وظائف مهندس تفتيش هندسي في الكويت

<p><h4>Job description</h4> <p>The aircraft mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM medical for deployment.</p> <h4>Knowledge & skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements / working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components. A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access. Operationally checks repaired or modified systems for proper operation. Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment. Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks. Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft. Disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders. Ability to become qualified and perform engine runs for the aircraft type they are assigned to support. Ability to read, write, and interpret technical duties is required. Ability to communicate effectively with all levels of employees throughout the organization. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies. Perform other qualified duties as assigned. Minimum Requirements High school diploma or GED equivalent is Required. A valid (FAA) A&amp;P Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired. Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required. Six (6) months of flight line and overhaul &amp; inspection experience is preferred. Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait). A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa. Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training. May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20) Mechanic Pre-employment Medical Requirements: Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. Security Clearance Requirements: Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility. Physical and Additional Qualifications Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to carry, push or pull up to and may exceed 50 pounds. May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Must be able to distinguish color and judge three dimensional depths. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Must have minimum 20/100 near and far vision, correctable to 20/20. Must be capable of living and working in a potentially hostile environment for an extended period. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</li><li>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</li><li>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</li><li>High school diploma or GED equivalent is Required.</li><li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li><li>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li><li>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li><li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment.</li><li>Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li><li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li><li>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</li><li>Must be able to obtain and maintain a US Govt Secret Security Clearance.</li><li>Must be able to obtain and maintain facility credentials and authorization.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li></ul><p></p></section>

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p>A valid (FAA) A&P Airframe and Powerplant Certificate is required.</p> <p>Seven (7) years’ experience as an (A&P) mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</p> <p>US citizenship is required to obtain a US government secret security clearance and for facility access.</p> <p>Operationally checks repaired or modified systems for proper operation.</p> <p>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</p> <p>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p> <p>Examine engines for oil leaks and listen to operating engines to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.</p> <p>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</p> <p>Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.</p> <p>Disassemble and inspect parts for wear, warping, or other defects.</p> <p>Repair or replace defective engine parts and reassemble and install engine in aircraft.</p> <p>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</p> <p>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</p> <p>Knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</p> <p>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</p> <p>Ability to read, write, and interpret technical duties is required.</p> <p>Ability to communicate effectively with all levels of employees throughout the organization.</p> <p>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid (FAA) A&P Certificate is required.</li> <li>Seven (7) years’ experience as an (A&P) mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul & inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel to Kuwait; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain Kuwait visa.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment. Ability to clear the Army MOD 17 medical is required for deployment to Kuwait and will occur while attending CRC (DIDC) deployment training.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li> </ul> <h4>Mechanic Pre-employment Medical Requirements (AR95-20)</h4> <p>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</p> <h4>Security Clearance Requirements</h4> <p>Must be able to obtain and maintain a US government secret security clearance. Must be able to obtain and maintain facility credentials and authorization. US citizenship is required to hold a US government secret clearance and facility credentials and authorization to work at this facility.</p> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Compensation Details</h4> <p>41.89</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits Overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional Information</h4> <p>Original Posting: 06/05/2026 - Until Filled</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an Equal Opportunity Employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job summary</h4> <p>The C-12/King Air Army transport aircraft mechanic (FAA A&P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p>A valid (FAA) A&P Airframe and Powerplant certificate is required.</p> <p>Seven (7) years’ experience as an (A&P) mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</p> <p>US citizenship is required to obtain a US government secret security clearance, and for facility access.</p> <h4>Responsibilities</h4> <ul> <li>Operationally checks repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engine to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li> <li>Knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid (FAA) A&P certificate is required.