وظائف لخريجي كلية التربية في الكويت

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. DFAC Shift Lead is responsible for monitoring other country national employees in the performance of food service operations and provide supply movement support for the rations warehouse. Support to include off-loading subsistence and supply items, removing delivered items from pallets and storing items per PWS requirements. Responsibilities + Shall conduct food handling, storage, receiving and transferring of subsistence in strict accordance with the applicable Tri-Service Food Code and keep records of all food received and stored as required, verifying proper handling and storage procedures are used. + Responsible for escorting/monitoring other country national employees and vendors in accordance with the performance work statement for subsistence and dining facility services. + Responsible for communicating and upholding company standards, leading by example, working as a team to provide professional food services. + Shall operate up to a 2.5-ton reefer truck and up to 10k forklift. + Shall assist the Storeroom and DFAC Supervisors as required to operate food service services 24/7/365. + Comply with all applicable Government and corporate regulations, policies and procedures: AFI 34-239, Food Service Management Program, AFMAN 34-240, Food Service Program Management, and the Tri-Service Food Code. + Follow HACCP procedures. + Responsible for ensuring a safe, clean, sanitary, healthy, presentable, professional atmosphere, free of dust, clutter and trash in all working facilities, areas and grounds. + Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). + Responsible for precise execution of company time reporting procedures and accurate completion of timesheet. + Performs other duties as assigned. + The preceding job description has been designed to indicate the general nature and essential duties and responsibilities of work performed by employees within this classification. It may not contain a comprehensive inventory of all duties, responsibilities and qualifications required of employees to perform this job. Qualifications Education/Certifications: + Must have a High School diploma or equivalent + Must be certified to drive a 2.5-ton reefer truck and up to 10K forklift. + Must have and maintain a current Serve-Safe certification (Within 3 years). + Must have a current, valid U. S. Passport and U. S. or Local Driver’s License. + Must have and maintain a valid U. S. SECRET or Interim Secret Security Clearance prior to deployment. + Must be able to read, write, speak and understand English fluently. + Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc. + Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DoD provided protective gear. Experience: + A minimum of one (1) year of related work experience in food service warehousing and storage procedures of perishable and non-perishable subsistence and shall be familiar with manual and automated supply accounting systems, policies and procedures. Skills: + Must be knowledgeable in Tri-Service Food Code, AFMAN 34-240, Food Service Program Management Armed Forces Recipe System, inventory control, HACCP, and the U.S Department of Health and Human Services Food Code standards. + Thorough understanding of quality customer food service and preparation of nutritional meals. + Must be able to work under pressure. + Service oriented. Working Environment + Work will be inside and outside. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The PKI Certificate Authority Engineer is required to be certified at the expert level in multiple disciplines of systems and security (e.g. MCSE &amp; CISSP). The engineer provides expert level engineering support for all Public Key Infrastructure services. A PKI Certificate Authority Engineer supports Enterprise-class infrastructure in the RCC-SWA by providing optimization, administration, and technical documentation of all Public Key Infrastructure systems. The engineer shall perform discovery, analysis, monitoring, and management of all digital certificates deployed by the Certificate Authority (CA). The position will collaborate with system owners and serve as the primary support entity for problem escalation, reporting directly to the section team lead. Broad knowledge and expert level hands-on experience in a large Enterprise are essential for success in this role. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p>Responsibilities</p><ul><li>Operate and maintain Certificate Authority Servers but not limited to databases and Hardware Security Module on NIPR, SIPR and Coalition enclaves.</li><li>Manage the CA life cycle, including generation, revocation, expiry, and updating to determine where each certificate is installed.</li><li>Troubleshoot Active Directory Certificate Services, HSMs, Certificate Enrollment Web Services, Certificate Enrollment Policy Web Service, and Internet Information Services (IIS).</li><li>Aid with defining and developing the strategic plan for Public Key Infrastructure (PKI) and assist with the implementation of PKI and other certificate related technologies.</li><li>Create and maintain system documentation for certificate-based technologies, including installation, configuration, and appropriate troubleshooting steps.</li><li>Improve existing processes through solutions to recurring problems and enhancements to existing solutions or documentation.</li><li>Performs other duties and assignments as required.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Qualifications</b></p><p>Security Clearance: Requires an active Secret Clearance</p><p>Education / Certifications: One-year related experience may be substituted for one year of education, if degree is required. Bachelor s Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. The authorized certifications for this job title are listed as follows:</p><p>BASELINE: Cisco: CCNP Security CompTIA: CASP+ ce: Advanced Security Practitioner GIAC: GCED: Certified Enterprise Defender GIAC: GCIH: Certified Incident Handler ISACA: CISA: Certified Information Systems Auditor ISC2: CCSP Certified Cloud Security Professional ISC2: CISSP ( or Associate ): Certified Information Systems Security Professional</p><p>COMPUTING ENVIRONMENT (CE): Microsoft: 365 Certified: Enterprise Administrator Expert Microsoft: Certified: Azure Database Administrator Associate Microsoft: Certified: Azure Security Engineer Associate Microsoft: Certified: Azure Solutions Architect Expert Microsoft: MCSA: Cloud Platform Microsoft: MCSA: Windows Server 2012 Microsoft: MCSA: Windows Server 2016 Microsoft: MCSE: Cloud Platform and Infrastructure Microsoft: MCSE: Core Infrastructure Microsoft: MCSE: Data Management and Analytics Microsoft: MCSE: Productivity Solutions Expert Microsoft: MCSE: Server Infrastructure 2012</p><p>Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. At least five (5) years of practical experience working with:</p><ul><li>MS Active Directory Domain Services</li><li>MS Active Directory Certificate Services ( AD CS )</li><li>Public Key Infrastructure ( PKI )</li><li>Cryptography Standards</li><li>Managing keystores ( JKS, JCEKS, PKCS #12 )</li><li>Windows MSCS) and trust stores</li><li>Hardware security modules ( HSM's )</li><li>Key management services ( KMS )</li><li>Online Certificate Status Protocol ( OCSP )</li><li>Two-factor authentication: RSA, Smartcards ( CAC ).</li></ul><p>Understanding of FIPS 140-2 compliance and Standard Technical Implementation Guides ( STIGs ).</p><p>Experience with a customer service-oriented company.</p><p>Skills &amp; Technology Used: Ability to troubleshoot servers and infrastructure equipment, assess networking requirements and provide solutions, and make accurate and independent decisions under pressure. Excellent organizational, interpersonal, written, and verbal communication skills. Ability to perform comfortably in a fast-paced, deadline-oriented work environment and to successfully execute many complex tasks simultaneously. MS Active Directory Domain Services. MS Active Directory Certificate Services (AD CS ). Public Key Infrastructure ( PKI ). Cryptography Standards. JKS, JCEKS, PKCS #12, Windows MSCS. </p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The Maintenance Controller for the Kuwait KC-130J Program at Al Mubarak airfield in Kuwait has is responsible for assisting the Maintenance Manager in daily operation and management and administration of the aircraft maintenance program, maintenance personnel, and maintenance actions required to support the customer’s missions and flight schedules. The Maintenance Controller assigns priorities and directs maintenance personnel to correct discrepancies, generate work orders, track and comply with all inspection requirements, compile and record maintenance data applicable to the Maintenance Information System (MIS), provide the ability to compare records and reports on consumption of material, quality control, and other aspects of production. Description: + Act as point of contact for all aircraft discrepancies that may affect daily operations and mission success. + Direct and coordinate all scheduled and unscheduled maintenance actions and workload planning + Attend meetings with the customer and provide information, reports, and official correspondence regarding aircraft status, mission capability, and maintenance planning information. + Coordinate with the Maintenance Manager and customer representatives in the management of scheduled and unscheduled maintenance to ensure the most efficient use of time and resources. + Analyze maintenance data to identify trends and initiate corrective actions as necessary. + Manage completion of maintenance actions and ensure the complete and accurate entry of data into the Maintenance Information System (MIS). + Coordinate with adjacent contractors and supporting agencies to acquire necessary tools, parts, support, materials, and equipment to prevent maintenance stoppages. + Ensure accuracy of documentation, (i.e., aircraft, engine, propeller, logbooks, weight and balance records, and MIS) and adherence to technical publications, policies, procedures, and safe maintenance practices. + Prepares and sends required reports and attend staff / customer meetings as required. + Coordinate troubleshooting efforts on complex maintenance discrepancies, making recommendations for courses of action based on aircraft service history analysis, applicable Maintenance Manual guidance, and