وظائف فني كمبيوتر في الكويت

<p>Under general supervision, performs Artificial Lift (AL) installations and pulls, routine checks, and troubleshooting. Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs. Performs basic well production analysis and repair of AL equipment and tests, splices, and repairs cable. Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage. Trains and coaches new hires in basic principles. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Maintains mechanical performance of truck used in transportation to and from the field. Trains and mentors lower level technicians at the well site. Skills are typically acquired through completion of high school or similar education and 3 to 4 years of experience in artificial lift operations. Performs basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills : Workover or Completion<br>Experience : 3 + Years<br>Education : High School/Secondary</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description: Quality Control Supervisor </p><p><b>Position:</b>&nbsp;Quality Control Supervisor</p><p><b>Location:</b>&nbsp;Kuwait City, Kuwait</p><p><b>Working Hours:</b>&nbsp;12:30 PM – 9:30 PM</p><p>Job Summary</p><p>The Quality Control Supervisor is responsible for ensuring the quality, consistency, and efficiency of all operational activities during the shift. This role works closely with technicians and staff to maintain high service standards, ensure smooth coordination, and verify that all services are completed according to company procedures and customer expectations.</p><p>Key Responsibilities</p><ul><li>Supervise technicians and operational staff during the 12:30 PM – 9:30 PM shift.</li><li>Ensure effective teamwork, communication, and coordination between technicians and support staff.</li><li>Monitor service quality and compliance with company standards.</li><li>Conduct quality inspections on services, including:</li><li>Installation of protection systems</li><li>Other technical services performed by the team</li><li>Verify that all scheduled work is completed accurately and on time before the end of the shift.</li><li>Resolve operational issues and provide guidance to technicians when needed.</li><li>Ensure proper documentation of completed work and quality control checks.</li><li>Monitor adherence to safety procedures and company policies.</li><li>Prepare shift reports, highlighting completed work, quality findings, and any issues requiring follow-up.</li><li>Support continuous improvement initiatives to increase efficiency and customer satisfaction.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Here are professional skills you can include for a&nbsp;<b>Quality Control Supervisor</b>:</p><ul><li>Detail-oriented with a strong focus on quality and accuracy.</li><li>Strong leadership skills with the ability to lead and motivate a team.</li><li>Excellent team player with effective collaboration and communication skills.</li><li>Able to work efficiently under pressure and meet tight deadlines.</li><li>Strong problem-solving and decision-making abilities.</li><li>Excellent organizational and time management skills.</li><li>Ability to monitor, inspect, and maintain high-quality standards.</li><li>Effective coordination with technicians and staff to ensure smooth operations.</li><li>Strong attention to safety procedures and company policies.</li><li>Adaptable, reliable, and committed to continuous improvement.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The SIS Well Placement Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The SIS Well Placement Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Supervise and coordinate daily quick service operations (oil changes, tire services, inspections, minor repairs) </li><li>Monitor service progress to ensure fast and efficient job completion without compromising quality </li><li>Supervise and support service advisors and quick service staff </li><li>Ensure proper use and maintenance of tools, equipment, and service bays </li><li>Coordinate with parts department to maintain parts availability for quick service operations </li><li>Maintain productivity and turnaround time KPIs for quick service lanes </li><li>&nbsp;Handle escalated customer complaints and ensure rapid resolution </li><li>Maintain a clean, organized, and safe workshop environment </li><li>Recommend process improvements to improve speed, quality, and customer experience </li><li>Achieve departmental revenue targets while maintaining service quality, efficiency, and customer satisfaction.</li><li>Ensure service advisors are informed of the latest technical updates, maintenance standards, and specifications to support accurate service recommendations and quality delivery. </li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>High school diploma or equivalent; technical or vocational automotive training preferred &nbsp;&nbsp;&nbsp;&nbsp;</li><li>Valid Driving License </li><li>2–5 years of experience in automotive service</li><li>Strong knowledge of vehicle systems and repair processes </li></ul></div>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The SIS Well Placement Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The SIS Well Placement Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. </p><ul><li>Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process.</li><li>Assist as required with the development of technical job designs for PLs.</li><li>Assist with identifying areas where new and cost effective techniques can be applied.</li><li>Explore opportunities for value-added products and services.