</li> <li>Seven (7) years’ experience as an (A&P) mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance, on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with personal identification. (Company will ship toolbox to Kuwait).</li> <li>A valid US passport is required for deployment/travel to Kuwait; passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait visa.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment. Ability to clear the Army MOD 17 medical is required for deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li> <li>(AR95-20) Mechanic pre-employment medical requirements: Medical/physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</li> <li>Security clearance requirements: Must be able to obtain and maintain a US government secret security clearance. Must be able to obtain and maintain facility credentials and authorization. US citizenship is required to hold a US government secret clearance, and facility credentials and authorization to work at this facility.</li> </ul> <h4>Physical and additional qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Must be able to distinguish color and judge three dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Compensation details</h4> <p>41.89 per hour (estimated)</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions and benefits.</p> <h4>Additional information</h4> <p>Original posting date: 06/09/2026 - until filled</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity employer statement</h4> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job summary</h4> <p>The C-12/King Air Army transport aircraft mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <h4>Requirements</h4> <p>A valid FAA A&P Airframe and Powerplant certificate is required.</p> <p>Seven years’ experience as an A&P mechanic with seven years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</p> <p>US citizenship is required to obtain a US government secret security clearance and for facility access.</p> <h4>Responsibilities</h4> <ul> <li>Operationally check repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures such as wings and fuselage, and functional components including rigging, surface controls, plumbing, and hydraulic units using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engines to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation using troubleshooting procedures and diagnostic test equipment to identify the source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engines from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engines in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line stations making repairs short of overhaul required to keep aircraft in safe operating condition.</li> <li>Maintain knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid FAA A&P certificate is required.</li> <li>Seven years’ experience as an A&P mechanic with seven years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft-specific specifications for weight limit.</li> <li>Mechanic tools and toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment and travel; passport must have a minimum of 18 months remaining before expiration and must be able to obtain required visas.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments in support of mission operations.</li> <li>Mechanic pre-employment medical requirements: all personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations and subsequently on a specified periodic basis not to exceed five years.</li> <li>Security clearance requirements: must be able to obtain and maintain a US government secret security clearance and facility credentials and authorization. US citizenship is required.</li> </ul> <h4>Physical and additional qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft-specific specifications for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above and below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to a height of four feet and up to 35 pounds to a height of seven feet.</li> <li>May be required to see aircraft in flight, read dials and gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through email and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Compensation details</h4> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits including 401(k) matching</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement, the McNamara-O'Hara Service Contract Act, or other employment contracts may include different provisions and benefits.</p> <h4>Additional information</h4> <p>Original posting date: 06/10/2026 - until filled.</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity employer statement</h4> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>Typical duties include the following, although specific duties vary by assignment or contract.</p> <ul> <li>Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule.</li> <li>Ensures construction adheres to construction specifications.</li> <li>Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc.). Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required.</li> <li>Logs, references, distributes, and files all related correspondence, drawings, and documents.</li> <li>Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned).</li> <li>Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and SOPs for security, safety, environmental controls, hazardous materials and underground utilities.</li> <li>Visits construction sites and submits required construction reports to monitor progress against schedule/timelines.</li> <li>Cooperates with visiting government and DI personnel conducting official inspection visits and surveys and participates in their briefing or orientation.</li> <li>Provides leadership, mentoring, and professional development to assigned staff.</li> <li>Manages the work of teams to procure and construct work.</li> <li>Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion.</li> <li>Attends meetings as required including design and construction reviews and construction kickoff meetings.</li> <li>Performs other qualified duties as assigned.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of cost controls, contractual and project management of international construction projects.</li> <li>Shall also be versed in the International Building Code, NFPA Fire Codes and the NEC in addition to general construction practices.</li> <li>Knowledge of construction materials, processes, techniques, and methods.</li> <li>Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations.</li> <li>Knowledge of Service Contract Act and Truth in Negotiations Act.</li> <li>Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract.</li> <li>Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA).</li> <li>Knowledge of accounting practices including DynCorp’s disclosed accounting practices.</li> <li>Effective leadership and interpersonal skills.</li> <li>Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps forward operating bases, and major civil projects.</li> <li>Excellent communication and organizational skills are essential.</li> <li>Able to use project and construction management planning and reporting tools such as Microsoft Project and Primavera.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or equivalent.</li> <li>Bachelor’s degree in engineering, construction technology, or construction management (preferred).</li> <li>Must be able to obtain and maintain a Secret Clearance; note US citizenship is required to obtain a Secret Clearance.</li> <li>Minimum seven (7) years of construction field experience in all phases of civil and building construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience.</li> <li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li> <li>Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li> <li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices.</li> <li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li> <li>An EIT or professional certification/project management certification is desired.</li> <li>Additional knowledge/skills may be required by contract or assignment.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Works in a normal office environment with controlled temperature and lighting conditions.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times. ESSENTIAL FUNCTIONS + Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. + Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. + Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. + Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. + Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. + Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. + Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. + Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. + Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. + Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. + Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. + Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. + Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). + Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. + Conduct off station maintenance when required. + When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Qualifications MINIMUM REQUIREMENTS / QUALIFICATIONS + Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language. + Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration. + Graduation from a standard four (4) year high school or equivalent (GED). + Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. + Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures). + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing -“I” Level &amp; “O” Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required. + Have a strong knowledge base of Intermediate Level Maintenance business procedures. + Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver’s license. + Must have an in-depth knowledge of technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must have a working knowledge (input and extract data) of computers. + Must be willing and able to work with job required hazardous materials. + Must be willing and able to conduct specialty on the job training. + Requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Job Overview&nbsp;</strong></span></span></p><br><p><span><span>Weatherford is seeking a skilled and results-driven Field Specialist IV – MPD to join our team. This pivotal role is responsible for optimizing MPD and drilling processes, enhancing efficiency, and driving profitability. The ideal candidate will work closely with country and regional team to ensure accurate reporting and compliance. Additionally, this role plays a key part in conducting Operations safely and with minimal interruption to drilling. The job requires occasional package preparation in the Weatherford base where full compliance to Weatherford performance standards is required.</span></span></p><br><p><span><span><strong>Responsibilities:</strong></span></span></p><br><ul><li><span><span>Conducts maintenance of the Managed Pressure Drilling Services equipment at the job site and workshop when required.</span></span></li><li><span><span>Responsible for managing all aspects of the field/offshore</span></span></li><li><span><span>Directly responsible for the safe delivery of all MPD related services onsite.&nbsp;</span></span></li><li><span><span>On call 24hrs while on site.&nbsp;</span></span></li><li><span><span>Responsible for daily MPD reporting, hydraulic calculations, simulations and supervises shift personnel.</span></span></li><li><span><span>At the discretion of product line management (such as the Engineering Manager, Operations Manager, or their designee) will be responsible for working in the shop. This will include but not limited to green tagging, preparing, and/or assisting with shipping equipment to job site.</span></span></li><li><span><span>Rig up, operate and perform troubleshooting of the Managed Pressure Drilling Services equipment at the job site or workshop, ensure all paperwork and HSE requirements are met and complied with</span></span></li><li><span><span>Perform green tagging, In Casing Test, or other operational activities required on location or in the shop and all documented procedures for the Managed Pressure Drilling Services equipment on location.</span></span></li><li><span><span>Perform all RCD operations and monitoring.</span></span></li><li><span><span>Performs field operations of Managed Pressure Drilling Services equipment including operating the MPD Choke from the Operator’s Panel</span></span></li><li><span><span>Troubleshoot all electrical/electronic components and repair/maintain chokes and other mechanical equipment as necessary.</span></span></li><li><span><span>Completes all the necessary reports/paperwork related to Managed Pressure Drilling Services operations.</span></span></li><li><span><span>Keeps updated on all inspection requirements for the Managed Pressure Drilling Services equipment on the job site and in the shop.</span></span></li><li><span><span>Demonstrate and apply knowledge and understanding of all matters related to the Managed Pressure Drilling Services equipment and accessories.