وظائف مهندس ميكانيكا معدات ثقيلة

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Rig Liaisonman acts as the primary link between the drilling rig site, the Drilling &amp; Technical Department (DTD), Saudi Aramco representatives, and the contractor.<br> The position is responsible for coordinating rig activities, monitoring operational performance, ensuring compliance with approved drilling programs and Saudi Aramco requirements, and facilitating timely communication and resolution of operational issues.<br> Key Responsibilities Serve as the main liaison between the rig site, DTD, Saudi Aramco representatives, and drilling contractors.<br> Coordinate daily drilling and rig-related activities with relevant departments and stakeholders.<br> Monitor rig operations to ensure compliance with approved drilling programs, procedures, safety standards, and client requirements.<br> Review and communicate daily drilling reports, operational updates, equipment status, and performance information.<br> Follow up on rig activities, operational challenges, equipment issues, and required corrective actions.<br> Coordinate with drilling engineers, rig management, wellsite supervisors, service companies, and other stakeholders.<br> Escalate operational, technical, safety, and schedule-related issues to the appropriate DTD personnel.<br> Assist in ensuring that drilling operations remain aligned with the approved program and project schedule.<br> Track the status of rig moves, rig readiness, equipment availability, maintenance requirements, and operational priorities.<br> Support coordination of logistics, materials, personnel, services, and other resources required for rig operations.<br> Participate in meetings, operational reviews, coordination meetings, and incident investigations when required.<br> Maintain accurate records and provide regular updates to DTD management.<br> Bachelor’s degree or diploma in Drilling Engineering, Petroleum Engineering, Mechanical Engineering, or a related discipline ; or equivalent relevant experience.<br> Typically 8–15 years of experience in drilling and rig operations , preferably in the oil and gas industry.<br> Previous experience working with Saudi Aramco operations or Saudi Aramco-approved contractors is highly preferred.<br> Strong knowledge of land rig operations, drilling activities, wellsite coordination, and oilfield services.<br> Experience liaising with drilling contractors, service companies, client representatives, and technical departments.<br> Familiarity with Saudi Aramco safety, operational, and reporting requirements.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Electrical Supervisor</b> in <b>Kuwait</b>. Our client is a reputed organization in the industrial maintenance sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise electrical maintenance activities for cranes and lifting equipment.<br></li><li>Plan and execute preventive and corrective maintenance.<br></li><li>Diagnose electrical faults and ensure timely repairs.<br></li><li>Ensure compliance with electrical safety standards and procedures.<br></li><li>Coordinate maintenance schedules with operations teams.<br></li><li>Maintain maintenance records and equipment documentation.<br></li><li>Guide and supervise technicians during maintenance activities.<br></li><li>Ensure maximum equipment uptime and operational efficiency.<br></li></ul>Required Skills<br><ul><li><b>Electrical Maintenance</b> – Industrial electrical troubleshooting and repair.<br></li><li><b>Crane Maintenance</b> – Experience with crane electrical systems.<br></li><li><b>Lifting Equipment Maintenance</b> – Inspection and maintenance knowledge.<br></li><li><b>Preventive Maintenance</b> – Planning and execution of PM schedules.<br></li><li><b>Safety Compliance</b> – Knowledge of industrial electrical safety standards.<br></li></ul>Preferred Skills<br><ul><li>PLC troubleshooting<br></li><li>GCC/Kuwait maintenance experience<br></li><li>Team leadership and reporting<br></li></ul>Work Experience Requirements<br><p>Candidates should have a <b>minimum of 5 years</b> of relevant experience in electrical maintenance, specifically involving cranes and lifting equipment. Experience in industrial plants, construction, or heavy engineering environments is preferred.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma in Electrical Engineering<br></li><li><b>Preferred:</b> Bachelor's Degree in Electrical Engineering<br></li><li><b>Additional:</b> Electrical Safety or Crane Maintenance Certifications (if available)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>All candidates shall possess the required technical competence, relevant qualifications, and practical experience to perform their assigned duties efficiently.