وظائف فني نحاس - محافظة العاصمة (الكويت) الكويت

<p>The Data Center Electrical Engineer is responsible for the engineering-level ownership, reliability, safety, and performance of the data center electrical power infrastructure, from the utility intake through to the rack level. The role manages electrical maintenance strategy, switching procedures, electrical safety programs, vendor activities, spare parts planning, and system performance. The Electrical Engineer also directs the electrical manning technicians, authorizes and leads critical switching operations, and acts as the electrical authority during incidents and escalations.</p><p>Key Responsibilities</p><ul><li>Take engineering ownership of the data center electrical infrastructure, including MV/LV distribution systems, HV/MV switchgear, GIS/AIS, transformers, RMUs, UPS systems, STS/ATS systems, generators, fuel systems, batteries, and protection systems.</li><li>Develop, maintain, and control electrical switching procedures.</li><li>Authorize, lead, and supervise HV/MV and critical LV switching operations.</li><li>Manage the arc flash and electrical safety program for the data center.</li><li>Ensure full compliance with Lockout/Tagout, LOTO, Permit to Work, PTW, and electrical isolation requirements.</li><li>Develop and manage the annual electrical Planned Preventive Maintenance, PPM, program in line with OEM recommendations.</li><li>Coordinate generator load-bank testing and generator readiness programs in accordance with NFPA 110.</li><li>Prepare, review, and maintain electrical Standard Operating Procedures, SOPs, Methods of Procedure, MOPs, and Emergency Operating Procedures, EOPs.</li><li>Review and approve the safe execution of electrical procedures and maintenance activities.</li><li>Coordinate electrical maintenance vendors and supervise OEM major services, testing, repairs, and equipment overhauls.</li><li>Develop and maintain the spare-parts and critical-inventory plan for electrical systems.</li><li>Analyze electrical system performance, protection settings, load profiles, power usage, and equipment capacity.</li><li>Identify and implement opportunities for energy optimization and improved electrical system performance.</li><li>Lead root cause analysis for electrical faults, failures, alarms, and service interruptions.</li><li>Develop and follow up corrective and preventive actions arising from electrical incidents.</li><li>Direct, support, develop, and train the electrical manning technicians.</li><li>Support integrated systems testing, testing and commissioning, and electrical system readiness activities.</li><li>Support predictive maintenance programs, including thermography, transformer oil sampling, and condition monitoring.</li><li>Act as the electrical technical authority during incidents, emergencies, and operational escalations.</li><li>Provide 24/7 on-call support and shift coverage assistance when required.</li></ul><p>Minimum Qualifications</p><ul><li>Bachelor s degree in Electrical Engineering.</li><li>Minimum of five years of experience in electrical operations and maintenance involving MV/LV electrical systems.</li><li>At least two years of experience in a data center, critical facility, industrial facility, or similarly high-availability environment.</li><li>Practical experience with HV/MV switching and critical LV switching operations.</li><li>Working knowledge of electrical protection systems, switching procedures, isolation practices, and electrical safety requirements.</li><li>Working knowledge of generator control systems such as DeepSea, ComAp, or Woodward.</li><li>Familiarity with NFPA 110 and applicable NEC references.</li><li>Demonstrated experience in electrical maintenance planning, technical procedure writing, and vendor management.</li><li>Strong technical reporting and documentation skills.</li><li>Fluency in written and spoken English.</li></ul><p>Preferred Qualifications and Certifications</p><ul><li>HV/MV switching authorization or license issued or recognized by the relevant GCC regulatory authority.</li><li>OEM training or certification related to UPS and critical-power systems from Schneider Electric, Eaton, Vertiv, ABB, or an equivalent manufacturer.</li><li>OEM training or certification related to MV/LV switchgear and protection systems from Schneider Electric, ABB, Siemens, Eaton, or an equivalent manufacturer.</li><li>OEM training or certification related to generators from Caterpillar, Cummins, MTU, Rolls-Royce, Kohler, SDMO, or an equivalent manufacturer.</li><li>OEM training or certification related to STS, ATS, and power-distribution systems from Vertiv, ABB, Eaton, Socomec, or an equivalent manufacturer.</li></ul><p>Other Requirements</p><ul><li>Willingness to work in a critical data center environment.</li><li>Availability for 24/7 on-call support.</li><li>Ability to support shift coverage, planned maintenance, emergency response, and critical switching activities.</li><li>Ability to coordinate with operations, facilities, safety, vendors, and OEM service teams.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Electrical Engineering.</li><li>Minimum of five years of experience in electrical operations and maintenance involving MV/LV electrical systems.</li><li>At least two years of experience in a data center, critical facility, industrial facility, or similarly high-availability environment.</li><li>Practical experience with HV/MV switching and critical LV switching operations.</li><li>Working knowledge of electrical protection systems, switching procedures, isolation practices, and electrical safety requirements.</li><li>Working knowledge of generator control systems such as DeepSea, ComAp, or Woodward.</li><li>Familiarity with NFPA 110 and applicable NEC references.</li><li>Demonstrated experience in electrical maintenance planning, technical procedure writing, and vendor management.</li><li>Strong technical reporting and documentation skills.</li><li>Fluency in written and spoken English.</li><li>HV/MV switching authorization or license issued or recognized by the relevant GCC regulatory authority.</li><li>OEM training or certification related to UPS and critical-power systems from Schneider Electric, Eaton, Vertiv, ABB, or an equivalent manufacturer.</li><li>OEM training or certification related to MV/MV switchgear and protection systems from Schneider Electric, ABB, Siemens, Eaton, or an equivalent manufacturer.</li><li>OEM training or certification related to generators from Caterpillar, Cummins, MTU, Rolls-Royce, Kohler, SDMO, or an equivalent manufacturer.</li><li>OEM training or certification related to STS, ATS, and power-distribution systems from Vertiv, ABB, Eaton, Socomec, or an equivalent manufacturer.</li><li>Willingness to work in a critical data center environment.</li><li>Availability for 24/7 on-call support.</li><li>Ability to support shift coverage, planned maintenance, emergency response, and critical switching activities.</li><li>Ability to coordinate with operations, facilities, safety, vendors, and OEM service teams.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Role Purpose</b></p><p><br></p><p>The Business Applications Engineer will build, deploy, and support KDF's business applications on the Microsoft Power Platform and Microsoft 365. The role covers the full application lifecycle — requirements, design, development, testing, deployment, support, and controlled enhancement — turning operational and field requirements into practical, secure, and maintainable digital solutions.</p><p><br></p><p>The position works directly with business departments across Operations, HSE, Supply Chain, Finance, and HR to understand their processes and deliver working applications, automations, and reports. KDF operates Microsoft Dynamics 365, and the role provides day-to-day technical support to that environment alongside Power Platform delivery. The postholder builds within the platform standards, environment structure, and governance policies set by the Technology &amp; Digitalization Transformation function, and is accountable for the quality, documentation, and ongoing supportability of the solutions they deliver.</p><p><br></p><p><b>Key Roles and Responsibilities</b></p><p><br></p><ul><li>Work with business departments to gather, analyze, and document requirements, process flows, and acceptance criteria.</li><li>Design and build applications using Microsoft Power Apps, covering both canvas and model-driven approaches.</li><li>Build mobile-capable applications supporting field operations, including inspections, asset registration, checklists, and equipment tracking, with offline-tolerant use cases where required.</li><li>Design and maintain Dataverse solutions, including tables, relationships, business rules, security roles, and solution-aware development.</li><li>Develop and maintain automated business processes using Power Automate, including approvals, exception handling, and monitoring of live flows.</li><li>Build and support SharePoint Online solutions, including lists and libraries, content types, metadata, permissions, and integrated forms.</li><li>Develop Power BI reports and dashboards to support business reporting requirements.</li><li>Provide day-to-day technical support for the Microsoft Dynamics 365 environment, including configuration of forms, views, fields, business process flows, and role-based access against approved requirements.</li><li>Deliver integrations between Power Platform solutions and internal or third-party business systems using REST APIs and JSON.</li><li>Perform testing and support business users through user acceptance testing prior to release.</li><li>Deploy solutions across Development, Test/UAT, and Production environments using managed solutions and the established release procedure.</li><li>Provide ongoing support for applications after go-live, including incident resolution, defect fixes, access changes, performance issues, enhancements, and releases.</li><li>Maintain the enhancement backlog and agree priorities with business stakeholders.</li><li>Work within the organization's Data Loss Prevention policies, environment separation, role-based access control, and secure credential-handling standards, with no secrets embedded in solutions.</li><li>Follow change-control discipline for every release, including peer review, approval, testing evidence, rollback plans, and updated documentation.</li><li>Ensure applications and flows are owned by the business and the function rather than by an individual employee account.</li><li>Produce and maintain technical documentation, including data models, process flows, deployment steps, support runbooks, and user guides.</li><li>Deliver user training and handover material to business users and support staff.</li><li>Identify recurring inefficiencies in business processes and propose practical automation opportunities.</li><li>Escalate architecture decisions, security policy exceptions, and platform-level changes to the Digital Solutions Manager for approval.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Desired Skills and Qualifications</b></p><p><br></p><ul><li>Bachelor's degree in Computer Science, Information Technology, Software Engineering, Computer Engineering, or Information Systems.