وظائف مهندس طرق

<p>Role &amp; Responsibilities We are seeking experienced Service Engineers, Senior Service Technicians, and Service Technicians for a leading Industrial Service Company in Kuwait specializing in compressed air systems. The candidate should have hands-on experience in maintenance, troubleshooting, overhaul, installation, commissioning, and repair of oil-injected rotary screw air compressors and compressed air dryers.</p><p>Compressor Brands Experience (Any One or More)</p><ul><li>Atlas Copco</li><li>Ingersoll Rand</li><li>Gardner Denver</li><li>Kaeser</li><li>Sullair</li><li>CompAir</li><li>ELGi</li><li>Chicago Pneumatic</li><li>Quincy</li><li>BOGE</li><li>Other internationally recognized industrial compressor brands</li></ul><p>Key Responsibilities</p><ul><li>Preventive and corrective maintenance of rotary screw air compressors.</li><li>Troubleshooting mechanical and electrical faults.</li><li>Major overhaul of compressor packages.</li><li>Airend inspection, repair, and replacement.</li><li>Bearing replacement and mechanical seal replacement.</li><li>Motor replacement and alignment.</li><li>Coupling alignment using dial indicators or laser alignment tools.</li><li>Maintenance of belt-drive and direct-drive compressor systems.</li><li>Oil system and cooling system servicing.</li><li>Replacement of oil separators, oil filters, and air filters.</li><li>Inlet valve, blowdown valve, minimum pressure valve, and thermostatic valve overhaul.</li><li>Solenoid valve troubleshooting and replacement.</li><li>Leak detection and repair.</li><li>Installation and commissioning of compressors after overhaul.</li><li>Performance testing and fault diagnosis.</li><li>Preparation of service reports and customer support documentation.</li></ul><p>Electrical Responsibilities</p><ul><li>Troubleshooting industrial electric motors.</li><li>Working knowledge of Star-Delta starters.</li><li>Experience with Soft Starters.</li><li>Experience with VFD/VSD drives.</li><li>Electrical control panel troubleshooting.</li><li>PLC and electronic compressor controller diagnostics.</li><li>Pressure and temperature sensor troubleshooting.</li><li>Reading and understanding electrical wiring diagrams.</li><li>Electrical fault diagnosis using multimeters and clamp meters.</li></ul><p>Air Dryer Experience</p><ul><li>Refrigerated Air Dryers.</li><li>Heatless Desiccant Dryers.</li><li>Heated Desiccant Dryers.</li><li>Automatic Condensate Drain Systems.</li><li>Air Filtration Systems.</li><li>Moisture Separators.</li><li>Dew Point Controllers.</li></ul><p>Tools Knowledge</p><p>Candidates should be familiar with :</p><ul><li>Dial Indicators</li><li>Laser Alignment Tools</li><li>Torque Wrenches</li><li>Bearing Pullers</li><li>Hydraulic Presses</li><li>Multimeters</li><li>Clamp Meters</li><li>Megger (Insulation Resistance Tester)</li><li>Pressure Gauges</li><li>Infrared Temperature Guns</li><li>Vibration Meters</li></ul><p>Other Requirements</p><ul><li>Good communication skills in English.</li><li>Ability to work independently at customer sites.</li><li>Strong troubleshooting skills.</li><li>Safety-conscious and team-oriented attitude.</li><li>Valid Passport preferred.</li><li>Ready to relocate to Kuwait.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Preferred Candidate Profile</h3><p>Qualification</p><ul><li>ITI Mechanical / Electrical</li><li>Diploma in Mechanical Engineering</li><li>Diploma in Electrical Engineering</li><li>Equivalent Technical Qualification</li></ul><p>Experience</p><ul><li>3 to 15 years of relevant experience in industrial air compressor service and maintenance.</li><li>Hands-on field service experience is mandatory.</li><li>Experience in shutdowns, commissioning, and troubleshooting preferred.</li><li>Gulf experience will be an added advantage.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Position Summary </b></p><br> <p>About Deloitte: When you work for us, you commit to a career at one of the largest and most prestigious professional services firms in the world. We have received numerous awards over the last few years, including Best Employer in the Middle East, and Best Consulting Firm, and the Middle East Training &amp; Development Excellence Award. </p><br> <p><b>Our Purpose </b></p><br> <p>Deloitte makes an impact that matters. Every day we challenge ourselves to do what matters most—for clients, for our people, and for society. We serve clients distinctively, bringing innovative insights, solving complex challenges and unlocking sustainable growth. We inspire our talented professionals to deliver outstanding value to clients, providing an exceptional career experience and an inclusive and collaborative culture. We contribute to society, building confidence and trust in the markets, upholding the integrity of organizations and supporting our communities. </p><br> <p>Our shared values guide the way we behave to make a positive, enduring impact: </p><br> <ul> <li>Lead the way</li> <li>Serve with integrity</li> <li>Take care of each other</li> <li>Foster inclusion</li> <li>Collaborate for measurable impact</li> </ul> <p><b>Audit &amp; Assurance | Senior </b></p><br> <p>During your tenure as a Senior in Audit &amp; Assurance, you will demonstrate and develop your capabilities in the following areas: </p><br> <ul> <li>Builds trust and credibility with stakeholders by seeking to understand their service levels expectations and what matters to them individually.</li> <li>Delivers high quality services by demonstrating a practical awareness of the impact of regulation and risk management on business processes and controls.</li> <li>Takes responsibility for understanding key statistics and industry matters about entity before engagement begins.</li> <li>Adapts template referral instructions to clearly outline the scope of procedures to be performed, including the areas of audit focus. Understands the structure of the group audit and for whom the referral instructions are intended.</li> <li>Liaises effectively with onshore and offshore Centres of Excellence in the delivery of relevant tasks, understanding the scope of work delegated to them and the importance of providing accurate and complete information to them.</li> <li>Assists in tracking deliverables from component auditors and seeks to understand the relevance and importance of these.</li> <li>Appropriately links risks, controls, procedures and findings from allocated sections across the EMS file on a timely basis.</li> <li>Can articulate the audit quality milestones, the ways in which teams demonstrate completeness of milestones, and how the audit quality milestones contribute to audit quality.</li> <li>Understands the rationale behind the timings of the audit plan and is prepared to offer challenge around whether work can be performed earlier in the audit cycle.