</p><p><br></p><ol><li>OO Experience in Operation and Maintenance of Sewage Pumping Stations.</li><li>OO Minimum 3 years</li></ol><p><br></p><p><br></p><p>/ REQUIRED POSITIONS /</p><p><br></p><ol><li>OO Electrical Engineer</li><li>OO Mechanical Engineer</li><li>OO Instrumentation Engineer</li><li>OO Safety Engineer</li><li>OO Scada Operator</li><li>OO Lift Operator</li><li>OO AC Technician</li><li>OO Pumping Station Operator</li><li>OO Electrician </li><li> OO Mechanic</li><li> OO Rotating Mechanic</li><li> OO Mechanical Technician</li><li> OO Electrical Technician</li><li> OO HVAC / Chiller Technician</li><li> OO Plumber</li><li>. OO Labour</li><li>. OO Helper (Mechanical)</li><li>. OO Labour / Helper (HVAC)</li><li>. OO Instrumentation Technician</li></ol><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>As mentioned </p></div>

<p>About the Role: We are seeking an experienced and hands-on Site Supervisor to oversee daily marine construction activities including dredging, piling, rock filling, quay wall construction, and subsea pipeline support works. The ideal candidate will have strong supervisory skills, practical knowledge of marine operations, and the ability to manage site crews, equipment, and subcontractors to ensure safe and efficient project execution. Key Responsibilities: • Supervise daily marine construction activities including dredging, piling, rock dumping, quay wall construction, and pipeline support works • Manage site crews including foremen, operators, riggers, and general workers; assign tasks and monitor productivity • Ensure all activities comply with approved method statements, drawings, specifications, and safety standards • Coordinate with project engineers, superintendents, and subcontractors for smooth execution of marine works • Monitor marine plant and equipment including barges, excavators, cranes, tugs, and dredgers • Conduct daily pre-start inspections of equipment and ensure all machinery is in safe working condition • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Monitor material deliveries including rock, aggregates, concrete, and steel; ensure proper handling and storage • Maintain accurate daily records including work progress, manpower, equipment usage, and materials consumed • Report delays, incidents, or technical issues to the Construction Manager or Project Engineer • Liaise with survey teams for positioning, bathymetry, and as-built verification • Ensure vessels and barges are properly moored, secured, and compliant with safety regulations • Coordinate with marine coordinators for vessel movements and logistics • Conduct quality inspections to ensure work meets project specifications • Participate in daily progress meetings and provide input on construction sequences • Mentor and guide junior staff and crew members • Ensure site housekeeping and organization at all times • Assist in preparing daily and weekly progress reports for project management</p><p>Qualifications & Experience: • Diploma or certificate in Civil Engineering, Marine Engineering, Nautical Science, or related field • Minimum 5-7 years of experience as a Site Supervisor in marine construction, dredging, or offshore projects • Strong knowledge of marine construction methods including piling, dredging, rock filling, concrete works, and subsea operations • Experience with marine equipment including barges, excavators, cranes, dredgers, and tugs • Understanding of safety regulations including SOLAS, MARPOL, and local marine requirements • Valid offshore safety certifications (BOSIET/HUET) preferred if working offshore • Familiarity with permit-to-work systems and risk assessment procedures • Proficiency in MS Office; knowledge of planning software is an advantage • Fluency in English; knowledge of Hindi/Urdu or Arabic is a plus • Valid driver's license is preferred Required Skills: • Strong leadership and team management abilities • Effective communication and coordination skills • Problem-solving for operational and technical issues • Attention to detail for quality and safety compliance • Ability to work under pressure and meet deadlines • Physical fitness for on-site work in marine environments • Ability to read and interpret construction drawings and specifications</p>

