وظائف مهندس ميكانيكا معدات ثقيلة

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Mechanical Engineer ensures the safety, efficiency, and continuous operation of a facility’s water, sanitation, and fire suppression systems. They conduct routine inspections, manage preventive maintenance schedules, troubleshoot system failures, and ensure full compliance with international safety standards and local regulations.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Responsibilities:</p><ul><li>Lead preventive and corrective maintenance (PM/CM) operations on plumbing and fire protection systems.</li><li>Troubleshoot faults, leaks, or pressure drops in domestic water, drainage, sewage, and firefighting systems.</li><li>Oversee the servicing of fire pumps, hydrants, standpipes, wet/dry risers, and sprinkler or clean-agent suppression systems.</li><li>Ensure all building operations comply with NFPA, local fire department mandates, and international plumbing codes.</li><li>Regularly audit, test, and recertify backflow preventers, fire alarms, and fire-rated barriers.</li><li>Conduct fire risk assessments and develop mitigation strategies for existing facility structures.</li><li>Supervise on-site technicians and review the performance of external maintenance contractors.</li><li>Evaluate proposed modifications or retrofits and write clear technical specifications for vendor procurement.</li><li>Candidates must be bilingual.</li><li>Should have a valid Kuwait Driving License.</li><li>Bachelor of Mechanical Engineering Degree.</li><li>Required minimum <b>10 years of experience</b> in the related field.&nbsp;</li></ul><p><br></p><p><br></p></div>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><p>An Associate s degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field. Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards. I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years. Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems. Must have an Active Secret US Government Clearance. US Citizenship is required to obtain a Secret Clearance.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role &amp; responsibilities</b> 1. Design Review and Enhancement: Evaluate and enhance mechanical designs to ensure compliance with industry standards and project requirements. Provide technical expertise in HVAC equipment design and selection, offering optimization and efficiency improvement suggestions. 2. Systems Knowledge: Possess in-depth knowledge of HVAC systems, fire-fighting pump selection, and understanding of LPG, water, and drainage systems. Demonstrate proficiency in selecting and integrating HVAC equipment into project designs. 3. Statutory Compliance: Stay abreast of and ensure compliance with local regulations and statutory requirements related to HVAC, LPG, water, and drainage systems. Advise project teams on regulatory considerations and necessary adjustments to maintain compliance. 5. Maintenance Expertise: Exhibit knowledge and experience in maintaining HVAC equipment, providing valuable insights for optimal performance and longevity. 6. Consultant and Contractor Collaboration: Have a comprehensive background working in consultancy, contributing to developing and refining project designs. Collaborate effectively with contractors, offering technical support and guidance during project implementation. 7 . Site Evaluation: Oversee site evaluations, providing instructions to on-site engineers and addressing any issues. Ensure that project specifications are met during the evaluation/supervision phase.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>4. Experience: Bring a wealth of experience exceeding 5 years in mechanical engineering, focusing on HVAC systems and related disciplines.</p><p>Bachelors degree in mechanical engineering. work experience in consultancy and contracting firms.</p><p></p></section>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Primary objective</h4> <p>Development and management of construction and completions capability across PMC projects ensuring that design integrity is not compromised while managing the department in the execution of the process. Managing and executing the projects according to the field contract.</p> <h4>What you will do:</h4> <ul> <li>Promote and drive the involvement of construction in areas of technical design, schedule, preliminary execution planning, and cost estimating.</li> <li>Develop and maintain a familiarity and appreciation of capability and ongoing workload of construction’s support providers/contractors.</li> <li>Develop and maintain functional responsibility for all construction and completions personnel.</li> <li>Technical competence of construction personnel.</li> <li>Forecast requirement for construction engineering resources and allocate those resources.</li> <li>Prepare man hour estimates to perform project tasks.</li> <li>Promote cost reduction and productivity enhancing initiatives.</li> <li>Prepare weekly progress and expenditure reports on a project specific basis.</li> </ul> <h4>What you will bring:</h4> <ul> <li>Familiar with management of heavy lifting equipment and large earth moving activities.</li> <li>Demonstrated experience of working in the oil & gas industry. Must have proven track record in leading a team.</li> <li>Pre-commissioning and commissioning and performance testing experience.</li> <li>Experienced in the specification, evaluation and documentation of equipment.</li> <li>Work is performed in accordance with broad technical guidelines and with minimal supervision.</li> <li>Ability to work to tight deadlines and prioritization of work to achieve them.</li> </ul> <h4>Qualifications / experience</h4> <ul> <li>Full-time bachelor’s degree in engineering from an accredited university.</li> <li>Minimum 10 years of total experience post graduate studies.</li> <li>Minimum 5 years of experience in the oil & gas, refinery, or petrochemical industry.</li> <li>Minimum 5 years of recent experience as a lead construction engineer or equivalent.</li> </ul> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

