وظائف مهندس ميكانيكا سيارات في الكويت

<p><h4>Job description</h4> <p>An assistant chief engineer is responsible for all maintenance issues within the hotel to deliver an excellent guest and member experience while performing daily checks, repairing equipment, and coordinating renovation projects.</p> <h4>What will I be doing?</h4> <p>As an assistant chief engineer, you will be responsible for all maintenance issues within the hotel, daily maintenance checks, and repairing mechanical equipment to deliver an excellent guest and member experience. An assistant chief engineer will also be required to coordinate renovation projects and develop emergency programs. Specifically, you will be responsible for performing the following tasks to the highest standards:</p> <ul> <li>Responsible for maintenance issues within the hotel</li> <li>Perform daily checks around the hotel</li> <li>Conduct lift emergency release procedures as required</li> <li>Diagnose, maintain, and repair mechanical equipment within the hotel</li> <li>Ensure good relationships are built with internal and external customers</li> <li>Maintenance of all hotel fixtures and fittings to ensure they are in safe condition and take action when any unsafe situations arise</li> <li>Develop, implement, and direct all emergency programs</li> <li>Develop, implement and manage energy conservation programs for the property to minimize expenses</li> <li>Coordinate renovation bidding, define the cost and scope of the project, and oversee the general contractor and subcontractors to ensure quality work is performed cost effectively</li> <li>Perform special projects and other responsibilities as assigned</li> <li>Responsible for the health and safety of the hotel</li> <li>Ensure monthly safety inspections take place and employees are trained accordingly</li> </ul> <h4>What are we looking for?</h4> <p>An assistant chief engineer serving Hilton brands is always working on behalf of our guests and working with other team members. To successfully fill this role, you should maintain the attitude, behaviours, skills, and values that follow:</p> <ul> <li>Advanced knowledge of building management/engineering</li> <li>Positive attitude</li> <li>Good communication skills</li> <li>Committed to delivering a high level of customer service</li> <li>Excellent grooming standards</li> <li>Flexibility to respond to a range of different work situations</li> <li>Ability to work under pressure</li> <li>Ability to work on their own</li> <li>Previous experience in a management role</li> </ul> <p>It would be advantageous in this position for you to demonstrate the following capabilities and distinctions:</p> <ul> <li>First aid</li> <li>Vocational training in engineering or similar field</li> </ul> <h4>What will it be like to work for Hilton?</h4> <p>Hilton is the leading global hospitality company, spanning the lodging sector from luxurious full-service hotels and resorts to extended-stay suites and mid-priced hotels. For nearly a century, Hilton has offered business and leisure travelers the finest in accommodations, service, amenities and value. Hilton is dedicated to continuing its tradition of providing exceptional guest experiences across its global brands. Our</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Develop and execute sales strategies to meet and exceed dealership or company targets. Manage and mentor the motorcycle sales team, providing training and performance evaluations. Build strong customer relationships and ensure a premium buying experience. Monitor market trends, competitor activities, and customer feedback to adjust strategies. Collaborate with marketing teams to design promotional campaigns and events. Oversee showroom operations, ensuring motorcycles are displayed and marketed effectively. Negotiate deals with customers, ensuring profitability and customer satisfaction. Prepare regular sales reports and forecasts for senior management. Coordinate with aftersales/service departments to enhance customer loyalty.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirement open for all nationalities Minimum 5-7 years of relevant experience in Automotive Industry (Motorcycles) Should have good communications skills</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Ali Alghanim and Sons Automotive<br> <br>Job Title: Marketing Executive</b><br> <br>About the Role: We are looking for a dynamic and motivated Marketing Executive to join our team. This role is open to fresh graduates with a degree in Marketing. The ideal candidate should be analytical, detail-oriented, and comfortable working with data to support marketing strategies.<br> <b><br>Key Responsibilities:</b><br>Assist in developing and executing marketing campaigns.<br>Conduct market research and analyze data to identify trends.<br>Prepare reports and presentations using Excel and PowerPoint.<br>Support the team in day-to-day marketing activities.<br> <br><b>Requirements:</b><br>Bachelor's degree with a major in Marketing or Good experience in similar roles<br>Strong analytical skills.<br>Proficiency in Microsoft Excel and PowerPoint.<br>Excellent communication and organizational skills.