</li><li>2–5 years of hands-on experience building business applications on the Microsoft Power Platform or a comparable enterprise low-code platform.</li><li>Demonstrable delivery of production applications taken from requirements through to live use and ongoing support.</li><li>Hands-on experience with Microsoft Power Apps, including canvas applications and exposure to model-driven applications.</li><li>Practical experience with Microsoft Dataverse, including tables, relationships, business rules, and security roles.</li><li>Working experience with Power Automate, including approvals, exception handling, and troubleshooting live flows.</li><li>Experience with SharePoint Online, including lists and libraries, permissions, and integrated forms.</li><li>Power BI report development, including data preparation and basic DAX.</li><li>Experience delivering at least one integration using REST APIs, JSON, or a third-party business system.</li><li>Working knowledge of SQL and relational data modelling.</li><li>Experience supporting applications after go-live, including incidents, defects, access changes, and enhancements.</li><li>Experience working directly with business users to gather requirements and demonstrate solutions.</li><li>Ability to produce clear technical documentation and end-user guidance.</li><li>Strong analytical, problem-solving, communication, and stakeholder-engagement skills, with the ability to translate business requirements into practical solutions.</li><li>Exposure to Microsoft Dynamics 365 configuration is advantageous. Candidates without prior Dynamics 365 experience will be supported in developing it, as the role grows into this area.</li><li>Exposure to Microsoft Graph, Azure Functions, Logic Apps, or custom connectors is advantageous.</li><li>Exposure to application lifecycle management, managed solution deployment, Copilot Studio, or AI Builder is advantageous.</li><li>Awareness of DLP policies, security reviews, and change-management controls is advantageous.</li><li>Experience within the oil and gas, industrial, manufacturing, or field-operations sectors is preferred.</li></ul><p><br></p><p><b>Preferred Certifications</b></p><p><br></p><ul><li>PL-900: Microsoft Certified: Power Platform Fundamentals</li><li>PL-200: Microsoft Certified: Power Platform Functional Consultant Associate</li><li>PL-400: Microsoft Certified: Power Platform Developer Associate</li><li>PL-300: Microsoft Certified: Power BI Data Analyst Associate</li></ul><p><br></p></div>

<p><h4>Principal accountabilities</h4> <p>Typical duties include the following, although specific duties vary by assignment or contract.</p> <ul> <li>Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule.</li> <li>Ensures construction adheres to construction specifications.</li> <li>Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc.). Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required.</li> <li>Logs, references, distributes, and files all related correspondence, drawings, and documents.</li> <li>Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned).</li> <li>Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and standard operating procedures for security, safety, environmental controls, hazardous materials and underground utilities.</li> <li>Visits construction sites and submits required construction reports to monitor progress against schedule and timelines.</li> <li>Cooperates with visiting government and department of defense personnel conducting official inspection visits and surveys and participates in their briefing or orientation.</li> <li>Provides leadership, mentoring, and professional development to assigned staff.</li> <li>Manages the work of teams to procure and construct work.</li> <li>Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion.</li> <li>Attends meetings as required including design and construction reviews and construction kickoff meetings.</li> <li>Performs other qualified duties as assigned.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of cost controls, contractual and project management of international construction projects.</li> <li>Shall also be versed in the International Building Code, NFPA fire codes and the NEC in addition to general construction practices.</li> <li>Knowledge of construction materials, processes, techniques, and methods.</li> <li>Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations.</li> <li>Knowledge of Service Contract Act and Truth in Negotiations Act.</li> <li>Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract.</li> <li>Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA).</li> <li>Knowledge of accounting practices including disclosed accounting practices.</li> <li>Effective leadership and interpersonal skills.</li> <li>Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps, forward operating bases, and major civil projects.</li> <li>Excellent communication and organizational skills are essential.</li> <li>Able to use project and construction management planning and reporting tools such as Microsoft Project and Primavera.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or equivalent.</li> <li>Bachelor’s degree in engineering, construction technology, or construction management (preferred).</li> <li>Must be able to obtain and maintain a secret clearance; note US citizenship is required to obtain a secret clearance.</li> <li>Minimum seven years of construction field experience in all phases of civil and building construction or a two-year associate degree in construction management or related field and five years of field experience.</li> <li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li> <li>Experience in civil and structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li> <li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA fire codes, British Standard (BS) electrical code, and the National Electric Code (NEC) in addition to general construction practices.</li> <li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time and cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li> <li>An Engineer in Training (EIT) or professional certification/project management certification is desired.</li> <li>Additional knowledge and skills may be required by contract or assignment.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Works in a normal office environment with controlled temperature and lighting conditions.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - The company enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his or her quality management and customer satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to the job.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>Typical duties include the following, although specific duties vary by assignment or contract.</p> <ul> <li>Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule.</li> <li>Ensures construction adheres to construction specifications.</li> <li>Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc.). Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required.</li> <li>Logs, references, distributes, and files all related correspondence, drawings, and documents.</li> <li>Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned).</li> <li>Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and SOPs for security, safety, environmental controls, hazardous materials and underground utilities.</li> <li>Visits construction sites and submits required construction reports to monitor progress against schedule/timelines.</li> <li>Cooperates with visiting government and DI personnel conducting official inspection visits and surveys and participates in their briefing or orientation.</li> <li>Provides leadership, mentoring, and professional development to assigned staff.</li> <li>Manages the work of teams to procure and construct work.</li> <li>Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion.</li> <li>Attends meetings as required including design and construction reviews and construction kickoff meetings.</li> <li>Performs other qualified duties as assigned.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of cost controls, contractual and project management of international construction projects.</li> <li>Shall also be versed in the International Building Code, NFPA Fire Codes and the NEC in addition to general construction practices.</li> <li>Knowledge of construction materials, processes, techniques, and methods.</li> <li>Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations.</li> <li>Knowledge of Service Contract Act and Truth in Negotiations Act.</li> <li>Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract.</li> <li>Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA).</li> <li>Knowledge of accounting practices including DynCorp’s disclosed accounting practices.</li> <li>Effective leadership and interpersonal skills.</li> <li>Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps forward operating bases, and major civil projects.</li> <li>Excellent communication and organizational skills are essential.</li> <li>Able to use project and construction management planning and reporting tools such as Microsoft Project and Primavera.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or equivalent.</li> <li>Bachelor’s degree in engineering, construction technology, or construction management (preferred).</li> <li>Must be able to obtain and maintain a Secret Clearance; note US citizenship is required to obtain a Secret Clearance.</li> <li>Minimum seven (7) years of construction field experience in all phases of civil and building construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience.</li> <li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li> <li>Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li> <li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices.</li> <li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li> <li>An EIT or professional certification/project management certification is desired.</li> <li>Additional knowledge/skills may be required by contract or assignment.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Works in a normal office environment with controlled temperature and lighting conditions.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p></p><p></p>

