وظائف مهندسين في الكويت

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><p>An Associate s degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field. Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards. I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years. Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems. Must have an Active Secret US Government Clearance. US Citizenship is required to obtain a Secret Clearance.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Own the SF-domain integrated schedule, cost and performance view, focusing on interfaces, scenarios, forward-looking risk, and cost implications.</p></li><li><p>Acts as the SF manager’s technical guardian across engineering deliverables, without duplicating EPCC design authority.</p></li><li><p>Integrate EPCC, and other interface discipline inputs into SF view or project</p></li><li><p>Forecast scenarios, what-if cases, identify schedule clashes</p></li><li><p>Track schedule performance (SPI), critical paths, milestones, and key handovers</p></li><li><p>SF cost/budget/variation order control, VOWD / CPI performance tracking</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Holds a bachelor's degree in engineering</p></li><li><p>8-10+ years oil &amp; gas projects</p></li><li><p>In EPC workflows, project controls</p></li><li><p>Primavera P6 (preferred)</p></li><li><p>Strong Microsoft Project (mandatory).</p></li><li><p>Competence in project performance metrics</p></li><li><p>Comfortable challenging EPC logic and assumptions</p></li><li><p>Good interpersonal skills to enable data exchange and collaboration</p></li><li><p>Kuwait based / Valid driving license / Transferable visa</p><p><br></p></li></ul><p></p></section>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>An Associate's degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E.</li><li>OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li><li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li><li>I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li><li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li><li>Must have an Active Secret US Government Clearance.</li><li>US Citizenship is required to obtain a Secret Clearance.</li></ul>

<p>Erection Engineer</p><p>&nbsp;</p><p>Bachelor Degree in Electrical Engineering according to Kuwait Bachelor Standard. Atleast 4 Years</p><p>7 Years of Minimum Experience</p><p>&nbsp;</p><p>Key Responsibilities</p><p>Shall have experience in installation of Indoor Gas Insulated Switchgear Substation Projects with exposure of 132KV to 400KV voltage level.&nbsp; Responsible to supervise all the activities at Substation as per Client’s requirement, in concern to complying project task with quality and under required safety measures.&nbsp;&nbsp;</p><p>&nbsp;</p><p>To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HVAC works and to resolve arising site issues.&nbsp;&nbsp;</p><p>&nbsp;</p><p>Shall have good communication skills and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works.</p><p>&nbsp;</p><p>Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, material requisition etc.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>ASAB ESS: Engineering Technician (Secret Clearance)<br><br><p><b>Belong, Connect, Grow, with KBR! </b></p><br><br><br><p><b>Program Summary</b></p><br><br><p>Under the AFCAP V Program, KBR supports the U.S. Air Force by providing Engineering Support Services to the 378 ECES. These services ensure mission-critical Installation Engineering, Asset Management and Visibility, and Real Property support to the 378 AEW. In addition to Engineering Support Services at Prince Sultan Air Base, KBR also provides food services and other quality-of-life support to sustain base operations.</p><br><br><br><p><b>Job Summary</b></p><br><br><p>The Engineering Technician supports installation engineering, construction management, surveying, drafting, and geospatial data development for ASAB. This role provides technical support across planning, project execution, GIS, and documentation activities to ensure facilities and infrastructure data remains accurate, compliant, and mission-ready.</p><br><br><br><p><b>Roles and Responsibilities </b></p><br><br><ul><li><p>Perform surveying, drafting, construction management, and project management support functions</p><br><br></li><li><p>Develop and maintain technical drawings, maps, and geospatial datasets using AutoCAD and GIS software</p><br><br></li><li><p>Support construction inspections, documentation, and quality assurance activities</p><br><br></li><li><p>Assist with maintaining as-built drawings, facility records, and infrastructure documentation</p><br><br></li><li><p>Support GeoBase, CIP, MDS, and MDL updates in compliance with SDSFIE and Air Force standards</p><br><br></li><li><p>Conduct field surveys including topographic, boundary, and utility surveys</p><br><br></li><li><p>Assist with airfield obstruction data updates and waiver documentation</p><br><br></li><li><p>Support site preparation coordination, permits, and utility outage documentation</p><br><br></li><li><p>Ensure engineering documentation is accurate, complete, and compliant with Government requirements</p><br><br></li></ul><br><p><b>Basic Qualifications </b></p><br><br><br><ul><li><p>Must be a U.S. Citizen with a current U. S. Driver's License.</p><br><br></li><li><p>Must possess passport book (not passport card) with at least 13 months of remaining validity AND 6 blank visa/stamp pages remaining.</p><br><br></li></ul><br><ul><li><p>Minimum three (3) years combined experience in surveying, drafting, construction management, and project management</p><br><br></li><li><p>At least one (1) year of recent experience using AutoCAD and GIS software</p><br><br></li><li><p>Two (2) years of experience working with public or government organizations</p><br><br></li><li><p>Proficiency in technical drawings, maps, and geospatial data</p><br><br></li><li><p>Ability to obtain and maintain a SECRET security clearance</p><br><br></li><li><p>Willingness to sign a Non-Disclosure Agreement (NDA)</p><br><br></li></ul><br><p><b>Preferred Qualifications</b></p><br><br><ul><li><p>Experience supporting Air Force Civil Engineering programs</p><br><br></li><li><p>Familiarity with GeoBase, ArcGIS Pro, and SDSFIE standards</p><br><br></li><li><p>Experience working in contingency or overseas environments.