وظائف مهندس ميكانيكا معدات ثقيلة

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Meaningful work and personal impact:As a Warehouseman/MHE Operator, you provide essential support to warehousing and distribution operations by safely operating forklifts and other MHE to load, unload, transport, and stage equipment. Your work ensures safe throughput of supplies, equipment accountability, and uninterrupted support to sustainment and logistics missions across the operational environment.How you will make an impact:Operate Material Handling Equipment (MHE) safely and in accordance with certification requirements and regulations.Assist Stock Clerks with selecting, issuing, receiving, and turning in equipment.Receive incoming cargo and verify documentation including manifests and turn-in forms.Perform unloading and loading of equipment from incoming shipments.Transport and stock equipment according to warehouse layout and assigned locations.Conduct daily PMCS of forklifts and government furnished equipment (GFE).Provide customer service support to units and personnel.Operate MHE and government-owned vehicles to move equipment and materials.Perform equipment staging, organization, and accountability operations.Support documentation, labeling, and preparation of cargo for movement.Ensure compliance with OSHA, DoD, Army, and Host Nation safety requirements.Participate in safe handling and storage of HAZMAT as required.Perform other duties as assigned. Work Environment: Work is performed both indoors and outdoors, requiring lifting up to 70 lbs, stooping, climbing, prolonged standing, and prolonged sitting. Workers may be exposed to cuts, scrapes, bruises, and other hazards associated with material handling. Protective Clothing and Equipment (PCE) is required in accordance with OSHA standards.Physical Activities:Work requires physical endurance, including lifting, bending, climbing, extended standing/sitting, and safely operating MHE in dynamic warehouse or yard environments.Minimum Qualifications:High school diploma and 6 yrs experience. One-year related experience may substitute for one year of military experience. Must possess knowledge of forklift operation and safety procedures. Must be proficient in speaking and reading English.Minimum six months of military or civilian experience as a forklift or MHE operator. Experience in warehouse, port, or logistics environments preferred.Ability to safely operate 4K 10K forklifts, diesel and automatic transmission equipment.Knowledge of equipment maintenance, load handling, and safety compliance.Understanding of warehouse operations, cargo flow, and material storage procedures.Ability to follow instructions, maintain accountability, and support inventory accuracy.Team communication, coordination, and situational awareness.Strong attention to detail.Valid US and Host Nation driver s license.Active U.S. SECRET clearance.Valid U.S. passport (minimum 2 years validity, 4 blank pages).Ability to pass CRC requirements and work a 48-hour workweek.Willingness to deploy to Iraq, Kuwait, Jordan, Saudi Arabia, Bahrain, Qatar, UAE, or other assigned areas. Certifications:Forklift/MHE operator license or ability to obtain.HAZMAT/HAZCOM certification as required.All required OSHA, AT, OPSEC, and safety training. GDIT IS YOUR PLACEAt GDIT, the mission is our purpose, and our people are at the center of everything we do. Growth: AI-powered career tool that identifies career steps and learning opportunities Support: An internal mobility team focused on helping you achieve your career goals Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time of Community: Award-winning culture of innovation and a military-friendly workplaceOWN YOUR OPPORTUNITYExplore a career in supply chain and logistics at GDIT and you ll find endless opportunities to grow alongside colleagues who thrive on efficiency, accuracy, and accountability.</div></section>

Technician <br><br> Job Id :100194105<br><br>Jobs<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Hello Everyone,<br><br>Kitchen Equipment Technicians are required for a maintenance company in Kuwait<br><br>Candidates should have experience in repairing and maintaining commercial kitchen equipment<br><br>Company will provide car +t accommodation + visa must be 18 and transferable<br><br>we also can hire people from India who are willing to work here.<br><br>Please send your CV and work experience by Whats App message only<br><br>No phone calls, please.<br><br>Basic Details<br><br>Location : Farwaniya , Kuwait<br><br>Qualification<br><br>Posted : 23 days ago<br><br>Job Type : Full-Time<br><br>Jobs<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 51521121<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

Document Controller <br><br> Job Id :100194435<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Dear All,<br><br>We currently have the following vacancies available.<br><br>Interested candidates are requested to share their updated CV and mention the position title in the subject to teamwork.jobs2018@gmail.com<br><br>Available Positions<br><br> Equipment Inspector – HSE Background<br><br>Equipment Inspector with an HSE background to inspect construction and industrial equipment and ensure compliance with project HSE requirements, applicable standards, and certification requirements.<br><br> HSE Document Controller<br><br>HSE Document Controller to support our Health, Safety & Environment (HSE) team on a major construction/data center project.<br><br> HSE Supervisor – Power Plant Experience<br><br>HSE Supervisor with strong power plant experience to oversee health, safety, and environmental activities at the project site. The candidate will be responsible for ensuring compliance with HSE procedures, project requirements, and applicable safety standards.<br><br>Thank you, and please feel free to share this opportunity with suitable candidates.<br><br>Basic Details<br><br>Location : Kuwait City , Kuwait<br><br>Download Interactive Maps<br><br>Qualification<br><br>Posted : 17 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : teamwork.jobs2018@gmail.com

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Primary Objective<br><br>To coordinate implementation of the KOC PMC Safety policies, HSE Management System and Project specific HSE. Management Plans as they apply to the project. Ensure that the site complies with the relevant HSE Legislation and KOC HSE requirements. Develop and implement the project HSE MS. Develop and maintain Statistical data for the Project. Prepare reports as required for the Worley Parsons KOC PMC HSEQ Manager. Position Reports to: HSE / QA / QC Manager.<br><br>Specific Accountabilities<br><br>Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment. Ensure the EPC contractors develop implement and maintain a specific project Risk Management Plan. Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations. Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements. Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action. Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/ additions to requirements as they come into effect. Review EPC contractor Safety Management System and advise of required changes. Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractor to foster the professional image of Worley Parsons. Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken. Other key activities shall include but not be limited to the following:Pro-actively visit site and with the EPC contractor implement safety measures- promote/ensure safe work practices. Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings. Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained. Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmers. Maintain a HS&E audit and assessment program for the location. Carry out regular inspections of the work areas with the respective EPC contractor line manager and or HSE representative and prepare reports. Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc. Assist EPC contractor line management and or construction supervisors in accident investigation process and report accordingly. Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives. Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors Monitor the availability and use of safety apparel and equipment. Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training,Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls Ensure all lines of communication on HSE-matters remain open and effective between all parties particularly KOC, Worley Parsons, EPC contractors and their subcontractors.<br><br>Qualification<br><br>Bachelor's degree in engineering (Mechanical, Chemical, Petroleum, Fire & Safety, Environment, Production, Industrial, Electrical, Instrumentation or Civil.) Minimum years total post-graduation experience. Minimum years Oil & Gas post-graduation experience. Minimum years' experience in a Safety /HSE Engineer. Practical experience with HSE management systems, reporting and audit procedures. Ability to develop, update and maintain in – house procedures. Must be conversant with local & international safety standards and norms. Practical experience of design, construction, commissioning and maintenance aspects of oil & gas installations.<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for an HSE Engineer for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <ul> <li>Coordinate implementation of the KOC PMC safety policies, HSE management system, and project-specific HSE management plans as they apply to the project.</li> <li>Ensure that the site complies with the relevant HSE legislation and KOC HSE requirements.</li> <li>Develop and implement the project HSE management system.</li> <li>Develop and maintain statistical data for the project.</li> <li>Prepare reports as required for the HSEQ manager.</li> </ul> <h4>Responsibilities</h4> <ul> <li>Monitor the EPC contractor HSE management system and provide advice and assistance to EPC HSE managers to ensure consistent compliance and reduce risk to project employees and the environment.</li> <li>Ensure the EPC contractors develop, implement, and maintain a specific project risk management plan.</li> <li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented timely in accordance with KOC expectations.</li> <li>Provide advice and guidance to the EPC contractor management team on HSE issues through interpretation of KOC policies and statutory requirements.</li> <li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety and training programs to provide a basis for further health and safety activities and highlight trends for future action.</li> <li>Monitor compliance with all Kuwait legislative requirements including dissemination of information to PMC and EPC managers and employees regarding amendments or additions to requirements as they come into effect.</li> <li>Review EPC contractor safety management system and advise on required changes.</li> <li>Develop and maintain professional relationships with KOC, regulatory bodies, and EPC contractors to foster the professional image of KBR.</li> <li>Visit the project site regularly to ensure interest and awareness of HSE is maintained; conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken.</li> <li>Proactively visit site and, with the EPC contractor, implement safety measures to promote and ensure safe work practices.</li> <li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow-up on findings.</li> <li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing work to maintain a safe working environment.</li> <li>Assist EPC subcontractor safety advisors and site management in the development and revision of specific site safety programmes.</li> <li>Maintain an HS&E audit and assessment program for the location.</li> <li>Carry out regular inspections of work areas with the respective EPC contractor line manager and HSE representative and prepare reports.</li> <li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters, etc.</li> <li>Assist EPC contractor line management and construction supervisors in accident investigation processes and report accordingly.</li> <li>Develop and implement safety initiatives to continually improve, achieve, and maintain stated safety performance and objectives.</li> <li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors.</li> <li>Monitor the availability and use of safety apparel and equipment.</li> <li>Provide advice to EPC subcontractor supervision on the development of project-specific procedures and Job Safety Analysis (JSA) training.</li> <li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls.</li> <li>Ensure all lines of communication on HSE matters remain open and effective between all parties, particularly KOC, KBR, EPC contractors, and their subcontractors.</li> </ul> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor’s degree in engineering.</li> <li>Minimum 8 years total post-graduation experience.</li> <li>Minimum 5 years oil and gas post-graduation experience.</li> <li>Minimum 5 years’ experience in an HSE engineer role.</li> <li>Practical experience with HSE management systems, reporting, and audit procedures.</li> <li>Ability to develop, update, and maintain in-house procedures.</li> <li>Must be conversant with local and international safety standards and norms.</li> <li>Practical experience of design, construction, commissioning, and maintenance aspects of oil and gas installations.</li> <li>Decarbonization, energy transition, and sustainability knowledge.</li> </ul> <p><strong>Belong. Connect. Grow.</strong></p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Role Purpose</b></p><p><br></p><p>The Business Applications Engineer will build, deploy, and support KDF's business applications on the Microsoft Power Platform and Microsoft 365. The role covers the full application lifecycle — requirements, design, development, testing, deployment, support, and controlled enhancement — turning operational and field requirements into practical, secure, and maintainable digital solutions.</p><p><br></p><p>The position works directly with business departments across Operations, HSE, Supply Chain, Finance, and HR to understand their processes and deliver working applications, automations, and reports. KDF operates Microsoft Dynamics 365, and the role provides day-to-day technical support to that environment alongside Power Platform delivery. The postholder builds within the platform standards, environment structure, and governance policies set by the Technology &amp; Digitalization Transformation function, and is accountable for the quality, documentation, and ongoing supportability of the solutions they deliver.</p><p><br></p><p><b>Key Roles and Responsibilities</b></p><p><br></p><ul><li>Work with business departments to gather, analyze, and document requirements, process flows, and acceptance criteria.</li><li>Design and build applications using Microsoft Power Apps, covering both canvas and model-driven approaches.</li><li>Build mobile-capable applications supporting field operations, including inspections, asset registration, checklists, and equipment tracking, with offline-tolerant use cases where required.</li><li>Design and maintain Dataverse solutions, including tables, relationships, business rules, security roles, and solution-aware development.</li><li>Develop and maintain automated business processes using Power Automate, including approvals, exception handling, and monitoring of live flows.</li><li>Build and support SharePoint Online solutions, including lists and libraries, content types, metadata, permissions, and integrated forms.</li><li>Develop Power BI reports and dashboards to support business reporting requirements.</li><li>Provide day-to-day technical support for the Microsoft Dynamics 365 environment, including configuration of forms, views, fields, business process flows, and role-based access against approved requirements.</li><li>Deliver integrations between Power Platform solutions and internal or third-party business systems using REST APIs and JSON.</li><li>Perform testing and support business users through user acceptance testing prior to release.</li><li>Deploy solutions across Development, Test/UAT, and Production environments using managed solutions and the established release procedure.</li><li>Provide ongoing support for applications after go-live, including incident resolution, defect fixes, access changes, performance issues, enhancements, and releases.</li><li>Maintain the enhancement backlog and agree priorities with business stakeholders.