<strong>Overview</strong> <br> <br> <p> <strong>**This position will be physically located in Kuwait**</strong> </p> <p> </p> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <p> </p> <p>The Inventory Control &amp; BII Specialist is responsible for maintaining 100% physical accountability of all Basic Issue Items (BII) and Components of End Item (COEI) across APS-5 equipment sets. This position ensures vehicle gear layouts match the exact property book and authorized technical manual requirements. The role also validates tactical digital communications systems, including SINCGARS/Harris radios, JCR, and BFT, and performs diagnostics using TMDE to isolate electronic node faults to the Line Replaceable Unit (LRU) level. The specialist ensures APS-5 equipment readiness, accuracy of component listings, and compliance with Army regulations and APS-5 SOPs.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong> <em> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span></em> </strong> </p> <ul> <li> <p>Perform full, partial, and cyclic inventories of BII, COEI, and AAL components for all APS-5 equipment. </p> </li> <li> <p>Responsible for 100% physical component count of all BII/COEI items.</p> </li> <li> <p>Ensure vehicle gear layouts match the exact authorized property book configuration and technical manual (TM) layout.</p> </li> <li> <p>Identify missing, damaged, incorrect, or substituted BII/COEI items and record all discrepancies.</p> </li> <li> <p>Maintain accurate inventory records within AWRDS, GCSS-Army, DPAS, and component tracking systems.</p> </li> <li> <p>Prepare shortage annexes, discrepancy worksheets, and reconciliation documentation.</p> </li> <li> <p>Ensure BII/COEI items are properly labeled, packaged, stored, and secured according to TMs and APS-5 SOPs. </p> </li> <li> <p>Support equipment issue, turn-in, and reset operations with complete BII/COEI validation. </p> </li> <li> <p>This position does not inspect engines, driveline systems, hydraulics, or vehicle mechanical readiness. </p> </li> <li> <p>Responsibilities focus solely on BII/COEI component accuracy, layout validation, and tactical digital systems.</p> </li> <li> <p>Validate vehicle-integrated tactical communications systems including SINCGARS/Harris radios, Joint Capabilities Release (JCR), and Blue Force Tracker (BFT).</p> </li> <li> <p>Perform functional checks on digital data buses, interface modules, and communication harnesses.</p> </li> <li> <p>Use TMDE to isolate faults in electronic nodes, data harnesses, and interface kits.</p> </li> <li> <p>Identify faults down to the Line Replaceable Unit (LRU) level.</p> </li> <li> <p>Ensure all tactical systems are installed/configured according to technical manuals and APS-5 configuration control standards.</p> </li> <li> <p>Maintain audit-ready logs of all diagnostics, validations, and corrective actions.</p> </li> <li> <p>Coordinate with Maintenance, Communication Shop, and Materiel Management for LRU replacements or system corrections.</p> </li> <li> <p>Maintain audit-ready documentation for inventories, tactical system checks, and reconciliation actions.</p> </li> <li> <p>Generate daily, weekly, and monthly inventory and tactical system status reports.</p> </li> <li> <p>Ensure compliance with APS-5 SOPs, Army regulations, and government contractual requirements.</p> </li> <li> <p>This job description is not intended to be all-inclusive. Management may assign additional duties to support APS-5 mission requirements.</p> <p> </p> </li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Minimum Qualifications: Education/Certifications</strong>: One year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>High school diploma or equivalent; associate degree preferred.</li> <li>Must be able to obtain a Host Country Driver's License</li> <li>Must be CAC eligible and/or the ability to obtain a CAC</li> </ul> </li> <li> <strong>Experience:</strong> <br> <ul> <li>APS-5 experience in inventory, BII/COEI management, or Army supply operations.</li> <li>Familiarity with SINCGARS/Harris/JCR/BFT systems and basic TMDE diagnostics.</li> <li>Proficiency with AWRDS, GCSS-Army, DPAS, and technical manual interpretation.</li> <li>Environmental Regulations, including Federal OSHA and EPA regulations.</li> <li>Military background and training beneficial.</li> </ul> </li> <li> <strong>Skills:</strong> <br> <ul> <li>Ability to instruct small and medium groups of people, Competent in computer operations to include Microsoft Office; Outlook, Word, Excel, and PowerPoint.</li> <li>Must have a strong ability to work independently.</li> <li>Strong analytical skills, attention to detail, and organizational abilities.</li> </ul> </li> <li> <strong>Working Conditions:</strong> <br> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <br> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> <p> </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Job Overview&nbsp;</strong></span></span></p><br><p><span><span>Weatherford is seeking a skilled and results-driven Field Specialist III – MPD to join our team. This pivotal role is responsible for optimizing MPD and drilling processes, enhancing efficiency, and driving profitability. The ideal candidate will work closely with country and regional team to ensure accurate reporting and compliance. Additionally, this role plays a key part in conducting Operations safely and with minimal interruption to drilling. The job requires occasional package preparation in the Weatherford base where full compliance to Weatherford performance standards is required.</span></span></p><br><p><span><span><strong>Responsibilities:</strong></span></span></p><br><ul><li><span><span>Conducts maintenance of the Managed Pressure Drilling Services equipment at the job site and workshop when required.</span></span></li><li><span><span>Responsible for daily MPD reporting, hydraulic calculations, simulations and supervises shift personnel.</span></span></li><li><span><span>At the discretion of product line management (such as the Engineering Manager, Operations Manager, or their designee) will be responsible for working in the shop. This will include but not limited to green tagging, preparing, and/or assisting with shipping equipment to job site.</span></span></li><li><span><span>Rig up, operate and perform troubleshooting of the Managed Pressure Drilling Services equipment at the job site or workshop, ensure all paperwork and HSE requirements are met and complied with</span></span></li><li><span><span>Perform green tagging, In Casing Test, or other operational activities required on location or in the shop and all documented procedures for the Managed Pressure Drilling Services equipment on location.</span></span></li><li><span><span>Perform all RCD operations and monitoring.</span></span></li><li><span><span>Performs field operations of Managed Pressure Drilling Services equipment including operating the MPD Choke from the Operator’s Panel</span></span></li><li><span><span>Troubleshoot all electrical/electronic components and repair/maintain chokes and other mechanical equipment as necessary.</span></span></li><li><span><span>Completes all the necessary reports/paperwork related to Managed Pressure Drilling Services operations.</span></span></li><li><span><span>Keeps updated on all inspection requirements for the Managed Pressure Drilling Services equipment on the job site and in the shop.</span></span></li><li><span><span>Demonstrate and apply knowledge and understanding of all matters related to the Managed Pressure Drilling Services equipment and accessories.</span></span></li><li><span><span>Provides onsite job support to include but not limited to: mechanical, hydraulic functionality, revision changes, compatibility issues, troubleshooting, system versions, of Managed Pressure Drilling Services components.</span></span></li><li><span><span>Keep updated on Managed Pressure Drilling Services equipment, mechanical and hydraulic equipment manufacturing or regulatory standards.</span></span></li><li><span><span>Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions</span></span></li><li><span><span>Comply with Weatherford and client Quality, Health, Security and Environment (QHSE) procedures and documentation on site for specific shift.</span></span></li><li><span><span>Document all jobs and incidents in the Weatherford Performance Tracking System (WPTS).</span></span></li><li><span><span>Participate in the Permit to Work process.</span></span></li><li><span><span>Actively participate in ToolBox talks.</span></span></li><li><span><span>Must understand and comply with all safety rules and company policies of Weatherford</span></span></li><li><span><span>Required to complete the competency and training requirements identified by Global and Regional Management.</span></span></li><li><span><span>Complete training in order to meet the minimum HSE certification and technical requirements required perform their jobs</span></span></li><li><span><span>Perform all duties regarding Managed Pressure Drilling Services and Weatherford assigned by management or supervisors within the physical demand of the job description.</span></span></li></ul><p><strong>Skills</strong></p><br><ul><li><span><span>Mechanical ability necessary to perform repairs&nbsp;</span></span></li><li><span><span>Excellent Microsoft Outlook, Word and Excel computer skills&nbsp;</span></span></li><li><span><span>Self-motivator, self-starter&nbsp;</span></span></li><li><span><span>Good oral and written communication skills&nbsp;</span></span></li><li><span><span>Must be able to follow instructions Able to work closely with fellow employees</span></span></li><li><span><span>Customer focused.</span></span></li><li><span><span>General understanding of products and their application.&nbsp;</span></span></li><li><span><span>Individual must be adaptive to change, have multi-tasking ability.&nbsp;</span></span></li><li><span><span>Ability to work in a team environment.&nbsp;</span></span></li><li><span><span>Ability to work in high and cold temperature environment&nbsp;</span></span></li><li><p><span><span>Should be able to work closely with all levels of personnel and outside contractors.</span></span></p><br><p><strong>Qualifications:</strong></p><br></li><li><span><span>3 - 5 years related to MPD field experience&nbsp;</span></span></li><li><span><span>Bachelor's degree</span></span></li><li><span><span>Strong MPD knowledge&nbsp;</span></span></li></ul><p><span><span>#LI-MD1</span></span></p><br><br> <p><span>Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation.&nbsp;&nbsp;</span></p><br> <p><span>We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition.&nbsp;&nbsp;</span></p><br> <p><span>Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team.&nbsp;&nbsp;</span></p><br> <p><span>When you join Weatherford, you instantly feel connected to something bigger – a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other’s successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford.&nbsp;</span></p><br> <p><b><span>Join Us:&nbsp;</span></b></p><br> <p><span>Weatherford is producing energy for today and tomorrow- with global opportunities as unlimited as your sense of adventure. Join us to make an impact on our customers, the industry, and the world.&nbsp;&nbsp;</span></p><br> <p><span>Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.</span></p><br> <br> <br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>ASAB ESS: Electrical Engineer (Secret Clearance)<br><br><p><b>Belong, Connect, Grow, with KBR! </b></p><br><br><br><p><b>KBR Government Solutions</b> delivers full life cycle professional and technical solutions that improve operational readiness and drive innovation. Our solutions help ensure mission success on land, air, sea, space and cyberspace for the Department of Defense, intelligence community, NASA and other federal agencies. KBR’s areas of expertise include engineering, logistics, operations, science, program management, mission IT and cybersecurity.