</li> <li>Prepares documentation by anticipating questions that reviewers may ask and distinguishes accounting judgements and conclusions from auditing judgements and conclusions.</li> <li>Understands that it is important to develop relationships beyond the finance function in order to better understand the entity's business and apply professional skepticism.</li> <li>Has a practical awareness of the risks around the engagement lifecycle and regulatory environment, and relevant practice protection policies.</li> </ul> <p><b>Leadership Capabilities: </b></p><br> <ul> <li>Builds own understanding of our purpose and values; explores opportunities for impact.</li> <li>Demonstrates strong commitment to personal learning and development; acts as a brand ambassador to help attract top talent.</li> <li>Understands expectations and demonstrates personal accountability for keeping performance on track.</li> <li>Actively focuses on developing effective communication and relationship-building skills.</li> <li>Understands how their daily work contributes to the priorities of the team and the business.</li> </ul> <p><b>Qualifications: </b></p><br> <ul> <li>Degree in Accounting or related field. Graduate degree is desired.</li> <li>4+ years of experience in public auditing and accounting, preferably with Big Audit Firms.</li> <li>Supervise staff, inspect client financial records, compile and analyze data, prepare detailed audit reports and resolve accounting research issues.</li> <li>Demonstrate ability to plan and manage engagements and people along with ensuring deliverables meet work plan specifications and deadlines.</li> <li>International accounting qualification is desired: CA, ACCA, or CPA. Preferably CA.</li> <li>Fluent in English (Reading, Speaking and Writing). Preference will be given to Bilingual candidates (Arabic/English). </li> </ul> <p>For further information, and to apply, please visit our website via the “Apply” button below. </p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job description:</b></p><p>About the job</p><p>Project Coordinator</p><p>Job Description</p><p>We are looking for a detail-oriented Project Coordinator to support the delivery of construction projects by ensuring accurate reporting, documentation, and coordination throughout the project lifecycle.</p><p>Responsibilities</p><ul><li>Prepare daily and monthly project progress reports.</li><li>Prepare and maintain Variation Orders (VOs).</li><li>Process subcontractor payment requests and follow up on approvals.</li><li>Maintain project documentation and records.</li><li>Coordinate with project managers, site engineers, subcontractors, and consultants.</li><li>Assist in monitoring project progress and supporting project coordination activities.</li><li>Perform other duties as assigned.</li></ul><p>Requirements</p><ul><li>Bachelor's degree in Engineering or a related field.</li><li>1–2 years of experience in construction industry.</li><li>Proficiency in Microsoft Office (Excel, Word, and Outlook).</li><li>Strong communication and organizational skills.</li><li>Ability to manage multiple tasks in a fast-paced environment.</li><li><b>Must be currently based in Kuwait.</b></li></ul><p>Job Details</p><ul><li>Location: Kuwait</li><li>Industry: Construction</li><li>Experience: 1–2 Years</li></ul><p>Work Location: In person</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><ul><li>Project Coordination</li><li>Document Control</li><li>Progress Reporting</li><li>Microsoft Office</li><li>Communication</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><span >Your Responsibilities</span></p><ul><li>Provide back-office support to the Professional Services team through Roche Field Service solutions, including case creation and dispatching to assigned personnel</li><li>Collaborate with the Service Team Leader to prepare necessary documents and schedule instrument implementations with customers, manage preventive maintenance (PM) schedules, and upload PM reports for invoicing processes for public and private hospitals.</li><li>Manage spare parts by arranging courier services, overseeing spare part inventory, ordering, and collaborating with supply chain for order follow-ups.</li><li>Liaise with various teams to prepare and send necessary documents (urgent letters, site service reports, etc.) to field engineers.</li><li>Collaborate with business partners (e.g., water units, UPS, 3rd-party materials, lab renovation contractors) to track daily pending issues and manage reminders.</li><li>Daily monitoring and updating of internal systems cases for field engineers; open, dispatch, and follow up on cases through to closure.</li><li>Archive both hard and soft copies of service documents and maintain organized filing systems in the office and core map.</li><li>Manage document flow between Roche, and the customers, including contracts, proposals, quotations, and repair requests.</li><li>Control the numbering, sorting, filing, and retrieval of documents produced by the technical team or department to ensure accuracy and security.</li><li>Support the team with petty cash management, handling departmental expenses, and processing documents efficiently.</li></ul><p>Your Opportunity</p><ul><li>Participants build an extensive network within Roche and upskill themselves</li><li>Best possible work environment is designed to foster participants' learning experience</li><li>Participants will have access to senior leaders and will be assigned to a mentor to support their career journey</li><li>Contributing to purpose driven projects and taking responsibilities from day 1</li></ul><p>Who You Are</p><ul><li>You hold a Bachelor degree in Life Sciences, Economy, Business Administration, or any related area</li><li>You are at an early stage in your career. Fresh graduates will be preferred</li><li>Having a basic understanding of healthcare system is preferred</li><li>You are eager to work with diverse cultures</li><li>You are curious and have passion for learning new things, and have high degree of integrity and courage</li><li>You have excellent communication and innovative skills</li><li>You are proficient in English</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>You hold a Bachelor degree in Life Sciences, Economy, Business Administration, or any related area</p><p>You are at an early stage in your career. Fresh graduates will be preferred</p><p>Having a basic understanding of healthcare system is preferred</p><p>You are eager to work with diverse cultures</p><p>You are curious and have passion for learning new things, and have high degree of integrity and courage</p><p>You have excellent communication and innovative skills</p><p>You are proficient in English</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a knowledgeable and proactive Piping Supervisor to join our dynamic team in the Project &amp; Construction Planning industry. This role is essential for ensuring that our piping systems are designed, installed, and maintained according to the highest standards of safety and efficiency. As a Piping Supervisor, you will play a pivotal role in overseeing piping projects, ensuring compliance with industry codes and standards, and fostering a culture of safety and excellence within your team.