وظائف محلل فني في الكويت

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>An Associate's degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E.</li><li>OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li><li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li><li>I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li><li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li><li>Must have an Active Secret US Government Clearance.</li><li>US Citizenship is required to obtain a Secret Clearance.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide technical expertise on fire engines, rescue vehicles, airport rescue and firefighting (ARFF) vehicles, tankers, aerial platforms, and specialized firefighting vehicles.</p><p>Review and evaluate technical specifications, drawings, datasheets, and manufacturer documentation.</p><p>Support procurement activities by preparing technical specifications, evaluating vendor proposals, and participating in technical bid evaluations.</p><p>Ensure fire vehicles comply with applicable safety regulations, operational requirements, and recognized industry standards.</p><p>Recommend fleet upgrades, modifications, and equipment improvements to enhance operational capability.</p><p>Support emergency response operations by providing technical assistance when required.</p><p>Knowledge in:</p><ul><li>Fire vehicle construction and design</li><li>Fire pumps and water delivery systems</li><li>Foam proportioning systems</li><li>Hydraulic rescue equipment</li><li>Diesel engines and powertrains</li><li>Heavy vehicle electrical and electronic systems</li><li>Pneumatic and hydraulic systems</li><li>Vehicle diagnostics and troubleshooting</li><li>Preventive and corrective maintenance</li><li>Fleet management principles</li><li>Technical specifications and procurement</li><li>Inspection, testing, and commissioning of emergency vehicles</li><li>Occupational health and safety requirements</li><li>Emergency vehicle operational standards and best practices</li></ul><p>Skills:</p><ul><li>Strong technical and analytical skills</li><li>Ability to interpret engineering drawings and technical manuals</li><li>Inspection and quality assurance</li><li>Project coordination</li><li>Vendor and supplier coordination</li><li>Communication and presentation skills</li><li>Computer proficiency, including Microsoft Office and computerized maintenance management systems (CMMS)</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in mechanical engineering, Automotive Engineering, Fire Protection Engineering, or a related engineering discipline.</p><p>Relevant professional experience in fire vehicle maintenance, emergency vehicle engineering, fleet management, or heavy vehicle maintenance.</p><p>Experience with municipal, industrial, military, or airport firefighting vehicles is preferred.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication:</b></p><ul><li>Ability to communicate effectively verbally and in writing.</li><li>Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Professional Abilities and Skills:</b></p><ul><li>Familiarity with safety and quality standards.</li><li>Good knowledge of production processes and food safety.</li><li>Optimal interaction with company members and mastering work while preserving company property and its secrets.</li><li>Ability to work under pressure.</li><li>Good knowledge of mechanical systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to conduct technical analyses.</li></ul><p><b>Languages:</b></p><p>• Ability to communicate in Arabic or English, at least at a conversational level.</p><p><b>Personal Skills:</b></p><ul><li>Flexibility in work.</li><li>Responsibility and building trust with others.</li><li>Teamwork skills.</li><li>Knowledge of labor laws.</li><li>Punctuality.</li><li>Accuracy and focus.</li><li>Job competencies.</li><li>Required competency rating.</li></ul><p><br></p><p><b>Tasks and Responsibilities</b></p><ul><li>Inspect machinery and equipment according to maintenance plans established by management.</li><li>Clean machinery, equipment, and work areas and follow all instructions issued by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Conduct routine inspections and preventive maintenance of mechanical machinery and equipment.</li><li>Coordinate with the direct supervisor to ensure the availability of required spare parts.</li><li>Apply all workplace health and safety principles and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in maintenance and repair activities.</li><li>Perform maintenance and repairs on mechanical machinery and equipment according to the instructions of the direct supervisor.</li><li>Assist with the installation and commissioning of new mechanical equipment.</li><li>Prepare technical reports on the condition and performance of mechanical equipment.</li><li>Train and guide junior workers on basic mechanical maintenance activities.</li><li>Participate in developing and improving preventive maintenance plans for mechanical equipment.</li><li>Maintain professional ethics and prioritize the company's interests in all activities.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p><b>Required Skills &amp; Competencies</b></p><ul><li>Good knowledge of mechanical equipment systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to perform basic technical analysis and identify mechanical issues.</li><li>Good understanding of production processes and food safety requirements.</li><li>Knowledge of workplace safety and quality standards.</li><li>Ability to work effectively under pressure.</li><li>Strong attention to detail and accuracy.