</span></span></li><li><span><span>Provides onsite job support to include but not limited to: mechanical, hydraulic functionality, revision changes, compatibility issues, troubleshooting, system versions, of Managed Pressure Drilling Services components.</span></span></li><li><span><span>Keep updated on Managed Pressure Drilling Services equipment, mechanical and hydraulic equipment manufacturing or regulatory standards.</span></span></li><li><span><span>Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions</span></span></li><li><span><span>Comply with Weatherford and client Quality, Health, Security and Environment (QHSE) procedures and documentation on site for specific shift.</span></span></li><li><span><span>Document all jobs and incidents in the Weatherford Performance Tracking System (WPTS).</span></span></li><li><span><span>Participate in the Permit to Work process.</span></span></li><li><span><span>Actively participate in ToolBox talks.</span></span></li><li><span><span>Must understand and comply with all safety rules and company policies of Weatherford</span></span></li><li><span><span>Required to complete the competency and training requirements identified by Global and Regional Management.</span></span></li><li><span><span>Complete training in order to meet the minimum HSE certification and technical requirements required perform their jobs</span></span></li><li><span><span>Perform all duties regarding Managed Pressure Drilling Services and Weatherford assigned by management or supervisors within the physical demand of the job description.</span></span></li></ul><p><strong>Skills</strong></p><br><ul><li><span><span>Mechanical ability necessary to perform repairs&nbsp;</span></span></li><li><span><span>Excellent Microsoft Outlook, Word and Excel computer skills&nbsp;</span></span></li><li><span><span>Self-motivator, self-starter&nbsp;</span></span></li><li><span><span>Good oral and written communication skills&nbsp;</span></span></li><li><span><span>Must be able to follow instructions Able to work closely with fellow employees</span></span></li><li><span><span>Customer focused.</span></span></li><li><span><span>General understanding of products and their application.&nbsp;</span></span></li><li><span><span>Individual must be adaptive to change, have multi-tasking ability.&nbsp;</span></span></li><li><span><span>Ability to work in a team environment.&nbsp;</span></span></li><li><span><span>Ability to work in high and cold temperature environment&nbsp;</span></span></li><li><span><span>Should be able to work closely with all levels of personnel and outside contractors.</span></span></li></ul><p><strong>Qualifications:</strong></p><br><ul><li><span><span>+5 years related to MPD field experience&nbsp;</span></span></li><li><span><span>Bachelor's degree</span></span></li><li><span><span>Strong MPD knowledge&nbsp;</span></span></li></ul><p><span><span>#LI-MD1</span></span></p><br><br> <p><span>Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation.&nbsp;&nbsp;</span></p><br> <p><span>We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition.&nbsp;&nbsp;</span></p><br> <p><span>Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team.&nbsp;&nbsp;</span></p><br> <p><span>When you join Weatherford, you instantly feel connected to something bigger – a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other’s successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford.&nbsp;</span></p><br> <p><b><span>Join Us:&nbsp;</span></b></p><br> <p><span>Weatherford is producing energy for today and tomorrow- with global opportunities as unlimited as your sense of adventure. Join us to make an impact on our customers, the industry, and the world.&nbsp;&nbsp;</span></p><br> <p><span>Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.</span></p><br> <br> <br> <br><br> </div>

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p><strong>Requirements:</strong></p> <ul> <li>A valid FAA A&P Airframe and Powerplant Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>US citizenship is required to obtain a US government Secret Security Clearance and for facility access.</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Operationally check repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engine to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation using troubleshooting procedures and diagnostic test equipment to identify source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li> <li>Maintain knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid FAA A&P Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain required visas.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments in support of mission operations.</li> </ul> <h4>Medical and Security Clearance Requirements</h4> <ul> <li>All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</li> <li>Must be able to obtain and maintain a US government Secret Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials and authorization.</li> <li>US citizenship is required to hold a US government Secret Clearance and facility credentials and authorization to work at this facility.</li> </ul> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to a height of four feet and be required to lift up to 35 pounds to a height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through email and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Veolia</strong>, a global leader in resource management, seeks a <strong>Control Room Operator</strong> for our <strong>Sulaibiya Waste Water Treatment &amp; Reclamation Plant</strong> in Kuwait.</p><br><p>We specialize in innovative wastewater treatment and reclamation solutions, guided by our values of Responsibility, Solidarity, Respect, Innovation, and Customer Focus.</p><br><p>With a global workforce of 179,000, we're committed to sustainable development and optimizing resources. Join our team at this cutting-edge facility to contribute to environmental sustainability and water management in Kuwait.</p><br><p>At Veolia, you'll work on impactful projects, enjoy growth opportunities, and be part of our mission to lead the ecological transformation in wastewater treatment and reclamation.</p><br><br>Job Description<br><p><strong>Role</strong></p><br><p>Control Room Operator is responsible for the safe and smooth operation of UF/RO reclamation plant, will be part of operation team and will work on shift duty along with process leader. Responsibilities include – but not limited to - monitoring UF/RO system &amp; plant utilities, O&amp;M procedures and activities, evaluating treatment process/plant conditions, report operation conditions and findings, and making process control decisions in coordination with process leader. Control room operator shall work closely and coordinate with process leader, Operation manager and other maintenance discipline supervisors to ensure smooth and effective operation of reclamation plant and to sustain overall plant performance.