وظائف مهندسين خرسانه

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><u>Cohesity</u><span> is the leader in AI-powered data security. Over 13,600 enterprise customers, including over 85 of the Fortune 100 and nearly 70% of the Global 500, rely on Cohesity to strengthen their resilience while providing Gen AI insights into their vast amounts of data. Formed from the combination of Cohesity with Veritas’ enterprise data protection business, the company’s solutions secure and protect data on-premises, in the cloud, and at the edge. Backed by NVIDIA, IBM, HPE, Cisco, AWS, Google Cloud, and others, Cohesity is headquartered in Santa Clara, CA, with offices around the globe.&nbsp;&nbsp;<br>We’ve been named a Leader by multiple analyst firms and have been globally recognized for Innovation, Product Strength, and Simplicity in Design , and </span><span><span><span>our culture</span></span></span><span>.&nbsp;</span><br><span><b>Want to join the leader in AI-powered data security?</b></span></p><br><br><br><br><br><p>Are you driven, high-achieving, and energized by collaborative environments? Cohesity is seeking an Enterprise Account Executive to help accelerate growth in the fast-paced world of modern data management and cyber resilience.</p><br><br><br><p>We’re looking for an Enterprise Account Executive to help develop and grow a defined territory. This is an active, hands‑on sales role where you’ll focus on prospecting, building pipeline, and closing opportunities, while also supporting the expansion of existing accounts. You’ll work in a fast‑moving space within enterprise technology— data security and AI‑powered resilience—gaining exposure to complex customer needs and high‑impact solutions.</p><br><br><br><p><b>How you’ll spend your time here: </b></p><br><br><br><ul><li>Execute a territory plan focused on net‑new logo acquisition and account growth across a defined set of enterprise accounts</li><li>Build, manage, and progress a qualified sales pipeline, including opportunities you source directly and those supported through channel partners</li><li>Work within complex customer organisations by identifying key stakeholders, building relationships, and engaging with senior decision‑makers as your experience grows</li><li>Support and lead customer engagements through discovery, evaluation, proposal development, and solution alignment, with guidance from Sales Engineers and leadership</li><li>Develop and deliver clear, value‑based proposals that connect Cohesity’s platform to customer security, resilience, and operational needs</li><li>Collaborate closely with channel partners and technology alliances (including NVIDIA, IBM, HPE, and AWS) to support deal execution and expand market reach</li><li>Maintain accurate opportunity tracking and forecasting, and contribute to consistent quarterly performance</li><li>Share customer insights and competitive feedback with the wider sales and product teams to support continuous improvement</li></ul><br><p><b>We’d love to talk to you if you have many of the following: </b></p><br><br><br><ul><li>Demonstrated experience selling into and partnering with Information Security / Cybersecurity teams, with a strong understanding of enterprise security frameworks, compliance standards, and the ability to align solutions to customer security and risk requirements.</li><li>A customer‑focused mindset and strong interest in cybersecurity and data protection, especially ransomware and recovery</li><li>Proven experience selling enterprise technology solutions, ideally within infrastructure, SaaS, or adjacent markets</li><li>Evidence of success contributing to net‑new customer acquisition and growing existing accounts</li><li>Foundational understanding of data security and backup technologies, with a willingness to deepen technical knowledge&nbsp;<ul><li>Familiarity with Cohesity solutions (DataProtect, DataHawk, SmartFiles) is a plus</li><li>Exposure to platforms such as NetBackup, Backup Exec, or InfoScale is helpful but not required</li></ul></li></ul><ul><li>Comfort working with channel partners, with an interest in developing co‑selling skills</li><li>Strong communication skills, with the ability to present clearly to customers and internal stakeholders</li><li>Demonstrated experience using AI tools to improve productivity, organisation, and sales effectiveness</li><li>Bachelor’s degree in Business or a related field, or equivalent experience</li><li>Professional English language proficiency for customer and internal communication</li><li>Willingness to travel as required</li></ul><br><br><br><p><i><i>Data Privacy Notice for Job Candidates:<br>For information on personal data processing, please see our </i><u>Privacy Policy</u><i>.