</li><li>Consult with Design/Technical Engineer role as required to optimize the technical design.</li><li>Assist in real-time incident response, recovery, and investigation as related to the area of expertise.</li><li>Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise.</li><li>Remain current on new technologies.</li><li>Maintain customer visibility through active participation in professional society activities and calls for papers.</li><li>Understand the competition's technical offering.</li><li>Participate in external technical societies and communities.</li><li>Contribute, write and review technical publications.</li><li>Engage with local universities, Customer institutes and research organizations.</li></ul><p>10+</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Production Stimulation Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Stimulation Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations. Offers technical guidance to engineers or technicians assigned to work on a common project. Mentors junior stimulation engineers within Well Services and DCS. Organizes client seminars, understands and catalogues client needs and implements solutions. Is regarded as a stimulation expert within the oilfield community and represents Schlumberger in various and multiple industry forum. Periodic publications in these forums are expected. May participate in recruiting.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>15+</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Manager Cementing Laboratory to lead cementing laboratory operations and provide technical support for oil &amp; gas cementing projects. The role is responsible for laboratory testing, cement slurry design, job simulations, quality assurance, troubleshooting, and team leadership while ensuring compliance with API and QHSE standards.</p><p>Key Responsibilities</p><ul><li>Manage day-to-day cementing laboratory operations.</li><li>Design and evaluate cement slurries for primary and remedial cementing.</li><li>Conduct laboratory testing, including rheology, fluid loss, thickening time, and compressive strength.</li><li>Provide technical support to engineering, operations, sales, and clients.</li><li>Troubleshoot cementing challenges and recommend solutions.</li><li>Maintain laboratory equipment, SOPs, and quality documentation.</li><li>Lead and develop laboratory personnel while promoting a strong safety culture.</li><li>Ensure compliance with API standards, QHSE policies, and continuous improvement initiatives.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Engineering, Chemistry, or related discipline (Master s preferred).</li><li>12 15 years of cementing laboratory experience in the oil &amp; gas industry.</li><li>Strong expertise in cement slurry design, laboratory testing, and job simulation software.</li><li>Previous leadership experience managing laboratory teams.</li><li>Excellent analytical, communication, and stakeholder management skills.</li></ul><p>Benefit of Working with Visuna?</p><ul><li>A dedicated member of the team responsible for your placements and welfare</li><li>Some of the best day rates in the industry</li><li>FREE worldwide insurance and Medevac cover whist on a Placement</li><li>24/7 access to our specialist support team</li><li>Assistance and advice on a range of business topics</li><li>FREE access to our Competency Scheme</li><li>Increased exposure to potential clients and more placement opportunities</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><span >Your Responsibilities</span></p><ul><li>Provide back-office support to the Professional Services team through Roche Field Service solutions, including case creation and dispatching to assigned personnel</li><li>Collaborate with the Service Team Leader to prepare necessary documents and schedule instrument implementations with customers, manage preventive maintenance (PM) schedules, and upload PM reports for invoicing processes for public and private hospitals.</li><li>Manage spare parts by arranging courier services, overseeing spare part inventory, ordering, and collaborating with supply chain for order follow-ups.</li><li>Liaise with various teams to prepare and send necessary documents (urgent letters, site service reports, etc.) to field engineers.</li><li>Collaborate with business partners (e.g., water units, UPS, 3rd-party materials, lab renovation contractors) to track daily pending issues and manage reminders.</li><li>Daily monitoring and updating of internal systems cases for field engineers; open, dispatch, and follow up on cases through to closure.</li><li>Archive both hard and soft copies of service documents and maintain organized filing systems in the office and core map.</li><li>Manage document flow between Roche, and the customers, including contracts, proposals, quotations, and repair requests.</li><li>Control the numbering, sorting, filing, and retrieval of documents produced by the technical team or department to ensure accuracy and security.</li><li>Support the team with petty cash management, handling departmental expenses, and processing documents efficiently.