</p><br><p><strong>RESPONSIBILITIES:</strong></p><br><p>The Control Room Operator shall perform the following and any other tasks as per work requirements:</p><br><ul><li>The position will be functionally reporting to Field Service Lead and one over one to Operation manager.</li><li>Reviews process control operation through inspection of system and plant records, technical data, operating reports and historical trends.</li><li>Investigates, diagnoses, report, and recommends correction of abnormalities occurring in any part of the</li><li>UF/RO plant system or Process or plant utilities to ensure safe operation of the plant as per the stated procedures.</li><li>Shares and escalate the operational observations pertaining to the UF/RO plant process or system control operation to ensure the economical functioning of plant facilities, coordinating operational strategies with Field Service Lead or Manager.</li><li>Responsible for reporting shift operational activities to Field Service Lead and operation manager.</li><li>Responsible for creating safe working area by isolating the equipment/system from potential hazardous source and to authorize work executor to start the work by applying LOTO devices, the execution of the work shall be followed until the completion of the job.</li><li>Responsible for measuring individual UF skid turbidity and RO individual vessel conductivity and maintains records for future reference and control.</li><li>Regular updates to Field Service Lead and Manager and make routine plants walk round to notice any plant anomalies before in time. Responsible for reporting the shift activities to concern discipline responsible for corrective actions.</li><li>Routine monitoring of static and rotary equipment and initiate necessary maintenance works to avoid equipment malfunctioning &amp; damages.</li><li>To work closely with client control room operators to maintain good relationship while on executing the assigned or common tasks.</li><li>Execute assigned tasks efficiently as per the instruction given based on plant process requirement and update the status periodically.</li><li>Responsible for communicate with other discipline responsible on equipment isolation and to initiate the maintenance works, follow up the works until the completion of works.</li><li>Writes comprehensive reports on process control operations as necessary to provide information as may be required by management.</li><li>Demonstrates continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality service.</li><li>Plan and initiate chemical preparation and perform lab analysis deemed necessary for the plant smooth operation and work closely with chemical department on timely and safe completion of chemical preparation,&nbsp;loading &amp; unloading of chemicals.</li><li>Reviews all chemical usage to determine correct chemicals, doses, and application points; carry out necessary tasks related to chemical and water analysis based on process requirement.</li><li>Monitoring of process parameters, online instruments and individual system performances through plant automation system and initiate necessary action.</li><li>Assist Field Service Lead on investigating &amp; troubleshooting the process disturbances, equipment malfunctioning and notify the concern department responsible in time for necessary actions.</li><li>Write shift activities clearly and organized manner in shift log book and the shift activities shall distinctly communicated to shift reliever for further follow-up.</li><li>Responsible for maintaining daily activity log like CIP activity log, Refill chemical log, daily analysis log, etc..</li><li>Apply and follow plant EHS procedures including handling of hazardous chemicals, confined space activities, chemical spill control, LOTO procedure and evacuation &amp; emergency procedures.</li><li>Optimize and assist with the development of operational quality system procedures/guidelines/documents for&nbsp;Water Treatment.</li><li>Ensures to adheres to EHS &amp; Quality processes and procedures, Checks job sites for potential hazards and reports when things against company policies.</li><li>Maintains appropriate housekeeping for plant facilities cooperating with other departments.</li><li>Ability to work independently most of the time, but report to his supervisors.</li><li>Determine the reasons for any malfunctions of systems or components to solve the problem.</li></ul><br>Qualifications<br><p><strong>Q</strong><strong>U</strong><strong>A</strong><strong>LIFICATION &amp; REQUIREMENTS:</strong></p><br><ul><li>Bachelor’s degree in Chemistry or equivalent. Other combinations of experience and education that meet the&nbsp;minimum requirements will be considered</li><li>Work experience of minimum 3-5 years in Waste Water Treatment and Reclamation plant</li><li>Proven experience in UF and RO membrane technology</li><li>Experience in plant automation system like DCS, SCADA and PLC is essential</li><li>Knowledge on plant safety and EHS</li><li>Good communication skills in English. Arabic knowledge advantageous.</li></ul><br>Additional Information<br><p><strong>DESIRED CHARESTERICTS</strong></p><br><ul><li>Ability to work per priority, dealing with complexity and result driven</li><li>Experience in working with small group of team members</li><li>Work experience in any large Water treatment plant process, Chemical, O&amp;G plants or Power plants.</li><li>Shall possess excellent interpersonal skills and shall be a good team player</li></ul><p><strong>As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.</strong></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Job Details / Position Summary The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness. Description: • Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform.• Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data• Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.• Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals.• Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications.• Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins.• Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. • Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance.• Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system.