وظائف رسام كهربائي في الكويت

Additional Information<br><br>Job Number 26115032<br><br>Job Category Engineering & Facilities<br><br>Location Abdel Moneim Ryadh Street, Kuwait City, Kuwait, Kuwait, 26302VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.<br><br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br><br>Preferred Qualifications<br><br>Education: Technical, Trade, or Vocational School Degree.<br><br>Related Work Experience: At least 3 years of related work experience.<br><br>Supervisory Experience: No supervisory experience.<br><br>Required Qualifications<br><br>License or Certification: EPA Universal Certification<br><br>Driver's License<br><br>HVAC Certification<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br><br>The world is a big place and Marriott Executive Apartments offers temporary housing that feels like home in the biggest and best cities for business travel across Europe, Asia, Latin America, Africa and the Middle East. Join the Marriott Executive Apartments team and help our guests adapt to a new locale and feel comfortable and cared for while living away from home. In joining Marriott Executive Apartments, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Position requires thorough knowledge of engineering design, engineering techniques, exceptional leadership and project managements skills. Responsible to manage the engineering, inspection and surveyors’ teams. Utilize best practice engineering methods and provides expert technical guidance for engineering initiatives. Run all the engineering activities within the organization and make sure these are aligned with the established policies and objectives of Vectrus. Plan and conduct independent work, requiring judgment in the evaluation, selection, application and adaptation of engineering techniques, procedures and criteria. Devise new approaches to problems, and monitor work for compliance to applicable codes, accepted engineering practices, Vectrus Safety Procedures and ASG-KU Standards. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Provide technical guidance to engineering, inspectors and surveyor’s teams + Direct and manage inspections for construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, operational safety standards and customer requirements. + Review detailed designs. + Provide advice and resolve creatively any emerging problems/deficiencies. + Oversee and mentor staff and liaise with a variety of stakeholders. + Comply with guidelines and regulations including permits, safety etc. and deliver technical files and other technical documentation as required. + Implementing best practice engineering methods. + Inspect completed installations and observe operations, to ensure conformance to design and equipment specifications and compliance with operational and safety standards. + Support establish of organizational objectives by developing goals and strategies. + Compile data and write reports regarding existing and potential civil studies and projects. + Assessing the potential risks of specific projects, as well as undertaking risk management in specialist roles. + Generating Statements of Work and reviewing Subcontractor Technical Proposals for accuracy and acceptance. + Assist and/ or confer with engineers, customers, and others in developing programs for new projects or plan existing major repair projects. + Direct and/or participate in job site visits to collect or deliver design and engineering data. + The analysis for the approval or disapproval in writing of submittals and materials. In case of disapproval, follow-up with the relevant department to reach the correction of the deficiency found. + Shall work special projects as assigned. + Performs other duties and assignments as required. Qualifications + Minimum Education: + BS/MA in a relevant engineering discipline. + Must possess a driver’s license from country of origin for the purpose of obtaining a Military or Kuwait driver’s license. + Experience: + Minimum 10 years’ experience relating to engineering managerial experience. + Five (5) years specialized experience operating managerial activities. + Ability to demonstrate and provide leadership and collaboration in diverse experiences to address operational methodologies in project planning and management and customer service PMP Certification. + Skills: + Knowledge of building mechanical codes, local Host Nation Codes, International Building Code (IBC) + Research UFC, US Army or other codes from standards as required by projects. + Technical competence + Strong numeracy and IT skills + Attention to detail, combined with the ability to oversee small and large projects + Excellent communication and team working skills + Knowledge of relevant legislation + Negotiation and leadership skills + High competency and demonstration of engineering skills. + High level of analytical and research skills translated and clearly expressed in written documents ranging from correspondence, statements of work, white papers and contribution to policy development. + A creative approach to problem-solving + Must be proficient in the use of MS Office (Word, Power Point, Excel and Outlook. + Candidate must possess professional interpersonal skills, as well as the ability to work independently, in a fast-paced environment with changing priorities. + Must have strong organizational and planning skills and manage workflow efficiently and accurately. + Capable of effectively communicating technical information in English, both written and verbal. + Knowledge of sustainable design practices + Physical Requirements + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. + Visual Acuity + The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. + Working Conditions: + The conditions the worker will be subject to in this position. (Please select all that apply) + The worker is subject to both environmental conditions. Activities occur inside and outside. + The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. + The worker is subject to vibration. Exposure to oscillating movements of the extremities or whole body. + The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Position requires thorough knowledge of engineering design, engineering techniques, exceptional leadership and project managements skills. Responsible to manage the engineering, inspection and surveyors’ teams. Utilize best practice engineering methods and provides expert technical guidance for engineering initiatives. Run all the engineering activities within the organization and make sure these are aligned with the established policies and objectives of Vectrus. Plan and conduct independent work, requiring judgment in the evaluation, selection, application and adaptation of engineering techniques, procedures and criteria. Devise new approaches to problems, and monitor work for compliance to applicable codes, accepted engineering practices, Vectrus Safety Procedures and ASG-KU Standards. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Provide technical guidance to engineering, inspectors and surveyor’s teams + Direct and manage inspections for construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, operational safety standards and customer requirements. + Review detailed designs. + Provide advice and resolve creatively any emerging problems/deficiencies. + Oversee and mentor staff and liaise with a variety of stakeholders. + Comply with guidelines and regulations including permits, safety etc. and deliver technical files and other technical documentation as required. + Implementing best practice engineering methods. + Inspect completed installations and observe operations, to ensure conformance to design and equipment specifications and compliance with operational and safety standards. + Support establish of organizational objectives by developing goals and strategies. + Compile data and write reports regarding existing and potential civil studies and projects. + Assessing the potential risks of specific projects, as well as undertaking risk management in specialist roles. + Generating Statements of Work and reviewing Subcontractor Technical Proposals for accuracy and acceptance. + Assist and/ or confer with engineers, customers, and others in developing programs for new projects or plan existing major repair projects. + Direct and/or participate in job site visits to collect or deliver design and engineering data. + The analysis for the approval or disapproval in writing of submittals and materials. In case of disapproval, follow-up with the relevant department to reach the correction of the deficiency found. + Shall work special projects as assigned. + Performs other duties and assignments as required. Qualifications + Minimum Education: + BS/MA in a relevant engineering discipline. + Must possess a driver’s license from country of origin for the purpose of obtaining a Military or Kuwait driver’s license. + Experience: + Minimum 10 years’ experience relating to engineering managerial experience. + Five (5) years specialized experience operating managerial activities. + Ability to demonstrate and provide leadership and collaboration in diverse experiences to address operational methodologies in project planning and management and customer service PMP Certification. + Skills: + Knowledge of building mechanical codes, local Host Nation Codes, International Building Code (IBC) + Research UFC, US Army or other codes from standards as required by projects. + Technical competence + Strong numeracy and IT skills + Attention to detail, combined with the ability to oversee small and large projects + Excellent communication and team working skills + Knowledge of relevant legislation + Negotiation and leadership skills + High competency and demonstration of engineering skills. + High level of analytical and research skills translated and clearly expressed in written documents ranging from correspondence, statements of work, white papers and contribution to policy development. + A creative approach to problem-solving + Must be proficient in the use of MS Office (Word, Power Point, Excel and Outlook. + Candidate must possess professional interpersonal skills, as well as the ability to work independently, in a fast-paced environment with changing priorities. + Must have strong organizational and planning skills and manage workflow efficiently and accurately. + Capable of effectively communicating technical information in English, both written and verbal. + Knowledge of sustainable design practices + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. + Visual Acuity: + The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. + Working Conditions: + The worker is subject to both environmental conditions. Activities occur inside and outside. + The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. + The worker is subject to vibration. Exposure to oscillating movements of the extremities or whole body. + The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Oversee all food services operations under the general guidance of the DFAC Area Manager. The DFAC Manager will direct all work and be responsible for performance in designated facility (to include subcontractors) to meet the specific performance requirements and standards in the Performance Work Statement (PWS). Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + DFAC Managers are midlevel managers who operate facilities that fluctuate between 500 to 5000 personnel per meal, manage between 40 – 90 personnel and can be used as floaters to cover shifts when managers have days off, vacations, sick or administrative appointments. + DFAC Managers will be responsible for receiving, storing and issuing CLASS I Operational Rations; conducting the 28-day menu and planning with the Government Food Service Advisor; Requisitioning and Acquisition of Subsistence from Prime Vendors and utilizing the System Total Ordering Ration Electronic Receipt system (STORES) and DSCP. + Responsible for storing all subsistence to ensure food items are sanitary and remain fresh before consumed; subsistence is not handled in any manner that exposes the food items to unsanitary conditions or environmental temperature and humidity conditions that could damage or spoil the subsistence; comply with Chapter 13 of FM 10-23-2, Tri-Service Food Code (TB MED 530) and all US Department Health and Human Services Food Code standards, and keep records of all food received and stored as required, verifying proper handling and storage procedures are used. + Manage supervisors and subcontractors with food preparation, food serving, cashier operations, cleanliness of the dining areas, serving lines, kitchens, temperature danger zones, dishwashing area and storage areas IAW with PWS, Work Instructions, Military regulations, pamphlets, guides, Tri-Service Food Code and SOPs. + Maintain all equipment accountability and serviceability; ensure proper cleaning and maintenance is being conducted. + Maintain proper turn-in and ordering of stockage levels of both consumable and non-consumable products. + Ensure that all employees are always in compliance with all established Policies and Regulations. + Direct and ensure that HACCP procedures are followed. + Performs other duties and assignments as required. Qualifications Minimum Qualifications: + + Must have a High School diploma or equivalent, Associate’s Degree preferred. + Must have and maintain a current Serve-Safe certification (Within 3 years). + Must be have a current, valid U. S. Passport and U. S. or Local Driver’s License. + Must be able to read, write, speak and understand English fluently. + Must be able to pass MOD18 employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc Experience: + + Must have a minimum of 10 years of large-scale food operation experience with a minimum of 4 years large-scale food operation management, preferably military food service. + Prefer military food service experience in the grade of Sergeant First Class (E-7) or above within the past ten (10) years, four (4) years must have been served as a manager or assistant manager. Skills: + + Should be knowledgeable in AFMIS, STORES, inventory control. HACCP, FM-10-23-2, DA Pam.30-22, AR. 30-22, TB MED 530, AR 40-25, AR 30-21, and U.S Department of Health and Human Services Food Code standards. + Thorough understanding of quality customer food service and preparation of nutritional meals. + Must be able to work under pressure. Service oriented. Material &amp; Equipment Directly Used: + + Desktop computer, scanners, printers, copiers, and other office related equipment. + Microsoft Office Programs ~ Mainly PowerPoint, Excel, and Word Physical Requirements: + + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. Visual Acuity: + + The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working Conditions: + + The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. + The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. + The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level. + The worker is subject to atmospheric conditions. One or more of the following conditions that affect the respiratory system of the skin: fumes, odors, dust, mists, gases, or poor ventilation. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Public Works Director, responsible for facilities engineering, maintenance, operations, and application of quality management programs within Public Works Operations and Maintenance (O&amp;M) activities. Works on solutions exercising independent judgment in developing methods, techniques and evaluation criteria for obtaining results for total program in concert with and at the direction of the Public Works Director. Administrator of the Public Works O&amp;M program(s), having full authority and responsibility for ensuring performance objectives and standards are met. The Facilities Operations &amp; Maintenance Manager (O&amp;M) or designated alternate shall be readily available on-site during regular working hours (the designated alternate manager shall be assigned by the Public Works Director from one of the Public Works Departments). Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Responsible for all operations aspects of implementing the contract including cost management, schedule management, data management, and other related operations and maintenance activities. + Ensures that the Public Works Organization properly receives, responds to, executes, and concludes all trouble calls, facility modification requests, and any other requests for special work, including identifying the work being requested, defining the scope of the work, making any necessary repairs, and/or identifying and receiving any required approvals to such work. + Ensures all Public Works activities are performed in accordance with all applicable laws, regulations, standards and codes imposed by the U.S. Government and all applicable agreements with the government of host nation. + Communicates professionally, both orally and in writing, with the Client, Task Order Manager, Deputy Task Order Manager, Sr. Director and subordinates, as needed, to relay information. This includes, but is not limited to, reports to the Client, subcontractors, staff meetings, performance appraisals, job requirements, + Infrastructure metrics, projects, Quality Standard Procedures, and safety practices. + Responsible for managing and leading lower level managers and employees performing facilities operations and maintenance related activities. + Develops and executes integrated corporate and departmental policies and procedures and provides input on departmental business and technical strategies, objectives and goals. + Acquires resources for activity, provides technical coordination of suppliers and leads process improvements. + Develops and maintains relationships and partnerships with customers, peers, stakeholders, and partners. + Provides oversight and approval of technical approaches, products and processes. + Ensures both prime and subcontractors abide by program, contractual, and industrial standards/best practices, where required, which meet the requirements of the contract. + Determines need and provides training for personnel to implement and complete projects as directed by the Public Works Director. + Participates in various program meeting/reviews and participates in formal briefings to both Customers and corporate management personnel. + Generates various reports/deliverables including monthly program status reports to the appropriate management personnel as required by the Public Works Director. + Develops and supports achievement of performance metrics for Public Works Activities. Reviews programs with subordinates to ensure a high degree of achievement + Performs Job Duties as assigned. Qualifications + Education/Experience Requirements: + Bachelor of Science (BS) degree in engineering or related technical field/discipline required. + Facility Management Professional or Project Management Professional desirable + Ability to obtain host nation driver license. + Must be CAC eligible and/or ability to obtain a CAC. + Experience: + 7 years of experience in facility engineering, Operations, and Maintenance of facility assets and utility infrastructure comparable to/being offered under this contract. + Experience in military environment preferred. + Skills + Must know or capable to gain an understanding of the operations and administration associated with the mission of the Public Works Directorate. + Knowledge of business and management principles involved in strategic planning, resource allocation, leadership technique, production methods, and coordination of people and resources. + Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. + Knowledgeable of how to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. + Requires a collaborative work style, fostering cooperation and teamwork. + Must exercise discretion and good sound judgment. + Must have high level of proficiency in the use of MS Office and/or other related applications. + The Facilities Operations &amp; Maintenance Manager must have strong capabilities in team building and personnel development. + Knowledge of customers (e.g. Department of Defense, United States Army Corps of Engineers and/or Department of State), as appropriate to the specific contract, is required. + Working Conditions: + Subject to extreme cold. Temperatures typically at or below 50 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. + Subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. + Subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for Fire Station daily operations to ensure personnel are well-trained and capable to perform their duties effectively and on short notice. Select and guide firefighters to perform as expected when called upon and will continually assess their readiness and performance. This assessment will maintain daily awareness of fire inspections, fire services, inspection and testing of fire protection and alarm systems, firefighter training, and fire drills. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Manage installation FES to include maintaining operating instructions, Master Plan, Standards of Coverage, manpower, equipment and supplies. + Develop and implement plans to cover for reduced operational capabilities; response, staffing, pollution prevention, safety of personnel, operational risk management + Manage compliance self-inspection program IAW Army Installation Command checklist ensuring requirements contained in Amy Regulation 420-1, Performance Work Statement, DoDI 6055.6 are continually maintained. + Manage and participate in the development and implementation of goals, objectives, policies, and priorities for assigned programs; recommend and administer policies and procedures; oversee and participate in the development of new fire ordinances. + Provide 24/7 FES to the installation. Services include on-scene incident management, aircraft rescue and firefighting, structural firefighting, response to hazardous materials, technical rescue to include auto extrication and confined space rescue and emergency medical services support. + Monitor and evaluate the efficiency and effectiveness of service delivery methods and procedures; recommend, within company policy, appropriate service and staffing levels. + Plan, direct, coordinate, and review the work plan for fire service staff; assign work activities, projects, and programs; review and evaluate work products, methods, and procedures; meet with staff to identify and resolve problems. + Select, train, motivate, and