</p><br><br><br><p>Our people make the world a more productive, efficient and fascinating place. And that's only the beginning.</p><br><br><br><p>The <b><i>Ali Al Salem Air Base </i></b>shall provide architectural and engineering services that support project, work order, and work request operations.&nbsp;</p><br><br><br><p>These functions are to ensure the delivery of&nbsp;BASE OPERATING SUPPORT-INSTALLATION (BOS-I) services to the 378 Air Expeditionary Wing (AEW), mission partners, and tenant units, including transient, temporary duty (TDY), permanent party, and rotational personnel.</p><br><br><br><p><b>RESPONSIBILITIES:</b></p><br><br><ul><li>Knowledge and Familiarity with War Reserve Material (WRM) assets</li><li>Efforts include planning for repair and maintenance, designing, providing technical support, and updating record drawings.</li><li>Provide effective Electrical Engineering support to ensure projects are designed and completed to support mission requirement based on guidance from 378 Engineering Flight Chief.</li><li>Develop and administer Activity/Asset Management Plans (AMP) that translates Air Force and installation objectives into asset-related decisions by understanding assets’ physical attributes, condition, usage, and performance as well as the realized and potential value to the mission. These plans should balance risk, current and future objectives, resource limitations, and lifecycle management.</li><li>As required, be available within two (2) hours of notification to meet on the installation with Government personnel.</li><li>Design and develop designs along with scope of work in support of various projects on PSAB.</li><li>Provide frequent updates to the 378 Engineering Flight Chief along with briefings upcoming projects prior to sending to 378 ECONS for solicitation.</li><li>Ensure compliance with all US laws, Kuwait Labor Law, US EPA Guidelines, Final Governing Standards (FGS), Overseas Environmental Baseline Guidance Document (OEBGD), US Building Codes, Department of Defense (DoD) Unified Facilities Criteria (UFC), National Electric Code (NEC), National Electric Safety Code (NESC), Occupational Safety and Health Administration (OSHA) standards, National Fire Protection Association (NFPA) and Institute of Electrical and Electronics Engineering (IEEE) standards. In addition, ensure site activities comply with applicable US, DoD, and Host Country codes and standards to include American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), International Plumbing Code (IPC), National Plumbing Code (NPC), Building &amp; Fire codes concerning health, safety, and the environment in the design and construction of real property facilities at all times.</li><li>Performs other duties as assigned.</li></ul><br><p><b>MATERIAL &amp; EQUIPMENT DIRECTLY USED: </b></p><br><br><ul><li>May be exposed to potentially hazardous conditions that require wear of hard hats, gloves, steel toed boots, hearing protection, safety glasses and other personal protection equipment (PPE); may be required to push, pull and lift heavy equipment.</li><li>Use of Land Mobile Radios, cell phones, laptop, and other devices to maintain contact and accountability of work activities.</li></ul><br><p><b>WORKING ENVIRONMENT:</b></p><br><br><ul><li>Work will be indoors and outdoors.</li><li>Exposure to heat, cold, dust, noise, chemicals may occur.</li><li>Overtime and shift work may be required depending on contractual needs as well as occasional to frequent travel.</li><li>Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions.</li><li>Task specific work environment training maybe provided.</li><li>Must be prepared to function in a wartime or contingency environment to support&nbsp;U.S. interests.</li></ul><br><p><b>PHYSICAL ACTIVITIES:</b></p><br><br><ul><li>Physical requirements include lifting up to 35lb, team lifting up to 50lbs, climbing, extended sitting, or standing, stooping, stretching, and bending.</li><li>Work may require using and wearing personal protective equipment such as, hearing and eye protection, hard hat and steel-toed boots as well as Individual Protective Equipment (IPE) which may include but not limited to Level III plus/IV Individual Body Armor with both front and back ballistic plates, ACH helmet, clothing (undergarments, shirts and pants and/or coveralls), reflective vests/belts, sound suppression devices, etc.</li><li>Day-to-day physical requirements may involve standard office activities including sitting/standing for extended periods of time, attending meetings, use of keyboard and mouse repetitively, lifting and carrying less than 20 lbs. frequently, etc.</li><li>Work requires moderate physical exertion including walking to operating areas and walking up stairs</li></ul><br><p><b>BASIC QUALIFICATIONS:</b></p><br><br><p>Specific contract requirements regarding education and experience will prevail.</p><br><br><ul><li>Bachelor’s Degree in Electrical Engineering with 3 years relevant experience on similar projects.</li><li><b>Must be a U.S. Citizen with a current U. S. Driver's License.</b></li><li><b>Must possess passport book (not passport card) with at least 13 months of remaining validity AND 6 blank visa/stamp pages remaining</b></li><li><b>Must have and maintain a valid U. S. SECRET Security Clearance or ability to obtain a secret clearance before deploying. </b></li><li>Must be able to read, write, speak, and understand English fluently</li><li>Candidate must also meet <b>CENTCOM MOD-15</b> theater requirements.</li></ul><br><p><b>SKILLS:</b></p><br><br><ul><li>Project management, pro-active, well organized, results-oriented, and team player with decision-making ability.</li><li>Use computers &amp; related software such as Microsoft Office and other common products used in office environments or within the Engineering and Construction Industry.</li><li>Able and willing to work periods of long hours to meet mission requirements.</li><li>Excellent interpersonal and communication skills with documented supervisory experience.</li><li>Experience in contingency environments as well as knowledge &amp; experience working with government contracts.</li></ul><br><p><b>KBR Benefits</b></p><br><br><p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supervise and control the entire drilling operation activities during the night shift, ensuring the successful completion of the well and drilling activities while liaising closely with Senior Tool Pusher or deputize for the Senior Tool Pusher when required. At all times considering the safety of personnel, the environment, and equipment to maximize drilling operation efficiency.</p><p>Ensures the safety of personnel, equipment, and the efficiency of operations on the drill floor and other drilling operation associated areas. Plans and schedules all drilling and associated activity. Directs personnel towards achieving optimum job performance according to the client s requirements. Ensures any deviation from client well plan (Game Plan) is approved by STP, and that Client representative has documented in written form, and that necessary management of change or deviation is approved in Synergi prior to operation starts. Consult with the STP and Client s Representative regarding the progress of the Drilling program and associated operations, keeping the driller informed about the ongoing drilling program objectives and communicating any changes in plans. Ensure that space-out drawings are correct and are posted in the drillers cabin. Overseeing that post-jarring sheet are filled out and understood by the driller. Relieve the Driller at the Driller s console as operational requirement demands. Ensures that all necessary equipment is ready for the next phase of the Drilling / Workover program and that necessary rig procedures, including JSA and PTW, are prepared on time and with good quality for the actual operations. Assists &amp; supervises drilling crew at the location at all relevant times, ensuring circulating time is sufficient and the well is stable on trips, when the BHA is being worked and whenever there is a hole problem. Operates the drilling unit with strict adherence to company Drilling &amp; Well Control manuals, by reviewing and approving all drilling related work permits.</p><p>Ensure that well control requirements are in place according to operational requirements - assist in supervising well killing operations in any well control situation. Plans &amp; monitors comprehensive well control parameters to proactively identify any signs of well control issues for early detection and swift response. Maintains and regularly tests well control equipment, in accordance with Company s and Client s requirement, ensuring its readiness and effectiveness in critical situations. Perform all well control calculations (i.e., mud weight increase, initial and final circulating pressures, number of strokes, etc.).</p><p>To be part of the Rig s Emergency Response Team as detailed in the Emergency Plan and Company Procedures. Ensure that all personnel are instructed in the procedures to be adopted in the case of an emergency. Ensure that Well Control and general safety drills are held and recorded in accordance with Company requirements.</p><p>Assist STP in ensuring the location has sufficient stock of parts and materials to perform drilling and associated operations as per contractual requirements. Ensure planned maintenance and repair of drilling equipment including draw-works, mud pumps, top drive, rotary table, and BOP are completed and documented to ensure optimum condition and proper availability of required tools. Responsible for housekeeping standards in all drilling areas, sack store and mud pump room.</p><p>Support STP in planning all related rigs move activities, equipment, supplies, personnel in compliance with the Rig move Procedures. Assesses the current and new location, considering factors such as safety, lifting equipment availability at location, preparation for rig-up operations, Supervise the Rig move team during rigging down and rigging up activities to ensure they are followed efficiently and safely.</p><p>Develops and maintains positive working relationships with other department heads, supervisors, operator's representatives, subcontractors, and all personnel on the rig. Responds to client requests and needs concerning materials, equipment, and personnel after getting adequate management approval.</p><p>Maintains proper logs and records, promptly submitting required reports as per company protocols and regulatory standards. Prepare accurate and timely reports, including daily drilling reports, equipment status reports and incident reports, to document drilling activities and operational performance. Review all operational/technical bulletins, communicate pertinent points to crew members and implement all directives as required. Assist STP in initiating, monitoring, and recording all maintenance and repairs work in collaboration with maintenance department.