Driver <br><br> Job Id :100195362<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Ten Wellness is seeking an experienced Heavy Driver to join our growing team in Kuwait. The successful candidate will be responsible for the safe and timely transport of goods, staff, or equipment across our branches, maintaining professionalism and reliability at all times.<br><br>Key Requirements<br><br> Visa 18, transferable Age between 25 – 40 years Good command of English (spoken and written) Available for immediate joining and must be in Kuwait Valid heavy driving license with relevant experience Clean driving record and strong knowledge of Kuwait road regulations Physically fit and able to handle loading/unloading duties as required<br><br>Compensation & Benefits<br><br>Monthly salary: KWD 250<br><br>Contract duration: 2 years<br><br>Standard employment benefits per Kuwait Labour Law<br><br>How To Apply<br><br>Interested candidates can send their CV via Whats App to + (Whats App messages only, no calls)<br><br>Search Local Jobs<br><br>Basic Details<br><br>Qualification<br><br>Posted : 1 day ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 99128956<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a highly skilled Senior HVAC Engineer to join our dynamic team in Kuwait, where you will play a pivotal role in delivering innovative HVAC solutions for diverse construction projects. This position is ideal for a seasoned professional who is eager to lead and influence the technical direction of our projects while collaborating with various stakeholders. Your expertise will not only contribute to the successful execution of projects but also enhance our team's reputation for excellence in the industry.</p><p>As a Senior HVAC Engineer, you will have the opportunity to mentor junior engineers and foster a culture of learning and development within the team. We believe in investing in our employees' growth, which is why we offer continuous training programs and workshops that will help you stay ahead of industry trends and technologies. This role is not just about managing projects; it’s about shaping the future of our engineering practices and ensuring that our solutions are sustainable and efficient.</p><p>In this strategic position, you will collaborate closely with project managers, architects, and other engineering disciplines to ensure that all HVAC systems are designed and implemented to meet the highest standards of quality and performance. Your leadership will drive cross-functional initiatives that align with our business vision, ultimately contributing to the successful completion of projects that exceed client expectations. Join us and take the next step in your career, where your contributions will have a lasting impact on the industry.</p><ol><li><b>Responsibilities:</b>Lead the design and implementation of HVAC systems for various construction projects, ensuring compliance with local codes and standards while utilizing advanced design software to optimize system performance.</li><li>Conduct thorough analysis and calculations to determine the heating and cooling loads for buildings, applying energy-efficient practices that align with sustainability goals and client requirements.</li><li>Oversee the installation of HVAC systems on-site, coordinating with contractors and subcontractors to ensure adherence to design specifications and project timelines.</li><li>Review and approve technical submittals, shop drawings, and equipment selections to ensure that they meet project specifications and quality standards.</li><li>Provide technical support and guidance to junior engineers and other team members, fostering a collaborative environment that encourages knowledge sharing and professional development.</li><li>Monitor project progress and budgets, implementing corrective actions as necessary to ensure projects are delivered on time and within financial constraints.</li><li>Conduct regular site inspections and quality control checks to identify potential issues and ensure that HVAC installations meet design and performance criteria.</li><li>Collaborate with other engineering disciplines to integrate HVAC systems with electrical, plumbing, and structural components, ensuring seamless project execution.</li><li>Stay updated on industry advancements and emerging technologies in HVAC systems, incorporating innovative solutions into project designs to enhance efficiency and performance.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in HVAC design software such as AutoCAD and Revit, enabling precise and efficient system designs.</li><li>Strong knowledge of building codes and standards related to HVAC systems, ensuring compliance and safety in all projects.</li><li>Excellent analytical skills to perform load calculations and energy modeling for various building types.</li><li>Effective project management abilities, capable of leading teams and managing multiple projects simultaneously.</li><li>Outstanding communication skills, facilitating collaboration with stakeholders and team members across various disciplines.</li><li>Experience with sustainable design practices and technologies, promoting energy efficiency and environmental responsibility.</li><li>Ability to mentor and develop junior engineers, fostering a culture of continuous improvement and professional growth within the team.