</li></ul><p>Your Opportunity</p><ul><li>Participants build an extensive network within Roche and upskill themselves</li><li>Best possible work environment is designed to foster participants' learning experience</li><li>Participants will have access to senior leaders and will be assigned to a mentor to support their career journey</li><li>Contributing to purpose driven projects and taking responsibilities from day 1</li></ul><p>Who You Are</p><ul><li>You hold a Bachelor degree in Life Sciences, Economy, Business Administration, or any related area</li><li>You are at an early stage in your career. Fresh graduates will be preferred</li><li>Having a basic understanding of healthcare system is preferred</li><li>You are eager to work with diverse cultures</li><li>You are curious and have passion for learning new things, and have high degree of integrity and courage</li><li>You have excellent communication and innovative skills</li><li>You are proficient in English</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>You hold a Bachelor degree in Life Sciences, Economy, Business Administration, or any related area</p><p>You are at an early stage in your career. Fresh graduates will be preferred</p><p>Having a basic understanding of healthcare system is preferred</p><p>You are eager to work with diverse cultures</p><p>You are curious and have passion for learning new things, and have high degree of integrity and courage</p><p>You have excellent communication and innovative skills</p><p>You are proficient in English</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Role Summary</b></p> <p>The Product Development Manager/Sr. Food Technologist leads technical product development across salty snacks portfolio — including chips, extruded snacks, and baked products. The role drives the innovation pipeline, ensuring that all products meet sensory, cost, and regulatory requirements while maintaining company reputation for quality and consumer appeal.</p> <p><b>Key Responsibilities</b></p> <p><b><span>A. Product Development &amp; Innovation</span></b></p> <ul> <li><span>Lead the formulation, bench development, and pilot-plant trials for new salty snack products.</span></li> <li><span>Work with Marketing to translate consumer insights into viable product concepts.</span></li> <li><span>Optimize formulations for cost, functionality, and sensory performance.</span></li> <li><span>Develop flavor and seasoning systems in partnership with suppliers.</span></li> <li><span>Coordinate sensory evaluations and shelf-life studies.</span></li> </ul> <p><b><span>B. Process Development</span></b></p> <ul> <li><span>Own the technical validation of new products on production lines (extruders, fryers, and dryers).</span></li> <li><span>Collaborate with Engineering on new equipment commissioning and process setup.</span></li> <li><span>Establish and document process parameters, standard operating procedures (SOPs), and line capability studies.</span></li> <li><span>Drive yield and oil absorption optimization.</span></li> </ul> <p><b><span>C. Cross-Functional Collaboration</span></b></p> <ul> <li><span>Partner with QA, Procurement, and Operations to ensure successful scale-up.</span></li> <li><span>Support Marketing in preparing product specifications, claims, and packaging validations.</span></li> <li><span>Liaise with supply chain and finance teams to cost models and margin targets.</span></li> </ul> <p><b><span>D. Continuous Improvement</span></b></p> <ul> <li><span>Analyze process data and implement improvements in product stability, quality, and efficiency.</span></li> <li><span>Benchmark KITCO's snack products against global competitors.</span></li> <li><span>Stay up to date on ingredient innovations, healthier oil alternatives, and flavor trends.</span></li> </ul> <p><b><span>E. Leadership &amp; Documentation</span></b></p> <ul> <li><span>Manage R&amp;D technologists or assistants assigned to snack development.</span></li> <li><span>Maintain full technical documentation: formulations, process sheets, trial reports, and product specifications.</span></li> <li><span>Ensure full compliance with Mezzan's HSE and Food Safety policies.</span></li> </ul> <p>&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul> <li><span>10-15 years' experience in savory snack manufacturing (extruded, pellet, and potato-based products).</span></li> <li><span>Proven track record of developing commercially successful products in regional or international snack companies.</span></li> <li><span>Strong understanding of formulation, processing, and frying systems (pellet frying, batch, and continuous lines).</span></li> <li><span>Capable of managing pilot trials, scale-up, and industrial validation in collaboration with operations and quality.</span></li> <li><span>Familiar with seasoning systems, oil management, shelf-life testing, and packaging interactions.</span></li> <li><span>Excellent project management and cross-functional coordination skills (Marketing, Procurement, QA, and Manufacturing).</span></li> <li><span>Ideally experienced with Middle East markets and consumer preferences.</span></li> </ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Production Stimulation Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Stimulation Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. </p><ul><li>Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process.</li><li>Assist as required with the development of technical job designs for PLs.</li><li>Assist with identifying areas where new and cost effective techniques can be applied.</li><li>Explore opportunities for value-added products and services.</li><li>Consult with Design/Technical Engineer role as required to optimize the technical design.</li><li>Assist in real-time incident response, recovery, and investigation as related to the area of expertise.</li><li>Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise.</li><li>Remain current on new technologies.</li><li>Maintain customer visibility through active participation in professional society activities and calls for papers.</li><li>Understand the competition's technical offering.</li><li>Participate in external technical societies and communities.</li><li>Contribute, write and review technical publications.</li><li>Engage with local universities, Customer institutes and research organizations.</li><li>Offers technical guidance to engineers or technicians assigned to work on a common project. Mentors junior stimulation engineers within Well Services and DCS.<br></li><li>Organizes client seminars, understands and catalogues client needs and implements solutions.<br></li><li>Is regarded as a stimulation expert within the oilfield community and represents Schlumberger in various and multiple industry forum.<br></li><li>Periodic publications in these forums are expected.<br></li><li>May participate in recruiting.</li></ul><p>15+</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

