وظائف مهندس تصميم ميكانيكي في الكويت

<p>An auto mechanic technician inspects, maintains, and repairs cars, trucks, and other vehicles.</p><p>Their core duties involve using computerized diagnostic tools to find mechanical or electrical problems, performing routine tune-ups or oil changes, and replacing worn-out or broken parts to keep vehicles safe and efficient on the road.</p><p>&nbsp;</p><p><strong>Job Summary</strong></p><p>An automotive service technician ensures vehicle safety and performance by identifying malfunctions, executing precise repairs, and communicating repair needs clearly to customers or service advisors</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><p>• Diagnostics: Use electronic scanners and diagnostic equipment to read error codes and pinpoint engine, transmission, or electrical issues.</p><p>• Routine Maintenance: Change motor oil, rotate tires, check fluid levels, replace brake pads, and service batteries.</p><p>• Repairs &amp; Replacements: Fix or swap out defective parts like alternators, sensors, belts, and suspension components.</p><p>• Testing: Test drive vehicles or use specialized shop equipment to verify that systems operate properly after service.</p><p>• Documentation: Record all completed services, parts utilized, and labor hours accurately<br>&nbsp;</p><p ><span lang="ar" dir="rtl">يتولى <strong>فني ميكانيكا السيارات</strong> مهام فحص وصيانة وإصلاح السيارات والشاحنات والمركبات الأخرى.</span></p><p ><span lang="ar" dir="rtl">وتتمثل مهامه الأساسية في استخدام أدوات التشخيص المحوسبة للكشف عن الأعطال الميكانيكية أو الكهربائية، وإجراء عمليات الضبط الدوري أو تغيير الزيت، واستبدال الأجزاء التالفة أو المكسورة لضمان سلامة المركبات وكفاءة أدائها على الطريق.</span></p><h3 ><span lang="ar" dir="rtl">مهام الوظيفة</span></h3><p ><span lang="ar" dir="rtl">يعمل <strong>فني خدمة السيارات</strong> على ضمان سلامة المركبات وكفاءة أدائها من خلال تحديد الأعطال، وإجراء الإصلاحات الدقيقة، وتوضيح احتياجات الإصلاح للعملاء أو مستشاري الخدمة.</span></p><h3 ><span lang="ar" dir="rtl">المسؤوليات الرئيسية</span></h3><ul><li><p ><span lang="ar" dir="rtl"><strong>التشخيص:</strong> استخدام أجهزة المسح الإلكتروني ومعدات التشخيص لقراءة رموز الخطأ وتحديد المشكلات المتعلقة بالمحرك أو ناقل الحركة أو الأنظمة الكهربائية بدقة.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الصيانة الدورية:</strong> تغيير زيت المحرك، وتبديل أماكن الإطارات (تدويرها)، وفحص مستويات السوائل، واستبدال وسادات المكابح، وصيانة البطاريات.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الإصلاح والاستبدال:</strong> إصلاح أو استبدال الأجزاء المعطلة مثل المولدات (الدينامو)، والمستشعرات، والأحزمة، ومكونات نظام التعليق.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الاختبار:</strong> قيادة المركبات تجريبياً أو استخدام معدات الورشة المتخصصة للتحقق من عمل الأنظمة بشكل سليم بعد إجراء الخدمة.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>التوثيق:</strong> تسجيل كافة الخدمات المنجزة، وقطع الغيار المستخدمة، وساعات العمل بدقة.</span></p></li></ul>

<p>HVAC engineer wanted, experience in executing projects in the State of Kuwait, a Kuwaiti driver's license, and a transferable residence permit are required. Send your CV to the email address. / Email</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including mechanical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform mechanical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for mechanical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, PDMS, Smart Plant, CAESAR II, PV Elite or similar).</p></li><li><p>Strong understanding of mechanical systems, codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 10years of experience in mechanical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based / Transferable Visa</p></li></ul><p><br></p><p></p></section>

<p><h4>Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead HSE Engineer to support HSE function on PMC Project with Kuwait Oil Company in Kuwait.</p> <h4>Summary section</h4> <p>The Lead HSE engineer will coordinate implementation of the KOC PMC Safety policies, HSE Management System and project specific HSE Management Plans as they apply to the project.<br> He will ensure that the site complies with the relevant HSE legislation and KOC HSE requirements.<br> He will develop and implement the project HSE MS.<br> He will develop and maintain statistical data for the project and prepare reports as required for the KBR KOC PMC HSEQ Manager.