<p><strong>Job Overview</strong> Weatherford is seeking a skilled and results-driven Field Specialist IV MPD to join our team. This pivotal role is responsible for optimizing MPD and drilling processes, enhancing efficiency, and driving profitability. The ideal candidate will work closely with country and regional team to ensure accurate reporting and compliance. Additionally, this role plays a key part in conducting Operations safely and with minimal interruption to drilling. The job requires occasional package preparation in the Weatherford base where full compliance to Weatherford performance standards is required.</p><p><strong>Responsibilities:</strong> Conducts maintenance of the Managed Pressure Drilling Services equipment at the job site and workshop when required. Responsible for managing all aspects of the field/offshore Directly responsible for the safe delivery of all MPD related services onsite. On call 24hrs while on site. Responsible for daily MPD reporting, hydraulic calculations, simulations and supervises shift personnel. At the discretion of product line management (such as the Engineering Manager, Operations Manager, or their designee) will be responsible for working in the shop. This will include but not limited to green tagging, preparing, and/or assisting with shipping equipment to job site. Rig up, operate and perform troubleshooting of the Managed Pressure Drilling Services equipment at the job site or workshop, ensure all paperwork and HSE requirements are met and complied with Perform green tagging, In Casing Test, or other operational activities required on location or in the shop and all documented procedures for the Managed Pressure Drilling Services equipment on location. Perform all RCD operations and monitoring. Performs field operations of Managed Pressure Drilling Services equipment including operating the MPD Choke from the Operator s Panel Troubleshoot all electrical/electronic components and repair/maintain chokes and other mechanical equipment as necessary. Completes all the necessary reports/paperwork related to Managed Pressure Drilling Services operations. Keeps updated on all inspection requirements for the Managed Pressure Drilling Services equipment on the job site and in the shop. Demonstrate and apply knowledge and understanding of all matters related to the Managed Pressure Drilling Services equipment and accessories. Provides onsite job support to include but not limited to: mechanical, hydraulic functionality, revision changes, compatibility issues, troubleshooting, system versions, of Managed Pressure Drilling Services components. Keep updated on Managed Pressure Drilling Services equipment, mechanical and hydraulic equipment manufacturing or regulatory standards. Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions Comply with Weatherford and client Quality, Health, Security and Environment (QHSE) procedures and documentation on site for specific shift. Document all jobs and incidents in the Weatherford Performance Tracking System (WPTS). Participate in the Permit to Work process. Actively participate in ToolBox talks. Must understand and comply with all safety rules and company policies of Weatherford Required to complete the competency and training requirements identified by Global and Regional Management. Complete training in order to meet the minimum HSE certification and technical requirements required perform their jobs Perform all duties regarding Managed Pressure Drilling Services and Weatherford assigned by management or supervisors within the physical demand of the job description.</p><p><strong>Skills</strong> Mechanical ability necessary to perform repairs Excellent Microsoft Outlook, Word and Excel computer skills Self-motivator, self-starter Good oral and written communication skills Must be able to follow instructions Able to work closely with fellow employees Customer focused. General understanding of products and their application. Individual must be adaptive to change, have multi-tasking ability. Ability to work in a team environment. Ability to work in high and cold temperature environment Should be able to work closely with all levels of personnel and outside contractors.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications:</strong> +5 years related to MPD field experience Bachelor's degree Strong MPD knowledge #LI-MD1</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Join our dynamic team as a Production Engineer in the fast-paced FMCG sector in Kuwait. This role is responsible for overseeing and following up with UBC production processes whilst ensuring production processes meet industry standards for safety, efficiency, and quality, while collaborating closely with the Production, Quality Control, and Maintenance Teams.</p><p><br></p><p><b>Responsibilities:</b></p><p><br></p><ul><li>Monitor production line operations to ensure optimal efficiency and address any operational issues that may arise.</li><li>Assist in developing production schedules based on demand forecasts, available capacity, and materials availability, ensuring efficient utilization of resources and meeting production goals. </li><li>Identify, diagnose, and resolve mechanical and electrical problems quickly to minimize downtime and maintain smooth production flow.