Company Description Kuwait Packing Materials Manufacturing Co. KSC (C), also known as K-PAK®, is a leading producer of extruded expanded disposable foam products serving the regional market. Since 1986, the company has supplied quality and innovative packaging solutions to the food industry, retail, catering, supermarkets, hypermarkets, and fast-food service sectors. K-PAK® focuses on reliable, safe, and efficient packaging that supports high-volume, customer-facing operations. The company values product consistency, operational excellence, and long-term partnerships with its clients, creating a stable environment for manufacturing professionals. Team members join a well-established organization with a strong reputation in packaging and continuous demand for its products. Duties & Responsibilities: •Design and develop molds according to product requirements and specifications, with preference for thermoforming molds used in plastic packaging applications.•Prepare detailed 3D models and 2D manufacturing drawings.•Perform reverse engineering of existing molds, tooling, and components when required.•Work closely with the CNC Machining, Tool Room, and Production teams to ensure manufacturability, accuracy, and effective mold performance.•Select suitable mold materials based on product and production requirements.•Support mold trials and identify design or manufacturing issues requiring modification.•Troubleshoot mold-related production problems and recommend design improvements to enhance product quality, cycle time, and mold performance.•Ensure mold designs consider appropriate tolerances, fits, surface finishes, and manufacturability.•Support the complete mold development cycle from concept and design through manufacturing, trial, modification, and final approval. Qualifications•Bachelor’s degree in Mechanical Engineering or equivalent.•Minimum 3-5 years of experience in mold design, preferably in thermoforming/plastic manufacturing.•Good knowledge of mold manufacturing and CNC machining processes.•Proficiency in CAD/design software; Solid Works preferred.•Ability to prepare and interpret technical drawings. Good problem-solving, analytical, and communication skills.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. JOB DETAILS Direct Report Project HSE Manager Operational Scope Civil Works | Drilling &amp; Completions | Work Over | Facilities | Production Supervises Mechanical Lifting contractors; Drilling Rig Lifting Crews; any Contractor performing Mechanical Lifting activities under SLB operational control; site level DROPS auditors and HSE Specialists in their execution of the DROPS Program</p><p>2. ROLE PURPOSE The Mechanical Lifting &amp; DROPS Subject Matter Expert Lead is the SLB Mutriba Project authority for the safe design, planning, execution, and continuous improvement of Mechanical Lifting and Dropped Objects Prevention (DROPS) activities across the Mutriba Field Development Project. The role combines planning and operational SME oversight of lifting operations with assurance of the Project's DROPS system implementation, ensuring full compliance with SLB standards, client requirements, and applicable regulatory frameworks across all project phases and contractor interfaces.</p><p>3. KEY RESPONSIBILITIES</p><p>Mechanical Lifting SME</p><ul><li>Lead the planning, preparation, implementation, monitoring, and review of Mechanical Lifting Plans (MLPs) for all project phases, including all prevention and mitigation measures.</li><li>Review and validate all critical lifting plans prepared by SLB and Contractors, categorize lifts in accordance with the Lift Categorization Questionnaire, and submit Critical and Non-Routine lifts to the right channels.</li><li>Personally supervise the execution of Non-Routine, Critical, and Complex lifts across all project locations, such as Rig Mobilization, Initial Rig Moves, Skidding operations and de-mobilization.</li><li>Ensure all lifting risk assessments (HARC/JSA) are prepared, reviewed, and adequate prior to the commencement of any lifting operation.</li><li>Assess Pre-Job Safety Meetings (PJSMs) related to mechanical lifting operations and verify that controls identified in the MLP and HARC are communicated and understood by all participants.</li><li>Advise and stop lifting operations during adverse weather conditions (lightning, high-wind events) and verify suspension and resumption criteria are clearly defined and enforced at site level.</li><li>Establish, maintain, and audit all Project Lifting Equipment Registers across all rig sites and call-out services, ensuring all lifting appliances and accessories are inspected, certified, color-coded, and fit for purpose.</li><li>Verify that third-party lifting equipment introduced to SLB managed sites holds valid certification from an LEEAaccredited or equivalent body, aligned with applicable standards.