</p><br><br></li></ul><br><p><b>KBR Benefits</b></p><br><br><p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p><br></p><p>1. HVAC Design &amp; Equipment Selection</p><p>•Review project drawings, specifications, BOQs, and tender documents.</p><p>•Perform cooling load calculations when required and review project cooling requirements.</p><p>•Design and select VRF systems based on project requirements and manufacturer guidelines.</p><p>•Select indoor units, outdoor units, controls, accessories, and other related equipment.</p><p>•Prepare refrigerant piping layouts and verify piping limitations and system capacities.</p><p>•Prepare equipment schedules and detailed BOQs.</p><p>•Support the selection of packaged units, ducted split systems, and other DX air-conditioning equipment when required.</p><p>•Optimize equipment selections to provide technically compliant and commercially competitive solutions.</p><p>2. Technical Proposals &amp; Submittals</p><p>•Prepare complete technical proposals and equipment selections for projects.</p><p>•Prepare technical submittals including datasheets, equipment schedules, compliance statements, selection reports, drawings, and supporting documents.</p><p>•Review project specifications and prepare detailed compliance statements.</p><p>•Identify deviations from project specifications and propose suitable technical alternatives.</p><p>•Coordinate technical submittals with the sales team before submission to consultants and customers.</p><p>3. Sales &amp; Tender Support</p><p>•Provide technical support to Sales Engineers during tendering and quotation stages.</p><p>•Review customer enquiries and recommend the most suitable HVAC solution.</p><p>•Assist the sales team in preparing accurate BOQs and equipment cost requirements.</p><p>•Support value engineering exercises to improve competitiveness while maintaining project requirements.</p><p>•Attend technical meetings with consultants, contractors, and customers when required.</p><p>•Conduct technical presentations and explain proposed VRF solutions to customers and consultants.</p><p>•Support the sales team during technical negotiations and clarification meetings.</p><p>4. Project &amp; Technical Coordination</p><p>•Coordinate with consultants, MEP contractors, main contractors, and customers regarding technical requirements.</p><p>•Review approved drawings and BOQs before order placement to ensure correct equipment selection.</p><p>•Coordinate with suppliers/manufacturers regarding technical clarifications and special project requirements.</p><p>•Support the project and after-sales teams with technical information during installation and commissioning when required.</p><p>•Review site conditions when necessary and provide recommendations related to equipment application and installation.</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Requirements</p><p><b>Educational Qualifications</b></p><p>Education Degree</p><p>: Bachelor</p><p>Major</p><p>: Mechanical Engineering</p><p><b>Experience</b></p><p>Years of Experience</p><p>: 3 - 5&nbsp;&nbsp;Years</p><p><br></p><p>Field of Experience</p><p><br></p><p>: HVAC application engineering, design, VRF systems, or technical support.</p><p><br></p><p><b>Skills</b></p><p><br></p><p>•Strong technical knowledge of VRF systems and commercial HVAC applications.</p><p>•Strong knowledge of VRF selection and design software.</p><p>•Good understanding of cooling load calculations and HVAC design principles.</p><p>•Ability to read and interpret mechanical drawings, specifications, and BOQs.</p><p>•Good knowledge of refrigerant piping design and VRF system limitations.</p><p>•Knowledge of HVAC controls, central controllers, and BMS integration would be an advantage.</p><p>•Good understanding of equipment selection and technical comparison between different HVAC solutions.</p><p>•Strong analytical and problem-solving skills.</p><p>•Good communication and technical presentation skills.</p><p>•Ability to handle multiple projects and tender submissions simultaneously.</p><p>•Proficiency in AutoCAD &amp; good knowledge of Microsoft Office applications</p><p><b>Other Requirements</b></p><p>Gender</p><p>: Male</p><p>Age</p><p>: 25 - 40&nbsp;&nbsp;Years</p><p>Preferred Language</p><p>: Arabic, English</p><p>Duty Shift / Timings</p><p>: One Shift / 8:00AM to 4:00PM</p><p>Salary &amp; Benefits</p><p>Salary</p><p>: Attractive Salary</p><p>Other Benefits</p><p>: As per the company policy.</p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a talented Process Engineer with upstream project experience in the oil and gas sector to join our dynamic team. In this pivotal role, you will be responsible for designing, implementing, and optimizing processes that enhance efficiency and effectiveness in our projects. Your expertise will directly contribute to our mission of delivering high-quality results while adhering to safety and environmental standards. This position offers a unique opportunity to work in a collaborative environment where innovation is encouraged and valued.</p><p>As a Process Engineer, you will engage with cross-functional teams, providing your insights to shape the future of our projects. We pride ourselves on fostering a culture of continuous improvement and professional development. You will have access to training programs and mentorship from industry leaders, allowing you to expand your skill set and advance your career. Our commitment to employee growth ensures that you will find ample opportunities to progress within the organization, taking on greater responsibilities as you prove your capabilities.</p><p>In this role, you will have the chance to make a strategic impact on our operations, influencing key decisions that drive project success. Your contributions will not only enhance our current projects but also help us innovate and explore new avenues in the oil and gas sector. Join us and be part of a forward-thinking company that values your input and strives for excellence in every endeavor.</p><p><b>Responsibilities:</b></p><ol><li>Develop and implement process designs for upstream oil and gas projects, utilizing simulation software to optimize production efficiency and reduce costs.</li><li>Conduct feasibility studies and process evaluations to identify areas for improvement, ensuring alignment with project goals and industry standards.</li><li>Collaborate with multidisciplinary teams to integrate process engineering solutions into project planning, ensuring seamless execution and adherence to timelines.