</i></i></p><br><br><p><br><i><i>Equal Employment Opportunity Employer (EEOE)<br>Cohesity is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, sexual orientation, national origin or nationality, ancestry, age, disability, gender identity or expression, marital status, veteran status or any other category protected by law.<br>If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact us at 1-855-9COHESITY or </i><u>talent@cohesity.com</u><i> for assistance.</i></i><br><i><i>In-Office Expectations<br>Cohesity employees who are within a reasonable commute (e.g. within a forty-five (45) minute average travel time) work out of our core offices 2-3 days a week of their choosing.</i></i></p><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview **This position will be physically located in Kuwait in support of LOGCAP** Supervises scheduled and unscheduled maintenance repair of pre-engineered humidity-controlled metal storage buildings that have air and watertight roll up doors. May also be required to supervise maintenance on hydraulic, electrical and pneumatic security barriers. The selected individual will be responsible for, but not limited to ensuring compliance with the Performance Work Statement (PWS) for the following functions: security barrier electrical systems, hydraulic systems, pneumatic systems, mechanical systems and electronic control stations. Provides leadership and mentors junior personnel to develop appropriate skillsets. Addresses customer facility maintenance concerns in a prompt, professional and courteous manner. Uses provided Computer Maintenance Management System (CMMS) to correctly input data related to maintenance work orders, preventative maintenance inspections, and emergency/urgent customer requests. Ensures personnel correctly capture data on maintenance work order requests and preventative maintenance inspection forms for upload into Maximo. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Analyzes deficiencies in equipment and supervises necessary repairs + Inspects equipment and as necessary, conducts repairs or replaces faulty components using a variety of hand tools and equipment + Completes mechanical repairs or improvements on a variety of processes, equipment, fixtures, and unit operations + Provides technical/operational guidance to ensure compliance with the PWS while delivering desired results + Participates in the preventive and corrective maintenance programs + Evaluates maintenance requests, sets priorities, and processes work assignments + Inspects and tests facility components for proper operation IAW manufacturer’s specifications + Inspects hydraulic systems for wear, leaks and proper fluid level IAW manufacturer’s specifications + Working with sheet metal parts; repairs and installs hydraulic, pneumatic parts and systems + Changes bearings, sprockets, chains, belts, shafts, cylinders, and other interchangeable components + Guides technicians in the performance of basic pipefitting, plumbing, threading, and layout + Provides reports on maintenance, safety and quality issues + Performs other duties as assigned Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Must be a U.S. Citizen + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Driver’s License, is required. + Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Industry and trade certifications are required + Specific training in the operation of hydraulic and pneumatic systems + Experience: + 4-7 years of mechanical maintenance experience + 4-5 years of experience planning, laying out, and installing electrical distribution systems + Working knowledge of electrical systems including secondary distribution and interior systems + Hands-on experience with electrical circuits, power cables, controls, and motors + Ability to read blueprints, single-line diagrams, and rough shop drawings + Must possess strong knowledge in a skilled trade (electrical, pneumatic, plumbing, etc.) + Knowledge of U.S. Army Safety Guidelines and OSHA Standards preferred + Skills: + Requires ability to analyze the operation of various infrastructure systems, determine the cause of malfunctions, and take corrective actions as required + Strong leadership and analytical skills + Effective communication, organizational, interpersonal and people management skills + Mastery of engineering skills + SUPERVISORY/BUDGET RESPONSIBILITIES: + Will have direct oversight of junior technicians and subcontracted personnel when they are on site + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a dedicated and experienced Foreman in the Civil sector to join our dynamic team in Kuwait. This role is pivotal in overseeing construction projects, ensuring they are completed on time, within budget, and to the highest standards of quality. As a Foreman, you will play a crucial role in coordinating the efforts of various teams, managing resources, and maintaining a safe work environment. Your expertise will guide the team, fostering a culture of collaboration and excellence.