</p><p>In this position, you will have the opportunity to work closely with skilled professionals and gain hands-on experience in various piping projects. We value continuous learning and professional development, and you will have access to training programs designed to enhance your technical skills and leadership capabilities. Our team culture emphasizes collaboration and innovation, providing you with a supportive environment where your ideas and contributions are valued.</p><p>As you grow in this role, you will have the chance to take on more responsibilities and advance your career within our organization. We believe in recognizing and rewarding talent, and as you demonstrate your expertise in piping knowledge and safety standards, you will be well-positioned for future leadership opportunities. Join us and be part of a forward-thinking company that prioritizes employee growth and development.</p><p><b>Responsibilities:</b></p><ol><li>Supervise the installation and maintenance of piping systems, ensuring compliance with relevant codes and safety standards to guarantee operational efficiency and safety on-site.</li><li>Conduct regular inspections of piping installations, utilizing your expertise to identify potential issues and implement corrective actions to prevent safety hazards.</li><li>Collaborate with project managers and engineers to develop project plans, timelines, and resource allocations that align with project goals and deadlines.</li><li>Provide training and mentorship to junior staff and team members, fostering a culture of continuous improvement and knowledge sharing within the team.</li><li>Maintain accurate documentation of all piping activities, including inspections, maintenance, and compliance reports, to ensure traceability and accountability.</li><li>Coordinate with safety officers to conduct risk assessments and ensure that all safety protocols are followed during piping operations.</li><li>Monitor project budgets and resource utilization, making recommendations for cost-effective solutions that do not compromise safety or quality.</li><li>Engage with clients and stakeholders to communicate project progress, address concerns, and ensure satisfaction with piping services delivered.</li><li>Stay updated on industry trends, codes, and best practices in piping and safety to continuously enhance your knowledge and the team's performance.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong knowledge of piping codes and standards, ensuring compliance in all projects.</li><li>Expertise in safety protocols and risk management within the construction environment.</li><li>Excellent leadership and team management skills to guide diverse teams effectively.</li><li>Proficient in project management tools for planning and monitoring project progress.</li><li>Ability to conduct thorough inspections and assessments of piping systems.</li><li>Strong communication skills to liaise with clients, engineers, and team members.</li><li>Problem-solving skills to identify issues and implement effective solutions quickly.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><strong>Internship Overview</strong></span></p><br> <p><span>The Intern will support the Facilities Management team in the operation, maintenance, and continuous improvement of commercial buildings and warehouse facilities. This role provides hands-on experience in facilities engineering, preventive maintenance, project coordination, asset management, and building operations.</span></p><br> <p><span><strong>Key Responsibilities</strong></span></p><br> <ul> <li><span>Support day-to-day facilities, engineering and maintenance activities.</span></li> <li><span>Assist in planning, coordinating, and monitoring Facilities Management projects.</span></li> <li><span>Participate in site inspections, facility condition assessments, and progress reporting.</span></li> <li><span>Support preventive maintenance planning and asset management activities.</span></li> <li><span>Learn and assist in the use of CAFM/IWMS systems to support Facilities Management operations.</span></li> <li><span>Assist with engineering drawings, technical documentation, and project coordination tasks.</span></li> <li><span>Support building operations and maintenance activities for commercial and warehouse facilities.</span></li> <li><span>Ensure compliance with Health, Safety, and Environment (HSE) requirements and engineering best practices.</span></li> <li><span>Contribute to sustainability and continuous improvement initiatives.</span></li> <li><span>Shadow Facilities Engineers to gain practical knowledge and hands-on experience in Facilities Management.</span></li> <li><span>Perform other duties as assigned by the Facilities Management team.</span></li> </ul> <p><span><strong><span>Candidate Requirements</span></strong></span></p><br> <ul> <li><span>Fresh graduate with a <strong>Bachelor’s Degree in Electrical Engineering</strong>.</span></li> <li><span>Strong interest in Facilities Management, building operations, maintenance, and engineering projects.</span></li> <li><span>Basic understanding of electrical systems, building services, and maintenance principles.</span></li> <li><span>Proficient in Microsoft Office applications (Excel, Word, and PowerPoint).</span></li> <li><span>Strong analytical and problem-solving skills.</span></li> <li><span>Excellent communication and interpersonal skills.</span></li> <li><span>Ability to work effectively both independently and as part of a team.</span></li> <li><span>Eagerness to learn and develop within a professional Facilities Management environment.</span></li> </ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a motivated and creative Junior Landscape Designer to join our growing team. The successful candidate will support the design department by preparing landscape concepts, technical drawings, 3D visualizations, and presentation materials for residential and commercial landscape projects. The ideal candidate is passionate about landscape design, has a strong eye for detail, is eager to learn, and is comfortable using modern design technologies, including AI tools, to improve productivity and design quality.</p><p>Key Responsibilities:</p><ul><li>Prepare landscape concept designs and detailed landscape plans.</li><li>Produce accurate AutoCAD drawings and construction details.</li><li>Create high-quality 3D models using SketchUp.