</li><li>Work within the organization's Data Loss Prevention policies, environment separation, role-based access control, and secure credential-handling standards, with no secrets embedded in solutions.</li><li>Follow change-control discipline for every release, including peer review, approval, testing evidence, rollback plans, and updated documentation.</li><li>Ensure applications and flows are owned by the business and the function rather than by an individual employee account.</li><li>Produce and maintain technical documentation, including data models, process flows, deployment steps, support runbooks, and user guides.</li><li>Deliver user training and handover material to business users and support staff.</li><li>Identify recurring inefficiencies in business processes and propose practical automation opportunities.</li><li>Escalate architecture decisions, security policy exceptions, and platform-level changes to the Digital Solutions Manager for approval.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Desired Skills and Qualifications</b></p><p><br></p><ul><li>Bachelor's degree in Computer Science, Information Technology, Software Engineering, Computer Engineering, or Information Systems.</li><li>2–5 years of hands-on experience building business applications on the Microsoft Power Platform or a comparable enterprise low-code platform.</li><li>Demonstrable delivery of production applications taken from requirements through to live use and ongoing support.</li><li>Hands-on experience with Microsoft Power Apps, including canvas applications and exposure to model-driven applications.</li><li>Practical experience with Microsoft Dataverse, including tables, relationships, business rules, and security roles.</li><li>Working experience with Power Automate, including approvals, exception handling, and troubleshooting live flows.</li><li>Experience with SharePoint Online, including lists and libraries, permissions, and integrated forms.</li><li>Power BI report development, including data preparation and basic DAX.</li><li>Experience delivering at least one integration using REST APIs, JSON, or a third-party business system.</li><li>Working knowledge of SQL and relational data modelling.</li><li>Experience supporting applications after go-live, including incidents, defects, access changes, and enhancements.</li><li>Experience working directly with business users to gather requirements and demonstrate solutions.</li><li>Ability to produce clear technical documentation and end-user guidance.</li><li>Strong analytical, problem-solving, communication, and stakeholder-engagement skills, with the ability to translate business requirements into practical solutions.</li><li>Exposure to Microsoft Dynamics 365 configuration is advantageous. Candidates without prior Dynamics 365 experience will be supported in developing it, as the role grows into this area.</li><li>Exposure to Microsoft Graph, Azure Functions, Logic Apps, or custom connectors is advantageous.</li><li>Exposure to application lifecycle management, managed solution deployment, Copilot Studio, or AI Builder is advantageous.</li><li>Awareness of DLP policies, security reviews, and change-management controls is advantageous.</li><li>Experience within the oil and gas, industrial, manufacturing, or field-operations sectors is preferred.</li></ul><p><br></p><p><b>Preferred Certifications</b></p><p><br></p><ul><li>PL-900: Microsoft Certified: Power Platform Fundamentals</li><li>PL-200: Microsoft Certified: Power Platform Functional Consultant Associate</li><li>PL-400: Microsoft Certified: Power Platform Developer Associate</li><li>PL-300: Microsoft Certified: Power BI Data Analyst Associate</li></ul><p><br></p></div>

Project Engineer<br><br> Job Id :100195421<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Project Engineer Required with Civil Engineering Background.<br><br>2-3 years experience is acceptable.<br><br>Knowledge in Dewatering and Shoring will be an added advantage.<br><br>Interested Candidates, please share your CV to mthomas@aptkuwait.com.<br><br>Basic Details<br><br>Location : Mangaf , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : mthomas@aptkuwait.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The ESM Systems Engineer III is required to be certified at the expert level in multiple disciplines of systems and security (e.g., Azure Solutions Architect, Windows Server Hybrid Administrator, &amp; CISSP) and provides high-level engineering and management support for all Enterprise systems. ESMs support Enterprise-class infrastructure in the RCC-SWA by providing optimization, administration, and technical documentation of all infrastructure systems. ESMs resolve and complete assigned cases and change requests and act as an escalation point for support issues. The core infrastructure technology duties include Microsoft Active Directory, Microsoft Entra ID (formerly Azure Active Directory), Microsoft Configuration Manager (formerly System Center Configuration Manager (SCCM) / Microsoft Endpoint Configuration Manager (MECM)), Windows Server Update Services (WSUS), Structured Query Language (SQL), Active Directory Federation Services (ADFS), Microsoft Identity Manager / Forefront Identity Manager (MIM/FIM), Domain Name System (DNS), Online Certificate Status Protocol (OCSP), and Public Key Infrastructure (PKI) system security and Group Policy, PowerShell scripting, and top-level support for enterprise-wide initiatives in a virtualized environment. The position is a senior role and will mentor Systems Engineers and serve as the primary support entity for problem escalation, reporting directly to the section team lead. Broad knowledge and expert hands-on experience in a large Enterprise are essential for success in this role. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Provides Enterprise-level support for Active Directory, Microsoft Entra ID (formerly Azure Active Directory), and Windows File Services in an Enterprise environment for global initiatives. + Performs problem Management and Root Cause Analysis for Corporate Identity Management in a large-scale Department of Defense setting. + Serves as an escalation point for application support and troubleshooting, provides guidance and direction in the resolution of escalated issues and complex production, application, or system problems. + Installs, configures, and maintains Microsoft Active Directory, Microsoft Enterprise tools, and third-party software. + Coordinates and implements patch management, monthly Windows update deployments process to Servers and Workstations, Analyze SCCM / Intune log files, application packaging, and distribution, operating system deployment (OSD), custom reporting using SQL and creating WQL queries. Create desktop and server images utilizing technologies such as MDT. + Create and maintain system documentation for domain technologies, including installation, configuration, and appropriate troubleshooting steps. + Improve existing processes through solutions to recurring problems and enhancements to existing solutions or documentation. + Troubleshoot servers and infrastructure equipment, assess networking requirements and implement solutions, and make accurate, independent decisions under pressure. + Coordinate work and communicate status, issues, and documentation clearly across teams and stakeholders. + Manage and prioritize multiple complex tasks simultaneously in a fast-paced, deadline-driven environment. + Performs other duties and assignments as required. Qualifications + Qualifications: + Security Clearance: + Requires an active Secret Clearance + Education / Certifications: One-year related experience can be substituted for one year of education if the degree is required. + Bachelor’s Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. + This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. + The authorized certifications for this job title are listed as follows: + Baseline: + Cisco: CCNP: Certified Network Professional - Security + CompTIA: CASP+ ce: Advanced Security Practitioner + CompTIA: SecurityX ce + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler + ISACA: CISA: Certified Information Systems Auditor + ISC2: CCSP: Certified Cloud Security Professional + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + Computing Environment (CE): + Microsoft: 365 Certified: Enterprise Administrator Expert + Microsoft: Certified: Azure Database Administrator Associate + Microsoft: Certified: Azure Security Engineer Associate + Microsoft: Certified: Azure Solutions Architect Expert + Microsoft: MCSA: Cloud Platform + Microsoft: MCSA: Windows Server 2012 + Microsoft: MCSA: Windows Server 2016 + Microsoft: MCSE: Cloud Platform and Infrastructure + Microsoft: MCSE: Core Infrastructure + Microsoft: MCSE: Data Management and Analytics + Microsoft: MCSE: Productivity Solutions Expert + Microsoft: MCSE: Server Infrastructure 2012 + Microsoft: MCTS: Administering and Deploying System Center 2012 Configuration Manager (SCCM) + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + Minimum of 5 years of experience (10 preferred) in demonstrating the ability and aptitudes required to perform technical, managerial, or analytical work and coordination involving management of Enterprise level information systems. + Platforms including a combination of the following: + Microsoft Active Directory + Microsoft Entra ID (formerly Azure Active Directory) + Microsoft Configuration Manager (MCM), formerly System Center Configuration Manager (SCCM) / Microsoft Endpoint Configuration Manager (MECM), Intune, Windows Server Update Services (WSUS) + Structured Query Language (SQL) + Microsoft Identity Manager / Forefront Identity Manager (MIM/FIM) + Active Directory Federation Services (ADFS) + Domain Name System (DNS) + Public Key Infrastructure (PKI) + Azure Virtual Desktop in a Wide Area Network. + Experience with a customer service-oriented company. + Skills &amp; Technology Used: + Proficiency in using a computer - desktop or laptop. + Proficiency in using Microsoft productivity software. + Proficiency in using Email client software. + Ability to troubleshoot servers and infrastructure equipment, assess networking requirements and provide solutions, and make accurate and independent decisions under pressure. + Excellent organizational, interpersonal, written, and verbal communication skills. + Ability to perform comfortably in a fast-paced, deadline-oriented work environment and to successfully execute many complex tasks simultaneously. + Ability to Install, configure, and maintain Microsoft Active Directory, Microsoft Enterprise tools, and third-party software utilities for hardware systems within operational guidelines. + Active Directory, Microsoft Entra ID (formerly Azure Active Directory) and Windows Enterprise environment. + Microsoft Configuration Manager (formerly System Center Configuration Manager (SCCM) / Microsoft Endpoint Configuration Manager (MECM)). + Ability to analyze SCCM / Intune log files, application packaging, and distribution, operating system deployment (OSD). + MS Active Directory Domain Services. + MS Active Directory Certificate Services (AD CS). + Ability to create and maintain system documentation for domain technologies, including installation, configuration, and appropriate troubleshooting steps. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Design and Estimate the value of project being tendered as part of the team. Work experience as Design Engineer in MNC Companies like SAIPEM, PETROFAC, TECHNIP, L&amp;T, MCDERMOTT, WOOD, WORLEY, FLUOR etc., would be preferred.</p><p>Role: Tender Manager</p><p><strong>Desired Candidate Profile</strong></p><p>Work experience as Design Engineer in MNC Companies like SAIPEM, PETROFAC, TECHNIP, L&amp;T, MCDERMOTT, WOOD, WORLEY, FLUOR etc., would be preferred.</p>

<p><h4>Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead HSE Engineer to support HSE function on PMC Project with Kuwait Oil Company in Kuwait.</p> <h4>Summary section</h4> <p>The Lead HSE engineer will coordinate implementation of the KOC PMC Safety policies, HSE Management System and project specific HSE Management Plans as they apply to the project.<br> He will ensure that the site complies with the relevant HSE legislation and KOC HSE requirements.<br> He will develop and implement the project HSE MS.<br> He will develop and maintain statistical data for the project and prepare reports as required for the KBR KOC PMC HSEQ Manager.</p> <h4>Mandatory qualifications including required education, experience, & skills:</h4> <ul> <li>Bachelor degree in engineering</li> <li>Minimum 12 years total post-graduation experience</li> <li>Minimum 8 years oil & gas post-graduation experience</li> <li>Minimum 5 years’ experience in a Lead HSE Engineer role</li> <li>Practical experience of design, construction, commissioning and maintenance aspects of oil/gas installations</li> <li>Practical experience with HSE management systems, reporting and audit procedures</li> <li>Excellent written coordination and verbal communication skills</li> <li>Ability to develop, update and maintain in-house procedures</li> <li>Must be conversant with local and international safety standards and norms</li> <li>Must possess two or more HSE certifications (certified courses) in General Industrial Safety, Construction Safety, Environmental Management, Industrial Hygiene, ISO 14001 / OHSAS 18001 Lead Auditor, NEBOSH, ICertOSH, ASSE Certificate in Global Safety Management or equivalent courses</li> </ul> <h4>Responsibilities:</h4> <ul> <li>Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment</li> <li>Ensure the EPC contractors develop, implement and maintain a specific project Risk Management Plan</li> <li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations</li> <li>Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements</li> <li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action</li> <li>Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/additions to requirements as they come into effect</li> <li>Review EPC contractor Safety Management System and advise of required changes</li> <li>Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractors to foster the professional image of KBR</li> <li>Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken</li> </ul> <p>Other key activities shall include but not be limited to the following:</p> <ul> <li>Pro-actively visit site and with the EPC contractor implement safety measures - promote/ensure safe work practices</li> <li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings</li> <li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained</li> <li>Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmes</li> <li>Maintain a HS&E audit and assessment program for the location</li> <li>Carry out regular inspections of the work areas with the respective EPC contractor line manager and/or HSE representative and prepare reports</li> <li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc.</li> <li>Assist EPC contractor line management and/or construction supervisors in accident investigation process and report accordingly</li> <li>Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives</li> <li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors</li> <li>Monitor the availability and use of safety apparel and equipment</li> <li>Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training</li> <li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls</li> <li>Ensure all lines of communication on HSE matters remain open and effective between all parties particularly KOC, KBR, EPC contractors and their sub-contractors</li> </ul> <p>Decarbonization – Energy transition – Sustainability<br> Belong. Connect. Grow. with KBR!</p></p><p></p>