</li><li>Good teamwork and communication skills.</li><li>Flexible and responsible approach to work.</li><li>Punctual, reliable, and accountable.</li><li>Ability to maintain company property and confidentiality.</li><li>Good interpersonal and professional skills.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Qualifications:</b></p><ul><li>Technical Diploma in Mechanics or equivalent.</li><li>High School Diploma with practical experience.</li></ul><p><b>Experience:</b></p><ul><li>Fresh Graduate.</li><li>3 years experience.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for inspecting, maintaining, troubleshooting, and repairing mechanical equipment and machinery to ensure safe, reliable, and efficient operation. The role supports preventive maintenance activities, equipment installation, technical analysis, spare parts coordination, and compliance with safety and quality standards.</p><p>Key Responsibilities</p><ul><li>Inspect machinery and equipment according to maintenance plans established by management.</li><li>Clean machinery, equipment, and work areas and follow all instructions issued by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Conduct routine inspections and preventive maintenance of mechanical machinery and equipment.</li><li>Coordinate with the direct supervisor to ensure the availability of required spare parts.</li><li>Apply all workplace health and safety principles and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in maintenance and repair activities.</li><li>Perform maintenance and repairs on mechanical machinery and equipment according to the instructions of the direct supervisor.</li><li>Assist with the installation and commissioning of new mechanical equipment.</li><li>Prepare technical reports on the condition and performance of mechanical equipment.</li><li>Train and guide junior workers on basic mechanical maintenance activities.</li><li>Participate in developing and improving preventive maintenance plans for mechanical equipment.</li><li>Maintain professional ethics and prioritize the company's interests in all activities.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Good knowledge of mechanical equipment systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to perform basic technical analysis and identify mechanical issues.</li><li>Good understanding of production processes and food safety requirements.</li><li>Knowledge of workplace safety and quality standards.</li><li>Ability to work effectively under pressure.</li><li>Strong attention to detail and accuracy.</li><li>Good teamwork and communication skills.</li><li>Flexible and responsible approach to work.</li><li>Punctual, reliable, and accountable.</li><li>Ability to maintain company property and confidentiality.</li><li>Good interpersonal and professional skills.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Qualifications:</b></p><ul><li>Technical Diploma in Mechanics or equivalent.</li><li>High School Diploma with practical experience.</li></ul><p><b>Experience:</b></p><ul><li>Fresh Graduate.</li><li>3 years experience.</li></ul><p><br></p></div>

<p><h4>About Jumeirah</h4> <p>Jumeirah, a global leader in luxury hospitality and a member of Dubai Holding, operates an exceptional portfolio of 29 properties across 11 countries in the Middle East, Europe, and Asia. In 1999, Jumeirah changed the face of luxury hospitality with the opening of the iconic Jumeirah Burj Al Arab and the brand is now renowned worldwide for its distinguished beachfront resorts, esteemed city hotels and exclusive residences. From the contemporary Maldivian island paradise at Jumeirah Olhahali Island to the art-inspired Jumeirah Capri Palace in Italy and the modern twist on a British classic at Jumeirah Carlton Tower in London, the brand has become synonymous with warm and generous service and the ability to craft distinctive and purposeful experiences that bring joy to guests from across the world.</p> <h4>About Jumeirah Messilah Beach</h4> <p>Jumeirah Messilah Beach is a beachfront resort in Kuwait, set in a secluded location with easy access to the city’s business district, airport and main attractions. The property offers a range of dining destinations, wellness experiences at Talise Spa, and dedicated facilities for meetings and events. Ideal for both business and leisure, it blends comfort, connectivity, and Arabian hospitality.</p> <h4>About the Job</h4> <p>An exciting opportunity has arisen for a Plumbing Technician to join the Engineering team at Jumeirah Messilah Beach.</p> <p>The main duties and responsibilities of this role include:</p> <ul> <li>Carry out preventive and corrective maintenance on all plumbing systems including water supply lines, drainage systems, pumps, water heaters, and sanitation fixtures.</li> <li>Inspect and repair leaks, clogs, and malfunctions in guest rooms, public areas, and service areas.</li> <li>Maintain proper and safe condition of all plant, plant rooms, equipment and work areas.</li> <li>Comply with JEMS and all fire, life, health, and safety standards.</li> <li>Install, replace, and maintain plumbing fixtures such as faucets, sinks, toilets, showers, and valves.</li> <li>Maintain and service water filtration, softening, and treatment systems.</li> <li>Maintain hot and cold-water systems, including calorifiers, boilers, circulation pumps, swimming pools, and fountains.</li> </ul> <h4>About You</h4> <p>The ideal candidate for this position will have the following experience and qualifications:</p> <ul> <li>Hold a diploma or certificate in plumbing / mechanical maintenance or related technical field.</li> <li>Demonstrate good oral and written communication is an advantage.</li> <li>Have at least a grade 10 level in education with a good moral background in educational attainment.</li> <li>Possess software competencies – Microsoft Office programs (intermediate).</li> <li>Have 1+ years of experience in the technical department.</li> </ul> <h4>About the Benefits</h4> <p>Besides generous F&B benefits and reduced hotel rates across our hotels globally, this role has excellent employee benefits making the role attractive to high performers and any applicant who likes to associate himself or herself with one of the most luxurious brands in the hospitality industry.</p></p><p></p>