• Performs close tolerance adjustment, repair and rework of equipment in and out of shop area.• Services, inspects and tests aviation support equipment used for direct and indirect aircraft support.• Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type.• Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE).• Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment.• Conducts off station maintenance when required.• When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: • High School Diploma • Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: + “I” Level &amp; “O” Level Tire &amp; Wheel certification + Hydraulic Contamination certification + Collateral Duty Inspector (CDI) qualification + Corrosion Prevention and Control and Aircraft Paint qualification + “I” Level Battery Maintenance certification Experience: • Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. • Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. • Must be United States (U.S.) citizen , be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Have a strong knowledge base of intermediate level maintenance business practices and procedures • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” level, “I” level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance. • Must have an in-depth knowledge of applicable technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program. • Must be willing and able to work with hazardous materials and conduct specialty on-the-job training. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Installs and maintains low-voltage (480/277, 600 volts) and below (50/60 HZ) single and multi-phase power wiring. Installs feeder and branch circuits including conduit, service wire, fuse and breaker panels, switches, outlets, junction and outlet boxes, lighting fixtures, splices, connectors, and ground wiring for red and black installations. Ensures that the material used, and workmanship meets the requirements of the applicable technical and safety standards. Provide detailed reports on equipment s failures maintenance requirements and lifecycle replacements. Respond to service calls and preventive maintenance inspections orally or in writing through computerized maintenance management system (CMMS) regarding malfunctioning/inoperable equipment. Use US Army quality assurance procedures to ensure that the material used, and workmanship meet the requirements of the applicable DoD and military specifications, criteria, procedures, and technical/safety standards. Provide electrical design input to engineering installation plans and Engineering Change Proposals (ECP). Provide 24-hour 7-day quick reaction technical support to mission critical equipment s. Performs power quality measurements on the commercial and technical power of the facility and plans actions for correction of any deficiencies. Supports US Army systems on site whenever and wherever deployed. Available to deploy to other countries and/or theaters to perform quick reaction technical support to US forces worldwide military contingency missions and requirements in potentially hazardous work environments. Able to maneuver in small spaces and lift up to 50lbs.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree and 3 plus years of experience or College, Vocational School, or High School diploma or equivalent and a combination of 10 years education and experience leading to licensure as a Master Electrician, or equivalent licensure or certification at a state level; or 12 years experience in an equivalent Military Electrician training/certification. US Citizen with an active TS/SCI is required. Must have knowledge of and experience in developing solutions to unique security requirements inherent with US Top Secret Sensitive Compartmented Information Facilities (SCIF) and their classified operations, including classified data processing protection.</p><p>Experience in the management of an operational military unit/activity or civilian equivalent is required. Experience leading planning charrettes, working with DoD clients, and presenting to and engaging with military leadership.</p>

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As a Housekeeping Supervisor, you’re not just ensuring the upkeep and cleanliness of the hotel – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br>Here's what you'll do during a typical day:<br><br>Supervise the housekeeping team: Train, schedule, and oversee team members to ensure cleanliness and quality standards in guest rooms Conduct room and area inspections: Perform routine checks of checkout rooms, spot inspections of occupied rooms, and review service areas, storage, and corridors to ensure cleanliness and maintenance standards are met Coordinate maintenance needs: Report and promptly follow up on any maintenance issues or facility concerns Oversee special projects: Schedule and supervise periodic deep cleaning and special housekeeping initiatives Manage inventory and equipment: Maintain stock levels and ensure proper maintenance of housekeeping equipment Delight our guests: Ensure excellent service, including VIP and special guest requests<br><br>Qualifications<br><br>What It Takes to Make the Stay<br><br>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

Greet and welcome guests with warmth, professionalism, and genuine hospitality. Ensure VIP and special guests receive a seamless, personalized experience from arrival to departure. Coordinate pre-arrival arrangements including room preferences, special requests, and amenities in collaboration with relevant departments. Maintain updated guest profiles and preferences in the property management system for future reference and loyalty building. Assist with check-ins and check-outs, ensuring all processes are handled efficiently and courteously. Handle guest inquiries, concerns, and requests promptly, diplomatically, and effectively. Liaise with departments such as Housekeeping, Concierge, Room Service, and Security to ensure guest satisfaction. Conduct guest room inspections for VIP arrivals to ensure readiness and attention to detail. Anticipate guest needs and proactively provide thoughtful touches that enhance the guest experience. Support the Front Office team in administrative tasks, reporting, and daily operations as needed. Uphold and represent the hotel's service standards and brand values at all times.<br><br>Don't quite meet every single requirement, but still believe you'd be a great fit for the job? We'll never know unless you hit the 'Apply' button. Start your journey with us today.