وظائف مهندس تفتيش هندسي في الكويت

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

Project Engineer<br><br> Job Id :100195421<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Project Engineer Required with Civil Engineering Background.<br><br>2-3 years experience is acceptable.<br><br>Knowledge in Dewatering and Shoring will be an added advantage.<br><br>Interested Candidates, please share your CV to mthomas@aptkuwait.com.<br><br>Basic Details<br><br>Location : Mangaf , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : mthomas@aptkuwait.com

<p><b>Role: MEP Engineer</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering, Electrical</p>

<p>Design and Estimate the value of project being tendered as part of the team. Work experience as Design Engineer in MNC Companies like SAIPEM, PETROFAC, TECHNIP, L&amp;T, MCDERMOTT, WOOD, WORLEY, FLUOR etc., would be preferred.</p><p>Role: Tender Manager</p><p><strong>Desired Candidate Profile</strong></p><p>Work experience as Design Engineer in MNC Companies like SAIPEM, PETROFAC, TECHNIP, L&amp;T, MCDERMOTT, WOOD, WORLEY, FLUOR etc., would be preferred.</p>

QC Engineer <br><br> Job Id :100195374<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>???? **URGENT VACANCIES – KUWAIT**<br><br>???? QA/QC Engineer – Mechanical<br><br> Experience: 10–15 years<br><br>???? QA/QC Inspector – E&I<br><br> Experience: 5–10 years<br><br>Industry Experience Required<br><br>Candidates should have relevant experience in **Power, Water, Oil & Gas, and Construction Projects**.<br><br>Required Documents** Updated CV Civil ID Copy Work Permit Copy Passport Copy<br><br>Requirements<br><br>✅ Candidates must be **locally available in Kuwait**<br><br>✅ **Immediate joiners** preferred<br><br>???? **Send your updated CV to:**<br><br>**[career@falghanim.com](mailto:career@falghanim.com)**<br><br>Basic Details<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : career@falghanim.com

<p>Erection Engineer</p><p>&nbsp;</p><p>Bachelor Degree in Electrical Engineering according to Kuwait Bachelor Standard. Atleast 4 Years</p><p>7 Years of Minimum Experience</p><p>&nbsp;</p><p>Key Responsibilities</p><p>Shall have experience in installation of Indoor Gas Insulated Switchgear Substation Projects with exposure of 132KV to 400KV voltage level.&nbsp; Responsible to supervise all the activities at Substation as per Client’s requirement, in concern to complying project task with quality and under required safety measures.&nbsp;&nbsp;</p><p>&nbsp;</p><p>To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HVAC works and to resolve arising site issues.&nbsp;&nbsp;</p><p>&nbsp;</p><p>Shall have good communication skills and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works.</p><p>&nbsp;</p><p>Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, material requisition etc.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Walk-in for Civil Engineer with 10-12 years of experience in Oil &amp; Gas Industries. Minimum 3 years of experience in Middle East Oil &amp; Gas Construction Project is a must.</p></div></section>

<p>Protection Maintenance Engineer</p><p>&nbsp;</p><p>Qualification</p><p>Bachelor Degree in Electrical Engineering according to Kuwait Bachelor Standard. Atleast 4 Years</p><p>10 Years of Minimum Experience</p><p>&nbsp;</p><p>Key Responsibilities</p><p>* Experience in maintenance of protective equipment’s involved in EHV, HV and LV substations.</p><p>* He should have theoretical and practical know how of all types of protection relays including distance protection relays in the substations including testing.</p><p>* He should be able to test and maintain battery charger and electronic circuit.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Production Stimulation Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Stimulation Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations. Offers technical guidance to engineers or technicians assigned to work on a common project. Mentors junior stimulation engineers within Well Services and DCS. Organizes client seminars, understands and catalogues client needs and implements solutions. Is regarded as a stimulation expert within the oilfield community and represents Schlumberger in various and multiple industry forum. Periodic publications in these forums are expected. May participate in recruiting.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>15+</p><p></p></section>