operator experience. + Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts. + Monitor and track all life limited components, periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by the Periodic Maintenance Requirements Manual, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions. + Coordinate with operations personnel and aircrew members to ensure the flight schedule is adequately supported and missions are able to be conducted within prescribed timelines. + Conduct off-station maintenance when required. + Assist in the conduct of maintenance on the flight line and back shops as required to ensure aircraft are available to support the flight schedule. + When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: + High School Diploma Must be able to obtain/maintain the following required certifications/qualifications: + This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. + Aircraft Weight &amp; Balance certification + Safe for Flight certification + Aviation Gas Free Engineering (AVGFE) certification + Hydraulic Contamination certification + “I” Level &amp; “O” Level Tire &amp; Wheel certification + “I” Level MLG Brake repair / rebuilding qualification + Auxiliary Power Unit (APU) run qualification + Applicable Support Equipment licensing + Collateral Duty Inspector (CDI) qualification + Collateral Duty Quality Assurance Representative (CDQAR) qualification + Corrosion Prevention and Control and Aircraft Paint qualification + Confined Space Entry certification Experience: • Eight years’ aircraft maintenance experience with five years’ experience working on C-130J aircraft preferred. • Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. • Safe for Flight experience and certification specific to C-130J aircraft preferred. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: + Must be United States (U.S.) citizen, be able to read, write, and understand the English language + Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. + Must have a valid U.S. Driver’s License. + Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. + Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. + Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to: The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance. + As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” and “I” level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs. + Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed. + Must have an in-depth knowledge of aircraft technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be proficient in the use of Microsoft Office Programs, including Word, Excel, and PowerPoint to create/modify briefs, spreadsheets, and formal requests/documentation. + Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. + Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must perform as a team member, contributing to the success of the C-130J maintenance department. + Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. + Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness.</p><p>Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform. Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conducts off station maintenance when required. When necessary, perform other duties and functions critical to the support of the program.</p><p>Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma</li><li>Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: I Level &amp; O Level Tire &amp; Wheel certification Hydraulic Contamination certification Collateral Duty Inspector (CDI) qualification Corrosion Prevention and Control and Aircraft Paint qualification I Level Battery Maintenance certification</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.</li><li>Must have a working knowledge of first aid procedures to be used in an emergency.</li><li>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</li><li>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</li><li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li><li>Must have a valid U.S. Driver s License.</li><li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.</li><li>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.</li><li>Have a strong knowledge base of intermediate level maintenance business practices and procedures</li><li>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions.</li><li>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O level, I level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs.</li><li>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance.</li><li>Must have an in-depth knowledge of applicable technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.</li><li>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program.</li><li>Must be willing and able to work with hazardous materials and conduct specialty on-the-job training.</li><li>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.</li><li>Must have a proven ability to work independently with minimal direction.</li></ul>

<p>The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Major Job Activities Description: Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level battery maintenance functions as required per applicable maintenance manuals. Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR Performs scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment (life rafts, first aid kits, etc..), pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated aviation life support equipment, airframes, and power plants systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Conducts off station maintenance when required. When necessary, perform other duties and functions critical to the support of the program.</p><p>Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p><p>Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p><p><strong>Desired Candidate Profile</strong></p><p>Education / Certifications:<br>- High School Diploma<br>- Must be able to obtain/maintain the following required certifications/qualifications:<br>- Aviation Gas Free Engineering (AVGFE) certification<br>- Auxiliary Power Unit (APU) run qualification<br>- I Level Battery Maintenance certification<br>- Applicable Support Equipment licensing<br>- Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification<br>- Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification<br>- Corrosion Prevention and Control qualification<br>- Confined Space Entry certification<br>Experience:<br>Four years maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred.<br>Must have a working knowledge of first aid procedures to be used in an emergency.<br>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).<br>Specific Requirements:<br>Must be United States (U.S.) citizen, be able to read, write, and understand the English language<br>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.<br>Must be able to obtain and maintain at a Secret Security Clearance.<br>Must have a valid U.S. Driver s License.<br>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.<br>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.<br>Must be willing and able to comply with all program functional requirements to include but not limited to:<br>The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.<br>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.<br>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.<br>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.<br>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to:<br>The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance.<br>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O and I level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs.<br>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed.<br>Must have an in-depth knowledge of aircraft technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.<br>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.<br>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.<br>Must perform as a team member, contributing to the success of the C-130J maintenance department.<br>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.<br>Must have a proven ability to work independently with minimal direction.</p>

<p><h4>Job summary</h4> <p>Accountable for overall success of the daily kitchen operations. Exhibits culinary talents by personally performing tasks while leading the staff and managing all food related functions. Works to continually improve guest and employee satisfaction while maintaining the operating budget. Supervises all kitchen areas to ensure a consistent, high quality product is produced. Responsible for guiding and developing staff including direct reports. Must ensure sanitation and food standards are achieved.</p> <br> <h4>Candidate profile</h4> <br> <h4>Education and experience</h4> <ul> <li>High school diploma or GED; 4 years experience in the culinary, food and beverage, or related professional area.</li> <li>Or 2-year degree from an accredited university in Culinary Arts, Hotel and Restaurant Management, or related major; 2 years experience in the culinary, food and beverage, or related professional area.</li> </ul> <br> <h4>Core work activities</h4> <br> <h4>Ensuring culinary standards and responsibilities are met</h4> <ul> <li>Manages kitchen shift operations and ensures compliance with all food & beverage policies, standards and procedures.</li> <li>Estimates daily production needs on a weekly basis and communicates production needs to kitchen personnel daily.</li> <li>Assists executive chef with all kitchen operations and preparation.</li> <li>Prepares and cooks foods of all types, either on a regular basis or for special guests or functions.</li> <li>Develops, designs, or creates new applications, ideas, relationships, systems, or products, including artistic contributions.</li> <li>Assists in determining how food should be presented and creates decorative food displays.</li> <li>Maintains purchasing, receiving and food storage standards.</li> <li>Ensures compliance with food handling and sanitation standards.</li> <li>Performs all duties of kitchen managers and employees as necessary.</li> <li>Recognizes superior quality products, presentations and flavor.</li> <li>Ensures compliance with all applicable laws and regulations.</li> <li>Follows proper handling and right temperature of all food products.</li> <li>Operates and maintains all department equipment and reports malfunctions.</li> <li>Checks the quality of raw and cooked food products to ensure that standards are met.