وظائف مهندسين مدنى - محافظة العاصمة (الكويت) الكويت

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for an HSE Engineer for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <ul> <li>Coordinate implementation of the KOC PMC safety policies, HSE management system, and project-specific HSE management plans as they apply to the project.</li> <li>Ensure that the site complies with the relevant HSE legislation and KOC HSE requirements.</li> <li>Develop and implement the project HSE management system.</li> <li>Develop and maintain statistical data for the project.</li> <li>Prepare reports as required for the HSEQ manager.</li> </ul> <h4>Responsibilities</h4> <ul> <li>Monitor the EPC contractor HSE management system and provide advice and assistance to EPC HSE managers to ensure consistent compliance and reduce risk to project employees and the environment.</li> <li>Ensure the EPC contractors develop, implement, and maintain a specific project risk management plan.</li> <li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented timely in accordance with KOC expectations.</li> <li>Provide advice and guidance to the EPC contractor management team on HSE issues through interpretation of KOC policies and statutory requirements.</li> <li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety and training programs to provide a basis for further health and safety activities and highlight trends for future action.</li> <li>Monitor compliance with all Kuwait legislative requirements including dissemination of information to PMC and EPC managers and employees regarding amendments or additions to requirements as they come into effect.</li> <li>Review EPC contractor safety management system and advise on required changes.</li> <li>Develop and maintain professional relationships with KOC, regulatory bodies, and EPC contractors to foster the professional image of KBR.</li> <li>Visit the project site regularly to ensure interest and awareness of HSE is maintained; conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken.</li> <li>Proactively visit site and, with the EPC contractor, implement safety measures to promote and ensure safe work practices.</li> <li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow-up on findings.</li> <li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing work to maintain a safe working environment.</li> <li>Assist EPC subcontractor safety advisors and site management in the development and revision of specific site safety programmes.</li> <li>Maintain an HS&E audit and assessment program for the location.</li> <li>Carry out regular inspections of work areas with the respective EPC contractor line manager and HSE representative and prepare reports.</li> <li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters, etc.</li> <li>Assist EPC contractor line management and construction supervisors in accident investigation processes and report accordingly.</li> <li>Develop and implement safety initiatives to continually improve, achieve, and maintain stated safety performance and objectives.</li> <li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors.</li> <li>Monitor the availability and use of safety apparel and equipment.</li> <li>Provide advice to EPC subcontractor supervision on the development of project-specific procedures and Job Safety Analysis (JSA) training.</li> <li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls.</li> <li>Ensure all lines of communication on HSE matters remain open and effective between all parties, particularly KOC, KBR, EPC contractors, and their subcontractors.</li> </ul> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor’s degree in engineering.</li> <li>Minimum 8 years total post-graduation experience.</li> <li>Minimum 5 years oil and gas post-graduation experience.</li> <li>Minimum 5 years’ experience in an HSE engineer role.</li> <li>Practical experience with HSE management systems, reporting, and audit procedures.</li> <li>Ability to develop, update, and maintain in-house procedures.</li> <li>Must be conversant with local and international safety standards and norms.</li> <li>Practical experience of design, construction, commissioning, and maintenance aspects of oil and gas installations.</li> <li>Decarbonization, energy transition, and sustainability knowledge.</li> </ul> <p><strong>Belong. Connect. Grow.</strong></p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role &amp; responsibilities</b> 1. Design Review and Enhancement: Evaluate and enhance mechanical designs to ensure compliance with industry standards and project requirements. Provide technical expertise in HVAC equipment design and selection, offering optimization and efficiency improvement suggestions. 2. Systems Knowledge: Possess in-depth knowledge of HVAC systems, fire-fighting pump selection, and understanding of LPG, water, and drainage systems. Demonstrate proficiency in selecting and integrating HVAC equipment into project designs. 3. Statutory Compliance: Stay abreast of and ensure compliance with local regulations and statutory requirements related to HVAC, LPG, water, and drainage systems. Advise project teams on regulatory considerations and necessary adjustments to maintain compliance. 5. Maintenance Expertise: Exhibit knowledge and experience in maintaining HVAC equipment, providing valuable insights for optimal performance and longevity. 6. Consultant and Contractor Collaboration: Have a comprehensive background working in consultancy, contributing to developing and refining project designs. Collaborate effectively with contractors, offering technical support and guidance during project implementation. 7 . Site Evaluation: Oversee site evaluations, providing instructions to on-site engineers and addressing any issues. Ensure that project specifications are met during the evaluation/supervision phase.