</li><li>Ensure adequate storage and in-service maintenance of all lifting gear and accessories in accordance with Project and client s requirements.</li><li>Drive compliance with SLB's Mechanical Lifting Standard (SLB-HSE-S013) and Mechanical Lifting B.O.O.K. (SLB-HSE-M013) across all contractor interfaces.</li><li>Conduct frequent, structured audits of all ML activities and equipment at rig sites and call-out service locations, documenting findings and tracking corrective actions closure.</li><li>Perform ML related assessments for the Annual Audit and Inspection Plan (AAIP) to verify ongoing compliance with SLB standards, client procedures, and regulatory requirements.</li><li>Report all lifting-related events in QUEST (SLB incident management system) in a timely manner, ensuring accuracy of classification, causal analysis, and corrective/preventive action assignment.</li><li>Lead or actively participate in investigations of any incident, near miss, or high-potential event related to mechanical lifting operations.</li><li>Coach, assess, and verify the competence of personnel involved in ML operations such as Lifting Supervisors, Crane Operators, Banksmen, and Riggers, against defined competency frameworks.</li><li>Maintain competency assessment records and ensure training validity periods are tracked and renewed.</li><li>Deliver or coordinate delivery of ML awareness and technical training as required by project needs.</li><li>Serve as primary interface with customer s Lifting Authority for ML plans, approvals, and regulatory compliance.</li></ul><p>DROPS Authority</p><ul><li>Project-level DROPS Program Assurance Lead for integrity, consistency, and effectiveness of the DROPS prevention program across all Mutriba Project locations.</li><li>Review, evaluate, and formally validate DROPS Inspection Reports submitted by rig sites and service locations, verifying accuracy on findings, classification, and effectiveness and closure of corrective actions.</li><li>Validate the correct implementation of DROPS, including DROPS Zone identification, zoning maps, barrier deployment, DROPS Picture Books, tethered tool program, and related.</li><li>Conduct structured DROPS Program audits across all active project phases and locations, assessing compliance with SLB-HSE-S023 (DROPS Standard) and the DROPS B.O.O.K. (SLB-HSE-M023).</li><li>Verify DROPS inspection checklists for rig-ups, and the maintenance of DROPS Inspection Schedules.</li><li>Support site-level HSE Supervisors in identifying dropped object and Work at Height hazards.</li><li>Ensure DROPS incidents are reported, classified, and investigated in accordance with project and SLB requirements, and lessons-learned dissemination across the project.</li><li>Maintain and monitor DROPS program performance metrics; escalate systemic non-conformances.</li></ul><p>Additional Responsibilities</p><ul><li>Participate in Project HAZOP/HARC processes as the ML and DROPS SME for ML scenarios under review.</li><li>Support development and review of project HSE Plans, procedures, and standards related to ML and DROPS.</li><li>Contribute to pre-mobilization readiness reviews as the ML/DROPS technical authority.</li><li>Support emergency response planning for lifting-related scenarios (crane collapse, load drop, manriding rescue) and verify that adequate rescue plans are in place.</li><li>Assist developing the Annual Audit and Inspection Plan (AAIP) for ML and DROPS activities.</li></ul><p>4. AUTHORITY</p><ul><li>Authority to Stop Work on any mechanical lifting or related activity that does not comply with approved lift plans, SLB standards, or client requirements.</li><li>Authority to reject and require re-submission of non-compliant lift plan with SLB or client requirements.</li><li>Authority to require the removal of lifting equipment or accessory found defective, uncertified, or non-compliant.</li><li>Authority to withhold validation for any site or location non-compliant with DROPS system requirements.</li><li>Authority to escalate non-conformances to Contractor and Project Management</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in engineering or Technical Career</li><li>Professional Certification: LEEA Appointed Person for Lifting Operations or similar.</li><li>Third-party certification credited by LEEA or NSL.</li><li>DROPS Level 3 Focal Point.</li><li>Minimum 10 years of experience in a dedicated Mechanical Lifting supervisory or SME capacity, preferably on the Oil &amp; Gas Industry.</li><li>Demonstrated experience operating in multi-contractor onshore drilling environments, including direct supervision of crane, rigging, and lifting appliance crews.</li><li>Prior experience conducting DROPS program audits and managing DROPS systems at rig or field level</li><li>Fluent English mandatory. Arabic is an advantage.</li></ul><p></p></section>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Responsibilities<br><br><br>•&nbsp;&nbsp; &nbsp;Lead and supervise a team of irrigation technicians and workers to ensure successful project completion.<br>•&nbsp;&nbsp; &nbsp;Analyze contract drawings and specifications to develop detailed and workable Bills of Quantities (BOQs) and shop drawings.<br>•&nbsp;&nbsp; &nbsp;Conduct and interpret mechanical and technical calculations based on project requirements to optimize daily water usage.<br>•&nbsp;&nbsp; &nbsp;Prepare and submit manufacturer data sheets for irrigation equipment, ensuring compliance with project specifications and approvals.<br>•&nbsp;&nbsp; &nbsp;Create and maintain project documentation including Method Statements, Work Instructions, Work Progress Reports, and other relevant documents.