<p><h4>Job Description</h4> <p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering and consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation.</p> <p>Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro-mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment, and servicing requirements necessary to assure measurement traceability. Directs, conducts, and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques.</p> <p>Responsible for laboratory facility and related environmental control development, operation, and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with power production and facilities.</p> <p>It is anticipated that engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the contractor lead.</p> <h4>Qualifications</h4> <ul> <li>An associate’s degree in mechanical engineering, physics, or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR;</li> <li>Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li> <li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing, and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li> <li>Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li> <li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li> <li>Must have an active secret US government clearance.</li> <li>US citizenship is required to obtain a secret clearance.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Develop technical specifications, scopes of work, and procurement documents for IAQ and environmental systems. Review engineering drawings, technical datasheets, product catalogs, test reports, and manufacturer documentation. Evaluate supplier technical proposals and verify compliance with project specifications and applicable standards. Prepare technical bid evaluation reports and provide recommendations for supplier selection. Ensure procured equipment complies with applicable environmental, health, and safety regulations. Manage procurement activities from technical evaluation through delivery, installation, and warranty support. Maintain technical documentation, procurement records, equipment specifications, and asset information.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in environmental engineering, Environmental Science, Chemical Engineering, Industrial Engineering, or a related field. Minimum experience in technical procurement, engineering, HVAC, indoor air quality, environmental systems, or related technical fields. Experience with public-sector procurement, EPC projects, or facility management is an advantage.</p><p></p></section>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul>

<p>Role &amp; Responsibilities We are seeking experienced Service Engineers, Senior Service Technicians, and Service Technicians for a leading Industrial Service Company in Kuwait specializing in compressed air systems. The candidate should have hands-on experience in maintenance, troubleshooting, overhaul, installation, commissioning, and repair of oil-injected rotary screw air compressors and compressed air dryers.</p><p>Compressor Brands Experience (Any One or More)</p><ul><li>Atlas Copco</li><li>Ingersoll Rand</li><li>Gardner Denver</li><li>Kaeser</li><li>Sullair</li><li>CompAir</li><li>ELGi</li><li>Chicago Pneumatic</li><li>Quincy</li><li>BOGE</li><li>Other internationally recognized industrial compressor brands</li></ul><p>Key Responsibilities</p><ul><li>Preventive and corrective maintenance of rotary screw air compressors.</li><li>Troubleshooting mechanical and electrical faults.</li><li>Major overhaul of compressor packages.</li><li>Airend inspection, repair, and replacement.</li><li>Bearing replacement and mechanical seal replacement.</li><li>Motor replacement and alignment.</li><li>Coupling alignment using dial indicators or laser alignment tools.</li><li>Maintenance of belt-drive and direct-drive compressor systems.</li><li>Oil system and cooling system servicing.</li><li>Replacement of oil separators, oil filters, and air filters.</li><li>Inlet valve, blowdown valve, minimum pressure valve, and thermostatic valve overhaul.</li><li>Solenoid valve troubleshooting and replacement.</li><li>Leak detection and repair.</li><li>Installation and commissioning of compressors after overhaul.</li><li>Performance testing and fault diagnosis.</li><li>Preparation of service reports and customer support documentation.</li></ul><p>Electrical Responsibilities</p><ul><li>Troubleshooting industrial electric motors.</li><li>Working knowledge of Star-Delta starters.</li><li>Experience with Soft Starters.</li><li>Experience with VFD/VSD drives.</li><li>Electrical control panel troubleshooting.</li><li>PLC and electronic compressor controller diagnostics.</li><li>Pressure and temperature sensor troubleshooting.</li><li>Reading and understanding electrical wiring diagrams.</li><li>Electrical fault diagnosis using multimeters and clamp meters.</li></ul><p>Air Dryer Experience</p><ul><li>Refrigerated Air Dryers.