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>4. Experience: Bring a wealth of experience exceeding 5 years in mechanical engineering, focusing on HVAC systems and related disciplines.</p><p>Bachelors degree in mechanical engineering. work experience in consultancy and contracting firms.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible to supervise all the activities at Substation as per Clients requirement, in concern to complying project task with quality and under required safety measures. To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HAVC works and to resolve arising site issues. Shall have good communication skill and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works. Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, materials requisition etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / Btech in Electrical Enigneering with minimum 7 years of experience. Shall have experience in installation of indoor Gas insulated Switchgear substation Projects with exposure of 132KV to 400 KV voltage level.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p> <p> </p> <p> <strong>Your Development Journey</strong> </p> <p>You ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: </p> <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience </li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training </li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients </li> </ul> <p> </p> <p> <strong>Your day-to-day could include: </strong> </p> <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives </li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs </li> <li>Analyse performance data and recommend improvements </li> <li>Manage equipment logistics and ensure seamless setup and operation at the rig site </li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams </li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance </li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently </li> </ul> <p> </p> <p> <strong>What We re Looking For</strong> </p> <ul> <li>Graduated with bachelor s degree in engineering (all fields) within the last 24 months </li> <li>No more than 1 year of experience </li> <li>English language fluent proficiency (written and spoken) </li> <li>Strong communication and interpersonal skills </li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions </li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore) </li> </ul> <p> </p> <p> <strong>What to Expect</strong> </p> <p>This role is physically and mentally demanding. You ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you re up for the challenge, the rewards are big. </p> <p>You ll join one of our specialized product lines, such as: </p> <ul> <li>Completions </li> <li>Drilling Services </li> <li>Wireline Services </li> <li>Artificial Lift </li> <li>Well Services </li> <li>Managed Pressure Drilling and many more </li> </ul> <p> </p> <p><br></p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including electrical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform electrical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for electrical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in electrical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, ETAB or similar).</p></li><li><p>Strong understanding of codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 12 years of experience in Electrical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based/Transferable Visa</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The suitable candidate should have a minimum of 12-15 years of relevant mechanical experience within the Oil &amp; Gas industry together with a minimum of 2-5 years' experience in the design and construction of onshore plants. The ideal candidate shall be familiar with industry standard codes and construction practises. Will perform liaison duties between Client and Contractor reporting to the Resident Engineer.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required</p><p>Candidate available immediately within Kuwait preferred</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Process Engineer shall monitor and check all Contractor requisitions, work packages, risk and method statements etc. to ensure optimized work processes. Witness and verify compliance with the design specification including oversight of construction and Commissioning to ensure QHSE standards are maintained. In addition he shall provide on the job training to his client counterpart. The suitable candidate should have minimum of 12 years of relevant process experience within the Oil &amp; Gas industry together with a minimum of 10 years' experience in the design and construction of onshore plants. The ideal candidate shall be familiar with industry standard codes and construction practices. Will perform liaison duties between client and Contractor.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required</p><p>Candidate available immediately within Kuwait preferred</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p><p>Experience in Operation, process and day to day activities in Raw Mill, Coal &amp; Kiln corrective measures to improve plant performance.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Ensure the health, safety, and environmental (HSE) compliance of maritime &amp; cargo operations. Oversee everything from heavy crane operations &amp; hazardous material handling. Inspect marine vessels, port jetties heavy lifting gear to ensure SWL limits<br> <br> <p> <b>Required Candidate profile</b> </p>Functional safety, hazard identification (HAZID)&amp; knowledge of port yard &amp; stevedoring operations. B.E (Mechanical, Marine, or Industrial) combined with specialized HSE or fire safety qualifications</div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Develop and maintain production schedules based on production requirements &amp; plant capacity to meet customer demands.