<p>The Data Center Electrical Engineer is responsible for the engineering-level ownership, reliability, safety, and performance of the data center electrical power infrastructure, from the utility intake through to the rack level. The role manages electrical maintenance strategy, switching procedures, electrical safety programs, vendor activities, spare parts planning, and system performance. The Electrical Engineer also directs the electrical manning technicians, authorizes and leads critical switching operations, and acts as the electrical authority during incidents and escalations.</p><p>Key Responsibilities</p><ul><li>Take engineering ownership of the data center electrical infrastructure, including MV/LV distribution systems, HV/MV switchgear, GIS/AIS, transformers, RMUs, UPS systems, STS/ATS systems, generators, fuel systems, batteries, and protection systems.</li><li>Develop, maintain, and control electrical switching procedures.</li><li>Authorize, lead, and supervise HV/MV and critical LV switching operations.</li><li>Manage the arc flash and electrical safety program for the data center.</li><li>Ensure full compliance with Lockout/Tagout, LOTO, Permit to Work, PTW, and electrical isolation requirements.</li><li>Develop and manage the annual electrical Planned Preventive Maintenance, PPM, program in line with OEM recommendations.</li><li>Coordinate generator load-bank testing and generator readiness programs in accordance with NFPA 110.</li><li>Prepare, review, and maintain electrical Standard Operating Procedures, SOPs, Methods of Procedure, MOPs, and Emergency Operating Procedures, EOPs.</li><li>Review and approve the safe execution of electrical procedures and maintenance activities.</li><li>Coordinate electrical maintenance vendors and supervise OEM major services, testing, repairs, and equipment overhauls.</li><li>Develop and maintain the spare-parts and critical-inventory plan for electrical systems.</li><li>Analyze electrical system performance, protection settings, load profiles, power usage, and equipment capacity.</li><li>Identify and implement opportunities for energy optimization and improved electrical system performance.</li><li>Lead root cause analysis for electrical faults, failures, alarms, and service interruptions.</li><li>Develop and follow up corrective and preventive actions arising from electrical incidents.</li><li>Direct, support, develop, and train the electrical manning technicians.</li><li>Support integrated systems testing, testing and commissioning, and electrical system readiness activities.</li><li>Support predictive maintenance programs, including thermography, transformer oil sampling, and condition monitoring.</li><li>Act as the electrical technical authority during incidents, emergencies, and operational escalations.</li><li>Provide 24/7 on-call support and shift coverage assistance when required.</li></ul><p>Minimum Qualifications</p><ul><li>Bachelor s degree in Electrical Engineering.</li><li>Minimum of five years of experience in electrical operations and maintenance involving MV/LV electrical systems.</li><li>At least two years of experience in a data center, critical facility, industrial facility, or similarly high-availability environment.</li><li>Practical experience with HV/MV switching and critical LV switching operations.</li><li>Working knowledge of electrical protection systems, switching procedures, isolation practices, and electrical safety requirements.</li><li>Working knowledge of generator control systems such as DeepSea, ComAp, or Woodward.</li><li>Familiarity with NFPA 110 and applicable NEC references.</li><li>Demonstrated experience in electrical maintenance planning, technical procedure writing, and vendor management.</li><li>Strong technical reporting and documentation skills.</li><li>Fluency in written and spoken English.</li></ul><p>Preferred Qualifications and Certifications</p><ul><li>HV/MV switching authorization or license issued or recognized by the relevant GCC regulatory authority.</li><li>OEM training or certification related to UPS and critical-power systems from Schneider Electric, Eaton, Vertiv, ABB, or an equivalent manufacturer.</li><li>OEM training or certification related to MV/LV switchgear and protection systems from Schneider Electric, ABB, Siemens, Eaton, or an equivalent manufacturer.</li><li>OEM training or certification related to generators from Caterpillar, Cummins, MTU, Rolls-Royce, Kohler, SDMO, or an equivalent manufacturer.</li><li>OEM training or certification related to STS, ATS, and power-distribution systems from Vertiv, ABB, Eaton, Socomec, or an equivalent manufacturer.</li></ul><p>Other Requirements</p><ul><li>Willingness to work in a critical data center environment.</li><li>Availability for 24/7 on-call support.</li><li>Ability to support shift coverage, planned maintenance, emergency response, and critical switching activities.</li><li>Ability to coordinate with operations, facilities, safety, vendors, and OEM service teams.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Electrical Engineering.</li><li>Minimum of five years of experience in electrical operations and maintenance involving MV/LV electrical systems.</li><li>At least two years of experience in a data center, critical facility, industrial facility, or similarly high-availability environment.</li><li>Practical experience with HV/MV switching and critical LV switching operations.</li><li>Working knowledge of electrical protection systems, switching procedures, isolation practices, and electrical safety requirements.</li><li>Working knowledge of generator control systems such as DeepSea, ComAp, or Woodward.</li><li>Familiarity with NFPA 110 and applicable NEC references.</li><li>Demonstrated experience in electrical maintenance planning, technical procedure writing, and vendor management.</li><li>Strong technical reporting and documentation skills.</li><li>Fluency in written and spoken English.</li><li>HV/MV switching authorization or license issued or recognized by the relevant GCC regulatory authority.</li><li>OEM training or certification related to UPS and critical-power systems from Schneider Electric, Eaton, Vertiv, ABB, or an equivalent manufacturer.</li><li>OEM training or certification related to MV/MV switchgear and protection systems from Schneider Electric, ABB, Siemens, Eaton, or an equivalent manufacturer.</li><li>OEM training or certification related to generators from Caterpillar, Cummins, MTU, Rolls-Royce, Kohler, SDMO, or an equivalent manufacturer.</li><li>OEM training or certification related to STS, ATS, and power-distribution systems from Vertiv, ABB, Eaton, Socomec, or an equivalent manufacturer.</li><li>Willingness to work in a critical data center environment.</li><li>Availability for 24/7 on-call support.</li><li>Ability to support shift coverage, planned maintenance, emergency response, and critical switching activities.</li><li>Ability to coordinate with operations, facilities, safety, vendors, and OEM service teams.</li></ul>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>Data Center Network Engineers support the Enterprise-class infrastructure of the RCC-SWA. RCC-SWA engineers provide optimization, administration, and technical documentation of all enterprise infrastructure systems. Additionally, engineers resolve and appropriately complete assigned cases and change requests while acting as an escalation point for troubleshooting issues. The core infrastructure technology duties include an in-depth understanding of Cisco s Nexus switching, ASR routing, UCS compute platforms, and lifecycle management planning. The MCF is managed by the RCC-SWA and provides enterprise Information Technology (IT) services to approved Army customers. Program: OMDAC-SWACA</p><p>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program!</p><p>You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p>Responsibilities</p><ul><li>Produce enterprise-level support for a dynamic and large-scale networking infrastructure from the perspective of service origination in the data center, as well as service delivery in the global transport architecture.</li><li>Provide expert level knowledge of data center infrastructure hardware such as Nexus 9000 series switches, Fabric Extenders, UCS chassis and UCS Fabric Interconnects.</li><li>Along with assuming the expert role regarding vPC, FCoE, Catalyst VSS, MPLS L3VPN, eBGP/iBGP, OSPF/EIGRP, DMVPN, FlexPod design philosophy, among other tunneling and data center-centric technologies.</li><li>While also offering a basic understanding of VMware s vSphere infrastructure and the virtual networking components for troubleshooting purposes.</li><li>Installation, configuration, maintenance, and troubleshooting of the data center environment are primary roles in this position.</li><li>Provides change control and engages Cisco TAC for issues, modifications and best practices when needed.</li><li>Monitors availability and reliability of the data center network and supported infrastructure utilizing DX NetOps Spectrum, SolarWinds Orion and Cisco DNA Center.</li><li>Executes engineering best practices in network builds, integration, testing, and documentation while adhering to security fundamentals provided by DISA s Security Technical Implementation Guides (STIGs).