</li> </ul> <br> <h4>Leading kitchen operations</h4> <ul> <li>Supervises and coordinates activities of cooks and workers engaged in food preparation.</li> <li>Leads shifts while personally preparing food items and executing requests based on required specifications.</li> <li>Utilizes interpersonal and communication skills to lead, influence, and encourage others; advocates sound financial/business decision making; demonstrates honesty/integrity; leads by example.</li> <li>Encourages and builds mutual trust, respect, and cooperation among team members.</li> <li>Serves as a role model to demonstrate appropriate behaviors.</li> <li>Maintains the productivity level of employees.</li> <li>Ensures employees understand expectations and parameters.</li> <li>Establishes and maintains open, collaborative relationships with employees and ensures employees do the same within the team.</li> <li>Ensures property policies are administered fairly and consistently.</li> <li>Communicates performance expectations in accordance with job descriptions for each position.</li> <li>Recognizes success performance and produces desired results.</li> </ul> <br> <h4>Ensuring exceptional customer service</h4> <ul> <li>Provides services that are above and beyond for customer satisfaction and retention.</li> <li>Manages day-to-day operations, ensuring the quality, standards and meeting the expectations of the customers on a daily basis.</li> <li>Sets a positive example for guest relations.</li> <li>Empowers employees to provide excellent customer service.</li> <li>Interacts with guests to obtain feedback on product quality and service levels.</li> <li>Handles guest problems and complaints.</li> </ul> <br> <h4>Maintaining culinary goals</h4> <ul> <li>Achieves and exceeds goals including performance goals, budget goals, team goals, etc.</li> <li>Develops specific goals and plans to prioritize, organize, and accomplish your work.</li> <li>Utilizes the labor management system to effectively schedule to business demands and for tracking of employee time and attendance.</li> <li>Trains employees in safety procedures.</li> </ul> <br> <h4>Managing and conducting human resource activities</h4> <ul> <li>Identifies the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills.</li> <li>Improves service by communicating and assisting individuals to understand guest needs, providing guidance, feedback, and individual coaching when needed.</li> <li>Participates in the employee performance appraisal process, providing feedback as needed.</li> <li>Brings issues to the attention of the department manager and human resources as necessary.</li> </ul> <br> <h4>Additional responsibilities</h4> <ul> <li>Provides information to supervisors, co-workers, and subordinates by telephone, in written form, or in person.</li> <li>Analyzes information and evaluates results to choose the best solution and solve problems.</li> <li>Attends and participates in all pertinent meetings.</li> </ul> <br> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun.</p> <p>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Job summary</h4> <p>Functions as the strategic business leader of property operations and acts as general manager in his/her absence. Areas of responsibility include front office, retail/gift shops, recreation/fitness center, housekeeping, security/loss prevention, engineering/maintenance, food and beverage/culinary, and event management, where applicable. Position works with direct reports (executive committee members and department heads) to develop and implement the operations strategy and ensure implementation of the brand service strategy and brand initiatives. The position ensures operations meet the brand’s target customer needs, ensures employee satisfaction, focuses on growing revenues, and maximizes financial performance. As a member of the executive committee, develops and implements property-wide strategies that deliver products and services to meet or exceed the needs and expectations of the brand’s target customer and property employees and provides a return on investment.</p> <h4>Candidate profile</h4> <p><strong>Education and experience</strong></p> <ul> <li>2-year degree from an accredited university in business administration, hotel and restaurant management, or related major; 8 years’ experience in management operations, sales and marketing, or related professional area. OR</li> <li>4-year bachelor's degree in business administration, hotel and restaurant management, or related major; 6 years’ experience in management operations, sales and marketing, or related professional area.</li> </ul> <h4>Core work activities</h4> <p><strong>Managing profitability and departmental budgets</strong></p> <ul> <li>Keeps operations team focused on the critical components of operations to drive guest satisfaction and the desired financial results.</li> <li>Ensures that all operational areas have an atmosphere that is conducive to the overall guest experience.</li> <li>Reviews financial reports and statements to determine how operations is performing against budget.</li> <li>Ensures capital expenditure funds are being used to address the priorities outlined in the service strategy.</li> <li>Works with direct reports to determine areas of concern and establish ways to improve the departments’ financial performance.</li> <li>Strives to maintain profit margins without compromising guest or employee satisfaction.</li> <li>Identifies and analyzes operational challenges and facilitates the development of solutions to prevent reoccurrence.</li> <li>Coaches and supports operations team to effectively manage occupancy and rate, wages, and controllable expenses.</li> <li>Reviews the wage progress report and compares budgeted wages to actual wages, coaching direct reports to address problem areas and holds team accountable for results.</li> <li>Develops an operational strategy that is aligned with the brand’s business strategy and leads its execution.</li> <li>Makes and executes key decisions to keep property moving forward towards achievement of goals.</li> </ul> <p><strong>Managing property operations</strong></p> <ul> <li>Strives to improve service performance.</li> <li>Communicates a clear and consistent message regarding operational goals to produce desired results on a continuous basis.</li> <li>Ensures brand and regional business initiatives are implemented and communicates follow-up actions to team as necessary.</li> <li>Ensures core elements of the service strategy are in place to produce the desired results.</li> <li>Tours building on a regular basis speaking with employees and guests to understand business needs and assess operational opportunities.</li> </ul> <p><strong>Leading property operations teams</strong></p> <ul> <li>Establishes a vision for product and service delivery on property.</li> <li>Champions the brand’s service vision for product and service delivery and ensures alignment amongst the property leadership team.</li> <li>Ensures employees are treated fairly and equitably.</li> </ul> <p><strong>Managing and conducting human resources activities</strong></p> <ul> <li>Observes service behaviors of employees and provides feedback to individuals and/or managers.</li> <li>Hires operations management team members who demonstrate strong functional expertise, creativity, and entrepreneurial leadership to meet the business needs of the operation.</li> <li>Conducts annual performance appraisals with direct reports according to standard operating procedures.</li> <li>Utilizes an “open door” policy and reviews employee satisfaction results to identify and address employee problems or concerns.</li> <li>Stays knowledgeable of leadership talent in the property.</li> <li>Fosters employee commitment to providing excellent service, participates in daily stand-up meetings, and models desired service behaviors in all interactions with guests and employees.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p> <p>JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J. Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates</p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>JOB SUMMARY<br>Functions as the strategic business leader of property operations and acts as General Manager in his/her absence. Areas of responsibility include Front Office, , Retail/Gift Shops, Recreation/Fitness Center, Housekeeping, Security/Loss Prevention, Engineering/Maintenance, Food and Beverage/Culinary and Event Management, where applicable. Position works with direct reports (Executive Committee members and department heads) to develop and implement the operations strategy and ensuring implementation of the brand service strategy and brand initiatives. The position ensuring operations meet the brand’s target customer needs, ensuring employee satisfaction, focuses on growing revenues and maximizes financial performance. As a member of the Executive Committee, develops and implements property-wide strategies that deliver products and services to meet or exceed the needs and expectations of the brand’s target customer and property employees and provides a return on investment.<br>CANDIDATE PROFILE&nbsp;<br>Education and Experience<br>• 2-year degree from an accredited university in Business Administration, Hotel and Restaurant Management, or related major; 8 years’ experience in the management operations, sales and marketing, or related professional area.<br>OR<br>• 4-year bachelor's degree in Business Administration, Hotel and Restaurant Management, or related major; 6 years’ experience in the management operations, sales and marketing, or related professional area.<br>CORE WORK ACTIVITIES<br>Managing Profitability and Departmental Budgets<br>• Keeps operations team focused on the critical components of operations to drive guest satisfaction and the desired financial results.<br>• Ensures that all operational areas have an atmosphere that is conducive to the overall guest experience.<br>• Reviews financial reports and statements to determine how Operations is performing against budget.<br>• Ensures capital expenditure funds are being used to address the priorities outlined in the service strategy.<br>• Works with direct reports to determine areas of concern and establishing ways to improve the departments’ financial performance.<br>• Strives to maintain profit margins without compromising guest or employee satisfaction.<br>• Identifies and analyzes operational challenges and facilitates the development of solutions to prevent reoccurrence.