</li><li>Monitor and analyze process performance data, using statistical tools to identify trends and recommend corrective actions when necessary.</li><li>Prepare technical documentation and reports for internal and external stakeholders, clearly communicating process designs and improvements.</li><li>Provide technical support during project execution, troubleshooting issues and implementing solutions to minimize downtime and enhance productivity.</li><li>Conduct risk assessments and develop safety protocols to ensure compliance with health, safety, and environmental regulations throughout project lifecycles.</li><li>Participate in project reviews and audits, providing insights and recommendations for continuous improvement and best practices.</li><li>Mentor junior engineers and interns, sharing knowledge and fostering a culture of learning and development within the team.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong analytical skills to evaluate complex process systems and identify optimization opportunities.</li><li>Proficiency in process simulation software such as Aspen HYSYS or similar tools.</li><li>Excellent communication skills for effective collaboration with cross-functional teams and stakeholders.</li><li>In-depth knowledge of industry standards and regulations related to oil and gas operations.</li><li>Ability to conduct feasibility studies and risk assessments to inform project decisions.</li><li>Experience in project management methodologies to ensure timely and successful project delivery.</li><li>Strong problem-solving skills to troubleshoot process-related issues and implement effective solutions.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Prepare and maintain detailed project schedule using planning software (e.g., Primavera P6, MS Project).</li><li>Monitor project progress and update schedule accordingly.</li><li>Identify potential delays and propose mitigation measures.</li><li>Coordinate with project mangers, engineers to ensure alignment with project objectives.</li><li>Prepare progress reports and dashboards for management review.</li><li>Ensure compliance with project requirements, standard, and deadlines.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's degree in Civil Engineering.</li><li>Minimum experience 5 years as a Planning Engineer in construction projects.</li><li>Strong knowledge of project planning tools (Primavera P6, MS Project).</li><li>Excellent analytical, problem solving, and organizational skills.</li><li>Strong communication and team work abilities.</li><li>Ability to work under pressure and meet deadlines.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Mechanical Engineer ensures the safety, efficiency, and continuous operation of a facility’s water, sanitation, and fire suppression systems. They conduct routine inspections, manage preventive maintenance schedules, troubleshoot system failures, and ensure full compliance with international safety standards and local regulations.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Responsibilities:</p><ul><li>Lead preventive and corrective maintenance (PM/CM) operations on plumbing and fire protection systems.</li><li>Troubleshoot faults, leaks, or pressure drops in domestic water, drainage, sewage, and firefighting systems.</li><li>Oversee the servicing of fire pumps, hydrants, standpipes, wet/dry risers, and sprinkler or clean-agent suppression systems.</li><li>Ensure all building operations comply with NFPA, local fire department mandates, and international plumbing codes.</li><li>Regularly audit, test, and recertify backflow preventers, fire alarms, and fire-rated barriers.</li><li>Conduct fire risk assessments and develop mitigation strategies for existing facility structures.</li><li>Supervise on-site technicians and review the performance of external maintenance contractors.</li><li>Evaluate proposed modifications or retrofits and write clear technical specifications for vendor procurement.</li><li>Candidates must be bilingual.</li><li>Should have a valid Kuwait Driving License.</li><li>Bachelor of Mechanical Engineering Degree.</li><li>Required minimum <b>10 years of experience</b> in the related field.&nbsp;</li></ul><p><br></p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>To be responsible for the execution, supervision, and technical coordination of electrical works on site, ensuring compliance with contract specifications, approved drawings, and applicable codes (NFPA/IEC/local authority requirements as applicable to KNPC-regulated projects). The candidate will coordinate with the Project Manager, subcontractors, and Client/Consultant representatives to ensure timely execution, quality control, and adherence to safety standards.</p><p><br></p><p><b>Experience:</b> Minimum 10 years' relevant experience in electrical engineering, preferably within MEP/construction contracting environment</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's degree in Electrical Engineering</li><li>Minimum 10 years' experience in electrical works within oil &amp; gas, industrial, or institutional construction projects</li><li>Prior experience with KNPC or similar authority-regulated projects preferred</li><li>Hands-on experience in fire alarm systems installation, testing, and commissioning</li><li>Strong knowledge of power distribution, lighting, cabling, and electrical systems installation, testing, and commissioning</li><li>Familiarity with NFPA and local fire authority (Kuwait Fire Force) requirements</li><li>Experience in shop drawing review, material submittals, and as-built documentation</li><li>Professional command of English (spoken and written) for technical correspondence and reporting</li><li>Valid Kuwait driving license and transferable residency</li><li>Ability to work full-time on-site on a daily basis</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li><span>Familiar with and knowledgeable in Permit to Work (PTW) systems applicable to Oil &amp; Gas operations.</span></li><li><span>Responsible for overseeing and executing all field instrumentation activities (Fire Alarm, Gas Detection, and Fire Suppression Systems and Load shifting), including installation, testing, pre-commissioning, and commissioning during the construction phase.</span></li><li><span>Verify that all activities are carried out in compliance with IFC drawings, approved method statements, and Inspection Test Plans (ITPs).</span></li><li><span>Supervise instrumentation works such as cable pulling, cable termination, tubing installation, junction box installation, and panel wiring activities.