</li><li>Produce realistic renderings and animations using Lumion.</li><li>Prepare presentation boards using Photoshop.</li><li>Assist with plant selection, hardscape materials, and outdoor furniture layouts.</li><li>Coordinate with senior designers and project engineers during design development.</li><li>Revise drawings based on client and management feedback.</li><li>Attend site visits when required to verify site conditions and support project execution.</li><li>Maintain organized project files and documentation.</li><li>Utilize AI tools to improve design workflows, visualization, productivity, and presentation quality.</li><li>Experience using AI tools for design, visualization, image enhancement, presentations, or workflow automation.</li></ul><p>Software Skills:</p><ul><li>AutoCAD</li><li>SketchUp</li><li>Lumion</li><li>Adobe Photoshop</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Landscape Architecture, Architecture, or a related field</li><li>1 3 years of experience in landscape design</li><li>Experience working in the GCC is highly preferred</li><li>Experience using AI tools for design, visualization, image enhancement, presentations, or workflow automation</li><li>Indian nationals preferred</li><li>We are open to hire from GCC &amp; India.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Architecture &amp; Development: Architect, develop, and maintain robust, scalable, and secure front-end applications using Angular (latest versions). Data Visualization: Build high-performance dashboards capable of handling real-time, high-frequency data streams, time-series data, and complex industrial charting. Technical Leadership: Mentoring junior/mid-level developers, establishing front-end coding standards, conducting rigorous code reviews, and driving UI/UX best practices. Collaboration: Work closely with product managers, data scientists, backend engineers, and industrial domain experts to translate complex operational requirements into clean interfaces. Performance Optimization: Optimize application performance for maximum speed, scalability, and seamless rendering of massive datasets. Modernization: Drive the migration of legacy front-end systems into modern, modular Angular architectures (e.g., Micro-frontends, Monorepos).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 10+ years of professional software development experience, with a strict focus on front-end technologies.</li><li>Angular Expertise: 6+ years of deep, hands-on experience with Angular (including RxJS, NgRx/state management, Angular CLI, and standalone components).</li><li>Core Web Tech: Mastery of JavaScript (ES6+), TypeScript, HTML5, and advanced CSS/SASS.</li><li>Testing &amp; CI/CD: Strong experience with front-end testing frameworks (Jest, Cypress, Karma) and integrating front-end builds into CI/CD pipelines.</li><li>Data &amp; APIs: Proficient in consuming complex RESTful APIs and WebSocket connections for real-time data streaming.</li><li>Good communication with English</li><li>Good problem-solving skills</li><li>Good documentation skills</li><li>Flexible to travel to Kuwait</li><li>Experience working as oil and gas domain is preferred</li><li>Landmark Business Domain is preferred</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Rig Liaisonman acts as the primary link between the drilling rig site, the Drilling &amp; Technical Department (DTD), Saudi Aramco representatives, and the contractor.<br> The position is responsible for coordinating rig activities, monitoring operational performance, ensuring compliance with approved drilling programs and Saudi Aramco requirements, and facilitating timely communication and resolution of operational issues.<br> Key Responsibilities Serve as the main liaison between the rig site, DTD, Saudi Aramco representatives, and drilling contractors.<br> Coordinate daily drilling and rig-related activities with relevant departments and stakeholders.<br> Monitor rig operations to ensure compliance with approved drilling programs, procedures, safety standards, and client requirements.<br> Review and communicate daily drilling reports, operational updates, equipment status, and performance information.<br> Follow up on rig activities, operational challenges, equipment issues, and required corrective actions.<br> Coordinate with drilling engineers, rig management, wellsite supervisors, service companies, and other stakeholders.<br> Escalate operational, technical, safety, and schedule-related issues to the appropriate DTD personnel.<br> Assist in ensuring that drilling operations remain aligned with the approved program and project schedule.<br> Track the status of rig moves, rig readiness, equipment availability, maintenance requirements, and operational priorities.<br> Support coordination of logistics, materials, personnel, services, and other resources required for rig operations.<br> Participate in meetings, operational reviews, coordination meetings, and incident investigations when required.<br> Maintain accurate records and provide regular updates to DTD management.<br> Bachelor’s degree or diploma in Drilling Engineering, Petroleum Engineering, Mechanical Engineering, or a related discipline ; or equivalent relevant experience.<br> Typically 8–15 years of experience in drilling and rig operations , preferably in the oil and gas industry.<br> Previous experience working with Saudi Aramco operations or Saudi Aramco-approved contractors is highly preferred.<br> Strong knowledge of land rig operations, drilling activities, wellsite coordination, and oilfield services.<br> Experience liaising with drilling contractors, service companies, client representatives, and technical departments.<br> Familiarity with Saudi Aramco safety, operational, and reporting requirements.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>At Roche you can show up as yourself, embraced for the unique qualities you bring. Our culture encourages personal expression, open dialogue, and genuine connections, &nbsp;where you are valued, accepted and respected for who you are, allowing you to thrive both personally and professionally. This is how we aim to prevent, stop and cure diseases and ensure everyone has access to healthcare today and for generations to come. Join Roche, where every voice matters.</p><br>The Position<p>The Roche Kuwait early in career Program is a 12 months rotational development program at Roche. The program is tailored for high potential individuals at an early stage of their career, and No work experience is required. The program accelerates their professional development and enables them to be key contributors to Roche's purpose and what patients need next.