</p><p>In this position, you will have the opportunity to grow your career within a supportive environment that values continuous learning and professional development. Our company is committed to investing in our employees, offering training programs and mentorship opportunities to enhance your skills and knowledge in the field. You will be part of a team that prioritizes safety, innovation, and efficiency, enabling you to make a significant impact on our projects and the community.</p><p>As you take on this leadership role, you will be responsible for implementing best practices and ensuring compliance with industry standards. Your ability to communicate effectively with team members and stakeholders will be essential in driving project success. Join us and be a part of a forward-thinking organization that recognizes and rewards hard work, paving the way for your advancement in the civil construction industry.</p><p><b>Responsibilities:</b></p><ol><li>Oversee daily operations on construction sites, ensuring adherence to project plans and specifications while maintaining safety protocols and quality standards.</li><li>Coordinate with subcontractors and suppliers to ensure timely delivery of materials and services, optimizing workflow and minimizing delays.</li><li>Conduct regular inspections of work processes and site conditions, identifying potential issues and implementing corrective actions to maintain project timelines.</li><li>Manage and mentor a team of construction workers, providing guidance and support to enhance their skills and productivity.</li><li>Prepare and maintain detailed project documentation, including progress reports, schedules, and budgets, to ensure transparency and accountability.</li><li>Collaborate with project managers and engineers to develop strategies for efficient resource allocation and risk management throughout the project lifecycle.</li><li>Facilitate effective communication between all parties involved in the project, ensuring everyone is informed of updates and changes to plans.</li><li>Implement and enforce health and safety regulations on-site, conducting safety meetings and training sessions to promote a culture of safety.</li><li>Analyze project performance and provide recommendations for improvements, leveraging lessons learned to enhance future project execution.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong leadership skills to effectively manage and motivate a diverse team of construction professionals.</li><li>Excellent communication skills, both verbal and written, to facilitate collaboration and convey critical information.</li><li>Proficient in project management software and tools to track progress and manage resources efficiently.</li><li>In-depth knowledge of civil construction processes and safety regulations to ensure compliance and quality.</li><li>Problem-solving abilities to address challenges and implement effective solutions on-site.</li><li>Time management skills to prioritize tasks and meet deadlines without compromising quality.</li><li>Ability to read and interpret blueprints and technical drawings, translating them into actionable plans for the team.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Title:</b></p><p>Laboratory Manager&nbsp;</p><p>Division:&nbsp;&nbsp;</p><p>Material Testing</p><p>I‐Function:&nbsp;</p><p>‐ Overall technical and commercial responsibility for the Laboratory operation.&nbsp;</p><p>‐ Oversee the operation of the Laboratory and develop its business.&nbsp;</p><p>‐ Maintain&nbsp; and&nbsp; further&nbsp; the&nbsp; company&nbsp; image&nbsp; in&nbsp; the&nbsp; country&nbsp; of&nbsp; operation&nbsp; in&nbsp; line&nbsp; with&nbsp; the&nbsp; Quality&nbsp; policy&nbsp; and&nbsp;</p><p>achieve the company strategic technical and commercial objectives in this country.&nbsp;</p><p>‐ Ensure&nbsp; efficient,&nbsp; effective&nbsp; and&nbsp; profitable&nbsp; commercial&nbsp; operations&nbsp; of&nbsp; all&nbsp; the&nbsp; departments&nbsp; in&nbsp; the&nbsp; Laboratory&nbsp;</p><p>within a framework of team work, safety, quality and maintenance of integrity and good spirit.&nbsp;</p><p>II‐ Reporting:&nbsp;</p><p>‐ To the General Manager (or Deputy General Manager).&nbsp;</p><p>III‐ Supervising:&nbsp;&nbsp;</p><p>‐ Heads of Divisions and Departments in the Laboratory.&nbsp;</p><p>‐ Branch Supervisors.&nbsp;&nbsp;</p><p>‐ Senior Procurement and Personnel Officer.&nbsp;&nbsp;</p><p>‐ Data Encoders.&nbsp;&nbsp;</p><p>‐ All related personnel.&nbsp;</p><p>IV‐ Duties and Responsibilities:&nbsp;</p><p>‐ Overall Marketing, Commercial and Technical responsibility of the Laboratory.