</span></li><li><span>Coordinate and assign daily work activities to subcontractors and submit daily progress reports to the Engineer.</span></li><li><span>Ensure the safe installation, testing, and commissioning of instrumentation and control systems, including field devices, control panels, junction boxes, and cabling, in accordance with approved drawings and project specifications.</span></li><li><span>Ensure proper segregation and routing of signal, control, and power cables during installation.</span></li><li><span>Witness and support functional testing, loop checking, and pre-commissioning activities in coordination with QA/QC and commissioning teams.</span></li><li><span>Assist in the preparation, tracking, and closure of punch list items arising from inspections, pre-commissioning, and commissioning activities.</span></li><li><span>Maintain red-line mark-up drawings and support the design team during as-built documentation, loop folders, and handover dossiers.</span></li><li><span>Coordinate closely with electrical, mechanical, and process disciplines to ensure smooth execution of multidisciplinary activities.</span></li><li><span>Work in collaboration with the commissioning team to plan and execute system energization and loop testing activities.</span></li><li><span>Ability to Supervise the load shifting of DCS, ESD.</span></li><li><span>Liaise with client representatives to facilitate inspections, obtain approvals, and provide progress updates.&nbsp;</span></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>ASAB ESS: Electrical Engineer (Secret Clearance)<br><br><p><b>Belong, Connect, Grow, with KBR! </b></p><br><br><br><p><b>KBR Government Solutions</b> delivers full life cycle professional and technical solutions that improve operational readiness and drive innovation. Our solutions help ensure mission success on land, air, sea, space and cyberspace for the Department of Defense, intelligence community, NASA and other federal agencies. KBR’s areas of expertise include engineering, logistics, operations, science, program management, mission IT and cybersecurity.</p><br><br><br><p>Our people make the world a more productive, efficient and fascinating place. And that's only the beginning.</p><br><br><br><p>The <b><i>Ali Al Salem Air Base </i></b>shall provide architectural and engineering services that support project, work order, and work request operations.&nbsp;</p><br><br><br><p>These functions are to ensure the delivery of&nbsp;BASE OPERATING SUPPORT-INSTALLATION (BOS-I) services to the 378 Air Expeditionary Wing (AEW), mission partners, and tenant units, including transient, temporary duty (TDY), permanent party, and rotational personnel.</p><br><br><br><p><b>RESPONSIBILITIES:</b></p><br><br><ul><li>Knowledge and Familiarity with War Reserve Material (WRM) assets</li><li>Efforts include planning for repair and maintenance, designing, providing technical support, and updating record drawings.</li><li>Provide effective Electrical Engineering support to ensure projects are designed and completed to support mission requirement based on guidance from 378 Engineering Flight Chief.</li><li>Develop and administer Activity/Asset Management Plans (AMP) that translates Air Force and installation objectives into asset-related decisions by understanding assets’ physical attributes, condition, usage, and performance as well as the realized and potential value to the mission. These plans should balance risk, current and future objectives, resource limitations, and lifecycle management.</li><li>As required, be available within two (2) hours of notification to meet on the installation with Government personnel.</li><li>Design and develop designs along with scope of work in support of various projects on PSAB.</li><li>Provide frequent updates to the 378 Engineering Flight Chief along with briefings upcoming projects prior to sending to 378 ECONS for solicitation.</li><li>Ensure compliance with all US laws, Kuwait Labor Law, US EPA Guidelines, Final Governing Standards (FGS), Overseas Environmental Baseline Guidance Document (OEBGD), US Building Codes, Department of Defense (DoD) Unified Facilities Criteria (UFC), National Electric Code (NEC), National Electric Safety Code (NESC), Occupational Safety and Health Administration (OSHA) standards, National Fire Protection Association (NFPA) and Institute of Electrical and Electronics Engineering (IEEE) standards. In addition, ensure site activities comply with applicable US, DoD, and Host Country codes and standards to include American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), International Plumbing Code (IPC), National Plumbing Code (NPC), Building &amp; Fire codes concerning health, safety, and the environment in the design and construction of real property facilities at all times.</li><li>Performs other duties as assigned.</li></ul><br><p><b>MATERIAL &amp; EQUIPMENT DIRECTLY USED: </b></p><br><br><ul><li>May be exposed to potentially hazardous conditions that require wear of hard hats, gloves, steel toed boots, hearing protection, safety glasses and other personal protection equipment (PPE); may be required to push, pull and lift heavy equipment.</li><li>Use of Land Mobile Radios, cell phones, laptop, and other devices to maintain contact and accountability of work activities.</li></ul><br><p><b>WORKING ENVIRONMENT:</b></p><br><br><ul><li>Work will be indoors and outdoors.</li><li>Exposure to heat, cold, dust, noise, chemicals may occur.</li><li>Overtime and shift work may be required depending on contractual needs as well as occasional to frequent travel.</li><li>Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions.</li><li>Task specific work environment training maybe provided.</li><li>Must be prepared to function in a wartime or contingency environment to support&nbsp;U.S. interests.</li></ul><br><p><b>PHYSICAL ACTIVITIES:</b></p><br><br><ul><li>Physical requirements include lifting up to 35lb, team lifting up to 50lbs, climbing, extended sitting, or standing, stooping, stretching, and bending.</li><li>Work may require using and wearing personal protective equipment such as, hearing and eye protection, hard hat and steel-toed boots as well as Individual Protective Equipment (IPE) which may include but not limited to Level III plus/IV Individual Body Armor with both front and back ballistic plates, ACH helmet, clothing (undergarments, shirts and pants and/or coveralls), reflective vests/belts, sound suppression devices, etc.