</p><br><p><b>Roche Kuwait offers Professional Service Administrator position for a period of 11 months and one month rotation with the below main responsibilities:&nbsp;</b></p><br><p><b>Your Responsibilities</b></p><br><ul><li><p>Provide back-office support to the Professional Services team through Roche Field Service solutions, including case creation and dispatching to assigned personnel</p><br></li><li><p>Collaborate with the Service Team Leader to prepare necessary documents and schedule instrument implementations with customers, manage preventive maintenance (PM) schedules, and upload PM reports for invoicing processes for public and private hospitals.</p><br></li><li><p>Manage spare parts by arranging courier services, overseeing spare part inventory, ordering, and collaborating with supply chain for order follow-ups.</p><br></li><li><p>Liaise with various teams to prepare and send necessary documents (urgent letters, site service reports, etc.) to field engineers.</p><br></li><li><p>Collaborate with business partners (e.g., water units, UPS, 3rd-party materials, lab renovation contractors) to track daily pending issues and manage reminders.</p><br></li><li><p>Daily monitoring and updating of internal systems cases for field engineers; open, dispatch, and follow up on cases through to closure.</p><br></li><li><p>Archive both hard and soft copies of service documents and maintain organized filing systems in the office and core map.</p><br></li><li><p>Manage document flow between Roche, and the customers, including contracts, proposals, quotations, and repair requests.</p><br></li><li><p>Control the numbering, sorting, filing, and retrieval of documents produced by the technical team or department to ensure accuracy and security.</p><br></li><li><p>Support the team with petty cash management, handling departmental expenses, and processing documents efficiently.</p><br></li></ul><p><b>Your Opportunity</b></p><br><ul><li><p>Participants build an extensive network within Roche and upskill themselves</p><br></li><li><p>Best possible work environment is designed to foster participants' learning experience</p><br></li><li><p>Participants will have access to senior leaders and will be assigned to a mentor to support their career journey</p><br></li><li><p>Contributing to purpose driven projects and taking responsibilities from day 1</p><br></li></ul><p><b>Who You Are</b></p><br><ul><li><p>You hold a Bachelor degree in Life Sciences, Economy, Business Administration, or any related area</p><br></li><li><p>You are at an early stage in your career. Fresh graduates will be preferred</p><br></li><li><p>Having a basic understanding of healthcare system is preferred</p><br></li><li><p>You are eager to work with diverse cultures</p><br></li><li><p>You are curious and have passion for learning new things, and have high degree of integrity and courage</p><br></li><li><p>You have excellent communication and innovative skills</p><br></li><li><p>You are proficient in English</p><br></li></ul><p><b>Our mission</b></p><br><p>Roche is a global pioneer and leader in Personalized Healthcare. We provide breakthrough differentiated medicines and diagnostic tests using expertise in Science, Technology and Data so that people can live better lives. We believe it’s urgent to deliver medical solutions right now – even as we develop innovations for the future. We commit ourselves to scientific rigor, unassailable ethics, and access to medical innovations for all.</p><br><p>We are living in truly historic times. The rapid digitalization of healthcare fuels an accelerated transformation in our industry. This change requires leaders who are entrepreneurial, who trust and encourage teams to take risks, learn and progress quickly.</p><br><p><b>Program Characteristics/Scope </b></p><br><ul><li><p>A rotational talent development program</p><br></li><li><p>12 months in different disciplines</p><br></li></ul>Who we are<p>A healthier future drives us to innovate. Together, more than 100’000 employees across the globe are dedicated to advance science, ensuring everyone has access to healthcare today and for generations to come. Our efforts result in more than 26 million people treated with our medicines and over 30 billion tests conducted using our Diagnostics products. We empower each other to explore new possibilities, foster creativity, and keep our ambitions high, so we can deliver life-changing healthcare solutions that make a global impact.</p><br><p><br>Let’s build a healthier future, together.</p><br><p><b>Roche is an Equal Opportunity Employer.</b></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Rig Liaisonman acts as the primary link between the drilling rig site, the Drilling &amp; Technical Department (DTD), Saudi Aramco representatives, and the contractor.<br> The position is responsible for coordinating rig activities, monitoring operational performance, ensuring compliance with approved drilling programs and Saudi Aramco requirements, and facilitating timely communication and resolution of operational issues.<br> Key Responsibilities Serve as the main liaison between the rig site, DTD, Saudi Aramco representatives, and drilling contractors.<br> Coordinate daily drilling and rig-related activities with relevant departments and stakeholders.<br> Monitor rig operations to ensure compliance with approved drilling programs, procedures, safety standards, and client requirements.<br> Review and communicate daily drilling reports, operational updates, equipment status, and performance information.<br> Follow up on rig activities, operational challenges, equipment issues, and required corrective actions.<br> Coordinate with drilling engineers, rig management, wellsite supervisors, service companies, and other stakeholders.<br> Escalate operational, technical, safety, and schedule-related issues to the appropriate DTD personnel.<br> Assist in ensuring that drilling operations remain aligned with the approved program and project schedule.<br> Track the status of rig moves, rig readiness, equipment availability, maintenance requirements, and operational priorities.<br> Support coordination of logistics, materials, personnel, services, and other resources required for rig operations.<br> Participate in meetings, operational reviews, coordination meetings, and incident investigations when required.<br> Maintain accurate records and provide regular updates to DTD management.<br> Bachelor’s degree or diploma in Drilling Engineering, Petroleum Engineering, Mechanical Engineering, or a related discipline ; or equivalent relevant experience.<br> Typically 8–15 years of experience in drilling and rig operations , preferably in the oil and gas industry.<br> Previous experience working with Saudi Aramco operations or Saudi Aramco-approved contractors is highly preferred.<br> Strong knowledge of land rig operations, drilling activities, wellsite coordination, and oilfield services.