&nbsp;</p><p>‐ Oversees tidy office and laboratories environment.&nbsp;</p><p>‐ Oversees the maintenance of all Laboratory equipment, training apparatus, documents, books, manuals and&nbsp;</p><p>inventory allocations.&nbsp;&nbsp;</p><p>‐ Establishes or adjusts work procedures to meet schedules and deadlines.&nbsp;</p><p>‐ Oversees and controls time and testing records.&nbsp;</p><p>‐ Sets in coordination with the GM the yearly objectives&nbsp; for the Laboratory and ensures the achievement of&nbsp;</p><p>these objectives.&nbsp;</p><p>‐ Prepares yearly budgets and ensures the achievement of the budgets as approved by the GM or DGM.&nbsp;</p><p>‐ Performs close cost control on the Laboratory operation at all levels.&nbsp;</p><p>‐ Assists in recruitment and approves the enrollment of new recruits.&nbsp;</p><p>‐ Evaluates and assists in the procurement of equipment and other purchases as needed in the laboratory.&nbsp;</p><p>‐ Analyzes&nbsp; and&nbsp; resolves,&nbsp; or&nbsp; assists&nbsp; workers&nbsp; in&nbsp; solving&nbsp; work&nbsp; problems&nbsp; and&nbsp; provides&nbsp; moral&nbsp; assistance&nbsp; and&nbsp;</p><p>support for their personal problems.&nbsp;</p><p>‐ Signs laboratory technical reports.&nbsp;</p><p>‐ Writes and reviews technical reports issued by the laboratory.&nbsp;</p><p>‐ Prepares tenders, quotations and estimates for laboratory works and reviews and approves quotations&nbsp;</p><p>issued by other departments in the Laboratory.&nbsp;</p><p>‐ Maintains and keeps updated technical references, relevant codes and standards.&nbsp;</p><p>‐ Maintains technical standards, keeps aware of technical development and where appropriate, maintains&nbsp;</p><p>contact with various local technical committees and bodies.&nbsp;</p><p>‐ Handles customer complaints as reported by the Quality Division and sets‐up curative, corrective and&nbsp;</p><p>preventive actions.&nbsp;</p><p>‐ Represents the Laboratory at technical and commercial meetings including liaison with clients or technical&nbsp;</p><p>groups.&nbsp;</p><p>‐ Oversees the direction of samples when required to the approved subcontractors.&nbsp;</p><p><br></p><p>&nbsp; &nbsp;</p><p>Laboratory Manager&nbsp;</p><p>This document is the exclusive property of ACTS. Any partial or total reproduction of any kind is forbidden without the prior approval of the Management.</p><p>‐ Coordinates and schedules with the Training and Consultancy Division the internal training requirements of&nbsp;</p><p>staff and recommends to Management external training of staff.&nbsp;</p><p>‐ Ensures the proper set‐up of the laboratory to host theoretical and performance training sessions for ACI&nbsp;</p><p>Certification or similar training events and assists the trainers when required.&nbsp;</p><p>‐ Conducts research to develop custom tests and investigates complaints on existing tests or services.&nbsp;</p><p>‐ Prepares weekly summary report of the overall operation of the central and site laboratories and hands it&nbsp;</p><p>over to the GM or DGM (to enclose the weekly summary reports of the heads of Department).&nbsp;</p><p>‐ Ensures that daily, weekly and monthly checklists are timely filled by heads of Departments and that all&nbsp;</p><p>items mentioned in these checklists are fulfilled.&nbsp;</p><p>‐ Recommends measures to improve testing procedures and use of equipment.&nbsp;</p><p>‐ Confers with Management, scientists or engineers to conduct analyses, interpret test results, or develop&nbsp;</p><p>nonstandard tests.&nbsp;</p><p><br></p><p>VI‐ <b>Qualification</b>:&nbsp;</p><p>Education and Experience:&nbsp;</p><p>Master’s Degree in Engineering or Chemistry, or a Bachelor’s Degree (B.S.) in Engineering or a related field with a&nbsp;</p><p>considerable&nbsp; experience&nbsp; in&nbsp; managing&nbsp; laboratories&nbsp; (minimum&nbsp; 7&nbsp; years);&nbsp; or&nbsp; &nbsp; Any&nbsp; equivalent&nbsp; combination&nbsp; of&nbsp;</p><p>experience and training which provides the knowledge, skills and abilities necessary to perform the work.&nbsp;&nbsp;</p><p>Language Ability : (Arabic, English)&nbsp;</p><p>Arabic: Read, Spoken and Written&nbsp;</p><p>English: Read, Spoken and Written&nbsp;</p><p>Skills:&nbsp;</p><p>‐ Ability to establish and maintain effective working relationships by developing a high level of credibility and&nbsp;</p><p>trust with applicants, employees, officials, and the general public.&nbsp;</p><p>‐ Demonstrated ability to interact as a leader in a team‐building environment with a wide variety of&nbsp;</p><p>individuals from diverse disciplines, cultures and experience.&nbsp;</p><p>‐ High levels of resourcefulness, influence, execution skills (strategy through implementation).&nbsp;</p><p>‐ Ability to build and lead an effective team and foster a sense of collaboration to achieve goals.