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Food Safety &amp; Quality Control Officer</p><p>A specialized company in the <b>confectionery and chocolate manufacturing</b> industry is looking for a <b>Food Safety &amp; Quality Control Officer</b> with the following requirements:</p><p><br></p><p>Job Description &amp; Responsibilities</p><ul><li>Monitor product quality throughout all stages of production through to the finished product, ensuring consistent quality and compliance with approved specifications.</li><li>Inspect and monitor raw materials, manufacturing methods, storage, shelf life, and packaging.</li><li>Implement and monitor <b>HACCP, ISO 22000, and GMP</b> systems.</li><li>Identify product problems and defects, determine their causes, and take appropriate corrective actions.</li><li>Monitor product quality and food safety throughout the production stages.</li><li>Monitor hygiene, sanitation, <b>Allergens</b>, and <b>Traceability</b>.</li><li>Maintain and update records, procedures, and documentation.</li><li>Prepare the facility for inspections and audits.</li><li>Train and monitor employees on food safety and quality requirements.</li><li>Monitor chocolate and <b>Chocolate Tempering</b>, including knowledge of temperatures, handling methods, and storage.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Practical experience in <b>Food Safety and Quality Control</b> within confectionery or chocolate factories or companies.</li><li>Experience in implementing and monitoring <b>HACCP, ISO 22000, and GMP</b> systems.</li><li>Practical experience with chocolate and <b>Chocolate Tempering</b>.</li><li>Knowledge of temperatures, chocolate handling methods, and storage.</li><li>Ability to identify product problems and defects, determine their causes, and take appropriate corrective actions.</li><li>Knowledge and monitoring of hygiene and sanitation requirements.</li><li>Knowledge and monitoring of <b>Allergens</b>.</li><li>Knowledge and monitoring of <b>Traceability</b>.</li><li>Ability to maintain and update records, procedures, and documentation.</li><li>Ability to train and monitor employees on food safety and quality requirements.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary</p><p>We are seeking an experienced <b>Deputy Operations Manager</b> to support the Operations Manager in overseeing the daily operations of our Food &amp; Beverage division. The successful candidate will help ensure operational efficiency, maintain service excellence, and drive compliance with company standards across all outlets.</p><p>Key Responsibilities</p><ul><li>Support the Operations Manager in managing the day-to-day operations of multiple F&amp;B outlets.</li><li>Monitor outlet performance, service quality, and customer satisfaction.</li><li>Ensure compliance with Standard Operating Procedures (SOPs), company policies, and food safety standards.</li><li>Assist in supervising, coaching, and training outlet managers and operational staff.</li><li>Prepare operational reports, monitor key performance indicators (KPIs), and recommend improvements.</li><li>Support cost control initiatives and help improve operational efficiency and profitability.</li><li>Conduct regular outlet inspections to ensure cleanliness, hygiene, and operational discipline.</li><li>Coordinate with other departments to ensure smooth business operations.</li><li>Assist in resolving operational issues and customer concerns promptly.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Qualifications &amp; Requirements</p><ul><li>Bachelor's degree or Diploma in Hospitality Management, Business Administration, or a related field.</li><li>Minimum <b>4–6 years</b> of experience in the Food &amp; Beverage or hospitality industry, with at least <b>2 years</b> in a supervisory or assistant management role.</li><li>Strong leadership, communication, and team management skills.</li><li>Good understanding of restaurant operations, SOP implementation, and food safety regulations.</li><li>Ability to analyze operational performance and implement process improvements.</li><li>Proficiency in Microsoft Office and restaurant/POS management systems.</li></ul><p><br></p></div>

Technician <br><br> Job Id :100195367<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Position Purpose<br><br>The Restaurant Maintenance Technician is responsible for ensuring the uninterrupted, safe, and efficient operation of all restaurant equipment, kitchen machinery, and physical infrastructure. This role requires a hands-on, proactive troubleshooter who can perform preventive maintenance, execute rapid emergency repairs, and maintain a safe, code-compliant dining and kitchen environment.<br><br>Key Duties and Responsibilities<br><br> Equipment & Machinery Maintenance<br><br>Conduct routine inspections, preventative maintenance, and servicing on all heavy commercial kitchen equipment (e.g., commercial ovens, fryers, griddles, walk-in coolers, freezers, dishwashers, and ice makers).<br><br>Diagnose, troubleshoot, and repair mechanical, electrical, and plumbing issues rapidly to minimize restaurant downtime during peak service hours.<br><br>Maintain a comprehensive spare parts inventory and coordinate with vendors or manufacturers for specialized warranty repairs when necessary.<br><br>Basic Details<br><br>salary : 250-300 KD<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 50555951<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

HVAC Project & Maintenance Supervisor – Kuwait<br><br>Supervisor <br><br> Job Id :100194594<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>We are Urgently looking for an HVAC Project & Maintenance Supervisor with following requirements:<br><br>Job Responsibilities<br><br>Responsible for supervising HVAC installation, maintenance, troubleshooting, and project execution. Coordinate with technicians, subcontractors, materials, and site activities while ensuring work is completed safely, efficiently, and according to project specifications. Handle preventive and corrective maintenance, client coordination, inspections, testing, commissioning, and service reports.<br><br>Requirements<br><br> Diploma in Mechanical Engineering Relevant HVAC experience in project and maintenance works. Valid Kuwait Driving License – Mandatory Transferable Visa No. 18 – Mandatory Good technical and team coordination skills. Candidates currently residing in Kuwait only preferred.<br><br>Please send your updated CV to info@liberty-kwt.com.<br><br>Book AC Servicing<br><br>Basic Details<br><br>Location : Murqab , Kuwait<br><br>Qualification<br><br>Posted : 13 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : info@liberty-kwt.