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><span><strong>Primary Objective</strong></span></span></p><br><p><span><span>Development and Management of construction and completions capability across PMC projects&nbsp;ensuring that design integrity is not compromised while managing the department in the execution of the process. </span>Managing and executing the Projects according to the Field Contract.</span></p><br><p><span><strong>What you will do:</strong></span></p><br><ul><li><span>Promote and drive the involvement of Construction in areas of technical design, schedule, preliminary execution planning, and cost estimating.</span></li><li><span>Develop and maintain a familiarity and appreciation of capability and ongoing workload of Construction’s support providers / contractors.</span></li><li><span>Develop and maintain functional responsibility for all construction and completions personnel.</span></li><li><span>Technical competence of construction personnel.</span></li><li><span>Forecast requirement for construction engineering resources and allocate those resources.</span></li><li><span>Prepare man hour estimates to perform project tasks.</span></li><li><span>Promote cost reduction and productivity enhancing initiatives.</span></li><li><span>Prepare weekly progress and expenditure reports on a project specific basis.</span></li></ul> <p><span><strong>What you will Bring</strong>:</span></p><br><ul><li><span>Familiar with Management of Heavy lifting equipment and large Earth moving activities.</span></li><li><span>Demonstrated experience of working in the Oil &amp; Gas industry -Must have proven track record in leading a team.</span></li><li><span>Pre-commissioning and Commissioning and Performance Testing experience.</span></li><li><span>Experienced in the specification, evaluation and documentation of equipment.</span></li><li><span>Work is performed in accordance with broad technical guidelines and with minimal supervision.</span></li><li><span>Ability to work to tight deadlines and prioritization of work to achieve them.</span></li></ul><p><span><strong>Qualifications / Experience</strong></span></p><br><ul><li><span>Full-time Bachelor’s Degree in Engineering from an accredited university&nbsp;</span></li><li><span>Minimum 10 years of total experience post graduate studies</span></li><li><span>Minimum 5 years of experience in the oil &amp; gas, refinery, or petrochemical industry</span></li><li><span>Minimum 5 years of recent experience as a Lead Construction Engineer or equivalent</span>&nbsp;</li></ul><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><span><strong>Primary Objective</strong></span></span></p><br><p><span><span>Development and Management of construction and completions capability across PMC projects&nbsp;ensuring that design integrity is not compromised while managing the department in the execution of the process. </span>Managing and executing the Projects according to the Field Contract.</span></p><br><p><span><strong>What you will do:</strong></span></p><br><ul><li><span>Promote and drive the involvement of Construction in areas of technical design, schedule, preliminary execution planning, and cost estimating.</span></li><li><span>Develop and maintain a familiarity and appreciation of capability and ongoing workload of Construction’s support providers / contractors.</span></li><li><span>Develop and maintain functional responsibility for all construction and completions personnel.</span></li><li><span>Technical competence of construction personnel.</span></li><li><span>Forecast requirement for construction engineering resources and allocate those resources.</span></li><li><span>Prepare man hour estimates to perform project tasks.</span></li><li><span>Promote cost reduction and productivity enhancing initiatives.</span></li><li><span>Prepare weekly progress and expenditure reports on a project specific basis.</span></li></ul> <p><span><strong>What you will Bring</strong>:</span></p><br><ul><li><span>Familiar with Management of Heavy lifting equipment and large Earth moving activities.</span></li><li><span>Demonstrated experience of working in the Oil &amp; Gas industry -Must have proven track record in leading a team.</span></li><li><span>Pre-commissioning and Commissioning and Performance Testing experience.</span></li><li><span>Experienced in the specification, evaluation and documentation of equipment.</span></li><li><span>Work is performed in accordance with broad technical guidelines and with minimal supervision.</span></li><li><span>Ability to work to tight deadlines and prioritization of work to achieve them.</span></li></ul><p><span><strong>Qualifications / Experience</strong></span></p><br><ul><li><span>Full-time Bachelor’s Degree in Engineering from an accredited university&nbsp;</span></li><li><span>Minimum 10 years of total experience post graduate studies</span></li><li><span>Minimum 5 years of experience in the oil &amp; gas, refinery, or petrochemical industry</span></li><li><span>Minimum 5 years of recent experience as a Lead Construction Engineer or equivalent</span>&nbsp;</li></ul><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules.</li><li>Maintains accurate parts inventory during all maintenance activities.</li><li>Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability.</li><li>Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc.</li><li>Diagnoses malfunctions, isolate causes and corrects breaks.</li><li>Tests engine operations, using testing equipment to locate source(s) of malfunction.</li><li>Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices.</li><li>Disassembles and inspects parts for wear, warping, or other defects.</li><li>Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories.</li><li>Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions.</li><li>May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li><li>Highly desired to have a U.S. Passport valid for an additional two years with at least two facing pairs (four total) of blank Visa pages.</li></ul><p></p></section>