</li><li>Coordinate with the Warehouse and Procurement Departments to manage materials, including inventory control, procurement, and material requirement planning (MRP).</li><li>Implement a regular calibration schedule for equipment, including temperature sensors, pressure gauges, flow meters, and other critical instruments, ensuring adherence to manufacturer specifications and regulatory requirements.</li><li>Follow up with the Maintenance and Calibration Team to ensure all maintenance and calibration schedules are adhered to and that equipment is properly maintained</li><li>Analyze current processes and implement improvements that increase productivity, reduce waste, and enhance overall plant performance.</li><li>Work closely with production teams to ensure seamless coordination and communication, facilitating uninterrupted operations. </li><li>Perform ad-hoc and other duties related to the job as assigned by the Direct Manager.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's Degree in Industrial, Mechanical Engineering or any other related field.</li><li>Experience in production management within the food and beverage industry or a related field.</li><li>Strong analytical skills to assess production processes and identify areas for improvement.</li><li>Proficiency in production planning and process optimization techniques.</li><li>Familiarity with quality control standards and practices in the FMCG industry.</li><li>Excellent communication skills to collaborate effectively with cross-functional teams.</li><li>Knowledge of safety regulations and best practices in a production environment.</li><li>Ability to adapt to new technologies and tools in production engineering.</li></ul></div>

YOUR DAY-TO-DAY<br><br>Greet all guests, visitors, and VIPs warmly and professionally as they arrive or depart the hotel. Open doors, assist with luggage, and provide direction or escort to the reception or appropriate areas. Coordinate with Bellmen and the Front Office team to manage guest arrivals and departures efficiently. Assist with hailing taxis, arranging transportation, and directing traffic in front of the hotel to ensure smooth flow. Provide information on hotel facilities, services, and local attractions with confidence and accuracy. Maintain a strong presence at the main entrance, upholding the hotel’s image and security protocols at all times. Monitor and manage the cleanliness and appearance of the entrance, driveway, and lobby areas. Anticipate guest needs and respond promptly to guest requests, inquiries, or concerns. Assist with handling packages, deliveries, and special guest arrangements as needed. Support the Front Office and Concierge teams during busy periods with a proactive, can-do attitude. Maintain detailed knowledge of hotel events, VIP arrivals, and guest preferences.<br><br>RESPONSIBLE BUSINESS<br><br>Assist with heavy packages, coats, suitcase, etc. being alert to give assistance courteously and quickly, before having to be asked Maintain a willingness to please attitude and give undivided attention to any approaching guest Be familiar with the layout of the hotel and memorize the preferred route for escorting guests Room the guest in accordance with hotel standards Be familiar with the lift workings and emergency stairs. Provide information to guests about the hotel facilities and services Keep the lobby clean and tidy, informing the Concierge or Bell Captain if it needs major cleaning Maintain a well-groomed hair style and wear clean, shiny well-polished shoes and a neat uniform while on duty Keep the baggage room clean and in order before going off duty on each shift Upon arrival of newspaper, prepare them and deliver them to guest rooms as assigned by the Bell Captain Use the Duty Log to document matters of importance Operate Communicates equipment Arrange transport and coordinate luggage Manage the key system securely.<br><br>ACCOUNTABILITY<br><br>Demonstrate service attributes in accordance with industry expectations and company standards including:<br><br>Being attentive to Guests Accurately and promptly fulfilling Guests requests Anticipate Guests needs Maintain a high level of knowledge which affects the Guest experience Demonstrating a „service‟ attitude Taking appropriate action to resolve guest complaints Appreciate the dynamic nature of the Hotel industry and extend these service attributes to all internal customers<br><br>Don't quite meet every single requirement, but still believe you'd be a great fit for the job? We'll never know unless you hit the 'Apply' button. Start your journey with us today.