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br><br>Job Responsibilities <br></span><p>•&nbsp;&nbsp; &nbsp;Review EH&amp;S policy &amp; arrangements, identify areas for improvement as required.<br> •&nbsp;&nbsp; &nbsp;Conduct and write risk assessments for specific tasks or processes, ensure that suitable controls are implemented, communicated to BU’s and those workers concerned .&nbsp;<br> •&nbsp;&nbsp; &nbsp;Monitor contractor compliance In line with Alghanim Facilities contractor code of conduct.<br> •&nbsp;&nbsp; &nbsp;Review and approve contractor RAMS before any work commence.&nbsp;<br> •&nbsp;&nbsp; &nbsp;Record and Investigate accidents, incidents &amp; Near misses and ensure that root cause identification, &nbsp;and that suitable controls are put in place to prevent a recurrence.&nbsp;<br> •&nbsp;&nbsp; &nbsp;Maintain records of all Accident, injury and near miss statistics, raise safety alerts.<br> •&nbsp;&nbsp; &nbsp;Attend Monthly site EH&amp;S meetings with Bu’s key stakeholders, ensure that records and an action log of these Monthly EH&amp;S &nbsp;meetings maintained.<br> •&nbsp;&nbsp; &nbsp;Attend other Safety related meetings or inspections with Ministry or regulatory bodies.<br> •&nbsp;&nbsp; &nbsp;Provide E.H&amp;S support and advice to the business units on request.<br> •&nbsp;&nbsp; &nbsp;Plan to ensure that the Monthly site EH&amp;S audit schedule is met.<br> •&nbsp;&nbsp; &nbsp;Carry our safety audits work with facilities supervisors and local management team to ensure that corrective actions are completed.&nbsp;<br> •&nbsp;&nbsp; &nbsp;Plan and execute annual fire drills&nbsp;<br> •&nbsp;&nbsp; &nbsp;Plan schedule &amp; Deliver Fire awareness and first aid training to staff.<br> •&nbsp;&nbsp; &nbsp;Identify site specific EH&amp;S training needs for staff and ensure that you provide site specific &amp; relevant staff training and Toolbox Talks for the sites you audit and support.&nbsp;<br> •&nbsp;&nbsp; &nbsp;Carry out inspections of contractor’s , work site &nbsp;and working practices , and address &amp; report any safety violations, or unsafe behaviours. &nbsp;<br> &nbsp;</p><br> <br><br>Candidate Requirements <br><p>•&nbsp;&nbsp; &nbsp;Graduate / Diploma in Safety or Engineering Discipline.<br> •&nbsp;&nbsp; &nbsp;3 + Years’ experience working in a H&amp;S safety officer or Safety supervisory role would be an advantage.<br> •&nbsp;&nbsp; &nbsp;NEBOSH general certificate&nbsp;<br> •&nbsp;&nbsp; &nbsp;Certified ISO 45001 Lead auditor,&nbsp;<br> •&nbsp;&nbsp; &nbsp;Certified trainer , desirable<br> •&nbsp;&nbsp; &nbsp;Knowledge of MS Office solutions (Excel, Word, Power point)<br> •&nbsp;&nbsp; &nbsp;English – Verbal &amp; Written (Arabic an advantage<br> •&nbsp;&nbsp; &nbsp;Knowledge of KFF , MOSA &amp; PAM regulations&nbsp;<br> •&nbsp;&nbsp; &nbsp;A flexible team worker who role models good E.H&amp;S practices&nbsp;<br> •&nbsp;&nbsp; &nbsp;Valid Driving License&nbsp;<br> &nbsp;</p><br> <br><br>Education <br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a knowledgeable and proactive Piping Supervisor to join our dynamic team in the Project &amp; Construction Planning industry. This role is essential for ensuring that our piping systems are designed, installed, and maintained according to the highest standards of safety and efficiency. As a Piping Supervisor, you will play a pivotal role in overseeing piping projects, ensuring compliance with industry codes and standards, and fostering a culture of safety and excellence within your team.</p><p>In this position, you will have the opportunity to work closely with skilled professionals and gain hands-on experience in various piping projects. We value continuous learning and professional development, and you will have access to training programs designed to enhance your technical skills and leadership capabilities. Our team culture emphasizes collaboration and innovation, providing you with a supportive environment where your ideas and contributions are valued.</p><p>As you grow in this role, you will have the chance to take on more responsibilities and advance your career within our organization. We believe in recognizing and rewarding talent, and as you demonstrate your expertise in piping knowledge and safety standards, you will be well-positioned for future leadership opportunities. Join us and be part of a forward-thinking company that prioritizes employee growth and development.</p><p><b>Responsibilities:</b></p><ol><li>Supervise the installation and maintenance of piping systems, ensuring compliance with relevant codes and safety standards to guarantee operational efficiency and safety on-site.</li><li>Conduct regular inspections of piping installations, utilizing your expertise to identify potential issues and implement corrective actions to prevent safety hazards.</li><li>Collaborate with project managers and engineers to develop project plans, timelines, and resource allocations that align with project goals and deadlines.</li><li>Provide training and mentorship to junior staff and team members, fostering a culture of continuous improvement and knowledge sharing within the team.</li><li>Maintain accurate documentation of all piping activities, including inspections, maintenance, and compliance reports, to ensure traceability and accountability.</li><li>Coordinate with safety officers to conduct risk assessments and ensure that all safety protocols are followed during piping operations.</li><li>Monitor project budgets and resource utilization, making recommendations for cost-effective solutions that do not compromise safety or quality.</li><li>Engage with clients and stakeholders to communicate project progress, address concerns, and ensure satisfaction with piping services delivered.</li><li>Stay updated on industry trends, codes, and best practices in piping and safety to continuously enhance your knowledge and the team's performance.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong knowledge of piping codes and standards, ensuring compliance in all projects.</li><li>Expertise in safety protocols and risk management within the construction environment.</li><li>Excellent leadership and team management skills to guide diverse teams effectively.</li><li>Proficient in project management tools for planning and monitoring project progress.</li><li>Ability to conduct thorough inspections and assessments of piping systems.</li><li>Strong communication skills to liaise with clients, engineers, and team members.</li><li>Problem-solving skills to identify issues and implement effective solutions quickly.</li></ul></div>