وظائف فنى مصاعد في الكويت

<p>Elevator maintenance technician required for a reputable elevator company. Must have a valid driver's license and be ready to work.</p>

<p>An auto mechanic technician inspects, maintains, and repairs cars, trucks, and other vehicles.</p><p>Their core duties involve using computerized diagnostic tools to find mechanical or electrical problems, performing routine tune-ups or oil changes, and replacing worn-out or broken parts to keep vehicles safe and efficient on the road.</p><p>&nbsp;</p><p><strong>Job Summary</strong></p><p>An automotive service technician ensures vehicle safety and performance by identifying malfunctions, executing precise repairs, and communicating repair needs clearly to customers or service advisors</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><p>• Diagnostics: Use electronic scanners and diagnostic equipment to read error codes and pinpoint engine, transmission, or electrical issues.</p><p>• Routine Maintenance: Change motor oil, rotate tires, check fluid levels, replace brake pads, and service batteries.</p><p>• Repairs &amp; Replacements: Fix or swap out defective parts like alternators, sensors, belts, and suspension components.</p><p>• Testing: Test drive vehicles or use specialized shop equipment to verify that systems operate properly after service.</p><p>• Documentation: Record all completed services, parts utilized, and labor hours accurately<br>&nbsp;</p><p ><span lang="ar" dir="rtl">يتولى <strong>فني ميكانيكا السيارات</strong> مهام فحص وصيانة وإصلاح السيارات والشاحنات والمركبات الأخرى.</span></p><p ><span lang="ar" dir="rtl">وتتمثل مهامه الأساسية في استخدام أدوات التشخيص المحوسبة للكشف عن الأعطال الميكانيكية أو الكهربائية، وإجراء عمليات الضبط الدوري أو تغيير الزيت، واستبدال الأجزاء التالفة أو المكسورة لضمان سلامة المركبات وكفاءة أدائها على الطريق.</span></p><h3 ><span lang="ar" dir="rtl">مهام الوظيفة</span></h3><p ><span lang="ar" dir="rtl">يعمل <strong>فني خدمة السيارات</strong> على ضمان سلامة المركبات وكفاءة أدائها من خلال تحديد الأعطال، وإجراء الإصلاحات الدقيقة، وتوضيح احتياجات الإصلاح للعملاء أو مستشاري الخدمة.</span></p><h3 ><span lang="ar" dir="rtl">المسؤوليات الرئيسية</span></h3><ul><li><p ><span lang="ar" dir="rtl"><strong>التشخيص:</strong> استخدام أجهزة المسح الإلكتروني ومعدات التشخيص لقراءة رموز الخطأ وتحديد المشكلات المتعلقة بالمحرك أو ناقل الحركة أو الأنظمة الكهربائية بدقة.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الصيانة الدورية:</strong> تغيير زيت المحرك، وتبديل أماكن الإطارات (تدويرها)، وفحص مستويات السوائل، واستبدال وسادات المكابح، وصيانة البطاريات.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الإصلاح والاستبدال:</strong> إصلاح أو استبدال الأجزاء المعطلة مثل المولدات (الدينامو)، والمستشعرات، والأحزمة، ومكونات نظام التعليق.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الاختبار:</strong> قيادة المركبات تجريبياً أو استخدام معدات الورشة المتخصصة للتحقق من عمل الأنظمة بشكل سليم بعد إجراء الخدمة.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>التوثيق:</strong> تسجيل كافة الخدمات المنجزة، وقطع الغيار المستخدمة، وساعات العمل بدقة.</span></p></li></ul>

<p>Immediate hire – Gym Equipment Technician</p><p>NOW HIRING – Gym Equipment Technician</p><p>&nbsp;</p><p>━━━━━━━━━━━━━━━━━━━</p><p>&nbsp;</p><p>&nbsp;Job Title:</p><p>Specialized Technician in the Assembly and Maintenance of Non-Electric Gym Equipment</p><p>&nbsp;</p><p>&nbsp;Position:</p><p>Installation &amp; Maintenance Technician (Non-Electrical Gym Equipment)</p><p>&nbsp;</p><p>Work location: Mina Abdullah, Kuwait</p><p>Location: Mina Abdullah, Kuwait</p><p>&nbsp;</p><p>━━━━━━━━━━━━━━━━━━━</p><p>&nbsp;</p><p>✅ Requirements:</p><p>&nbsp;</p><p>• Experience of at least two years in installation and maintenance</p><p>&nbsp; Minimum 2 years of experience in installation &amp; maintenance</p><p>&nbsp;</p><p>• Valid driving license</p><p>&nbsp; Valid driving license</p><p>&nbsp;</p><p>• Immediate availability to start</p><p>&nbsp; Immediate availability to start</p><p>&nbsp;</p><p>• Residency transfer available</p><p>&nbsp; Residency transfer (Iqama transfer) available</p><p>&nbsp;</p><p>━━━━━━━━━━━━━━━━━━━</p><p>&nbsp;</p><p>Salary:</p><p>250 – 300 Kuwaiti Dinar</p><p>250 – 300 KWD</p><p>&nbsp;</p><p>━━━━━━━━━━━━━━━━━━━</p>

<h2>Company Overview</h2><p>Leading company in the technical services and industrial materials supply sector in Al-Farwaniyah, Kuwait, seeking to bring a talented printing technician to join our growing team. We offer a supportive work environment and professional development opportunities with a focus on service quality and interdepartmental coordination to achieve customer satisfaction and optimize operational processes.</p><h2>Key Responsibilities and Duties</h2><ul><li>Set up and operate printing equipment according to approved recipes and standards, ensuring output quality and consistency.</li><li>Perform pre-press operations for materials, papers, and media and coordinate them to meet task requirements.</li><li>Inspect raw materials and printed products, document results, and raise defect or technical issue reports when needed.</li><li>Collaborate with the production team to adjust speed and accuracy standards and prevent waste.</li><li>Adhere to occupational safety and health procedures and maintain a safe, clean work environment.