Embedded Systems Engineer Jobs in Kuwait

<p><h4>Description</h4> <p>The role in brief:<br> You'll be responsible to help support your employer's computer systems by installing, designing, and protecting them. This includes working on local area networks, network segments, Internet systems, and wide area networks.</p> <h4>Your responsibilities</h4> <ul> <li>Implementation and the high level of performance tuning and recovery procedures for mission critical enterprise systems.</li> <li>Serve as a technical expert in the area of system administration for complex operating systems. Investigate and analyze feasibility of system requirements and develop system specifications. Identify methods and solutions.</li> <li>Installation, configuration, and upgrading of servers and related hardware and software in a LAN, WAN, and stand-alone environment.</li> <li>Investigation, diagnostic testing, troubleshooting, and repair/resolution of system, hardware, software, and infrastructure.</li> </ul> <h4>Requirements</h4> <h4>Your qualification</h4> <ul> <li>Minimum 4 to 6 years of experience in a similar environment.</li> <li>Candidate should possess at least a Bachelor of Science or Bachelor of Computer Application.</li> <li>MCSE/MCSA certification and application-level certification related to Exchange and Storage will be an added advantage.</li> <li>Should be fluent in English; Arabic is an added advantage.</li> <li>Must have good communication skills, both verbal and oral, and be a self-starter.</li> </ul> <h4>Your proficiencies</h4> <ul> <li>Knowledge in network hardware infrastructure, diagnosis, and troubleshooting abilities.</li> <li>Fluent in English; Arabic would be an added advantage.</li> <li>Capacity to deal with complex problems with ability to demonstrate good judgment and decision making.</li> <li>Good communication skills.</li> <li>Able to work in a fast-paced environment, motivated and a team player with team management, business, and organization understanding.</li> <li>Organized, highly motivated, and goal-oriented.</li> <li>Adaptive to sudden schedule changes.</li> <li>Able to work well within teams.</li> </ul></p><p></p>

<p><h4>Faculty position at the American University of Kuwait (AUK)</h4> <p>The Department of Information Systems invites applications for rank assistant or associate professor; only applicants with Ph.D. in information systems will be considered for this position. Applications from recent graduates in the IS field are strongly encouraged. The successful candidate will teach a range of undergraduate courses. A commitment to enhancing undergraduate research opportunities for students is desirable. Faculty duties include teaching, research, student advising, and service to the college and university. The information systems program taught at AUK is CIS, not MIS. Knowledge of ABET program accreditation and curriculum development as well as assessment is highly desirable.</p> <p>The American University of Kuwait (AUK) is an independent, private, equal opportunity, and coeducational liberal arts institution of higher education. The educational, cultural, and administrative structure, methods, and standards of AUK are based on the American model of higher learning. The language of instruction is English.</p> <p>The American University of Kuwait is a liberal arts institution dedicated to teaching, learning, and scholarship. The university offers programs that provide students with the knowledge and skills necessary for lifelong learning and professional success. AUK enriches society by fostering an environment that encourages critical thinking, effective communication, personal growth, service, and leadership.</p> <p>AUK aspires to be a leading university recognized locally, regionally, and internationally for its institutional distinctiveness, academic excellence, and the accomplishments of its graduates.</p> <h4>Qualifications</h4> <p>Ph.D. in information systems is required. Knowledge of ABET program accreditation and curriculum development as well as assessment is highly desirable.</p> <h4>How to apply</h4> <p>Applications are accepted through the university's career portal.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Key Responsibilities</b></p><p><br></p><ul><li>Plan, supervise, and coordinate HVAC preventive, corrective, and emergency maintenance activities.</li><li>Manage day-to-day maintenance operations and ensure timely completion of work orders.</li><li>Lead and supervise HVAC technicians and subcontractors to ensure quality work and compliance with safety standards.</li><li>Monitor the performance of HVAC systems, including chillers, AHUs, FCUs, pumps, ventilation, and associated equipment.</li><li>Conduct site inspections and identify maintenance requirements and improvement opportunities.</li><li>Prepare maintenance schedules, manpower plans, and material requirements.</li><li>Coordinate with clients, consultants, and internal departments to ensure smooth project execution and client satisfaction.