</li><li>Heatless Desiccant Dryers.</li><li>Heated Desiccant Dryers.</li><li>Automatic Condensate Drain Systems.</li><li>Air Filtration Systems.</li><li>Moisture Separators.</li><li>Dew Point Controllers.</li></ul><p>Tools Knowledge</p><p>Candidates should be familiar with :</p><ul><li>Dial Indicators</li><li>Laser Alignment Tools</li><li>Torque Wrenches</li><li>Bearing Pullers</li><li>Hydraulic Presses</li><li>Multimeters</li><li>Clamp Meters</li><li>Megger (Insulation Resistance Tester)</li><li>Pressure Gauges</li><li>Infrared Temperature Guns</li><li>Vibration Meters</li></ul><p>Other Requirements</p><ul><li>Good communication skills in English.</li><li>Ability to work independently at customer sites.</li><li>Strong troubleshooting skills.</li><li>Safety-conscious and team-oriented attitude.</li><li>Valid Passport preferred.</li><li>Ready to relocate to Kuwait.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Preferred Candidate Profile</h3><p>Qualification</p><ul><li>ITI Mechanical / Electrical</li><li>Diploma in Mechanical Engineering</li><li>Diploma in Electrical Engineering</li><li>Equivalent Technical Qualification</li></ul><p>Experience</p><ul><li>3 to 15 years of relevant experience in industrial air compressor service and maintenance.</li><li>Hands-on field service experience is mandatory.</li><li>Experience in shutdowns, commissioning, and troubleshooting preferred.</li><li>Gulf experience will be an added advantage.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Supply Technician II assists with documents pertaining to work orders completed within the MST (Maintenance Support Team) and is responsible for the OMDAC-SWACA calibration program. Provides weekly/monthly maintenance work order reports within the section and performs technical supply management tasks (e.g., inventory management, storage management, maintenance tagging of equipment). Has knowledge of supply operations and program requirements and the ability to apply established supply policies, day-to-day servicing techniques, regulations, and procedures. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Ability to obtain a National Agency Check with Inquires (NACI) to obtain a Common Access Card (CAC).</li><li>Ability to obtain and maintain a Secret level security clearance is preferred.</li><li>One-year related experience may be substituted for one year of education, if degree is required.</li><li>High School diploma or GED required.</li><li>Some college preferred.</li><li>IASSC: Lean Six Sigma: Green Belt preferred</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience.</li><li>A minimum of five years experience in Supply operations.</li><li>Experience with automated supply management systems.</li><li>Must be able to obtain a forklift license.</li><li>Experience with a customer service-oriented company.</li><li>At least two years of supervisory or lead experience is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<p>Operation and Maintenance (O&amp;M) of the Digital Small Switch DSS-2A Monitor trunk and circuit outages as well as the administrative terminal and Enhanced Command Console (ECC). Perform direct trunk dialing checks over trunk channels associated with the switch to ensure satisfactory operation of voice circuits (at least once each shift and following any trunk failure). Perform Preventive Maintenance Inspections (PMIs) on the switch and peripheral equipment. Conduct systems checks every 2 hours. Create and update databases in the administrative terminal using information received from users, Raytheon, and DISA. Perform database backups to CD-R discs. Perform database downloads to update switch configurations. Update and print out telephone console information and line strips for users. Fabricate custom interface cables using hand tools and wiring diagrams. Escort individuals requiring access to the Red Switch in the performance of their duties. Ensure that all outages are reported in a timely manner to the DISA GNOSC, NOC-K, TCF, V2X management for tracking in Army Enterprise Service Management Platform (AESMP) ticketing system. Provide hourly status updates to designated agencies regarding outages, etc. Annotate all activities in the Master Station Log (MSL) database. Prepare call detail history reports for DISA and military personnel as directed. Contribute to weekly reports with regard to your additional duties and other assigned tasks. Complete individual timesheets on a daily basis. Check the Regional Cyber Center (RCC) website for accuracy regarding authorized service interruptions (ASIs) and outages. Initiate Quality Control checklists as they pertain to your additional duties. Update training records as needed. Update memorandums and technical drawings (including block diagrams and schematics) as directed. Inventory Communications Security (COMSEC) equipment and document DA Form 2653-R (each shift). Work with military technical monitor(s), Special Security Office (SSO) and other Department of Defense contractors and civilians including local hires in support of the DRSN mission. Interface with technicians from Outside Plant, DPW, FMO etc. regarding installations in support of the DRSN mission. Coordinate with the Raytheon Help Desk for troubleshooting problems that cannot be resolved locally. Contact the Return Merchandise Authorization (RMA) Help Desk in order to obtain an RMA for processing Depot equipment repairs. Performs other duties and assignments as required.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Active Top Secret SSBI within the past two years.