&nbsp;</p><p>‐ Excellent time management skills which includes the ability to balance multiple projects concurrently (with&nbsp;</p><p>different deadlines) and marshal the resources necessary to accomplish them.&nbsp;</p><p>‐ Conversant with ISO 9001, ISO 17025 and HSE systems.&nbsp;</p><p>‐ Experience in financial control of service laboratory.&nbsp;</p><p>Computer Skills:&nbsp;</p><p>Internet software, E‐mail, MS office, Inventory and database software.&nbsp;</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Electrical Maintenance Manager - Residential for our client in Kuwait. Position Overview: The Electrical Maintenance Manager is responsible for planning, directing, and managing all electrical maintenance activities for a fleet of onshore drilling rigs and associated equipment. Key Responsibilities: Maintenance Management: Develop, implement, and continuously improve preventive, predictive, and corrective electrical maintenance programs for land drilling rigs. Ensure maximum reliability and availability of drilling electrical systems and associated equipment. Plan and supervise major electrical overhauls, rig upgrades, and refurbishment projects. Review equipment performance and implement reliability improvement initiatives. Monitor equipment failures and perform root cause failure analysis (RCFA) to eliminate recurring issues. Ensure maintenance activities comply with OEM recommendations and industry best practices. Fleet Support: Provide technical support to multiple onshore drilling rigs. Coordinate troubleshooting of complex electrical failures affecting drilling operations. Monitor rig electrical KPIs including equipment availability, MTBF, MTTR, and maintenance compliance. Conduct periodic inspections and audits of rig electrical systems. Standardize maintenance procedures across the drilling fleet. Equipments: Responsible for electrical maintenance of: SCR and AC/VFD drilling rigs, Rig power generation systems, Diesel generators, Motor Control Centers (MCC), Variable Frequency Drives (VFD), Silicon Controlled Rectifier (SCR) systems, Top Drive electrical systems, Drawworks electrical systems, Mud pump electrical systems, Rotary equipment, Air compressors, Lighting systems, Rig camp electrical distribution systems, High and low voltage distribution systems, UPS systems, PLC and control systems, Instrumentation interfaces, Emergency shutdown systems, Rig communication systems, Electrical protection systems. Planning &amp; Asset Management: Develop annual electrical maintenance plans and budgets. Manage spare parts inventory and critical electrical components. Coordinate procurement of electrical materials and services. Optimize maintenance costs while maintaining equipment reliability. Maintain accurate maintenance records using a Computerized Maintenance Management System (CMMS). Leadership: Lead, mentor, and supervise Electrical Superintendents, Electrical Supervisors, Electrical Engineers, and field electricians. Allocate manpower effectively across multiple drilling rigs. Conduct performance evaluations and competency assessments. Identify training needs and develop technical competency programs. HSE &amp; Compliance: Ensure compliance with company HSE policies and client requirements. Promote a strong electrical safety culture. Ensure compliance with: Lock Out/Tag Out (LOTO) Electrical isolation procedures Permit to Work (PTW) Hazard identification and risk assessment Safe electrical work practices Participate in incident investigations and implement corrective actions. Ensure compliance with applicable electrical codes and standards. Quality &amp; Continuous Improvement: Develop and update electrical maintenance procedures. Conduct reliability analysis and continuous improvement initiatives. Evaluate new technologies to improve drilling equipment reliability. Support rig commissioning, acceptance testing, and startup activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications:</b></p><p>Bachelor's Degree in Electrical Engineering or equivalent. Professional certifications in electrical engineering or maintenance management are advantageous. Experience of 8+ years of electrical maintenance experience in the oil and gas drilling industry with minimum 5 years in a managerial or superintendent-level position. Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred. Experience managing electrical maintenance across multiple drilling rigs. Strong knowledge of AC and SCR drilling rig electrical systems. Experience working in GCC/Middle East drilling operations is highly desirable.