</li><li>Review technical drawings, specifications, and maintenance procedures.</li><li>Ensure compliance with contract requirements, company policies, and HSE regulations.</li><li>Monitor project progress, productivity, and maintenance costs, and recommend corrective actions when required.</li><li>Prepare technical reports, maintenance records, monthly progress reports, and client documentation.</li><li>Support troubleshooting, root cause analysis, and implementation of corrective actions for recurring equipment issues.</li><li>Ensure the availability of spare parts, tools, and consumables required for maintenance activities.</li><li>Participate in client meetings and provide technical support when required.</li><li>Ensure all maintenance activities are completed in accordance with industry standards and best engineering practices.</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Requirements:</b></p><ul><li>Bachelor’s degree in mechanical engineering.</li><li>Minimum <b>15 years of experience</b> in HVAC Maintenance Projects in Kuwait or the GCC.</li><li>Hands-on experience in preventive, corrective, and breakdown maintenance of HVAC systems.</li><li>Strong technical knowledge of <b>Chillers, AHUs, FCUs, Package Units, DX Systems, Ventilation Systems, Pumps, and HVAC Controls</b>.</li><li>Proven ability to manage maintenance teams, subcontractors, client coordination, and maintenance planning.</li><li>Experience with <b>CMMS (Computerized Maintenance Management System)</b> and maintenance reporting is an added advantage.</li><li>Valid Kuwait Driving License is preferred.</li></ul><p><br></p></div>

<ul><li><p>Install, configure, and maintain Audio Visual systems</p></li><li><p>Install projectors, screens, speakers, displays, and AV equipment</p></li><li><p>Perform structured cabling and cable termination</p></li><li><p>Install and troubleshoot low-voltage systems</p></li><li><p>Conduct testing, commissioning, and troubleshooting</p></li><li><p>Read and understand wiring diagrams and technical drawings</p></li><li><p>Coordinate with project teams during site installations</p></li><li><p>Ensure quality, safety, and professional installation standards</p></li><li><p>Diploma / ITI / Technical qualification preferred</p></li><li><p>Experience in AV and Low Voltage installation</p></li><li><p>Knowledge of AV equipment, cabling, and basic networking</p></li><li><p>Ability to troubleshoot technical issues</p></li><li><p>Good communication and teamwork skills</p></li><li><p>Kuwait driving license is an advantage</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>The Audio Visual & Low Voltage Technician is responsible for the installation, configuration, testing, commissioning, troubleshooting, and maintenance of Audio Visual and Low Voltage systems at residential, commercial, and project sites. The technician will ensure that all installations are completed safely, professionally, and according to project requirements.</p>

<ul><li><p>Install, configure, and maintain Audio Visual systems</p></li><li><p>Install projectors, screens, speakers, displays, and AV equipment</p></li><li><p>Perform structured cabling and cable termination</p></li><li><p>Install and troubleshoot low-voltage systems</p></li><li><p>Conduct testing, commissioning, and troubleshooting</p></li><li><p>Read and understand wiring diagrams and technical drawings</p></li><li><p>Coordinate with project teams during site installations</p></li><li><p>Ensure quality, safety, and professional installation standards</p></li><li><p>Diploma / ITI / Technical qualification preferred</p></li><li><p>Experience in AV and Low Voltage installation</p></li><li><p>Knowledge of AV equipment, cabling, and basic networking</p></li><li><p>Ability to troubleshoot technical issues</p></li><li><p>Good communication and teamwork skills</p></li><li><p>Kuwait driving license is an advantage</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>The Audio Visual & Low Voltage Technician is responsible for the installation, configuration, testing, commissioning, troubleshooting, and maintenance of Audio Visual and Low Voltage systems at residential, commercial, and project sites. The technician will ensure that all installations are completed safely, professionally, and according to project requirements.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Audio Visual &amp; Low Voltage Technician is responsible for the installation, configuration, testing, commissioning, troubleshooting, and maintenance of Audio Visual and Low Voltage systems at residential, commercial, and project sites. The technician will ensure that all installations are completed safely, professionally, and according to project requirements.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Install, configure, and maintain Audio Visual systems</li><li>Install projectors, screens, speakers, displays, and AV equipment</li><li>Perform structured cabling and cable termination</li><li>Install and troubleshoot low-voltage systems</li><li>Conduct testing, commissioning, and troubleshooting</li><li>Read and understand wiring diagrams and technical drawings</li><li>Coordinate with project teams during site installations</li><li>Ensure quality, safety, and professional installation standards</li><li>Diploma / ITI / Technical qualification preferred</li><li>Experience in AV and Low Voltage installation</li><li>Knowledge of AV equipment, cabling, and basic networking</li><li>Ability to troubleshoot technical issues</li><li>Good communication and teamwork skills</li><li>Kuwait driving license is an advantage</li></ul></div>