evaluate fire service personnel; provide or coordinate staff training; work with employees to correct deficiencies; implement discipline and termination procedures. + Ensure that equipment, safety clothing, apparatus, and supplies are specified, purchased, received, distributed in an effective and consistent manner. + Performs Job Duties as assigned. Qualifications Qualifications Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + + An Associate’s or higher degree in fire technology. + Meet position certifications IAW DoD Manual 6055.06 except also hold Fire Officer IV certification; Shipboard firefighter is preferred. + Must be a U.S. Citizen + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Driver’s License, is required. + Host nation Heavy Duty Driver’s License. Licenses/Certifications: + + International Fire Service Accreditation or Pro-Board Certifications - Fire Officer IV, Fire Instructor II, Fire Inspector II; HAZMAT Incident Commander, Airport Fire Fighter; Shipboard firefighter is preferred. + Must meet training and certification requirements outlined in DoD Manual 6055.06. Clearance: + + Clearance level required at start date: Secret Experience: + + Ten years fire protection experience + Three years at the Assistant Chief level. Supervisory/ Budget Responsibilities: + + Manages large department with multiple fire stations geographically dispersed and large number of personnel. Manages significant annual budget and also vehicle replacement programming and facility improvement planning. Skills: + + Must have experience directing firefighting operations to include fighting aircraft and structural fires, performing rescue services, and responding to hazardous materials incidents, medical emergencies, and confined space rescues. + Knowledge of the chemistry of fire, preventive maintenance and operations of firefighting and rescue equipment, physical and chemical properties of combustible materials and building structures and their component systems. + Experienced in managing fire prevention and protection plans and programs. + Previous knowledge to act for the Fire Chief during his absence. + Assumes complete charge of operations in absence of Fire Chief at crashes, fires, emergency situations, and at other times. + Directs activities and personnel, transmitting instructions to Assistant Chiefs on the scene or other personnel as to the procedures to be followed contingent on complexity of the incident type. + Must also have experience at management of self-inspection and compliance measurement programs Working Conditions: + + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Work is performed in a standard office with frequent travel to various locations to attend meetings and/or perform Department activities in responding to emergency scenes, disasters, or critical incidents; the employee occasionally works near moving mechanical parts; occasionally exposed to outside weather conditions and wet and/or humid conditions; occasionally works in high, precarious places; occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, extreme heat, risk of electrical shock, risk of radiation, and vibration; the noise level in the work environment is usually moderate; however, the noise level is occasionally very loud due to sirens, etc., wear protective apparel including goggles, face protector, aprons, safety shoes, and self-contained breathing apparatus; incumbents may be required to work extended hours including evenings and weekends. Physical Requirements: + + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Responsible for Fire Station daily operations to ensure personnel are well-trained and capable to perform their duties effectively and on short notice. Select and guide firefighters to perform as expected when called upon and will continually assess their readiness and performance. This assessment will maintain daily awareness of fire inspections, fire services, inspection and testing of fire protection and alarm systems, firefighter training, and fire drills. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. Manage installation FES to include maintaining operating instructions, Master Plan, Standards of Coverage, manpower, equipment and supplies. Develop and implement plans to cover for reduced operational capabilities; response, staffing, pollution prevention, safety of personnel, operational risk management Manage compliance self-inspection program IAW Army Installation Command checklist ensuring requirements contained in Amy Regulation 420-1, Performance Work Statement, DoDI 6055.6 are continually maintained. Manage and participate in the development and implementation of goals, objectives, policies, and priorities for assigned programs; recommend and administer policies and procedures; oversee and participate in the development of new fire ordinances. Provide 24/7 FES to the installation. Services include on-scene incident management, aircraft rescue and firefighting, structural firefighting, response to hazardous materials, technical rescue to include auto extrication and confined space rescue and emergency medical services support. Monitor and evaluate the efficiency and effectiveness of service delivery methods and procedures; recommend, within company policy, appropriate service and staffing levels. Plan, direct, coordinate, and review the work plan for fire service staff; assign work activities, projects, and programs; review and evaluate work products, methods, and procedures; meet with staff to identify and resolve problems. Select, train, motivate, and evaluate fire service personnel; provide or coordinate staff training; work with employees to correct deficiencies; implement discipline and termination procedures. Ensure that equipment, safety clothing, apparatus, and supplies are specified, purchased, received, distributed in an effective and consistent manner. Performs Job Duties as assigned.</p><p>Qualifications Minimum Qualifications : Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. An Associate s or higher degree in fire technology. Meet position certifications IAW DoD Manual 6055.06 except also hold Fire Officer IV certification; Shipboard firefighter is preferred. Must be a U.S. Citizen A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required. Host nation Heavy Duty Driver s License. Licenses/Certifications: International Fire Service Accreditation or Pro-Board Certifications - Fire Officer IV, Fire Instructor II, Fire Inspector II; HAZMAT Incident Commander, Airport Fire Fighter; Shipboard firefighter is preferred. Must meet training and certification requirements outlined in DoD Manual 6055.06. Clearance: Clearance level required at start date: Secret Experience: Ten years fire protection experience Three years at the Assistant Chief level. Supervisory/ Budget Responsibilities: Manages large department with multiple fire stations geographically dispersed and large number of personnel. Manages significant annual budget and also vehicle replacement programming and facility improvement planning. Skills: Must have experience directing firefighting operations to include fighting aircraft and structural fires, performing rescue services, and responding to hazardous materials incidents, medical emergencies, and confined space rescues. Knowledge of the chemistry of fire, preventive maintenance and operations of firefighting and rescue equipment, physical and chemical properties of combustible materials and building structures and their component systems. Experienced