<br> <b><br>Why Join Us:</b><br>Opportunity to grow in a supportive environment.<br>Exposure to diverse marketing projects.<br>Career development and training opportunities.<br></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>The team leader will be responsible to improve Customer Service Index by promptly attending customers, timely delivery and comply with FIRFT (fix it right first time), resulting in increased revenue.</p><br> <br><br>Job Responsibilities <br><p>•&nbsp;&nbsp; &nbsp;Control and monitor the jobs based on the technician ability to achieve highest productivity and customer satisfaction and lowest comeback jobs. Ensure each job is completed within the promised delivery time.<br> •&nbsp;&nbsp; &nbsp;Open job card and process job card.&nbsp;<br> •&nbsp;&nbsp; &nbsp;Evaluate and monitor performance of the technicians against set standards, identify and ask for necessary training or coaching support. , keep them motivated and to improve efficiency and productivity.<br> •&nbsp;&nbsp; &nbsp;Diagnose technical problems with and without diagnostic tools.<br> •&nbsp;&nbsp; &nbsp;Quality checks and road testing of vehicles.<br> •&nbsp;&nbsp; &nbsp;Clear basics and concepts of automotive service technique<br> •&nbsp;&nbsp; &nbsp;Ensure that company’s health safety policies are followed, all tools equipments are kept in good order, and house keeping standard are maintained so as to preserve a good safe and healthy working environment</p><br> <br><br>Candidate Requirements <br><p>•&nbsp;&nbsp; &nbsp;3-5 years of working experience in dealership.<br> •&nbsp;&nbsp; &nbsp;Good command of both English and Arabic.<br> •&nbsp;&nbsp; &nbsp;Good working knowledge of MS Office applications<br> •&nbsp;&nbsp; &nbsp;Computer Literate<br> •&nbsp;&nbsp; &nbsp;Team player can work under pressure</p><br> <br><br>Education <br>Diploma in Automobile Engineering<br><br><br><br> </div>

<ul><li>Thoroughly clean and detail vehicles, ensuring every surface is immaculate from the exterior to the interior.</li><li>Use specialized cleaning products and techniques to effectively remove dirt, grime, and stains without damaging surfaces.</li><li>Perform waxing and polishing to enhance the vehicle's shine and protect the paintwork from environmental elements.</li><li>Inspect vehicles for any damage or maintenance needs while cleaning, reporting issues to management promptly.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent, showcasing basic educational background essential for understanding instructions.</li><li>1-2 years of experience in automotive detailing or car washing, highlighting hands-on expertise in the field.</li><li>Certification in automotive detailing or related fields preferred for a demonstrated commitment to quality work.</li><li>Experience in a fast-paced environment, enabling candidates to thrive under pressure while delivering excellent service.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Title: Civil Engineer – KWT (Bilingual) Job Code: Civil Engineer – KWT (Bilingual) Company: Zaleej Real Estate Company (KSCC) Department: Project Management Reports To: CEO ABOUT US Zaleej Real Estate Company (KSCC) is the Kuwait real estate company that manages a diversified portfolio of commercial and residential properties across Kuwait, combining institutional-grade asset management with hands-on operational excellence.<br> ROLE OVERVIEW The Civil Engineer provides the technical engineering backbone for Zaleej’s development projects, covering site investigation, infrastructure design, construction drawings, and on-site technical supervision across residential, commercial, and mixed-use developments in Kuwait.<br> Working alongside the Project Manager, the role owns the engineering quality and code compliance of each project — from soil reports and site plans through to as-built documentation.<br> Success in this role is measured by design quality, regulatory compliance, technical issue resolution speed, and the seamless coordination of consultants, contractors, and authorities.<br> KEY RESPONSIBILITIES Site Investigation &amp; Design Conduct comprehensive site investigations, analysing topographical surveys, soil conditions, and environmental factors to determine site suitability for development.<br> Design site infrastructure including roads, utilities, drainage systems, retaining structures, and site grading.<br> Develop detailed site plans that optimise land use while ensuring compliance with Kuwait Municipality zoning regulations and the Kuwait Engineering Code.<br> Drawings &amp; Technical Documentation Prepare and review engineering drawings, specifications, calculations, and technical documents to professional standards.<br> Review and approve contractor shop drawings, material submittals, and method statements.<br> Maintain accurate as-built drawings and technical project records throughout the construction lifecycle.<br> Construction Technical Oversight Provide on-site technical supervision to ensure construction works conform to approved drawings, specifications, and quality standards.