<p><h4>Picture yourself brightening someone’s day.</h4> <p>When you join our hotels team, that’s exactly what you’ll do every time you come to work! As a maintenance team leader, you’re not just overseeing daily operations of the physical building and systems maintenance and repairs – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.</p> <h4>Here's what you'll do during a typical day:</h4> <ul> <li><strong>Supervise and develop the team:</strong> Train, schedule, and supervise maintenance team members, providing guidance and support to ensure high-quality work and performance.</li> <li><strong>Ensure facility safety and compliance:</strong> Support maintenance of the physical building, mechanical systems, electrical systems, HVAC, and life safety systems, ensuring compliance with local and national regulations.</li> <li><strong>Supervise maintenance operations:</strong> Assign and oversee daily maintenance tasks, ensuring thorough documentation of work in the property management system.</li> <li><strong>Oversee contractor work:</strong> Supervise external contractors and inspect completed work for quality and compliance.</li> <li><strong>Respond to service requests:</strong> Ensure that maintenance requests, guest concerns, and emergency situations are addressed promptly and efficiently.</li> <li><strong>Maintain fixtures and fittings:</strong> Conduct scheduled and ad hoc maintenance, including planned preventive maintenance (PPM) and service requests, to ensure hotel fixtures and fittings remain in safe condition.</li> </ul> <h4>What it takes to make the stay</h4> <p>At Hilton, our core values define what it takes to succeed here and guide the qualities we look for in every team member:</p> <ul> <li>A passion for spreading the light and warmth of hospitality.</li> <li>Acting with integrity and always doing the right thing.</li> <li>Inspiring others through leadership.</li> <li>A belief that teamwork drives the best outcomes.</li> <li>A sense of ownership and accountability.</li> <li>A focus on the now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Accurately input and update data in various databases and systems, ensuring high levels of precision to maintain data integrity.</li><li>Review and verify data for accuracy and completeness, identifying discrepancies and correcting errors promptly to uphold quality standards.</li><li>Organize and maintain physical and digital filing systems, enabling easy access to important information and documents.</li><li>Generate and distribute timely reports based on data analysis, providing insights that aid decision-making processes.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required; an associate degree in a related field is preferred to enhance data management skills.</li><li>Minimum of 1-2 years of relevant experience in data entry or administrative roles, demonstrating a strong understanding of data processes.</li><li>Proficiency in Microsoft Office Suite, particularly Excel, to efficiently manage and analyze data sets.</li><li>Experience with data entry software and database management systems, showcasing technical aptitude in utilizing various platforms.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Accurately input and update data in various databases and systems, ensuring high levels of precision to maintain data integrity.</li><li>Review and verify data for accuracy and completeness, identifying discrepancies and correcting errors promptly to uphold quality standards.</li><li>Organize and maintain physical and digital filing systems, enabling easy access to important information and documents.</li><li>Generate and distribute timely reports based on data analysis, providing insights that aid decision-making processes.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required; an associate degree in a related field is preferred to enhance data management skills.</li><li>Minimum of 1-2 years of relevant experience in data entry or administrative roles, demonstrating a strong understanding of data processes.</li><li>Proficiency in Microsoft Office Suite, particularly Excel, to efficiently manage and analyze data sets.</li><li>Experience with data entry software and database management systems, showcasing technical aptitude in utilizing various platforms.