</p> <h4>Mandatory qualifications including required education, experience, & skills:</h4> <ul> <li>Bachelor degree in engineering</li> <li>Minimum 12 years total post-graduation experience</li> <li>Minimum 8 years oil & gas post-graduation experience</li> <li>Minimum 5 years’ experience in a Lead HSE Engineer role</li> <li>Practical experience of design, construction, commissioning and maintenance aspects of oil/gas installations</li> <li>Practical experience with HSE management systems, reporting and audit procedures</li> <li>Excellent written coordination and verbal communication skills</li> <li>Ability to develop, update and maintain in-house procedures</li> <li>Must be conversant with local and international safety standards and norms</li> <li>Must possess two or more HSE certifications (certified courses) in General Industrial Safety, Construction Safety, Environmental Management, Industrial Hygiene, ISO 14001 / OHSAS 18001 Lead Auditor, NEBOSH, ICertOSH, ASSE Certificate in Global Safety Management or equivalent courses</li> </ul> <h4>Responsibilities:</h4> <ul> <li>Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment</li> <li>Ensure the EPC contractors develop, implement and maintain a specific project Risk Management Plan</li> <li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations</li> <li>Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements</li> <li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action</li> <li>Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/additions to requirements as they come into effect</li> <li>Review EPC contractor Safety Management System and advise of required changes</li> <li>Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractors to foster the professional image of KBR</li> <li>Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken</li> </ul> <p>Other key activities shall include but not be limited to the following:</p> <ul> <li>Pro-actively visit site and with the EPC contractor implement safety measures - promote/ensure safe work practices</li> <li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings</li> <li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained</li> <li>Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmes</li> <li>Maintain a HS&E audit and assessment program for the location</li> <li>Carry out regular inspections of the work areas with the respective EPC contractor line manager and/or HSE representative and prepare reports</li> <li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc.</li> <li>Assist EPC contractor line management and/or construction supervisors in accident investigation process and report accordingly</li> <li>Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives</li> <li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors</li> <li>Monitor the availability and use of safety apparel and equipment</li> <li>Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training</li> <li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls</li> <li>Ensure all lines of communication on HSE matters remain open and effective between all parties particularly KOC, KBR, EPC contractors and their sub-contractors</li> </ul> <p>Decarbonization – Energy transition – Sustainability<br> Belong. Connect. Grow. with KBR!</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Surbana Jurong</b></p><br><p>Surbana Jurong Group (SJ) is a leading global urban, infrastructure, and engineering consulting firm headquartered in Singapore. Driven by a vision to build cities and shape lives, SJ delivers sustainable, innovative, and integrated solutions across the built environment. With a strong presence across Asia, the Middle East, and Africa, SJ provides multidisciplinary expertise in transport, ports, marine, water, energy, buildings, and large-scale infrastructure projects.</p><br><p>SJ partners with governments, multilateral development agencies, and private sector clients to plan, design, supervise, and manage complex infrastructure projects throughout their lifecycle. By combining global expertise with local knowledge, SJ delivers practical, high-impact solutions that enhance connectivity, strengthen communities, and support long-term sustainable development.</p><br><p><b>The role</b></p><br><p>We are seeking an experienced <b>Senior Mechanical Engineer </b>to support the delivery of major utility, water, and infrastructure projects. The successful candidate will provide technical oversight of mechanical construction, installation, testing, commissioning, and quality assurance activities, ensuring project objectives, technical specifications, and industry standards are consistently achieved.</p><br><ul><li>Provide technical supervision of mechanical installation and construction activities involving pumping systems, pipelines, process equipment, mechanical plant, and associated infrastructure.</li><li>Review mechanical designs, technical submissions, fabrication drawings, construction methodologies, and contractor documentation.</li><li>Monitor installation, testing, commissioning, and system performance verification activities to ensure compliance with project requirements and operational objectives.</li><li>Support inspection and acceptance testing processes for mechanical systems, equipment, and associated assets during manufacturing and site execution phases.</li><li>Oversee quality assurance and quality control activities to ensure mechanical works are delivered in accordance with applicable standards and specifications.</li><li>Coordinate closely with multidisciplinary engineering teams to support integrated system commissioning and successful project delivery.</li><li>Maintain inspection records, technical reports, commissioning documentation, and defect management registers.