</li><li>Individual must be eligible for Sensitive Compartmentalized Information (SCI) Access.</li><li>High School Diploma required.</li><li>Bachelor s Degree in IT or related field preferred.</li><li>Cardiopulmonary Resuscitation (CPR) ( Provided by contract )</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree.</li><li>Seven years experience in Communications-Electronics Maintenance functions: installation, troubleshooting and repair of electronic communications equipment.</li><li>Use of phone Digital sender, and desktop computer in a fast-paced office environment is desirable.</li><li>A working knowledge of Microsoft Office software is required.</li><li>Must be able to work rotating shift schedules which provide 24-hour day/7-day week coverage.</li><li>Military or civilian technical training course of six (6) months or more is required.</li><li>This should be followed by a minimum of 24 months of on-the-job training (OJT).</li><li>A certificate of completion will suffice until verification of the training on your DD-214 can be completed.</li><li>Experience with a customer service-oriented company</li></ul>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <b>Job Summary</b> </p> <p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. </p> <p> </p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. </p> <p> </p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. </p> <p> </p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.<b> </b> </p> <p> </p> <p> <b>Essential Responsibilities: </b> </p> <p> </p> <p> Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. </p> <p> Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. </p> <p> Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. </p> <p> Inspect bomb release systems and missile launchers to determine need for repair or destruction. </p> <p> Assist in management of all inspection, maintenance, and storage of munitions and support equipment. </p> <p> Support quality assurance, compliance, continuity, and standardization of munitions programs. </p> <p> Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. </p> <p> Maintain weapons certification and currency. </p> <p> Assist with availability and serviceability of munitions to support and meet customer requirements. </p> <p> Perform all other duties as assigned or requested.</p> <p> </p> <p> <b>Minimum Requirements:</b> </p> <p> </p> <p> Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. </p> <p> Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. </p> <p> Completed USAF Munitions/Weapons Tech School or DoD equivalent. </p> <p> Must possess basic knowledge of technical publications related to aircraft maintenance. </p> <ul> <li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li> </ul> <p> Must be able to inspect and operate ground support and auxiliary equipment. </p> <p> Must achieve a passing grade in all required courses/certifications for continued employment, as needed. </p> <p> Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. </p> <ul> <li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li> </ul> <p> Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. </p> <p> Must be able to speak, read, write, and understand English. </p> <p> Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. </p> <p> Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</p> <p> Must submit updated SF-86 within 30 days of hire start date. </p> <p> Must have current/active State Issued Driver s License. </p> <p> Must be able to acquire and maintain a valid flight-line Government Driver s License. </p> <p> Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. </p> <p> Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p> </p> <p> <b> Preferred Qualifications:</b> </p> <p> <b> </b> </p> <p> Associate degree in a relevant career field. </p> <p> RPA Deployment Experience. </p> <p> Prior Experience as a Defense Contractor. </p> <p> Munitions/Weapons experience within the last 10 years<b>. </b> </p> <p> </p></div></section>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<strong>Overview</strong> <br> <br> <p> <strong>**This position will be physically located in Kuwait**</strong> </p> <p> </p> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <p> </p> <p>Under the supervision of the Project Manager (PM), the Lead Technical Inspector (Quality Assurance) performs Field and Sustainment-Level Initial, In-Process, Verification, and Final Inspections of equipment and process outputs, in support of LOGCAP V Contract. As Lead technical Inspector, provide technical guidance and supervision to subordinates. Perform estimated Cost of Damage (ECOD), Actual Cost of Damage (ACOD), Estimated Costs of Fabrications (ECOF) and Estimated Cost of Repair (ECOR) inspections and verify condition codes. Performs Quality Assurance/Quality Control (QA/QC) functions. Understands all shop functional requirements and provides assistance and coverage whenever needed.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <em> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span></em> </p> <ul> <li> <p>Perform initial, in-progress and final inspections on IAW applicable Army Regulations, Technical Manual &amp; Industry Standards.</p> </li> <li> <p>Reads blueprints, sketches and modification orders to plan the process and layout to be performed in an expeditious, economical and effective manner.</p> </li> <li> <p>Input all deficiencies and shortcoming as well as parts needed in GCSS-Army </p> </li> <li> <p>Conduct research for manuals and parts</p> </li> <li> <p>Determines type and quantity of material, and orders material required to perform repair or fabrication IAW customer work request.