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview **This position will be physically located in Kuwait** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Inventory Control &amp; BII Specialist is responsible for maintaining 100% physical accountability of all Basic Issue Items (BII) and Components of End Item (COEI) across APS-5 equipment sets. This position ensures vehicle gear layouts match the exact property book and authorized technical manual requirements. The role also validates tactical digital communications systems, including SINCGARS/Harris radios, JCR, and BFT, and performs diagnostics using TMDE to isolate electronic node faults to the Line Replaceable Unit (LRU) level. The specialist ensures APS-5 equipment readiness, accuracy of component listings, and compliance with Army regulations and APS-5 SOPs. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Perform full, partial, and cyclic inventories of BII, COEI, and AAL components for all APS-5 equipment. + Responsible for 100% physical component count of all BII/COEI items. + Ensure vehicle gear layouts match the exact authorized property book configuration and technical manual (TM) layout. + Identify missing, damaged, incorrect, or substituted BII/COEI items and record all discrepancies. + Maintain accurate inventory records within AWRDS, GCSS-Army, DPAS, and component tracking systems. + Prepare shortage annexes, discrepancy worksheets, and reconciliation documentation. + Ensure BII/COEI items are properly labeled, packaged, stored, and secured according to TMs and APS-5 SOPs. + Support equipment issue, turn-in, and reset operations with complete BII/COEI validation. + This position does not inspect engines, driveline systems, hydraulics, or vehicle mechanical readiness. + Responsibilities focus solely on BII/COEI component accuracy, layout validation, and tactical digital systems. + Validate vehicle-integrated tactical communications systems including SINCGARS/Harris radios, Joint Capabilities Release (JCR), and Blue Force Tracker (BFT). + Perform functional checks on digital data buses, interface modules, and communication harnesses. + Use TMDE to isolate faults in electronic nodes, data harnesses, and interface kits. + Identify faults down to the Line Replaceable Unit (LRU) level. + Ensure all tactical systems are installed/configured according to technical manuals and APS-5 configuration control standards. + Maintain audit-ready logs of all diagnostics, validations, and corrective actions. + Coordinate with Maintenance, Communication Shop, and Materiel Management for LRU replacements or system corrections. + Maintain audit-ready documentation for inventories, tactical system checks, and reconciliation actions. + Generate daily, weekly, and monthly inventory and tactical system status reports. + Ensure compliance with APS-5 SOPs, Army regulations, and government contractual requirements. + This job description is not intended to be all-inclusive. Management may assign additional duties to support APS-5 mission requirements. Qualifications + Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + High school diploma or equivalent; associate degree preferred. + Must be able to obtain a Host Country Driver's License + Must be CAC eligible and/or the ability to obtain a CAC + Experience: + APS-5 experience in inventory, BII/COEI management, or Army supply operations. + Familiarity with SINCGARS/Harris/JCR/BFT systems and basic TMDE diagnostics. + Proficiency with AWRDS, GCSS-Army, DPAS, and technical manual interpretation. + Environmental Regulations, including Federal OSHA and EPA regulations. + Military background and training beneficial. + Skills: + Ability to instruct small and medium groups of people, Competent in computer operations to include Microsoft Office; Outlook, Word, Excel, and PowerPoint. + Must have a strong ability to work independently. + Strong analytical skills, attention to detail, and organizational abilities. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</p> </div>

<p>Perform installation, commissioning, maintenance, and repair activities for GIS equipment, including circuit breakers, disconnectors, and earthing switches. Conduct routine inspections, diagnostic testing, and preventive maintenance on GIS systems to identify and address potential issues. Troubleshoot complex GIS malfunctions, determine root causes, and implement effective corrective actions. Develop and execute maintenance procedures and schedules in accordance with manufacturer specifications and industry best practices. Share technical knowledge and provide guidance to technicians and engineers on GIS operation and maintenance. Collaborate with engineering and project teams on GIS design reviews, upgrades, retrofits, and modifications. Maintain accurate records of maintenance activities, repairs, testing results, and equipment performance data. Ensure