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Solution Engineering Manager Siemens Grid Software Location: Kuwait City, Kuwait About the role: This is a senior leadership role at the intersection of engineering excellence and regional energy transformation. As Solution Engineering Manager, you will be the driving force behind the technical delivery of Siemens Grid Software portfolio overseeing multidisciplinary teams and managing a portfolio of high-impact infrastructure projects that directly support national agendas, including Kuwait Vision and broader grid modernization programs. Key Responsibilities Lead end-to-end technical execution of Grid Software projects in Kuwait, ensuring delivery on time, within scope, budget, and quality standards Define project objectives, technical scope, resource allocation, and delivery strategies in collaboration with key stakeholders Drive engineering best practices through the reuse of standard components, templates, and proven delivery frameworks Ensure full compliance with Siemens architectural standards, technical governance, cybersecurity requirements, and EHS policies Represent Siemens in senior-level engagements with government entities, utilities, EPC contractors, and strategic partners Support pre-sales activities, strategic customer engagements, and long-term account retention initiatives Contribute to regional go-to-market strategy and business development planning in alignment with sales and regional management Build and maintain trusted relationships with customers, partners, vendors, and internal stakeholders at all levels Lead and coordinate internal engineering resources, project managers, lifecycle teams, and third-party vendors across geographically distributed teams Coach and develop Technical Project Leads, Engineers, and delivery teams fostering a high-performance, collaborative culture Monitor project performance through robust reporting, scheduling, and quality management mechanism Identify, manage, and resolve technical risks, bottlenecks, and escalation topics throughout the project lifecycle Oversee budget accountability and P&amp;L contribution for the territory's engineering portfolio Lead operational improvement initiatives and support business transformation programs within the territory Manage scope, schedule, and cost changes using structured governance and changing control processes Collaborate with global component teams to ensure alignment with Siemens' architectural and delivery standards</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Your Profile Bachelor s degree in electrical engineering, Electronic Engineering, Telecommunications, Computer Science, IT, or a related technical discipline 10 15 years of progressive experience in project execution and engineering leadership, with a focus on medium to large-scale infrastructure or Grid Software projects Proven track record leading multicultural, multidisciplinary engineering and project management teams in international environments Strong background in the Transmission and Distribution sector, with expertise in SCADA systems, IT/OT integration, digitalization, IoT, and cybersecurity Deep technical knowledge of Substation Automation and Telecommunication Systems, including familiarity with Siemens and competitor solutions Experience managing matrix organizations and navigating complex, multi-stakeholder project environments Experience working within Kuwait or broader markets is strongly preferred Established network and familiarity with Kuwait utilities, transmission operators, or government entities is a distinct advantage Understanding of regional regulatory, procurement, and project delivery frameworks in Kuwait and in the Gulf Exceptional communication, stakeholder management, negotiation, and executive presentation skills Demonstrated passion for developing people, coaching technical teams, and building high-performance cultures Strong commercial acumen with solid understanding of project controlling, scheduling, and corrective action frameworks Fluent in English (written and spoken) while Arabic language is highly advantageous</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Projects Manager is responsible for the end-to-end development, planning, execution, and</p><p>delivery of oil and gas services projects at customer sites. This role holds full ownership of the</p><p>project lifecycle from marketing, initial scoping and mobilization through execution, close-out,</p><p>and customer handover ensuring projects are delivered safely, on time, within budget, and to</p><p>the required quality and technical standards.</p><p>Key Responsibilities</p><p>1. Business Development</p><p> Get acquainted with the applications and projects of interest</p><p> Identify potential customers for the relevant projects</p><p> Establish a network of relationships to, prepare necessary presentations, and</p><p>coordinate with other colleagues to ensure alignment</p><p><br></p><p>2. Project Planning</p><p> detailed project execution plans, schedules, and resource plans for services</p><p>projects at customer/client sites.