<br> Conduct regular site inspections and resolve technical issues, design clarifications, and RFIs raised by contractors and consultants.<br> Identify and mitigate technical risks during construction, recommending value engineering opportunities where appropriate.<br> Regulatory Compliance &amp; Permitting Ensure all projects comply with Kuwait Municipality regulations, the Kuwait Engineering Code, and applicable national environmental, fire, and safety standards (EPA, MPW, Civil Defence).<br> Prepare and submit permit applications, engineering drawings, and technical reports to relevant Kuwait authorities.<br> Liaise with Municipality, MPW, EPA, Civil Defence, and utility providers (MEW) to secure required approvals.<br> Coordination &amp; Technical Support Coordinate closely with architects, MEP engineers, structural consultants, quantity surveyors, and surveyors to integrate disciplines and resolve technical clashes.<br> Support the Project Manager with engineering inputs to cost estimates, scheduling, and risk assessments.<br> Provide technical expertise to internal teams and external stakeholders to resolve construction-related challenges.<br> WHAT WE OFFER Opportunity to work on a meaningful pipeline of development projects within a principal-led, long-term investment group.<br> Hands-on technical exposure across the full project lifecycle — from site investigation through to handover.<br> A collaborative, entrepreneurial environment that values technical excellence, integrity, and continuous improvement.<br> HOW TO APPLY Apply via the online application form: https://airtable.<br>com/appwm2VUujXVQ2mIB/shrBmmYJs7pftZ2kJ Select “Civil Engineer - KWT (Bilingual)” as the job position and reference code when completing the form.<br> Alternatively, email your CV directly to hr@zaleej.<br>com with the subject line “Civil Engineer”.<br> Only shortlisted candidates will be contacted.<br> We appreciate all applications.<br> Essential (Must-Have) Bachelor’s degree in Civil Engineering from an accredited university.<br> Active membership of the Kuwait Society of Engineers (KSE), or eligibility to register within a defined timeframe.<br> Minimum 5 years’ experience in civil engineering, with a focus on real estate development or construction projects in Kuwait or the GCC.<br> Strong working knowledge of Kuwait’s building regulations, the Kuwait Engineering Code, Municipality approvals, and construction safety standards.<br> Proficiency in AutoCAD, Civil 3D, and GIS software.<br> Demonstrated experience in site planning, infrastructure design, drainage, and construction supervision.<br> Strong analytical and problem-solving skills, with attention to technical detail.<br> Bilingual fluency in English and Arabic (written and spoken) — essential for liaising with authorities, consultants, and contractors.<br> Valid Kuwait driving license and transferable Article 18 residency visa.<br> Preferred (Nice-to-Have) Master’s degree in Civil Engineering, Structural Engineering, or a related field.<br> Working knowledge of Revit, BIM workflows, and clash detection tools.<br> Experience with sustainable construction practices and green building certifications (e.<br>g. LEED, ESTIDAMA).<br> Familiarity with the real estate market in Kuwait and the wider GCC.<br> Established network of contacts within Kuwait’s consultant, contractor, and government engineering community.<br></span> </div>

<p>Company Description Kuwait Shop Factory is a specialized manufacturer of high-quality cosmetics and personal care products for skin, body, and hair. Inspired by traditional herbal remedies and enriched with natural oils, our formulations combine heritage with modern science to deliver safe, effective, and luxurious care solutions.</p><p>Chemist or chemical engineer needed for cosmetic production factory in Kuwait.</p><p>Production chemist/ Chemical engineer.</p><p>Must have experience in the field of cosmetics and personal care products.</p><p>Good in English and computer skills.</p><p>Good knowledge of water desalination system.</p><p>Bachelor's degree in Chemistry, Chemical Engineering, or related discipline.</p><p>Attention to detail, problem-solving abilities, and effective communication skills.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemistry, Chemical Engineering, or related discipline</li><li>Attention to detail, problem-solving abilities, and effective communication skills</li><li>NOTE: PREFERRED INDIAN CANDIDATES FROM INDIA TO WORK IN KUWAIT</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>Reporting to the Marketing Manager, the Marketing Executive is responsible for developing and implementing the marketing plan for the Automotive division of Alghanim Industries.</p><br> <br><br>Job Responsibilities <br><ul> <li>Develop and implement the marketing plan.</li> <li>Plan and oversee the development and execution of all marketing communication initiatives and advertising activities.</li> <li>Develop sales promotion and merchandising strategies to ensure maximum market penetration.</li> <li>Develop and implement systems to monitor competitive market position in relation to own product lines, including pricing, product features and sales strategy.