</p><p>Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work. Mentor, develop and train their team to ensure safe and effective operations. Identifies opportunities for skill and career advancement, works to support the professional growth of their team members. Ensure their team receives the necessary required training to perform their duties safely and effectively through on-the-job training, classroom training and participation in safety drills and exercises. Support, promote and actively participate in ADES s Competency Assurance Program for their team. Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive ADVANCE process to formalize a performance management culture.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum education level required: High School or Vocational/Technical Qualification.</p><p>Minimum (8) years of working experience in land drilling and workover operations with contractors with a career history showing time served as Assistant Driller, Driller, and Tool pusher.</p><p>Must have working experience on Onshore rigs.</p><p>Fluent in English (written &amp; spoken).</p><p>PC literate in Microsoft Office</p><p>Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids.</p><p>Leadership, Situation Awareness, Communication, Teamwork, Performance shaping factors stress and fatigue, inspecting work.</p><p>Regularly climbing (stairs, ladders).</p><p>Regularly bending, twisting, and standing.</p><p>Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat etc.).</p><p>Ability to work on day/night shifts.</p><p>As per ADES Training Matrix.</p><p>Valid Well Control (Well Sharp / IADC) Certificate.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The WAN Engineer is required to be certified at the expert level in multiple disciplines of networks and security (e.g. CCNP/CCIE &amp; CISSP). WAN Engineers performs operation and maintenance (O&amp;M) for the RCC-SWA enterprise network infrastructure. WAN Engineers will ensure stability and provide daily support of a geographically dispersed Wide Area Network Infrastructure and are responsible for design, troubleshooting, optimization, administration, change management and technical documentation. Must have expert knowledge of Cisco routers, switches, VPN devices, and routing protocols. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Responsible for maintaining and operating routers and switches throughout the Southwest Asia Area of Responsibility. Configures Open Short Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Border Gateway Protocol (BGP), Multi-Protocol BGP (MP-BGP), Dynamic Multipoint Virtual Private Networking (DMVPN), Multi-Protocol Label Switching (MPLS), Virtual Routing and Forwarding (VRF), and Quality of Service (QoS). + Identify problems and troubleshoot DMVPN phases 1-3. + Evaluates network performance and adjusts the network infrastructure hardware and software to include, but not limited to, routers, switches, and network management tools, in order to operate and optimize network performance. + Perform regular system maintenance in support of IAVA vulnerabilities and CCRI compliance. + Perform capacity planning for communications networks carrying data, voice, and video. + Monitors availability and reliability of the WAN and supported infrastructure utilizing DX NetOps Spectrum, SolarWinds Orion and Cisco DNA Center. + Executes engineering best practices in network builds, integration, testing, and documentation while adhering to security fundamentals provided by DISA’s Security Technical Implementation Guides (STIGs). + Ensure that all managed technologies are compliant with current DISA Security Technical Implementation Guides (STIGs). + Assist with identifying and investigating malicious network activity. + Create, update, and maintain detailed network diagrams. + Create and track network issues/requests using the ServiceNow ticketing system. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Requires an active Secret Clearance + Education / Certifications: One-year related experience can be substituted for one year of education if the degree is required. + Associates Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. + This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. + The authorized certifications for this job title are listed as follows: + BASELINE: + Cisco: CCNP: Certified Network Professional - Security (Cannot be used as a dual qualifier) + CompTIA: CASP+ ce: Advanced Security Practitioner + CompTIA: SecurityX ce + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler + ISACA: CISA: Certified Information Systems Auditor + ISC2: CCSP: Certified Cloud Security Professional + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + COMPUTING ENVIRONMENT (CE): + Cisco: CC-DN-A: Certified DevNet Associate + Cisco: CCIE: Certified Internetwork Expert (Any) + Cisco: CCNP: Certified Network Professional (Any) (Cannot be used as a dual qualifier) + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + At least 10 years of practical experience working with network and systems technologies. + A high level of understanding and experience with data network systems, routing, switching, Virtual Routing and Forwarding (VRF), MPLS, and layer 2 protocols. + Experience with VPN technologies. + A solid background with TCP/IP and must be able to troubleshoot all supported network protocols. + Experience with creating and maintaining custom python scripts. + Experience working with and maintaining Cisco DNA Center + Experience with a customer service-oriented company. + Skills &amp; Technology Used: + Ability to verify that all systems under the direct control of RCC-SWA are properly configured in accordance with the Higher Headquarters, Local, and DISA STIG configuration policies. + Ability to manage asset documentation for accreditation and authorization. + Ability to assess networking requirements and provide solutions. + Ability to make accurate and independent decisions under pressure. + Ability to successfully execute many complex tasks simultaneously. + Expert ability to troubleshoot infrastructure equipment. + Excellent organizational, interpersonal, written, and verbal communication skills + Ability to perform comfortably in a fast-paced, deadline-oriented work environment. + Ability to successfully execute many complex tasks simultaneously across departmental boundaries. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Construction Manager provides on-site administrative, technical management, and leadership for the design and contract compliance, and construction of large multi-million-dollar Government funded construction project at a specified project site. Principal Accountabilities (Typical duties include the following, although specific duties vary by assignment or contract.) • Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule. • Ensures construction adheres to construction specifications. • Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc. Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required. • Logs, references, distributes, and files all related correspondence, drawings, and documents. • Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned). • Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and SOPs for security, safety, environmental controls, hazardous materials and underground utilities. • Visits construction sites and submits required construction reports to monitor progress against schedule/timelines. • Cooperates with visiting Government and DI personnel conducting official inspection visits and surveys and participate in their briefing or orientation. • Provides leadership, mentoring, and professional development to assigned staff. • Manages the work of teams to procure and construct work. • Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion. • Attends meetings as required including design and construction reviews and construction kickoff meetings. • Performs other qualified duties as assigned. Knowledge &amp; Skills • Knowledge of cost controls, contractual and project management of international construction projects. • Shall also be versed in the International Building Code, NFPA Fire Codes and the NEC in addition to general construction practices. • Knowledge of construction materials, processes, techniques, and methods. • Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations. • Knowledge of Service Contract Act and Truth in Negotiations Act. • Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract. • Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA). • Knowledge of accounting practices including DynCorp s disclosed accounting practices. • Effective leadership and interpersonal skills. • Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps forward operating bases, and major civil projects. • Excellent communication and organizational skills are essential. • Able to use Project and Construction Management planning and reporting tools such as Microsoft Project and Primavera. Experience &amp; Education • HS diploma or equivalent • Bachelor s degree in engineering, construction technology, or construction management (preferred). • Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance. • Minimum seven (7) years of construction field experience in all phases of Civil and Building Construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience. • Experience with mechanical projects (HVAC, plumbing) and electrical projects. • Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification. • Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices. • Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities. • An EIT or Professional Certification/Project Management Certification is desired. • Additional knowledge/skills may be required by contract or assignment. Physical Requirements/Working Environment • Works in a normal office environment with controlled temperature and lighting conditions. • May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>HS diploma or equivalent</li><li>Bachelor s degree in engineering, construction technology, or construction management (preferred).</li><li>Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance.</li><li>Minimum seven (7) years of construction field experience in all phases of Civil and Building Construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience.</li><li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li><li>Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li><li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices.</li><li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li><li>An EIT or Professional Certification/Project Management Certification is desired.</li><li>Additional knowledge/skills may be required by contract or assignment.</li></ul><p></p></section>