<strong>Overview</strong> <br> <br> <p> <strong>**This position will be physically located in Kuwait**</strong> </p> <p> </p> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <p> </p> <p>The Inventory Control &amp; BII Specialist is responsible for maintaining 100% physical accountability of all Basic Issue Items (BII) and Components of End Item (COEI) across APS-5 equipment sets. This position ensures vehicle gear layouts match the exact property book and authorized technical manual requirements. The role also validates tactical digital communications systems, including SINCGARS/Harris radios, JCR, and BFT, and performs diagnostics using TMDE to isolate electronic node faults to the Line Replaceable Unit (LRU) level. The specialist ensures APS-5 equipment readiness, accuracy of component listings, and compliance with Army regulations and APS-5 SOPs.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong> <em> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span></em> </strong> </p> <ul> <li> <p>Perform full, partial, and cyclic inventories of BII, COEI, and AAL components for all APS-5 equipment. </p> </li> <li> <p>Responsible for 100% physical component count of all BII/COEI items.</p> </li> <li> <p>Ensure vehicle gear layouts match the exact authorized property book configuration and technical manual (TM) layout.</p> </li> <li> <p>Identify missing, damaged, incorrect, or substituted BII/COEI items and record all discrepancies.</p> </li> <li> <p>Maintain accurate inventory records within AWRDS, GCSS-Army, DPAS, and component tracking systems.</p> </li> <li> <p>Prepare shortage annexes, discrepancy worksheets, and reconciliation documentation.</p> </li> <li> <p>Ensure BII/COEI items are properly labeled, packaged, stored, and secured according to TMs and APS-5 SOPs. </p> </li> <li> <p>Support equipment issue, turn-in, and reset operations with complete BII/COEI validation. </p> </li> <li> <p>This position does not inspect engines, driveline systems, hydraulics, or vehicle mechanical readiness. </p> </li> <li> <p>Responsibilities focus solely on BII/COEI component accuracy, layout validation, and tactical digital systems.</p> </li> <li> <p>Validate vehicle-integrated tactical communications systems including SINCGARS/Harris radios, Joint Capabilities Release (JCR), and Blue Force Tracker (BFT).</p> </li> <li> <p>Perform functional checks on digital data buses, interface modules, and communication harnesses.</p> </li> <li> <p>Use TMDE to isolate faults in electronic nodes, data harnesses, and interface kits.</p> </li> <li> <p>Identify faults down to the Line Replaceable Unit (LRU) level.</p> </li> <li> <p>Ensure all tactical systems are installed/configured according to technical manuals and APS-5 configuration control standards.</p> </li> <li> <p>Maintain audit-ready logs of all diagnostics, validations, and corrective actions.</p> </li> <li> <p>Coordinate with Maintenance, Communication Shop, and Materiel Management for LRU replacements or system corrections.</p> </li> <li> <p>Maintain audit-ready documentation for inventories, tactical system checks, and reconciliation actions.</p> </li> <li> <p>Generate daily, weekly, and monthly inventory and tactical system status reports.</p> </li> <li> <p>Ensure compliance with APS-5 SOPs, Army regulations, and government contractual requirements.</p> </li> <li> <p>This job description is not intended to be all-inclusive. Management may assign additional duties to support APS-5 mission requirements.</p> <p> </p> </li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Minimum Qualifications: Education/Certifications</strong>: One year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>High school diploma or equivalent; associate degree preferred.</li> <li>Must be able to obtain a Host Country Driver's License</li> <li>Must be CAC eligible and/or the ability to obtain a CAC</li> </ul> </li> <li> <strong>Experience:</strong> <br> <ul> <li>APS-5 experience in inventory, BII/COEI management, or Army supply operations.</li> <li>Familiarity with SINCGARS/Harris/JCR/BFT systems and basic TMDE diagnostics.</li> <li>Proficiency with AWRDS, GCSS-Army, DPAS, and technical manual interpretation.</li> <li>Environmental Regulations, including Federal OSHA and EPA regulations.</li> <li>Military background and training beneficial.</li> </ul> </li> <li> <strong>Skills:</strong> <br> <ul> <li>Ability to instruct small and medium groups of people, Competent in computer operations to include Microsoft Office; Outlook, Word, Excel, and PowerPoint.</li> <li>Must have a strong ability to work independently.</li> <li>Strong analytical skills, attention to detail, and organizational abilities.</li> </ul> </li> <li> <strong>Working Conditions:</strong> <br> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <br> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> <p> </p>