<br>•&nbsp;&nbsp; &nbsp;Collaborate with supervisory consultants to facilitate site inspections and obtain necessary approvals.<br>•&nbsp;&nbsp; &nbsp;Develop and implement site work construction plans, securing approval from senior management.<br>•&nbsp;&nbsp; &nbsp;Manage project budgets, ensuring adherence to allocated resources throughout the project lifecycle.<br>•&nbsp;&nbsp; &nbsp;Possess a strong understanding of annual project budgets and effectively manage project costs.<br><br><br><br>Candidate Requirements<br>Qualifications:<br>Bachelor's degree in Civil Engineering, Agricultural Engineering, or a related field<br>Experience:<br>Minimum of 5-7 years of experience in a senior irrigation engineer role or similar position<br>Other Skills and Competencies:<br>•&nbsp;&nbsp; &nbsp;Excellent communication and interpersonal skills, with the ability to collaborate effectively with diverse stakeholders.<br>•&nbsp;&nbsp; &nbsp;Proficient in Microsoft Office Suite (Word, Excel, PowerPoint).<br>•&nbsp;&nbsp; &nbsp;In-depth knowledge of irrigation systems, equipment, and technologies.<br>•&nbsp;&nbsp; &nbsp;Strong analytical and problem-solving skills.<br>•&nbsp;&nbsp; &nbsp;Excellent presentation skills with the ability to effectively communicate technical concepts to both technical and non-technical audiences.<br>•&nbsp;&nbsp; &nbsp;Commitment to safety and adherence to industry best practices.&nbsp;<br>•&nbsp;&nbsp; &nbsp;Proven track record of successfully leading and managing irrigation projects from concept to completion.<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">The Senior Irrigation Engineer is responsible for the overall execution and maintenance of irrigation systems within landscape projects. This role provides leadership and technical expertise to ensure projects meet design specifications, budgets, and deadlines.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Surbana Jurong</b></p><br><p>Surbana Jurong Group (SJ) is a leading global urban, infrastructure, and engineering consulting firm headquartered in Singapore. Driven by a vision to build cities and shape lives, SJ delivers sustainable, innovative, and integrated solutions across the built environment. With a strong presence across Asia, the Middle East, and Africa, SJ provides multidisciplinary expertise in transport, ports, marine, water, energy, buildings, and large-scale infrastructure projects.</p><br><p>SJ partners with governments, multilateral development agencies, and private sector clients to plan, design, supervise, and manage complex infrastructure projects throughout their lifecycle. By combining global expertise with local knowledge, SJ delivers practical, high-impact solutions that enhance connectivity, strengthen communities, and support long-term sustainable development.</p><br><p><b>The role</b></p><br><p>We are seeking an experienced <b>Senior Instrument &amp; Control Engineer </b>to support the delivery of major utility, industrial, and infrastructure projects. The successful candidate will provide technical oversight of instrumentation, automation, control, and SCADA systems throughout construction, testing, commissioning, and handover phases, ensuring reliable system integration and operational performance.</p><br><ul><li>Provide technical supervision of instrumentation, automation, control, telemetry, and SCADA system installation activities across complex infrastructure projects.</li><li>Review engineering documentation, instrumentation layouts, control philosophies, P&amp;IDs, loop diagrams, technical submittals, and construction methodologies.</li><li>Monitor installation, testing, commissioning, and system performance verification activities to ensure compliance with project requirements and industry standards.</li><li>Support factory and site acceptance testing, loop checking, system integration, and operational readiness assessments.</li><li>Oversee quality assurance and quality control processes for instrumentation, control, and automation systems.</li><li>Coordinate closely with multidisciplinary engineering teams to support seamless integration of electrical, mechanical, process, and control systems.</li><li>Maintain commissioning records, technical documentation, defect tracking registers, and project reporting requirements.</li><li>Review as-built documentation, operation and maintenance manuals, and handover deliverables.</li><li>Provide technical support for troubleshooting, system optimization, risk mitigation, and continuous improvement initiatives.</li></ul><p>With a track record of achievement in a related role, you will have gained your experience in a consultancy environment and have a passion for building trusted relationships to drive positive change and win new work.</p><br><p>Suitable applicants will have/be:</p><br><ul><li>Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Automation Engineering, or a related discipline.</li><li>Minimum 15 years’ experience in instrumentation, control, automation, or SCADA engineering on major utility, industrial, water, or infrastructure projects.</li><li>Strong knowledge of PLC, SCADA, telemetry, field instrumentation, control systems, communication networks, and integrated plant automation.</li><li>Demonstrated experience in testing, commissioning, loop checking, system integration, and performance verification of complex control systems.</li><li>Proven ability to review engineering documentation, control philosophies, instrumentation drawings, technical submissions, and contractor deliverables.