<p>We are seeking a motivated and knowledgeable Mechanical Sales Engineer to join our dynamic sales/BD team. The ideal candidate will leverage their engineering expertise to promote and sell mechanical products and solutions to clients (Petrochemical &amp; Oil refineries), ensuring that our customers receive the best service and support. The Mechanical Sales Engineer will work closely with clients to understand their needs and requirements, develop proposals, and ultimately drive sales growth.</p><p>Key Responsibilities</p><ul><li>Identify and develop new business opportunities across industries such as Oil &amp; Gas, Manufacturing, Construction, and Automotive.</li><li>Build and maintain strong relationships with existing and prospective clients.</li><li>Conduct technical presentations and recommend suitable mechanical solutions based on customer requirements.</li><li>Collaborate with the engineering team to develop customized solutions and prepare technical proposals and quotations.</li><li>Develop and implement sales strategies to achieve revenue targets and expand market presence.</li><li>Conduct market research to identify industry trends, competitor activities, and new business opportunities.</li><li>Manage the complete sales cycle from lead generation to project completion, coordinating with engineering, production, and logistics teams.</li><li>Maintain accurate sales records and prepare regular sales reports and forecasts for management.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelors or master s degree in Mechanical Engineering OR Freshers</li><li>Proven experience as a Sales Engineer or in a similar technical sales role, preferably within the mechanical engineering or manufacturing industry. Freshers are also welcome to apply.</li><li>Strong technical knowledge of mechanical systems, products, and applications.</li><li>Excellent communication, negotiation, and interpersonal skills.</li><li>Ability to work independently and as part of a team.</li><li>Willingness to travel as required to meet clients and attend trade shows or industry events.</li></ul>

<p>Maintenance &amp; Testing Engineer Salary - 400 to 600Kwd (Rs.1,23,000 to 1,85,000) 5 - 7 years of Experience in Low Voltage Switchgear, Transformer, Medium Voltage Switchgear upto 11kv Must have Knowledge of Switchgear, Transformer, Ups &amp; Battery System Required Candidate profile Good knowledge to work as a team leader Good English Speaking Able to lead a team and handle site activities independently Engineering Degree Mandatory Salary Negotiable Location - Kuwait. Perks and benefits Accommodation, Transportation, Medical Insurance</p><p><strong>Desired Candidate Profile</strong></p><p>Good knowledge to work as a team leader Good English Speaking Able to lead a team and handle site activities independently Engineering Degree Mandatory</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Production Stimulation Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Stimulation Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. </p><ul><li>Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process.</li><li>Assist as required with the development of technical job designs for PLs.</li><li>Assist with identifying areas where new and cost effective techniques can be applied.</li><li>Explore opportunities for value-added products and services.</li><li>Consult with Design/Technical Engineer role as required to optimize the technical design.</li><li>Assist in real-time incident response, recovery, and investigation as related to the area of expertise.</li><li>Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise.</li><li>Remain current on new technologies.</li><li>Maintain customer visibility through active participation in professional society activities and calls for papers.</li><li>Understand the competition's technical offering.</li><li>Participate in external technical societies and communities.</li><li>Contribute, write and review technical publications.</li><li>Engage with local universities, Customer institutes and research organizations.</li><li>Offers technical guidance to engineers or technicians assigned to work on a common project. Mentors junior stimulation engineers within Well Services and DCS.<br></li><li>Organizes client seminars, understands and catalogues client needs and implements solutions.<br></li><li>Is regarded as a stimulation expert within the oilfield community and represents Schlumberger in various and multiple industry forum.<br></li><li>Periodic publications in these forums are expected.<br></li><li>May participate in recruiting.</li></ul><p>15+</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<p>Immediate Vacancy @ KUWAIT</p><p>Position: Planning Engineer</p><p>Location: Kuwait</p><p>Qualification: B.E. / B.Tech Electrical / Civil/ Mechanical</p><p>Experience: Minimum 5 Years</p><p>Salary: Negotiable</p><p>Job Description : PMP or Planning Certification 5+ yrs of experience in Project Planning &amp; Scheduling. Primavera P6, MS Project, MS Excel (Advanced)</p><p>Duty Hours: 9 Hours/Day</p><p>Company Provides: Accommodation Transportation</p><p>Long-Term Job Opportunity</p><p>FREE RECRUITMENT</p><p><strong>Desired Candidate Profile</strong></p><ul><li>B.E. / B.Tech Electrical / Civil/ Mechanical</li><li>Minimum 5 Years Experience</li><li>PMP or Planning Certification</li><li>5+ yrs of experience in Project Planning &amp; Scheduling.</li><li>Primavera P6, MS Project, MS Excel (Advanced)</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The SIS Well Placement Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The SIS Well Placement Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. </p><ul><li>Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process.</li><li>Assist as required with the development of technical job designs for PLs.</li><li>Assist with identifying areas where new and cost effective techniques can be applied.</li><li>Explore opportunities for value-added products and services.</li><li>Consult with Design/Technical Engineer role as required to optimize the technical design.</li><li>Assist in real-time incident response, recovery, and investigation as related to the area of expertise.</li><li>Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise.</li><li>Remain current on new technologies.</li><li>Maintain customer visibility through active participation in professional society activities and calls for papers.</li><li>Understand the competition's technical offering.</li><li>Participate in external technical societies and communities.</li><li>Contribute, write and review technical publications.</li><li>Engage with local universities, Customer institutes and research organizations.</li></ul><p>10+</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><p>An Associate s degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field. Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards. I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years. Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems. Must have an Active Secret US Government Clearance. US Citizenship is required to obtain a Secret Clearance.</p>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>An Associate's degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E.</li><li>OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li><li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li><li>I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li><li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li><li>Must have an Active Secret US Government Clearance.</li><li>US Citizenship is required to obtain a Secret Clearance.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Safety Engineer with 10 Years experience in Construction / infrastructure development projects. Preferably experience in Airport, Highway, Roads etc. Must be well knowledge of safety measures in Gulf.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Engineering graduate with minimum 10 Years experience in infrastructure development construction. Good communication skill. Site management, training.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a highly skilled Data Engineer to join our growing team in Kuwait. In this role, you will be responsible for designing, building, and maintaining scalable data pipelines and infrastructure that empower data-driven decision-making across the entire organization. You will work with cutting-edge technologies and collaborate closely with data scientists, analysts, and business stakeholders to unlock the full potential of our data assets.</p><p>The purpose of this role is to architect, develop, and manage robust data pipelines and infrastructure that ensure high availability, quality, and performance of data systems. The Data Engineer will enable seamless data flow, optimize storage and processing costs, reduce latency, and empower business teams with self-service analytics capabilities to drive informed decision-making across the organization in Kuwait.</p><p>Build reliable ETL/ELT data pipelines</p><p>Ensure 99.9% data availability and quality</p><p>Optimize data warehouse performance and cost</p><p>Reduce data processing latency by 30%</p><p>Enable self-service analytics for business teams</p><p>Design and implement scalable data architectures</p><p>Monitor and maintain data pipeline health and reliability</p><p>Collaborate with cross-functional teams to understand data requirements</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>SQL</li><li>Python</li><li>Apache Spark</li><li>Apache Kafka</li><li>Airflow</li><li>AWS/GCP/Azure</li><li>Snowflake/BigQuery/Redshift</li><li>Docker/Kubernetes</li><li>Git</li><li>Data modeling</li></ul><p></p></section>