compliance with all applicable health, safety, environmental, quality, and regulatory requirements during GIS operations and maintenance activities. Prepare technical reports, service documentation, and recommendations related to GIS performance and reliability. Support emergency response activities and provide timely assistance during critical equipment failures, as required. You will be responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy s core values safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Electrical Engineering, Power Systems Engineering, or a related field. Minimum of 7 years of experience working with Gas Insulated Switchgear (GIS) systems. Strong knowledge of GIS components, operating principles, and common failure modes. Proven experience in GIS installation, commissioning, maintenance, and troubleshooting activities. Familiarity with applicable international and national electrical safety standards and regulations. Ability to read and interpret electrical schematics, single-line diagrams, and technical drawings. Strong analytical and problem-solving skills, with the ability to diagnose and resolve complex electrical issues. Excellent communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams and customers. Ability to work independently, prioritize responsibilities, and manage multiple tasks simultaneously. Valid driver's license and willingness to travel to project sites as required. Experience with Hitachi Energy GIS products and systems is considered a strong advantage</p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul> <h4>Compensation details</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p>Facilities &amp; Building Maintenance Management Hotel Experience Mandatory HVAC, MEP systems Electrical, Plumbing Fire safety systems BMS Preventive maintenance Salary: KWD 350 to 450 Free Accom Work VISA&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary <br></span><p><span>To act as a domain-driven IT partner supporting&nbsp;Consumer Credit, Finance, Accounting, and Automation systems, ensuring&nbsp;regulatory compliance, financial accuracy, operational efficiency, and&nbsp;digital transformation&nbsp;across the consumer lending lifecycle, while supporting&nbsp;Agile and hybrid delivery models.</span></p><br><br><br>Job Responsibilities <br><ul> <li><span>Translate&nbsp;consumer credit and finance requirements&nbsp;into functional and technical system specifications</span></li> <li><span>Support&nbsp;Agile / hybrid project delivery&nbsp;by converting business requirements into&nbsp;epics, user stories, and acceptance criteria, while maintaining formal BRD/FSD documentation</span></li> <li><span>Support end-to-end&nbsp;consumer lending lifecycle: origination, disbursement, servicing, collections, write-offs, and closure</span></li> <li><span>Ensure accurate&nbsp;interest computation, amortization, fees, penalties, and GL postings</span></li> <li><span>Integrate lending platforms with&nbsp;core finance systems, payment gateways, and regulatory reporting tools</span></li> <li><span>Support&nbsp;IFRS-9 / Expected Credit Loss (ECL)&nbsp;logic, provisioning, and financial reconciliations</span></li> <li><span>Lead or support&nbsp;automation initiatives&nbsp;(RPA, workflows, exception handling, reconciliations)</span></li> <li><span>Ensure compliance with&nbsp;CBK / GCC Central Bank regulations, audit requirements, and internal controls</span></li> <li><span>Participate in&nbsp;sprint planning, UAT, production releases, incident resolution, and audit queries</span></li> </ul><br><br>Candidate Requirements <br><ul> <li><span>Bachelor’s degree in one of the following:&nbsp;</span><span>Computer Science / Information Technology /</span><span>Finance / Accounting /</span><span>Business Administration</span></li> <li><span>5–10 years&nbsp;as an IT / Business Systems Analyst</span></li> <li><span>Mandatory experience in&nbsp;Consumer Credit / Retail Lending&nbsp;and&nbsp;Finance &amp; Accounting systems</span></li> <li><span>Experience working with&nbsp;Loan Management Systems (LMS),&nbsp;Core Banking / Credit Platforms, and&nbsp;ERPs</span></li> <li><span>Exposure to&nbsp;Agile or hybrid project delivery environment</span></li> </ul><br><br><br> </div>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-I (UH-60) troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.<br> Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent required.</li> <li>A valid up-to-date FAA A&P certificate is preferred.</li> <li>If no FAA A&P certificate, candidate must have three (3) years aviation maintenance experience, with a minimum of two (2) years on the assigned UH-60 mission design series (MDS).</li> <li>All experience must be within the six (6) most recent years.</li> <li>Must be in possession of a U.S. passport with a minimum of two plus years validity and be able to travel internationally.