</li> <li>Analyse sales results and provide recommendations.</li> <li>Participate in setting the sales and pricing strategy.</li> <li>Is responsible for showroom display and merchandising.</li> <li>Plan and conduct market research.</li> </ul> <br><br>Candidate Requirements <br><ul> <li>3-4 years in Automotive Marketing Experience, preferably with a multinational company</li> <li>Excellent communication and presentation skills.</li> <li>Proven analytical and organizational skills.</li> <li>Self motivated with strong leadership and team player skills.</li> <li>Ability to work in a fast-paced and demanding environment.</li> <li>Bilingual (English/Arabic).</li> </ul> <br><br>Education <br>Bachelor’s Degree in Business Administration<br>MBA in Business Administration<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>The Receptionist reports&nbsp;to the Showroom Manager and provides administrative support to all Central Services and Support Operations of the Automotive division of Alghanim Industries.</p><br> <br><br>Job Responsibilities <br><ul> <li>Welcomes customers and direct them to the appropriate representative</li> <li>Responsible for maintaining all files</li> <li>Arranging and coordinating the&nbsp;manager's schedule</li> <li>Coordination of all archive support for Automotive division&nbsp;</li> <li>Writing and translating all facility correspondence (Arabic and English)</li> <li>Organizing travel and hotel accommodation for all&nbsp;managerial staff</li> <li>Responsible for&nbsp;preparing employees change of status forms</li> <li>Coordinating with HR office on all personal matters relating&nbsp;showroom staff</li> </ul> <p>Handling all incoming and outgoing mail for the manager</p><br> <br><br>Candidate Requirements <br><ul> <li>Must be able to speak and write Arabic and English</li> <li>Must be self-motivating, personable, able to handle demanding customers</li> <li>Good communication skills&nbsp;</li> <li>Pleasant personality</li> <li>Presentable and professional</li> <li>Able to work on computer (Word, Excel, Internet etc.)</li> <li>Team player and punctual</li> </ul> <p>Willing to work two shifts (8:00 – 12:00 and 4:30 – 8:00)</p><br> <br><br>Education <br>High School / Diploma<br>Bachelor’s Degree<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>The Receptionist reports&nbsp;to the Showroom Manager and provides administrative support to all Central Services and Support Operations of the Automotive division of Alghanim Industries.</p><br> <br><br>Job Responsibilities <br><ul> <li>Welcomes customers and direct them to the appropriate representative</li> <li>Responsible for maintaining all files</li> <li>Arranging and coordinating the&nbsp;manager's schedule</li> <li>Coordination of all archive support for Automotive division&nbsp;</li> <li>Writing and translating all facility correspondence (Arabic and English)</li> <li>Organizing travel and hotel accommodation for all&nbsp;managerial staff</li> <li>Responsible for&nbsp;preparing employees change of status forms</li> <li>Coordinating with HR office on all personal matters relating&nbsp;showroom staff</li> </ul> <p>Handling all incoming and outgoing mail for the manager</p><br> <br><br>Candidate Requirements <br><ul> <li>Must be able to speak and write Arabic and English</li> <li>Must be self-motivating, personable, able to handle demanding customers</li> <li>Good communication skills&nbsp;</li> <li>Pleasant personality</li> <li>Presentable and professional</li> <li>Able to work on computer (Word, Excel, Internet etc.)</li> <li>Team player and punctual</li> </ul> <p>Willing to work two shifts (8:00 – 12:00 and 4:30 – 8:00)</p><br> <br><br>Education <br>High School / Diploma<br>Bachelor’s Degree<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Junior Spare Parts Sales Engineer/Executive is responsible for selling a wide range of spare parts for heavy and industrial equipment. The role involves managing and supporting existing clients, identifying new sales opportunities, and expanding the customer base. By providing timely and accurate parts solutions, the Sales Engineer contributes to customer satisfaction and long-term business growth while advancing their own sales career.</p><p>&nbsp;</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Mandatory requirements:-</p><p>&nbsp;</p><ul><li>Locally in Kuwait</li><li>Clear English/Arabic Communication skills</li><li>Mechanical Bachelors Degree&nbsp;</li><li>Experience 2 years or more experience in spare parts sales or after-sales support for heavy and industrial equipment (e.g., construction, material handling, road equipment)</li><li>Strong understanding of mechanical components and spare parts, including engines, hydraulics, filters, undercarriage parts, etc.</li><li><b>Sales Skills-</b>Proven experience in B2B sales, negotiation, and customer relationship management.</li><li><b>Computer Proficiency-</b>Familiarity with ERP systems (like SAP, Oracle, or similar), MS Office, and CRM tools for managing quotations, orders, and customer data.</li><li><b>Must have a valid Kuwait Driving License</b></li><li>Ability to understand technical issues, read part diagrams, and suggest accurate spare parts solutions.