</li><li>Provide technical support to colleagues and participate in training and mentoring trainees as needed.</li><li>Document procedures and notes to ensure process improvement and provide regular reports to management.</li></ul><h2>Qualifications and Requirements</h2><ul><li>High school diploma or equivalent; preferring an independent technical background.</li><li>2–5 years of practical experience in industrial printing or print production.</li><li>Good reading and writing skills in Arabic; basic English as required for technical needs.</li><li>Ability to work in a team, withstand work pressure, and pay attention to details.</li><li>Ability to read drawings and technical instructions and use basic measuring tools.</li><li>Residence and work in Kuwait, with availability to work in shifts according to a pre-set schedule.</li></ul><h2>Required Skills</h2><ul><li>Printing machine operation skills and basic equipment maintenance.</li><li>High precision in setting adjustments and adherence to approved standards.</li><li>Ability to diagnose technical problems and propose appropriate technical solutions.</li><li>Proficient in reading specifications and technical drawings and linking them to production.</li><li>Effective communication skills and ability to work in a team and document procedures regularly.</li></ul><h2>Benefits and Perks</h2><ul><li>Competitive salary according to experience in Kuwait.</li><li>Internal and external training and professional development opportunities based on performance.</li><li>Social and health insurance in accordance with local laws.</li><li>Supportive work environment and opportunities for career advancement within the printing department and its various sectors.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br>2026-07-09<p><b>Country: </b></p><br>Kuwait<p><b>Location: </b></p><br>KWT01: Al Tijaria Tower, 10th Floor, Al Soor Street, MirqabJob Purpose<p>The role holder supports Service Operations by coordinating field support activities, maintaining operational records, preparing reports and dashboards, supporting process governance, and ensuring timely follow-up of operational activities. The role works closely with field teams, supervisors, customers, and internal stakeholders to improve operational efficiency and service performance.</p><br>Key ResponsibilitiesCore Responsibilities<ul><li>Support field operations through coordination, follow-up, and process administration.</li><li>Maintain operational trackers, records, and documentation.</li><li>Prepare and distribute operational reports, KPI reports, dashboards, and management updates.</li><li>Support customer communication requirements, appointments, and reporting activities.</li><li>Monitor pending actions, operational KPIs, and business processes to support timely completion.</li><li>Support timesheet validation, compliance monitoring, and reporting activities.</li><li>Coordinate with supervisors, finance, sales, and field teams to support operational requirements.</li><li>Maintain data accuracy and support system updates.</li><li>Participate in process improvement, reporting enhancement, and automation initiatives.</li><li>Support regional projects related to service operations, reporting, governance, and continuous improvement.</li></ul>Self-Management<ul><li>Work with the reporting manager to establish and achieve performance objectives.</li><li>Identify development needs and participate in relevant training opportunities.</li><li>Maintain a high level of professionalism, accountability, and customer focus.</li><li>Keep abreast of business processes, technologies, and best practices.</li></ul>Minimum Qualifications, Experience and SkillsMinimum Qualification<ul><li>Diploma or Bachelor's Degree in Business Administration, Engineering, Information Systems, or related field.</li></ul>Years of Experience<ul><li>Minimum 3–5 years of experience in operations support, service coordination, reporting, administration, or related functions.</li></ul>Skills &amp; Experience<ul><li>Experience supporting service or field operations and coordinating with multiple stakeholders.</li><li>Experience in reporting, KPI tracking, dashboard preparation, and process coordination.</li><li>Strong Microsoft Excel skills; Power BI knowledge is preferred.</li><li>Strong analytical, communication, and stakeholder management skills.</li><li>Ability to manage multiple priorities and work independently in a fast-paced environment.</li><li>Experience with operational systems, digital tools, and reporting platforms is an advantage.</li></ul>Language Skills<ul><li>Fluent written and spoken English.</li><li>Arabic is an advantage..</li></ul><p>If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day.&nbsp;</p><br><p>Otis is the world’s leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio.&nbsp;&nbsp;</p><br><p>You may recognize our products in some of the world’s most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company.&nbsp;&nbsp;</p><br><p>When you join Otis, you become part of an innovative global industry leader with a resilient business model. You’ll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you’ll gain working alongside the best and brightest, keep us connected and on the cutting edge. &nbsp;</p><br><p>We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs.&nbsp;&nbsp;&nbsp;</p><br><p>Today, our focus more than ever is on people. As a global, people-powered company, we put people – passengers, customers, and colleagues – at the center of everything we do.&nbsp; We are guided by our values that we call our Three Absolutes – prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here.&nbsp;&nbsp;</p><br><p>Become a part of the Otis team and help us #Buildwhatsnext!&nbsp;</p><br><p><span><i>Otis is An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other protected class according to applicable law. To request an accommodation in completing an employment application due to a special need or a disability, please contact us at careers@otis.com.</i></span></p><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Mechanical Technician</p><br><p><span><strong>Responsibilities:</strong></span></p><br><p><span>-Inspect, repair, maintain, and pressure test Liner Hanger systems and related equipment.<br>-Disassemble, clean, assemble, and refurbish Liner Hanger tools according to OEM procedures.<br>-Diagnose equipment failures and perform troubleshooting and corrective maintenance.<br>-Conduct dimensional inspections, function testing, and quality checks to ensure equipment readiness.<br>-Complete maintenance records, work orders, and inspection documentation accurately.<br>-Ensure compliance with HSE, quality, and operational standards.<br>-Safely operate workshop machinery, lifting equipment, and testing equipment.<br>-Provide technical support and guidance to junior technicians when required.</span></p><br><p><span><strong>Skills:</strong><br>-Liner Hanger equipment maintenance and repair and wellbore cleaning WBC and Cementing Head<br>-Mechanical troubleshooting and failure analysis<br>-Pressure testing and function testing<br>-Assembly and disassembly of downhole tools<br>-Precision measuring and quality inspection<br>-Reading technical drawings and maintenance procedures<br>-Root cause analysis and problem-solving<br>-Strong safety awareness and teamwork</span></p><br><p><span><strong>Qualifications:</strong><br>-Diploma in Engineering or related discipline.<br>-4-6 years of experience in Liner Hanger equipment repair and maintenance within the Oil &amp; Gas industry.<br>-Hands-on experience with hydraulic and mechanical Liner Hanger systems, running tools, packers, and related downhole equipment.<br>-Knowledge of pressure testing, dimensional inspection, and equipment certification processes.<br>-Forklift, crane, or lifting equipment certification preferred.<br>-Ability to work in a workshop and field support environment.<br>-Willingness to travel up to 10% as required.</span></p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job description</p><p><br></p><p>Position: Dental CAD/CAM Technician</p><p><br></p><p>Location: Overseas</p><p><br></p><p><br></p><p>Requirements:</p><p><br></p><p>Minimum 5 years of experience in Dental CAD/CAM</p><p>Diploma in Dental Technology / Dental Mechanics (2 years)</p><p>Valid Dental Technician Professional License</p><p>Expertise in Exocad and/or 3Shape</p><p>Experience in Crown &amp; Bridge Design</p><p>Implant Prosthesis</p><p>Digital Dental Workflow</p><p>STL &amp; CAM Workflow</p><p>Strong communication skills</p><p>Interested candidates should send:</p><p><br></p><p>Updated CV</p><p>Diploma Certificate</p><p>Professional License</p><p>Experience Certificates</p><p>Passport Copy</p><p>Only shortlisted candidates will be contacted.</p><p><br></p><p>Role: Healthcare &amp; Life Sciences - Other</p><p>Industry Type: Recruitment / Staffing</p><p>Department: Healthcare &amp; Life Sciences</p><p>Employment Type: Full Time, Temporary/Contractual</p><p>Role Category: Healthcare &amp; Life Sciences - Other</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 5 years of experience in Dental CAD/CAM</li><li>Diploma in Dental Technology / Dental Mechanics (2 years)</li><li>Valid Dental Technician Professional License</li><li>Expertise in Exocad and/or 3Shape</li><li>Experience in Crown &amp; Bridge Design</li><li>Implant Prosthesis</li><li>Digital Dental Workflow</li><li>STL &amp; CAM Workflow</li><li>Strong communication skills</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a Rig Mechanic Deep Drilling with extensive land rig maintenance experience for our client in Kuwait. Position Overview: The Rig Mechanic Deep Drilling will be responsible for maintaining, troubleshooting, and repairing mechanical systems and equipment on deep drilling land rigs to ensure maximum operational reliability and uptime. Key Responsibilities: Mechanical Maintenance: Perform preventive and corrective maintenance on drilling rig mechanical equipment. Inspect, troubleshoot, and repair mud pumps, drawworks, top drives, rotary systems, and auxiliary equipment. Diagnose mechanical failures and implement effective corrective actions. Ensure equipment operates in accordance with OEM recommendations. Equipment Reliability: Support preventive and predictive maintenance programs. Participate in root cause failure analysis activities. Ensure accurate maintenance documentation and reporting. Assist in minimizing equipment downtime and improving reliability. Compliance &amp; Safety: Comply with company HSE policies and procedures. Participate in safety meetings, inspections, and emergency drills. Ensure safe work practices are followed during maintenance activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Technical Diploma in Mechanical Engineering or related discipline.</li><li>Minimum 5+ years of mechanical maintenance experience on drilling rigs.</li><li>Extensive experience supporting deep drilling land rigs.</li><li>Strong knowledge of drilling rig mechanical systems and equipment.</li><li>Ability to troubleshoot and repair complex mechanical equipment.</li><li>Good communication skills in English.</li></ul><p></p></section>

