Chemical Engineer Jobs in Kuwait

Job Location - Kuwait<br><br>Qualification And Experience<br><br>Education: B. Sc. in Mechanical, Metallurgical, Chemical, Petroleum, Electrical, Instrument Engineering, or equivalent.<br><br>Experience: 20+ years of professional experience within an Oil & Gas operating company.<br><br>Technical Knowledge And Skills<br><br>Expertise in Technical Safety Project documentation (e.g., TSE philosophies, Asset Integrity – Process Safety (AI-PS) principles, Project Specification). Leak Path Reduction Layout Optimization Hazardous Area Classification Toxic Facility Classification Analysis Fire Protection Analysis Active and Passive Fire Protection Design Fire Safety Assessment Flare Radiation, Toxic, and Noise Assessment Design aspects including fire protection escalation mitigation, atmospheric relief (vents at safe locations) and flare, hazardous area classification, noise mitigation, F&G detector location, Cause and Effects, safeguarding memorandum, and 3-D Model reviews. Safety Critical Elements Identification and Design Performance Standards ALARP Demonstration Process Technical Pre-Start-Up Safety Reviews (PSSR) PHSERSafe Work Practices and Procedures: PTW, JSA, Management of Change, human error, and human factors Fires and Explosions: Fundamentals, hazard evaluation, prevention and mitigation, codes and standards Alarm Management and Rationalization Hazardous Material Management PSM Communication<br><br>Job Description<br><br>Implement Process Safety Management (PSM) systems, including safety culture. Develop and maintain Technical Safety Project documentation such as TSE philosophies, Asset Integrity – Process Safety (AI-PS) principles, and Project Specifications. Provide design, technical support, and troubleshooting for upstream oil & gas operations. Ensure safety in design and engineering practices, focusing on inherently safer design and compliance with industry standards (e.g., API, BS, JEC, NFPA).<br><br>Conduct Analysis Techniques Including<br><br>Hazard Identification (HAZID) facilitation and Risk Register Hazard Analyses using Bow-Tie, HAZOP & LOPA methodologies Qualitative and Quantitative Risk Assessment (QRA), utilizing PHAST Risk software and Computational Fluid Dynamics (CFD) software. Frequency Analysis methodologies such as FTA, FMEA, & ETADevelop and implement emergency preparedness plans, including scenario development, prevention, response, and recovery. Lead Major Hazard Incident Investigations (involving fire or explosion). Prepare PSM communication tools and materials such as e-mails, newsletters, awareness presentations, videos, posters, screen savers, and campaigns. Participate in Safety Critical Elements Identification and the development of Performance Standards.<br><br>Skills<br><br>Technical interface with HSE regulators, insurers and other key external stakeholders Able to connect upstream oil and gas process hazards to equipment requirements Able to specify performance standards for safety critical systems Able to supply day to day operational support in mitigating risks Able to proactively apply engineering and problem-solving skills to meet challenging process safety, safety and business objectives. Able to work independently and in teams, both as a team member and leader

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Primary Objective<br><br>To coordinate implementation of the KOC PMC Safety policies, HSE Management System and Project specific HSE. Management Plans as they apply to the project. Ensure that the site complies with the relevant HSE Legislation and KOC HSE requirements. Develop and implement the project HSE MS. Develop and maintain Statistical data for the Project. Prepare reports as required for the Worley Parsons KOC PMC HSEQ Manager. Position Reports to: HSE / QA / QC Manager.<br><br>Specific Accountabilities<br><br>Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment. Ensure the EPC contractors develop implement and maintain a specific project Risk Management Plan. Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations. Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements. Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action. Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/ additions to requirements as they come into effect. Review EPC contractor Safety Management System and advise of required changes. Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractor to foster the professional image of Worley Parsons. Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken. Other key activities shall include but not be limited to the following:Pro-actively visit site and with the EPC contractor implement safety measures- promote/ensure safe work practices. Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings. Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained. Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmers. Maintain a HS&E audit and assessment program for the location. Carry out regular inspections of the work areas with the respective EPC contractor line manager and or HSE representative and prepare reports. Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc. Assist EPC contractor line management and or construction supervisors in accident investigation process and report accordingly. Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives. Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors Monitor the availability and use of safety apparel and equipment. Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training,Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls Ensure all lines of communication on HSE-matters remain open and effective between all parties particularly KOC, Worley Parsons, EPC contractors and their subcontractors.<br><br>Qualification<br><br>Bachelor's degree in engineering (Mechanical, Chemical, Petroleum, Fire & Safety, Environment, Production, Industrial, Electrical, Instrumentation or Civil.) Minimum years total post-graduation experience. Minimum years Oil & Gas post-graduation experience. Minimum years' experience in a Safety /HSE Engineer. Practical experience with HSE management systems, reporting and audit procedures. Ability to develop, update and maintain in – house procedures. Must be conversant with local & international safety standards and norms. Practical experience of design, construction, commissioning and maintenance aspects of oil & gas installations.<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