</li><li>Review project completion documentation, including as-built drawings and operation &amp; maintenance manuals, supporting efficient project handover.</li><li>Provide technical expertise for troubleshooting, risk mitigation, reliability improvement, and operational optimization initiatives.</li></ul><p>With a track record of achievement in a related role, you will have gained your experience in a consultancy environment and have a passion for building trusted relationships to drive positive change and win new work.</p><br><p>Suitable applicants will have/be:</p><br><ul><li>Bachelor's Degree in Mechanical Engineering or a related discipline.</li><li>Minimum 15 years' experience in mechanical engineering, construction supervision, or delivery of major utility, industrial, water, or infrastructure projects.</li><li>Demonstrated experience with pumping systems, pipelines, valves, surge protection systems, mechanical equipment, HVAC systems, and associated plant infrastructure.</li><li>Strong understanding of hydraulics, mechanical testing, commissioning, system performance verification, and reliability assessment practices.</li><li>Proven experience reviewing technical drawings, engineering documentation, inspections, equipment submittals, and contractor deliverables.</li><li>Experience coordinating multidisciplinary interfaces during construction and commissioning phases of complex projects.</li><li>Strong communication and technical reporting skills with excellent English language proficiency.</li><li>Professional registration, experience with large pumping facilities, surge or water-hammer analysis, major water infrastructure projects, commissioning of complex mechanical systems, or Arabic language capability would be advantageous.</li></ul><p>Surbana Jurong Group is an equal opportunity employer. We believe that diversity, equity, and inclusion strengthen our people, enrich our perspectives, and enable us to deliver better outcomes for our clients, partners, and the communities we serve.</p><br><p><b>How to apply </b></p><br><p>All applications must be submitted online and for a confidential discussion regarding this opportunity, please contact<b>&nbsp;Taimoor Tariq - </b><b>Taimoor.tariq@sjgroup.com</b></p><br><p>For further information about Surbana Jurong Group, please visit our website at www.surbanajurong.com.</p><br><p>To explore career opportunities and learn more about working with SJ Group, please visit our Careers page at SJ Careers.</p><br><p>All recruitment activities are managed by the Recruitment &amp; Talent team. At this stage, this position does not require agency support. Kindly do not forward resumes directly to SJ Group employees.</p><br><p>At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!</p><br> </div>

<p>We have Openings for Commissioning Engineer - Kuwait (KOC)</p><p><b>Qualification </b>: Dip or BE/B tech- Mechanical</p><p>Industry : Oil &amp; Gas</p><p>exp KOC Approved added advantage</p><p>Experience : Min 15+ years (10 years in Oil&amp;Gas)</p><p>Job Description : * Should have experience in EPC Companies Oil &amp; Gas refinery projects. Lead commissioning activities for refinery and oil &amp; gas projects from pre-commissioning to start-up. Develop and implement commissioning plans, procedures, and schedules. Coordinate with Engineering, Construction, QA/QC, Operations, and Vendors to ensure smooth commissioning. Verify mechanical completion and ensure systems are ready for commissioning. Supervise flushing, cleaning, pressure testing, loop checking, calibration, and functional testing. Lead equipment commissioning including pumps, compressors, tanks, piping, electrical, and instrumentation systems. Coordinate energization, system integration, and plant start-up activities.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Should have experience in EPC Companies Oil &amp; Gas refinery projects. Lead commissioning activities for refinery and oil &amp; gas projects from pre-commissioning to start-up. Develop and implement commissioning plans, procedures, and schedules. Coordinate with Engineering, Construction, QA/QC, Operations, and Vendors to ensure smooth commissioning. Verify mechanical completion and ensure systems are ready for commissioning. Supervise flushing, cleaning, pressure testing, loop checking, calibration, and functional testing. Lead equipment commissioning including pumps, compressors, tanks, piping, electrical, and instrumentation systems. Coordinate energization, system integration, and plant start-up activities.</p>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>An Associate's degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E.</li><li>OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li><li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li><li>I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li><li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li><li>Must have an Active Secret US Government Clearance.</li><li>US Citizenship is required to obtain a Secret Clearance.</li></ul>