</p></li><li><p>Identify delays and accordingly adjust schedule to meet deadlines and assist in production risk assessment and mitigation activities.</p></li><li><p>Ability to deal simultaneously with various work orders/products.</p></li><li><p>Collaborate with cross-functional teams, including production, engineering, purchasing, and quality control to ensure timely and efficient production which aligns with production plan.</p></li><li><p>Ensuring resource availability in coordination with associated departments.</p></li><li><p>Assist in employee hiring, training, and performance evaluation.</p></li><li><p>Assist in the development of scheduling tools to increase the level of automation and reduce the manual nature of the scheduling function.</p></li><li><p>Create and maintain production reports, including daily/weekly production reports, inventory reports, scheduling reports, KPI and charts.<br></p></li></ul><p>Skills Required:</p><p>Strong planning, analytical skill &amp; organizational skill, Inventory management, AutoCAD, Assembly procedures, ISO procedures, Lean manufacturing principles, Excellent communication skills, Detail oriented, Microsoft office (Proficient level), Safety procedures, Time study standard, Team attitude, eager to cooperate with others and Problem solving &amp; result oriented.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE Mechanical / Electrical/ Production Engineering <br>Minimum 3 Years of experience</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced and results-driven <strong> HVAC Sales Engineer</strong> to join our growing team in <strong>Kuwait</strong>. The ideal candidate will have a strong background in HVAC project sales and business development, with proven experience selling Air Conditioning systems including <strong>Split AC, Ducted AC, Window AC, VRF/VRV systems</strong>, and related MEP solutions within the <strong>Kuwait/GCC market</strong>.</p><p>This role requires a proactive sales professional who can identify project opportunities, build strong relationships with contractors, consultants, developers, and end-users, and drive sustainable revenue growth.</p><p>Key Responsibilities</p><ul><li><p>Drive sales of Split AC, Window AC, Ducted AC Systems, VRF/VRV Systems, and associated MEP products for projects.</p></li><li><p>Generate new business through market visits, client meetings, networking, and business development activities.</p></li><li><p>Identify potential accounts and develop relationships with MEP contractors, consultants, developers, and project clients.</p></li><li><p>Promote and sell HVAC products along with related MEP solutions based on customer and project requirements.</p></li><li><p>Manage project sales opportunities and actively follow up on leads to achieve monthly and annual sales targets.</p></li><li><p>Build and maintain strong customer relationships to support long-term business growth.</p></li><li><p>Monitor market trends, competitor activities, and emerging project opportunities.</p></li><li><p>Coordinate with engineering, estimation, and project teams to ensure successful project execution and customer satisfaction.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum <strong>2-3 years of Kuwait/GCC experience</strong> in HVAC/AC project sales.</p></li><li><p>Strong experience in selling <strong>Split AC, Window AC, Ducted AC, and VRF/VRV Systems</strong>.</p></li><li><p>Previous experience working with reputed HVAC/AC brands is highly preferred.</p></li><li><p>Engineering background preferred.</p></li><li><p>Proven track record in business development, project sales, and customer relationship management.</p></li><li><p>Strong network with MEP contractors, consultants, developers, and project owners in Kuwait is an advantage.</p></li><li><p>Excellent communication, negotiation, and presentation skills.</p></li><li><p>Ability to work independently and drive sales growth.</p></li><li><p>Valid Kuwait Driving License is preferred.</p></li></ul><p>Preferred Qualifications</p><ul><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related engineering field.</p></li><li><p>Experience in project sales of HVAC/AC equipment within the <strong>Kuwait market</strong>.</p></li><li><p>Familiarity with <strong>Kuwait Municipality regulations</strong>, local MEP standards, and HVAC installation practices.</p></li><li><p>Knowledge of project cost estimation, BOQ analysis, tendering, and contract documentation.</p></li><li><p>Experience using CRM software and preparing technical and commercial proposals.</p></li></ul><p></p></section>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Primary objective</h4> <p>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets corporate, location and contractual requirements.</p> <p>Manage project service and product verification and inspection of the project consistent with criticality assessments and contractual and regulatory obligations.</p> <p>Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits and project quality reporting and review.</p> <p>Accountable for QA/QC related matters at project sites.</p> <p>Must have experience in inspections of all stages of projects in oil & gas installations and construction QA/QC works.</p> <p>Excellent written, coordination and verbal communication skills.</p> <p>Ability to develop, update and maintain in-house technical standards and specifications.</p> <p>Familiarity with ISO 9000 series and international standards relevant to the oil and gas industry.