<strong>Overview</strong> <br> <br> <p> <strong>**This position will be physically located in Kuwait**</strong> </p> <p> </p> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <p> </p> <p>Performs complex administrative tasks in receiving, storing, inventorying, and issuing Government Material/Property and compiles automated stock records in Maximo, IFS, and GCSS-A systems. Submits acquisitions, tracks orders, and perform receipt transactions in GCSS-A system. Processes customers materiel/equipment orders and validates contractual requirement to acquire IAW the Program s PWS. Perform 3-way match, receive, segregate and issue materiel/equipment to customers. CAC should have the ability to obtain one.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong> <em> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span></em> </strong> </p> <ul> <li> <p>Screens and validates acquisitions throughout the entire LCV KU TO. </p> </li> <li> <p>Validates acquisitions financial and contractual compliance.</p> </li> <li> <p>Submits customer acquisitions and tracks orders in Maximo, IFS, and GCSS-A system.</p> </li> <li> <p>Coordinates, reconciles, and expedites materiel/equipment acquisitions.</p> </li> <li> <p>Accesses DLA Logistics systems to track incoming shipments.</p> </li> <li> <p>Performs receipt transactions in Maximo, IFS, and GCSS-A system. </p> </li> <li> <p>Validates and processes suppliers invoices for approval and payments.</p> </li> <li> <p>Maintains files used and prepared in accordance with governing rules, regulations, and policies, to include archiving records using GCSS-Army system.</p> </li> <li> <p>Runs daily reports in MAXIMO, IFS, and GCSS-A systems. </p> </li> <li> <p>Runs the warehouses Re-order analysis report and analyzes the stockage levels. </p> </li> <li> <p>Submits replenishment orders in Maximo and GCSS-A systems.</p> </li> <li> <p>Prepare, read, and analyze records and reports necessary to execute actions accordingly. </p> </li> <li> <p>Perform other duties as required.</p> </li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Education/Experience Requirements</strong> </li> <li> <strong>Minimum Qualifications: Education/Certifications:</strong> One-year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>High School Diploma or equivalent.</li> <li>GCSS-A Certification desired. If no certification, must successfully complete web based or in-person training courses within 90 days of assuming the position.</li> <li>Must be CAC eligible and/or able to obtain a Common Access Card (CAC)</li> <li>Must be a U.S. Citizen</li> </ul> </li> <li> <strong>Skills</strong> <br> <ul> <li>Experience in military or commercial supply management system. GCSS-Army and DLA Program experience is preferred.</li> <li>Strong- knowledge level of automated financial and accounting systems.</li> <li>IFS experience is desired.</li> <li>Maximo system experience is desired.</li> <li>Ability to develop training materials using the latest electronic tools and deliver training to a multinational work force with varying language skills.</li> <li>Microsoft Office, with intermediate to advanced Excel skills</li> <li>Strong analytical skills</li> <li>Customer Service training</li> </ul> </li> <li> <strong>Physical Requirements</strong> <br> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> </ul> </li> <li> <strong>Visual Acuity</strong> <br> <ul> <li>The worker is required to have visual acuity to determine the accuracy, neatness, and thoroughness of the work assigned (i.e., custodial, food services, general laborer, etc.) or to make general observations of facilities or structures (i.e., security guard, inspection, etc.).</li> </ul> </li> <li> <strong>Working Conditions</strong> <br> <ul> <li>The worker is subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.</li> </ul> </li> </ul> <p> </p>

<strong>Overview</strong> <br> <br> <p> <strong>**This position will be physically located in Kuwait**</strong> </p> <p> </p> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <p> </p> <p>Under the supervision of the Lead Technical Inspector, performs initial, in-progress and final inspections on various types of military, commercial, and other forms of Automotive equipment. Makes proper classification determinations as it pertains to U.S. Government property. Assists Shops as needed with Troubleshooting processes. Uses proper Test Measurement and Diagnostics Equipment (TMDE) in the daily operations phase. Conducts Actual Cost of Damages (ACOD), Estimated Cost of Damages (ECOD), and Estimated Cost of Repairs (ECOR). Conduct Tests on Serviced, Repaired and Overhauled equipment to ensure operating efficiency before returning to customer. Understands the automotive repair shop equipment and functions in order to provide assistance and coverage whenever needed. Perform technical research and ensure operational readiness of assigned equipment.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <em> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span></em> </p> <ul> <li>Perform initial, in-progress, classification and final inspections.