<br>• Coaches and supports operations team to effectively manage occupancy &amp; rate, wages and controllable expenses.<br>• Reviews the Wage Progress Report and compares budgeted wages to actual wages, coaching direct reports to address problem areas and holds team accountable for results.<br>• Develops an operational strategy that is aligned with the brand’s business strategy and leads its execution.<br>• Makes and executes key decisions to keep property moving forward towards achievement of goals.<br>Managing Property Operations<br>• Strives to improve service performance.<br>• Communicates a clear and consistent message regarding operational goals to produce desired results on a continuous basis.<br>• Ensures brand and regional business initiatives are implemented and communicates follow-up actions to team as necessary.<br>• Ensures core elements of the service strategy are in place to produce the desired results.<br>• Tours building on a regular basis speaking with employees and guests to understand business needs and assess operational opportunities.<br>Leading Property Operations Teams<br>• Establishes a vision for product and service delivery on property.<br>• Champions the brand’s service vision for product and service delivery and ensuring alignment amongst the property leadership team.<br>• Ensures employees are treated fairly and equitably.<br>Managing and Conducting Human Resources Activities<br>• Observes service behaviors of employees and providing feedback to individuals and/or managers.<br>• Hires operations management team members who demonstrate strong functional expertise, creativity and entrepreneurial leadership to meet the business needs of the operation.<br>• Conducts annual performance appraisals with direct reports according to Standard Operating Procedures.<br>• Utilizes an “open door” policy and reviewing employee satisfaction results to identify and address employee problems or concerns.<br>• Stays knowledgeable of leadership talent in the property.<br>• Fosters employee commitment to providing excellent service, participating in daily stand-up meetings and models desired service behaviors in all interactions with guests and employees.<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. <br>JW Marriott&nbsp;is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">The Transportation Lead provides comprehensive movement control, transportation synchronization, and multimodal distribution support across the USCENTCOM Area of Responsibility. This role integrates Air Coordination Cell operations, container management, convoy coordination, customer service, staging area management, and HAZMAT documentation. The position requires proficiency with IBS-CMM, CMOS, RFID systems, and compliance with DTR 4500.9-R Part II. Additionally, the role supports operational sustainment, movement control, and distribution activities for the 1st Theater Sustainment Command (1 TSC), including planning, tracking, and coordinating strategic and tactical movement of personnel, cargo, and equipment across air, land, and sea. The position ensures accurate execution of provisioning, inventory, maintenance, repair, and transportation activities while contributing to the refinement of logistics policies and the integration of processes across teams and partner organizations.HOW YOU WILL MAKE AN IMPACT:Provide leadership to CRSP teams including Line Haul, Air Coordination Cell, Container Processing, Container Fabrication, Customs Clearance, and TAS teams.Verify DD Form 1149, TAC Codes, DODAACs, shipment priority, and POC information.Receive cargo from all transportation modes and process for delivery.Validate manifests, MROs, DD Form 1149, and DD Form 1384.Prepare sensitive cargo documentation including DD Form 1387-2 and DD Form 1907.Coordinate pre-Joint Inspections and Joint Inspections.Build and inspect 463L pallets IAW DTR 4500.9-R Part II.Coordinate with KMOI and MCTs for required movement.Perform pre-JIs to ensure compliance with Air Force regulations.Transport or coordinate transportation to/from APOE/D.Prepare DD Form 1384 TCMD and complete prime/trailer card entries.Conduct export inspections with Military Customs.Compute center of balance and weight for rolling stock.Maintain historical cargo movement data across the AOR.Operate MHE including 4K 100K forklifts and container handlers.Support ocean freight movement through designated SPOE/D.Lead convoy operations ensuring preparation, safety, and accountability.Deliver daily and weekly safety briefings.Support logistics requirements through analysis, planning, and coordination.Manage LIS data including GCSS-Army.Oversee purchasing, transportation, warehousing, and production control.Ensure host-nation compliance for company/contract vehicle documentation.Plan and coordinate logistics, transportation, and customer service activities.Ensure compliance with legal, military, and ISO requirements.Plan, schedule, and track movements across all transportation nodes.Create and manage TMRs using LOADOUT and other LIS tools.Coordinate route, highway, airspace, and customs clearances.Support intermodal operations including distribution, retrograde, and onward movement.Maintain ITV using approved DoD systems.Assist with BBPCT (blocking, bracing, packing, crating, and tie-down).Participate in movement boards and multinational coordination meetings.Ensure documentation compliance per DTR 4500.9-R.Support container management and ensure accurate JCM reporting.Ensure adherence to U.S., USCENTCOM, USARCENT, and 1 TSC policies.Maintain awareness of HAZMAT requirements and ensure certification compliance.WORKING ENVIRONMENTWork is performed in outdoor, warehouse, and operational environments with potential exposure to physical, chemical, and biological hazards. PPE is required in designated areas. Must comply with OSHA, EPA, Fire Regulations, host-nation policies, and company safety standards.PHYSICAL ACTIVITIESWork requires heavy lifting up to 70 pounds, climbing, stooping, prolonged standing or sitting, and working near hazardous materials or equipment.MINIMUM QUALIFICATIONSHigh school diploma and 9 yrs of experience. (will consider other combinations of education, military, training and experience) Ability to obtain a Kuwait/Host Nation Driver s License.Minimum of seven (7) years of related logistics, transportation, distribution, movement control, or DoD operations experience. Knowledgeable in HAZMAT certification, TMR, and TCMD processing. Experience working in austere environments preferred.Supervisory, leadership, or management experience.Ability to engage with employees and customers with a service-oriented attitude.Knowledge of strategic planning, resource allocation, and workflow coordination.Strong interpersonal and negotiation skills.Ability to prioritize and manage demanding workloads.Ability to work under pressure.Intermediate proficiency in Word, Excel, and Outlook.Strong organizational and analytical skills.Ability to interpret transportation regulations including DTR 4500.9-R.Experience with stock control and asset management.Proficiency with LIS systems including LOADOUT, GCSS-Army, IGC, and JCM.Strong attention to detail.Valid US and Host Nation driver s license.Active U.S. SECRET clearance.Valid U.S. passport (minimum 2 years validity, 4 blank pages).Ability to pass CRC requirements and work a 48-hour workweek.Willingness to deploy to Iraq, Kuwait, Jordan, Saudi Arabia, Bahrain, Qatar, UAE, or other assigned areas.CERTIFICATIONSHAZMAT/HAZCOM certification (required or obtainable).Additional theater-required certifications including AT, OPSEC, Cyber, etc. GDIT IS YOUR PLACEAt GDIT, the mission is our purpose, and our people are at the center of everything we do. Growth: AI-powered career tool that identifies career steps and learning opportunities Support: An internal mobility team focused on helping you achieve your career goals Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off Community: Award-winning culture of innovation and a military-friendly workplaceOWN YOUR OPPORTUNITYExplore a career in supply chain and logistics at GDIT and you ll find endless opportunities to grow alongside colleagues who thrive on efficiency, accuracy, and accountability.</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series. Responsibilities Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: · Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. · Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. · Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. · Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. · Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. · Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. · Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. · Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. · Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><strong>Primary objective</strong></span></p><br><ul><li><span>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets Corporate, location and contractual requirements.</span></li><li><span>Manage project service and product verification and inspection the project consistent with criticality assessments and contractual and regulatory obligations.</span></li><li><span>Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits and project quality reporting and review.</span></li><li><span>Accountable for QA/QC related matters at Projects site.</span></li><li><span>Must have experienced in Inspections of all Stages of projects in Oil &amp; Gas installations and construction QA/QC works.</span></li><li><span>Excellent written, co-ordination and verbal communication skills.</span></li><li><span>Ability to develop, update and maintain in-house technical standards and specifications.</span></li><li><span>Familiarity with ISO 9000 Series and International Standards relevant to Oil and Gas Industry.</span></li></ul><p><span><strong>What you will bring:</strong></span></p><br><p><span><strong>HSE Management</strong></span></p><br><ul><li><span>Demonstrate behavior and practices consistent with Managerial, co-worker and community duty of care obligations.</span></li><li><span>Work with the Project HSE Advisor and the Project Management Team to ensure that all areas of the Project’s operations conform to applicable WorleyParsons, regulatory and contractual HSE obligations.