</li><li>Perform regular system maintenance in support of IAVA vulnerabilities and CCRI compliance.</li><li>Ensure that all managed technologies are compliant with current DISA Security Technical Implementation Guides (STIGs).</li><li>Assist with identifying and investigating malicious network activity.</li><li>Create and track network issues/requests using the ServiceNow ticketing system.</li><li>Create, update and maintain detailed network diagrams.</li><li>Performs other duties and assignments as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Requires an active Secret Clearance</li><li>One-year related experience can be substituted for one year of education if the degree is required.</li><li>Bachelor s Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field.</li><li>This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification.</li><li>Python and/or Ansible scripting</li><li>Cisco DevNet</li><li>Working knowledge of Linux</li><li>At least 10 years of practical experience working with network and systems technologies.</li><li>A full understanding of cloud computing and the different pillars that support cloud computing (IaaS, PaaS, SaaS).</li><li>Experience working with Cisco Nexus and cloud technologies.</li><li>Expert level of understanding and experience with data network systems, routing, switching, Virtual Routing and Forwarding (VRF), MPLS, and layer 2 protocols.</li><li>Experience with VPN technologies.</li><li>A solid background with TCP/IP and must be able to troubleshoot all supported network protocols.</li><li>Experience with creating and maintaining custom python scripts.</li><li>Experience working with and maintaining Cisco DNA Center.</li><li>Ability to verify that all systems under the direct control of RCC-SWA are properly configured in accordance with the NETCOM, RCC-SWA and DISA STIG configuration policies.</li><li>Ability to manage asset documentation for accreditation and authorization.</li><li>Ability to assess networking requirements and provide solutions.</li><li>Ability to make accurate and independent decisions under pressure.</li><li>Ability to successfully execute many complex tasks simultaneously.</li><li>Expert ability to troubleshoot infrastructure equipment.</li><li>Excellent organizational, interpersonal, written, and verbal communication skills</li><li>Ability to perform comfortably in a fast-paced, deadline-oriented work environment.</li><li>Ability to successfully execute many complex tasks simultaneously across departmental boundaries.</li><li>Experience with a customer service-oriented company</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The PKI Certificate Authority Engineer is required to be certified at the expert level in multiple disciplines of systems and security (e.g. MCSE &amp; CISSP). The engineer provides expert level engineering support for all Public Key Infrastructure services. A PKI Certificate Authority Engineer supports Enterprise-class infrastructure in the RCC-SWA by providing optimization, administration, and technical documentation of all Public Key Infrastructure systems. The engineer shall perform discovery, analysis, monitoring, and management of all digital certificates deployed by the Certificate Authority (CA). The position will collaborate with system owners and serve as the primary support entity for problem escalation, reporting directly to the section team lead. Broad knowledge and expert level hands-on experience in a large Enterprise are essential for success in this role. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Operate and maintain Certificate Authority Servers but not limited to databases and Hardware Security Module on NIPR, SIPR and Coalition enclaves. + Manage the CA life cycle, including generation, revocation, expiry, and updating to determine where each certificate is installed. + Troubleshoot Active Directory Certificate Services, HSMs, Certificate Enrollment Web Services, Certificate Enrollment Policy Web Service, and Internet Information Services (IIS). + Aid with defining and developing the strategic plan for Public Key Infrastructure (PKI) and assist with the implementation of PKI and other certificate related technologies. + Create and maintain system documentation for certificate-based technologies, including installation, configuration, and appropriate troubleshooting steps. + Improve existing processes through solutions to recurring problems and enhancements to existing solutions or documentation. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Requires an active Secret Clearance + Education / Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Bachelor’s Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. + This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. + The authorized certifications for this job title are listed as follows: + BASELINE: + Cisco: CCNP Security + CompTIA: CASP+ ce: Advanced Security Practitioner + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler + ISACA: CISA: Certified Information Systems Auditor + ISC2: CCSP Certified Cloud Security Professional + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + COMPUTING ENVIRONMENT (CE): + Microsoft: 365 Certified: Enterprise Administrator Expert + Microsoft: Certified: Azure Database Administrator Associate + Microsoft: Certified: Azure Security Engineer Associate + Microsoft: Certified: Azure Solutions Architect Expert + Microsoft: MCSA: Cloud Platform + Microsoft: MCSA: Windows Server 2012 + Microsoft: MCSA: Windows Server 2016 + Microsoft: MCSE: Cloud Platform and Infrastructure + Microsoft: MCSE: Core Infrastructure + Microsoft: MCSE: Data Management and Analytics + Microsoft: MCSE: Productivity Solutions Expert + Microsoft: MCSE: Server Infrastructure 2012 + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + At least five (5) years of practical experience working with: + MS Active Directory Domain Services + MS Active Directory Certificate Services (AD CS) + Public Key Infrastructure (PKI) + Cryptography Standards + Managing keystores (JKS, JCEKS, PKCS #12) + Windows MSCS) and trust stores + Hardware security modules (HSM's) + Key management services (KMS) + Online Certificate Status Protocol (OCSP) + Two-factor authentication: + RSA, Smartcards (CAC). + Understanding of FIPS 140-2 compliance and Standard Technical Implementation Guides (STIGs). + Experience with a customer service-oriented company. + Skills &amp; Technology Used: + Ability to troubleshoot servers and infrastructure equipment, assess networking requirements and provide solutions, and make accurate and independent decisions under pressure. + Excellent organizational, interpersonal, written, and verbal communication skills. + Ability to perform comfortably in a fast-paced, deadline-oriented work environment and to successfully execute many complex tasks simultaneously. + MS Active Directory Domain Services. + MS Active Directory Certificate Services (AD CS). + Public Key Infrastructure (PKI). + Cryptography Standards. + JKS, JCEKS, PKCS #12, Windows MSCS. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Erection Engineer</p><p>&nbsp;</p><p>Bachelor Degree in Electrical Engineering according to Kuwait Bachelor Standard. Atleast 4 Years</p><p>7 Years of Minimum Experience</p><p>&nbsp;</p><p>Key Responsibilities</p><p>Shall have experience in installation of Indoor Gas Insulated Switchgear Substation Projects with exposure of 132KV to 400KV voltage level.&nbsp; Responsible to supervise all the activities at Substation as per Client’s requirement, in concern to complying project task with quality and under required safety measures.&nbsp;&nbsp;</p><p>&nbsp;</p><p>To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HVAC works and to resolve arising site issues.&nbsp;&nbsp;</p><p>&nbsp;</p><p>Shall have good communication skills and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works.</p><p>&nbsp;</p><p>Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, material requisition etc.</p>