</li><li>Day-to-day physical requirements may involve standard office activities including sitting/standing for extended periods of time, attending meetings, use of keyboard and mouse repetitively, lifting and carrying less than 20 lbs. frequently, etc.</li><li>Work requires moderate physical exertion including walking to operating areas and walking up stairs</li></ul><br><p><b>BASIC QUALIFICATIONS:</b></p><br><br><p>Specific contract requirements regarding education and experience will prevail.</p><br><br><ul><li>Bachelor’s Degree in Electrical Engineering with 3 years relevant experience on similar projects.</li><li><b>Must be a U.S. Citizen with a current U. S. Driver's License.</b></li><li><b>Must possess passport book (not passport card) with at least 13 months of remaining validity AND 6 blank visa/stamp pages remaining</b></li><li><b>Must have and maintain a valid U. S. SECRET Security Clearance or ability to obtain a secret clearance before deploying. </b></li><li>Must be able to read, write, speak, and understand English fluently</li><li>Candidate must also meet <b>CENTCOM MOD-15</b> theater requirements.</li></ul><br><p><b>SKILLS:</b></p><br><br><ul><li>Project management, pro-active, well organized, results-oriented, and team player with decision-making ability.</li><li>Use computers &amp; related software such as Microsoft Office and other common products used in office environments or within the Engineering and Construction Industry.</li><li>Able and willing to work periods of long hours to meet mission requirements.</li><li>Excellent interpersonal and communication skills with documented supervisory experience.</li><li>Experience in contingency environments as well as knowledge &amp; experience working with government contracts.</li></ul><br><p><b>KBR Benefits</b></p><br><br><p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Overview</b><br><p>Come build community, explore your passions and do your best work at Microsoft with thousands of University interns from every corner of the world.&nbsp;This opportunity will allow you to bring your aspirations, talent, potential—and excitement for the journey ahead.&nbsp;&nbsp;</p><br><p>As a Solution Engineer Intern, you will engage with customers, with coaching from others. You will have the opportunity to shadow customer stakeholder interactions and research customer context to gain and understanding and build product expertise. You will contribute to technical wins, or portions of technical wins, with support from peers through preparation and delivery of one-way presentations.</p><br><p>At Microsoft, interns work on real-world projects in collaboration with teams across the world, while having fun along the way. You’ll be empowered to build community, explore your passions and achieve your goals. This is your chance to bring your solutions and ideas to life while working on cutting-edge technology.&nbsp;</p><br><p>Microsoft’s mission is to empower every person and every organization on the planet to achieve more. As employees we come together with a growth mindset, innovate to empower others, and collaborate to realize our shared goals. Each day we build on our values of respect, integrity, and accountability to create a culture of inclusion where everyone can thrive at work and beyond.</p><br><br><b>Responsibilities</b><br><p><strong>Program start date: January 2027</strong></p><br><p><strong>About: </strong>This program is tailored for&nbsp;Kuwaiti&nbsp;Nationals, aiming to accelerate Kuwaiti employability and create market impact through Early-in-Profession recruitment, and skilling programs.&nbsp;</p><br><p><strong>Program overview: </strong>This internship is a paid six-month training program that offers globally recognized technical and professional certifications &amp; skills, and on-the-job training to include mentoring, coaching, job shadowing and real-life scenario assignments.</p><br><p><strong>Program Details:&nbsp;The 6 months, full-time</strong>&nbsp; program is divided into two key phases (Phase 1 - Onboarding &amp; Skilling, Phase 2 - On The Job Training)</p><br><p><strong>Phase one</strong>:&nbsp;<em>Onboarding &amp; Skilling Bootcamp (1 month)</em></p><br><ul><li><ul><li>Onboarding and introduction to Microsoft’s mission, culture, strategy &amp; structure.</li><li>Technical skilling to obtain globally recognized Microsoft technical certifications.</li><li>Professional and soft skilling courses including project management, change management, effective interpersonal skills, creativity and innovation, and time management.</li></ul></li></ul><p><strong>Phase two:</strong>&nbsp;<em>On-the-job training (5 months)</em></p><br><ul><li><ul><li>Joining as a <strong>Solution Engineer Intern</strong>&nbsp;for on-the-job shadowing and training.</li><li>Mentorship and coaching sessions.</li><li>Supporting Microsoft teams in digital transformation projects.</li><li>Advanced technology trainings including AI, Machine Learning &amp; Cloud Computing.</li></ul></li></ul><p><strong>Responsibilities:</strong></p><br><ul><li>You build awareness of need for product strategy based on customer feedback, and build awareness of need for compete strategies.</li><li>You will consume and leverage readiness materials to expand domain knowledge, and begin connecting with customers and promote internal team readiness.</li><li>You will engage with customer, with coaching from others. You will shadow in customer stakeholder interactions and research customer context to gain understanding and build product expertise. You will develop awareness of available resources by familiarizing yourself with the community and engaging others to gain product knowledge.</li><li>You will develop foundational awareness of working with reference architectures and assist in demonstrations of specific Microsoft products through preparation and execution.</li></ul><br><b>Qualifications</b><br><p><strong>Minimum Qualifications</strong></p><br><ul><li>Currently pursuing/ completed a Bachelor's/ Master's Degree in Information Technology (IT), Computer Science, Engineering, Business Administration, Business, or related field.&nbsp;</li><li>Kuwaiti Nationality.</li><li>Legally authorized to work in Kuwait (Legally authorized = Has citizenship or has been granted a valid visa or work permit).&nbsp;</li><li>Fluency in English.</li></ul><p><strong>Preferred Qualifications </strong></p><br><ul><li>Passion for technology and customer obsessed.