Mechanic <br><br> Job Id :100193605<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Mechanic<br><br>We are looking for an experienced Mechanic with Strong knowledge of truck maintenance and repairs specializing in Mercedes and TATA trucks.<br><br>Interested candidates are requested to send their CV to: umc@umckuwait.com<br><br>Basic Details<br><br>Location : Kuwait City , Kuwait<br><br>Qualification<br><br>Posted : 1 month ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : umc@umckuwait.com

Mechanic <br><br> Job Id :100195404<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>URGENT REQUIREMENT FOR MECHANIC (DIESEL AND PETROL)<br><br>Inspect and repair engine, transmission, brake, suspension, steering, and cooling systems. Experience with heavy vehicles, trucks, buses, generators, or construction equipment is preferred Ability to diagnose mechanical, electrical, and hydraulic problems. Full Time Job Transferrable Visa ( Ahli Visa)<br><br>Experienced candidates pls send your CVs to hr@globalintl.com<br><br>Basic Details<br><br>Location : Ahmadi , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Jobboard subscription<br><br>Contact Info<br><br>Mobile : +965 98001878<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p>Job Purpose The Data Center Mechanical Engineer owns the mechanical and cooling infrastructure of the data center at engineering level, from the central cooling plant through to the data hall cooling environment. The role is responsible for mechanical maintenance strategy, system reliability, operational procedures, environmental performance, vendor management, safety compliance, spare-parts planning, and emergency response. The Mechanical Engineer directs the Mechanical Manning Technicians, authorizes equipment changeovers and critical maintenance activities, approves mechanical procedures, and acts as the mechanical technical authority during incidents and operational escalations.</p><p>Key Responsibilities and Areas of Ownership</p><ul><li>Take engineering ownership of the data center mechanical and cooling infrastructure, including chillers, cooling towers, chilled-water pumps, condenser-water pumps, heat exchangers, CRAH units, CRAC units, AHUs, ventilation systems, fans, filters, coils, valves, actuators, piping systems, and associated controls.</li><li>Manage the operation, reliability, and performance of chilled-water and precision-cooling systems serving the data halls and supporting areas.</li><li>Own mechanical equipment operating procedures, changeover procedures, start-up and shutdown sequences, and equipment rotation plans.</li><li>Authorize, lead, and supervise critical mechanical activities, including chiller changeovers, pump changeovers, cooling-tower changeovers, isolation activities, system draining, system filling, and restoration of equipment to service.</li><li>Monitor and maintain data hall environmental conditions, including temperature, humidity, airflow, differential pressure, cooling capacity, and equipment loading.</li><li>Review chilled-water supply and return temperatures, water flow, system pressure, differential pressure, valve positions, and system delta-T to identify performance issues and operational risks.</li><li>Manage cooling redundancy and capacity to ensure sufficient cooling remains available during maintenance, equipment failure, testing, or abnormal operating conditions.</li><li>Own the mechanical safety program, including Lockout/Tagout, Permit to Work, risk assessments, safe isolation, refrigerant safety, chemical-handling controls, and compliance with HSE requirements.</li><li>Develop and manage the annual mechanical Planned Preventive Maintenance program in accordance with OEM recommendations, equipment criticality, maintenance history, and operational requirements.</li><li>Prepare, review, approve, and maintain mechanical Standard Operating Procedures, Methods of Procedure, Emergency Operating Procedures, maintenance instructions, risk assessments, and equipment changeover procedures.</li><li>Ensure that all mechanical maintenance activities are planned around available cooling redundancy and executed without compromising data center availability.</li><li>Own vendor coordination for mechanical maintenance activities and supervise OEM major services, equipment overhauls, repairs, inspections, and specialist testing.</li><li>Review vendor method statements, risk assessments, service reports, test results, recommendations, and corrective-action requirements.</li><li>Manage critical spare-parts and inventory planning for chillers, pumps, cooling towers, CRAH and CRAC units, valves, actuators, sensors, filters, belts, bearings, motors, VFDs, and other mechanical systems.</li><li>Analyze cooling-system performance, equipment efficiency, energy consumption, operating trends, alarm history, temperature profiles, water-flow conditions, and equipment loading.</li><li>Identify and implement opportunities to improve cooling efficiency, airflow management, chilled-water performance, equipment sequencing, and overall energy performance without reducing system resilience.