Job Summary<br><br> JOB DESCRIPTION <br><br>The Application Engineer assists customers by identifying the best solution for their application, offers and sells complete product solutions from the Flow Controls portfolio, provides commercial and technical support to customers, and strives to deliver the highest standards of customer service while working closely with peers, Outside Sales, Service Engineers, Business Managers, and other stakeholders.<br><br>The Application Engineer will be based in Kuwait or Qatar. Key customers include NOC, Dolphin Energy, QAFCO, QChem, QELNG, and QE in Qatar, as well as KOC, KNPC, and Equate in Kuwait.<br><br>In This Role, Your Responsibilities Will Be:<br><br>Provide Applications Engineering, technical, and pricing support to customers in Qatar and Kuwait, including technical presentations and site walkdowns. Perform sizing and selection of control valves and other FCV products, review project specifications, and prepare deviation lists. Prepare customer quotations that are timely, technically accurate, commercially verified, and offer the best overall solution. Conduct direct customer technical sales calls, order closeouts, site walkdowns, and prepare associated reports. Coordinate with GIS and Engineering teams to conduct root cause analysis and develop solutions for severe-service applications and complex products. Present detailed technical solutions and recommendations to customers. Follow up on quotations with customers and the outside sales team until purchase orders are secured. Ensure purchase orders are commercially and technically compliant before order entry and process error-free orders to the appropriate factories. Coordinate with Project Management, Order Entry, and Customer Order Fulfillment (COF) teams to provide clean orders to factories and support customers with post-order documentation and requirements. Collaborate with the Flow Control Sales Manager and Application Manager to achieve sales targets and departmental KPIs. Maintain records and information within Emerson systems and tools, including Share Point and CRM platforms. Ensure compliance with Emerson Trade Compliance, Quality Management procedures, and Ethics policies. Stay current with product developments, industry trends, and market requirements.<br><br>Who You Are<br><br>Experienced in control valve products, applications, and Fisher sizing and selection tools. Experienced in selling control valve products and services to hydrocarbon, chemical, and petrochemical end users. Knowledgeable in industrial standards related to control valve design, manufacturing, and testing processes.<br><br>For This Role, You Will Need<br><br>Minimum 5 to 8 years of experience in the process control industry, including control valve products and applications. Bachelor’s degree in Engineering (Instrumentation, Mechanical, Chemical) or equivalent.<br><br>Preferred Qualifications That Set You Apart<br><br>Experience with control valve sizing and selection tools, including Fisher FF2. Strong interpretation skills related to engineering drawings, specifications, and P&ID documentation. Excellent communication and presentation skills. Ability to make sound technical decisions based on engineering principles, standards, and applicable codes. Ability to interact effectively with customers and adapt to diverse cultural environments.<br><br>Our Culture and Commitment To You<br><br>At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives—because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams working together are key to driving growth and delivering business results.<br><br>We recognise the importance of employee wellbeing and offer competitive benefits designed to support the physical, mental, financial, and social needs of employees and their families. Our offerings include medical insurance, employee assistance programmes, tuition reimbursement, employee resource groups, recognition programmes, and additional wellbeing resources. We also support work-life balance through flexible time-off programmes, including parental leave, vacation, and holiday benefits.<br><br>At Emerson, learning and development are integral to career growth. From onboarding through senior leadership development, employees have access to a wide range of opportunities, including instructor-led and virtual training, mentoring, coaching, project assignments, and hands-on learning experiences that help build skills and advance careers.<br><br>About Us<br><br>WHY EMERSON<br><br>Our Commitment to Our People<br><br>At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration.<br><br>We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world’s most complex problems — for our customers, our communities, and the planet. You’ll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor.<br><br>At Emerson, you’ll see firsthand that our people are at the center of everything we do. So, let’s go. Let’s think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let’s go, together.<br><br>Accessibility Assistance or Accommodation<br><br>If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com .<br><br>About Emerson<br><br>Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability.<br><br>With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety.<br><br>We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you’re an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you’ll find your chance to make a difference with Emerson. Join our team – let’s go!<br><br>No calls or agencies please.

<p><br></p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>Troubleshooting and Repairs:</strong> Diagnosing mechanical problems, faults and malfunctions in mechanical equipment and systems, using diagnostic tools, equipment manuals, and technical documentation to troubleshoot complex mechanical issues and implementing effective solutions to restore functionality and minimize downtime. Communicate equipment problems or break down information via Senior Tool Pusher to technical maintenance support team.</p><p><strong>Equipment Maintenance &amp; Operations:</strong> Maintaining the reliability and integrity of rig mechanical equipment and systems, including drilling, mechanical, and safety systems. Overseeing the maintenance, repair, and servicing of mechanical equipment at location, including but not limited to engines, generators, pumps, compressors, cranes, and hydraulic systems, to ensure optimal performance of the rig. Survey the condition of all well control equipment in use each shift, report any system issues to the Senior tool pusher and raise corrective work order to manage the repair. Will inform by e mail both the Senior tool pusher and office based well control equipment superintendent of the equipment status so Contractual and API compliance can be assessed. Ensure that repairs, needed or made, are registered in the form of a work order in the company maintenance system. Carry out Planned maintenance work orders on time with good quality and record actual work done, inform Senior Tool pusher where access to perform work is not granted. Ensure Mechanical and Drill crew reference OEM manuals when carrying out PM or CM work on any rig equipment do not reply solely on the PM work instruction. Supervise the oil sample program and review the results, ensure work orders are raised to rectify bad samples. Spot check lubrication carried out by drilling crew for quality. Maintain and repair power plants and monitor power distribution ensure power is always available. Verification and inspection of third-party equipment and installations when required. Ensure new equipment installations on the drilling unit are managed by management of change Synergi case where appropriate as outlined in the ADES management system by highlighting the potential need to Senior Tool Pusher.&nbsp;</p><p><strong>Materials &amp; Equipment:</strong> Plan and coordinate with the Senior Tool Pusher and other departments to secure equipment s and perform safety inspections prior to any operations or major activity such as rig moves, running &amp; retrieving BOP. Ensuring that the appropriate mechanical requirements of the statutory and regulatory bodies including the classification society are adhered to and records maintained. Maintain inventory of spare parts, consumables, and supplies for mechanical equipment, ensuring adequate stock levels are maintained to support ongoing operations and maintenance activities. Coordinating with procurement and logistics teams to procure spare parts and replacement components as needed, ensuring timely delivery, availability &amp; compliance with the class &amp; certification requirements. Responsible for housekeeping standards in machinery and workshop areas. Machine and switchboard areas to be kept clear of all flammable materials.</p><p><strong>Rig Move:</strong> Ensure that all mechanical equipment s are properly secured and protected for transportation, while overseeing the disassembly and loading of equipment s onto transport vehicles. Supervise the rig move crew to reassemble and install all mechanical equipment s at the new location and perform the final checks on the system to ensure they are ready for drilling operations.</p><p><strong>Client Management:</strong> Promote and maintain an effective working relationship with other departments, third party personnel and Client Representatives. Responds to client requests and needs concerning materials, equipment, and personnel after getting adequate management approval.</p><p><strong>Reporting and Documentation:</strong> Maintains proper logs and records of all mechanical maintenance activities, equipment inspections, and repairs in accordance with company procedures and regulatory requirements. Responsible for the quality of the Planned maintenance system work reports for PM and CM work orders for Mechanical department Prepare accurate and timely reports, including daily equipment status reports, incident reports, job safety analysis for hazardous activities. Ensure the permit to work and isolation systems are followed and applied. Supply information to assist in the development of maintenance and repair budget.</p><p><strong>People Management:</strong> Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work. Mentor, develop and train their team to ensure safe and effective operations. Identifies opportunities for skill and career advancement, works to support the professional growth of their team. Ensure their team receives the necessary required training to perform their duties safely and effectively through on-the-job training, and participation in safety drills and exercises. Support, promote and actively participate in ADES s Competency Assurance Program for their team. Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive ADVANCE process to formalize a performance management culture.</p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Time served in the oil field as mechanic with relevant training certificates and references may be accepted in place of apprenticeship. Minimum three (3) years of working experience in the mechanical field in drilling and workover operations and have demonstrable supervisory skills. Preferred to have working experience on land rigs or offshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in the English language (Spoken &amp; Written) PC literate in Microsoft Office Situation Awareness, Communication, Teamwork, detail oriented, Problem Solving.