<br> Experience liaising with drilling contractors, service companies, client representatives, and technical departments.<br> Familiarity with Saudi Aramco safety, operational, and reporting requirements.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Rig Manager Deep Drilling We are currently looking for a Rig Manager Deep Drilling Land Rigs (3000 HP / HPHT) to join our client's operations in Kuwait. Position Overview: The Rig Manager Deep Drilling will be responsible for the safe, efficient, and cost-effective execution of drilling operations on deep drilling land rigs in Kuwait. The role will provide overall leadership for rig operations, ensuring operational excellence, equipment reliability, and compliance with company and regulatory requirements. Key Responsibilities: Rig Operations: Direct and oversee all drilling and rig operations to ensure safe and efficient execution. Ensure drilling activities are performed in accordance with approved drilling programs and operational procedures. Monitor rig performance and optimize operational efficiency while minimizing non-productive time (NPT). Coordinate daily drilling activities with Drilling Superintendents and onshore support teams. Ensure proper well control practices are maintained at all times. Operational Excellence: Drive continuous improvement initiatives to enhance drilling performance and equipment utilization. Monitor operational KPIs and implement corrective actions when required. Coordinate with maintenance teams to ensure timely repairs and preventive maintenance activities. Compliance &amp; Safety: Ensure compliance with company HSE policies, industry standards, and regulatory requirements. Promote a strong safety culture and ensure adherence to well control procedures. Lead incident investigations and implement corrective actions. Participate in audits, inspections, and emergency response activities. Leadership: Lead and supervise all rig personnel and contractors on site. Mentor and develop crew competency through training and coaching. Coordinate with Toolpushers, Drilling Engineers, service companies, and contractors. Foster effective collaboration within multicultural work environments.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree or Technical Diploma in Petroleum, Mechanical Engineering, or related discipline.</li><li>Minimum 8+ years of drilling rig operations experience.</li><li>At least 3 years in a Rig Manager, Senior Toolpusher, or equivalent leadership role.</li><li>Extensive experience supporting deep drilling land rigs (3000HP, HPHT, and complex drilling operations).</li><li>Strong understanding of drilling operations, well control, and rig equipment.</li><li>Current IWCF or IADC WellSharp certification is preferred.</li><li>Excellent communication and leadership skills in English.</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li></ul><p></p></section>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a dedicated and experienced Foreman in the Civil sector to join our dynamic team in Kuwait. This role is pivotal in overseeing construction projects, ensuring they are completed on time, within budget, and to the highest standards of quality. As a Foreman, you will play a crucial role in coordinating the efforts of various teams, managing resources, and maintaining a safe work environment. Your expertise will guide the team, fostering a culture of collaboration and excellence.</p><p>In this position, you will have the opportunity to grow your career within a supportive environment that values continuous learning and professional development. Our company is committed to investing in our employees, offering training programs and mentorship opportunities to enhance your skills and knowledge in the field. You will be part of a team that prioritizes safety, innovation, and efficiency, enabling you to make a significant impact on our projects and the community.</p><p>As you take on this leadership role, you will be responsible for implementing best practices and ensuring compliance with industry standards. Your ability to communicate effectively with team members and stakeholders will be essential in driving project success. Join us and be a part of a forward-thinking organization that recognizes and rewards hard work, paving the way for your advancement in the civil construction industry.</p><p><b>Responsibilities:</b></p><ol><li>Oversee daily operations on construction sites, ensuring adherence to project plans and specifications while maintaining safety protocols and quality standards.</li><li>Coordinate with subcontractors and suppliers to ensure timely delivery of materials and services, optimizing workflow and minimizing delays.</li><li>Conduct regular inspections of work processes and site conditions, identifying potential issues and implementing corrective actions to maintain project timelines.</li><li>Manage and mentor a team of construction workers, providing guidance and support to enhance their skills and productivity.</li><li>Prepare and maintain detailed project documentation, including progress reports, schedules, and budgets, to ensure transparency and accountability.</li><li>Collaborate with project managers and engineers to develop strategies for efficient resource allocation and risk management throughout the project lifecycle.</li><li>Facilitate effective communication between all parties involved in the project, ensuring everyone is informed of updates and changes to plans.</li><li>Implement and enforce health and safety regulations on-site, conducting safety meetings and training sessions to promote a culture of safety.</li><li>Analyze project performance and provide recommendations for improvements, leveraging lessons learned to enhance future project execution.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong leadership skills to effectively manage and motivate a diverse team of construction professionals.</li><li>Excellent communication skills, both verbal and written, to facilitate collaboration and convey critical information.</li><li>Proficient in project management software and tools to track progress and manage resources efficiently.</li><li>In-depth knowledge of civil construction processes and safety regulations to ensure compliance and quality.</li><li>Problem-solving abilities to address challenges and implement effective solutions on-site.</li><li>Time management skills to prioritize tasks and meet deadlines without compromising quality.</li><li>Ability to read and interpret blueprints and technical drawings, translating them into actionable plans for the team.