in managing fire prevention and protection plans and programs. Previous knowledge to act for the Fire Chief during his absence. Assumes complete charge of operations in absence of Fire Chief at crashes, fires, emergency situations, and at other times. Directs activities and personnel, transmitting instructions to Assistant Chiefs on the scene or other personnel as to the procedures to be followed contingent on complexity of the incident type. Must also have experience at management of self-inspection and compliance measurement programs Working Conditions: Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well. Work is performed in a standard office with frequent travel to various locations to attend meetings and/or perform Department activities in responding to emergency scenes, disasters, or critical incidents; the employee occasionally works near moving mechanical parts; occasionally exposed to outside weather conditions and wet and/or humid conditions; occasionally works in high, precarious places; occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, extreme heat, risk of electrical shock, risk of radiation, and vibration; the noise level in the work environment is usually moderate; however, the noise level is occasionally very loud due to sirens, etc., wear protective apparel including goggles, face protector, aprons, safety shoes, and self-contained breathing apparatus; incumbents may be required to work extended hours including evenings and weekends. Physical Requirements: Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</p><p><strong>Desired Candidate Profile</strong></p><p>An Associate s or higher degree in fire technology. Meet position certifications IAW DoD Manual 6055.06 except also hold Fire Officer IV certification; Shipboard firefighter is preferred. Must be a U.S. Citizen A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required. Host nation Heavy Duty Driver s License. Licenses/Certifications: International Fire Service Accreditation or Pro-Board Certifications - Fire Officer IV, Fire Instructor II, Fire Inspector II; HAZMAT Incident Commander, Airport Fire Fighter; Shipboard firefighter is preferred. Must meet training and certification requirements outlined in DoD Manual 6055.06. Clearance: Clearance level required at start date: Secret Experience: Ten years fire protection experience Three years at the Assistant Chief level.</p>

<p> <b>The UC-35 Cessna Citation Army Transport Aircraft Mechanic (FAA A&amp;P) </b>services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <br> <ul> <li>A valid <b>(FAA) A&amp;P</b> Airframe and Powerplant Certificate is Required.</li> <li> <b>Seven (7) years </b> experience as an (A&amp;P) mechanic with Seven (7) years of specific <b>UC-35 Cessna Citation</b> aircraft mechanic hands-on maintenance experience is Required.</li> <li> <b>US Citizenship is Required</b> to obtain a US Govt Secret Security Clearance, and for facility access.</li> <li>Operationally checks repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. </li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassembles and installs engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. </li> <li>Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as requested and assigned.</li> </ul> <p> <br> <br> </p> <p> <b>Minimum Requirements:</b> </p> <ul> <li>High school diploma or GED equivalent is Required.</li> <li>A valid <b>(FAA) A&amp;P</b> Certificate is Required.</li> <li>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific <b>UC-35 Cessna Citation</b> aircraft mechanic hands-on maintenance experience is Required.</li> <li>Completion of formal maintenance training on the assigned <b>Army UC-35/Cessna Citation Encore </b>aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance, on the UC-35 Citation aircraft during the past 12 months is Required.</li> <li>Six (6) months of flight line and overhaul &amp; inspection experience on the UC-35 Citation is preferred.</li> <li> <b>Mechanic Tools/Toolbox Required;</b> mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait).</li> <li>A valid <b>US Passport </b>- is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li> <li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li> </ul> <p> <br> <br> </p> <p> <b>(AR95-20) Mechanic Pre-employment Medical Requirements:</b> </p> <br> <ul> <li> <b>Medical/Physical.</b> All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.<br> <br> </li> </ul> <p> <b>Security Clearance Requirements:</b> </p> <br> <ul> <li>Must be able to obtain and maintain a US Govt <b>Secret</b> Security Clearance. Must be able to obtain and maintain facility credentials and authorization.<b> US Citizenship is Required</b> to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</li> </ul> <p><br></p><ul> </ul><p><strong>Desired Candidate Profile</strong></p><ul> <li>A valid <b>(FAA) A&amp;P</b> Airframe and Powerplant Certificate is Required.</li> <li> <b>Seven (7) years </b> experience as an (A&amp;P) mechanic with Seven (7) years of specific <b>UC-35 Cessna Citation</b> aircraft mechanic hands-on maintenance experience is Required.</li> <li> <b>US Citizenship is Required</b> to obtain a US Govt Secret Security Clearance, and for facility access.</li> <li>High school diploma or GED equivalent is Required.</li> <li>Completion of formal maintenance training on the assigned <b>Army UC-35/Cessna Citation Encore </b>aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance, on the UC-35 Citation aircraft during the past 12 months is Required.</li> <li>Six (6) months of flight line and overhaul &amp; inspection experience on the UC-35 Citation is preferred.</li> <li> <b>Mechanic Tools/Toolbox Required;</b> mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait).</li> <li>A valid <b>US Passport </b>- is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li> <li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li> <li>Must be able to obtain and maintain a US Govt <b>Secret</b> Security Clearance. Must be able to obtain and maintain facility credentials and authorization.<b> US Citizenship is Required</b> to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period. </li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft. </li> <li>May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li> <li>Must be able to travel to and between remote locations in austere and/or hostile environments.</li> <li>Proven track record demonstrating adaptability to change and the ability to respond to challenges in a changing environment.</li> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times. ESSENTIAL FUNCTIONS + Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. + Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. + Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. + Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. + Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. + Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. + Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. + Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. + Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. + Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. + Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. + Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. + Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). + Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. + Conduct off station maintenance when required. + When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Qualifications MINIMUM REQUIREMENTS / QUALIFICATIONS + Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language. + Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration. + Graduation from a standard four (4) year high school or equivalent (GED). + Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. + Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures). + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing -“I” Level &amp; “O” Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required. + Have a strong knowledge base of Intermediate Level Maintenance business procedures. + Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver’s license. + Must have an in-depth knowledge of technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must have a working knowledge (input and extract data) of computers. + Must be willing and able to work with job required hazardous materials. + Must be willing and able to conduct specialty on the job training. + Requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