</p> <h4>What you will bring:</h4> <strong>HSE Management</strong><br> <p>Demonstrate behavior and practices consistent with managerial, co-worker and community duty of care obligations.</p> <p>Work with the Project HSE Advisor and the Project Management Team to ensure that all areas of the project’s operations conform to applicable WorleyParsons, regulatory and contractual HSE obligations.</p> <strong>Quality Management</strong><br> <p>Work with the Location Quality Manager and the Project Management Team to ensure:</p> <ul> <li>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS) consistent with specific location, regulatory and contractual requirements.</li> <li>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures and reference materials via the Project Web Site, EMS, WPMP and the Knowledge Communities as applicable.</li> <li>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory and contractual obligations.</li> <li>Effective planning and implementation of design control, verification, validation and review activities.</li> <li>Effective implementation and coordination of vendor assessment and inspection activities.</li> <li>Effective implementation and verification of construction inspection and testing activities.</li> <li>Effective implementation of non-conformance, corrective action, and preventive action management processes.</li> <li>Establishment of an effective risk-based audit program.</li> <li>Effectiveness of Project Management Review Programs including collection, analysis and reporting of project performance measures.</li> </ul> <strong>Capability Enhancement</strong><br> <ul> <li>Participate in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments.</li> <li>Support in-house education, promotion and awareness programs relating to sound quality management practice and WorleyParsons quality strategies.</li> <li>Facilitate the implementation of existing and new company processes and capability enhancements across the Project Operations.</li> <li>Determine areas of potential improvement and, in consultation with the Location Quality Manager and Project Management Team, facilitate the implementation of improvements to address these areas and evaluate the outcomes of the improvements. If this position has identified such areas, he or she should take ownership.</li> <li>Facilitate independent review and certification of Project Quality Management Systems in line with corporate, legislative or customer requirements.</li> </ul> <strong>Customer Relationships</strong><br> <p>Ensure that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are being identified and managed by the Project Team effectively.</p> <strong>Resources</strong><br> <ul> <li>In conjunction with the Project Management Team and the Location Quality Manager, recruit and allocate quality practitioners to project verification and inspection roles to ensure these activities are suitably resourced.</li> <li>Ensure that new quality practitioners are effectively inducted in all aspects that relate to the quality aspects of the project.</li> </ul> <strong>Performance Management</strong><br> <ul> <li>In conjunction with the Project Management Team and the Location Quality Manager, provide functional leadership for project quality personnel.</li> <li>Strengthen and coach project quality personnel to support development, management and administration of project quality management systems in response to project and customer expectations.</li> </ul> <h4>Qualifications / Experience:</h4> <ul> <li>Full-time Bachelor’s Degree in Engineering (any discipline) from an accredited university.</li> <li>Minimum 8 years of total experience post graduate studies.</li> <li>Minimum 5 years of experience in the oil & gas, refinery, or petrochemical industry.</li> <li>Minimum 5 years of experience as a QA/QC Engineer or equivalent.</li> <li>Must have experience in inspections of all stages of projects in oil & gas installations and construction QA/QC works.</li> <li>Must have experience in developing, updating and maintaining in-house technical standards and specifications.</li> <li>Fully conversant with NDE requirements and sour environments.</li> <li>Familiarity with ISO 9000 and 14000 series and international standards relevant to the oil and gas industry.</li> <li>Excellent written, coordination and verbal communication skills.</li> </ul> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Primary objective</h4> <p>Development and management of construction and completions capability across PMC projects ensuring that design integrity is not compromised while managing the department in the execution of the process. Managing and executing the projects according to the field contract.</p> <h4>What you will do:</h4> <ul> <li>Promote and drive the involvement of construction in areas of technical design, schedule, preliminary execution planning, and cost estimating.</li> <li>Develop and maintain a familiarity and appreciation of capability and ongoing workload of construction’s support providers/contractors.</li> <li>Develop and maintain functional responsibility for all construction and completions personnel.</li> <li>Technical competence of construction personnel.</li> <li>Forecast requirement for construction engineering resources and allocate those resources.</li> <li>Prepare man hour estimates to perform project tasks.</li> <li>Promote cost reduction and productivity enhancing initiatives.</li> <li>Prepare weekly progress and expenditure reports on a project specific basis.</li> </ul> <h4>What you will bring:</h4> <ul> <li>Familiar with management of heavy lifting equipment and large earth moving activities.</li> <li>Demonstrated experience of working in the oil & gas industry. Must have proven track record in leading a team.