</span></li></ul><p><span><strong>Quality Management&nbsp;</strong></span></p><br><ul><li><span>Work with the Location Quality Manager and the Project Management Team to ensure:</span></li><li><span>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS) consistent with specific location, regulatory and contractual requirements</span></li><li><span>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures and reference materials via the Project Web Site, EMS, WPMP and the Knowledge Communities as applicable.</span></li><li><span>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory and contractual obligations.</span></li><li><span>Effective planning and implementation of design control, verification, validation and review activities.</span></li><li><span>Effective implementation and coordination of vendor assessment and inspection activities.</span></li><li><span>Effective implementation and verification of construction inspection and testing activities.</span></li><li><span>Effective implementation of non-conformance, corrective action, and preventive action management processes.</span></li><li><span>Establishment of an effective risk-based audit program.</span></li><li><span>Effectiveness of Project Management Review Programs including collection analysis and reporting of project performance measures.</span></li></ul><p><span><strong>Capability Enhancement</strong></span></p><br><ul><li><span>Participate in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments.</span></li><li><span>Support in-house education, promotion and awareness programs relating to sound quality management practice and WorleyParsons quality strategies.</span></li><li><span>Facilitate the implementation of existing and new company processes and capability enhancements across the Project Operations.</span></li><li><span>Determine areas of potential improvement and, in consultation with the Location Quality Manager and Project Management Team, facilitate the implementation of improvements to address these areas and evaluate the outcomes of the improvements. if this position has determined them should not he/she take ownership)</span></li><li><span>Facilitate independent review/certification of Project Quality Management Systems in line with Corporate, legislative or customer requirements.</span></li></ul><p><span><strong>Customer Relationships</strong></span></p><br><ul><li><span>Ensure that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are being identified and managed by the Project Team effectively.</span></li></ul><p><span><strong>Resources</strong></span></p><br><ul><li><span>In conjunction with the Project Management Team and the Location Quality Manager recruit and allocate quality practitioners to project verification and inspection roles to ensure these activities are suitably resourced and</span></li><li><span>Ensure that the new quality practitioners are effectively inducted in all aspects that relate to the Quality aspects of the Project.</span></li></ul><p><span><strong>Performance Management</strong></span></p><br><ul><li><span>In conjunction with Project Management Team and the Location Quality Manager:</span></li><li><span>Provide functional leadership for project quality personnel.</span></li><li><span>Strengthen and coach project quality personnel to support development, management and administration of project quality management systems in response to project and customer expectations</span></li></ul> <p><span><strong>Qualifications / Experience</strong>:</span></p><br><ul><li><span><span>Full-time Bachelor’s Degree in Engineering (any discipline) from an accredited university</span></span></li><li><span>Minimum 8 years of total experience post graduate studies</span></li><li><span>Minimum 5 years of experience in the oil &amp; gas, refinery, or petrochemical industry</span></li><li><span>Minimum 5 years of experience as a QA/QC Engineer or equivalent</span></li><li><span>Must have experienced in Inspections of all Stages of projects in Oil &amp; Gas installations and construction QA/QC works.&nbsp;</span></li><li><span>Must have experience in developing, updating and maintaining in-house technical standards and specifications.&nbsp;</span></li><li><span>Fully conversant with NDE requirements and sour environments.</span></li><li><span>Familiarity with ISO 9000 and 14000 Series and international standards relevant to oil and gas industry.</span></li><li><span>Excellent written, coordination and verbal communication skills.</span></li></ul><br><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Security Coordinator supports the daily security operations of the University, ensuring a safe and secure environment for students, staff, visitors, and property. Under the direction of the Director of Security, this role oversees campus safety procedures, coordinates incident response, and upholds compliance with institutional security policies and protocols.</p><p>Key Responsibilities</p><ul><li>Monitor and support day-to-day campus security operations in accordance with established protocols.</li><li>Maintain student and campus safety in alignment with the University s code of conduct and security guidelines.</li><li>Implement and update campus security procedures, systems, and emergency response plans.</li><li>Assist with supervision of all entry and exit procedures for students, staff, visitors, and vendors.</li><li>Oversee vehicle and parking safety on campus, ensuring proper access control.</li><li>Prepare and issue reports, security communications, and incident summaries for management review.</li><li>Support recruitment, training, and scheduling of security personnel.</li><li>Coordinate with relevant departments on safety initiatives, emergency drills, and special event security needs.</li><li>Provide support for departmental projects and initiatives to enhance campus security infrastructure.</li><li>Perform additional duties as assigned by the Director of Security.</li></ul><p>Required Skills and Qualifications</p><ul><li>Strong communication skills in English, with the ability to engage effectively at all organizational levels.</li><li>Demonstrated knowledge of security practices; experience in campus or institutional security preferred.</li><li>Ability to work in a fast-paced environment, manage pressure, and exercise sound judgment.</li><li>Strong attention to detail, confidentiality, and professional discretion.</li><li>Proficiency in Microsoft Office applications (Word, Excel, etc.).</li><li>Ability to organize, prioritize, and meet operational deadlines.</li><li>Capacity to work collaboratively with diverse teams and stakeholders.</li><li>Willingness to work evenings, weekends, or emergencies as required.</li></ul><p>Education and Experience</p><ul><li>Bachelor s degree preferred.</li><li>Minimum three (3) years of experience in security, military, law enforcement, or related field.</li><li>Experience preparing reports and using basic computer applications.</li></ul><p>How to Apply</p><p>Interested candidates should visit the Job Opportunities section on the AIU website submit a resume and cover letter. Applications are reviewed on a rolling basis until the position is filled. The University reserves the right to close the search at any time. Only shortlisted candidates will be contacted. Submit application via: https://aiu.edu.kw/careers/jobs</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Strong communication skills in English, with the ability to engage effectively at all organizational levels.</li><li>Demonstrated knowledge of security practices; experience in campus or institutional security preferred.</li><li>Ability to work in a fast-paced environment, manage pressure, and exercise sound judgment.</li><li>Strong attention to detail, confidentiality, and professional discretion.</li><li>Proficiency in Microsoft Office applications (Word, Excel, etc.).</li><li>Ability to organize, prioritize, and meet operational deadlines.</li><li>Capacity to work collaboratively with diverse teams and stakeholders.</li><li>Willingness to work evenings, weekends, or emergencies as required.</li><li>Bachelor s degree preferred.</li><li>Minimum three (3) years of experience in security, military, law enforcement, or related field.</li><li>Experience preparing reports and using basic computer applications.</li></ul><p></p></section>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Primary objective</h4> <p>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets corporate, location and contractual requirements.</p> <p>Manage project service and product verification and inspection of the project consistent with criticality assessments and contractual and regulatory obligations.</p> <p>Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits and project quality reporting and review.</p> <p>Accountable for QA/QC related matters at project sites.</p> <p>Must have experience in inspections of all stages of projects in oil & gas installations and construction QA/QC works.</p> <p>Excellent written, coordination and verbal communication skills.</p> <p>Ability to develop, update and maintain in-house technical standards and specifications.</p> <p>Familiarity with ISO 9000 series and international standards relevant to the oil and gas industry.</p> <h4>What you will bring:</h4> <strong>HSE Management</strong><br> <p>Demonstrate behavior and practices consistent with managerial, co-worker and community duty of care obligations.</p> <p>Work with the Project HSE Advisor and the Project Management Team to ensure that all areas of the project’s operations conform to applicable WorleyParsons, regulatory and contractual HSE obligations.</p> <strong>Quality Management</strong><br> <p>Work with the Location Quality Manager and the Project Management Team to ensure:</p> <ul> <li>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS) consistent with specific location, regulatory and contractual requirements.</li> <li>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures and reference materials via the Project Web Site, EMS, WPMP and the Knowledge Communities as applicable.</li> <li>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory and contractual obligations.</li> <li>Effective planning and implementation of design control, verification, validation and review activities.</li> <li>Effective implementation and coordination of vendor assessment and inspection activities.</li> <li>Effective implementation and verification of construction inspection and testing activities.</li> <li>Effective implementation of non-conformance, corrective action, and preventive action management processes.