Job Title: MI Systems Maintainer Integrator II<br><br>Job Category: Engineering and Technical Support<br><br>Time Type: Full time<br><br>Minimum Clearance Required to Start: TS/SCI<br><br>Employee Type: Regular-Long Term Assignment<br><br>Percentage of Travel Required: Up to 25%<br><br>Type of Travel: Local<br><br>* * *<br><br>The Opportunity<br><br>CACI has an immediate opening for a MI Systems Maintainer Integrator to support our mission critical program in Kuwait City, Kuwait.<br><br>As the selected candidate, you will, in part, perform installation, integration, configuration, employment, preventive maintenance, precision alignment, detailed and complicated diagnostics, troubleshooting, corrective maintenance, electronics monitoring and teardown of complex Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) and systems supporting SIGINT, FISINT, GEOINT, HUMINT, CI, TECHINT, OSINT, and All Source Intelligence for tasking, collection, processing, exploitation, production and dissemination at all echelons from tactical to national in multi-domain environments.<br><br>Responsibilities<br><br>Conduct installation, de-installation, reconfiguration, modification work orders and updates of computer hardware and software in local, regional, or global intelligence architectures including NIPRNet, SIPRNet, JWICS, TDN2, Special Access Programs (SAP) networks and coalition networks. Assist with configuration assessments, fielding, testing, modernization, reset, de-fielding, demilitarization and disposal of sensitive equipment. Inspect, test, diagnose, troubleshoot, repair and perform preventive maintenance on complex antenna and radio frequency distribution systems. Performs tests on electrical, electro-optical, and electro-mechanical equipment using multi-meters, oscilloscopes, signal generators, spectrum analyzers, bit error rate testers (BERT), and other complex and specialized test measurement and diagnostic equipment (TMDE), wire diagrams, logic and signal flow charts, technical manuals, troubleshooting charts, performance aids, schematic, and logic diagrams. Repair analog and fiber optics cables. Perform pre and post flight inspections on Guardrail Common Sensor (GRCS) mission equipment and data link. Submit standard and non-standard repair parts requests. Prepare equipment for transportation or shipment. Prepare maintenance, property accountability, and transportation forms and records. Coordinate and execute basic Able to maneuver in small spaces and lift up to 50lbs. Must meet deploy ability standards and be willing to commit for a minimum of 12 months<br><br>Qualifications<br><br>Required: <br><br>Bachelor's Degree in Electronics or related fields from an accredited college/university and two years of relevant experience or seven years of military training in MI Systems Maintenance and Integration. Experience on maintenance and integration on one or more of the following: GRCS; Enhanced Medium Altitude Reconnaissance Surveillance System (EMARSS) mission equipment; Tactical Command Data Link (TDCL); GRCS Operational Ground Station (OGS); Distributed Common Ground Station- Army (DCGS-A); software defined SIGINT collection platforms; biometrics collection, processing, exploitation, and dissemination equipment; CI/HUMINT support systems; TROJAN systems or satellite communication terminals providing TDN2; TENCAP systems; or intelligence non-standard equipment. Information assurance certifications for Tier I and II computer, servers, networks and global intelligence architectures integration and maintenance. US Citizen with active TS/SCI clearance is required. <br><br>Desired<br><br>This position or assignment may require a Polygraph, especially those requiring access to TDN2.<br><br>What You Can Expect<br><br> A culture of integrity.<br><br>At CACI, we place character and innovation at the center of everything we do. As a valued team member, you’ll be part of a high-performing group dedicated to our customer’s missions and driven by a higher purpose – to ensure the safety of our nation.<br><br>An environment of trust.<br><br>CACI values the unique contributions that every employee brings to our company and our customers - every day. You’ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality.<br><br>A focus on continuous growth.<br><br>Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground — in your career and in our legacy.<br><br>Pay Range<br><br>There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits.<br><br>The Proposed Salary Range For This Position Is<br><br>$68,400-$143,700<br><br>CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Job Details / Position Summary The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness. Description: • Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform.• Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data• Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.• Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals.• Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications.• Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins.• Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. • Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance.• Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system.• Performs close tolerance adjustment, repair and rework of equipment in and out of shop area.• Services, inspects and tests aviation support equipment used for direct and indirect aircraft support.• Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type.• Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE).• Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment.• Conducts off station maintenance when required.• When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: • High School Diploma • Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: + “I” Level &amp; “O” Level Tire &amp; Wheel certification + Hydraulic Contamination certification + Collateral Duty Inspector (CDI) qualification + Corrosion Prevention and Control and Aircraft Paint qualification + “I” Level Battery Maintenance certification Experience: • Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. • Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. • Must be United States (U.S.) citizen , be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Have a strong knowledge base of intermediate level maintenance business practices and procedures • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” level, “I” level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance. • Must have an in-depth knowledge of applicable technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program. • Must be willing and able to work with hazardous materials and conduct specialty on-the-job training. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>The UC-35 Cessna Citation Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p><p>Operationally checks repaired or modified systems for proper operation.</p><p>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</p><p>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.</p><p>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</p><p>Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.</p><p>Disassemble and inspect parts for wear, warping, or other defects.</p><p>Repair or replace defective engine parts and reassembles and installs engine in aircraft.</p><p>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</p><p>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</p><p>Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.</p><p>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</p><p>Ability to read, write, and interpret technical duties is required.</p><p>Ability to communicate effectively with all levels of employees throughout the organization.</p><p>May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.</p><p>Perform other qualified duties as requested and assigned.</p><p><strong>Desired Candidate Profile</strong></p><h4>Minimum Requirements:</h4><ul><li>High school diploma or GED equivalent is Required.</li><li>A valid (FAA) A&amp;P Certificate is Required.</li><li>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific UC-35 Cessna Citation aircraft mechanic hands-on maintenance experience is Required.</li><li>Completion of formal maintenance training on the assigned Army UC-35/Cessna Citation Encore aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li><li>Recent full-time experience in aviation maintenance, on the UC-35 Citation aircraft during the past 12 months is Required.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience on the UC-35 Citation is preferred.</li><li>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait).</li><li>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li><li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li><li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20)</li></ul><h4>Mechanic Pre-employment Medical Requirements:</h4><ul><li>Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</li></ul><h4>Security Clearance Requirements:</h4><ul><li>Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</li></ul><h4>Physical and Additional Qualifications:</h4><ul><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to distinguish color and judge three-dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li><li>May be exposed to extreme noise from turbine and jet engine aircraft.</li><li>May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li><li>Must be able to travel to and between remote locations in austere and/or hostile environments.</li><li>Proven track record demonstrating adaptability to change and the ability to respond to challenges in a changing environment.</li></ul>

<strong>Overview</strong> <br> <br> <p> <strong>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</strong> </p> <p> </p> <p>Position will administer and manage Subcontracts and Subcontract related activities at V2X within the CONUS/OCONUS region, which may involve both foreign and domestic subcontractors. This position will execute and administer various types of Subcontracts and Purchase Orders (POs) through close-out, ensuring compliance with corporate policies and procedures, legal guidelines, FAR/DFARS clauses, and customer requirements. Work on complex subcontract matters in both domestic and contingency locations and provides Program Management with contractual guidance while exercising sound ethical and professional judgment within a broadly defined best practice and written policy structure. Responsible for protecting the legal and financial interest of V2X during all discussions and interactions with customers and suppliers. Drafts Request for Proposals, develops source selection criteria, analyzes cost/price data to determine price reasonableness, leads negotiation efforts with subcontractors, and reviews and interprets clauses, formal amendments, agreements and legal documents. Supports all internal and external audits and provides program support to both internal and external customers. Operates under the functional guidance of Supply Chain organization and Corporate Purchasing Manual, while coordinating closely with other functional departments.</p> <br> <strong>Responsibilities</strong> <br> <br> <ul> <li>Qualifies suppliers, issues RFP s, evaluates proposals, documents cost and/or price analysis, executes subcontracts incorporating clauses, terms and conditions, technical specifications, statements of work and other certification and representations, and maintains compliant subcontract files in accordance with established procedures and FAR guidelines. Performs a full range of subcontract activities associated with the administration of subcontracts. Documents subcontractor performance using the Subcontract Past Performance Rating System SPPRS.</li> <li>Monitors subcontractor performance to ensure that all contract terms and conditions are met while adhering to cost/schedule and mission requirements.</li> <li>Uses judgment to interpret internal and external issues and develop best practices.</li> <li>Makes recommendations to management on subcontract issues, and execution of subcontract documents.</li> <li>Drives innovation in acquisition strategy for responsible programs/subcontracts.</li> <li>Owns the subcontract content for responsible programs.</li> <li>Assists in coordination with other functional areas, CONUS/OCONUS locations on matters related to subcontracting administration; compliance to V2X policies and procedures, and the Corporate Procurement Manual.</li> <li>Awards subcontract total value, authorizes funding, reviews and validates subcontractor invoices for payment monitor s balance.</li> <li>Uses specialized knowledge to solve complex and unique problems.</li> <li>Provides subcontract support to the Business Development/Capture Team.</li> <li>Verifies and ensures Subcontract documentation is compliant to the Corporate Procurement Manual, policies and procedures, and FAR/DFARS. Conducts reviews and preliminary audits of subcontract administration documentation.</li> <li>Performs other duties and special projects as assigned.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Qualifications</strong> <ul> <li>BS/BA Degree</li> </ul> </li> <li> <strong>Experience</strong> <ul> <li>Minimum of ten years specialized experience administering contracts/subcontracts, purchasing or contract administration using a variety of contract types in CONUS/OCONUS in support of US Federal Government prime contracts.</li> </ul> </li> <li>Shall have a thorough working knowledge of the Federal Acquisition Regulations (FAR), DoD FAR Supplement, and other departmental supplements as applicable.</li> <li> <strong>Skills</strong> <ul> <li>Possesses analytical and interpersonal skills in order to perform the job.</li> <li>Good problem solving, negotiation and organizational skills/techniques.</li> <li>Strong communicator</li> <li>Functionally skilled in Microsoft Office products including but not limited to Word, Excel, Outlook and SharePoint.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.