</li> <li>Utilize Global Combat Support System-Army (GCSS-A), DOD CAC access required. </li> <li>Operate and inspect equipment to diagnose and troubleshoot defects.</li> <li>Use technical manuals, bulletins and written directives in the performance of all inspections.</li> <li>Examine parts for damage or excessive wear using micrometers and gauges.</li> <li>Order required repair parts using appropriate military or COTS technical manuals.</li> <li>Perform battlefield damage assessment and repair (BDAR).</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>MINIMUM QUALIFICATIONS:</strong> </li> <li> <strong>Education/Certifications:</strong> One year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>High School Graduate or equivalent.</li> <li>Requires civilian trade qualification or US Army/Air Force/USMC Wheel Mechanic or equivalent (DD214 required).</li> <li>A valid US Driver s License and the ability to obtain a U.S. Government Motor Vehicle Operator s License and Kuwait Driver s License are required.</li> </ul> </li> <li> <strong>Experience:</strong> <br> <ul> <li>A minimum of Five (5) years experience in Automotive Repair, Shop operations or equivalent combination of education and experience is required.</li> <li>A minimum of two (2) years experience as a Technical Inspector is required.</li> </ul> </li> <li> <strong>Skills:</strong> <br> <ul> <li>Must possess the technical skills to identify different repair requirements as it pertains to Automotive Equipment.</li> <li>Must have expert knowledge of Technical and Commercial manuals for Servicing, Operational and Repair so that the correct procedures are used on the proper equipment.</li> <li>Must be an expert in Corrective Actions performed by the Maintenance Teams and only ensure that equipment is FMC when cleared by the shops</li> <li>Must have full knowledge of TMDE and its proper usage.</li> <li>Must be proficient in how the repair parts system works and what to do when it doesn t work correctly.</li> <li>Must be proficient in all phases of the paperwork that pertains to the Services, maintenance, repairs, classification and etc.</li> <li>Must have expert knowledge of the maintenance prints so as to be able to establish workload priority.</li> <li>Must have expert knowledge of Load Test procedures and processes.</li> <li>Must have expert knowledge of equipment operations as it is critical to working as a master driver for that shop.</li> <li>Ability to inspect check and test all types of automotive equipment.</li> <li>Must have a working knowledge of the Army Corrosion Prevention program.</li> <li>Must be Knowledgeable of the Army Maintenance Management Systems (TAMMS)</li> </ul> </li> <li> <strong>Physical Requirements</strong> <br> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> </ul> </li> <li> <strong>Working Conditions</strong> <br> <ul> <li>The worker is subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.</li> <li>The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.</li> </ul> </li> </ul> <p> </p>

<p>Job Purpose The Data Center Mechanical Engineer owns the mechanical and cooling infrastructure of the data center at engineering level, from the central cooling plant through to the data hall cooling environment. The role is responsible for mechanical maintenance strategy, system reliability, operational procedures, environmental performance, vendor management, safety compliance, spare-parts planning, and emergency response. The Mechanical Engineer directs the Mechanical Manning Technicians, authorizes equipment changeovers and critical maintenance activities, approves mechanical procedures, and acts as the mechanical technical authority during incidents and operational escalations.</p><p>Key Responsibilities and Areas of Ownership</p><ul><li>Take engineering ownership of the data center mechanical and cooling infrastructure, including chillers, cooling towers, chilled-water pumps, condenser-water pumps, heat exchangers, CRAH units, CRAC units, AHUs, ventilation systems, fans, filters, coils, valves, actuators, piping systems, and associated controls.</li><li>Manage the operation, reliability, and performance of chilled-water and precision-cooling systems serving the data halls and supporting areas.</li><li>Own mechanical equipment operating procedures, changeover procedures, start-up and shutdown sequences, and equipment rotation plans.</li><li>Authorize, lead, and supervise critical mechanical activities, including chiller changeovers, pump changeovers, cooling-tower changeovers, isolation activities, system draining, system filling, and restoration of equipment to service.</li><li>Monitor and maintain data hall environmental conditions, including temperature, humidity, airflow, differential pressure, cooling capacity, and equipment loading.</li><li>Review chilled-water supply and return temperatures, water flow, system pressure, differential pressure, valve positions, and system delta-T to identify performance issues and operational risks.</li><li>Manage cooling redundancy and capacity to ensure sufficient cooling remains available during maintenance, equipment failure, testing, or abnormal operating conditions.</li><li>Own the mechanical safety program, including Lockout/Tagout, Permit to Work, risk assessments, safe isolation, refrigerant safety, chemical-handling controls, and compliance with HSE requirements.</li><li>Develop and manage the annual mechanical Planned Preventive Maintenance program in accordance with OEM recommendations, equipment criticality, maintenance history, and operational requirements.</li><li>Prepare, review, approve, and maintain mechanical Standard Operating Procedures, Methods of Procedure, Emergency Operating Procedures, maintenance instructions, risk assessments, and equipment changeover procedures.