<p><h4>Job description</h4> <p>The aircraft mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM medical for deployment.</p> <h4>Knowledge & skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements / working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and be responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <p>This role requires the candidate to obtain Disclosure and Barring Service (DBS) check through UK Government prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM Medical for deployment.</p> <h4>Knowledge & Skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</p> <p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p> <p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</p> <p>Working knowledge of technical publications and logistics information systems.</p> <p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</p> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical Requirements / Working Environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</p> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> <p>Will handle dirty parts and lubricants.</p> <p>Will be required to wear proper personal protective equipment (PPE).</p> <p>Must be able to pass a respirator physical and fit test qualification.</p> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> <p>May work in maintenance shop or outside.</p> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> <p>May be exposed to extreme noise from operating equipment.</p> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series. Responsibilities Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: · Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. · Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. · Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. · Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. · Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. · Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. · Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. · Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. · Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</p> </div>

<p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p><strong>Desired Candidate Profile</strong></p><p>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</p><p>Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</p><p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p><p>Safely prepare aircraft for inspections and maintenance checks and services.</p><p>Perform scheduled inspections and assist in performing special inspections.</p><p>Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p><p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p><p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Perform other duties as requested.</p><strong>Minimum Requirements :</strong><p>High School Diploma or Equivalent is required.</p><p>With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required.</p><p>All experience must be within the Five (5) most recent years.</p><p>Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required.</p><p>All experience must be within the Six (6) most recent years.</p><p>U.S. Military Technical school or specialized training course is desired, certification of education level is required.</p><p>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</p><p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</p><p>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</p><strong>Security Clearance Requirements:</strong><p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</p><strong>Additional and Preferred Qualifications :</strong><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p><p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p><p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p><p>Working knowledge of technical publications and Logistics Information Systems.</p><p>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p><p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><strong>Physical Requirements/Working Environment</strong><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to climb stairs, ramps, ladders, and work stands.</p><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p><p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>Will handle dirty parts and lubricants.</p><p>Will be required to wear proper Personal Protective Equipment (PPE).</p><p>Must be able to pass a Respirator Physical and Fit Test qualification.</p><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p><p>Must be able to lift/push/pull minimum of 50 pounds.</p><p>May work in maintenance shop or outside.