وظائف فني دوكو

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>USAF equivalent position is Avionics Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li> <li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li> <li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from production staff, avionic leads, avionics/com technician IIIs, or avionics technician IIs.</li> <li>Uses common and complex test instruments in the performance of assigned duties.</li> <li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li> <li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li> <li>Must be able to work with limited supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft avionics and/or GCS maintenance experience required.</li> <li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li> <li>Must have basic knowledge of RFF systems, components, and accessories.</li> <li>Must possess general understanding of technical publications related to aircraft electronics maintenance.</li> <li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li> <li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li> <li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Current IAT Level II certification.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 experience as an avionics technician.</li> <li>Avionics technician experience within the last 10 years.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Job Overview&nbsp;</strong></span></span></p><br><p><span><span>The <strong>R&amp;M Technician III – Liner Hanger</strong> is responsible for the inspection, maintenance, repair, testing, and refurbishment of Liner Hanger systems and associated downhole tools. The role ensures all equipment is serviced, assembled, and certified in accordance with OEM specifications, company procedures, and customer requirements. This position supports workshop and field operations while maintaining the highest standards of safety, quality, and operational excellence. Senior technicians may provide technical expertise, troubleshoot complex tool failures, and support operational efficiency initiatives.</span></span></p><br><p><span><span><strong>Responsibilities:</strong></span></span></p><br><ul><li><p><span><span>Inspect, repair, maintain, and pressure test Liner Hanger systems and related equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Disassemble, clean, assemble, and refurbish Liner Hanger tools according to OEM procedures.&nbsp;</span></span></p><br></li><li><p><span><span>Diagnose equipment failures and perform troubleshooting and corrective maintenance.&nbsp;</span></span></p><br></li><li><p><span><span>Conduct dimensional inspections, function testing, and quality checks to ensure equipment readiness.&nbsp;</span></span></p><br></li><li><p><span><span>Complete maintenance records, work orders, and inspection documentation accurately.&nbsp;</span></span></p><br></li><li><p><span><span>Ensure compliance with HSE, quality, and operational standards.&nbsp;</span></span></p><br></li><li><p><span><span>Safely operate workshop machinery, lifting equipment, and testing equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Provide technical support and guidance to junior technicians when required.</span></span></p><br></li></ul><p><span><span><strong>Skills:</strong></span></span></p><br><ul><li><p><span><span>Liner Hanger equipment maintenance and repair&nbsp;</span></span></p><br></li><li><p><span><span>Mechanical troubleshooting and failure analysis&nbsp;</span></span></p><br></li><li><p><span><span>Pressure testing and function testing&nbsp;</span></span></p><br></li><li><p><span><span>Assembly and disassembly of downhole tools&nbsp;</span></span></p><br></li><li><p><span><span>Precision measuring and quality inspection&nbsp;</span></span></p><br></li><li><p><span><span>Reading technical drawings and maintenance procedures&nbsp;</span></span></p><br></li><li><p><span><span>Root cause analysis and problem-solving&nbsp;</span></span></p><br></li><li><p><span><span>Strong safety awareness and teamwork</span></span></p><br></li></ul><p><span><span><strong>Qualifications:</strong></span></span></p><br><ul><li><p><span><span>High School Diploma or Technical/Vocational Certificate in Mechanical or related discipline.&nbsp;</span></span></p><br></li><li><p><span><span>4–6 years of experience in Liner Hanger equipment repair and maintenance within the Oil &amp; Gas industry.&nbsp;</span></span></p><br></li><li><p><span><span>Hands-on experience with hydraulic and mechanical Liner Hanger systems, running tools, packers, and related downhole equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Knowledge of pressure testing, dimensional inspection, and equipment certification processes.&nbsp;</span></span></p><br></li><li><p><span><span>Forklift, crane, or lifting equipment certification preferred.&nbsp;</span></span></p><br></li><li><p><span><span>Ability to work in a workshop and field support environment.&nbsp;</span></span></p><br></li><li><p><span><span>Willingness to travel up to 10% as required.</span></span></p><br></li></ul><p><span><span>#LI-MD1</span></span></p><br><br> <p><span>Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation.&nbsp;&nbsp;</span></p><br> <p><span>We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition.&nbsp;&nbsp;</span></p><br> <p><span>Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team.&nbsp;&nbsp;</span></p><br> <p><span>When you join Weatherford, you instantly feel connected to something bigger – a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other’s successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford.&nbsp;</span></p><br> <p><b><span>Join Us:&nbsp;</span></b></p><br> <p><span>Weatherford is producing energy for today and tomorrow- with global opportunities as unlimited as your sense of adventure. Join us to make an impact on our customers, the industry, and the world.&nbsp;&nbsp;</span></p><br> <p><span>Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.</span></p><br> <br> <br> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Supply Technician II assists with documents pertaining to work orders completed within the MST (Maintenance Support Team) and is responsible for the OMDAC-SWACA calibration program. Provides weekly/monthly maintenance work order reports within the section and performs technical supply management tasks (e.g., inventory management, storage management, maintenance tagging of equipment). Has knowledge of supply operations and program requirements and the ability to apply established supply policies, day-to-day servicing techniques, regulations, and procedures. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Ability to obtain a National Agency Check with Inquires (NACI) to obtain a Common Access Card (CAC).</li><li>Ability to obtain and maintain a Secret level security clearance is preferred.</li><li>One-year related experience may be substituted for one year of education, if degree is required.</li><li>High School diploma or GED required.</li><li>Some college preferred.</li><li>IASSC: Lean Six Sigma: Green Belt preferred</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience.</li><li>A minimum of five years experience in Supply operations.</li><li>Experience with automated supply management systems.</li><li>Must be able to obtain a forklift license.</li><li>Experience with a customer service-oriented company.</li><li>At least two years of supervisory or lead experience is preferred.</li></ul><p></p></section>

<p><h4>Job description</h4> <p>The aircraft mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM medical for deployment.</p> <h4>Knowledge & skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements / working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Job Details / Position Summary The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness. Description: • Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform.• Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data• Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.• Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals.• Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications.• Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins.• Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. • Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance.• Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system.• Performs close tolerance adjustment, repair and rework of equipment in and out of shop area.• Services, inspects and tests aviation support equipment used for direct and indirect aircraft support.• Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type.• Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE).• Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment.• Conducts off station maintenance when required.• When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: • High School Diploma • Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: + “I” Level &amp; “O” Level Tire &amp; Wheel certification + Hydraulic Contamination certification + Collateral Duty Inspector (CDI) qualification + Corrosion Prevention and Control and Aircraft Paint qualification + “I” Level Battery Maintenance certification Experience: • Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. • Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. • Must be United States (U.S.) citizen , be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Have a strong knowledge base of intermediate level maintenance business practices and procedures • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” level, “I” level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance. • Must have an in-depth knowledge of applicable technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program. • Must be willing and able to work with hazardous materials and conduct specialty on-the-job training. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><h4>About Jumeirah</h4> <p>Jumeirah, a global leader in luxury hospitality and a member of Dubai Holding, operates an exceptional portfolio of 29 properties across 11 countries in the Middle East, Europe, and Asia. In 1999, Jumeirah changed the face of luxury hospitality with the opening of the iconic Jumeirah Burj Al Arab and the brand is now renowned worldwide for its distinguished beachfront resorts, esteemed city hotels and exclusive residences. From the contemporary Maldivian island paradise at Jumeirah Olhahali Island to the art-inspired Jumeirah Capri Palace in Italy and the modern twist on a British classic at Jumeirah Carlton Tower in London, the brand has become synonymous with warm and generous service and the ability to craft distinctive and purposeful experiences that bring joy to guests from across the world.</p> <h4>About Jumeirah Messilah Beach</h4> <p>Jumeirah Messilah Beach is a beachfront resort in Kuwait, set in a secluded location with easy access to the city’s business district, airport and main attractions. The property offers a range of dining destinations, wellness experiences at Talise Spa, and dedicated facilities for meetings and events. Ideal for both business and leisure, it blends comfort, connectivity, and Arabian hospitality.</p> <h4>About the Job</h4> <p>An exciting opportunity has arisen for a Plumbing Technician to join the Engineering team at Jumeirah Messilah Beach.</p> <p>The main duties and responsibilities of this role include:</p> <ul> <li>Carry out preventive and corrective maintenance on all plumbing systems including water supply lines, drainage systems, pumps, water heaters, and sanitation fixtures.</li> <li>Inspect and repair leaks, clogs, and malfunctions in guest rooms, public areas, and service areas.</li> <li>Maintain proper and safe condition of all plant, plant rooms, equipment and work areas.</li> <li>Comply with JEMS and all fire, life, health, and safety standards.</li> <li>Install, replace, and maintain plumbing fixtures such as faucets, sinks, toilets, showers, and valves.</li> <li>Maintain and service water filtration, softening, and treatment systems.</li> <li>Maintain hot and cold-water systems, including calorifiers, boilers, circulation pumps, swimming pools, and fountains.</li> </ul> <h4>About You</h4> <p>The ideal candidate for this position will have the following experience and qualifications:</p> <ul> <li>Hold a diploma or certificate in plumbing / mechanical maintenance or related technical field.</li> <li>Demonstrate good oral and written communication is an advantage.</li> <li>Have at least a grade 10 level in education with a good moral background in educational attainment.</li> <li>Possess software competencies – Microsoft Office programs (intermediate).</li> <li>Have 1+ years of experience in the technical department.