</li><li><b>Must have </b>Strong commitment to customer service and responsiveness to inquiries, orders, and after-sales support.</li></ul><p>Kindly acknowledge and confirm.</p><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Overview</strong> <br> <br> <p> <strong> <span> <span>**This position will be physically located in Kuwait in support of LOGCAP**</span> </span></strong> </p> <p> </p> <p>Under the supervision of the Material Maintenance Manager &amp; Technical Inspector Lead, performs initial, in-progress and final inspections on various types of military, commercial, and other forms of Automotive equipment. Makes proper classification determinations as it pertains to U.S. Government property. Assists Shops as needed with Troubleshooting processes. Uses proper Test Measurement and Diagnostics Equipment (TMDE) in the daily operations phase. Conducts Actual Cost of Damages (ACOD), Estimated Cost of Damages (ECOD), and Estimated Cost of Repairs (ECOR). Conduct Tests on Serviced, Repaired and Overhauled equipment to ensure operating efficiency before returning to customer. Understands the automotive repair shop equipment and functions in order to provide assistance and coverage whenever needed. Perform technical research and ensure operational readiness of assigned equipment.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong> <em> <span> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span> </span></em> </strong> </p> <ul> <li>Perform initial, in-progress, classification and final inspections.</li> <li>Utilize Global Combat Support System-Army (GCSS-A), DOD CAC access required.</li> <li>Operate and inspect equipment to diagnose and troubleshoot defects.</li> <li>Use technical manuals, bulletins and written directives in the performance of all inspections.</li> <li>Examine parts for damage or excessive wear using micrometers and gauges.</li> <li>Order required repair parts using appropriate military or COTS technical manuals.</li> <li>Perform battlefield damage assessment and repair (BDAR).</li> <li>Classifies equipment for disposal IAW Army regulations and verify equipment condition codes.</li> <li>Perform testing and certification of equipment and material during Load Testing Process.</li> <li>Perform PDQR process when receiving improper or damaged repair parts.</li> <li>Perform load testing of various equipment IAW applicable technical reference.</li> <li>Performs other duties as assigned.</li> <li>Suggests improvements to processes and have the capability of writing or rewriting process improvements as needed.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>MINIMUM QUALIFICATIONS:</strong> <ul> <li>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required.</li> <li>High School Graduate or equivalent.</li> <li>Requires civilian trade qualification or US Army/Air Force/USMC Wheel Mechanic or equivalent (DD214 required).</li> <li>A valid US Driver s License and the ability to obtain a U.S. Government Motor Vehicle Operator s License and Kuwait Driver s License are required.</li> </ul> </li> <li> <strong>Experience</strong>:<ul> <li>A minimum of Five (5) years experience in Automotive Repair, Shop operations or equivalent combination of education and experience is required.</li> <li>A minimum of two (2) years experience as a Technical Inspector is required.</li> </ul> </li> <li> <strong>Skills</strong>:<ul> <li>Must possess the technical skills to identify different repair requirements as it pertains to Automotive Equipment.</li> <li>Must have expert knowledge of Technical and Commercial manuals for Servicing, Operational and Repair so that the correct procedures are used on the proper equipment.</li> <li>Must be an expert in Corrective Actions performed by the Maintenance Teams and only ensure that equipment is FMC when cleared by the shops</li> <li>Must have full knowledge of TMDE and its proper usage.</li> <li>Must be proficient in how the repair parts system works and what to do when it doesn t work correctly.</li> <li>Must be proficient in all phases of the paperwork that pertains to the Services, maintenance, repairs, classification and etc.</li> <li>Must have expert knowledge of the maintenance prints so as to be able to establish workload priority.</li> <li>Must have expert knowledge of Load Test procedures and processes.</li> <li>Must have expert knowledge of equipment operations as it is critical to working as a master driver for that shop.</li> <li>Ability to inspect check and test all types of automotive equipment.</li> <li>Must have a working knowledge of the Army Corrosion Prevention program.</li> <li>Must be Knowledgeable of the Army Maintenance Management Systems (TAMMS)</li> </ul> </li> <li> <strong>Physical Requirements</strong> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> </ul> </li> <li> <strong>Working Conditions</strong> <ul> <li>The worker is subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.</li> <li>The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Veolia</strong>, a global leader in resource management, seeks a <strong>Technician (Mechanical)&nbsp;</strong>for our <strong>Sulaibiya Waste Water Treatment &amp; Reclamation Plant</strong> in Kuwait.