</li><li>Experience coordinating multidisciplinary interfaces during construction, commissioning, and operational handover phases.</li><li>Excellent communication, stakeholder engagement, and technical reporting skills with strong English language proficiency.</li></ul><p>Surbana Jurong Group is an equal opportunity employer. We believe that diversity, equity, and inclusion strengthen our people, enrich our perspectives, and enable us to deliver better outcomes for our clients, partners, and the communities we serve.</p><br><p><b>How to apply </b></p><br><p>All applications must be submitted online and for a confidential discussion regarding this opportunity, please contact<b>&nbsp;Taimoor Tariq - </b><b>Taimoor.tariq@sjgroup.com</b></p><br><p>For further information about Surbana Jurong Group, please visit our website at www.surbanajurong.com.</p><br><p>To explore career opportunities and learn more about working with SJ Group, please visit our Careers page at SJ Careers.</p><br><p>All recruitment activities are managed by the Recruitment &amp; Talent team. At this stage, this position does not require agency support. Kindly do not forward resumes directly to SJ Group employees.</p><br><p>At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!</p><br> </div>

<p>We are seeking a highly motivated and experienced Project Management Engineering Professional (Project Lead Engineer) to join our dynamic team at Hitachi, Ltd. This role will be responsible for leading the technical aspects of complex engineering projects from conception to completion, ensuring successful delivery within scope, budget, and schedule. The ideal candidate will possess a strong blend of technical expertise, project management skills, and leadership capabilities.</p><p><strong>Job Responsibilities</strong></p><ul><li>Lead and manage the technical execution of engineering projects, overseeing design, development, testing, and deployment phases.</li><li>Define project technical objectives, scope, and deliverables in collaboration with stakeholders and ensure alignment with business goals.</li><li>Develop and maintain comprehensive project plans, schedules, and resource allocation strategies.</li><li>Identify, assess, and mitigate technical risks and issues throughout the project lifecycle.</li><li>Manage and mentor project engineering teams, providing technical guidance and fostering a collaborative work environment.</li><li>Communicate project status, technical challenges, and solutions effectively to internal and external stakeholders.</li><li>Ensure adherence to relevant engineering standards, quality procedures, and regulatory requirements.</li><li>Conduct technical reviews and approvals of designs, specifications, and documentation.</li><li>Contribute to the continuous improvement of engineering processes and methodologies.</li><li>Collaborate with cross-functional teams, including R&amp;D, manufacturing, procurement, and sales, to achieve project objectives.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Qualifications</strong></p><ul><li>Bachelor's degree in Electrical Engineering</li><li>Minimum of 14 years of experience in engineering, with at least 5 years in a project lead role</li><li>Proven track record of successfully leading and delivering complex engineering projects.</li><li>Excellent leadership, communication, and interpersonal skills.</li><li>Ability to manage multiple priorities and work effectively in a fast-paced environment.</li><li>Strong analytical and problem-solving abilities.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Code: PegaY2018-S01 IT Software Sales (IT Sales &amp; Services) OVERVIEW: Pegasus is the leading provider of technology solutions. We empower and help grow our clients business by providing customized and innovative solutions ranging from enterprise infrastructure to retail store-level technology. Pegasus has an extensive team of dedicated professionals to provide support and meet all our client s requirements. Pegasus has a strong presence in the retail industry. We offer a full range of professional services to retailers. Pegasus is a systems integrator of data collection equipment and solutions. Pegasus systems integration specialists and factory-trained technicians are experts in wireless radio frequency network and ERP integration solutions, enterprise labelling, barcode printers, scanners, mobile computing, terminal and software technologies.</p><p>MAJOR RESPONSIBILITIES:</p><ul><li>Responsible for Business development for ERP software business activities</li><li>Actively participate in the advertising, distribution and marketing of the goods &amp; services of the company</li><li>Representing the company at different places such as conferences, meetings, seminars etc</li><li>Create leads &amp; identifying new potential clients/ opportunities for the company</li><li>Fully understand the IT Products, services &amp; solutions</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>ESSENTIALS / REQUIREMENTS:</p><ul><li>Graduate/ Post Graduate in Engineering/ IT/ Business/ Marketing</li><li>Minimum 3 years of marketing experience, or sales experience with strong marketing orientation</li><li>Experience in IT Hardware/ Software Solutions sales with strong Functional/Technical Knowledge</li><li>Excellent verbal and written communication skills (English &amp; Arabic)</li><li>Tactful negotiations skills</li><li>Strong organizational skills</li><li>Effective presentation, implementation and follow-up skills</li><li>Must be very flexible and adaptable to changes</li><li>Must have Kuwait Driving License</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Production Optimization Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Optimization Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. </p><ul><li>Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process.