</p><p> Review contract scope, technical specifications, and customer requirements to</p><p>define project deliverables.</p><p> Identify equipment, personnel, materials, and logistics requirements ahead of</p><p>mobilization.</p><p> Prepare risk assessments, HSE plans, and job safety analyses (JSAs) in</p><p>coordination with QHSE teams.</p><p> Develop project budgets and cost estimates; align with commercial/contracts</p><p>teams on scope and pricing.</p><p>3. Project Execution &amp;amp; Site Management</p><p> Take full ownership of project execution at client sites, acting as the primary</p><p>point of accountability.</p><p> Mobilize crews, equipment, and subcontractors in line with the project schedule.</p><p> Supervise and coordinate field teams, service engineers, technicians, and third-</p><p>party contractors on-site.</p><p> Ensure all work is carried out in compliance with HSE regulations, client site</p><p>requirements, and company QHSE policies.</p><p> Monitor daily progress against plan; proactively resolve technical, logistical, or</p><p>personnel issues that arise on-site.</p><p> Act as the primary interface between the company and the client&amp;#39;s site</p><p>representatives during execution.</p><p>4. Process Ownership &amp;amp; Governance</p><p> Own the project management process end-to-end, ensuring adherence to</p><p>internal SOPs, quality management systems, and client contractual</p><p>requirements.</p><p> Maintain full documentation trail: work orders, daily progress reports,</p><p>timesheets, material consumption, non-conformance reports, and close-out</p><p>reports.</p><p><br></p><p> Ensure proper handover procedures, punch-list closure, and customer sign-off</p><p>at project completion.</p><p> Drive continuous improvement of project delivery processes based on lessons</p><p>learned.</p><p><br></p><p>5. Cost, Schedule &amp;amp; Performance Control</p><p> Monitor project costs against budget; report variances and implement</p><p>corrective actions.</p><p> Track project KPIs: schedule adherence, cost performance, HSE incidents,</p><p>quality metrics, and customer satisfaction.</p><p> Prepare and present regular project status reports to management and clients.</p><p> Manage change orders, scope variations, and their commercial/schedule</p><p>impact.</p><p><br></p><p>6. HSE &amp;amp; Compliance</p><p> Ensure all site personnel comply with company and client HSE standards and</p><p>permit-to-work systems.</p><p> Conduct or oversee site HSE inductions, toolbox talks, and safety audits.</p><p> Investigate and report incidents, near-misses, and non-conformances;</p><p>implement corrective/preventive actions.</p><p> Ensure compliance with local regulatory requirements at all project sites.</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Key Qualifications</p><p><br></p><p> Bachelor&amp;#39;s degree in Engineering (Mechanical, Petroleum, Chemical, or related</p><p>field); PMP or equivalent project management certification preferred.</p><p> 8 to 12+ years of experience in the oil and gas industry, with a minimum of 5</p><p>years in a project management role covering field services execution.</p><p> Proven track record managing service delivery projects at client/well/plant sites</p><p>(e.g., completions, workover, wireline, coiled tubing, chemical services,</p><p>maintenance, or similar service lines).</p><p> Strong knowledge of HSE management systems, permit-to-work processes,</p><p>and industry regulatory frameworks.</p><p> Solid understanding of project cost control, scheduling tools (Primavera P6/MS</p><p>Project), and contract management.</p><p> Experience managing multidisciplinary field teams and third-party contractors.</p><p><br></p><p>Key Skills &amp;amp; Competencies</p><p><br></p><p> Strong leadership and on-site decision-making ability</p><p> End-to-end ownership mindset and accountability for outcomes</p><p> Excellent planning, organizational, and multitasking skills</p><p> Strong client relationship management and communication skills</p><p> Ability to work under pressure and manage competing priorities across multiple</p><p>sites</p><p> Sound commercial and cost-management acumen</p><p> Problem-solving and conflict-resolution skills</p><p><br></p><p> Willingness to travel and work at remote/field locations, including rotational</p><p>schedules if required</p><p>KPI’s &amp;amp; Success Metrics</p><p> Meeting budget</p><p> On-time project delivery rate</p><p> Budget/cost variance performance</p><p> HSE incident rate (LTI, TRIR) on managed projects</p><p> Customer satisfaction and repeat business</p><p> Quality of documentation and process compliance</p></div>