<p>We are seeking an experienced Senior Technician to join our team in Kuwait, specializing in the maintenance, repair, and installation of commercial kitchen equipment. This role requires a highly skilled individual who can ensure optimal functionality of all kitchen systems, support junior technicians, and contribute to excellent customer satisfaction. Responsibilities: - Perform routine maintenance, diagnostics, and repairs on a variety of commercial kitchen appliances and equipment. - Lead troubleshooting efforts to identify and resolve technical issues efficiently and effectively. - Install and commission new commercial kitchen equipment following manufacturer guidelines and safety standards. - Train and mentor junior technicians to enhance team skills and performance. - Collaborate with customers to understand equipment issues and provide professional service and advice. - Maintain accurate service records and report on work completed and parts used. - Ensure compliance with health and safety regulations during all service activities.</p><p>- Proven experience as a technician in the commercial kitchen equipment industry or equivalent technical field. - Strong knowledge of commercial kitchen appliances including ovens, refrigerators, dishwashers, and ventilation systems. - Excellent problem-solving skills with a methodical and detail-oriented approach to diagnostics and repair. - Ability to work independently and lead small teams effectively. - Good communication and interpersonal skills to engage with clients professionally. - Flexibility to handle emergency call-outs and work extended hours when needed. - Relevant technical certifications or diploma in electrical or mechanical engineering is preferred. - Fluency in English; knowledge of Arabic is an advantage.</p>

<p>We are seeking an experienced Senior Technician to join our team in Kuwait, specializing in the maintenance, repair, and installation of commercial kitchen equipment. This role requires a highly skilled individual who can ensure optimal functionality of all kitchen systems, support junior technicians, and contribute to excellent customer satisfaction. Responsibilities: - Perform routine maintenance, diagnostics, and repairs on a variety of commercial kitchen appliances and equipment. - Lead troubleshooting efforts to identify and resolve technical issues efficiently and effectively. - Install and commission new commercial kitchen equipment following manufacturer guidelines and safety standards. - Train and mentor junior technicians to enhance team skills and performance. - Collaborate with customers to understand equipment issues and provide professional service and advice. - Maintain accurate service records and report on work completed and parts used. - Ensure compliance with health and safety regulations during all service activities.</p><p>- Proven experience as a technician in the commercial kitchen equipment industry or equivalent technical field. - Strong knowledge of commercial kitchen appliances including ovens, refrigerators, dishwashers, and ventilation systems. - Excellent problem-solving skills with a methodical and detail-oriented approach to diagnostics and repair. - Ability to work independently and lead small teams effectively. - Good communication and interpersonal skills to engage with clients professionally. - Flexibility to handle emergency call-outs and work extended hours when needed. - Relevant technical certifications or diploma in electrical or mechanical engineering is preferred. - Fluency in English; knowledge of Arabic is an advantage.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. <br>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Mechanical Engineer. Supervisor - Kuwait<br><br>kuwaitAll candidates must have Oil and Gas experience and 8+ years of experience is required.&nbsp; <br><br>Gulf experience is required.<br><br>BE / Btech in Mechanical Engineer<br><br></span><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a highly skilled Senior Mechanical Engineer to join our dynamic team in the accounting sector. This role is pivotal in ensuring the seamless integration of mechanical systems within our operational framework, contributing to our goal of delivering top-notch services. As a Senior Mechanical Engineer, you will leverage your expertise to design, analyze, and improve mechanical systems that support our business objectives. This is not just a job; it’s an opportunity to make a significant impact in a collaborative environment where innovation is encouraged and valued.</p><p>In this position, you will have the chance to lead projects that drive efficiency and effectiveness across various departments. You will work closely with cross-functional teams to implement advanced mechanical solutions that enhance our service delivery and operational capabilities. We believe in fostering a culture of continuous learning, and as a Senior Mechanical Engineer, you will have access to training programs and professional development opportunities that will help you grow your skills and advance your career.</p><p>Your leadership will be crucial in mentoring junior engineers, guiding them through complex projects, and sharing your knowledge to cultivate a strong engineering team. This role offers the chance to influence the strategic direction of our mechanical engineering initiatives, ensuring that our practices align with industry standards and best practices. Join us, and be part of a forward-thinking organization that values your contributions and invests in your future.