Welders <br><br> Job Id :100193695<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Required basic stick Welder<br><br>Ahli visa 18<br><br>Salary 220 + transport<br><br>Duty 8-6<br><br>contact details 99889253<br><br>Basic Details<br><br>Location : Al-Rai , Kuwait<br><br>Qualification<br><br>Posted : 1 month ago<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 99889253<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Daily stories, showrooms, products, offers &amp; activities</li><li>On site installation content collection</li><li>New content ideas</li><li>Reel support</li><li>Product highlight</li><li>Event exhibition coverage</li><li>Visiting branch for highlight new product post</li><li>Always learning &amp; improving</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Daily stories, showrooms, products, offers &amp; activities</li><li>On site installation content collection</li><li>New content ideas</li><li>Reel support</li><li>Product highlight</li><li>Event exhibition coverage</li><li>Visiting branch for highlight new product post</li><li>Always learning &amp; improving</li></ul><p><br></p></div>

Job Overview<br><br> JOB DESCRIPTION <br><br>The TCP Specialist – Wireline is responsible for planning, preparing, and executing Tubing Conveyed Perforating (TCP) operations safely and efficiently in support of customer well completion and intervention activities. This role provides advanced technical expertise in TCP systems, explosive handling, pressure control equipment, and perforating technologies while ensuring compliance with Weatherford operational procedures, HSE standards, and customer requirements.<br><br>Working closely with customers, drilling and completion teams, field operations, and engineering personnel, the TCP Specialist serves as the technical lead for TCP operations, ensuring equipment readiness, operational excellence, service quality, and successful project execution across onshore and offshore environments.<br><br>Responsibilities<br><br> Plan, coordinate, and execute Tubing Conveyed Perforating (TCP) operations in accordance with approved engineering programs, customer requirements, and Weatherford procedures. Prepare, inspect, assemble, test, and maintain TCP equipment, perforating guns, firing heads, setting tools, and associated downhole equipment. Ensure all explosive materials are handled, transported, stored, and utilized in compliance with company procedures and regulatory requirements. Conduct pre-job planning, risk assessments, Job Safety Analyses (JSAs), and operational briefings before each job. Verify equipment readiness, certification, maintenance status, and documentation prior to mobilization. Supervise rig-up, pressure testing, execution, troubleshooting, and rig-down of TCP equipment at customer well sites. Monitor operational performance and resolve technical issues during well completion and perforating operations. Coordinate activities with customer representatives, drilling contractors, rig personnel, and other service providers to ensure seamless execution. Prepare accurate operational reports, service tickets, equipment records, and post-job documentation. Investigate operational failures, perform root cause analysis, and implement corrective and preventive actions. Maintain inventory accuracy and ensure proper storage, preservation, and maintenance of TCP tools and explosive equipment. Mentor and provide technical guidance to junior Wireline Engineers, Field Specialists, and operators. Support new technology implementation, field trials, and continuous improvement initiatives. Ensure compliance with Weatherford HSE policies, customer standards, API requirements, and local regulatory requirements. Promote operational excellence, service quality, and customer satisfaction throughout all field activities. <br><br>Skills<br><br> Strong knowledge of Tubing Conveyed Perforating (TCP) systems and completion operations. Experience with perforating guns, firing heads, detonators, setting tools, and explosive systems. Knowledge of explosive safety regulations, transportation, storage, and handling procedures. Strong understanding of pressure control equipment (PCE) and well control principles. Experience with wireline and completion equipment used during TCP operations. Excellent troubleshooting and technical problem-solving skills. Strong mechanical aptitude and equipment maintenance capabilities. Knowledge of API standards, HSE requirements, and industry best practices. Effective communication and customer relationship management skills. Strong planning, organizational, and documentation skills. Ability to work independently under demanding operational conditions. Leadership and mentoring capabilities. Computer proficiency in operational reporting and Microsoft Office applications. Ability to travel and work rotational schedules in onshore and offshore environments. <br><br>Qualifications<br><br> High School Diploma, Technical Diploma, or Bachelor's degree in Mechanical Engineering, Petroleum Engineering, or a related technical discipline. Minimum 5–8 years of Wireline experience, including significant hands-on experience in Tubing Conveyed Perforating (TCP) operations. Proven experience supporting onshore and offshore well completion and perforating projects. Strong knowledge of pressure control equipment, perforating systems, and well intervention practices. Valid IWCF or IADC Well Control Certification is preferred. Valid explosives handling certification or equivalent regulatory authorization (where applicable). Offshore certifications such as BOSIET, H₂S, First Aid/CPR, and medical certification are preferred for offshore assignments. Experience working with Weatherford TCP systems and operational procedures is highly desirable. Strong commitment to safety, operational excellence, quality, and customer service. Willingness to travel internationally and work rotational field assignments as required.