<p>Maintenance &amp; Testing Engineer Salary - 400 to 600Kwd (Rs.1,23,000 to 1,85,000) 5 - 7 years of Experience in Low Voltage Switchgear, Transformer, Medium Voltage Switchgear upto 11kv Must have Knowledge of Switchgear, Transformer, Ups &amp; Battery System Required Candidate profile Good knowledge to work as a team leader Good English Speaking Able to lead a team and handle site activities independently Engineering Degree Mandatory Salary Negotiable Location - Kuwait. Perks and benefits Accommodation, Transportation, Medical Insurance</p><p><strong>Desired Candidate Profile</strong></p><p>Good knowledge to work as a team leader Good English Speaking Able to lead a team and handle site activities independently Engineering Degree Mandatory</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Assistant Resident Engineer to join our team for an exciting port project in Kuwait. In this role, you will be responsible for supporting the Resident Engineer in overseeing project management, construction management, and supervision services for a major port project. Assist in managing day-to-day project activities, ensuring adherence to schedules, budgets, and quality standards Conduct regular site inspections and monitor construction progress Collaborate with all project stakeholders to resolve technical issues and ensure project compliance Support the Resident Engineer in coordinating with local authorities and regulatory bodies Participate in project meetings and contribute to decision-making processes Ensure compliance with safety regulations and environmental standards Assist in quality control and quality assurance activities throughout the project lifecycle Monitor and report on project risks, recommending mitigation strategies as needed</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Civil Engineering or related field Minimum of 12 years of experience in civil engineering, preferably in port projects or marine construction Strong knowledge of project management principles and construction management techniques Excellent skills in Microsoft Office Suite, including Project and Excel Strong analytical and problem-solving skills Excellent organizational and time management abilities Effective communication and interpersonal skills Ability to work in a multicultural environment Willingness to relocate to Kuwait for the duration of the project</p><p></p></section>

<p>Immediate Vacancy @ KUWAIT</p><p>Position: Planning Engineer</p><p>Location: Kuwait</p><p>Qualification: B.E. / B.Tech Electrical / Civil/ Mechanical</p><p>Experience: Minimum 5 Years</p><p>Salary: Negotiable</p><p>Job Description : PMP or Planning Certification 5+ yrs of experience in Project Planning &amp; Scheduling. Primavera P6, MS Project, MS Excel (Advanced)</p><p>Duty Hours: 9 Hours/Day</p><p>Company Provides: Accommodation Transportation</p><p>Long-Term Job Opportunity</p><p>FREE RECRUITMENT</p><p><strong>Desired Candidate Profile</strong></p><ul><li>B.E. / B.Tech Electrical / Civil/ Mechanical</li><li>Minimum 5 Years Experience</li><li>PMP or Planning Certification</li><li>5+ yrs of experience in Project Planning &amp; Scheduling.</li><li>Primavera P6, MS Project, MS Excel (Advanced)</li></ul>

<br> <br> <strong>Responsibilities</strong> <br> <br> <ul> <li>Provides Enterprise-level support for Active Directory, Microsoft Entra ID (formerly Azure Active Directory), and Windows File Services in an Enterprise environment for global initiatives.</li> <li>Performs problem Management and Root Cause Analysis for Corporate Identity Management in a large-scale Department of Defense setting.</li> <li>Serves as an escalation point for application support and troubleshooting, provides guidance and direction in the resolution of escalated issues and complex production, application, or system problems.</li> <li>Installs, configures, and maintains Microsoft Active Directory, Microsoft Enterprise tools, and third-party software.</li> <li>Coordinates and implements patch management, monthly Windows update deployments process to Servers and Workstations, Analyze SCCM / Intune log files, application packaging, and distribution, operating system deployment (OSD), custom reporting using SQL and creating WQL queries. Create desktop and server images utilizing technologies such as MDT.</li> <li>Create and maintain system documentation for domain technologies, including installation, configuration, and appropriate troubleshooting steps.</li> <li>Improve existing processes through solutions to recurring problems and enhancements to existing solutions or documentation.</li> <li>Troubleshoot servers and infrastructure equipment, assess networking requirements and implement solutions, and make accurate, independent decisions under pressure.</li> <li>Coordinate work and communicate status, issues, and documentation clearly across teams and stakeholders.</li> <li>Manage and prioritize multiple complex tasks simultaneously in a fast-paced, deadline-driven environment.</li> <li>Performs other duties and assignments as required.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Qualifications:</strong> </li> <li> <strong>Security Clearance:</strong> <ul> <li>Requires an active Secret Clearance</li> </ul> </li> <li> <strong>Education / Certifications:</strong> <em>One-year related experience can be substituted for one year of education if the degree is required. </em> <ul> <li>Bachelor s Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field.</li> <li>This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification.</li> <li>The authorized certifications for this job title are listed as follows:</li> </ul> </li> <li> <strong>Baseline:</strong> <ul> <li>Cisco: CCNP: Certified Network Professional - Security</li> <li>CompTIA: CASP+ ce: Advanced Security Practitioner</li> <li>CompTIA: SecurityX ce</li> <li>GIAC: GCED: Certified Enterprise Defender</li> <li>GIAC: GCIH: Certified Incident Handler</li> <li>ISACA: CISA: Certified Information Systems Auditor</li> <li>ISC2: CCSP: Certified Cloud Security Professional</li> <li>ISC2: CISSP (<strong>or Associate</strong>): Certified Information Systems Security Professional</li> </ul> </li> <li> <strong>Computing Environment (CE):</strong> <ul> <li>Microsoft: 365 Certified: Enterprise Administrator Expert</li> <li>Microsoft: Certified: Azure Database Administrator Associate</li> <li>Microsoft: Certified: Azure Security Engineer Associate</li> <li>Microsoft: Certified: Azure Solutions Architect Expert</li> <li>Microsoft: MCSA: Cloud Platform</li> <li>Microsoft: MCSA: Windows Server 2012</li> <li>Microsoft: MCSA: Windows Server 2016</li> <li>Microsoft: MCSE: Cloud Platform and Infrastructure</li> <li>Microsoft: MCSE: Core Infrastructure</li> <li>Microsoft: MCSE: Data Management and Analytics</li> <li>Microsoft: MCSE: Productivity Solutions Expert</li> <li>Microsoft: MCSE: Server Infrastructure 2012</li> <li>Microsoft: MCTS: Administering and Deploying System Center 2012 Configuration Manager (<strong>SCCM</strong>)</li> </ul> </li> <li> <strong>Experience:</strong> <em>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience.</em> <ul> <li>Minimum of 5 years of experience (10 preferred) in demonstrating the ability and aptitudes required to perform technical, managerial, or analytical work and coordination involving management of Enterprise level information systems.</li> <li>Platforms including a combination of the following:<ul> <li>Microsoft Active Directory</li> <li>Microsoft Entra ID (formerly Azure Active Directory)</li> <li>Microsoft Configuration Manager (MCM), formerly System Center Configuration Manager (SCCM) / Microsoft Endpoint Configuration Manager (MECM), Intune, Windows Server Update Services (WSUS)</li> <li>Structured Query Language (SQL)</li> <li>Microsoft Identity Manager / Forefront Identity Manager (MIM/FIM)</li> <li>Active Directory Federation Services (ADFS)</li> <li>Domain Name System (DNS)</li> <li>Public Key Infrastructure (PKI)</li> <li>Azure Virtual Desktop in a Wide Area Network.</li> </ul> </li> <li>Experience with a customer service-oriented company.</li> </ul> </li> <li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Our client, a leading organization in the oil and gas sector, is seeking an experienced Civil Design Engineer to support critical TA26 projects at their PIC facility in Shuaiba, Kuwait. This temporary position plays a key role in delivering effective and efficient civil engineering design solutions that enhance plant output, performance and reliability within a demanding petrochemical environment.