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to workday or night shift as required with 12 hours minimum shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p><strong>Desired Candidate Profile</strong></p><p>Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Time served in the oil field as mechanic with relevant training certificates and references may be accepted in place of apprenticeship. Minimum three (3) years of working experience in the mechanical field in drilling and workover operations and have demonstrable supervisory skills. Preferred to have working experience on land rigs or offshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in the English language (Spoken &amp; Written) PC literate in Microsoft Office Situation Awareness, Communication, Teamwork, detail oriented, Problem Solving.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to workday or night shift as required with 12 hours minimum shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Construction Manager provides on-site administrative, technical management, and leadership for the design and contract compliance, and construction of large multi-million-dollar Government funded construction project at a specified project site. Principal Accountabilities (Typical duties include the following, although specific duties vary by assignment or contract.) Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule. Ensures construction adheres to construction specifications. Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc. Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required. Logs, references, distributes, and files all related correspondence, drawings, and documents. Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned). Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and SOPs for security, safety, environmental controls, hazardous materials and underground utilities. Visits construction sites and submits required construction reports to monitor progress against schedule/timelines. Cooperates with visiting Government and DI personnel conducting official inspection visits and surveys and participate in their briefing or orientation. Provides leadership, mentoring, and professional development to assigned staff. Manages the work of teams to procure and construct work. Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion. Attends meetings as required including design and construction reviews and construction kickoff meetings. Performs other qualified duties as assigned. Knowledge &amp; Skills Knowledge of cost controls, contractual and project management of international construction projects. Shall also be versed in the International Building Code, NFPA Fire Codes and the NEC in addition to general construction practices. Knowledge of construction materials, processes, techniques, and methods. Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations. Knowledge of Service Contract Act and Truth in Negotiations Act. Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract. Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA). Knowledge of accounting practices including DynCorp s disclosed accounting practices. Effective leadership and interpersonal skills. Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps forward operating bases, and major civil projects. Excellent communication and organizational skills are essential. Able to use Project and Construction Management planning and reporting tools such as Microsoft Project and Primavera. Experience &amp; Education HS diploma or equivalent Bachelor s degree in engineering, construction technology, or construction management (preferred). Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance. Minimum seven (7) years of construction field experience in all phases of Civil and Building Construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience. Experience with mechanical projects (HVAC, plumbing) and electrical projects. Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification. Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices. Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities. An EIT or Professional Certification/Project Management Certification is desired. Additional knowledge/skills may be required by contract or assignment. Physical Requirements/Working Environment Works in a normal office environment with controlled temperature and lighting conditions. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure. OTHER RESPONSIBILITIES Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>HS diploma or equivalent Bachelor s degree in engineering, construction technology, or construction management (preferred). Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance. Minimum seven (7) years of construction field experience in all phases of Civil and Building Construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience. Experience with mechanical projects (HVAC, plumbing) and electrical projects. Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification. Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices. Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities. An EIT or Professional Certification/Project Management Certification is desired. Additional knowledge/skills may be required by contract or assignment.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The SharePoint Administrator/Developer will provide enterprise-level SharePoint administration, development, and customer support to military and civilian users. This role requires expertise in SharePoint infrastructure design, deployment, customization, and maintenance to ensure optimal system performance and user experience. The administrator will be responsible for gathering business requirements, designing tailored SharePoint solutions, and implementing best practices for collaboration, document management, automation, and security. This position demands strong skills in SharePoint Online, SharePoint 2019, Power Platform (Power Automate, Power Apps, Power BI), and Microsoft 365 integration to enhance operational efficiency. The candidate will work closely with stakeholders to analyze business needs, develop scalable solutions, and ensure compliance with enterprise security policies and military standards. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. . Responsibilities + Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level. + Manage SharePoint Enterprise Search, including index configurations and scheduling. + Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours. + Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring. + Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI). + Develop and maintain high-level technical and engineering documentation. + Act as the SharePoint subject matter expert, providing training and end-user support. + Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM). + Customize SharePoint Online and SharePoint 2019 sites using modern design templates, JSON formatting, and adaptive cards. + Develop, automate, and manage workflows using Power Automate (Flow) and Microsoft Forms. + Ensure compliance with Zero Trust Security models, Microsoft Security &amp; Compliance Center policies, and Information Assurance (IA) standards. + Apply Security Technical Implementation Guidelines (STIGs) for governance and security. + Troubleshoot site-related issues, manage user permissions, and assist with site creation and configuration. + Automate SharePoint administration tasks using PowerShell and Microsoft Graph API. + Assist database administrators with configuring and monitoring SQL Server databases supporting SharePoint. + Performs other duties and assignments as required. Qualifications + Qualifications: + Security Clearance: + Requires an active Secret Clearance. + Education / Certifications: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + Associate Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. + This position requires candidates to adhere to DoD 8570.01. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. + The authorized certifications for this job title are listed as follows: + BASELINE: + Cisco: CCNA: Certified Network Associate - Security + Cisco: CCNP: Certified Network Professional - Security + CompTIA: CASP+ ce: Advanced Security Practitioner + CompTIA: Security+ ce + CompTIA: SecurityX ce + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler + GIAC: GICSP: Industrial Cyber Security Professional + GIAC: GSEC: Security Essentials + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + COMPUTING ENVIRONMENT (CE): + Microsoft: 365 Certified: Enterprise Administrator Expert + Microsoft: Certified: Azure Database Administrator Associate + Microsoft: Certified: Azure Security Engineer Associate + Microsoft: Certified: Azure Solutions Architect Expert + Microsoft: MCA: Certified Architect (Any) + Microsoft: MCITP: Database Administrator 2008 + Microsoft: MCITP: Database Developer 2008 + Microsoft: MCITP: Enterprise Administrator + Microsoft: MCITP: SharePoint Administrator 2010 (Technical III for SharePoint Admin only) + Microsoft: MCSA: Certified Solutions Associate: SQL Server 2012 + Microsoft: MCSA: SQL 2016 Database Admin + Microsoft: MCSA: SQL 2016 Database BI Development + Microsoft: MCSA: SQL 2016 Database Dev + Microsoft: MCSA: Windows Server 2008/2012/2016 + Microsoft: MCSD: Microsoft Certified Solutions Developer (Any) + Microsoft: MCSE: Core Infrastructure + Microsoft: MCSE: Data Management and Analytics + Microsoft: MCSE: Productivity Solutions Expert + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + At least five years of hands-on experience with Windows Server administration and Active Directory management, with a strong understanding of security principles, access controls, and compliance best practices in an enterprise environment. + Expert proficiency in web design and development, including HTML5, CSS3, JavaScript, and modern SharePoint Framework (SPFx), React, and TypeScript. + Proven ability to develop, deploy, and manage SharePoint web parts, lists, libraries, and workflows while designing, maintaining, and administering SharePoint portals. + Strong documentation skills with the ability to create technical documentation, user guides, and training materials, along with the capability to interact with key stakeholders, gather business requirements, and translate them into effective SharePoint solutions. + Experience working with Infrastructure, Web Servers (IIS), SharePoint Administration, and Microsoft 365 integration, as well as knowledge of Power Platform (Power Automate, Power Apps, Power BI) for workflow automation and business process optimization. + Experience with a customer service-oriented company. + Skills &amp; Technology Used: + Ability to Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level. + Manage SharePoint Enterprise Search, including index configurations and scheduling. + Ability to Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours. + Ability to Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring. + Ability to Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI). + Develop and maintain high-level technical and engineering documentation. + Act as the SharePoint subject matter expert, providing training and end-user support. + Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM).Demonstrate expertise in modern web development technologies, including: + SPFx (SharePoint Framework) + React + TypeScript + PnP (Patterns and Practices) + Client-Side Object Model (CSOM) At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication:</b></p><ul><li><b></b>The ability to communicate effectively verbally and in writing with employees and customers at all levels.