</li> </ul> <h4>About the Benefits</h4> <p>Besides generous F&B benefits and reduced hotel rates across our hotels globally, this role has excellent employee benefits making the role attractive to high performers and any applicant who likes to associate himself or herself with one of the most luxurious brands in the hospitality industry.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Why Carrier?</b></p><br><p>Carrier is the leading worldwide provider of heating, ventilation, and air conditioning (HVAC), refrigeration, fire, security, and cold chain solutions. We invented modern air conditioning, and our team of pioneers continues to advance technologies that transform how we live, work, and move.</p><br><p>We offer industry-leading services and sustainable solutions designed to create healthier homes, buildings, and environments while reducing environmental impact. At Carrier, diversity and inclusion are the drivers of innovation and growth — and our exceptional people put the customer at the center of everything we do.</p><br><p><b>Job Overview: </b></p><br><p>We are looking for a skilled and motivated HVAC Service Technician to join our team. The ideal candidate will have hands-on experience in HVAC maintenance, troubleshooting, and repair, with knowledge of commercial and industrial HVAC systems.</p><br><p><b>Job Responsibilities</b></p><br><ul><li>Perform HVAC maintenance, troubleshooting, repair, and servicing activities.</li><li>Diagnose and resolve issues with various HVAC equipment and systems.</li><li>Carry out preventive maintenance as per schedules and company procedures.</li><li>Service and maintain chillers, AHUs, FCUs, VRF/VRV systems, package units, and HVAC control systems.</li><li>Read and interpret electrical schematics, technical drawings, and service manuals.</li><li>Prepare service reports and maintenance documentation.</li><li>Communicate professionally with customers regarding service work and technical findings.</li><li>Follow safety regulations and ensure safe working practices at all times.</li></ul><p><b>Required Qualifications &amp; Skills</b></p><br><ul><li>ITI/Diploma in Refrigeration &amp; Air Conditioning or equivalent qualification.</li><li>Minimum High School (12th Grade) completion.</li><li><b>5–10 years of experience</b> in HVAC maintenance and troubleshooting, preferably in commercial and industrial applications.</li><li>Good knowledge of:<ul><li>Water-cooled and air-cooled chillers</li><li>Air Handling Units (AHUs)</li><li>Fan Coil Units (FCUs)</li><li>VRF/VRV systems</li><li>Package units</li><li>HVAC control systems</li></ul></li><li>Ability to read electrical schematics and technical drawings.</li><li>Strong troubleshooting, diagnostic, and problem-solving skills.</li><li>Knowledge of safety regulations and preventive maintenance procedures.</li><li>Ability to prepare service reports and communicate effectively with customers.</li><li>Must possess a valid <b>Kuwait Driving License</b>.</li></ul><p><b>Our Commitment to You</b></p><br><p>At Carrier, our greatest assets are the expertise, creativity, and passion of our employees. We strive to provide a workplace that attracts, develops, and retains the best talent, fosters collaboration, and drives innovation to serve our customers better.</p><br><p>We are guided by our values of <b>Respect, Integrity, Inclusion, Innovation, and Excellence</b>, and we are excited for you to join us and make a difference.</p><br><p><b>Apply Now!</b></p><br><p><span><b><b>Carrier is An Equal <span><span><span><span><span><span><span><span><span><span><span><span><span><span><span>Opportunity/Affirmative</span></span></span></span></span></span></span></span></span></span></span></span></span></span></span> Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.</b></b></span></p><br><p><b>Job Applicant's Privacy Notice:</b></p><br><p><span>Click on this </span>link<span> to read the Job Applicant's Privacy Notice</span></p><br> </div>

<p><h4>Job Description</h4> <p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and be responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <p>This role requires the candidate to obtain Disclosure and Barring Service (DBS) check through UK Government prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM Medical for deployment.</p> <h4>Knowledge & Skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</p> <p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p> <p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</p> <p>Working knowledge of technical publications and logistics information systems.</p> <p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</p> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical Requirements / Working Environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</p> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> <p>Will handle dirty parts and lubricants.</p> <p>Will be required to wear proper personal protective equipment (PPE).</p> <p>Must be able to pass a respirator physical and fit test qualification.</p> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> <p>May work in maintenance shop or outside.</p> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> <p>May be exposed to extreme noise from operating equipment.</p> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The defense group at Leidos is seeking a Non-Intrusive Inspection System (NIIS) Field Service Technician, Journeyman in support of the IBD-SS program's CENTCOM and Horn of Africa areas of operations. UNLEASH YOUR POTENTIAL At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business Are you ready for your next career challenge? The Field Service Technician will perform maintenance, training, and work closely with military customers. This position desires an individual who has experience performing mechanical and electronics, on both the radiation and Backscatter technology systems as well as skills performing installs, de-installs, testing systems and components, and performing Preventive Maintenance actions on a variety of systems belonging to the Non-Intrusive Inspection Systems. The successful candidate may be assigned supervisor duties to manage the day-to-day operations of their area or operations and or other technicians. OCONUS travel will be required to other OCONUS locations. THE MISSION The Defense Group provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Our team is solving the world's toughest security challenges for customers with "can't fail" missions.