</p><p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>May be exposed to extreme noise from operating equipment.</p><p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>May be expected to work in austere environments and all-weather conditions</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The Common Support Equipment Technician diagnoses, repairs, and maintains Common Support Equipment (CSE). Responsibilities include troubleshooting malfunctions, performing scheduled and unscheduled maintenance, analyzing maintenance trends, and documenting actions using automated systems. Technicians utilize various diagnostic tools, such as multi-meters and oscilloscopes, to repair mechanical and electronic systems. They also handle fluids, conduct corrosion treatments, manage hazardous materials, and prepare CSE for deployment. The role includes operating and servicing support equipment and tow vehicles, while adhering to safety, Tool Control, and Foreign Object Damage prevention standards at all times. Responsibilities SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times. ESSENTIAL FUNCTIONS + Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. + Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. + Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. + Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. + Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. + Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. + Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. + Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. + Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. + Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. + Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. + Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. + Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). + Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. + Conduct off station maintenance when required. + When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Qualifications MINIMUM REQUIREMENTS / QUALIFICATIONS + Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language. + Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration. + Graduation from a standard four (4) year high school or equivalent (GED). + Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. + Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures). + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing -“I” Level &amp; “O” Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required. + Have a strong knowledge base of Intermediate Level Maintenance business procedures. + Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver’s license. + Must have an in-depth knowledge of technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must have a working knowledge (input and extract data) of computers. + Must be willing and able to work with job required hazardous materials. + Must be willing and able to conduct specialty on the job training. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules.</li><li>Maintains accurate parts inventory during all maintenance activities.</li><li>Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability.</li><li>Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc.</li><li>Diagnoses malfunctions, isolate causes and corrects breaks.</li><li>Tests engine operations, using testing equipment to locate source(s) of malfunction.</li><li>Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices.</li><li>Disassembles and inspects parts for wear, warping, or other defects.</li><li>Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories.</li><li>Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions.</li><li>May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li><li>Highly desired to have a U.S. Passport valid for an additional two years with at least two facing pairs (four total) of blank Visa pages.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Job Overview&nbsp;</strong></span></span></p><br><p><span><span>The <strong>R&amp;M Technician III – Liner Hanger</strong> is responsible for the inspection, maintenance, repair, testing, and refurbishment of Liner Hanger systems and associated downhole tools. The role ensures all equipment is serviced, assembled, and certified in accordance with OEM specifications, company procedures, and customer requirements. This position supports workshop and field operations while maintaining the highest standards of safety, quality, and operational excellence. Senior technicians may provide technical expertise, troubleshoot complex tool failures, and support operational efficiency initiatives.</span></span></p><br><p><span><span><strong>Responsibilities:</strong></span></span></p><br><ul><li><p><span><span>Inspect, repair, maintain, and pressure test Liner Hanger systems and related equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Disassemble, clean, assemble, and refurbish Liner Hanger tools according to OEM procedures.&nbsp;</span></span></p><br></li><li><p><span><span>Diagnose equipment failures and perform troubleshooting and corrective maintenance.&nbsp;</span></span></p><br></li><li><p><span><span>Conduct dimensional inspections, function testing, and quality checks to ensure equipment readiness.