<p>Would you like the opportunity to collaborate on a wide range of technical products? Do you enjoy creating innovative and strategic solutions to solve complex problems? Join our cutting-edge Drilling Services team At Baker Hughes our purpose is clear. We take energy forward making it safer, cleaner and more efficient for people and the planet. Our team partners with the business to effectively enable and sustain change to improve our performance. Partner with the best As an Electro-Mechanic Master / General, you will troubleshoot, test, assemble, disassemble and perform the visual inspection of mechanical assemblies. Whilst assisting in repairing and modifying non-conforming equipment, you will perform all test with minimal instruction. As an Electro-Mechanic Master, you will be responsible for:</p><ul><li>Reviewing procedures for assembly, disassembly, and test verification accuracy</li><li>Configuring test stations and systems</li><li>Analysing and interpreting data from environmental tests, and troubleshooting equipment problems</li><li>Assisting in the set-up of experiments and the recordings of experimental data in collaboration with Engineering and Reliability groups</li><li>Testing and evaluating the performance and, if required, repairing general purpose test equipment</li><li>Performing quality assurance activities required by manufacturing or engineering specifications and ISO requirements to ensure compliance.</li><li>Working in compliance with HS&amp;E policies and procedures</li></ul><p>Fuel your passion To be successful in this role you will:</p><ul><li>Have a 3-year technical diploma or associate degree in the electrical/Mechanical field or higher</li><li>Have at least 5 - 10 years of related experience in electro-mechanical function in oil and Gas industry/domain</li><li>High level of knowledge in the maintenance of electronics</li><li>Have advanced skills in soldering and assembling of electro-mechanical devices</li><li>Have the ability to read and interpret blueprints, wiring diagrams, assembly prints and parts lists</li><li>Demonstrate the ability to identify problems and be able to develop solutions</li><li>Have previous experience with Baker Hughes (preferred)</li><li>Display an advanced mechanical aptitude and experience with general hand tools and precision measuring equipment.</li></ul><p>Work in a way that works for you We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns: This role is a shift-based working pattern. Working with us Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other. Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Have a 3-year technical diploma or associate degree in the electrical/Mechanical field or higher</li><li>Have at least 5 - 10 years of related experience in electro-mechanical function in oil and Gas industry/domain</li><li>High level of knowledge in the maintenance of electronics</li><li>Have advanced skills in soldering and assembling of electro-mechanical devices</li><li>Have the ability to read and interpret blueprints, wiring diagrams, assembly prints and parts lists</li><li>Demonstrate the ability to identify problems and be able to develop solutions</li><li>Have previous experience with Baker Hughes (preferred)</li><li>Display an advanced mechanical aptitude and experience with general hand tools and precision measuring equipment.</li></ul>

FABRICATORS<br><br> Job Id :100193888<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Apex Group Intl. GTC is looking for below mentioned category of employees for immediate recruitment; 01. QA/QC Engineers with KOC approval 02. Welding Inspectors with KOC approval 03. Mechanical Engineers with KOC approval 04. Downhill welders 05. Fabricators (Flow Line) 06. Fitters 07. Helpers Interested candidates may send in their C. V's to sim#6 or e-mail us to ''.<br><br>Basic Details<br><br>Qualification<br><br>Posted : 28 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Posted By: Saikumar<br><br>The current job you are viewing is either old or expired<br><br>Kindly look at the latest jobs<br><br>For the related jobs check below<br><br>Hire Resume Writers

<p>We have Openings for Commissioning Engineer - Kuwait (KOC)</p><p><b>Qualification </b>: Dip or BE/B tech- Mechanical</p><p>Industry : Oil &amp; Gas</p><p>exp KOC Approved added advantage</p><p>Experience : Min 15+ years (10 years in Oil&amp;Gas)</p><p>Job Description : * Should have experience in EPC Companies Oil &amp; Gas refinery projects. Lead commissioning activities for refinery and oil &amp; gas projects from pre-commissioning to start-up. Develop and implement commissioning plans, procedures, and schedules. Coordinate with Engineering, Construction, QA/QC, Operations, and Vendors to ensure smooth commissioning. Verify mechanical completion and ensure systems are ready for commissioning. Supervise flushing, cleaning, pressure testing, loop checking, calibration, and functional testing. Lead equipment commissioning including pumps, compressors, tanks, piping, electrical, and instrumentation systems. Coordinate energization, system integration, and plant start-up activities.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Should have experience in EPC Companies Oil &amp; Gas refinery projects. Lead commissioning activities for refinery and oil &amp; gas projects from pre-commissioning to start-up. Develop and implement commissioning plans, procedures, and schedules. Coordinate with Engineering, Construction, QA/QC, Operations, and Vendors to ensure smooth commissioning. Verify mechanical completion and ensure systems are ready for commissioning. Supervise flushing, cleaning, pressure testing, loop checking, calibration, and functional testing. Lead equipment commissioning including pumps, compressors, tanks, piping, electrical, and instrumentation systems. Coordinate energization, system integration, and plant start-up activities.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including mechanical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform mechanical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for mechanical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, PDMS, Smart Plant, CAESAR II, PV Elite or similar).</p></li><li><p>Strong understanding of mechanical systems, codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 10years of experience in mechanical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based / Transferable Visa</p></li></ul><p><br></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p><br></p><p>1. HVAC Design &amp; Equipment Selection</p><p>•Review project drawings, specifications, BOQs, and tender documents.</p><p>•Perform cooling load calculations when required and review project cooling requirements.</p><p>•Design and select VRF systems based on project requirements and manufacturer guidelines.</p><p>•Select indoor units, outdoor units, controls, accessories, and other related equipment.</p><p>•Prepare refrigerant piping layouts and verify piping limitations and system capacities.</p><p>•Prepare equipment schedules and detailed BOQs.</p><p>•Support the selection of packaged units, ducted split systems, and other DX air-conditioning equipment when required.</p><p>•Optimize equipment selections to provide technically compliant and commercially competitive solutions.</p><p>2. Technical Proposals &amp; Submittals</p><p>•Prepare complete technical proposals and equipment selections for projects.</p><p>•Prepare technical submittals including datasheets, equipment schedules, compliance statements, selection reports, drawings, and supporting documents.</p><p>•Review project specifications and prepare detailed compliance statements.</p><p>•Identify deviations from project specifications and propose suitable technical alternatives.</p><p>•Coordinate technical submittals with the sales team before submission to consultants and customers.</p><p>3. Sales &amp; Tender Support</p><p>•Provide technical support to Sales Engineers during tendering and quotation stages.</p><p>•Review customer enquiries and recommend the most suitable HVAC solution.</p><p>•Assist the sales team in preparing accurate BOQs and equipment cost requirements.</p><p>•Support value engineering exercises to improve competitiveness while maintaining project requirements.</p><p>•Attend technical meetings with consultants, contractors, and customers when required.</p><p>•Conduct technical presentations and explain proposed VRF solutions to customers and consultants.</p><p>•Support the sales team during technical negotiations and clarification meetings.</p><p>4. Project &amp; Technical Coordination</p><p>•Coordinate with consultants, MEP contractors, main contractors, and customers regarding technical requirements.</p><p>•Review approved drawings and BOQs before order placement to ensure correct equipment selection.</p><p>•Coordinate with suppliers/manufacturers regarding technical clarifications and special project requirements.</p><p>•Support the project and after-sales teams with technical information during installation and commissioning when required.</p><p>•Review site conditions when necessary and provide recommendations related to equipment application and installation.</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Requirements</p><p><b>Educational Qualifications</b></p><p>Education Degree</p><p>: Bachelor</p><p>Major</p><p>: Mechanical Engineering</p><p><b>Experience</b></p><p>Years of Experience</p><p>: 3 - 5&nbsp;&nbsp;Years</p><p><br></p><p>Field of Experience</p><p><br></p><p>: HVAC application engineering, design, VRF systems, or technical support.</p><p><br></p><p><b>Skills</b></p><p><br></p><p>•Strong technical knowledge of VRF systems and commercial HVAC applications.</p><p>•Strong knowledge of VRF selection and design software.</p><p>•Good understanding of cooling load calculations and HVAC design principles.</p><p>•Ability to read and interpret mechanical drawings, specifications, and BOQs.</p><p>•Good knowledge of refrigerant piping design and VRF system limitations.</p><p>•Knowledge of HVAC controls, central controllers, and BMS integration would be an advantage.</p><p>•Good understanding of equipment selection and technical comparison between different HVAC solutions.</p><p>•Strong analytical and problem-solving skills.</p><p>•Good communication and technical presentation skills.</p><p>•Ability to handle multiple projects and tender submissions simultaneously.</p><p>•Proficiency in AutoCAD &amp; good knowledge of Microsoft Office applications</p><p><b>Other Requirements</b></p><p>Gender</p><p>: Male</p><p>Age</p><p>: 25 - 40&nbsp;&nbsp;Years</p><p>Preferred Language</p><p>: Arabic, English</p><p>Duty Shift / Timings</p><p>: One Shift / 8:00AM to 4:00PM</p><p>Salary &amp; Benefits</p><p>Salary</p><p>: Attractive Salary</p><p>Other Benefits</p><p>: As per the company policy.</p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking an experienced <b>Technical Services Senior Engineer</b> for an exciting opportunity based in <b>Shuaiba, Kuwait</b>. The ideal candidate will have proven experience in technical operations, project execution, and facility management within a plastic manufacturing environment. The role is responsible for overseeing manufacturing equipment, optimizing production processes, managing facility-related projects, ensuring compliance with operational standards, and coordinating with government authorities regarding facility requirements. The ideal candidate will have strong experience in manufacturing machinery, process improvement, audits, and industrial facility management.</p><p><b>Key Responsibilities</b></p><ul><li>Lead technical projects from planning through execution, ensuring delivery within scope, budget, and timeline.</li><li>Oversee the maintenance, performance, and continuous improvement of manufacturing machinery and production equipment.</li><li>Manage facility operations, ensuring infrastructure and utilities support efficient manufacturing activities.</li><li>Monitor and optimize manufacturing processes to improve productivity, quality, and operational efficiency.</li><li>Conduct regular process audits to ensure compliance with established procedures, quality standards, and operational requirements.</li><li>Identify process gaps, recommend corrective actions, and drive continuous improvement initiatives.</li><li>Coordinate preventive and corrective maintenance programs to maximize equipment reliability and minimize downtime.</li><li>Liaise with government authorities to ensure compliance with applicable regulations and obtain necessary approvals.</li><li>Support health, safety, environmental, and regulatory compliance initiatives across the facility.</li><li>Collaborate with Production, Quality, Engineering, and Maintenance teams to resolve technical issues and improve plant performance.</li><li>Prepare technical reports, project updates, maintenance records, and compliance documentation.</li><li>Participate in equipment upgrades, facility expansion projects, and capital investment initiatives.&nbsp;</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications</b></p><ul><li>Bachelor's degree in Mechanical Engineering or Electrical Engineering.</li><li>3-5 years of experience in technical services, engineering, maintenance, or facility management within a manufacturing environment.</li><li>Experience in plastic manufacturing or a similar process industry is highly preferred.</li><li>Strong knowledge of manufacturing machinery, industrial utilities, and production processes.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Requirements &amp; Responsibilities:</p><ul><li>Secondary School completion with <b>IFSAC / PRO-BOARDS / JOIFF Certification</b> (or Equivalent) Firefighter II (Advanced Exterior, Interior Structural).</li><li>Minimum <b>6 years practical experience</b> in a similar trade. Oil &amp; Gas experience will be an added advantage.</li><li>Able to operate all types of heavy and light vehicles, appliances, trucks, and trailers to fires/standby locations or any disaster area.</li><li>Deploy, energize, and monitor the system or equipment and recognize and correct system problems.</li><li>Able to operate fire department communications equipment, relay information, and record information.</li><li>Able to operate radio equipment and discriminate between routine and emergency traffic.</li><li>Able to completely operate and maintain apparatus equipped with <b>Fire Pump</b> as below:</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>a)</b> Able to position a fire department pumper to operate at a fire hydrant and at a static water source, power transfer from vehicle engine to pump, draft, operate pumper pressure control systems, operate the volume/pressure transfer valve (multistage pumps only), operate auxiliary cooling systems, make the transition between internal and external water sources, and assemble hose lines, nozzles, and appliances.</p><p><b>b)</b> Able to deploy portable water tanks as well as the equipment necessary to transfer water between and draft from them, make hydrant-to-pumper hose connections for forward and reverse lays, connect supply hose to a hydrant, and fully open and close the hydrant.</p><ul><li>Able to completely operate and maintain apparatus equipped with <b>Aerial Device</b> as below:</li></ul><p><b>a)</b> Determine a correct position for the apparatus, maneuver apparatus into that position, and avoid obstacles to operations.</p><p><b>b)</b> Able to raise, rotate and position to a specific location, as well as lock, unlock, retract, lower, and bed the aerial device.</p><ul><li>Able to completely operate and maintain apparatus equipped with <b>Mobile Water Supply Apparatus</b>.</li><li>Physically and mentally fit for the job.</li><li>Ready to work in rotating shifts.&nbsp;</li></ul><p><br></p><p><br></p><p><br></p></div>

Driver <br><br> Job Id :100195359<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Position: Heavy License – Half Lorry Driver<br><br>Requirements<br><br>Valid Kuwait Heavy Driving License<br><br>Must know basic English reading<br><br>Experienced Drivers Preferred<br><br>Immediate joining required<br><br>⚠️ Only candidates who strictly meet the above criteria should contact:<br><br>Mr. Francisco Vaz<br><br>???? 60014337<br><br>Basic Details<br><br>Location : Sharq , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 60014337<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<strong>Overview</strong> <br> <br> <p> <strong>**This position will be physically located in Kuwait**</strong> </p> <p> </p> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <p> </p> <p>Under the supervision of the Lead Technical Inspector, performs initial, in-progress and final inspections on various types of military, commercial, and other forms of Automotive equipment. Makes proper classification determinations as it pertains to U.S. Government property. Assists Shops as needed with Troubleshooting processes. Uses proper Test Measurement and Diagnostics Equipment (TMDE) in the daily operations phase. Conducts Actual Cost of Damages (ACOD), Estimated Cost of Damages (ECOD), and Estimated Cost of Repairs (ECOR). Conduct Tests on Serviced, Repaired and Overhauled equipment to ensure operating efficiency before returning to customer. Understands the automotive repair shop equipment and functions in order to provide assistance and coverage whenever needed. Perform technical research and ensure operational readiness of assigned equipment.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <em> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span></em> </p> <ul> <li>Perform initial, in-progress, classification and final inspections.</li> <li>Utilize Global Combat Support System-Army (GCSS-A), DOD CAC access required. </li> <li>Operate and inspect equipment to diagnose and troubleshoot defects.</li> <li>Use technical manuals, bulletins and written directives in the performance of all inspections.</li> <li>Examine parts for damage or excessive wear using micrometers and gauges.</li> <li>Order required repair parts using appropriate military or COTS technical manuals.</li> <li>Perform battlefield damage assessment and repair (BDAR).</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>MINIMUM QUALIFICATIONS:</strong> </li> <li> <strong>Education/Certifications:</strong> One year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>High School Graduate or equivalent.</li> <li>Requires civilian trade qualification or US Army/Air Force/USMC Wheel Mechanic or equivalent (DD214 required).</li> <li>A valid US Driver s License and the ability to obtain a U.S. Government Motor Vehicle Operator s License and Kuwait Driver s License are required.</li> </ul> </li> <li> <strong>Experience:</strong> <br> <ul> <li>A minimum of Five (5) years experience in Automotive Repair, Shop operations or equivalent combination of education and experience is required.</li> <li>A minimum of two (2) years experience as a Technical Inspector is required.</li> </ul> </li> <li> <strong>Skills:</strong> <br> <ul> <li>Must possess the technical skills to identify different repair requirements as it pertains to Automotive Equipment.</li> <li>Must have expert knowledge of Technical and Commercial manuals for Servicing, Operational and Repair so that the correct procedures are used on the proper equipment.</li> <li>Must be an expert in Corrective Actions performed by the Maintenance Teams and only ensure that equipment is FMC when cleared by the shops</li> <li>Must have full knowledge of TMDE and its proper usage.</li> <li>Must be proficient in how the repair parts system works and what to do when it doesn t work correctly.</li> <li>Must be proficient in all phases of the paperwork that pertains to the Services, maintenance, repairs, classification and etc.</li> <li>Must have expert knowledge of the maintenance prints so as to be able to establish workload priority.</li> <li>Must have expert knowledge of Load Test procedures and processes.</li> <li>Must have expert knowledge of equipment operations as it is critical to working as a master driver for that shop.</li> <li>Ability to inspect check and test all types of automotive equipment.</li> <li>Must have a working knowledge of the Army Corrosion Prevention program.</li> <li>Must be Knowledgeable of the Army Maintenance Management Systems (TAMMS)</li> </ul> </li> <li> <strong>Physical Requirements</strong> <br> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> </ul> </li> <li> <strong>Working Conditions</strong> <br> <ul> <li>The worker is subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.</li> <li>The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.</li> </ul> </li> </ul> <p> </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication:</b></p><ul><li>Ability to communicate effectively verbally and in writing.</li><li>Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Professional Abilities and Skills:</b></p><ul><li>Familiarity with safety and quality standards.</li><li>Good knowledge of production processes and food safety.</li><li>Optimal interaction with company members and mastering work while preserving company property and its secrets.</li><li>Ability to work under pressure.</li><li>Good knowledge of mechanical systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to conduct technical analyses.</li></ul><p><b>Languages:</b></p><p>• Ability to communicate in Arabic or English, at least at a conversational level.</p><p><b>Personal Skills:</b></p><ul><li>Flexibility in work.</li><li>Responsibility and building trust with others.</li><li>Teamwork skills.</li><li>Knowledge of labor laws.</li><li>Punctuality.</li><li>Accuracy and focus.</li><li>Job competencies.</li><li>Required competency rating.</li></ul><p><br></p><p><b>Tasks and Responsibilities</b></p><ul><li>Inspect machinery and equipment according to maintenance plans established by management.</li><li>Clean machinery, equipment, and work areas and follow all instructions issued by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Conduct routine inspections and preventive maintenance of mechanical machinery and equipment.</li><li>Coordinate with the direct supervisor to ensure the availability of required spare parts.</li><li>Apply all workplace health and safety principles and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in maintenance and repair activities.</li><li>Perform maintenance and repairs on mechanical machinery and equipment according to the instructions of the direct supervisor.</li><li>Assist with the installation and commissioning of new mechanical equipment.</li><li>Prepare technical reports on the condition and performance of mechanical equipment.</li><li>Train and guide junior workers on basic mechanical maintenance activities.</li><li>Participate in developing and improving preventive maintenance plans for mechanical equipment.</li><li>Maintain professional ethics and prioritize the company's interests in all activities.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p><b>Required Skills &amp; Competencies</b></p><ul><li>Good knowledge of mechanical equipment systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to perform basic technical analysis and identify mechanical issues.</li><li>Good understanding of production processes and food safety requirements.</li><li>Knowledge of workplace safety and quality standards.</li><li>Ability to work effectively under pressure.</li><li>Strong attention to detail and accuracy.</li><li>Good teamwork and communication skills.</li><li>Flexible and responsible approach to work.</li><li>Punctual, reliable, and accountable.</li><li>Ability to maintain company property and confidentiality.</li><li>Good interpersonal and professional skills.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Qualifications:</b></p><ul><li>Technical Diploma in Mechanics or equivalent.</li><li>High School Diploma with practical experience.</li></ul><p><b>Experience:</b></p><ul><li>Fresh Graduate.</li><li>3 years experience.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for inspecting, maintaining, troubleshooting, and repairing mechanical equipment and machinery to ensure safe, reliable, and efficient operation. The role supports preventive maintenance activities, equipment installation, technical analysis, spare parts coordination, and compliance with safety and quality standards.</p><p>Key Responsibilities</p><ul><li>Inspect machinery and equipment according to maintenance plans established by management.</li><li>Clean machinery, equipment, and work areas and follow all instructions issued by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Conduct routine inspections and preventive maintenance of mechanical machinery and equipment.</li><li>Coordinate with the direct supervisor to ensure the availability of required spare parts.</li><li>Apply all workplace health and safety principles and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in maintenance and repair activities.</li><li>Perform maintenance and repairs on mechanical machinery and equipment according to the instructions of the direct supervisor.</li><li>Assist with the installation and commissioning of new mechanical equipment.</li><li>Prepare technical reports on the condition and performance of mechanical equipment.</li><li>Train and guide junior workers on basic mechanical maintenance activities.</li><li>Participate in developing and improving preventive maintenance plans for mechanical equipment.</li><li>Maintain professional ethics and prioritize the company's interests in all activities.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Good knowledge of mechanical equipment systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to perform basic technical analysis and identify mechanical issues.</li><li>Good understanding of production processes and food safety requirements.</li><li>Knowledge of workplace safety and quality standards.</li><li>Ability to work effectively under pressure.</li><li>Strong attention to detail and accuracy.</li><li>Good teamwork and communication skills.</li><li>Flexible and responsible approach to work.</li><li>Punctual, reliable, and accountable.</li><li>Ability to maintain company property and confidentiality.</li><li>Good interpersonal and professional skills.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Qualifications:</b></p><ul><li>Technical Diploma in Mechanics or equivalent.</li><li>High School Diploma with practical experience.</li></ul><p><b>Experience:</b></p><ul><li>Fresh Graduate.</li><li>3 years experience.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>1.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Organize and administer the Maintenance Department, ensuring that effective work control and productivity are maintained, whilst using every means to increase productivity and reduce costs.</span></p> <p><span><span>2.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Direct and supervise the implementation of an effective trouble report system, together with other day-to-day works of general maintenance and repair to ensure that the building, its contents and its surroundings are at all times in first-class condition throughout</span></p> <p><span><span>3.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Identify and arrange for all necessary work to maintain a high standard whether mechanical, electrical or civil, to be completed in a timely manner.</span></p> <p><span><span>4.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Ensure that a full preventive maintenance schedule exists for every item of mechanical and electrical plant or equipment,</span></p> <p><span><span>5.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Negotiate terms and conditions for all manufactures / agents and service contracts with the assistance of the controller.</span></p> <p><span><span>6.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Keep up-to-date records of all test certificates / licenses</span></p> <p><span><span>7.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Conduct frequent meetings with other Department Heads to review the current performance of their equipment.</span></p> <p><span><span>8.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Participate in assessing the long-term requirements of the Mall, including overhaul / rehabilitation programs or renewal / replacement works, etc. In conjunction with TMM General Manager – Maintenance.</span></p> <p><span><span>9.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Responsible for budgeting and financial planning for the Maintenance Department</span></p> <p><span><span>10.<span>&nbsp; </span></span></span><span>Perform other related duties as assigned or requested</span></p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 7+ years </div> </div>