</li><li>Excellent verbal and written communication, analytical and presentation skills. </li><li>Strong Desire and business acumen for consultative solution selling.</li><li>Exceptional negotiation, customer service, and interpersonal skills.</li></ul><p>#EiP #MCAPSEiP</p><br> <br><p>This position will be open for a minimum of 5 days, with applications accepted on an ongoing basis until the position is filled.</p><br><br><br><p>Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about <b><u>requesting accommodations.</u></b></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Kuwait </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Frontier coding agents are already good at passing tests.<br> We measure whether they pass them the right way .<br>We're building a dataset to evaluate the safety and conduct of AI coding agents — not just whether they complete a task, but whether they do it honestly, within scope, and without cutting corners.<br>You'll design tasks where the easy path is the unsafe one, and write the tests that catch it: Build realistic developer environments — a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks that pair a benign development goal with a tempting unsafe shortcut: scope creep, policy violations, data corruption, over-permissive changes Write tests that verify whether the agent completed the task the right way — catching corners cut, not just checking outputs Iterate on tasks and tests based on QA feedback — review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling; Not prompt engineering; Not cybersecurity or red-teaming — there is no attacker in the scenario.<br> Cybersecurity experience is a nice-to-have but not a requirement.<br> We're looking for engineers who understand how code should behave, not penetration testers.<br> Strong software engineers, not security specialists; Not writing code from scratch — the agent writes most of the code; you design the situation and evaluate the outcome; What we look for 4–5+ years in software development; Core stack: Python, JavaScript/TypeScript; Strong test design skills — functional and integration tests that separate safe from unsafe completion, not just correct from incorrect; Hands-on experience with coding agents (Claude Code, GitHub Copilot CLI, Codex, or similar); Familiarity with GitHub PRs and CI workflows as a user; Stack breadth is welcome, not a filter.<br> Tasks simulate real repositories with databases, CI pipelines, and deploy scripts, so wider backend and infrastructure exposure is genuinely useful — but you don't need to be an expert in every layer; English proficiency — B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> The real difficulty is building the temptation — a scenario where the unsafe or out-of-scope path is the path of least resistance — and then writing tests that reliably catch an agent that took it.<br> Tasks have many valid solutions; tests must accept all of them and reject the bad ones.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Project time expectations For this project, tasks are estimated to require around 20-25 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation On this project, contributors can earn up to $75 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The IT Manager owns the Group IT strategy and the Odoo ERP deployment programme — the single most important enabler of the Group's operational transformation. The role governs the Odoo platform across all Group entities and modules (Finance, Manufacturing, Maintenance, Field Service, CRM, Quality, Purchase, Inventory), manages IT infrastructure and cybersecurity, and acts as technology business partner to every functional department.</p><p><br></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Odoo deployment leadership: </b>lead the phased rollout of Finance, Manufacturing, Maintenance, Field Service, CRM, Quality, Purchase and Inventory modules across all Group entities.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>IT architecture: </b>define and maintain the Group's servers, network, VPN, backup and security architecture.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Access &amp; data governance: </b>manage user access rights and data governance across Odoo and all Group systems.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>IT support: </b>provide support to all Group users, with a target resolution time under 4 hours for critical issues.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Vendor management: </b>manage external IT vendors — the Odoo implementation partner, hardware suppliers, ISP.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Cybersecurity: </b>own access control, patch management and incident-response governance, targeting zero critical cybersecurity incidents.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Functional requirements coordination: </b>work with each Department Head to translate operational requirements into Odoo module configuration, coordinating directly with the Factory Manager, Installation Manager, Maintenance Manager, CFO, CPO and Quality Manager.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>User training: </b>train key users ahead of each Odoo deployment wave to drive adoption.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>•&nbsp;&nbsp;&nbsp;&nbsp;Degree in Computer Science, Information Systems, or equivalent</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;8+ years in IT management with hands-on ERP deployment experience</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Odoo technical or functional expertise strongly preferred</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Experience in multi-entity, multi-site environments</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Cybersecurity certification an advantage (CISSP, CompTIA Security+)</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Strong English required; Arabic an advantage</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Mechanical Engineer</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Power Generation</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Maintain and troubleshoot mechanical systems in a large-scale power plant.<br></li><li>Perform preventive and predictive maintenance on plant equipment.<br></li><li>Inspect turbines, pumps, compressors, boilers, and auxiliary systems.<br></li><li>Coordinate shutdown and maintenance activities.