<p>Urgent Hiring – Project Engineer | Kuwait Engineers India Limited (EIL) is hiring experienced professionals for a client project based in Kuwait. • Location: Client Site, Kuwait Key Responsibilities: • Coordinate engineering and construction activities. • Monitor project progress, schedules, and deliverables. • Liaise with clients, contractors, and multidisciplinary teams. • Ensure compliance with project specifications, quality, HSE, and client requirements. • Prepare and review technical documentation and project reports. • Support project planning, execution, and close-out activities. Preferred Skills: • Strong project coordination and communication skills. • Knowledge of engineering standards and project management practices. • Ability to work in a multidisciplinary team environment. • Proficiency in MS Office and project documentation. Employment Type: • Client Site Deployment (Kuwait)</p><p> • Minimum 10 years of relevant experience • Educational background in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering Experience: • Minimum 10 years of relevant experience in engineering projects. • Experience in project execution, coordination, construction, or maintenance is preferred. Educational Qualification: • Bachelor's Degree in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering. Preferred Industry: • Oil & Gas / Petrochemical / Refinery / EPC / Industrial Projects</p>

<p>Urgent Hiring – Project Engineer | Kuwait Engineers India Limited (EIL) is hiring experienced professionals for a client project based in Kuwait. • Location: Client Site, Kuwait Key Responsibilities: • Coordinate engineering and construction activities. • Monitor project progress, schedules, and deliverables. • Liaise with clients, contractors, and multidisciplinary teams. • Ensure compliance with project specifications, quality, HSE, and client requirements. • Prepare and review technical documentation and project reports. • Support project planning, execution, and close-out activities. Preferred Skills: • Strong project coordination and communication skills. • Knowledge of engineering standards and project management practices. • Ability to work in a multidisciplinary team environment. • Proficiency in MS Office and project documentation. Employment Type: • Client Site Deployment (Kuwait)</p><p> • Minimum 10 years of relevant experience • Educational background in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering Experience: • Minimum 10 years of relevant experience in engineering projects. • Experience in project execution, coordination, construction, or maintenance is preferred. Educational Qualification: • Bachelor's Degree in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering. Preferred Industry: • Oil & Gas / Petrochemical / Refinery / EPC / Industrial Projects</p>