&nbsp;</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>WHAT SETS YOU APART:</p><ul><li>Must be capable of performing analyses of system operations</li><li>Must have knowledge of and experience in the operations of hardware systems and components</li><li>Must have experience in fault detection, isolation, and correction of hardware systems and individual components</li><li>Must be capable of routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards</li><li>Performs sustainment and PMCS maintenance on the system and vehicle chassis</li><li>Performs site surveys to determine type and placement of systems</li><li>Installs and de-installs systems and their components and trains operators and end users</li><li>Updates databases, informs Lead of job status and any issues encountered</li><li>Tracks and updates work orders to include the replacement of parts component serial numbers removed and replaced</li><li>May travels via military/commercial conveyances to outlying areas</li><li>Skilled using hand tools, power tools, and electronics measuring and test equipment</li><li>Ability to perform minor maintenance on vehicles and generators such as changing oil and filter</li><li>Must have the ability to generate/produce data and reports</li><li>Interact and professionally exhibit customer service skills and be able to present a positive approach with customers and peers</li><li>Must be able to withstand physical demands of seasonal hot or cold temperatures and willing to live and operate in an austere environment</li><li>Must be willing to support up to an 84-hour Extended Work Week</li><li>Possesses a US passport that will not expire for at least 2 or more years and must have at least 4 consecutive blank pages for country visas</li><li>Must be capable of meeting standards of fitness for deployment to the SWA of Operations</li><li>Must be able to lift 50 lbs., climb ladders, and be able to work in a non-climate-controlled environment</li><li>Other duties as assigned</li><li>WHAT SETS YOU APART : BA/BS plus 5-8 + years relevant experience (12 years' experience in lieu of a degree)</li><li>Radiation Safety Certification Required</li><li>Security Clearance: US Secret security clearance required</li><li>YOU MIGHT ALSO HAVE</li><li>Relevant and recent experience supporting Force Protection systems is highly desirable</li><li>Experience with Radiation and Backscatter systems</li><li>Experience with other PM FPS Systems to include BETSS-C, Cerberus, Scout, IBD-K, and RDISS</li><li>Ability to train operators in the use and maintenance of NIIS systems</li><li>Experience utilizing COLTS and operating within the GCSS-A environment</li><li>Proficient in Microsoft Office, PowerPoint, and Excel</li><li>Import/Export (ITAR/EXIM) compliance experience</li><li>Experience in a rapid paced, time sensitive, high-quality environment</li><li>Strong written and verbal communication skills along with strong customer service</li><li>Ability to multi-task, prioritize commitments, and manage time effectively</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As a QC Technician in the heavy industry and metallurgy sector, you will play a crucial role in ensuring the highest quality standards in our production processes. This position is ideal for individuals who are detail-oriented and passionate about quality control, as you will be responsible for conducting inspections and tests on various materials and products. Your expertise will directly contribute to maintaining our reputation for excellence and reliability in the industry.</p><p>Joining our team means becoming part of a collaborative environment where your input is valued, and your professional growth is prioritized. We believe in investing in our employees through continuous training and development opportunities. As a QC Technician, you will have access to the latest technologies and methodologies in quality assurance, allowing you to enhance your skills and advance your career within the organization. Your contributions will not only help you grow but will also support the overall success of the company.</p><p>We are committed to fostering a culture of innovation and teamwork. You will work closely with cross-functional teams to address quality issues and implement solutions that drive efficiency and productivity. This role is not just about maintaining standards; it’s about being a proactive part of a dynamic team that is always looking to improve processes and outcomes. If you are ready to take your career to the next level and make a significant impact in the heavy industry, we invite you to apply for this exciting opportunity.</p><p><b>Responsibilities:</b></p><ol><li>Conduct thorough inspections of raw materials and finished products using precision measuring instruments to ensure compliance with industry standards and specifications.</li><li>Develop and implement quality control procedures and protocols to enhance product reliability and safety, contributing to overall operational efficiency.</li><li>Document and analyze inspection results, preparing detailed reports to identify trends and areas for improvement in the production process.</li><li>Collaborate with production teams to resolve quality-related issues, providing guidance on best practices and corrective actions to maintain high standards.</li><li>Participate in internal audits and quality assurance programs, ensuring adherence to company policies and regulatory requirements.</li><li>Utilize statistical process control techniques to monitor production processes, identifying deviations and implementing corrective measures promptly.</li><li>Train and mentor junior staff on quality control practices and procedures, fostering a culture of quality awareness and continuous improvement.</li><li>Assist in the development of quality improvement initiatives, leveraging feedback from customers and stakeholders to enhance product offerings.</li><li>Stay updated on industry trends and advancements in quality control technologies, integrating innovative solutions into existing processes to improve efficiency.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong attention to detail to identify defects and ensure product quality.</li><li>Proficiency in using measurement tools and techniques for accurate inspections.</li><li>Knowledge of quality control standards and regulatory requirements in the heavy industry.