</li> <li>Must be able to obtain and maintain facility public trust NAC-I. Note: US citizenship is required for facility public trust NAC-I at this work location.</li> <li>Must be able to pass the CENTCOM medical requirement to deploy.</li> <li>Must be able to obtain Kuwait visa.</li> </ul> <h4>Knowledge and skills</h4> <ul> <li>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li> <li>Basic knowledge of aircraft sheet metal and structural modifications and repair.</li> <li>General knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements and working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Role Summary :</b>The QHSE Officer is responsible for ensuring compliance with Quality, Health, Safety, and Environmental (QHSE) standards while maintaining Food Safety Management Systems in a water, juice, dairy, or food manufacturing environment. The role ensures product quality, regulatory compliance, workplace safety, and continuous improvement.</p><p><b>Key Responsibilities:</b></p><ul><li>Implement and maintain Quality, Food Safety, Health, Safety, and Environmental Management Systems. </li><li>Ensure compliance with HACCP, GMP, FSSC 22000, ISO standards, GSO, NSF, and local regulatory requirements. </li><li>Conduct GMP, HACCP, internal, customer, and certification audits. </li><li>Monitor product quality, food safety, sanitation, environmental, and workplace safety practices. </li><li>Conduct risk assessments, incident investigations, emergency drills, and implement corrective and preventive actions (CAPA). </li><li>Lead employee training and awareness programs on QHSE policies and food safety. </li><li>Prepare QHSE reports, monitor KPIs, and support continuous improvement initiatives.&nbsp;</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications</b></p><ul><li>Degree or Diploma in Safety, Environmental Science, Food Science, or a related field. </li><li>Professional certifications in Occupational Health &amp; Safety (NEBOSH, IOSH, OSHA, or equivalent) are preferred. </li></ul><p><b>Experience</b></p><ul><li><b>Minimum 5 years</b> of QHSE experience in <b>water, juice, dairy, beverage, or food manufacturing</b>. </li><li>Strong knowledge of <b>ISO 9001, ISO 14001, ISO 45001, FSSC 22000, HACCP, GMP, NSF, and GSO standards</b>. </li><li>Experience in food safety systems, internal audits, emergency response, fire safety, sanitation, and regulatory compliance.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a Software Developer to help integrate our new core systems with various business areas, including Enterprise Services, Retail, Corporate, and BCAP. You will work with Java and related technologies in an Agile environment.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul> <li>Develop and maintain integrations for new core systems.</li> <li>Build REST APIs and microservices using Java and Spring Boot.</li> <li>Work in Agile teams to deliver high-quality software.</li> <li>Use pair programming, continuous integration, and test-driven development practices.</li> <li>Write and run unit and performance tests.</li> <li>Document your code and designs.</li> <li>Troubleshoot and fix integration and performance issues.</li> </ul> </div>

<p>Facilities &amp; Building Maintenance Management Hotel Experience Mandatory HVAC, MEP systems Electrical, Plumbing Fire safety systems BMS Preventive maintenance Salary: KWD 350 to 450 Free Accom Work VISA Online Interview WhatsApp: +9PHONE_NUMBER</p><p><strong>Desired Candidate Profile</strong></p><p>Facilities &amp; Property Maintenance Manager experience in Hotel Industry</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Al Jazeera Real Estate Development Co. K.S.C.C (AJRE) founded in 2002, is a closed shareholding Company has an impressive 22-years of track record providing high-quality developments such as Sahara Kuwait Golf Resort, Murouj Mall &amp; Sahara Equestrian Resort.</p><br><p>AJRE continues to develop its business by expanding into related business lines and offering new products and services. AJRE is committed to the pursuit of excellence and will continue evaluating ways to strengthen policies and practices to promote the interests of shareholders, partners, and employees.</p><br><br>Job Description<br><p>Sahara Arena is seeking a Technical Assistant to support the Operations Manager in the daily technical operation and maintenance of the venue. The successful candidate will help ensure the arena is safe, event-ready, and operating efficiently by coordinating maintenance activities, reviewing technical event requirements, and providing technical support before, during, and after events – to a standard consistent with comparable local and regional arenas.</p><br><br>Qualifications<br><ul><li>Diploma or Bachelor’s degree in Engineering (Mechanical, Electrical, or related) or a related technical field.</li><li>2+ years’ experience in arenas, theatres, exhibition halls, stadiums, or live event production preferred.