</li><li>Investigate mechanical faults, high-temperature conditions, leaks, abnormal vibration, low-flow conditions, low delta-T, equipment trips, control failures, and recurring alarms.</li><li>Lead root cause analysis for mechanical incidents and equipment failures and implement corrective and preventive actions.</li><li>Direct, develop, and train Mechanical Manning Technicians in operational procedures, inspections, first-line maintenance, alarm response, safe isolation, and incident escalation.</li><li>Review technician shift logs, inspection checklists, operating readings, alarm reports, and job-card closure records.</li><li>Support testing and commissioning activities, integrated systems testing, functional performance testing, equipment acceptance, redundancy verification, and operational-readiness activities.</li><li>Support predictive and condition-based maintenance programs, including vibration analysis, oil analysis, refrigerant checks, water and coolant sampling, thermal inspections, leak detection, and equipment-performance trending.</li><li>Manage liquid-cooling systems, Cooling Distribution Units, coolant loops, leak-detection systems, valves, pumps, and associated controls where installed.</li><li>Coordinate water-treatment activities, water-quality monitoring, chemical dosing, sampling, and corrective actions for chilled-water, condenser-water, and liquid-cooling systems where applicable.</li><li>Support WTP, STP, plumbing, drainage, and mechanical fire-protection systems where included within the data center operational scope.</li><li>Coordinate with electrical, BMS, IT, operations, HSE, vendors, and management teams during planned maintenance, incidents, testing, and emergency situations.</li><li>Maintain accurate mechanical documentation, asset records, maintenance reports, operating procedures, equipment histories, incident reports, testing records, and technical drawings.</li><li>Act as the mechanical technical authority during cooling incidents and operational escalations on a 24/7 on-call basis.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Engineer Level</li><li>Bachelor's degree in Mechanical Engineering.</li><li>Minimum of 5 years of mechanical, HVAC, cooling-plant, or critical-facility operations and maintenance experience.</li><li>At least 2 years of experience in a data center or another critical facility where loss of cooling could affect essential operations.</li><li>Demonstrated engineering-level experience with chilled-water systems, precision cooling, or critical HVAC systems.</li><li>Practical knowledge of chillers, pumps, cooling towers, heat exchangers, CRAH units, CRAC units, AHUs, valves, actuators, VFDs, and mechanical controls.</li><li>Experience in managing cooling redundancy, equipment capacity, environmental conditions, and critical maintenance activities in a live operational environment.</li><li>Demonstrated ownership of mechanical maintenance planning, technical procedure writing, incident response, vendor management, and spare-parts planning.</li><li>Experience preparing or approving SOPs, MOPs, EOPs, risk assessments, isolation plans, and maintenance procedures.</li><li>Ability to read and interpret P&amp;IDs, mechanical drawings, equipment schematics, sequence-of-operation documents, control diagrams, and OEM technical manuals.</li><li>Working knowledge of BMS or BAS platforms, mechanical alarms, equipment trends, sensors, control sequences, and environmental monitoring.</li><li>Good understanding of chilled-water temperatures, flow, pressure, differential pressure, delta-T, heat transfer, airflow, humidity, and cooling-capacity principles.</li><li>Experience with root cause analysis, corrective-action planning, and technical incident reporting.</li><li>Familiarity with testing, commissioning, integrated systems testing, and mechanical-system operational-readiness activities.</li><li>Fluent written and spoken English with strong technical reporting and communication skills.</li></ul><p>Other Requirements</p><ul><li>The role is fully on-site within an operational data center environment.</li><li>Availability for 24/7 on-call support is required.</li><li>The employee must be available to support planned shutdowns, emergency maintenance, testing activities, shift coverage, weekends, nights, and public holidays when operationally required.</li><li>The employee must comply with all company, client, data center, HSE, Permit to Work, LOTO, security, and access-control requirements.</li><li>The employee must be able to coordinate effectively with technicians, contractors, OEM vendors, operations teams, IT teams, and other engineering disciplines.</li></ul>

<p>Design and Estimate the value of project being tendered as part of the team. Work experience as Design Engineer in MNC Companies like SAIPEM, PETROFAC, TECHNIP, L&amp;T, MCDERMOTT, WOOD, WORLEY, FLUOR etc., would be preferred.</p><p>Role: Tender Manager</p><p><strong>Desired Candidate Profile</strong></p><p>Work experience as Design Engineer in MNC Companies like SAIPEM, PETROFAC, TECHNIP, L&amp;T, MCDERMOTT, WOOD, WORLEY, FLUOR etc., would be preferred.</p>