</li><li> Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Professional Skills and Abilities:</b></p><ul><li> Attention to detail and the ability to analyze results.</li><li> Good understanding of quality control procedures and international, local, and regional standards applicable to the food industry.</li><li> Attention to product details and accuracy of observation to detect any errors or defects that deviate from the agreed standards within the company.</li><li> Ability to handle responsibilities with precision.</li><li> Ability to research, analyze, create data, and statistics.</li><li> Ability to write and explain information and prepare professional reports.</li><li> Commitment to professionalism and objectivity.</li><li> Possession of organizational skills to arrange tasks.</li><li> Ability to apply logical analytical skills.</li><li> Quality and excellence in achieving tasks with results and specified quality standards.</li><li> Optimal interaction with the company's work team and mastery of work while maintaining company property and confidentiality.</li><li> Good knowledge of the company's operations and has alertness and strong observation skills.</li></ul><p><br></p><p><b>Tasks and Responsibilities</b></p><ul><li> Implementing policies and procedures of the work department according to the requirements of each of the applicable quality systems in the company, governance, and best practices.</li><li> Directly supporting the implementation of policies related to Total Quality Management (TQM) systems in coordination with the direct supervisor.</li><li> Executing all stages of approved departmental work programs and quality initiatives.</li><li> Maintaining and updating the quality management information database for future reference and reporting.</li><li> Using approved electronic systems to manage and improve quality data and information.</li><li> Monitoring departmental Key Performance Indicators (KPIs), tracking achievement rates, and preparing performance reports for the direct supervisor.</li><li> Ensuring quality awareness guidelines, policies, and instructions are properly communicated and displayed in designated areas.</li><li> Monitoring the implementation of quality management policies and procedures in accordance with the latest applicable international standards and requirements.</li><li> Analyzing quality-related data, statistics, and performance indicators and submitting findings to the direct supervisor.</li><li> Identifying and documenting operational non-conformities through <b>Non-Conformance Reports (NCRs)</b>.</li><li> Monitoring the implementation of approved corrective and preventive actions related to identified non-conformities.</li><li> Conducting compliance checks to ensure adherence to the company's applicable quality management standards and procedures.</li><li> Supporting departments and production facilities during internal quality audits and following up on audit requirements to ensure compliance.</li><li> Monitoring the company's quality documentation and forms management system to ensure all departments are using the latest approved versions of procedures, policies, and quality forms.</li><li> Monitoring product quality and identifying any defects or deviations from established company standards.</li><li> Preparing and submitting quality-related reports to the direct supervisor, including:</li><li> Quality Control Reports</li><li> Non-Conformance Reports (NCRs)</li><li> Quality Objectives Reports</li><li> KPI Analysis Reports</li><li> Quality Performance Reports</li><li> Other reports related to quality management activities.</li><li> Supporting continuous improvement initiatives by identifying trends, potential risks, and opportunities for improving quality performance.</li><li> Performing any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li> Good understanding of quality control procedures and international, local, and regional standards applicable to the food industry.</li><li> Strong attention to detail and ability to identify product defects or deviations from established quality standards.</li><li> Strong analytical and logical thinking skills.</li><li> Ability to collect, analyze, and interpret data and statistics.</li><li> Ability to prepare professional reports and clearly communicate technical information.</li><li> Strong organizational and time-management skills.</li><li> High level of accuracy, accountability, and attention to detail.</li><li> Professional, objective, and ethical approach.</li><li> Strong observation and problem-solving skills.</li><li> Good knowledge of company operations and quality requirements.</li><li> Ability to work effectively with different departments and teams.</li><li> Ability to maintain company confidentiality and protect company property.</li></ul><p>Language Requirements</p><ul><li> Ability to communicate effectively in <b>Arabic or English</b>, both verbally and in writing.</li></ul><p>Educational Qualifications &amp; Experience</p><p><b>Educational Qualifications:</b></p><ul><li>Bachelor's degree in <b>Science or Engineering</b>, or equivalent.</li><li>Diploma in <b>Science or Engineering</b>.</li><li> Preferably, professional certifications in the following areas:</li><li><b>Quality Management Systems – ISO 9001 Lead Auditor</b></li><li><b>Lean Six Sigma</b></li><li><b>Total Quality Management (TQM)</b></li><li><b>Environmental Management System (EMS)</b></li><li><b>Food Safety Management System – ISO 22000</b></li><li><b>FSSC 22000</b></li><li><b>ISO 45001</b></li><li><b>ISO 14001</b></li><li><b>HACCP</b></li><li><b>VACCP</b></li><li><b>TACCP</b></li><li><b>Halal</b></li><li><b>GMP</b></li></ul><p><b>Experience:</b></p><ul><li>Bachelor's degree: <b>Minimum 5 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li><li>Diploma: <b>Minimum 3 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li></ul><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for monitoring and implementing quality management policies and procedures across the company, particularly within food industry operations. The role involves analyzing quality data, monitoring compliance, identifying non-conformities, supporting corrective actions, maintaining quality documentation, and preparing reports to ensure adherence to established quality standards and continuous improvement objectives.</p><p>Key Responsibilities</p><ul><li>Implement department policies and procedures in accordance with the company's quality management systems, governance requirements, and best practices.</li><li>Support the implementation and maintenance of Total Quality Management (TQM) systems in coordination with the direct supervisor.</li><li>Execute approved departmental work programs and quality initiatives.</li><li>Maintain and update the quality management information database for future reference and reporting.</li><li>Use approved electronic systems to manage and improve quality data and information.</li><li>Monitor departmental Key Performance Indicators (KPIs), track achievement rates, and prepare performance reports for the direct supervisor.</li><li>Ensure quality awareness guidelines, policies, and instructions are properly communicated and displayed in designated areas.</li><li>Monitor the implementation of quality management policies and procedures in accordance with the latest applicable international standards and requirements.</li><li>Analyze quality-related data, statistics, and performance indicators and submit findings to the direct supervisor.</li><li>Identify and document operational non-conformities through <b>Non-Conformance Reports (NCRs)</b>.</li><li>Monitor the implementation of approved corrective and preventive actions related to identified non-conformities.</li><li>Conduct compliance checks to ensure adherence to the company's applicable quality management standards and procedures.</li><li>Support departments and production facilities during internal quality audits and follow up on audit requirements to ensure compliance.</li><li>Monitor the company's quality documentation and forms management system to ensure all departments are using the latest approved versions of procedures, policies, and quality forms.</li><li>Monitor product quality and identify any defects or deviations from established company standards.</li><li>Prepare and submit quality-related reports to the direct supervisor, including:</li><li>Quality Control Reports</li><li>Non-Conformance Reports (NCRs)</li><li>Quality Objectives Reports</li><li>KPI Analysis Reports</li><li>Quality Performance Reports</li><li>Other reports related to quality management activities.</li><li>Support continuous improvement initiatives by identifying trends, potential risks, and opportunities for improving quality performance.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Good understanding of quality control procedures and international, local, and regional standards applicable to the food industry.</li><li>Strong attention to detail and ability to identify product defects or deviations from established quality standards.</li><li>Strong analytical and logical thinking skills.</li><li>Ability to collect, analyze, and interpret data and statistics.</li><li>Ability to prepare professional reports and clearly communicate technical information.</li><li>Strong organizational and time-management skills.</li><li>High level of accuracy, accountability, and attention to detail.</li><li>Professional, objective, and ethical approach.</li><li>Strong observation and problem-solving skills.</li><li>Good knowledge of company operations and quality requirements.</li><li>Ability to work effectively with different departments and teams.</li><li>Ability to maintain company confidentiality and protect company property.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate effectively in <b>Arabic or English</b>, both verbally and in writing.</li></ul><p>Educational Qualifications &amp; Experience</p><p><b>Educational Qualifications:</b></p><ul><li>Bachelor's degree in <b>Science or Engineering</b>, or equivalent.</li><li>Diploma in <b>Science or Engineering</b>.</li><li>Preferably, professional certifications in the following areas:</li><li><b>Quality Management Systems – ISO 9001 Lead Auditor</b></li><li><b>Lean Six Sigma</b></li><li><b>Total Quality Management (TQM)</b></li><li><b>Environmental Management System (EMS)</b></li><li><b>Food Safety Management System – ISO 22000</b></li><li><b>FSSC 22000</b></li><li><b>ISO 45001</b></li><li><b>ISO 14001</b></li><li><b>HACCP</b></li><li><b>VACCP</b></li><li><b>TACCP</b></li><li><b>Halal</b></li><li><b>GMP</b></li></ul><p><b>Experience:</b></p><ul><li>Bachelor's degree: <b>Minimum 5 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li><li>Diploma: <b>Minimum 3 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li></ul><p><br></p><p><br></p><p><br></p></div>