</li><li>Ensure that all mechanical maintenance activities are planned around available cooling redundancy and executed without compromising data center availability.</li><li>Own vendor coordination for mechanical maintenance activities and supervise OEM major services, equipment overhauls, repairs, inspections, and specialist testing.</li><li>Review vendor method statements, risk assessments, service reports, test results, recommendations, and corrective-action requirements.</li><li>Manage critical spare-parts and inventory planning for chillers, pumps, cooling towers, CRAH and CRAC units, valves, actuators, sensors, filters, belts, bearings, motors, VFDs, and other mechanical systems.</li><li>Analyze cooling-system performance, equipment efficiency, energy consumption, operating trends, alarm history, temperature profiles, water-flow conditions, and equipment loading.</li><li>Identify and implement opportunities to improve cooling efficiency, airflow management, chilled-water performance, equipment sequencing, and overall energy performance without reducing system resilience.</li><li>Investigate mechanical faults, high-temperature conditions, leaks, abnormal vibration, low-flow conditions, low delta-T, equipment trips, control failures, and recurring alarms.</li><li>Lead root cause analysis for mechanical incidents and equipment failures and implement corrective and preventive actions.</li><li>Direct, develop, and train Mechanical Manning Technicians in operational procedures, inspections, first-line maintenance, alarm response, safe isolation, and incident escalation.</li><li>Review technician shift logs, inspection checklists, operating readings, alarm reports, and job-card closure records.</li><li>Support testing and commissioning activities, integrated systems testing, functional performance testing, equipment acceptance, redundancy verification, and operational-readiness activities.</li><li>Support predictive and condition-based maintenance programs, including vibration analysis, oil analysis, refrigerant checks, water and coolant sampling, thermal inspections, leak detection, and equipment-performance trending.</li><li>Manage liquid-cooling systems, Cooling Distribution Units, coolant loops, leak-detection systems, valves, pumps, and associated controls where installed.</li><li>Coordinate water-treatment activities, water-quality monitoring, chemical dosing, sampling, and corrective actions for chilled-water, condenser-water, and liquid-cooling systems where applicable.</li><li>Support WTP, STP, plumbing, drainage, and mechanical fire-protection systems where included within the data center operational scope.</li><li>Coordinate with electrical, BMS, IT, operations, HSE, vendors, and management teams during planned maintenance, incidents, testing, and emergency situations.</li><li>Maintain accurate mechanical documentation, asset records, maintenance reports, operating procedures, equipment histories, incident reports, testing records, and technical drawings.</li><li>Act as the mechanical technical authority during cooling incidents and operational escalations on a 24/7 on-call basis.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Engineer Level</li><li>Bachelor's degree in Mechanical Engineering.</li><li>Minimum of 5 years of mechanical, HVAC, cooling-plant, or critical-facility operations and maintenance experience.</li><li>At least 2 years of experience in a data center or another critical facility where loss of cooling could affect essential operations.</li><li>Demonstrated engineering-level experience with chilled-water systems, precision cooling, or critical HVAC systems.</li><li>Practical knowledge of chillers, pumps, cooling towers, heat exchangers, CRAH units, CRAC units, AHUs, valves, actuators, VFDs, and mechanical controls.</li><li>Experience in managing cooling redundancy, equipment capacity, environmental conditions, and critical maintenance activities in a live operational environment.</li><li>Demonstrated ownership of mechanical maintenance planning, technical procedure writing, incident response, vendor management, and spare-parts planning.</li><li>Experience preparing or approving SOPs, MOPs, EOPs, risk assessments, isolation plans, and maintenance procedures.</li><li>Ability to read and interpret P&amp;IDs, mechanical drawings, equipment schematics, sequence-of-operation documents, control diagrams, and OEM technical manuals.</li><li>Working knowledge of BMS or BAS platforms, mechanical alarms, equipment trends, sensors, control sequences, and environmental monitoring.</li><li>Good understanding of chilled-water temperatures, flow, pressure, differential pressure, delta-T, heat transfer, airflow, humidity, and cooling-capacity principles.</li><li>Experience with root cause analysis, corrective-action planning, and technical incident reporting.</li><li>Familiarity with testing, commissioning, integrated systems testing, and mechanical-system operational-readiness activities.</li><li>Fluent written and spoken English with strong technical reporting and communication skills.</li></ul><p>Other Requirements</p><ul><li>The role is fully on-site within an operational data center environment.</li><li>Availability for 24/7 on-call support is required.</li><li>The employee must be available to support planned shutdowns, emergency maintenance, testing activities, shift coverage, weekends, nights, and public holidays when operationally required.</li><li>The employee must comply with all company, client, data center, HSE, Permit to Work, LOTO, security, and access-control requirements.</li><li>The employee must be able to coordinate effectively with technicians, contractors, OEM vendors, operations teams, IT teams, and other engineering disciplines.</li></ul>