</li><li>Excellent analytical skills to interpret data and make informed decisions.</li><li>Effective communication skills for collaborating with cross-functional teams.</li><li>Ability to develop and implement quality control procedures and protocols.</li><li>Familiarity with statistical process control methods for monitoring production efficiency.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication</b>:</p><ul><li> The ability to communicate effectively verbally and in writing with employees and workers at all levels.</li><li> Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Professional Skills and Abilities</b>:</p><ul><li> Good knowledge of fire protection systems, fire prevention procedures, and first aid.</li><li> Practical knowledge of local occupational safety, environmental, and building safety requirements.</li><li> Basic knowledge of applicable environmental and labor laws and regulations.</li><li> Working knowledge of occupational health and safety standards, particularly <b>ISO 45001</b>.</li><li> Good understanding of quality, health, safety, and food industry requirements.</li><li> Good problem-solving and observation skills.</li><li> Ability to work accurately and take responsibility for assigned tasks.</li><li> Ability to work effectively under pressure.</li><li> Professional, objective, and ethical approach.</li><li> Good teamwork and communication skills.</li><li> Strong attention to safety details and potential hazards.</li><li> Ability to maintain company property and confidentiality.</li></ul><p>Technical Skills</p><ul><li> Good computer skills and ability to use electronic systems and standard office applications.</li><li> Ability to maintain safety records and documentation electronically.</li></ul><p>Language Requirements</p><ul><li><b>Arabic:</b> Fluent.</li><li><b>English:</b> Good proficiency is preferred.</li></ul><p>Qualifications &amp; Experience</p><p><b>Educational Qualifications:</b></p><ul><li> Diploma in <b>Occupational Health and Safety, Occupational Safety, or Public Health</b>, along with specialized training in <b>ISO 45001</b>.</li><li> High School Diploma with specialized training and certifications in <b>Occupational Health and Safety and ISO 45001</b>.</li><li> Certifications such as <b>IRCA Certified Lead Auditor, HACCP, and OSHA</b> are preferred.</li></ul><p><b>Experience:</b></p><ul><li><b>Fresh graduates</b> may be considered.</li><li><b>3-5 years of experience</b> in Safety Management, Occupational Health &amp; Safety, or a related field.</li><li> At least <b>2 years of experience in the food manufacturing industry or government entities</b> is preferred.</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for assisting the Safety Technician and Safety Shift Supervisor in implementing occupational health, safety, environmental, and industrial safety procedures. The role supports safety inspections, risk identification, emergency preparedness, fire protection systems, employee awareness, and safety documentation to help ensure a safe and compliant workplace.</p><p>Key Responsibilities</p><ul><li>Assist with monitoring occupational health, safety, and industrial safety conditions across company work areas.</li><li>Assist in assembling, installing, adjusting, servicing, and checking the readiness of safety equipment and systems.</li><li>Prepare inspection requirements, including measuring instruments, records, and personal protective equipment (PPE), and ensure they are ready for use.</li><li>Assist in preparing the required materials and equipment for investigations of workplace accidents and injuries.</li><li>Implement approved safety and occupational hazard prevention procedures at work sites.</li><li>Assist in monitoring employee compliance with company safety policies, procedures, laws, and industrial safety standards.</li><li>Conduct daily inspections of work areas, identify hazardous conditions, isolate dangerous areas, and support corrective actions where possible.</li><li>Follow the instructions of the Safety Technician, Safety Shift Supervisor, and Safety Officer.</li><li>Support the Safety Technician in delivering safety orientation and training to new employees.</li><li>Ensure employees properly wear and use the required personal protective equipment (PPE).</li><li>Participate in the implementation of occupational health, safety, and industrial safety plans and procedures.</li><li>Participate in periodic inspections of facilities and equipment to ensure they are safe and compliant.</li><li>Participate in investigations of workplace accidents, incidents, and injuries.</li><li>Maintain and update occupational health, safety, and industrial safety records.</li><li>Support the integration of health, safety, and environmental (HSE) practices into daily operations.</li><li>Follow applicable <b>ISO 45001 and ISO 14001</b> standards and practices.</li><li>Support company safety objectives and contribute to meeting applicable international safety requirements.</li><li>Participate in risk identification, analysis, and assessment for operational processes and employee job functions.</li><li>Conduct routine testing of fire alarm and fire protection systems and verify their operational effectiveness.</li><li>Support the implementation of emergency response and evacuation plans.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Good knowledge of fire protection systems, fire prevention procedures, and first aid.</li><li>Practical knowledge of local occupational safety, environmental, and building safety requirements.</li><li>Basic knowledge of applicable environmental and labor laws and regulations.</li><li>Working knowledge of occupational health and safety standards, particularly <b>ISO 45001</b>.</li><li>Good understanding of quality, health, safety, and food industry requirements.</li><li>Good problem-solving and observation skills.</li><li>Ability to work accurately and take responsibility for assigned tasks.</li><li>Ability to work effectively under pressure.</li><li>Professional, objective, and ethical approach.</li><li>Good teamwork and communication skills.</li><li>Strong attention to safety details and potential hazards.</li><li>Ability to maintain company property and confidentiality.</li></ul><p>Technical Skills</p><ul><li>Good computer skills and ability to use electronic systems and standard office applications.</li><li>Ability to maintain safety records and documentation electronically.