&nbsp;</span></span></p><br></li><li><p><span><span>Complete maintenance records, work orders, and inspection documentation accurately.&nbsp;</span></span></p><br></li><li><p><span><span>Ensure compliance with HSE, quality, and operational standards.&nbsp;</span></span></p><br></li><li><p><span><span>Safely operate workshop machinery, lifting equipment, and testing equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Provide technical support and guidance to junior technicians when required.</span></span></p><br></li></ul><p><span><span><strong>Skills:</strong></span></span></p><br><ul><li><p><span><span>Liner Hanger equipment maintenance and repair&nbsp;</span></span></p><br></li><li><p><span><span>Mechanical troubleshooting and failure analysis&nbsp;</span></span></p><br></li><li><p><span><span>Pressure testing and function testing&nbsp;</span></span></p><br></li><li><p><span><span>Assembly and disassembly of downhole tools&nbsp;</span></span></p><br></li><li><p><span><span>Precision measuring and quality inspection&nbsp;</span></span></p><br></li><li><p><span><span>Reading technical drawings and maintenance procedures&nbsp;</span></span></p><br></li><li><p><span><span>Root cause analysis and problem-solving&nbsp;</span></span></p><br></li><li><p><span><span>Strong safety awareness and teamwork</span></span></p><br></li></ul><p><span><span><strong>Qualifications:</strong></span></span></p><br><ul><li><p><span><span>High School Diploma or Technical/Vocational Certificate in Mechanical or related discipline.&nbsp;</span></span></p><br></li><li><p><span><span>4–6 years of experience in Liner Hanger equipment repair and maintenance within the Oil &amp; Gas industry.&nbsp;</span></span></p><br></li><li><p><span><span>Hands-on experience with hydraulic and mechanical Liner Hanger systems, running tools, packers, and related downhole equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Knowledge of pressure testing, dimensional inspection, and equipment certification processes.&nbsp;</span></span></p><br></li><li><p><span><span>Forklift, crane, or lifting equipment certification preferred.&nbsp;</span></span></p><br></li><li><p><span><span>Ability to work in a workshop and field support environment.&nbsp;</span></span></p><br></li><li><p><span><span>Willingness to travel up to 10% as required.</span></span></p><br></li></ul><p><span><span>#LI-MD1</span></span></p><br><br> <p><span>Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation.&nbsp;&nbsp;</span></p><br> <p><span>We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition.&nbsp;&nbsp;</span></p><br> <p><span>Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team.&nbsp;&nbsp;</span></p><br> <p><span>When you join Weatherford, you instantly feel connected to something bigger – a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other’s successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford.&nbsp;</span></p><br> <p><b><span>Join Us:&nbsp;</span></b></p><br> <p><span>Weatherford is producing energy for today and tomorrow- with global opportunities as unlimited as your sense of adventure. Join us to make an impact on our customers, the industry, and the world.&nbsp;&nbsp;</span></p><br> <p><span>Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.</span></p><br> <br> <br> <br><br> </div>

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p><strong>Requirements:</strong></p> <ul> <li>A valid FAA A&P Airframe and Powerplant Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>US citizenship is required to obtain a US government Secret Security Clearance and for facility access.</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Operationally check repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engine to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation using troubleshooting procedures and diagnostic test equipment to identify source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li> <li>Maintain knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid FAA A&P Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain required visas.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments in support of mission operations.</li> </ul> <h4>Medical and Security Clearance Requirements</h4> <ul> <li>All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</li> <li>Must be able to obtain and maintain a US government Secret Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials and authorization.</li> <li>US citizenship is required to hold a US government Secret Clearance and facility credentials and authorization to work at this facility.</li> </ul> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to a height of four feet and be required to lift up to 35 pounds to a height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through email and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul></p><p></p>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness.</p><p>Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform. Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conducts off station maintenance when required. When necessary, perform other duties and functions critical to the support of the program.