</p><p><b>Responsibilities:</b></p><ol><li>Lead the design and analysis of mechanical systems, utilizing CAD software and simulation tools to ensure optimal performance and compliance with industry standards.</li><li>Collaborate with cross-functional teams to integrate mechanical systems into existing processes, ensuring seamless operation and efficiency in service delivery.</li><li>Conduct regular assessments and maintenance of mechanical systems, implementing improvements based on performance data to enhance reliability and reduce downtime.</li><li>Mentor junior engineers and provide guidance on best practices in mechanical engineering, fostering a culture of learning and professional growth within the team.</li><li>Prepare detailed project documentation, including design specifications, reports, and presentations, to communicate project progress and outcomes to stakeholders effectively.</li><li>Stay updated on the latest mechanical engineering trends and technologies, applying this knowledge to drive innovation and improve existing systems.</li><li>Manage project timelines and budgets, ensuring that all engineering projects are completed on schedule and within financial constraints.</li><li>Evaluate and select appropriate materials and components for mechanical systems, considering factors such as cost, durability, and environmental impact.</li><li>Participate in safety assessments and ensure that all mechanical systems comply with health and safety regulations, promoting a safe working environment for all employees.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficiency in CAD software and mechanical design tools, enabling effective system modeling and analysis.</li><li>Strong analytical skills to assess mechanical systems and identify areas for improvement.</li><li>Excellent project management abilities to oversee engineering projects from conception to completion.</li><li>Leadership and mentoring skills to guide junior engineers and foster team collaboration.</li><li>Knowledge of industry regulations and standards to ensure compliance in engineering practices.</li><li>Effective communication skills for presenting complex technical information to non-technical stakeholders.</li><li>Adaptability to new technologies and methodologies, ensuring the continuous improvement of engineering processes.</li></ul></div>

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Plan, conduct, and supervise aircraft technical inspections. Compute basic weight and balance records. Participate in maintenance test flights and operation checks as required. Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration. Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies. Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li><li>Completion of high school or equivalent required. Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li></ul><h2>Knowledge &amp; Skills</h2><ul><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li></ul><h2>Physical Requirements/Working Environment</h2><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty.</p><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components.</p><p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p><p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals.</p><p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p><p>Plan, conduct, and supervise aircraft technical inspections.</p><p>Compute basic weight and balance records.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration.</p><p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies.</p><p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities.</p><p>Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li><li>Completion of high school or equivalent required.</li><li>Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li></ul><h3>Knowledge &amp; Skills</h3><ul><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li></ul><h3>Physical Requirements/Working Environment</h3><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D. equivalent and vocational or technical background.<br>Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting.<br>At least 2 years of hotel engineering/maintenance experience.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>License or Certification: Valid Driver’s License<br>REQUIRED QUALIFICATIONS<br>Universal Chlorofluorocarbon (CFC) Certification<br>Must meet applicable state and federal certification and/or licensing<br>requirements.<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>The world is a big place and Marriott Executive Apartments offers temporary housing that feels like home in the biggest and best cities for business travel across Europe, Asia, Latin America, Africa and the Middle East. Join the Marriott Executive Apartments team and help our guests adapt to a new locale and feel comfortable and cared for while living away from home. In joining Marriott Executive Apartments, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials. Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required. U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>