</li> <li>Pre-commissioning and commissioning and performance testing experience.</li> <li>Experienced in the specification, evaluation and documentation of equipment.</li> <li>Work is performed in accordance with broad technical guidelines and with minimal supervision.</li> <li>Ability to work to tight deadlines and prioritization of work to achieve them.</li> </ul> <h4>Qualifications / experience</h4> <ul> <li>Full-time bachelor’s degree in engineering from an accredited university.</li> <li>Minimum 10 years of total experience post graduate studies.</li> <li>Minimum 5 years of experience in the oil & gas, refinery, or petrochemical industry.</li> <li>Minimum 5 years of recent experience as a lead construction engineer or equivalent.</li> </ul> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The WAN Engineer is required to be certified at the expert level in multiple disciplines of networks and security (e.g. CCNP/CCIE &amp; CISSP). WAN Engineers performs operation and maintenance (O&amp;M) for the RCC-SWA enterprise network infrastructure. WAN Engineers will ensure stability and provide daily support of a geographically dispersed Wide Area Network Infrastructure and are responsible for design, troubleshooting, optimization, administration, change management and technical documentation. Must have expert knowledge of Cisco routers, switches, VPN devices, and routing protocols. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Security Clearance: Requires an active Secret Clearance</li><li>Education / Certifications: One-year related experience can be substituted for one year of education if the degree is required. Associates Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. The authorized certifications for this job title are listed as follows: BASELINE: Cisco: CCNP: Certified Network Professional - Security ( Cannot be used as a dual qualifier ) CompTIA: CASP+ ce: Advanced Security Practitioner CompTIA: SecurityX ce GIAC: GCED: Certified Enterprise Defender GIAC: GCIH: Certified Incident Handler ISACA: CISA: Certified Information Systems Auditor ISC2: CCSP: Certified Cloud Security Professional ISC2: CISSP ( or Associate ): Certified Information Systems Security Professional COMPUTING ENVIRONMENT (CE): Cisco: CC-DN-A: Certified DevNet Associate Cisco: CCIE: Certified Internetwork Expert ( Any ) Cisco: CCNP: Certified Network Professional ( Any ) ( Cannot be used as a dual qualifier )</li><li>Experience : One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. At least 10 years of practical experience working with network and systems technologies. A high level of understanding and experience with data network systems, routing, switching, Virtual Routing and Forwarding (VRF), MPLS, and layer 2 protocols. Experience with VPN technologies. A solid background with TCP/IP and must be able to troubleshoot all supported network protocols. Experience with creating and maintaining custom python scripts. Experience working with and maintaining Cisco DNA Center Experience with a customer service-oriented company.</li><li>Skills &amp; Technology Used: Ability to verify that all systems under the direct control of RCC-SWA are properly configured in accordance with the Higher Headquarters, Local, and DISA STIG configuration policies. Ability to manage asset documentation for accreditation and authorization. Ability to assess networking requirements and provide solutions. Ability to make accurate and independent decisions under pressure. Ability to successfully execute many complex tasks simultaneously. Expert ability to troubleshoot infrastructure equipment. Excellent organizational, interpersonal, written, and verbal communication skills Ability to perform comfortably in a fast-paced, deadline-oriented work environment. Ability to successfully execute many complex tasks simultaneously across departmental boundaries.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Develop technical specifications, scopes of work, and procurement documents for IAQ and environmental systems. Review engineering drawings, technical datasheets, product catalogs, test reports, and manufacturer documentation. Evaluate supplier technical proposals and verify compliance with project specifications and applicable standards. Prepare technical bid evaluation reports and provide recommendations for supplier selection. Ensure procured equipment complies with applicable environmental, health, and safety regulations. Manage procurement activities from technical evaluation through delivery, installation, and warranty support. Maintain technical documentation, procurement records, equipment specifications, and asset information.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in environmental engineering, Environmental Science, Chemical Engineering, Industrial Engineering, or a related field. Minimum experience in technical procurement, engineering, HVAC, indoor air quality, environmental systems, or related technical fields. Experience with public-sector procurement, EPC projects, or facility management is an advantage.