</li> <li>Establishment of an effective risk-based audit program.</li> <li>Effectiveness of Project Management Review Programs including collection, analysis and reporting of project performance measures.</li> </ul> <strong>Capability Enhancement</strong><br> <ul> <li>Participate in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments.</li> <li>Support in-house education, promotion and awareness programs relating to sound quality management practice and WorleyParsons quality strategies.</li> <li>Facilitate the implementation of existing and new company processes and capability enhancements across the Project Operations.</li> <li>Determine areas of potential improvement and, in consultation with the Location Quality Manager and Project Management Team, facilitate the implementation of improvements to address these areas and evaluate the outcomes of the improvements. If this position has identified such areas, he or she should take ownership.</li> <li>Facilitate independent review and certification of Project Quality Management Systems in line with corporate, legislative or customer requirements.</li> </ul> <strong>Customer Relationships</strong><br> <p>Ensure that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are being identified and managed by the Project Team effectively.</p> <strong>Resources</strong><br> <ul> <li>In conjunction with the Project Management Team and the Location Quality Manager, recruit and allocate quality practitioners to project verification and inspection roles to ensure these activities are suitably resourced.</li> <li>Ensure that new quality practitioners are effectively inducted in all aspects that relate to the quality aspects of the project.</li> </ul> <strong>Performance Management</strong><br> <ul> <li>In conjunction with the Project Management Team and the Location Quality Manager, provide functional leadership for project quality personnel.</li> <li>Strengthen and coach project quality personnel to support development, management and administration of project quality management systems in response to project and customer expectations.</li> </ul> <h4>Qualifications / Experience:</h4> <ul> <li>Full-time Bachelor’s Degree in Engineering (any discipline) from an accredited university.</li> <li>Minimum 8 years of total experience post graduate studies.</li> <li>Minimum 5 years of experience in the oil & gas, refinery, or petrochemical industry.</li> <li>Minimum 5 years of experience as a QA/QC Engineer or equivalent.</li> <li>Must have experience in inspections of all stages of projects in oil & gas installations and construction QA/QC works.</li> <li>Must have experience in developing, updating and maintaining in-house technical standards and specifications.</li> <li>Fully conversant with NDE requirements and sour environments.</li> <li>Familiarity with ISO 9000 and 14000 series and international standards relevant to the oil and gas industry.</li> <li>Excellent written, coordination and verbal communication skills.</li> </ul> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Veolia</strong>, a global leader in resource management, seeks a <strong>Control Room Operator</strong> for our <strong>Sulaibiya Waste Water Treatment &amp; Reclamation Plant</strong> in Kuwait.</p><br><p>We specialize in innovative wastewater treatment and reclamation solutions, guided by our values of Responsibility, Solidarity, Respect, Innovation, and Customer Focus.</p><br><p>With a global workforce of 179,000, we're committed to sustainable development and optimizing resources. Join our team at this cutting-edge facility to contribute to environmental sustainability and water management in Kuwait.</p><br><p>At Veolia, you'll work on impactful projects, enjoy growth opportunities, and be part of our mission to lead the ecological transformation in wastewater treatment and reclamation.</p><br><br>Job Description<br><p><strong>Role</strong></p><br><p>Control Room Operator is responsible for the safe and smooth operation of UF/RO reclamation plant, will be part of operation team and will work on shift duty along with process leader. Responsibilities include – but not limited to - monitoring UF/RO system &amp; plant utilities, O&amp;M procedures and activities, evaluating treatment process/plant conditions, report operation conditions and findings, and making process control decisions in coordination with process leader. Control room operator shall work closely and coordinate with process leader, Operation manager and other maintenance discipline supervisors to ensure smooth and effective operation of reclamation plant and to sustain overall plant performance.</p><br><p><strong>RESPONSIBILITIES:</strong></p><br><p>The Control Room Operator shall perform the following and any other tasks as per work requirements:</p><br><ul><li>The position will be functionally reporting to Field Service Lead and one over one to Operation manager.</li><li>Reviews process control operation through inspection of system and plant records, technical data, operating reports and historical trends.</li><li>Investigates, diagnoses, report, and recommends correction of abnormalities occurring in any part of the</li><li>UF/RO plant system or Process or plant utilities to ensure safe operation of the plant as per the stated procedures.</li><li>Shares and escalate the operational observations pertaining to the UF/RO plant process or system control operation to ensure the economical functioning of plant facilities, coordinating operational strategies with Field Service Lead or Manager.</li><li>Responsible for reporting shift operational activities to Field Service Lead and operation manager.</li><li>Responsible for creating safe working area by isolating the equipment/system from potential hazardous source and to authorize work executor to start the work by applying LOTO devices, the execution of the work shall be followed until the completion of the job.</li><li>Responsible for measuring individual UF skid turbidity and RO individual vessel conductivity and maintains records for future reference and control.</li><li>Regular updates to Field Service Lead and Manager and make routine plants walk round to notice any plant anomalies before in time. Responsible for reporting the shift activities to concern discipline responsible for corrective actions.</li><li>Routine monitoring of static and rotary equipment and initiate necessary maintenance works to avoid equipment malfunctioning &amp; damages.</li><li>To work closely with client control room operators to maintain good relationship while on executing the assigned or common tasks.</li><li>Execute assigned tasks efficiently as per the instruction given based on plant process requirement and update the status periodically.</li><li>Responsible for communicate with other discipline responsible on equipment isolation and to initiate the maintenance works, follow up the works until the completion of works.</li><li>Writes comprehensive reports on process control operations as necessary to provide information as may be required by management.</li><li>Demonstrates continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality service.</li><li>Plan and initiate chemical preparation and perform lab analysis deemed necessary for the plant smooth operation and work closely with chemical department on timely and safe completion of chemical preparation,&nbsp;loading &amp; unloading of chemicals.</li><li>Reviews all chemical usage to determine correct chemicals, doses, and application points; carry out necessary tasks related to chemical and water analysis based on process requirement.</li><li>Monitoring of process parameters, online instruments and individual system performances through plant automation system and initiate necessary action.</li><li>Assist Field Service Lead on investigating &amp; troubleshooting the process disturbances, equipment malfunctioning and notify the concern department responsible in time for necessary actions.</li><li>Write shift activities clearly and organized manner in shift log book and the shift activities shall distinctly communicated to shift reliever for further follow-up.</li><li>Responsible for maintaining daily activity log like CIP activity log, Refill chemical log, daily analysis log, etc..</li><li>Apply and follow plant EHS procedures including handling of hazardous chemicals, confined space activities, chemical spill control, LOTO procedure and evacuation &amp; emergency procedures.</li><li>Optimize and assist with the development of operational quality system procedures/guidelines/documents for&nbsp;Water Treatment.</li><li>Ensures to adheres to EHS &amp; Quality processes and procedures, Checks job sites for potential hazards and reports when things against company policies.</li><li>Maintains appropriate housekeeping for plant facilities cooperating with other departments.</li><li>Ability to work independently most of the time, but report to his supervisors.</li><li>Determine the reasons for any malfunctions of systems or components to solve the problem.</li></ul><br>Qualifications<br><p><strong>Q</strong><strong>U</strong><strong>A</strong><strong>LIFICATION &amp; REQUIREMENTS:</strong></p><br><ul><li>Bachelor’s degree in Chemistry or equivalent. Other combinations of experience and education that meet the&nbsp;minimum requirements will be considered</li><li>Work experience of minimum 3-5 years in Waste Water Treatment and Reclamation plant</li><li>Proven experience in UF and RO membrane technology</li><li>Experience in plant automation system like DCS, SCADA and PLC is essential</li><li>Knowledge on plant safety and EHS</li><li>Good communication skills in English. Arabic knowledge advantageous.</li></ul><br>Additional Information<br><p><strong>DESIRED CHARESTERICTS</strong></p><br><ul><li>Ability to work per priority, dealing with complexity and result driven</li><li>Experience in working with small group of team members</li><li>Work experience in any large Water treatment plant process, Chemical, O&amp;G plants or Power plants.</li><li>Shall possess excellent interpersonal skills and shall be a good team player</li></ul><p><strong>As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.