وظائف فترة مسائية في الكويت

<p><strong>Job Summary:</strong> Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p>The Aviation Life Support Equipment (ALSE) Technician serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices. Principal Accountabilities • Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications. • Inspects, instructs, services and certifies individual and crew equipment • Order, receive and inventory kits and components • Resolve shipping discrepancies • Ensure proper fit of crew member clothing • Maintain ALSE and NVD for DoS and DI personnel • Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals • Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment • Perform other duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School diploma or equivalent is required.</li><li>One (1) year verifiable experience as an ALSE technician.</li><li>Must possess a certificate of training as a school trained ALSE Technician.</li><li>Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.</li><li>Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.</li></ul><p>Knowledge &amp; Skills</p><ul><li>CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred)</li><li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation</li><li>Must be able to ascertain LSE requirements for a multi-type aircraft environment</li><li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures</li><li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures</li><li>Must have knowledge of aviation maintenance data systems and associated documentation/forms</li><li>Must have knowledge of life support equipment maintenance tools and tool control procedures</li><li>Must knowledgeable of principles of instruction</li><li>Must have knowledge of seat kit survival components</li><li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance</li><li>The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment</li><li>Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day</li><li>Must be able to climb stairs, ramps, and ladders and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to carry, push or pull up to 50 pounds</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet</li><li>Must be able to communicate by voice and detect sounds</li><li>Must be able to distinguish color and judge three dimensional depths</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet</li><li>Be able to travel to and between remote location(s)</li><li>Travel to austere or inhospitable high stress environments may be required</li><li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required</li><li>May be exposed to extreme noise from turbine and jet engine aircraft</li><li>May be exposed to fumes or airborne particles</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft</li><li>Will be exposed to surface obstructions (ladders, stairs, etc)</li><li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li></ul>

<p>The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Major Job Activities Description: Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level battery maintenance functions as required per applicable maintenance manuals. Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR Performs scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment (life rafts, first aid kits, etc..), pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated aviation life support equipment, airframes, and power plants systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Conducts off station maintenance when required. When necessary, perform other duties and functions critical to the support of the program.</p><p>Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p><p>Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p><p><strong>Desired Candidate Profile</strong></p><p>Education / Certifications:<br>- High School Diploma<br>- Must be able to obtain/maintain the following required certifications/qualifications:<br>- Aviation Gas Free Engineering (AVGFE) certification<br>- Auxiliary Power Unit (APU) run qualification<br>- I Level Battery Maintenance certification<br>- Applicable Support Equipment licensing<br>- Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification<br>- Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification<br>- Corrosion Prevention and Control qualification<br>- Confined Space Entry certification<br>Experience:<br>Four years maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred.<br>Must have a working knowledge of first aid procedures to be used in an emergency.<br>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).<br>Specific Requirements:<br>Must be United States (U.S.) citizen, be able to read, write, and understand the English language<br>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.<br>Must be able to obtain and maintain at a Secret Security Clearance.<br>Must have a valid U.S. Driver s License.<br>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.<br>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.<br>Must be willing and able to comply with all program functional requirements to include but not limited to:<br>The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.<br>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.<br>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.<br>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.<br>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to:<br>The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance.<br>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O and I level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs.<br>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed.<br>Must have an in-depth knowledge of aircraft technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.<br>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.<br>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.<br>Must perform as a team member, contributing to the success of the C-130J maintenance department.<br>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.<br>Must have a proven ability to work independently with minimal direction.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Job Details / Position Summary The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness. Description: • Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform.• Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data• Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.• Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals.• Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications.• Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins.• Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. • Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance.• Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system.• Performs close tolerance adjustment, repair and rework of equipment in and out of shop area.• Services, inspects and tests aviation support equipment used for direct and indirect aircraft support.• Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type.• Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE).• Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment.• Conducts off station maintenance when required.• When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: • High School Diploma • Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: + “I” Level &amp; “O” Level Tire &amp; Wheel certification + Hydraulic Contamination certification + Collateral Duty Inspector (CDI) qualification + Corrosion Prevention and Control and Aircraft Paint qualification + “I” Level Battery Maintenance certification Experience: • Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. • Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. • Must be United States (U.S.) citizen , be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Have a strong knowledge base of intermediate level maintenance business practices and procedures • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” level, “I” level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance. • Must have an in-depth knowledge of applicable technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program. • Must be willing and able to work with hazardous materials and conduct specialty on-the-job training. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Launch Your Career as a Field Engineer with Weatherford</strong> &nbsp;</p><br><p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our&nbsp;cutting-edge&nbsp;technologies and the real-world challenges faced in oil and gas rigs. &nbsp;</p><br><p>This is more than just a job —&nbsp;it’s&nbsp;an adventure.&nbsp;You’ll&nbsp;be working in the field, often at remote rig sites, where&nbsp;you’ll&nbsp;gain unmatched experience and responsibility from day one. Whether&nbsp;it’s&nbsp;assembling equipment, analysing data, or solving problems on the fly,&nbsp;you’ll&nbsp;be at the heart of operations that matter. &nbsp;</p><br><p><strong>Your Development Journey</strong> &nbsp;</p><br><p>You’ll&nbsp;be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: &nbsp;</p><br><ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global&nbsp;centers. Travel may be needed to gain real-world experience&nbsp;</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training&nbsp;</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients&nbsp;</li></ul><p><strong>Your day-to-day could include: </strong>&nbsp;</p><br><ul> <li>Prepare, deploy, and&nbsp;operate&nbsp;advanced downhole tools to meet specific wellsite objectives&nbsp;</li> <li>Utilize&nbsp;cutting-edge&nbsp;simulation software to design and&nbsp;optimize&nbsp;wellsite solutions tailored to client needs&nbsp;</li> <li>Analyse performance data and recommend improvements &nbsp;</li> <li>Manage equipment&nbsp;logistics&nbsp;and ensure seamless setup and operation at the rig site&nbsp;</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams&nbsp;</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance&nbsp;</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently&nbsp;</li></ul><p>&nbsp;<strong>What&nbsp;We’re&nbsp;Looking For</strong> &nbsp;</p><br><ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months&nbsp;</li> <li>No more than 1 year of experience&nbsp;</li> <li>English language fluent&nbsp;proficiency&nbsp;(written and spoken)&nbsp;</li> <li>Strong communication&nbsp;and interpersonal skills&nbsp;</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions&nbsp;</li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore)&nbsp;</li></ul><p><strong>What to Expect</strong> &nbsp;</p><br><p>This role is physically and mentally demanding.&nbsp;You’ll&nbsp;work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if&nbsp;you’re&nbsp;up for the challenge, the rewards are big. &nbsp;</p><br><p>You’ll&nbsp;join one of our specialized product lines, such as: &nbsp;</p><br><ul> <li>Completions &nbsp;</li> <li>Drilling Services &nbsp;</li> <li>Wireline Services &nbsp;</li> <li>Artificial Lift &nbsp;</li> <li>Well Services &nbsp;</li> <li>Managed Pressure Drilling…and many more &nbsp;</li></ul><p><strong>Why Join Us?</strong> &nbsp;</p><br><ul> <li>Fast-track your career with structured development and mentorship &nbsp;</li> <li>Work with&nbsp;cutting-edge&nbsp;technology in real-world settings &nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services &nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more &nbsp;</li></ul><p>Ready to engineer your future? Apply now and start your journey with Weatherford&nbsp;</p><br><br> </div>

<p>USI Global Recruitment is hiring experienced PICU and NICU Registered Nurses for a specialised paediatric homecare programme in the Republic of Ireland.</p><p> POSITION: PICU REGISTERED NURSE</p><p>Key Requirements:</p><ul><li><p>Minimum 4 years of post-qualification paediatric nursing experience</p></li><li><p>Minimum 1 year of PICU experience</p></li><li><p>Experience working in a large acute, tertiary referral or metropolitan hospital with 250+ beds</p></li><li><p>Experience providing 1:1 nursing care to critically ill children</p></li><li><p>Strong clinical knowledge and confidence in managing complex paediatric cases</p></li></ul><p> POSITION: NICU REGISTERED NURSE</p><p>Key Requirements:</p><ul><li><p>Minimum 1 year of NICU experience</p></li><li><p>Minimum 4 years of acute paediatric nursing experience</p></li><li><p>Experience providing 1:1 nursing care to critically ill infants</p></li><li><p>Previous PICU or acute paediatric nursing experience</p></li><li><p>Experience in ED, HDU, acute medical or surgical units is desirable</p></li><li><p>Ability and confidence to work independently in a paediatric homecare environment</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>DESIRABLE EXPERIENCE</p><p>Candidates with any of the following experience will be considered favourably:</p><ul><li><p>Overseas PICU/NICU experience</p></li><li><p>Adult ICU/HDU experience</p></li><li><p>Previous paediatric homecare nursing experience</p><p>SALARY & BENEFITS</p></li><li><p>Salary: €38,000 – €47,000 per annum, depending on experience</p></li><li><p>Additional pay for night shifts, Sundays and public/bank holidays</p></li><li><p>3-year employment contract</p></li><li><p>39 hours per week</p></li><li><p>Location: Republic of Ireland – Nationwide</p></li></ul><p>ELIGIBILITY</p><ul><li><p>NMBI registration is mandatory</p></li><li><p>Relevant paediatric nursing experience is required</p></li><li><p>Candidates must meet the professional and employment requirements applicable to nursing roles in Ireland</p></li></ul><p>OTHER UK & IRELAND OPPORTUNITIES</p><p>USI Global Recruitment is also recruiting for:</p><ul><li><p>HGV / LGV / Bus / Car Mechanics</p></li><li><p>Vehicle Spray Painters</p></li><li><p>Fabricators</p></li><li><p>CNC Programmers & Operators</p></li><li><p>TIG / MIG / ARC Welders</p></li><li><p>Chefs</p></li><li><p>Vehicle Panel Beaters</p></li></ul><p>HOW TO APPLY</p><p>Interested and eligible candidates can share their updated CV with USI Global Recruitment for suitable UK and Ireland opportunities.</p><p>USI Global Recruitment</p><p>Connecting Skilled Professionals with International Career Opportunities.</p>

<p><h4>About Four Seasons:</h4> <p>Four Seasons is powered by our people. We are a collective of individuals who crave to become better, to push ourselves to new heights and to treat each other as we wish to be treated in return. Our team members around the world create amazing experiences for our guests, residents, and partners through a commitment to luxury with genuine heart. We know that the best way to enable our people to deliver these exceptional guest experiences is through a world-class employee experience and company culture.</p> <p>At Four Seasons, we believe in recognizing a familiar face, welcoming a new one and treating everyone we meet the way we would want to be treated ourselves. Whether you work with us, stay with us, live with us or discover with us, we believe our purpose is to create impressions that will stay with you for a lifetime. It comes from our belief that life is richer when we truly connect to the people and the world around us.</p> <h4>About the location:</h4> <p>A resort-like sanctuary in Kuwait’s heart. Discover a modern urban sanctuary in the heart of Kuwait City: a contemporary curation of Middle Eastern architecture, dazzling art and resort-like spaciousness, where striking sculptures seamlessly merge with traditional design. In this enclave of wonder – the first and only hotel in Kuwait to receive the prestigious Forbes Five-Star rating – you’ll find soaring rooftop restaurants, leisure facilities and the city’s largest guest rooms. Catch up with friends in the chic surrounds of Al Soor (known as La Chocolaterie of Kuwait), relax in air-conditioned cabanas by the infinity pool, ascend to a buzzing rooftop and wander the lush adjacent parkland. And with the city’s malls and souks within a few minutes’ drive, you can experience all the spoils of the city without spoiling your precious relaxation time.</p> <h4>What you will do</h4> <li>Welcome and seat guests promptly while managing reservations and table assignments.</li> <li>Ensure restaurant, tables, and menus are clean, properly set, and guest-ready before each shift.</li> <li>Maintain station charts, cover counts, and assist with guest preferences using the reservation system.</li> <li>Provide menu knowledge, handle inquiries, and address guest concerns with professionalism.</li> <li>Assist with food & beverage service when required and support colleagues in daily operations.</li> <li>Uphold Four Seasons service standards, safety procedures, and work harmoniously with the team.</li> <h4>What you bring</h4> <li>Fluent in spoken and written English.</li> <li>Strong multitasking, communication, and problem-solving skills.</li> <li>Excellent telephone manner and guest service focus.</li> <h4>What we offer</h4> <li>Full board shared living accommodation in a high quality, well-resourced compound</li> <li>Complimentary nights at FS Hotels worldwide</li> <li>Regular social and sporting events</li> <li>Paid home leave tickets</li> <li>Quality employee meals</li> <li>Free transportation to and from work</li> <li>High speed Wi-Fi internet in accommodation and employee transportation buses</li> <h4>Work authorization</h4> <p>Hotel will apply for the work authorization for the successful candidate.</p> <p>We look forward to receiving your application!</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p></p></section>

<p>Burgan Drilling Company is expanding its operations and is seeking experienced and motivated professionals to join our drilling teams. We are currently recruiting for the following positions:</p><p><strong>Senior Drilling Crew:</strong></p><ul><li>Rig Manager/ Sr. Tool Pusher</li><li>Night Tool Pusher</li><li>Driller</li><li>Assistant Driller</li><li>Chief Electrician</li><li>Chief Mechanic</li><li>Safety Officer</li></ul><p><strong>Junior Drilling Crew:</strong></p><ul><li>Derrickman</li><li>Floorman</li><li>Assistant Electrician</li><li>Assistant Mechanic</li></ul><p>Minimum Requirements:</p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li></ul><p>Preferred Experience:</p><ul><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul><p>Interested candidates are invited to submit their updated CV, clearly indicating the position applied for with total years of drilling experience, rig types worked on, current location, availability with IWCF/Well Sharp Validity details.</p><p>Note: Only shortlisted candidates who meet the required qualifications and experience will be contacted.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Minimum Requirements:</b></p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li></ul><p>Preferred Experience:</p><ul><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul>

<p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p></p></section>

<p><h4>About Four Seasons:</h4> <p>Four Seasons is powered by our people. We are a collective of individuals who crave to become better, to push ourselves to new heights and to treat each other as we wish to be treated in return. Our team members around the world create amazing experiences for our guests, residents, and partners through a commitment to luxury with genuine heart. We know that the best way to enable our people to deliver these exceptional guest experiences is through a world-class employee experience and company culture.</p> <p>At Four Seasons, we believe in recognizing a familiar face, welcoming a new one and treating everyone we meet the way we would want to be treated ourselves. Whether you work with us, stay with us, live with us or discover with us, we believe our purpose is to create impressions that will stay with you for a lifetime. It comes from our belief that life is richer when we truly connect to the people and the world around us.</p> <h4>About the location:</h4> <p>A resort-like sanctuary in Kuwait’s heart. Discover a modern urban sanctuary in the heart of Kuwait City: a contemporary curation of Middle Eastern architecture, dazzling art and resort-like spaciousness, where striking sculptures seamlessly merge with traditional design. In this enclave of wonder – the first and only hotel in Kuwait to receive the prestigious Forbes Five-Star rating – you’ll find soaring rooftop restaurants, leisure facilities and the city’s largest guest rooms. Catch up with friends in the chic surrounds of Al Soor (known as La Chocolaterie of Kuwait), relax in air-conditioned cabanas by the infinity pool, ascend to a buzzing rooftop and wander the lush adjacent parkland. And with the city’s malls and souks within a few minutes’ drive, you can experience all the spoils of the city without spoiling your precious relaxation time.</p> <h4>What you will do</h4> <li>Welcome and seat guests promptly while managing reservations and table assignments.</li> <li>Ensure restaurant, tables, and menus are clean, properly set, and guest-ready before each shift.</li> <li>Maintain station charts, cover counts, and assist with guest preferences using the reservation system.</li> <li>Provide menu knowledge, handle inquiries, and address guest concerns with professionalism.</li> <li>Assist with food & beverage service when required and support colleagues in daily operations.</li> <li>Uphold Four Seasons service standards, safety procedures, and work harmoniously with the team.</li> <h4>What you bring</h4> <li>Fluent in spoken and written English.</li> <li>Strong multitasking, communication, and problem-solving skills.</li> <li>Excellent telephone manner and guest service focus.</li> <h4>What we offer</h4> <li>Full board shared living accommodation in a high quality, well-resourced compound</li> <li>Complimentary nights at FS Hotels worldwide</li> <li>Regular social and sporting events</li> <li>Paid home leave tickets</li> <li>Quality employee meals</li> <li>Free transportation to and from work</li> <li>High speed Wi-Fi internet in accommodation and employee transportation buses</li> <h4>Work authorization</h4> <p>Hotel will apply for the work authorization for the successful candidate.</p> <p>We look forward to receiving your application!</p></p><p></p>

<p><br></p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>Drilling Operations:</strong> Ensures the safety of personnel, equipment, and the efficiency of operations on the drill floor and other drilling operation associated areas. Plans and schedules all drilling and associated activity. Directs personnel towards achieving optimum job performance according to the client s requirements. Ensures any deviation from client well plan (Game Plan) is approved by STP, and that Client representative has documented in written form, and that necessary management of change or deviation is approved in Synergi prior to operation starts. Consult with the STP and Client s Representative regarding the progress of the Drilling program and associated operations, keeping the driller informed about the ongoing drilling program objectives and communicating any changes in plans. Ensure that space-out drawings are correct and are posted in the drillers cabin. Overseeing that post-jarring sheet are filled out and understood by the driller. Relieve the Driller at the Driller s console as operational requirement demands. Ensures that all necessary equipment is ready for the next phase of the Drilling / Workover program and that necessary rig procedures, including JSA and PTW, are prepared on time and with good quality for the actual operations. Assists &amp; supervises drilling crew at the location at all relevant times, ensuring circulating time is sufficient and the well is stable on trips, when the BHA is being worked and whenever there is a hole problem. Operates the drilling unit with strict adherence to company Drilling &amp; Well Control manuals, by reviewing and approving all drilling related work permits.</p><p><strong>Well Control:</strong> Ensure that well control requirements are in place according to operational requirements - assist in supervising well killing operations in any well control situation. Plans &amp; monitors comprehensive well control parameters to proactively identify any signs of well control issues for early detection and swift response. Maintains and regularly tests well control equipment, in accordance with Company s and Client s requirement, ensuring its readiness and effectiveness in critical situations. Perform all well control calculations (i.e., mud weight increase, initial and final circulating pressures, number of strokes, etc.).</p><p><strong>Management of Major Emergencies:</strong> To be part of the Rig s Emergency Response Team as detailed in the Emergency Plan and Company Procedures. Ensure that all personnel are instructed in the procedures to be adopted in the case of an emergency. Ensure that Well Control and general safety drills are held and recorded in accordance with Company requirements.</p><p><strong>Materials &amp; Equipment:</strong> Assist STP in ensuring the location has sufficient stock of parts and materials to perform drilling and associated operations as per contractual requirements. Ensure planned maintenance and repair of drilling equipment including draw-works, mud pumps, top drive, rotary table, and BOP are completed and documented to ensure optimum condition and proper availability of required tools. Responsible for housekeeping standards in all drilling areas, sack store and mud pump room.</p><p><strong>Rig Move:</strong> Support STP in planning all related rigs move activities, equipment, supplies, personnel in compliance with the Rig move Procedures. Assesses the current and new location, considering factors such as safety, lifting equipment availability at location, preparation for rig-up operations, Supervise the Rig move team during rigging down and rigging up activities to ensure they are followed efficiently and safely.</p><p><strong>Client Management:</strong> Develops and maintains positive working relationships with other department heads, supervisors, operator's representatives, subcontractors, and all personnel on the rig. Responds to client requests and needs concerning materials, equipment, and personnel after getting adequate management approval.</p><p><strong>Reporting and Documentation:</strong> Maintains proper logs and records, promptly submitting required reports as per company protocols and regulatory standards. Prepare accurate and timely reports, including daily drilling reports, equipment status reports and incident reports, to document drilling activities and operational performance. Review all operational/technical bulletins, communicate pertinent points to crew members and implement all directives as required. Assist STP in initiating, monitoring, and recording all maintenance and repairs work in collaboration with maintenance department.</p><p><strong>People Management &amp; Development:</strong> Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work. Mentor, develop and train their team to ensure safe and effective operations. Identifies opportunities for skill and career advancement, works to support the professional growth of their team members. Ensure their team receives the necessary required training to perform their duties safely and effectively through on-the-job training, classroom training and participation in safety drills and exercises. Support, promote and actively participate in ADES s Competency Assurance Program for their team. Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive ADVANCE process to formalize a performance management culture.</p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Minimum education level required: High School or Vocational/Technical Qualification. Minimum (8) years of working experience in land drilling and workover operations with contractors with a career history showing time served as Assistant Driller, Driller, and Tool pusher. Must have working experience on Onshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in English (written &amp; spoken). PC literate in Microsoft Office Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids. Leadership, Situation Awareness, Communication, Teamwork, Performance shaping factors stress and fatigue, inspecting work.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat etc.). Ability to work on day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix. Valid Well Control (Well Sharp / IADC) Certificate.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Experience:</strong> Minimum education level required: High School or Vocational/Technical Qualification. Minimum (8) years of working experience in land drilling and workover operations with contractors with a career history showing time served as Assistant Driller, Driller, and Tool pusher. Must have working experience on Onshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in English (written &amp; spoken). PC literate in Microsoft Office Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids. Leadership, Situation Awareness, Communication, Teamwork, Performance shaping factors stress and fatigue, inspecting work.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat etc.). Ability to work on day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix. Valid Well Control (Well Sharp / IADC) Certificate.</p>

<p>POSITION SUMMARY Patrol all areas of the property; assist guests with room access. Monitor Closed Circuit Televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests/employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest/employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all Security/Loss Prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents/thefts. Call for assistance using proper code responses. Complete a Loss Prevention shift summary/daily activity report. Maintain confidentiality of all Security/Loss Prevention and property reports/documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties. Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; prepare and review written documents accurately and completely. Develop and maintain positive working relationships with others; support team to reach common goals. Comply with quality assurance expectations and standards. Stand, sit, or walk for an extended period of time. In addition, some states may have additional licensing/registration requirements to be considered for this position. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Move at a speed required to respond to work situations (e.g., run, walk, jog). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent.</p><p>Related Work Experience: No related work experience.</p><p>Supervisory Experience: No supervisory experience.</p><p>License or Certification: None</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Aviation Life Support Equipment (ALSE) Technician serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices. Principal Accountabilities Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications. Inspects, instructs, services and certifies individual and crew equipment Order, receive and inventory kits and components Resolve shipping discrepancies Ensure proper fit of crew member clothing Maintain ALSE and NVD for DoS and DI personnel Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment Perform other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma or equivalent is required.</li><li>One (1) year verifiable experience as an ALSE technician.</li><li>Must possess a certificate of training as a school trained ALSE Technician.</li><li>Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.</li><li>Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.</li></ul><p>Knowledge &amp; Skills</p><ul><li>CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred)</li><li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation</li><li>Must be able to ascertain LSE requirements for a multi-type aircraft environment</li><li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures</li><li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures</li><li>Must have knowledge of aviation maintenance data systems and associated documentation/forms</li><li>Must have knowledge of life support equipment maintenance tools and tool control procedures</li><li>Must knowledgeable of principles of instruction</li><li>Must have knowledge of seat kit survival components</li><li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance</li><li>The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment</li><li>Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day</li><li>Must be able to climb stairs, ramps, and ladders and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to carry, push or pull up to 50 pounds</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet</li><li>Must be able to communicate by voice and detect sounds</li><li>Must be able to distinguish color and judge three dimensional depths</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet</li><li>Be able to travel to and between remote location(s)</li><li>Travel to austere or inhospitable high stress environments may be required</li><li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required</li><li>May be exposed to extreme noise from turbine and jet engine aircraft</li><li>May be exposed to fumes or airborne particles</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft</li><li>Will be exposed to surface obstructions (ladders, stairs, etc)</li><li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li></ul><p></p></section>

<p>Serving as a focal point between the hospital departments and the clients. Maintaining a positive, empathetic, and professional attitude toward the clients at all times. Ensuring clients are properly greeted and welcomed at the reception desk. Providing accurate information as requested by clients at the desk or over the phone. Directing clients according to their respective queries/departments. Helping clients in rescheduling/modifications of appointments. Managing patient complaints in recording, and sending it to the concerned to resolve. Listen to customers concerns, issues and questions. Resolve customers concerns and answer customers questions to the best possible way. Following up with patients to ensure their inquiry or complaint has been satisfactorily resolved. Responsible for managing patient reward system. Responsible for maintaining a clean and safe work environment. Maintain a working knowledge of department policies and procedures. Secure everything at Information and Services desk at the end of each shift. Performing administrative and clerical duties, such as filing paperwork, when necessary. Others as assigned by the department manager.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in business management or any related field. At least 4 years of related work experience. Customer service oriented personality. Stress tolerance. Excellent organizational skills and attention to detail. Excellent verbal and written communication skills. Proficient in Microsoft Office Suite.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Veolia</strong>, a global leader in resource management, seeks a <strong>Control Room Operator</strong> for our <strong>Sulaibiya Waste Water Treatment &amp; Reclamation Plant</strong> in Kuwait.</p><br><p>We specialize in innovative wastewater treatment and reclamation solutions, guided by our values of Responsibility, Solidarity, Respect, Innovation, and Customer Focus.</p><br><p>With a global workforce of 179,000, we're committed to sustainable development and optimizing resources. Join our team at this cutting-edge facility to contribute to environmental sustainability and water management in Kuwait.</p><br><p>At Veolia, you'll work on impactful projects, enjoy growth opportunities, and be part of our mission to lead the ecological transformation in wastewater treatment and reclamation.</p><br><br>Job Description<br><p><strong>Role</strong></p><br><p>Control Room Operator is responsible for the safe and smooth operation of UF/RO reclamation plant, will be part of operation team and will work on shift duty along with process leader. Responsibilities include – but not limited to - monitoring UF/RO system &amp; plant utilities, O&amp;M procedures and activities, evaluating treatment process/plant conditions, report operation conditions and findings, and making process control decisions in coordination with process leader. Control room operator shall work closely and coordinate with process leader, Operation manager and other maintenance discipline supervisors to ensure smooth and effective operation of reclamation plant and to sustain overall plant performance.</p><br><p><strong>RESPONSIBILITIES:</strong></p><br><p>The Control Room Operator shall perform the following and any other tasks as per work requirements:</p><br><ul><li>The position will be functionally reporting to Field Service Lead and one over one to Operation manager.</li><li>Reviews process control operation through inspection of system and plant records, technical data, operating reports and historical trends.</li><li>Investigates, diagnoses, report, and recommends correction of abnormalities occurring in any part of the</li><li>UF/RO plant system or Process or plant utilities to ensure safe operation of the plant as per the stated procedures.</li><li>Shares and escalate the operational observations pertaining to the UF/RO plant process or system control operation to ensure the economical functioning of plant facilities, coordinating operational strategies with Field Service Lead or Manager.</li><li>Responsible for reporting shift operational activities to Field Service Lead and operation manager.</li><li>Responsible for creating safe working area by isolating the equipment/system from potential hazardous source and to authorize work executor to start the work by applying LOTO devices, the execution of the work shall be followed until the completion of the job.</li><li>Responsible for measuring individual UF skid turbidity and RO individual vessel conductivity and maintains records for future reference and control.</li><li>Regular updates to Field Service Lead and Manager and make routine plants walk round to notice any plant anomalies before in time. Responsible for reporting the shift activities to concern discipline responsible for corrective actions.</li><li>Routine monitoring of static and rotary equipment and initiate necessary maintenance works to avoid equipment malfunctioning &amp; damages.</li><li>To work closely with client control room operators to maintain good relationship while on executing the assigned or common tasks.</li><li>Execute assigned tasks efficiently as per the instruction given based on plant process requirement and update the status periodically.</li><li>Responsible for communicate with other discipline responsible on equipment isolation and to initiate the maintenance works, follow up the works until the completion of works.</li><li>Writes comprehensive reports on process control operations as necessary to provide information as may be required by management.</li><li>Demonstrates continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality service.</li><li>Plan and initiate chemical preparation and perform lab analysis deemed necessary for the plant smooth operation and work closely with chemical department on timely and safe completion of chemical preparation,&nbsp;loading &amp; unloading of chemicals.</li><li>Reviews all chemical usage to determine correct chemicals, doses, and application points; carry out necessary tasks related to chemical and water analysis based on process requirement.</li><li>Monitoring of process parameters, online instruments and individual system performances through plant automation system and initiate necessary action.</li><li>Assist Field Service Lead on investigating &amp; troubleshooting the process disturbances, equipment malfunctioning and notify the concern department responsible in time for necessary actions.</li><li>Write shift activities clearly and organized manner in shift log book and the shift activities shall distinctly communicated to shift reliever for further follow-up.</li><li>Responsible for maintaining daily activity log like CIP activity log, Refill chemical log, daily analysis log, etc..</li><li>Apply and follow plant EHS procedures including handling of hazardous chemicals, confined space activities, chemical spill control, LOTO procedure and evacuation &amp; emergency procedures.</li><li>Optimize and assist with the development of operational quality system procedures/guidelines/documents for&nbsp;Water Treatment.</li><li>Ensures to adheres to EHS &amp; Quality processes and procedures, Checks job sites for potential hazards and reports when things against company policies.</li><li>Maintains appropriate housekeeping for plant facilities cooperating with other departments.</li><li>Ability to work independently most of the time, but report to his supervisors.</li><li>Determine the reasons for any malfunctions of systems or components to solve the problem.</li></ul><br>Qualifications<br><p><strong>Q</strong><strong>U</strong><strong>A</strong><strong>LIFICATION &amp; REQUIREMENTS:</strong></p><br><ul><li>Bachelor’s degree in Chemistry or equivalent. Other combinations of experience and education that meet the&nbsp;minimum requirements will be considered</li><li>Work experience of minimum 3-5 years in Waste Water Treatment and Reclamation plant</li><li>Proven experience in UF and RO membrane technology</li><li>Experience in plant automation system like DCS, SCADA and PLC is essential</li><li>Knowledge on plant safety and EHS</li><li>Good communication skills in English. Arabic knowledge advantageous.</li></ul><br>Additional Information<br><p><strong>DESIRED CHARESTERICTS</strong></p><br><ul><li>Ability to work per priority, dealing with complexity and result driven</li><li>Experience in working with small group of team members</li><li>Work experience in any large Water treatment plant process, Chemical, O&amp;G plants or Power plants.</li><li>Shall possess excellent interpersonal skills and shall be a good team player</li></ul><p><strong>As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.</strong></p><br><br><br> </div>

<div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Patrol all areas of the property; assist guests with room access. Monitor Closed Circuit Televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests/employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest/employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all Security/Loss Prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents/thefts. Call for assistance using proper code responses. Complete a Loss Prevention shift summary/daily activity report. Maintain confidentiality of all Security/Loss Prevention and property reports/documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.</p> <p> </p> <p>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; prepare and review written documents accurately and completely. Develop and maintain positive working relationships with others; support team to reach common goals. Comply with quality assurance expectations and standards. Stand, sit, or walk for an extended period of time. In addition, some states may have additional licensing/registration requirements to be considered for this position. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Move at a speed required to respond to work situations (e.g., run, walk, jog). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p><b>PREFERRED QUALIFICATIONS</b></p> <p>Education: High school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: No related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p> <p> </p> <p> </p> </div> <div> </div> <p> <i>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</i> </p>