<p>Company : Leading company in Kuwait</p><p>Position : Electrical Design Engineer</p><p>Qualification : B.E/B.Tech in Electrical Engineering</p><p>Location : Kuwait</p><p>Salary : 600 - 700 KWD</p><p>Experience : Min 5 years</p><p>Company provides : Free Food, Accommodation &amp; local transportation</p><p>Interview mode : Online Interview</p><p>Job Description: Substation Design (Up to 400 kV), Review and develop, Single Line Diagrams (SLD), Protection schemes, Equipment layouts Coordinate GIS / AIS design requirements Ensure compliance with IEC and utility standards underground Cable Systems Design and review HV/EHV cable systems (up to 400 kV) Evaluate: Cable sizing, routing, and installation methods, Jointing and termination requirements Support technical submissions and approvals Overhead Transmission Lines Review and support design of OHL systems up to 400 kV</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification : B.E/B.Tech in Electrical Engineering</p><p>Experience : Min 5 years</p>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><p>An Associate s degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field. Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards. I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years. Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems. Must have an Active Secret US Government Clearance. US Citizenship is required to obtain a Secret Clearance.</p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will supervise, perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply advanced technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Craftsman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic and advanced technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to acquire and maintain SCR task(s) for position, as required (MQ-9 Engine Run, Flex Borescope, etc.)</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li> <li>Provides training to lower-level Aircraft Mechanics.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of five years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of two years’ experience on MQ-9 aircraft, as aircraft mechanic.</li> <li>Must have advanced knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Our client, a leading organization in the oil and gas sector, is seeking an experienced Civil Design Engineer to support critical TA26 projects at their PIC facility in Shuaiba, Kuwait. This temporary position plays a key role in delivering effective and efficient civil engineering design solutions that enhance plant output, performance and reliability within a demanding petrochemical environment.</p><br> <p><strong>Core Responsibilities</strong></p><br> <ul> <li>Provide robust civil engineering designs and solutions for TA26 projects, ensuring structural integrity, safety and durability of plant-related infrastructure.</li> <li>Optimize civil designs to support maximum plant output and performance while aligning with technical, safety and operational standards.</li> </ul><br><ul> <li>8-15 years of total experience in civil engineering, including a minimum of 8 years of hands on Design Engineering within the Oil &amp; Gas / Petrochemical industry. You will bring deep familiarity with industry standards, plant conditions and project execution in complex brownfield environments.</li> <li>Bachelor's Degree in Civil Engineering, approved by the Kuwait Society of Engineers, ensuring compliance with local professional and regulatory requirements.</li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary</p><p>We are seeking an experienced <b>Senior HVAC Engineer</b> to join our team in Kuwait. The ideal candidate will have 8–15 years of experience in HVAC design, execution, and project management, with strong knowledge of Kuwait regulations and construction standards. Candidates with prior Kuwait experience will be given preference.</p><p>Key Responsibilities</p><ul><li>Lead the design, review, and implementation of HVAC systems for commercial and industrial projects.</li><li>Perform HVAC load calculations and equipment selection in accordance with international and local standards.</li><li>Review and approve technical submittals, shop drawings, and material specifications.</li><li>Supervise HVAC installation, testing, commissioning, and troubleshooting activities.</li><li>Coordinate with project managers, consultants, contractors, and other engineering disciplines.</li><li>Ensure compliance with project specifications, safety regulations, and Kuwait codes.</li><li>Conduct site inspections and monitor project quality, progress, and schedules.</li><li>Provide technical guidance and mentoring to junior engineers.</li><li>Support project planning, cost control, and timely project delivery.</li><li>Stay updated with the latest HVAC technologies and energy-efficient solutions.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements</p><ul><li>Bachelor's Degree in Mechanical Engineering.</li><li><b>8–15 years</b> of relevant HVAC engineering experience.</li><li><b>Kuwait/GCC experience is preferred.</b></li><li>Strong knowledge of HVAC design standards, installation, testing, and commissioning.</li><li>Proficiency in AutoCAD and HVAC design software (HAP, Carrier, or equivalent).</li><li>Excellent communication, coordination, and problem-solving skills.</li><li>Valid Kuwait driving licence and transferable residency are an advantage.</li></ul><p><b>Preferred:</b> Experience in oil &amp; gas, industrial, or large commercial projects.</p></div>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul>