</strong></p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Construction Manager provides on-site administrative, technical management, and leadership for the design and contract compliance, and construction of large multi-million-dollar Government funded construction project at a specified project site. Principal Accountabilities (Typical duties include the following, although specific duties vary by assignment or contract.) • Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule. • Ensures construction adheres to construction specifications. • Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc. Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required. • Logs, references, distributes, and files all related correspondence, drawings, and documents. • Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned). • Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and SOPs for security, safety, environmental controls, hazardous materials and underground utilities. • Visits construction sites and submits required construction reports to monitor progress against schedule/timelines. • Cooperates with visiting Government and DI personnel conducting official inspection visits and surveys and participate in their briefing or orientation. • Provides leadership, mentoring, and professional development to assigned staff. • Manages the work of teams to procure and construct work. • Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion. • Attends meetings as required including design and construction reviews and construction kickoff meetings. • Performs other qualified duties as assigned. Knowledge &amp; Skills • Knowledge of cost controls, contractual and project management of international construction projects. • Shall also be versed in the International Building Code, NFPA Fire Codes and the NEC in addition to general construction practices. • Knowledge of construction materials, processes, techniques, and methods. • Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations. • Knowledge of Service Contract Act and Truth in Negotiations Act. • Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract. • Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA). • Knowledge of accounting practices including DynCorp s disclosed accounting practices. • Effective leadership and interpersonal skills. • Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps forward operating bases, and major civil projects. • Excellent communication and organizational skills are essential. • Able to use Project and Construction Management planning and reporting tools such as Microsoft Project and Primavera. Experience &amp; Education • HS diploma or equivalent • Bachelor s degree in engineering, construction technology, or construction management (preferred). • Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance. • Minimum seven (7) years of construction field experience in all phases of Civil and Building Construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience. • Experience with mechanical projects (HVAC, plumbing) and electrical projects. • Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification. • Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices. • Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities. • An EIT or Professional Certification/Project Management Certification is desired. • Additional knowledge/skills may be required by contract or assignment. Physical Requirements/Working Environment • Works in a normal office environment with controlled temperature and lighting conditions. • May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>HS diploma or equivalent</li><li>Bachelor s degree in engineering, construction technology, or construction management (preferred).</li><li>Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance.</li><li>Minimum seven (7) years of construction field experience in all phases of Civil and Building Construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience.</li><li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li><li>Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li><li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices.</li><li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li><li>An EIT or Professional Certification/Project Management Certification is desired.</li><li>Additional knowledge/skills may be required by contract or assignment.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>1. JOB DETAILS</p><br><p>Direct Report Project HSE Manager</p><br><p>Operational Scope Civil Works | Drilling &amp; Completions | Work Over | Facilities | Production</p><br><p>Supervises Mechanical Lifting contractors; Drilling Rig Lifting Crews; any Contractor performing Mechanical Lifting activities under SLB operational control; site level DROPS auditors and HSE Specialists in their execution of the DROPS Program</p><br><p>2. ROLE PURPOSE</p><br><p>The Mechanical Lifting &amp; DROPS Subject Matter Expert Lead is the SLB Mutriba Project authority for the safe design, planning, execution, and continuous improvement of Mechanical Lifting and Dropped Objects Prevention (DROPS) activities across the Mutriba Field Development Project. The role combines planning and operational SME oversight of lifting operations with assurance of the Project's DROPS system implementation, ensuring full compliance with SLB standards, client requirements, and applicable regulatory frameworks across all project phases and contractor interfaces.</p><br><p>3. KEY RESPONSIBILITIES</p><br><p>Mechanical Lifting SME</p><br><p>→ Lead the planning, preparation, implementation, monitoring, and review of Mechanical Lifting Plans (MLPs) for all project phases, including all prevention and mitigation measures.</p><br><p>→ Review and validate all critical lifting plans prepared by SLB and Contractors, categorize lifts in accordance with the Lift Categorization Questionnaire, and submit Critical and Non-Routine lifts to the right channels.</p><br><p>→ Personally supervise the execution of Non-Routine, Critical, and Complex lifts across all project locations, such as Rig Mobilization, Initial Rig Moves, Skidding operations and de-mobilization.</p><br><p>→ Ensure all lifting risk assessments (HARC/JSA) are prepared, reviewed, and adequate prior to the commencement of any lifting operation.</p><br><p>→ Assess Pre-Job Safety Meetings (PJSMs) related to mechanical lifting operations and verify that controls identified in the MLP and HARC are communicated and understood by all participants.</p><br><p>→ Advise and stop lifting operations during adverse weather conditions (lightning, high-wind events) and verifysuspension and resumption criteria are clearly defined and enforced at site level.</p><br><p>→ Establish, maintain, and audit all Project Lifting Equipment Registers across all rig sites and call-out services, ensuring all lifting appliances and accessories are inspected, certified, color-coded, and fit for purpose.</p><br><p>→ Verify that third-party lifting equipment introduced to SLB managed sites holds valid certification from an LEEAaccredited or equivalent body, aligned with applicable standards.</p><br><p>→ Ensure adequate storage and in-service maintenance of all lifting gear and accessories in accordance with</p><br><p>Project and client's requirements.</p><br><p>→ Drive compliance with SLB's Mechanical Lifting Standard (SLB-HSE-S013) and Mechanical Lifting B.O.O.K. (SLB-HSE-M013) across all contractor interfaces.</p><br><p>→ Conduct frequent, structured audits of all ML activities and equipment at rig sites and call-out service locations, documenting findings and tracking corrective actions closure.</p><br><p>→ Perform ML related assessments for the Annual Audit and Inspection Plan (AAIP) to verify ongoing compliance with SLB standards, client procedures, and regulatory requirements.</p><br><p>→ Report all lifting-related events in QUEST (SLB incident management system) in a timely manner, ensuring accuracy of classification, causal analysis, and corrective/preventive action assignment.</p><br><p>→ Lead or actively participate in investigations of any incident, near miss, or high-potential event related to mechanical lifting operations.</p><br><p>→ Coach, assess, and verify the competence of personnel involved in ML operations such as Lifting Supervisors, Crane Operators, Banksmen, and Riggers, against defined competency frameworks.</p><br><p>→ Maintain competency assessment records and ensure training validity periods are tracked and renewed.</p><br><p>→ Deliver or coordinate delivery of ML awareness and technical training as required by project needs.</p><br><p>→ Serve as primary interface with customer's Lifting Authority for ML plans, approvals, and regulatory compliance.</p><br><p>DROPS Authority</p><br><p>→ Project-level DROPS Program Assurance Lead for integrity, consistency, and effectiveness of the DROPS prevention program across all Mutriba Project locations.</p><br><p>→ Review, evaluate, and formally validate DROPS Inspection Reports submitted by rig sites and service locations, verifying accuracy on findings, classification, and effectiveness and closure of corrective actions.</p><br><p>→ Validate the correct implementation of DROPS, including DROPS Zone identification, zoning maps, barrier deployment, DROPS Picture Books, tethered tool program, and related.</p><br><p>→ Conduct structured DROPS Program audits across all active project phases and locations, assessing compliance with SLB-HSE-S023 (DROPS Standard) and the DROPS B.O.O.K. (SLB-HSE-M023).</p><br><p>→ Verify DROPS inspection checklists for rig-ups, and the maintenance of DROPS Inspection Schedules.</p><br><p>→ Support site-level HSE Supervisors in identifying dropped object and Work at Height hazards.</p><br><p>→ Ensure DROPS incidents are reported, classified, and investigated in accordance with project and SLBrequirements, and lessons-learned dissemination across the project.</p><br><p>→ Maintain and monitor DROPS program performance metrics; escalate systemic non-conformances.</p><br><p>Additional Responsibilities</p><br><p>→ Participate in Project HAZOP/HARC processes as the ML and DROPS SME for ML scenarios under review.</p><br><p>→ Support development and review of project HSE Plans, procedures, and standards related to ML and DROPS.</p><br><p>→ Contribute to pre-mobilization readiness reviews as the ML/DROPS technical authority.</p><br><p>→ Support emergency response planning for lifting-related scenarios (crane collapse, load drop, manriding rescue) and verify that adequate rescue plans are in place.</p><br><p>→ Assist developing the Annual Audit and Inspection Plan (AAIP) for ML and DROPS activities.</p><br><p>4. AUTHORITY</p><br><p>→ Authority to Stop Work on any mechanical lifting or related activity that does not comply with approved lift plans,SLB standards, or client requirements.