<br></li><li>Ensure compliance with plant safety and maintenance standards.<br></li><li>Analyse equipment failures and recommend corrective actions.<br></li><li>Prepare maintenance reports and technical documentation.<br></li><li>Support continuous improvement initiatives for plant reliability.<br></li></ul>Required Skills<br><ul><li>Power Plant Mechanical Maintenance – Experience maintaining large-scale power plant equipment.<br></li><li>Rotating Equipment – Expertise in turbines, pumps, compressors, and motors.<br></li><li>Preventive Maintenance – Planning and executing maintenance schedules.<br></li><li>Troubleshooting – Root cause analysis of mechanical failures.<br></li><li>Safety Compliance – Knowledge of industrial safety practices and standards.<br></li></ul>Preferred Skills<br><ul><li>SAP PM or CMMS knowledge.<br></li><li>Shutdown maintenance planning.<br></li><li>Leadership and team coordination.<br></li></ul>Work Experience Requirements<br><p>Candidates should possess a minimum of <b>10 years of experience</b> in mechanical maintenance within large-scale power plants. Experience handling critical plant equipment and maintenance planning is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.E. Mechanical Engineering<br></li><li><b>Preferred:</b> M.E. Mechanical Engineering<br></li><li><b>Additional Certifications:</b> Power Plant Maintenance, NEBOSH or equivalent (preferred)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Electrical Engineer</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Power Generation</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Maintain and troubleshoot electrical systems in a large-scale power plant.<br></li><li>Perform preventive and corrective maintenance of electrical equipment.<br></li><li>Ensure reliable operation of transformers, switchgear, and motors.<br></li><li>Monitor electrical distribution systems for safe and efficient performance.<br></li><li>Coordinate shutdown and maintenance activities.<br></li><li>Ensure compliance with electrical safety standards and regulations.<br></li><li>Prepare maintenance reports and technical documentation.<br></li><li>Support continuous improvement initiatives for plant reliability.<br></li></ul>Required Skills<br><ul><li>Power Plant Electrical Maintenance – Experience in utility-scale power plants.<br></li><li>High Voltage Systems – Handling HV equipment safely.<br></li><li>Electrical Troubleshooting – Diagnose and resolve electrical faults.<br></li><li>Switchgear &amp; Transformers – Maintenance and operation.<br></li><li>Electrical Safety Standards – Compliance with industrial safety practices.<br></li></ul>Preferred Skills<br><ul><li>Protection Relay Knowledge<br></li><li>SCADA/DCS Exposure<br></li><li>SAP Maintenance Module Experience<br></li></ul>Work Experience Requirements<br><p>Candidates should have a minimum of <b>10 years</b> of experience in electrical maintenance within a large-scale power plant environment. Experience with power generation equipment, high-voltage systems, and industrial maintenance practices is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.E. Electrical<br></li><li><b>Preferred:</b> Master's Degree in Electrical Engineering (Typical)<br></li><li><b>Additional Certifications:</b> Industrial Electrical Safety / HV Switching Certification (Typical)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>1.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Organize and administer the Maintenance Department, ensuring that effective work control and productivity are maintained, whilst using every means to increase productivity and reduce costs.</span></p> <p><span><span>2.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Direct and supervise the implementation of an effective trouble report system, together with other day-to-day works of general maintenance and repair to ensure that the building, its contents and its surroundings are at all times in first-class condition throughout</span></p> <p><span><span>3.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Identify and arrange for all necessary work to maintain a high standard whether mechanical, electrical or civil, to be completed in a timely manner.</span></p> <p><span><span>4.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Ensure that a full preventive maintenance schedule exists for every item of mechanical and electrical plant or equipment,</span></p> <p><span><span>5.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Negotiate terms and conditions for all manufactures / agents and service contracts with the assistance of the controller.</span></p> <p><span><span>6.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Keep up-to-date records of all test certificates / licenses</span></p> <p><span><span>7.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Conduct frequent meetings with other Department Heads to review the current performance of their equipment.</span></p> <p><span><span>8.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Participate in assessing the long-term requirements of the Mall, including overhaul / rehabilitation programs or renewal / replacement works, etc. In conjunction with TMM General Manager – Maintenance.</span></p> <p><span><span>9.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Responsible for budgeting and financial planning for the Maintenance Department</span></p> <p><span><span>10.<span>&nbsp; </span></span></span><span>Perform other related duties as assigned or requested</span></p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 7+ years </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The SOC Engineer is responsible for the design, implementation, configuration, and continuous optimization of ZainTECH's Security Operations Centre (SOC) technology platforms, ensuring secure, scalable, and resilient security monitoring services for enterprise and government customers across the MENA region.<br> This is a hands-on engineering role focused on designing and maintaining Security Information and Event Management (SIEM), Security Orchestration, Automation and Response (SOAR), and supporting security technologies.<br> The role owns the end-to-end lifecycle of security monitoring capabilities - from onboarding new log sources and developing detection content to automating operational workflows and continuously enhancing SOC performance - while ensuring solutions align with customer requirements, cybersecurity best practices, and operational standards.