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Electrical Maintenance Manager - Residential for our client in Kuwait. Position Overview: The Electrical Maintenance Manager is responsible for planning, directing, and managing all electrical maintenance activities for a fleet of onshore drilling rigs and associated equipment. Key Responsibilities: Maintenance Management: Develop, implement, and continuously improve preventive, predictive, and corrective electrical maintenance programs for land drilling rigs. Ensure maximum reliability and availability of drilling electrical systems and associated equipment. Plan and supervise major electrical overhauls, rig upgrades, and refurbishment projects. Review equipment performance and implement reliability improvement initiatives. Monitor equipment failures and perform root cause failure analysis (RCFA) to eliminate recurring issues. Ensure maintenance activities comply with OEM recommendations and industry best practices. Fleet Support: Provide technical support to multiple onshore drilling rigs. Coordinate troubleshooting of complex electrical failures affecting drilling operations. Monitor rig electrical KPIs including equipment availability, MTBF, MTTR, and maintenance compliance. Conduct periodic inspections and audits of rig electrical systems. Standardize maintenance procedures across the drilling fleet. Equipments: Responsible for electrical maintenance of: SCR and AC/VFD drilling rigs, Rig power generation systems, Diesel generators, Motor Control Centers (MCC), Variable Frequency Drives (VFD), Silicon Controlled Rectifier (SCR) systems, Top Drive electrical systems, Drawworks electrical systems, Mud pump electrical systems, Rotary equipment, Air compressors, Lighting systems, Rig camp electrical distribution systems, High and low voltage distribution systems, UPS systems, PLC and control systems, Instrumentation interfaces, Emergency shutdown systems, Rig communication systems, Electrical protection systems. Planning &amp; Asset Management: Develop annual electrical maintenance plans and budgets. Manage spare parts inventory and critical electrical components. Coordinate procurement of electrical materials and services. Optimize maintenance costs while maintaining equipment reliability. Maintain accurate maintenance records using a Computerized Maintenance Management System (CMMS). Leadership: Lead, mentor, and supervise Electrical Superintendents, Electrical Supervisors, Electrical Engineers, and field electricians. Allocate manpower effectively across multiple drilling rigs. Conduct performance evaluations and competency assessments. Identify training needs and develop technical competency programs. HSE &amp; Compliance: Ensure compliance with company HSE policies and client requirements. Promote a strong electrical safety culture. Ensure compliance with: Lock Out/Tag Out (LOTO) Electrical isolation procedures Permit to Work (PTW) Hazard identification and risk assessment Safe electrical work practices Participate in incident investigations and implement corrective actions. Ensure compliance with applicable electrical codes and standards. Quality &amp; Continuous Improvement: Develop and update electrical maintenance procedures. Conduct reliability analysis and continuous improvement initiatives. Evaluate new technologies to improve drilling equipment reliability. Support rig commissioning, acceptance testing, and startup activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications:</b></p><p>Bachelor's Degree in Electrical Engineering or equivalent. Professional certifications in electrical engineering or maintenance management are advantageous. Experience of 8+ years of electrical maintenance experience in the oil and gas drilling industry with minimum 5 years in a managerial or superintendent-level position. Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred. Experience managing electrical maintenance across multiple drilling rigs. Strong knowledge of AC and SCR drilling rig electrical systems. Experience working in GCC/Middle East drilling operations is highly desirable.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Solution Engineering Manager Siemens Grid Software Location: Kuwait City, Kuwait About the role: This is a senior leadership role at the intersection of engineering excellence and regional energy transformation. As Solution Engineering Manager, you will be the driving force behind the technical delivery of Siemens Grid Software portfolio overseeing multidisciplinary teams and managing a portfolio of high-impact infrastructure projects that directly support national agendas, including Kuwait Vision and broader grid modernization programs. Key Responsibilities Lead end-to-end technical execution of Grid Software projects in Kuwait, ensuring delivery on time, within scope, budget, and quality standards Define project objectives, technical scope, resource allocation, and delivery strategies in collaboration with key stakeholders Drive engineering best practices through the reuse of standard components, templates, and proven delivery frameworks Ensure full compliance with Siemens architectural standards, technical governance, cybersecurity requirements, and EHS policies Represent Siemens in senior-level engagements with government entities, utilities, EPC contractors, and strategic partners Support pre-sales activities, strategic customer engagements, and long-term account retention initiatives Contribute to regional go-to-market strategy and business development planning in alignment with sales and regional management Build and maintain trusted relationships with customers, partners, vendors, and internal stakeholders at all levels Lead and coordinate internal engineering resources, project managers, lifecycle teams, and third-party vendors across geographically distributed teams Coach and develop Technical Project Leads, Engineers, and delivery teams fostering a high-performance, collaborative culture Monitor project performance through robust reporting, scheduling, and quality management mechanism Identify, manage, and resolve technical risks, bottlenecks, and escalation topics throughout the project lifecycle Oversee budget accountability and P&amp;L contribution for the territory's engineering portfolio Lead operational improvement initiatives and support business transformation programs within the territory Manage scope, schedule, and cost changes using structured governance and changing control processes Collaborate with global component teams to ensure alignment with Siemens' architectural and delivery standards</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Your Profile Bachelor s degree in electrical engineering, Electronic Engineering, Telecommunications, Computer Science, IT, or a related technical discipline 10 15 years of progressive experience in project execution and engineering leadership, with a focus on medium to large-scale infrastructure or Grid Software projects Proven track record leading multicultural, multidisciplinary engineering and