</p> </li> <li>Assists in coaching subordinates in ensuring all current Internal Operating Procedures (IOP) and quality regulations are complied with.</li> <li>Completes and reviews work order documentation to ensure for accuracy and completeness.</li> <li>Responsible for observing all current ES&amp;H and fire regulations. Ensures a safe work area by ensuring employees are utilizing appropriate personal protective equipment (PPE), warning devices, and proper vehicle/equipment placement.</li> <li>Prepares necessary paperwork showing labor and supplies used for job order.</li> <li>Uses proper Test, Measurement and Diagnostic Equipment (TMDE) in the daily operations phase.</li> <li>Interprets technical references.</li> <li>Performs other duties and assignments as required.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Education/Certifications: </strong> <br> <ul> <li>One year related experience may be substituted for one year of education, if degree is required.</li> <li>High school diploma or equivalent. Must provide a copy of the diploma.</li> <li>Formal training (completion of MOS 91C, D, J or L course conducted under the auspices of the USA Ordinance School) is mandatory or meet verifiable civilian acquired skills criteria. </li> <li>Must be CAC eligible and/or able to obtain a Common Access Card (CAC)</li> <li>Must be a U.S. Citizen</li> <li>A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required.</li> <li>A valid driver s license and the ability to obtain a U.S. Government Motor Vehicle Operator s License and Kuwait Heavy Duty Driver s License.</li> </ul> </li> <li> <strong>Experience:</strong> <br> <ul> <li>Minimum of (2) years of experience as a heating, ventilation, and air conditioning (HVAC) technician; or a combination of formal training and experience totaling.</li> <li>A minimum of 8-10 years of experience performing technical inspection of tactical military equipment is required with a minimum of two (2) years of experience in supervisory leadership.</li> </ul> </li> <li> <strong>Skills:</strong> <br> <ul> <li>Strong interpersonal and negotiation skills.</li> <li>Collaborative work style fostering cooperation and teamwork.</li> <li>Ability to work effectively with employees and management of all levels to include multi-national staff, superiors, and ranking military officers.</li> <li>Ability to handle confidential company and employee information with complete discretion.</li> <li>High-level communication skills in English, both verbally and written.</li> <li>Basic proficiency in Word, Excel, and Outlook applications.</li> <li>High-level organization and planning skills so workflow is managed efficiently and accurately.</li> <li>Ability to read, analyzes, and interprets reports and documents.</li> <li>Expert knowledge in welding and repair requirements for military equipment/ferrous and nonferrous metals using oxyacetylene, electric arc, and inert gas welding equipment.</li> <li>Expert knowledge of Field Level Maintenance Metal Worker tasks.</li> <li>Ability to obtain a CAC and GCSS-Army access.</li> </ul> </li> <li> <strong>Working Conditions:</strong> <br> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <br> <ul> <li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li> <li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li> <li>Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> <p> </p>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>Laserfiche Administration: Configure, maintain, and troubleshoot Laserfiche workflows, repositories, and integrations.</strong></p></li><li><p>System Support: Provide technical support for archive and correspondence applications, ensuring high availability and performance.</p></li><li><p>Database Management: Administer MS-SQL databases, including performance tuning, backup, and recovery.</p></li><li><p>Server &amp; Storage Management: Oversee server infrastructure and storage systems, ensuring reliability, scalability, and security.</p></li><li><p>Incident Resolution: Diagnose and resolve application, server, and database issues in collaboration with vendors and internal teams.</p></li><li><p>Documentation: Maintain clear technical documentation, SOPs, and escalation procedures.</p></li><li><p>User Training: Support end-users with training, guidance, and troubleshooting assistance.</p></li><li><p>Compliance &amp; Security: Ensure systems adhere to organizational policies, data protection standards, and IT governance frameworks.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Computer Science, Information Technology, or related field.</p></li><li><p>Proven experience in Laserfiche system administration.</p></li><li><p>Strong knowledge of Microsoft OS environments (Windows Server, Active Directory).</p></li><li><p>Hands-on expertise with MS-SQL (queries, stored procedures, optimization).</p></li><li><p>Experience in server and storage administration (SAN/NAS, virtualization, backup solutions).</p></li><li><p>Familiarity with ITIL practices and enterprise support frameworks.</p></li><li><p>Excellent problem-solving, communication, and documentation skills.</p></li><li><p>Ability to work independently and collaboratively across ministries and vendors.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a highly skilled Business Systems Analyst with extensive experience in supply chain planning and execution applications, particularly within the Oracle ecosystem. As an Oracle Supply Chain Planning Business Specialist, you will collaborate closely with stakeholders across the organization to analyze business needs, optimize processes, and implement effective solutions using Oracle Applications best practices. A deep understanding of supply chain planning processes, strong analytical abilities, and excellent communication skills are essential for this role. You will be responsible for managing the supply chain planning modules with Oracle E-Business Suite (EBS) and helping organization in cloud migration process.