</p><br> <p><strong>Core Responsibilities</strong></p><br> <ul> <li>Provide robust civil engineering designs and solutions for TA26 projects, ensuring structural integrity, safety and durability of plant-related infrastructure.</li> <li>Optimize civil designs to support maximum plant output and performance while aligning with technical, safety and operational standards.</li> </ul><br><ul> <li>8-15 years of total experience in civil engineering, including a minimum of 8 years of hands on Design Engineering within the Oil &amp; Gas / Petrochemical industry. You will bring deep familiarity with industry standards, plant conditions and project execution in complex brownfield environments.</li> <li>Bachelor's Degree in Civil Engineering, approved by the Kuwait Society of Engineers, ensuring compliance with local professional and regulatory requirements.</li> </ul> </div>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>The ESM Systems Engineer III is required to be certified at the expert level in multiple disciplines of systems and security (e.g., Azure Solutions Architect, Windows Server Hybrid Administrator, &amp; CISSP) and provides high-level engineering and management support for all Enterprise systems. ESMs support Enterprise-class infrastructure in the RCC-SWA by providing optimization, administration, and technical documentation of all infrastructure systems. ESMs resolve and complete assigned cases and change requests and act as an escalation point for support issues.</p><p>The core infrastructure technology duties include Microsoft Active Directory, Microsoft Entra ID (formerly Azure Active Directory), Microsoft Configuration Manager (formerly System Center Configuration Manager (SCCM) / Microsoft Endpoint Configuration Manager (MECM)), Windows Server Update Services (WSUS), Structured Query Language (SQL), Active Directory Federation Services (ADFS), Microsoft Identity Manager / Forefront Identity Manager (MIM/FIM), Domain Name System (DNS), Online Certificate Status Protocol (OCSP), and Public Key Infrastructure (PKI) system security and Group Policy, PowerShell scripting, and top-level support for enterprise-wide initiatives in a virtualized environment.</p><p>The position is a senior role and will mentor Systems Engineers and serve as the primary support entity for problem escalation, reporting directly to the section team lead. Broad knowledge and expert hands-on experience in a large Enterprise are essential for success in this role.</p><p>Program: OMDAC-SWACA</p><p>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p>Responsibilities</p><ul><li>Provides Enterprise-level support for Active Directory, Microsoft Entra ID (formerly Azure Active Directory), and Windows File Services in an Enterprise environment for global initiatives.</li><li>Performs problem Management and Root Cause Analysis for Corporate Identity Management in a large-scale Department of Defense setting.</li><li>Serves as an escalation point for application support and troubleshooting, provides guidance and direction in the resolution of escalated issues and complex production, application, or system problems.</li><li>Installs, configures, and maintains Microsoft Active Directory, Microsoft Enterprise tools, and third-party software.</li><li>Coordinates and implements patch management, monthly Windows update deployments process to Servers and Workstations, Analyze SCCM / Intune log files, application packaging, and distribution, operating system deployment (OSD), custom reporting using SQL and creating WQL queries.</li><li>Create desktop and server images utilizing technologies such as MDT.</li><li>Create and maintain system documentation for domain technologies, including installation, configuration, and appropriate troubleshooting steps.</li><li>Improve existing processes through solutions to recurring problems and enhancements to existing solutions or documentation.</li><li>Troubleshoot servers and infrastructure equipment, assess networking requirements and implement solutions, and make accurate, independent decisions under pressure.</li><li>Coordinate work and communicate status, issues, and documentation clearly across teams and stakeholders.</li><li>Manage and prioritize multiple complex tasks simultaneously in a fast-paced, deadline-driven environment.</li><li>Performs other duties and assignments as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Requires an active Secret Clearance</p><p>One-year related experience can be substituted for one year of education if the degree is required. Bachelor s Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification.</p><p>The authorized certifications for this job title are listed as follows:</p><ul><li>Baseline: Cisco: CCNP: Certified Network Professional - Security</li><li>CompTIA: CASP+ ce: Advanced Security Practitioner</li><li>CompTIA: SecurityX ce</li><li>GIAC: GCED: Certified Enterprise Defender</li><li>GIAC: GCIH: Certified Incident Handler</li><li>ISACA: CISA: Certified Information Systems Auditor</li><li>ISC2: CCSP: Certified Cloud Security Professional</li><li>ISC2: CISSP ( or Associate ): Certified Information Systems Security Professional</li><li>Computing Environment (CE): Microsoft: 365 Certified: Enterprise Administrator Expert</li><li>Microsoft: Certified: Azure Database Administrator Associate</li><li>Microsoft: Certified: Azure Security Engineer Associate</li><li>Microsoft: Certified: Azure Solutions Architect Expert</li><li>Microsoft: MCSA: Cloud Platform</li><li>Microsoft: MCSA: Windows Server 2012</li><li>Microsoft: MCSA: Windows Server 2016</li><li>Microsoft: MCSE: Cloud Platform and Infrastructure</li><li>Microsoft: MCSE: Core Infrastructure</li><li>Microsoft: MCSE: Data Management and Analytics</li><li>Microsoft: MCSE: Productivity Solutions Expert</li><li>Microsoft: MCSE: Server Infrastructure 2012</li><li>Microsoft: MCTS: Administering and Deploying System Center 2012 Configuration Manager ( SCCM )</li></ul><p>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience.</p><p>Minimum of 5 years of experience (10 preferred) in demonstrating the ability and aptitudes required to perform technical, managerial, or analytical work and coordination involving management of Enterprise level information systems.</p><p>Platforms including a combination of the following: Microsoft Active Directory Microsoft Entra ID (formerly Azure Active Directory) Microsoft Configuration Manager (MCM), formerly System Center Configuration Manager (SCCM) / Microsoft Endpoint Configuration Manager (MECM), Intune, Windows Server Update Services (WSUS) Structured Query Language (SQL) Microsoft Identity Manager / Forefront Identity Manager (MIM/FIM) Active Directory Federation Services (ADFS) Domain Name System (DNS) Public Key Infrastructure (PKI) Azure Virtual Desktop in a Wide Area Network.</p><p>Experience with a customer service-oriented company.</p><p>Skills &amp; Technology Used:</p><ul><li>Proficiency in using a computer - desktop or laptop.</li><li>Proficiency in using Microsoft productivity software.</li><li>Proficiency in using Email client software.</li><li>Ability to troubleshoot servers and infrastructure equipment, assess networking requirements and provide solutions, and make accurate and independent decisions under pressure.</li><li>Excellent organizational, interpersonal, written, and verbal communication skills.</li><li>Ability to perform comfortably in a fast-paced, deadline-oriented work environment and to successfully execute many complex tasks simultaneously.</li><li>Ability to Install, configure, and maintain Microsoft Active Directory, Microsoft Enterprise tools, and third-party software utilities for hardware systems within operational guidelines.</li><li>Active Directory, Microsoft Entra ID (formerly Azure Active Directory) and Windows Enterprise environment.</li><li>Microsoft Configuration Manager (formerly System Center Configuration Manager (SCCM) / Microsoft Endpoint Configuration Manager (MECM)).</li><li>Ability to analyze SCCM / Intune log files, application packaging, and distribution, operating system deployment (OSD).</li><li>MS Active Directory Domain Services.</li><li>MS Active Directory Certificate Services (AD CS).</li><li>Ability to create and maintain system documentation for domain technologies, including installation, configuration, and appropriate troubleshooting steps.</li></ul>