<br> Responsibilities: SIEM &amp; Security Platform Engineering Design, implement, configure, and maintain enterprise SIEM and SOAR platforms supporting ZainTECH's Managed Security Services portfolio.<br> Deploy and maintain highly available, scalable, and secure SOC infrastructure across customer environments.<br> Manage platform upgrades, patching, configuration management, and lifecycle activities to ensure platform stability and performance.<br> Ensure SOC technologies remain aligned with operational, security, and customer requirements.<br> Detection Engineering &amp; Security Content Develop, maintain, and optimise SIEM detection content, including correlation rules, dashboards, reports, alerts, watchlists, and use cases.<br> Improve detection capabilities by analysing emerging threats, attack techniques, and operational trends.<br> Reduce false positives through continuous tuning and refinement of detection logic.<br> Map detection capabilities to recognised cybersecurity frameworks such as MITRE ATT&amp;CK.<br> Platform Integration &amp; Automation Integrate security technologies, cloud platforms, infrastructure, and third-party solutions into the SIEM ecosystem.<br> Develop custom parsers, connectors, and data ingestion mechanisms to support new customer environments.<br> Design and implement SOAR playbooks to automate investigation, enrichment, notification, and response activities.<br> Optimise data collection, normalisation, and event processing to improve operational efficiency.<br> Operational Support &amp; Continuous Improvement Provide technical support to SOC Analysts during security investigations and major incident response activities.<br> Troubleshoot platform issues and perform root cause analysis to maintain service availability.<br> Produce technical documentation, implementation guides, and operational runbooks.<br> Identify opportunities to improve SOC maturity through automation, process optimisation, and engineering best practices.<br> Collaborate with Cybersecurity Consulting, Incident Response, Product Management, and Delivery teams to continuously enhance Managed Security Services.<br> Our Culture &amp; Code of Conduct: At ZainTECH, we take pride in a culture built on collaboration, innovation, and uncompromising integrity.<br> We are looking for individuals who share these values and are committed to customer-centricity and ethical excellence.<br> All employees are expected to uphold our Code of Conduct, which serves as a guiding framework for responsible behavior across everything we do — from how we work with each other to how we engage with clients and partners globally.<br> 3-5 years of hands-on experience designing, implementing, and administering SIEM platforms within enterprise or Managed Security Services environments.<br> Strong experience with one or more SIEM platforms such as Microsoft Sentinel, Splunk Enterprise Security, IBM QRadar, ArcSight, LogRhythm, or Elastic Security.<br> Experience integrating multiple security technologies, including EDR, firewalls, IDS/IPS, cloud security platforms, identity platforms, and threat intelligence feeds.<br> Working knowledge of Windows, Linux, networking, scripting, APIs, and automation technologies.<br> Experience implementing SOAR platforms and security automation workflows.<br> Knowledge of MITRE ATT&amp;CK, threat intelligence integration, and detection engineering principles.<br> Experience supporting enterprise cloud environments including Microsoft Azure, AWS, or Google Cloud Platform.<br> Experience working within a Managed Security Services Provider (MSSP) environment.<br> Bachelor’s degree in Cybersecurity, Information Security, Computer Science, Information Technology, Engineering, or a related field.<br> Security +, CEH or any relevant certification preferred</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Frontier coding agents are already good at passing tests.<br> We measure whether they pass them the right way .<br>We're building a dataset to evaluate the safety and conduct of AI coding agents — not just whether they complete a task, but whether they do it honestly, within scope, and without cutting corners.<br>You'll design tasks where the easy path is the unsafe one, and write the tests that catch it: Build realistic developer environments — a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks that pair a benign development goal with a tempting unsafe shortcut: scope creep, policy violations, data corruption, over-permissive changes Write tests that verify whether the agent completed the task the right way — catching corners cut, not just checking outputs Iterate on tasks and tests based on QA feedback — review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling; Not prompt engineering; Not cybersecurity or red-teaming — there is no attacker in the scenario.<br> Cybersecurity experience is a nice-to-have but not a requirement.<br> We're looking for engineers who understand how code should behave, not penetration testers.<br> Strong software engineers, not security specialists; Not writing code from scratch — the agent writes most of the code; you design the situation and evaluate the outcome; What we look for 4–5+ years in software development; Core stack: Python, JavaScript/TypeScript; Strong test design skills — functional and integration tests that separate safe from unsafe completion, not just correct from incorrect; Hands-on experience with coding agents (Claude Code, GitHub Copilot CLI, Codex, or similar); Familiarity with GitHub PRs and CI workflows as a user; Stack breadth is welcome, not a filter.<br> Tasks simulate real repositories with databases, CI pipelines, and deploy scripts, so wider backend and infrastructure exposure is genuinely useful — but you don't need to be an expert in every layer; English proficiency — B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> The real difficulty is building the temptation — a scenario where the unsafe or out-of-scope path is the path of least resistance — and then writing tests that reliably catch an agent that took it.<br> Tasks have many valid solutions; tests must accept all of them and reject the bad ones.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Project time expectations For this project, tasks are estimated to require around 20-25 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation On this project, contributors can earn up to $75 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>