</p><p>Responsibilities:</p><ul><li>Application implementation and Support : Lead the implementation, extension, and enhancement of Oracle Supply Chain Planning modules (such as Demand Planning, Advanced Planning and Scheduling, Inventory Management, and Procurement etc.). Provide ongoing support and maintenance for Oracle Applications, ensuring system stability, availability, and performance.</li><li>Requirements Gathering &amp; Analysis : Collaborate with business stakeholders to understand and document business requirements. Analyze existing processes and systems to identify areas for improvement and optimization.</li><li>Business Process Optimization : Promote and implement process improvements to enhance efficiency and accuracy in supply chain planning and operations. Collaborate with cross-functional teams to integrate Oracle applications with other enterprise tools and applications.</li><li>Continuous Improvement : Lead the planning, configuring, testing and implementation of application updates and upgrades following best practices. Stay current with Oracle product updates and emerging technologies, applying this knowledge to drive continuous improvement.</li><li>Project Management: Manage projects from inception to completion, including planning, execution, monitoring, and closing. Coordinate with cross-functional teams to ensure project deliverables are met on time and within budget.</li><li>Data Security: Ensure data integrity and security across Oracle platforms.</li><li>Service Management : Take ownership and resolve service requests within SLA (Service Level Agreement) timelines. Use current change control standards and SDLC to successfully implement solutions</li><li>Training and Development : Organize training sessions to share knowledge with the stakeholders, keeping them up to date with the latest features and functionalities within the applications.</li><li>Documentation : Ensure accurate and up-to-date documentation of system configurations, processes, procedures, user guides for existing and new applications. Create and deliver training materials and sessions for end-users and stakeholders.</li><li>Reporting and Business Analytics : Prepare reports, interpret complex data, and provide actionable insights.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><strong>Education:</strong> bachelor's or master's degree in computer science, Information Systems, or a related field.</li><li><strong>Experience:</strong> 5 to 8 years of experience with supply chain planning modules in Oracle eBusiness Suite, Oracle Cloud Fusion applications. Strong understanding of supply chain planning processes and best practices.</li><li><strong>Communication Skills:</strong> Excellent verbal, written communication and interpersonal skills are crucial for interacting and collaborating with team members and stakeholders effectively at all levels.</li><li><strong>Analytical Skills :</strong> Strong analytical, troubleshooting, performance tuning, and debugging skills. Problem-solving skills are necessary for identifying root causes of issues and implementing effective solutions.</li><li><strong>Project management :</strong> Experience in Waterfall and Agile Methodology.</li><li><strong>Time Management :</strong> Effective time management and organizational skills are necessary to prioritize tasks and meet deadlines.</li><li><strong>Strategic Thinking :</strong> Ability to think strategically and align the solution deliverables with the organization s goals and objectives.</li><li><strong>Technical Skills:</strong> Oracle Database : SQL Application Technology : Oracle Alerts, Oracle Business Events, Workflow, Forms personalization Integration Technologies : Oracle Integration Cloud (OIC), Integration SOA Gateway, Rest APIs Cloud : Oracle Cloud Infrastructure and Cloud migration strategies. Reporting and analytics with Oracle applications (Standard reports), Enterprise Command Center</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Red Switch Technician II will supervisor Red Switch Technician I personnel and operate and maintain (O&amp;M) the Defense Red Switch Network (DRSN) facility in accordance with Defense Information Systems Agency (DISA) regulations and guidelines. Responsible for organizing and implementing system and facility upgrades with Raytheon, DISA, and local agencies. Prepare and maintain DRSN facility in accordance with various agency checklist requirements such as Quality Control (QC), DRSN Security, DISA Performance Evaluation (PE), Communications Security (COMSEC), etc. Train DRSN technicians and military deployment teams on operation, maintenance, and troubleshooting of equipment. Brief various levels of management within the civilian and military sector on DRSN operations and requirements. Responsible for ensuring subscribers are trained on the features and capabilities of their phone instruments and are operating their DRSN phones within the prescribed security requirements. Responsible for providing DRSN Operations and Maintenance (O&amp;M) support. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + O&amp;M of the Digital Small Switch (DSS-2A). Monitor trunk and circuit outages as well as the administrative terminal and Enhanced Command Console (ECC). + Perform direct trunk dialing checks on trunk channels associated with the switch to ensure satisfactory operation of voice circuits (at least once each shift and following any trunk failure). + Perform Preventive Maintenance Inspections (PMIs) on the switch and peripheral equipment. + Create and update databases in the administrative terminal using information received from users, Raytheon, and DISA. + Perform database backups to CD-R discs. + Perform database downloads to update switch configurations. + Update and print out telephone console information and line strips for users. + Fabricate custom interface cables using hand tools and wiring diagrams. + Escort individuals requiring access to the Red Switch in the performance of their duties. + Ensure that all outages are reported in a timely manner to the DISA GNOSC, NOC-K, TCF, V2X management for tracking in Army Enterprise Service Management Platform (AESMP) ticketing system. + Provide hourly status updates to designated agencies in regard to outages, etc. + Annotate all activities in the Master Station Log (MSL) database. + Prepare call detail history reports for DISA and military personnel as directed. + Contribute to weekly reports with regard to your additional duties and other assigned tasks. + Complete individual timesheets on a daily basis. + Check the Regional Cyber Center (RCC) website for accuracy with regard to authorized service interruptions (ASIs) and outages. + Initiate Quality Control checklists as they pertain to your additional duties. + Update training records as needed. + Update memorandums and technical drawings (including block diagrams and schematics) as directed. Inventory Communications Security (COMSEC) equipment and document DA Form 2653-R (each shift). + Work with military technical monitor(s), Special Security Office (SSO) and other Department of Defense contractors and civilians including local hires in support of the DRSN mission. + Interface with technicians from Outside Plant, DPW, etc. regarding installations in support of the DRSN mission. + Coordinate with the Raytheon Help Desk for troubleshooting problems that cannot be resolved locally. + Contact the Return Merchandise Authorization (RMA) Help Desk in order to obtain a RMA for processing depot equipment repairs. + Performs other duties and assignments as required. Qualifications + Qualifications: + Security Clearance: + Active Top Secret SSBI within the past two years. + Individual must be eligible for Sensitive Compartmentalized Information (SCI) Access. + Education / Certifications: One year of related experience may be substituted for one year of education, if a degree is required. + High School Diploma required. + Bachelor’s Degree in IT or related field preferred. + Cardiopulmonary Resuscitation (CPR) (Training provided by contract) + This position requires candidates to adhere to DISA requirement. All candidates are required to maintain at least one (1) baseline certification. + The authorized certification for this job title are listed as follows: + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + Seven years’ experience in Communications-Electronics Maintenance functions: + installation, troubleshooting and repair of electronic communications equipment. + Use of phone + Digital sender, and desktop computer in a fast-paced office environment is desirable. + A working knowledge of Microsoft Office software is required. Must be able to work rotating shift schedules which provide 24-hour day/7-day week coverage. + Military or civilian technical training course of six (6) months or more is required. + This should be followed by a minimum of 24 months of on-the-job training (OJT). + A certificate of completion will suffice until verification of the training on your DD-214 can be completed. + Experience with a customer service-oriented company. + SUPERVISORY / BUDGETARY RESPONSIBILITIES + At least two years of supervisory or lead experience is preferred. + Update proprietary applications regarding: + Update section employee daily status, leave, sick, on site, etc. + Verify and track accomplishment of section monthly or quarterly safety and compliance training + Purge section employee expired certifications + Verify section employee compliance training in Virtual Training Record + Verify section vehicle logs are being kept accurately and uploaded + Ensure section personnel are maintaining their 8570 / 8140 certifications + Review weekly training compliance reports for accomplishment prior to suspense. + Review and approve leave forms ensuring before approval all compliance training is current. + Coordinate transportation and integration of new and returning employees. + Document and promptly counsel poor performance and policy violations. + Enforce all V2X, GO 1, and dress code policies. + Provide annual employee appraisal feedback in a professional and constructive manner. + Demonstrate V2X values Integrity, Respect, Responsibility, and Professionalism. + Ensure the safety of personnel and monthly safety inspections are properly conducted. + Communicate effectively up and down the chain of command. + Manage work schedules. + Conduct proper new and returning employee orientation and ensure employee thorough understanding and can accomplish all tasks in the Employee Job Certification (EJC) + Work with employees and HR when emergencies or abnormal circumstances occur. + To the best of your ability render all decisions based upon our company values and principles of Integrity, Respect, Responsibility, and Professionalism. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>