</p><br><p>We specialize in innovative wastewater treatment and reclamation solutions, guided by our values of Responsibility, Solidarity, Respect, Innovation, and Customer Focus.</p><br><p>With a global workforce of 179,000, we're committed to sustainable development and optimizing resources. Join our team at this cutting-edge facility to contribute to environmental sustainability and water management in Kuwait.</p><br><p>At Veolia, you'll work on impactful projects, enjoy growth opportunities, and be part of our mission to lead the ecological transformation in wastewater treatment and reclamation.</p><br><br>Job Description<br><p><strong>Role:&nbsp;</strong></p><br><p>The Technician (Mechanical), reporting directly to Field Engineer (Mechanical), is responsible for performing maintenance and repair of mechanical equipment in the water reclamation plant. The position includes, but is not limited to, troubleshooting mechanical problems, performing preventive and corrective maintenance, and supporting the mechanical maintenance team in ensuring reliable operation of all mechanical systems in the Ultrafiltration (UF)/reverse osmosis (RO) plant.</p><br><p><strong>Responsibilities:&nbsp;</strong></p><br><p>• Carry out all preventive maintenance tasks and schedules for mechanical equipment in UF/RO facility.<br> • Troubleshoot malfunctions and operating defects and make the necessary repairs.<br> • Under the guidance of Field Engineer (Mechanical), carry out related plant modification works.<br> • Report and assist the Field Engineer (Mechanical) on the accomplishment of all maintenance activities to allow the correct operation of the plant.<br> • Execute required preventative maintenance procedures according to established schedules.<br> • Replace and install specified parts and/or make required adjustments.<br> • Perform maintenance and repair work on rotating equipment including pumps, compressors, blowers, chemical transfer/dosing pumps, and gearboxes.<br> • Conduct overhaul activities and spare parts replacement including seals, couplings, bearings, etc.<br> • Perform basic alignment works on rotating equipment.<br> • Ensure the equipment runs correctly and perform emergency repairs when required.<br> • Maintain and organize tools regularly and ensure proper tool management.<br> • Respond to requests for emergency repairs and services.<br> • Coordinate with Operation Team for reduced downtime in operations due to maintenance.<br> • Analyze routine checks and mechanical parameters to identify equipment faults and potential issues.<br> • Support the Field Engineer in preparing maintenance reports and documentation.<br> • Maintain knowledge of the report system to the extent required for timely and accurate input of field information into CMMS system.<br> • On-call availability and shift work with various schedules may also be required.<br> • Maintain a good housekeeping and adhere to EHS regulations and requirements.<br> • Optimize and assist with the development of operational quality system procedures/guidelines/documents for Water Treatment.<br> • Ensure adherence to EHS &amp; Quality processes and procedures, check job sites for potential hazards and report when things are against company policies.<br> • Maintain appropriate housekeeping for plant facilities cooperating with other departments.<br> • Ability to work independently most of the time, but report to supervisors.<br> • Train and coach Junior Technicians continuously.<br> • Determine the reasons for any malfunctions of systems or components and create a maintenance or repair plan to solve the problem.<br> • Provide technical assistance to junior team members regarding maintenance procedures.<br> • Participate in safety meetings and training programs.<br> • Maintain strong safety mindset to assure the executed work reflects the technical requirements within Veolia safety standards and EHS procedures at site.<br> • Perform administrative functions, such as completing work orders, time sheets, and maintenance logs on a complete, timely, and thorough basis.<br> • Work on prioritized &amp; emergency needs of the plant maintenance.<br> • Perform other tasks as directed.</p><br><br>Qualifications<br><p>• Diploma in Mechanical Engineering/Mechanical Trade certificate/ITI.<br> • Minimum 6 years of experience (at least 3 years for Diploma or 8 years for Trade/ITI certificate holder) in mechanical maintenance work in rotary equipment for water treatment/chemical/Oil refineries/power plants/RO plants or any other continuous manufacturing process industry.<br> • Minimum 4 years hands-on experience in overhauling, testing, repair and maintenance of all types of rotating equipment such as pumps, compressors, blowers, chemical transfer/dosing pumps, gearboxes and associated items such as seals, couplings, bearings, etc., including alignment works.<br> • Ability to communicate effectively in written &amp; spoken English.<br> • Knowledge of MS-OFFICE.<br> • Ability to work on prioritized &amp; emergency needs of the plant maintenance.<br> • