وظائف مهندس تصميم ميكانيكي - الأحمدي الكويت

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The SIS Well Placement Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The SIS Well Placement Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Production Engineer is responsible for assisting the PSD team to deliver safe, efficient, and reliable product and service delivery for our customers. The Production Engineer develops and delivers optimized technical job designs for the area of responsibility. This person identifies opportunities for continuous improvement of service delivery and formally communicate findings, and supports the Product Line in risk management and apply lessons learned to improve job design. The Production Engineer provides real-time support to PSD operations as required, and is responsible for the COSD (i.e. resource consumption). Develop technical job designs as required for the Product Line. Identify areas where new and cost-effective techniques can be applied. Explore opportunities for value-added products and services. Provide technical support throughout the service delivery process. Understand and communicate value of technology and interpretations. Consult with relevant subject matter experts as required to optimize the technical design. Support the OU PSD and/or PSD Manager in the execution phase with design changes as required due to changes in job dimensions, resource availability, service quality incidents, etc. Assist in incident response, recovery, and incident investigation. Support multiple Product Line operations in a collaborative optimized job design. Assist sales and commercial team in evaluating technical viability and tenders. Analyze job execution vs. design and formally capture design improvements and optimization opportunities (lessons learned and best practices).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>15+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law. _x000D_</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Well Engineer is responsible for ensuring well engineering and operations support for one or more rigs or well sites. They are tasked with developing and delivering optimized technical well designs for areas of responsibility, including preparation of Well Proposals, Basis of Designs, Well Programs(i.e., Drilling, Completion, Workover), project budgets, and End of Well Reports. They perform Assistant Well Site Leader duties according to the Well Engineer Training Program development requirements. They also provide risk management project support and apply lessons learned to improve the well program and provide real-time support to the project operations as required. The position is expected to identify opportunities for continuous improvement of service delivery, well program, well operations, and formally communicate findings. Provide technical and operational support throughout the project execution process. Prepare well schedule, budget estimates, and project well control briefing. Support multiple PL operations in a collaborative optimized program design. Assist in incident response, recovery, and incident investigation. Understand, communicate, and implement new technologies for the project. Analyze job execution versus design and formally capture design improvements and optimization opportunities. Participate in selection and evaluation of service companies, suppliers, and equipment. Ensure proper communication with relevant parties (i.e., Customer, PLs, third-parties, etc.) Participate in HARCs and other risk assessment methodology. Forecast and plan medium- and long-term needs to meet program requirements Anticipate operational changes and needs and revise the plan accordingly. Manage and monitor daily operational progress (i.e., scope, time, cost and quality) versus plan and provide recommendations for improvements utilizing new technology options where appropriate. Evaluate results versus objectives, focusing on service companies and key contractors performance. Perform engineering studies to solve recurring well problems and initiate engineering corrective actions for continuous improvement. Attend critical operations at the wellsite as necessary.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Production Stimulation Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Stimulation Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations. Offers technical guidance to engineers or technicians assigned to work on a common project. Mentors junior stimulation engineers within Well Services and DCS. Organizes client seminars, understands and catalogues client needs and implements solutions. Is regarded as a stimulation expert within the oilfield community and represents Schlumberger in various and multiple industry forum. Periodic publications in these forums are expected. May participate in recruiting.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>15+</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Completion &amp; Well Intervention Engineer specializes in Completions and/or Workovers. The Senior Completion &amp; Well Intervention Engineer is responsible for well engineering and operations support for one or more completion, workover rigs or rigless completion operation including preparing Completion and Workover Programs and procedures and AFE's. This person supervises and mentors Field Engineer Trainees and junior engineers, and attends critical operations at the wellsite as necessary, as a technical advisor. Work with Subsurface and Production to ensure completion and workover plans meet requirements and objectives.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Reviews Completion Basis of Design and performs detailed design checks.</li><li>Review all completion hardware components for compatibility with clearances, setting pressure/turns/weight, and couplings.</li><li>Review regulatory requirements to determine downhole and surface safety equipment requirements and confirm compliance of final equipment configuration.</li><li>Review current well status and well integrity.</li><li>Prepare final well status post completion / workover.</li><li>Prepare completion / workover operations flowchart and contingencies.</li><li>Confirm final hardware design and compatibility (stimulation, treating, production) with TDAS.</li><li>Write program for making up sub-assemblies, drifting, gauging and pressure testing prior to them being RIH.</li><li>Determine required fluid density and composition for formation compatibility to minimize formation damage and manage fluid losses.</li><li>Review and determine compatibility of all slickline and wireline operations required.</li><li>Review fishing tool requirements and alternatives (workover).</li><li>Write program for setting cement plugs e.g. squeezing perforations, and any remedial cementing (workover).</li><li>Review and insure compliance with high pressure treating standards.</li><li>Ensure compliance with IPM Standards for Simultaneous Activities.</li><li>Ensure IPM Barrier Standards is complied with when removing the BOP and installing the Christmas Tree.</li><li>Prepares Completion / Workover Programs and follows the execution of programs technically.</li><li>Prepares Completion / Workover procedures.</li><li>Prepares Completion / Workover time estimates and AFE's.</li><li>Review the program with all parties involved (drilling contractor, completion, wellhead, slickline, etc.).</li><li>Participates in selection and evaluation of service companies, suppliers and equipment.</li><li>Ensures proper communication with relevant parties (client, Product Lines, third parties, etc.).</li><li>Participates in cost control of programs Vs AFE by analyzing solutions.</li><li>Reviews new technology for possible application to project.</li><li>Uses InTouch for best practices, lessons learned and technical alerts.</li><li>Participates in HARC preparation.</li><li>Prepares requests for exemptions to IPM Standards in QUEST.</li><li>Enters SQ RIR's resulting from Completion / Workover operations in QUEST.</li><li>Prepares Management of Change to Completion / Workover programs.</li><li>Forecasts and plans medium and long term needs to meet program requirements.</li><li>Anticipates operational changes and needs and revises plan accordingly.</li><li>Participates in Daily Operations Meetings.</li><li>QA/QC of data in Daily Report.</li><li>Monitors daily progress against plan.</li><li>Monitors actual costs Vs AFE.</li><li>Record and monitor operational NPT trends.</li><li>Evaluates results Vs goals and performance of service companies.</li><li>Initiates engineering corrective action to ensure a process of continuous improvement.</li><li>Performs engineering studies to solve recurring problems (completion hardware problems, etc.).</li></ul>15+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law. _x000D_ Apply Now Share_x000D_<p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Well Engineer is responsible for well engineering on a project and requires both detailed and broad well engineering and operations knowledge including the ability to design wells for a wide range of well types and different rig operations. The Senior Well Engineer is expected to supervise and mentor more junior Well Engineers on a project and requires management skills in addition to technical competency. Reviews and approves the Well Proposal and Basis of Design and follows the execution of programs technically. Reviews and approves Well Programs and End-of-Well reports. Reviews and approves well operations procedures e.g. Casing running and cementing. Participates in selection and evaluation of service companies, suppliers and equipment. Ensures proper communication with relevant parties (client, segments, third parties, etc.). Participates in cost control of programs vs AFE by analyzing solutions. Assures Technical Integrity of Well Operations programs. Participate in well performance reviews to ensure focus on increased ft/day and reduced flat time. Reviews and approves project well control briefing. Reviews new technology for possible application to project. Take active role in Drilling TIC projects as assigned. Uses InTouch for best practices, lessons learned and technical alerts. Ensures best practices and lessons learned are transferred between all rigs on a project. Verify invoices for service companies. Deputize for Project Manager as required. Participates in HARC's. Ensures compliance to IDS Standards and Procedures. Reviews requests for exemptions to IDS Standards in QUEST. Reviews SQ RIR's resulting from well operations in QUEST. Participates in and leads SQ investigations. Reviews and approves Management of Change to well programs. Forecasts and plans medium and long term needs to meet program requirements. Anticipates operational changes and needs and revises plan accordingly. Participates in Daily Morning Meetings. Evaluates results vs goals and performance of service companies. Monitors daily Time/Depth progress and take active part in daily performance calls. Monitors daily cost/depth progress vs AFE. Reviews performance trends including NPT across all rigs. Initiates engineering corrective action to ensure a process of continuous improvement. Initiates engineering studies to solve recurring problems (wellbore stability, lost circulation, washouts, etc.).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>15+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Candidate should have experience in the field of Information &amp; Technology Expertise in the field of Networks. Major work responsibilities like Installing, Configuring, and Troubleshooting and Designing of LAN, WAN, WLAN, ASA, Cisco CUCM, Palo alto and Fortigate firewalls.<br></p><ul><li><p>Handling of Cisco switches.</p></li><li><p>Handle Layer 2 connectivity between LAN &amp; WAN branches Along with point-to-point link and point to multi point link and implement required security.</p></li><li><p>Upgrading of IOS of network devices.</p></li><li><p>Handling of proxy Engine along with Content filtering.</p></li><li><p>Monitoring and shaping of Internet bandwidth.</p></li><li><p>Handling Access Control to all network devices using Tacacs+ services.</p></li><li><p>Analyze &amp; Research on New Network Products for Ministry.</p></li><li><p>Analyze all Operational &amp; Network related Jobs at Ministry.</p></li><li><p>Daily troubleshooting for LAN and WAN problems.</p></li><li><p>Configuring &amp; troubleshooting for LAN, WAN, and Firewalls (NGFW).</p></li><li><p>Configuring &amp; troubleshooting the Load balancer.</p></li><li><p>Configuring &amp; troubleshooting Infoblox.</p></li><li><p>Configuring &amp; troubleshooting Arbor.</p></li><li><p>Troubleshooting Network and Security infrastructure.</p></li><li><p>Installation and configuration of Routers, switches, and wireless LAN.</p></li><li><p>Hands-on experience in NAC solutions</p></li><li><p>Preventive maintenance report for in-house devices.</p></li><li><p>Troubleshooting and resolving Tickets.</p></li><li><p>Deployment and Configuration of UTM appliances</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Candidate Must have University Degree in Computer science or engineering or equivalent</p></li><li><p>Candidate Must have Cisco Certified Internetwork Expert, Lab (CCIE) Security</p></li><li><p>Candidate Must have Cisco Certified Internetwork Expert, Lab (CCIE) Routing &amp; Switching</p></li><li><p>Candidate Must have Palo Alto Network Certified Network Security Engineer (PCNSE)</p></li><li><p>Candidate Must have Fortinet Network Security Expert (NSE-1)</p></li><li><p>Candidate Must have Fortinet Network Security Expert (NSE-2)</p></li><li><p>Candidate Must have Fortinet Network Security Expert (NSE-3)</p></li><li><p>Candidate Must have Cisco Certified voice professional (CCVP/CCNP Voice)</p></li><li><p>Candidate Must have Cisco Certified Network Associates Voice (CCNA Voice)</p></li><li><p>Candidate Must have Cisco Certified Network Associates (CCNA R&amp;S)</p></li><li><p>Candidate Must have Microsoft Certified Systems Engineer (MCSE)</p><br></li></ul><p></p></section>

<p>Should have an Interdisciplinary knowledge in Technical and Commercial document understanding, standards and regulations.</p><p>Should have Minimum 8 years of work experiences in construction/execution, estimation, planning in international EPC/Multi discipline construction companies serving the oil and gas/refinery/petrochemical.</p><p>Hands on experience in generation of MTO’s /BOQ’s from the drawings.</p><p>Able to read and understand GA Drawings, P&amp;IDs.</p><p>&nbsp;</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Own the SF-domain integrated schedule, cost and performance view, focusing on interfaces, scenarios, forward-looking risk, and cost implications.</p></li><li><p>Acts as the SF manager’s technical guardian across engineering deliverables, without duplicating EPCC design authority.</p></li><li><p>Integrate EPCC, and other interface discipline inputs into SF view or project</p></li><li><p>Forecast scenarios, what-if cases, identify schedule clashes</p></li><li><p>Track schedule performance (SPI), critical paths, milestones, and key handovers</p></li><li><p>SF cost/budget/variation order control, VOWD / CPI performance tracking</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Holds a bachelor's degree in engineering</p></li><li><p>8-10+ years oil &amp; gas projects</p></li><li><p>In EPC workflows, project controls</p></li><li><p>Primavera P6 (preferred)</p></li><li><p>Strong Microsoft Project (mandatory).</p></li><li><p>Competence in project performance metrics</p></li><li><p>Comfortable challenging EPC logic and assumptions</p></li><li><p>Good interpersonal skills to enable data exchange and collaboration</p></li><li><p>Kuwait based / Valid driving license / Transferable visa</p><p><br></p></li></ul><p></p></section>

<ol><li><p>Overall 6 Years Experience in Construction Project, Instrumentation Works in Oil & Gas / Refinery / Petrochemical Projects & Out of 6 Years, Min. 2 Years in Cost & Estimation Functions.</p></li><li><p>Review of Tender Documents & Preparing Enquiries for Subcontract / Vendor Service works.</p></li><li><p>Must have good computer skills (MS Office).</p></li><li><p>Gulf / Abroad Experience Preferred.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p> B. E. / Btech– Electrical & Electronics (OR) Electronics & Instrumentation Engineering (4 Years Full Time Course) </p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Candidates must have relevant experience in Substation and/or Overhead Transmission Line projects, either in India or internationally.</p></li><li><p>Develop and implement comprehensive safety programs tailored to Indian regulatory standards and workplace environments.</p></li><li><p>Conduct thorough hazard identification and risk assessments (HIRA) for all operational activities, focusing on potential Indian workplace hazards.</p></li><li><p>Investigate all accidents, near misses, and unsafe conditions, determining root causes and implementing corrective and preventive actions.</p></li><li><p>Ensure compliance with all relevant Indian safety legislation, including the Factories Act, and other applicable regulations.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Engineering (Mechanical, Chemical, Civil, Electrical) or equivalent.</p></li><li><p>The engineering college and the relevant discipline must be accredited by the National Board of Accreditation (NBA).</p></li><li><p>Possession of a relevant professional safety certification (e.g., NEBOSH IGC, IOSH, or Indian equivalent).</p></li><li><p>Minimum of 5 years of progressive experience in safety engineering within the Indian industrial sector.</p></li><li><p>Proven experience in implementing and managing OHSAS 18001/ISO 45001 management systems.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>Laserfiche Administration: Configure, maintain, and troubleshoot Laserfiche workflows, repositories, and integrations.</strong></p></li><li><p>System Support: Provide technical support for archive and correspondence applications, ensuring high availability and performance.</p></li><li><p>Database Management: Administer MS-SQL databases, including performance tuning, backup, and recovery.</p></li><li><p>Server &amp; Storage Management: Oversee server infrastructure and storage systems, ensuring reliability, scalability, and security.</p></li><li><p>Incident Resolution: Diagnose and resolve application, server, and database issues in collaboration with vendors and internal teams.</p></li><li><p>Documentation: Maintain clear technical documentation, SOPs, and escalation procedures.</p></li><li><p>User Training: Support end-users with training, guidance, and troubleshooting assistance.</p></li><li><p>Compliance &amp; Security: Ensure systems adhere to organizational policies, data protection standards, and IT governance frameworks.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Computer Science, Information Technology, or related field.</p></li><li><p>Proven experience in Laserfiche system administration.</p></li><li><p>Strong knowledge of Microsoft OS environments (Windows Server, Active Directory).</p></li><li><p>Hands-on expertise with MS-SQL (queries, stored procedures, optimization).</p></li><li><p>Experience in server and storage administration (SAN/NAS, virtualization, backup solutions).</p></li><li><p>Familiarity with ITIL practices and enterprise support frameworks.</p></li><li><p>Excellent problem-solving, communication, and documentation skills.</p></li><li><p>Ability to work independently and collaboratively across ministries and vendors.</p></li></ul><p></p></section>

<ul><li><p>Design and detailed engineering of API 650 and API 620 storage tanks.</p></li><li><p>Review tender documents, client specifications, and design basis.</p></li><li><p>Prepare design calculations for tank shells, roofs, bottoms, nozzles, wind girders, anchor bolts, and foundation loading.</p></li><li><p>Prepare RFQs, Material Requisitions, Technical Specifications, BOQs, and Tank Design Reports.</p></li><li><p>Design Cone Roof, Dome Roof, Internal Floating Roof (IFR), External Floating Roof (EFR), and Aluminium Geodesic Dome Roof tanks.</p></li><li><p>Prepare General Arrangement (GA) drawings, nozzle orientation drawings, plate arrangement drawings, and fabrication detailing.</p></li><li><p>Review vendor drawings, FEA reports, and perform technical bid evaluations.</p></li><li><p>Coordinate with Civil, Process, Piping, Structural, Electrical, and Instrumentation teams.</p></li><li><p>Support fabrication, erection, hydrotesting, commissioning, and troubleshooting.</p></li><li><p>Conduct site surveys and recommend repair or fitness-for-service solutions.</p></li><li><p>Prepare as-built documentation and resolve technical queries.</p></li></ul><p><strong>Codes & Standards</strong></p><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Storage tank engineering</p></li><li><p>Hydrocarbon storage terminals</p></li><li><p>Tank fabrication and erection</p></li><li><p>Welding, inspection, and testing</p></li><li><p>Material selection and corrosion engineering</p></li><li><p>Vendor document review</p></li><li><p>Technical bid evaluation</p></li><li><p>Mechanical design calculations</p></li><li><p>EPC project coordination</p></li><li><p>Strong communication and problem-solving skills</p></li></ol>

<p><strong>Previous Work Experience:</strong></p><p>&nbsp;</p><p>• 10 years’ experience in refining Operations, process plant pre-commissioning/commissioning with an engineering qualification in any discipline or equal experience with a lower qualification; knowledge of process/equipment maintenance.</p><p>• 5 years’ experience in developing Operating &amp; Maintenance procedures or similar documents</p><p>• Possess ability to act as Competency Assessor to multinational workforce.</p><p>• Previous experience of working in the UAE/Middle East/Africa/Asia is essential as is experience of working in a multi discipline, multi-national team.</p><p><br></p><p><strong>Education:</strong></p><p>&nbsp;</p><p>• 12 years of education, GCE ‘O’ Level, or HND in Technology; a recognized degree in Technology/Engineering, Chemical, Mechanical, Process and/or Electrical is preferred.</p><p><br></p><p><strong>Certification:</strong></p><p>A Chartered Engineer or equivalent, preferable.</p><p><br></p><p><strong>Professional Qualifications:</strong></p><p><br></p><p>• Formal Assessor Qualifications. Preferably OPITO, NVQ, TAA, TAE, SQA or equivalent.</p><p>• Formal Train the Trainer qualifications or equivalent desirable.</p><p>• Internal Verification qualifications or equivalent desirable.</p><p><br></p><p><strong style=\

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking to recruit an experienced Cyber Security Engineer / Cyber Security Specialist to join our team and support both tender preparation and project delivery activities. We would appreciate it if you could identify and submit suitable candidate profiles matching the requirements below.<br></p><ul><li><p>relevant Cyber Security experience.</p></li><li><p>Proven experience in both pre-sales/tendering and project implementation environments.</p></li><li><p>Experience working with government, enterprise, critical infrastructure, or large-scale ICT projects is highly preferred.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Tender &amp; Presales Support</strong></p><ul><li><p>Review RFPs, RFQs, and tender documents.</p></li><li><p>Prepare technical compliance matrices and cybersecurity responses.</p></li><li><p>Develop cybersecurity architectures and solution designs.</p></li><li><p>Prepare technical proposals, BOQs, and sizing recommendations.</p></li><li><p>Coordinate with vendors and technology partners for solution design and quotations.</p></li><li><p>Participate in technical presentations and customer meetings.</p></li></ul><p><br><strong>Project Delivery</strong></p><ul><li><p>Lead implementation and integration of cybersecurity solutions.</p></li><li><p>Prepare HLD, LLD, implementation plans, and technical documentation.</p></li><li><p>Conduct system testing, acceptance testing, and handover activities.</p></li><li><p>Provide technical support during deployment and commissioning.</p></li><li><p>Coordinate with customers, vendors, and project teams to ensure successful delivery.</p></li><li><p>Support troubleshooting, optimization, and knowledge transfer activities.</p></li></ul><br><p><strong>Technical Skills (Preferred)</strong></p><p>Candidates should have hands-on experience in several of the following areas:</p><ul><li><p>Network Security</p><ul><li><p>Next Generation Firewalls (Palo Alto, Fortinet, Check Point, Cisco, etc.)</p></li><li><p>IPS/IDS</p></li><li><p>VPN Technologies</p></li></ul></li><li><p>Security Operations</p><ul><li><p>SIEM Solutions</p></li><li><p>SOAR Platforms</p></li><li><p>SOC Operations</p></li></ul></li><li><p>Identity &amp; Access Management (IAM)</p><ul><li><p>MFA</p></li><li><p>Privileged Access Management (PAM)</p></li><li><p>Identity Governance</p></li></ul></li><li><p>Endpoint &amp; Cloud Security</p><ul><li><p>EDR/XDR Solutions</p></li><li><p>Cloud Security (Azure, AWS, Microsoft 365)</p></li></ul></li><li><p>Application &amp; Infrastructure Security</p><ul><li><p>Vulnerability Assessment</p></li><li><p>Security Hardening</p></li><li><p>Risk Assessment</p></li><li><p>Security Monitoring</p></li></ul></li></ul><br><p><strong>Certifications (Preferred)</strong></p><p>One or more of the following certifications would be an advantage:</p><ul><li><p>CISSP</p></li><li><p>CISM</p></li><li><p>CCSP</p></li><li><p>CEH</p></li><li><p>CompTIA Security+</p></li><li><p>Palo Alto Certifications</p></li><li><p>Fortinet NSE/FCP Certifications</p></li><li><p>Microsoft Security Certifications</p></li><li><p>Cisco Security Certifications</p></li></ul><p><br><strong>Education</strong></p><ul><li><p>Bachelor's Degree in Cyber Security, Computer Engineering, Computer Science, Information Technology, or related field.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. JOB DETAILS Direct Report Project HSE Manager Operational Scope Civil Works | Drilling &amp; Completions | Work Over | Facilities | Production Supervises Mechanical Lifting contractors; Drilling Rig Lifting Crews; any Contractor performing Mechanical Lifting activities under SLB operational control; site level DROPS auditors and HSE Specialists in their execution of the DROPS Program</p><p>2. ROLE PURPOSE The Mechanical Lifting &amp; DROPS Subject Matter Expert Lead is the SLB Mutriba Project authority for the safe design, planning, execution, and continuous improvement of Mechanical Lifting and Dropped Objects Prevention (DROPS) activities across the Mutriba Field Development Project. The role combines planning and operational SME oversight of lifting operations with assurance of the Project's DROPS system implementation, ensuring full compliance with SLB standards, client requirements, and applicable regulatory frameworks across all project phases and contractor interfaces.</p><p>3. KEY RESPONSIBILITIES</p><p>Mechanical Lifting SME</p><ul><li>Lead the planning, preparation, implementation, monitoring, and review of Mechanical Lifting Plans (MLPs) for all project phases, including all prevention and mitigation measures.</li><li>Review and validate all critical lifting plans prepared by SLB and Contractors, categorize lifts in accordance with the Lift Categorization Questionnaire, and submit Critical and Non-Routine lifts to the right channels.</li><li>Personally supervise the execution of Non-Routine, Critical, and Complex lifts across all project locations, such as Rig Mobilization, Initial Rig Moves, Skidding operations and de-mobilization.</li><li>Ensure all lifting risk assessments (HARC/JSA) are prepared, reviewed, and adequate prior to the commencement of any lifting operation.</li><li>Assess Pre-Job Safety Meetings (PJSMs) related to mechanical lifting operations and verify that controls identified in the MLP and HARC are communicated and understood by all participants.</li><li>Advise and stop lifting operations during adverse weather conditions (lightning, high-wind events) and verify suspension and resumption criteria are clearly defined and enforced at site level.</li><li>Establish, maintain, and audit all Project Lifting Equipment Registers across all rig sites and call-out services, ensuring all lifting appliances and accessories are inspected, certified, color-coded, and fit for purpose.</li><li>Verify that third-party lifting equipment introduced to SLB managed sites holds valid certification from an LEEAaccredited or equivalent body, aligned with applicable standards.</li><li>Ensure adequate storage and in-service maintenance of all lifting gear and accessories in accordance with Project and client s requirements.</li><li>Drive compliance with SLB's Mechanical Lifting Standard (SLB-HSE-S013) and Mechanical Lifting B.O.O.K. (SLB-HSE-M013) across all contractor interfaces.</li><li>Conduct frequent, structured audits of all ML activities and equipment at rig sites and call-out service locations, documenting findings and tracking corrective actions closure.</li><li>Perform ML related assessments for the Annual Audit and Inspection Plan (AAIP) to verify ongoing compliance with SLB standards, client procedures, and regulatory requirements.</li><li>Report all lifting-related events in QUEST (SLB incident management system) in a timely manner, ensuring accuracy of classification, causal analysis, and corrective/preventive action assignment.</li><li>Lead or actively participate in investigations of any incident, near miss, or high-potential event related to mechanical lifting operations.</li><li>Coach, assess, and verify the competence of personnel involved in ML operations such as Lifting Supervisors, Crane Operators, Banksmen, and Riggers, against defined competency frameworks.</li><li>Maintain competency assessment records and ensure training validity periods are tracked and renewed.</li><li>Deliver or coordinate delivery of ML awareness and technical training as required by project needs.</li><li>Serve as primary interface with customer s Lifting Authority for ML plans, approvals, and regulatory compliance.</li></ul><p>DROPS Authority</p><ul><li>Project-level DROPS Program Assurance Lead for integrity, consistency, and effectiveness of the DROPS prevention program across all Mutriba Project locations.</li><li>Review, evaluate, and formally validate DROPS Inspection Reports submitted by rig sites and service locations, verifying accuracy on findings, classification, and effectiveness and closure of corrective actions.</li><li>Validate the correct implementation of DROPS, including DROPS Zone identification, zoning maps, barrier deployment, DROPS Picture Books, tethered tool program, and related.</li><li>Conduct structured DROPS Program audits across all active project phases and locations, assessing compliance with SLB-HSE-S023 (DROPS Standard) and the DROPS B.O.O.K. (SLB-HSE-M023).</li><li>Verify DROPS inspection checklists for rig-ups, and the maintenance of DROPS Inspection Schedules.</li><li>Support site-level HSE Supervisors in identifying dropped object and Work at Height hazards.</li><li>Ensure DROPS incidents are reported, classified, and investigated in accordance with project and SLB requirements, and lessons-learned dissemination across the project.</li><li>Maintain and monitor DROPS program performance metrics; escalate systemic non-conformances.</li></ul><p>Additional Responsibilities</p><ul><li>Participate in Project HAZOP/HARC processes as the ML and DROPS SME for ML scenarios under review.</li><li>Support development and review of project HSE Plans, procedures, and standards related to ML and DROPS.</li><li>Contribute to pre-mobilization readiness reviews as the ML/DROPS technical authority.</li><li>Support emergency response planning for lifting-related scenarios (crane collapse, load drop, manriding rescue) and verify that adequate rescue plans are in place.</li><li>Assist developing the Annual Audit and Inspection Plan (AAIP) for ML and DROPS activities.</li></ul><p>4. AUTHORITY</p><ul><li>Authority to Stop Work on any mechanical lifting or related activity that does not comply with approved lift plans, SLB standards, or client requirements.</li><li>Authority to reject and require re-submission of non-compliant lift plan with SLB or client requirements.</li><li>Authority to require the removal of lifting equipment or accessory found defective, uncertified, or non-compliant.</li><li>Authority to withhold validation for any site or location non-compliant with DROPS system requirements.</li><li>Authority to escalate non-conformances to Contractor and Project Management</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in engineering or Technical Career</li><li>Professional Certification: LEEA Appointed Person for Lifting Operations or similar.</li><li>Third-party certification credited by LEEA or NSL.</li><li>DROPS Level 3 Focal Point.</li><li>Minimum 10 years of experience in a dedicated Mechanical Lifting supervisory or SME capacity, preferably on the Oil &amp; Gas Industry.</li><li>Demonstrated experience operating in multi-contractor onshore drilling environments, including direct supervision of crane, rigging, and lifting appliance crews.</li><li>Prior experience conducting DROPS program audits and managing DROPS systems at rig or field level</li><li>Fluent English mandatory. Arabic is an advantage.</li></ul><p></p></section>

<p>To provide specialized services related to the design and construction of orthodontic appliances, and to participate in prosthetics work covering both full and partial removable appliances.</p><p>Design and construct the orthodontic appliances for each case by receiving master impression from orthodontic clinic via supervisor and discusses course of action, duration of work and potential problems with supervisor. </p><p>Specialized in the technical aspect of orthodontic work according to the latest technology applied i.e. construct appliances to the specification of the orthodontist by preparing study models, fixing springs, retraction hooks and expansion screws to ensure desired effect, assembling on to a master model, waxing on to a base and processing in acrylic resin.</p><p>Construct both full and partially upper and lower denture by designing wax bite block, selecting teeth and carving them to desired shape, processing with acrylic resin and trimming and polishing. </p><p>Design and construct silver cap splints for (fractured jaws) injuries by preparing a model on an articulator to re-produce patient bites, involves positioning, locking plates and soldering the splints to the locking plates. </p><p>Carries out other related duties such as maintaining workbench equipment in a safe manner, assisting colleagues by undertaking prosthetic activities as workload demands. </p><p><strong>Desired Candidate Profile</strong></p><p>Education: Diploma in Dental Technology plus advanced diploma (or equivalent experiences) from a recognized institution.</p><p>Experience: 6 years.</p><p>Practicing license from Ministry of Health – Kuwait. </p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Provide independent technical oversight of, and influence over, EPCC engineering workflows and deliverables quality to ensure their fitness for purpose.</p></li><li><p>Acts as the SF manager’s technical guardian across engineering deliverables, without duplicating EPCC design authority.</p></li><li><p>Review EPCC engineering deliverables and identify problems</p></li><li><p>Ensure compliance with client standards, project basis, and specs</p></li><li><p>Track engineering maturity, deliverable quality, and technical risk</p></li><li><p>Harmonize SF technical interfaces across disciplines</p></li><li><p>Advise on deviations, concessions, and technical risk exposure</p></li><li><p>Ensure readiness of documents for client approval cycles</p></li><li><p>Monitor and manage engineering MOC</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Holds a bachelor's degree in mechanical engineering or relevant</p></li><li><p>15+ years oil &amp; gas facilities engineering</p></li><li><p>Core discipline: piping, mechanical, or process</p></li><li><p>Broad multi-discipline understanding (E&amp;I, civils, layout)</p></li><li><p>High familiarity with EPC deliverables lifecycles</p></li><li><p>Experience with client approvals, Master Document List, and assurance</p></li><li><p>Good judgement; able to challenge without re-engineering</p></li><li><p>Good technical questioning ability to unearth and foresee problems</p></li><li><p>Kuwait based/ transferable visa</p></li></ul><p></p></section>