</p><p>Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma</li><li>Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: I Level &amp; O Level Tire &amp; Wheel certification Hydraulic Contamination certification Collateral Duty Inspector (CDI) qualification Corrosion Prevention and Control and Aircraft Paint qualification I Level Battery Maintenance certification</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.</li><li>Must have a working knowledge of first aid procedures to be used in an emergency.</li><li>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</li><li>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</li><li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li><li>Must have a valid U.S. Driver s License.</li><li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.</li><li>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.</li><li>Have a strong knowledge base of intermediate level maintenance business practices and procedures</li><li>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions.</li><li>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O level, I level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs.</li><li>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance.</li><li>Must have an in-depth knowledge of applicable technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.</li><li>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program.</li><li>Must be willing and able to work with hazardous materials and conduct specialty on-the-job training.</li><li>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.</li><li>Must have a proven ability to work independently with minimal direction.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Carrying out all maintenance activities including the repairing, installation, and removal of equipment. Watchkeeping and cleaning the machinery spaces while considering the safety of personnel, the environment, and equipment to maximize drilling operation efficiency, reliability, and safety of the rig.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>Equipment Maintenance &amp; Operations:</strong> Provide engine and machinery watch keeping duties by monitoring machinery working temperatures and pressures, checking lubricating oil level readings and maintain daily log of all equipment s. Reporting any leaks, abnormal readings, vibrations or sounds to the shift supervisor as soon as possible and leakage shall be treated as a fire risk and dealt with immediately. Lubricate moving parts such as gears, shafts, and bearings on engines and auxiliary equipment. Carry out routine maintenance and minor repairs on the engine room equipment and machinery as directed. Assist with repairs to engines and equipment. Ensure that repairs needed or made are registered in the form of a work order in the company maintenance system Carry out Planned maintenance work orders on time with good quality and record actual work done, inform supervisor and Senior Tool pusher where access to perform work is not granted. Reference OEM manuals when carrying out preventative maintenance or CM work on any rig equipment do not reply solely on the preventative maintenance work instruction.</p><p><strong>Materials &amp; Equipment Keeping:</strong> Carry out stocktaking of maintenance department materials as directed. Maintain all tools and equipment in a clean and serviceable condition. Report damaged tool that require replacement to the Senior Mechanic and remove the damaged tool from service.</p><p><strong>Housekeeping:</strong> Maintain the engine and associated machine spaces and workshop clean and organized, free of hazards prior to &amp; upon completion of the work tasks, or repairs. Machine and switchboard areas to be kept clear of all flammable materials. Disposes debris as per the company s hazardous material segregations policy and as per waste management policy taking into consideration the environmental &amp; safety aspects.</p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Relevant technical certifications and experience in the oil field in related position may be considered instead of an Apprenticeship. At least one (1) year of working experience in drilling and workover operations with a reputable drilling contractor. Preferred to have working experience on Land rigs</p><p><strong>Skills/Competencies Required:</strong> Working knowledge of the English language. Situation Awareness, Communication, Teamwork.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pushing &amp; pulling in accordance with Company procedure. Frequent bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to work in day/night shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Relevant technical certifications and experience in the oil field in related position may be considered instead of an Apprenticeship. At least one (1) year of working experience in drilling and workover operations with a reputable drilling contractor. Preferred to have working experience on Land rigs</p><p><strong>Skills/Competencies Required:</strong> Working knowledge of the English language. Situation Awareness, Communication, Teamwork.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pushing &amp; pulling in accordance with Company procedure. Frequent bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to work in day/night shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p></p></section>