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Assistant Resident Engineer to join our team for an exciting port project in Kuwait. In this role, you will be responsible for supporting the Resident Engineer in overseeing project management, construction management, and supervision services for a major port project. Assist in managing day-to-day project activities, ensuring adherence to schedules, budgets, and quality standards Conduct regular site inspections and monitor construction progress Collaborate with all project stakeholders to resolve technical issues and ensure project compliance Support the Resident Engineer in coordinating with local authorities and regulatory bodies Participate in project meetings and contribute to decision-making processes Ensure compliance with safety regulations and environmental standards Assist in quality control and quality assurance activities throughout the project lifecycle Monitor and report on project risks, recommending mitigation strategies as needed</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Civil Engineering or related field Minimum of 12 years of experience in civil engineering, preferably in port projects or marine construction Strong knowledge of project management principles and construction management techniques Excellent skills in Microsoft Office Suite, including Project and Excel Strong analytical and problem-solving skills Excellent organizational and time management abilities Effective communication and interpersonal skills Ability to work in a multicultural environment Willingness to relocate to Kuwait for the duration of the project</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Production Optimization Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Optimization Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a dynamic and result-oriented Fire protection Engineer to drive business growth for our Fire Protection and Fire &amp; Gas (F&amp;G) Engineering Consultancy services. The successful candidate will be responsible for identifying new business opportunities, developing client relationships, preparing technical and commercial proposals, and converting opportunities into awarded projects across the Oil &amp; Gas, Petrochemical, Industrial, Power, Infrastructure, and Commercial sectors.</p><p>Identify and develop new business opportunities for Fire Protection and Fire &amp; Gas Engineering Consultancy services.</p><p>Develop and maintain a database of End Clients, EPC Contractors, PMC Consultants, and Industrial Customers.</p><p>Generate qualified leads through market research, networking, industry events, and client engagement.</p><p>Build strong relationships with key decision-makers within client organizations.</p><p>Conduct client meetings to understand project requirements and identify engineering consultancy opportunities.</p><p>Deliver technical and business presentations showcasing the company's capabilities and value proposition.</p><p>Coordinate with the engineering team to develop technical solutions and commercial proposals.</p><p>Prepare, submit, and negotiate technical and commercial proposals.</p><p>Follow up on submitted proposals and actively drive opportunities through to Purchase Order (PO) award.</p><p>Maintain an opportunity pipeline and provide regular sales forecasts and progress reports.</p><p>Monitor market trends, competitor activities, and upcoming projects.</p><p>Support prequalification submissions, vendor registrations, and framework agreements.</p><p>Participate in exhibitions, conferences, and industry networking events to enhance business visibility.</p><p>Business Development</p><p>Technical Sales</p><p>Client Relationship Management</p><p>Proposal Preparation</p><p>Lead Generation</p><p>Tender Management</p><p>Presentation Skills</p><p>Negotiation Skills</p><p>Market Intelligence</p><p>Strategic Planning</p><p>Number of new clients developed.</p><p>Number of qualified opportunities generated.</p><p>Value of proposals submitted.</p><p>Proposal-to-order conversion rate.</p><p>Annual sales/revenue achieved.</p><p>Customer satisfaction and retention.</p><p>Growth of key accounts and repeat business.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Mechanical, Fire Protection, Instrumentation, Electrical Engineering, or a related discipline.</li><li>10+ years of experience in business development, sales, or technical marketing within Fire Protection, Fire &amp; Gas Consultancy.</li><li>Experience in Oil &amp; Gas, Petrochemical, Industrial, Power, Infrastructure, or Commercial projects.</li><li>Knowledge of Fire Protection Systems, Fire Detection &amp; Alarm Systems, Gas Detection Systems, Passive Fire Protection.</li><li>Experience in the field of Sales and business development in Fire Protection and Fire &amp; Gas detection system Vendors in Kuwait</li><li>Familiarity with NFPA, API, IEC, FM, ISO, and client standards (e.g., KNPC, KOC and Other industrial clients) is an advantage.</li><li>Proven experience in proposal preparation, client presentations, and contract negotiations.</li><li>Excellent communication, presentation, negotiation, and interpersonal skills.</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook);</li><li>Valid Kuwait driving license is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Experience in Maintenance of protective equipments involved in EHV, HV and LV substations. He should have theoretical and practical knows how of all types of protection relays including Bus Bar protection relays. He should be able to test and maintain battery charger and electronic circuit in the Substation. He should be able to use all types of test kits and well versed in drawing and testing of protection relays.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / B Tech in Electrical Engineering</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including mechanical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform mechanical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for mechanical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, PDMS, Smart Plant, CAESAR II, PV Elite or similar).</p></li><li><p>Strong understanding of mechanical systems, codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 10years of experience in mechanical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based / Transferable Visa</p></li></ul><p><br></p><p></p></section>