</li></ul><p>Language Requirements</p><ul><li><b>Arabic:</b> Fluent.</li><li><b>English:</b> Good proficiency is preferred.</li></ul><p>Qualifications &amp; Experience</p><p><b>Educational Qualifications:</b></p><ul><li>Diploma in <b>Occupational Health and Safety, Occupational Safety, or Public Health</b>, along with specialized training in <b>ISO 45001</b>.</li><li>High School Diploma with specialized training and certifications in <b>Occupational Health and Safety and ISO 45001</b>.</li><li>Certifications such as <b>IRCA Certified Lead Auditor, HACCP, and OSHA</b> are preferred.</li></ul><p><b>Experience:</b></p><ul><li><b>Fresh graduates</b> may be considered.</li><li><b>3-5 years of experience</b> in Safety Management, Occupational Health &amp; Safety, or a related field.</li><li>At least <b>2 years of experience in the food manufacturing industry or government entities</b> is preferred.</li></ul><p><br></p><p><br></p></div>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years .</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.USAF equivalent position is Avionics Technician Apprentice.Essential Responsibilities:Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities. Requires a basic understanding of the interrelationships of circuits and associated systems. Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs. Uses common and complex test instruments in the performance of assigned duties. Maintains, repairs, and installs various types of electronic equipment and related devices. Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations. Must be able to work with limited supervision. Performs all other duties as assigned as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Avionics and/or GCS maintenance experience required.</li><li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li><li>Must have basic knowledge of RFF systems, components, and accessories.</li><li>Must possess general understanding of technical publications related to Aircraft electronics maintenance.</li><li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li><li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li><li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months.</li><li>Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster.</li><li>Accommodations may be available under limited circumstances.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Master HVAC Technician - TS/SCI Job Category: Engineering and Technical Support Time Type: Full time Minimum Clearance Required to Start: TS/SCI Employee Type: Regular-Long Term Assignment Percentage of Travel Required: Up to 10% Type of Travel: Outside Continental US * * * The Opportunity: CACI is seeking a Master HVAC Technician to support our program in support to our mission critical client in Kuwait. As the selected candidate, you will perform inspections on HVAC systems and components (e.g. heating units, building exhaust fans, ventilation units, etc.) to evaluate condition, identify necessary repairs and recommend or perform preventive maintenance. Cleans, lubricates, and repacks the working parts of the system. Responsibilities: Tracks performance of routine and preventative maintenance to ensure availability of HVAC systems and troubleshoot HVAC/R systems with complex problems and extensive repairs requiring judgement to locate malfunctions. Respond to service calls and preventive maintenance inspections and produce reports in writing through computerized maintenance management system (CMMS) regarding malfunctioning/inoperable equipment. Responds to emergency situations during and after hours to resolve issues. Diagnoses causes of problems and/or failures in HVAC systems for the purpose of identifying equipment and/or systems repair and/or replacement needs. Install, repair, and maintain large commercial and industrial ventilation, refrigeration, air conditioning (AC), and cooling systems with complex problems and extensive repairs. Independently perform recurring work on exhaust fans, boilers, air handlers, pump, motors, air dryers, and other related HVAC equipment but not limited to HVAC control and monitoring systems. Installs, modifies, overhauls, repairs, and maintains a variety of complex HVAC equipment air conditioning, air handlers, pumps, motors, valves, heating systems, and associated auxiliary and control equipment. Works with engineering or scientific personnel to discuss plans, modifications, and user needs. Reviews available plans, specifications, or drawings; determines the size, shape, and location of equipment. Performs design, modification, maintenance and repair of critical environmental and energy support systems and associated highly sensitive state-of-the-art computerized controls and air quality monitoring systems located within US-Only areas of Intelligence and Security Command (INSCOM) Sensitive Compartmented Information Facilities (SCIFs). Provides critical advanced technical knowledge in support of unique security requirements inherent in Intelligence and Security Command (INSCOM) Sensitive Compartmented Information Facilities (SCIFs)operations including sound baffling techniques/equipment and the resolution of compromising electrical currents, as sustainment of high system availability rates. Produces classified technical documentation outlining in depth technical findings and recommendations. Provides design, emergency non-routine fault isolation of smoke removal systems, fire detection/suppression equipment used exclusively in critical, highly sensitive Military Forces installations. Performs system and subsystem diagnostics and scheduling and maintaining complex electronic environmental systems, calibration, and lubrication of unique components and controls that are used to provide and monitor precise environmental conditions within SCIFs housing unique military intelligence equipment, scientific devices, and technologies. Performs periodic, worldwide deployments in strategic and tactical mobile facility environments. Provides expert technical assistance for a 24-hour operational environment with limited documentation resources. Responds to off-duty (evening and weekend) calls to support critical system outages and to provide rapid fault isolation and resolution concerning environmental factors affecting ISR system performance to include developing technical documentation for ISR support system layouts. Supports US Army systems on site whenever and wherever deployed. Available to deploy to other countries and/or theaters to perform quick reaction technical support to US forces worldwide military contingency missions and requirements in potentially hazardous work environments. What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you ll be part of a high-performing group dedicated to our customer s missions and driven by a higher purpose to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground in your career and in our legacy. Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. The proposed salary range for this position is: $51,800-$106,200 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree and three years of experience College, Vocational School, or High School diploma or equivalent and a combination of 10 years education and experience with a valid Master HVAC license, or equivalent, at a State level; or 12 years experience in an equivalent Military HVAC training/certification. Specific experience in fault isolation and resolution of tactical and strategic environmental systems and their sophisticated electronic support systems. Ability to plan, install, troubleshoot and repair equipment and systems not fully covered by technical manuals, schematics, etc. 4 years experience with HVAC control and monitoring systems and their components. Experience with computerized maintenance management systems (CMMS). Expert level experience in design, installation and sustainment of computer controlled environmental systems in mobile secure facilities. Required to meet US Government accepted and industry standards criteria for technically complex computer environmental systems, uninterrupted power distribution systems, and power control equipment. Possess a North American Technician Excellence (NATE) certification. Able to maneuver in small spaces and lift up to 50lbs. US Citizen. Active TS/SCI clearance REQUIRED.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Red Switch Technician II will supervisor Red Switch Technician I personnel and operate and maintain (O&amp;M) the Defense Red Switch Network (DRSN) facility in accordance with Defense Information Systems Agency (DISA) regulations and guidelines. Responsible for organizing and implementing system and facility upgrades with Raytheon, DISA, and local agencies. Prepare and maintain DRSN facility in accordance with various agency checklist requirements such as Quality Control (QC), DRSN Security, DISA Performance Evaluation (PE), Communications Security (COMSEC), etc. Train DRSN technicians and military deployment teams on operation, maintenance, and troubleshooting of equipment. Brief various levels of management within the civilian and military sector on DRSN operations and requirements. Responsible for ensuring subscribers are trained on the features and capabilities of their phone instruments and are operating their DRSN phones within the prescribed security requirements. Responsible for providing DRSN Operations and Maintenance (O&amp;M) support. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + O&amp;M of the Digital Small Switch (DSS-2A). Monitor trunk and circuit outages as well as the administrative terminal and Enhanced Command Console (ECC). + Perform direct trunk dialing checks on trunk channels associated with the switch to ensure satisfactory operation of voice circuits (at least once each shift and following any trunk failure). + Perform Preventive Maintenance Inspections (PMIs) on the switch and peripheral equipment. + Create and update databases in the administrative terminal using information received from users, Raytheon, and DISA. + Perform database backups to CD-R discs. + Perform database downloads to update switch configurations. + Update and print out telephone console information and line strips for users. + Fabricate custom interface cables using hand tools and wiring diagrams. + Escort individuals requiring access to the Red Switch in the performance of their duties. + Ensure that all outages are reported in a timely manner to the DISA GNOSC, NOC-K, TCF, V2X management for tracking in Army Enterprise Service Management Platform (AESMP) ticketing system. + Provide hourly status updates to designated agencies in regard to outages, etc. + Annotate all activities in the Master Station Log (MSL) database. + Prepare call detail history reports for DISA and military personnel as directed. + Contribute to weekly reports with regard to your additional duties and other assigned tasks. + Complete individual timesheets on a daily basis. + Check the Regional Cyber Center (RCC) website for accuracy with regard to authorized service interruptions (ASIs) and outages. + Initiate Quality Control checklists as they pertain to your additional duties. + Update training records as needed. + Update memorandums and technical drawings (including block diagrams and schematics) as directed. Inventory Communications Security (COMSEC) equipment and document DA Form 2653-R (each shift). + Work with military technical monitor(s), Special Security Office (SSO) and other Department of Defense contractors and civilians including local hires in support of the DRSN mission. + Interface with technicians from Outside Plant, DPW, etc. regarding installations in support of the DRSN mission. + Coordinate with the Raytheon Help Desk for troubleshooting problems that cannot be resolved locally. + Contact the Return Merchandise Authorization (RMA) Help Desk in order to obtain a RMA for processing depot equipment repairs. + Performs other duties and assignments as required. Qualifications + Qualifications: + Security Clearance: + Active Top Secret SSBI within the past two years. + Individual must be eligible for Sensitive Compartmentalized Information (SCI) Access. + Education / Certifications: One year of related experience may be substituted for one year of education, if a degree is required. + High School Diploma required. + Bachelor’s Degree in IT or related field preferred. + Cardiopulmonary Resuscitation (CPR) (Training provided by contract) + This position requires candidates to adhere to DISA requirement. All candidates are required to maintain at least one (1) baseline certification. + The authorized certification for this job title are listed as follows: + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + Seven years’ experience in Communications-Electronics