs.</li> <li>Prepares and cooks foods of all types, either on a regular basis or for special guests or functions.</li> <li>Checks the quality of raw and cooked food products to ensure that standards are met.</li> <li>Determines how food should be presented and creates decorative food displays.</li> </ul> <p><strong>Leading kitchen team</strong></p> <ul> <li>Supervises and coordinates activities of cooks and workers engaged in food preparation.</li> <li>Utilizes interpersonal and communication skills to lead, influence, and encourage others; advocates sound financial/business decision making; demonstrates honesty/integrity; leads by example.</li> <li>Leads shift teams while personally preparing food items and executing requests based on required specifications.</li> <li>Supervises and manages restaurant kitchen employees. Managing all day-to-day operations. Understanding employee positions well enough to perform duties in employees' absence.</li> <li>Encourages and builds mutual trust, respect, and cooperation among team members.</li> <li>Serves as a role model to demonstrate appropriate behaviors.</li> <li>Ensures and maintains the productivity level of employees.</li> <li>Ensures employees are cross-trained to support successful daily operations.</li> <li>Ensures employees understand expectations and parameters.</li> <li>Establishes and maintains open, collaborative relationships with employees and ensures employees do the same within the team.</li> </ul> <p><strong>Establishing and maintaining restaurant kitchen goals</strong></p> <ul> <li>Sets and supports achievement of kitchen goals including performance goals, budget goals, team goals, etc.</li> <li>Develops specific guidance and plans to prioritize, organize, and accomplish daily kitchen operations work.</li> <li>Understands the impact of kitchen operation on the overall property financial goals and objectives and manages to achieve or exceed budgeted goals.</li> <li>Effectively investigates, reports and follows-up on employee accidents.</li> <li>Knows and implements company safety standards.</li> </ul> <p><strong>Ensuring exceptional customer service</strong></p> <ul> <li>Provides services that are above and beyond for customer satisfaction and retention.</li> <li>Manages day-to-day operations, ensuring the quality, standards and meeting the expectations of the customers on a daily basis.</li> <li>Improves service by communicating and assisting individuals to understand guest needs, providing guidance, feedback, and individual coaching when needed.</li> <li>Sets a positive example for guest relations.</li> <li>Emphasizes guest satisfaction during all departmental meetings and focuses on continuous improvement.</li> <li>Empowers employees to provide excellent customer service.</li> <li>Handles guest problems and complaints.</li> <li>Interacts with guests to obtain feedback on product quality and service levels.</li> </ul> <p><strong>Managing and conducting human resource activities</strong></p> <ul> <li>Identifies the developmental needs of others and coaches, mentors, or otherwise helps others to improve their knowledge or skills.</li> <li>Participates in training restaurant staff on menu items including ingredients, preparation methods and unique tastes.</li> <li>Manages employee progressive discipline procedures.</li> <li>Participates in the employee performance appraisal process, providing feedback as needed.</li> <li>Uses all available on the job training tools for employees.</li> <li>Assists as needed in the interviewing and hiring of employee team members with appropriate skills.</li> </ul> <p><strong>Additional responsibilities</strong></p> <ul> <li>Provides information to supervisors, co-workers, and subordinates by telephone, in written form, or in person.</li> <li>Analyzes information and evaluates results to choose the best solution and solve problems.</li> <li>Attends and participates in all pertinent meetings.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>USAF equivalent position is Avionics Technician Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li> <li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li> <li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs.</li> <li>Uses common and complex test instruments in the performance of assigned duties.</li> <li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li> <li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li> <li>Must be able to work with limited supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft avionics and/or GCS maintenance experience required.</li> <li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li> <li>Must have basic knowledge of RFF systems, components, and accessories.</li> <li>Must possess general understanding of technical publications related to aircraft electronics maintenance.</li> <li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li> <li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li> <li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Current IAT Level II Certification.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 experience as an avionics technician.</li> <li>Avionics technician experience within the last 10 years.</li> </ul> <h4>Compensation details</h4> <p>34.35</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting</h4> <p>06/02/2026 - 06/06/2026</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under federal laws and supplemental language at labor laws posters.</p></p><p></p>