</p><br><p>→ Authority to reject and require re-submission of non-compliant lift plan with SLB or client requirements.</p><br><p>→ Authority to require the removal of lifting equipment or accessory found defective, uncertified, or non-compliant.</p><br><p>→ Authority to withhold validation for any site or location non-compliant with DROPS system requirements.</p><br><p>→ Authority to escalate non-conformances to Contractor and Project Management<br></p><br><p><strong> Education</strong>: Bachelor's degree in engineering or Technical Career</p><br><p><strong>Professional Certification:</strong></p><br><p>* LEEA Appointed Person for Lifting Operations or similar.</p><br><p>* Third-party certification credited by LEEA or NSL.</p><br><p>* DROPS Level 3 - Focal Point.</p><br><p><strong>Experience</strong>:</p><br><p>* Minimum 10 years of experience in a dedicated Mechanical Lifting supervisory or SME capacity, preferably onthe Oil &amp; Gas Industry.</p><br><p>* Demonstrated experience operating in multi-contractor onshore drilling environments, including direct supervisionof crane, rigging, and lifting appliance crews.</p><br><p>* Prior experience conducting DROPS program audits and managing DROPS systems at rig or field level</p><br><p><strong>Language</strong>: Fluent English mandatory. Arabic is an advantage.<br></p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><u>Type of Requisition:</u></b></p><br>Regular<p><u><b>Clearance Level Must Currently Possess:</b></u></p><br>Secret<p><u><span><span><span><span><span><b>Clearance Level Must Be Able to Obtain:</b></span></span></span></span></span></u></p><br>Secret<p><b><u>Public Trust/Other Required:</u></b></p><br>None<p><u><b>Job Family:</b></u></p><br>Logistics<p><b><u>Job Qualifications:</u></b></p><br><p><b>Skills:</b></p><br>Inventory Management, Long Term Planning, Theatres (Inactive)<p><b>Certifications:</b></p><br>None<p><b>Experience:</b></p><br>5 + years of related experience<p><b>US Citizenship Required:</b></p><br>Yes<p><u><b>Job Description:</b></u></p><br><p>Ammunition Manager Assistant<br>Seize your opportunity to make a personal impact as an Ammunition Manager Assistant supporting the Customer. GDIT is your place to make meaningful contributions to challenging projects and grow a rewarding career.<br>At GDIT, people are our differentiators. As an Ammunition Manager Assistant you will help ensure today is safe and tomorrow is smarter. Our work depends on an Ammunition Manager Assistant joining our team to support the Customer's equipment operations and missions.<br>HOW AN AMMUNITION MANAGER ASSISTANT WILL MAKE AN IMPACT<br>● Assist U.S. Government regarding supply, inventory, and stockpile management for all U.S. Army ammunition stocks in USCENTCOM to include storage levels, establishing and setting theater stockage objectives, training ammunition supply support, central requisitioning, force modernization, asset stratification, asset movement, disposition, re-distribution, retrograde, call forward, foreign military sales, maintenance, demilitarization, and disposal instructions<br>● Provide management and asset visibility, through the use of all specified ammunition management automation sites and systems to include but not limited to, Standard Army Ammunition System (SAAS), Total Ammunition Management Information System (TAMIS), Munitions History Program (MHP), National Level Ammunition Capability (NLAC).</p><br><p>● Identify shortages and recommend resupply actions, monitor on hand stocks for theater war reserves, operational and training ammunition, and keep accountability and visibility of all munitions within US CENTCOM</p><br><p>● Track the shipments of ammunition by air, ground, and by sea vessel within the theater. Provide Microsoft Excel spreadsheets, and Microsoft PowerPoint slides that show ammunition stock levels. Perform as a troubleshooter for issues involving Class V schedule shipments by air, ground, and sea vessel within theater. Provide analysis of ammunition pallet shortages by destination</p><br><p>● Receive, evaluate, and approve/disapprove Ammunition Basic Load (ABL) requests after analyzing the unit’s authorizations. Track ABL request status and provide up to date status.</p><br><p>● Serve as subject matter expert in ammunition operations and contingency planning.</p><br><p>WHAT YOU’LL NEED TO SUCCEED:<br>● Five years of Theater/Operational level Conventional Ammunition Management experience, to include the distribution and accountability of ammunitions.</p><br><p>● Ten years of technical experience with ammunition management and theater distribution.</p><br><p>● Proficient in Standard Army Ammunition System (SAAS) Operations, procedures, and practices, to include maintenance of SAAS connectivity, processing of Daily Cycles and Reports, support of normal inventory operations, and proper accountability of stocks.</p><br><p>● Ability to interpret and apply rules, regulations, policies and procedures.</p><br><p>● High level of attention to detail due to the sensitivity of the information.</p><br><p>● Must be organized, accurate, thorough, and able to monitor work for quality.</p><br><p>● Knowledge of Microsoft Office, or any other system required to perform assigned duties.</p><br><p>● Knowledge on the Total Ammunition Management Information System and Munitions History Program (MHP), National Level Ammunition Capability (NLAC), and understanding of the associated programming, funding, manufacturing, distribution and storage systems to project, monitor and resolve problems with ammunition resources.</p><br><p>● Communicates intent through clear, concise, and confident guidance via phone, email, or in person.</p><br><p>● Must be able to meet CENTCOM/CRC medical and deployment requirements for OCONUS.</p><br><p>● US Passport with at least two years remaining</p><br><p>● Obtain and Maintain Kuwait Work Visa</p><br><p>● Must have a current DoD SECRET.</p><br><p>● Location: On Customer Site**<br>GDIT IS YOUR PLACE:<br>● 401K with company match<br>● Internal mobility team dedicated to helping you own your career<br>● Professional growth opportunities including paid education and certifications<br>● Cutting-edge technology you can learn from</p><br><p>#DefenseOCONUS</p><br><p>#GDITpriority</p><br><p>#GDITArmy</p><br>The likely salary range for this position is $61,402 - $74,750. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Total compensation for international positions varies by tax, social security, and immigration statuses, as well as location. Generally, an international assignment may include allowances, premium uplifts, and/or relocation or transportation benefits, above base salary range noted.<p><u><b>Scheduled Weekly Hours:</b></u></p><br>40<p><b><u>Travel Required:</u></b></p><br>Less than 10%<p><b><u><span><span>T</span>elecommuting Options:</span></u></b></p><br>Onsite<p><u><b>Work Location:</b></u></p><br>KWT Kuwait City - Camp Arifjan (APC150)<p><u><b>Additional Work Locations:</b></u></p><br><p><b><u>Total Rewards at GDIT:</u></b></p><br>Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.<p><b><u>Our Identity Verification Process:</u></b></p><br>As part of the hiring process, we will ask you to complete an identity verification process that leverages advanced biometrics and artificial intelligence to ensure authenticity and protect against identity fraud. You are expected to be on camera during virtual interviews. We reserve the right to take your picture to verify your identity and prevent fraud. By proceeding, you authorize the collection, processing, and use of your biometric data for identity verification and security purposes.<p><b><u>About Our Work:</u></b></p><br>We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 26,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.Join our Talent Community to stay up to date on our career opportunities and events at<p>gdit.com/tc.</p><br>Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: • Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. • Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. • Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins. • Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. • Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions • Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components • Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. • Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data • Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. • Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control • Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. • Performs applicable “O” and “I” level battery maintenance functions as required per applicable maintenance manuals. • Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR • Performs scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment (life rafts, first aid kits, etc..), pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated aviation life support equipment, airframes, and power plants systems. • Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. • Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ • Conducts off station maintenance when required. • When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: - High School Diploma - Must be able to obtain/maintain the following required certifications/qualifications: - Aviation Gas Free Engineering (AVGFE) certification - Auxiliary Power Unit (APU) run qualification -“I” Level Battery Maintenance certification - Applicable Support Equipment licensing - Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification - Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification - Corrosion Prevention and Control qualification - Confined Space Entry certification Experience: • Four years’ maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred.. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: • Must be United States (U.S.) citizen, be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must be able to obtain and maintain at a Secret Security Clearance. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to: The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” and “I” level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed. • Must have an in-depth knowledge of aircraft technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the C-130J maintenance department. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>