</li><li>Assist as required with the development of technical job designs for PLs.</li><li>Assist with identifying areas where new and cost effective techniques can be applied.</li><li>Explore opportunities for value-added products and services.</li><li>Consult with Design/Technical Engineer role as required to optimize the technical design.</li><li>Assist in real-time incident response, recovery, and investigation as related to the area of expertise.</li><li>Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise.</li><li>Remain current on new technologies.</li><li>Maintain customer visibility through active participation in professional society activities and calls for papers.</li><li>Understand the competition's technical offering.</li><li>Participate in external technical societies and communities.</li><li>Contribute, write and review technical publications.</li><li>Engage with local universities, Customer institutes and research organizations.</li></ul><p>10+</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p><br></p><p>1. HVAC Design &amp; Equipment Selection</p><p>•Review project drawings, specifications, BOQs, and tender documents.</p><p>•Perform cooling load calculations when required and review project cooling requirements.</p><p>•Design and select VRF systems based on project requirements and manufacturer guidelines.</p><p>•Select indoor units, outdoor units, controls, accessories, and other related equipment.</p><p>•Prepare refrigerant piping layouts and verify piping limitations and system capacities.</p><p>•Prepare equipment schedules and detailed BOQs.</p><p>•Support the selection of packaged units, ducted split systems, and other DX air-conditioning equipment when required.</p><p>•Optimize equipment selections to provide technically compliant and commercially competitive solutions.</p><p>2. Technical Proposals &amp; Submittals</p><p>•Prepare complete technical proposals and equipment selections for projects.</p><p>•Prepare technical submittals including datasheets, equipment schedules, compliance statements, selection reports, drawings, and supporting documents.</p><p>•Review project specifications and prepare detailed compliance statements.</p><p>•Identify deviations from project specifications and propose suitable technical alternatives.</p><p>•Coordinate technical submittals with the sales team before submission to consultants and customers.</p><p>3. Sales &amp; Tender Support</p><p>•Provide technical support to Sales Engineers during tendering and quotation stages.</p><p>•Review customer enquiries and recommend the most suitable HVAC solution.</p><p>•Assist the sales team in preparing accurate BOQs and equipment cost requirements.</p><p>•Support value engineering exercises to improve competitiveness while maintaining project requirements.</p><p>•Attend technical meetings with consultants, contractors, and customers when required.</p><p>•Conduct technical presentations and explain proposed VRF solutions to customers and consultants.</p><p>•Support the sales team during technical negotiations and clarification meetings.</p><p>4. Project &amp; Technical Coordination</p><p>•Coordinate with consultants, MEP contractors, main contractors, and customers regarding technical requirements.</p><p>•Review approved drawings and BOQs before order placement to ensure correct equipment selection.</p><p>•Coordinate with suppliers/manufacturers regarding technical clarifications and special project requirements.</p><p>•Support the project and after-sales teams with technical information during installation and commissioning when required.</p><p>•Review site conditions when necessary and provide recommendations related to equipment application and installation.</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Requirements</p><p><b>Educational Qualifications</b></p><p>Education Degree</p><p>: Bachelor</p><p>Major</p><p>: Mechanical Engineering</p><p><b>Experience</b></p><p>Years of Experience</p><p>: 3 - 5&nbsp;&nbsp;Years</p><p><br></p><p>Field of Experience</p><p><br></p><p>: HVAC application engineering, design, VRF systems, or technical support.</p><p><br></p><p><b>Skills</b></p><p><br></p><p>•Strong technical knowledge of VRF systems and commercial HVAC applications.</p><p>•Strong knowledge of VRF selection and design software.</p><p>•Good understanding of cooling load calculations and HVAC design principles.</p><p>•Ability to read and interpret mechanical drawings, specifications, and BOQs.</p><p>•Good knowledge of refrigerant piping design and VRF system limitations.</p><p>•Knowledge of HVAC controls, central controllers, and BMS integration would be an advantage.</p><p>•Good understanding of equipment selection and technical comparison between different HVAC solutions.</p><p>•Strong analytical and problem-solving skills.</p><p>•Good communication and technical presentation skills.</p><p>•Ability to handle multiple projects and tender submissions simultaneously.</p><p>•Proficiency in AutoCAD &amp; good knowledge of Microsoft Office applications</p><p><b>Other Requirements</b></p><p>Gender</p><p>: Male</p><p>Age</p><p>: 25 - 40&nbsp;&nbsp;Years</p><p>Preferred Language</p><p>: Arabic, English</p><p>Duty Shift / Timings</p><p>: One Shift / 8:00AM to 4:00PM</p><p>Salary &amp; Benefits</p><p>Salary</p><p>: Attractive Salary</p><p>Other Benefits</p><p>: As per the company policy.</p><p><br></p></div>