Maintenance functions: + installation, troubleshooting and repair of electronic communications equipment. + Use of phone + Digital sender, and desktop computer in a fast-paced office environment is desirable. + A working knowledge of Microsoft Office software is required. Must be able to work rotating shift schedules which provide 24-hour day/7-day week coverage. + Military or civilian technical training course of six (6) months or more is required. + This should be followed by a minimum of 24 months of on-the-job training (OJT). + A certificate of completion will suffice until verification of the training on your DD-214 can be completed. + Experience with a customer service-oriented company. + SUPERVISORY / BUDGETARY RESPONSIBILITIES + At least two years of supervisory or lead experience is preferred. + Update proprietary applications regarding: + Update section employee daily status, leave, sick, on site, etc. + Verify and track accomplishment of section monthly or quarterly safety and compliance training + Purge section employee expired certifications + Verify section employee compliance training in Virtual Training Record + Verify section vehicle logs are being kept accurately and uploaded + Ensure section personnel are maintaining their 8570 / 8140 certifications + Review weekly training compliance reports for accomplishment prior to suspense. + Review and approve leave forms ensuring before approval all compliance training is current. + Coordinate transportation and integration of new and returning employees. + Document and promptly counsel poor performance and policy violations. + Enforce all V2X, GO 1, and dress code policies. + Provide annual employee appraisal feedback in a professional and constructive manner. + Demonstrate V2X values Integrity, Respect, Responsibility, and Professionalism. + Ensure the safety of personnel and monthly safety inspections are properly conducted. + Communicate effectively up and down the chain of command. + Manage work schedules. + Conduct proper new and returning employee orientation and ensure employee thorough understanding and can accomplish all tasks in the Employee Job Certification (EJC) + Work with employees and HR when emergencies or abnormal circumstances occur. + To the best of your ability render all decisions based upon our company values and principles of Integrity, Respect, Responsibility, and Professionalism. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Four Seasons:</b></p><br><br><p>Four Seasons is powered by our people. We are a collective of individuals who crave to become better, to push ourselves to new heights and to treat each other as we wish to be treated in return. Our team members around the world create amazing experiences for our guests, residents, and partners through a commitment to luxury with genuine heart. We know that the best way to enable our people to deliver these exceptional guest experiences is through a world-class employee experience and company culture.<br>At Four Seasons, we believe in recognizing a familiar face, welcoming a new one and treating everyone we meet the way we would want to be treated ourselves. Whether you work with us, stay with us, live with us or discover with us, we believe our purpose is to create impressions that will stay with you for a lifetime. It comes from our belief that life is richer when we truly connect to the people and the world around us.</p><br><br><br><br><p><b>About the location:</b></p><br><br>A resort-like sanctuary in Kuwait’s heart. Discover a modern urban sanctuary in the heart of Kuwait City: a contemporary curation of Middle Eastern architecture, dazzling art and resort-like spaciousness, where striking sculptures seamlessly merge with traditional design. In this enclave of wonder – the first and only hotel in Kuwait to receive the prestigious Forbes Five-Star rating – you’ll find soaring rooftop restaurants, leisure facilities and the city’s largest guest rooms. Catch up with friends in the chic surrounds of Al Soor (known as La Chocolaterie of Kuwait), relax in air-conditioned cabanas by the infinity pool, ascend to a buzzing rooftop and wander the lush adjacent parkland. And with the city’s malls and souks within a few minutes’ drive, you can experience all the spoils of the city without spoiling your precious relaxation time.<br><br><p><b>What You Will Do</b></p><br><br><ul><li><p>Install, inspect, maintain, and repair HVAC systems, including chillers, air-handling units, fan coil units, and exhaust systems.</p><br><br></li><li><p>Conduct regular preventive maintenance and respond promptly to repair requests.</p><br><br></li><li><p>Troubleshoot system malfunctions and ensure timely resolution to minimize downtime.</p><br><br></li><li><p>Monitor and adjust temperature control systems to maintain guest comfort.</p><br><br></li><li><p>Maintain accurate logs and records of maintenance and repair work.</p><br><br></li><li><p>Ensure all work complies with Four Seasons safety, hygiene, and quality standards.</p><br><br></li></ul><br><p><b>What You Bring</b></p><br><br><ul><li><p>Minimum 2 years of experience as an HVAC Technician, preferably in a luxury hotel or commercial facility.</p><br><br></li><li><p>Strong knowledge of HVAC systems, controls, and refrigeration principles.</p><br><br></li><li><p>Skilled in preventive maintenance and troubleshooting.</p><br><br></li><li><p>Team-oriented with excellent communication and problem-solving skills.</p><br><br></li><li><p>Flexibility to work on a rotating schedule, including weekends and public holidays.</p><br><br></li></ul><br><p><b>What We Offer</b></p><br><br><ul><li><p>Full board shared living accommodation in high-quality, well-resourced staff housing.</p><br><br></li><li><p>Complimentary stays at Four Seasons Hotels worldwide.</p><br><br></li><li><p>Paid annual home leave tickets.</p><br><br></li><li><p>Quality employee meals.</p><br><br></li><li><p>Complimentary transportation to and from work.</p><br><br></li><li><p>Regular social, cultural, and sporting events.</p><br><br></li><li><p>Comprehensive medical coverage.</p><br><br></li></ul><br><p><b>Work Authorization</b></p><br><br><p>The Hotel will apply for work authorization for the successful candidate.</p><br><br><br><p>We look forward to receiving your application and welcoming you to the Four Seasons family.</p><br><br><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>