Job description:<br><br> What you will be doing Understand the project requirements, scope of work, project delivery schedule, project deliverables, etc. Develop a thorough understanding of client design requirements prior to the commencement of designproject. Coordinate with the Lead / Senior ELV Engineer for further clarifications on design requirements. Share the heat dissipation calculation with the Lead/Senior ELV Engineer. Revise the report based on client’s comments (if required). Share the electrical load requirements with the Lead/Senior ELV Engineer. Review data collection drawings / documents about the existing utilities around the project. Respond to site RFIs related to design. Review the drawings prepared by the modelers and ensure that all the client’s and authorities’requirements are respected. Also ensure that all the contractual obligations are followed. Maintain continuous quality control on all drawings produced under the section, ensuring that they adhereto PACE quality and CAD standards (e.g., high standards of visual presentation, error free, properlydimensioned, x-referenced etc.) Ensure that ELV Model is shared every Thursday as per Pace protocol with all the discipline working on theproject for coordination. Coordinate the major space requirements for the ELV services such as but not limited to MOC Room, Main Server Room, Security Control Room, IDF rooms, etc. with the project Architects. Assist in conducing site surveys (as and when required) to investigate the layout of existing ELV systemsprior to design. Assist on site ELV engineers by responding to technical queries which they raise. Attend project coordination workshops, and site visits during the project design and implement theoutcome of the same in the design. Based on the approved concept design, prepare the scheme for the ELV services for the project. Brief the same to the ELV Modelers and guide them for modelling the ELV services for the project. Based on the received information’s prepare the design and layout plans for ELV systems. Coordinate with HVAC Engineer for smoke zones used in the project and ensure that the Fire Alarm Zoneare in line with the smoke zones. Coordinate with team members effectively to ensure that all projects progress as planned in order not tocause project delays or budget over runs. Coordinate with the Architects and receive the area schedules and other project information. Ensure all the project deliverables are fulfilled during the different project submission stages. Prepare calculations and electrical load requirement for the ELV Systems. Prepare concept narrative report. Coordinate with Architects for the ELV services space requirements in the project. Assist site staff in verifying sample materials submitted by contractors (as and when required) to ensurecompliance against ministerial requirements and specifications. Attend site visit as required. Required Experience 5+ years Experience in designing ELV Systems. Awareness of Local and International Guidelines/ Codes/ Regulations for ELV Systems. Knowledge of Local and International codes such as KFF (local civil defence), GCC codes & regulations and NFPA. Knowledge of building managment system design Full knowledge of preparation of technical specification for ELV systems. Basic Knowledge in Auto CAD and Revit. Previous experience in value engineering study to ELV systems. Experience in handling multiple projects simultaneously in a similar environment. Working knowledge of MS Office. Cad, Revit software. Possess regional experience in design of ELV system. Previous experience shall include design of ELV system for Mega Projects of different categories such as Mixed Use Development, Educational buildings, Health Care, Hotel, Sport Facilities, Neighbourhoods, High Rise buildings, etc. Shall be capable of providing project presentations to client and authorities. Education Bachelor's degree in Electrical Engineering or equivalent. Professional certification or relevant ELV certifications will be an advantage. Certifications & Memberships Kuwait Society of Engineers (KSE) Membership or Any local Engineer's society membership (for hiring outside Kuwait). Any Certifications related to ELV systems. Training or course certificates from ELV Manufacturers. Essential Skills Experience of managing teams efficiently in a similar environment and on multiple projects. Proven record of interpersonal skills such as client interaction, he must be a strong team player skill and shall haveability to work pleasantly with a diverse work force. Track record in multitasking and shall have proven decision making ability. Good Internal and external communication skill such as