</li><li>Strong working knowledge of entertainment rigging, trusses, chain hoists/motors (including large-capacity grids), AV systems, professional sound and lighting, LED screens, and electrical power distribution/generators.</li><li>Ability to read and interpret technical drawings, rigging plans, load calculations, and event layouts.</li><li>Recognized rigging/safety certification (e.g., ETCP Rigger, IRATA, or equivalent), or willingness to obtain one, is an advantage.</li><li>Familiarity with CMMS or maintenance-tracking software for PPM and asset management.</li><li>Proficiency in Microsoft Office; AutoCAD or Vectorworks knowledge is a strong advantage.</li><li>Strong communication, organizational, and problem-solving skills, with the ability to stay calm under the time pressure of live event load-in/load-out.</li><li>Willingness to work flexible hours – including evenings, weekends, and public holidays – based on event schedules, and to provide on-call standby coverage during live shows.</li></ul><br>Additional Information<br><p><strong>Venue Operations &amp; Preventive Maintenance</strong></p><br><ul><li>Assist in the daily technical operation of the arena, including mechanical, electrical, fire/life-safety, rigging and AV systems.</li><li>Perform routine inspections and Preventive Planned Maintenance (PPM), logging all activity in the venue’s CMMS or maintenance-tracking system.</li><li>Coordinate maintenance team and supervise contractors and specialist vendors, verifying completed work meets venue and manufacturer standards.</li><li>Maintain accurate maintenance records, asset registers, and technical documentation (as-built drawings, rigging certificates, equipment manuals).</li><li>Ensure all building systems and event infrastructure – including the rigging grid up to its full rated capacity, power distribution, HVAC, and LED/AV systems – operate safely and efficiently.</li></ul><p><strong>Event Technical Support</strong></p><br><ul><li>Attend technical meetings and advance calls with event organizers, touring production teams, and contractors.</li><li>Review and validate incoming technical riders, stage plots, and rigging plans against venue capacities before approving load-ins.</li><li>Provide hands-on technical support during event setup, rehearsals, live events, and dismantling, including standby coverage for live shows.</li></ul><p><strong>Pre- &amp; Post-Event Responsibilities</strong></p><br><ul><li>Before each event: review technical submissions, verify rigging and roof/grid loads against certified limits, inspect hoists, trusses, chain motors, power distribution boards/generators and AV systems, and confirm the arena is fully event-ready.</li><li>After each event: inspect the venue and equipment for damage or faults, document maintenance requirements, coordinate necessary repairs with contractors, and ensure the arena is restored and ready for the next event.</li></ul><p><strong>Health, Safety &amp; Compliance</strong></p><br><ul><li>Support compliance with Kuwait Civil Defence, fire/life-safety, and recognized international rigging and entertainment-industry safety standards.</li></ul><br><br> </div>

<p><h4>Description</h4> <p>Apt Resources is seeking a skilled borewell technician to join our client's agriculture farm in Abu Dhabi, UAE. In this role, you will be responsible for the installation, maintenance, and repair of borewell systems that supply water for irrigation and farm operations. Your expertise will ensure that the farm has a reliable water source, vital for crop growth and sustainability.</p> <p>The ideal candidate will possess a strong understanding of borewell operations, troubleshooting skills, and the ability to work independently. You will collaborate closely with the farm management team to ensure efficient water management and support agricultural productivity.</p> <h4>Responsibilities</h4> <ul> <li>Install and maintain borewell systems, ensuring efficient operation and water supply.</li> <li>Conduct regular inspections and troubleshooting of borewell installations.</li> <li>Repair any malfunctions and perform routine maintenance on borewell equipment.</li> <li>Ensure compliance with agricultural water management policies and safety regulations.</li> <li>Collaborate with farm staff to optimize water usage effectively.</li> <li>Keep accurate records of maintenance activities and repairs performed.</li> </ul> <h4>Requirements</h4> <ul> <li>Proven experience as a borewell technician or similar role in agriculture.</li> <li>Strong knowledge of borewell systems, installation, and maintenance.</li> <li>Ability to troubleshoot technical issues and perform repairs.</li> <li>Excellent problem-solving skills and attention to detail.</li> <li>Ability to work independently and as part of a team.</li> <li>Good physical stamina and the capability to work in outdoor conditions.</li> </ul> <h4>Benefits</h4> <p><strong>Salary:</strong> AED 2,500 - AED 3,000 plus accommodation and food provided.</p></p><p></p>