project management teams in international environments Strong background in the Transmission and Distribution sector, with expertise in SCADA systems, IT/OT integration, digitalization, IoT, and cybersecurity Deep technical knowledge of Substation Automation and Telecommunication Systems, including familiarity with Siemens and competitor solutions Experience managing matrix organizations and navigating complex, multi-stakeholder project environments Experience working within Kuwait or broader markets is strongly preferred Established network and familiarity with Kuwait utilities, transmission operators, or government entities is a distinct advantage Understanding of regional regulatory, procurement, and project delivery frameworks in Kuwait and in the Gulf Exceptional communication, stakeholder management, negotiation, and executive presentation skills Demonstrated passion for developing people, coaching technical teams, and building high-performance cultures Strong commercial acumen with solid understanding of project controlling, scheduling, and corrective action frameworks Fluent in English (written and spoken) while Arabic language is highly advantageous</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Projects Manager is responsible for the end-to-end development, planning, execution, and</p><p>delivery of oil and gas services projects at customer sites. This role holds full ownership of the</p><p>project lifecycle from marketing, initial scoping and mobilization through execution, close-out,</p><p>and customer handover ensuring projects are delivered safely, on time, within budget, and to</p><p>the required quality and technical standards.</p><p>Key Responsibilities</p><p>1. Business Development</p><p> Get acquainted with the applications and projects of interest</p><p> Identify potential customers for the relevant projects</p><p> Establish a network of relationships to, prepare necessary presentations, and</p><p>coordinate with other colleagues to ensure alignment</p><p><br></p><p>2. Project Planning</p><p> detailed project execution plans, schedules, and resource plans for services</p><p>projects at customer/client sites.</p><p> Review contract scope, technical specifications, and customer requirements to</p><p>define project deliverables.</p><p> Identify equipment, personnel, materials, and logistics requirements ahead of</p><p>mobilization.</p><p> Prepare risk assessments, HSE plans, and job safety analyses (JSAs) in</p><p>coordination with QHSE teams.</p><p> Develop project budgets and cost estimates; align with commercial/contracts</p><p>teams on scope and pricing.</p><p>3. Project Execution &amp;amp; Site Management</p><p> Take full ownership of project execution at client sites, acting as the primary</p><p>point of accountability.</p><p> Mobilize crews, equipment, and subcontractors in line with the project schedule.</p><p> Supervise and coordinate field teams, service engineers, technicians, and third-</p><p>party contractors on-site.</p><p> Ensure all work is carried out in compliance with HSE regulations, client site</p><p>requirements, and company QHSE policies.</p><p> Monitor daily progress against plan; proactively resolve technical, logistical, or</p><p>personnel issues that arise on-site.</p><p> Act as the primary interface between the company and the client&amp;#39;s site</p><p>representatives during execution.</p><p>4. Process Ownership &amp;amp; Governance</p><p> Own the project management process end-to-end, ensuring adherence to</p><p>internal SOPs, quality management systems, and client contractual</p><p>requirements.</p><p> Maintain full documentation trail: work orders, daily progress reports,</p><p>timesheets, material consumption, non-conformance reports, and close-out</p><p>reports.</p><p><br></p><p> Ensure proper handover procedures, punch-list closure, and customer sign-off</p><p>at project completion.</p><p> Drive continuous improvement of project delivery processes based on lessons</p><p>learned.</p><p><br></p><p>5. Cost, Schedule &amp;amp; Performance Control</p><p> Monitor project costs against budget; report variances and implement</p><p>corrective actions.</p><p> Track project KPIs: schedule adherence, cost performance, HSE incidents,</p><p>quality metrics, and customer satisfaction.</p><p> Prepare and present regular project status reports to management and clients.</p><p> Manage change orders, scope variations, and their commercial/schedule</p><p>impact.</p><p><br></p><p>6. HSE &amp;amp; Compliance</p><p> Ensure all site personnel comply with company and client HSE standards and</p><p>permit-to-work systems.</p><p> Conduct or oversee site HSE inductions, toolbox talks, and safety audits.</p><p> Investigate and report incidents, near-misses, and non-conformances;</p><p>implement corrective/preventive actions.</p><p> Ensure compliance with local regulatory requirements at all project sites.</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Key Qualifications</p><p><br></p><p> Bachelor&amp;#39;s degree in Engineering (Mechanical, Petroleum, Chemical, or related</p><p>field); PMP or equivalent project management certification preferred.</p><p> 8 to 12+ years of experience in the oil and gas industry, with a minimum of 5</p><p>years in a project management role covering field services execution.</p><p> Proven track record managing service delivery projects at client/well/plant sites</p><p>(e.g., completions, workover, wireline, coiled tubing, chemical services,</p><p>maintenance, or similar service lines).</p><p> Strong knowledge of HSE management systems, permit-to-work processes,</p><p>and industry regulatory frameworks.</p><p> Solid understanding of project cost control, scheduling tools (Primavera P6/MS</p><p>Project), and contract management.</p><p> Experience managing multidisciplinary field teams and third-party contractors.</p><p><br></p><p>Key Skills &amp;amp; Competencies</p><p><br></p><p> Strong leadership and on-site decision-making ability</p><p> End-to-end ownership mindset and accountability for outcomes</p><p> Excellent planning, organizational, and multitasking skills</p><p> Strong client relationship management and communication skills</p><p> Ability to work under pressure and manage competing priorities across multiple</p><p>sites</p><p> Sound commercial and cost-management acumen</p><p> Problem-solving and conflict-resolution skills</p><p><br></p><p> Willingness to travel and work at remote/field locations, including rotational</p><p>schedules if required</p><p>KPI’s &amp;amp; Success Metrics</p><p> Meeting budget</p><p> On-time project delivery rate</p><p> Budget/cost variance performance</p><p> HSE incident rate (LTI, TRIR) on managed projects</p><p> Customer satisfaction and repeat business</p><p> Quality of documentation and process compliance</p></div>