ability to handle internal project coordination meeting with alldisciplines, dealing with authorities, presentation to clients, etc. Proven track record of the ability to express innovative ideas. Demonstrated experience in excellent communication skills both verbal and written. Demonstrated problem solving skills in previous roles and projects. Project Management experience. <br><br>Profile description:<br><br> About the Role Designing ELV Systems for various projects, and handle projects from the irinitiation to closure, and shall ensure adherence to the project deadlines and quality requirements in order to fulfill clientrequirements. Extra Low Voltage Engineers are responsible for ensuring that the Structured Cabling System, Converged Network System, Security System, Fire Alarm and Voice Evacuation System, IPTV and Digital Signage System, AV PA Systemetc. design of the project is in line with all the relevant authorities’ requirements and satisfying the contractual obligations.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a skilled QA/QC Engineer with a mechanical background to join our dynamic team in Kuwait, focusing on power and water projects. This role is pivotal in ensuring the highest quality standards in our engineering processes, contributing significantly to the successful delivery of complex infrastructure projects. As a QA/QC Engineer, you will play a critical role in maintaining compliance with industry standards and regulatory requirements, ensuring that every aspect of our projects meets or exceeds expectations.</p><p>In this position, you will have the opportunity to work closely with a multidisciplinary team, fostering a culture of collaboration and continuous improvement. We believe in investing in our employees' growth, offering various training programs and professional development opportunities that will enhance your skills and career trajectory. You will be encouraged to take initiative and propose innovative solutions, making your mark on our projects while being supported by experienced mentors.</p><p>As part of our commitment to excellence, we prioritize a positive work environment that values teamwork and open communication. You will have the chance to contribute to significant projects that impact the community, making your work meaningful and rewarding. We are looking for a proactive individual who is not only technically proficient but also passionate about quality assurance and control, eager to drive improvements and ensure project success.</p><p><b>Responsibilities:</b></p><ol><li>Develop and implement quality assurance procedures to monitor compliance with project specifications, utilizing tools such as checklists and audits to ensure adherence to standards.</li><li>Conduct regular inspections and tests on materials and workmanship during the construction phase, documenting findings and ensuring corrective actions are taken promptly.</li><li>Collaborate with project managers and engineers to identify potential quality issues early in the project lifecycle, facilitating proactive solutions to mitigate risks.</li><li>Prepare detailed quality control reports that outline inspection results, non-conformance issues, and recommendations for improvement, ensuring transparency and accountability.</li><li>Lead root cause analysis investigations for any quality-related incidents, employing problem-solving techniques to identify underlying issues and prevent recurrence.</li><li>Train and mentor junior QA/QC staff, sharing best practices and techniques to enhance the overall quality culture within the organization.</li><li>Stay updated on industry standards and best practices in quality assurance, integrating new methodologies into existing processes to drive continuous improvement.</li><li>Coordinate with external auditors and regulatory bodies during inspections, ensuring all documentation is accurate and readily available for review.</li><li>Participate in project planning meetings to provide insights on quality risks and mitigation strategies, ensuring quality considerations are integrated into project timelines and deliverables.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong understanding of quality assurance principles and methodologies, particularly in the mechanical engineering domain.</li><li>Experience with inspection and testing techniques relevant to power and water projects, ensuring compliance with regulatory standards.</li><li>Proficiency in developing quality control documentation, including quality plans, inspection reports, and non-conformance reports.</li><li>Excellent analytical and problem-solving skills, enabling effective identification and resolution of quality issues.</li><li>Strong communication skills, both written and verbal, to articulate quality standards and expectations to team members and stakeholders.</li><li>Ability to work collaboratively in a multidisciplinary team, fostering a culture of quality and continuous improvement.</li><li>Proficient in using quality management software and tools to track compliance and facilitate reporting processes.</li></ul></div>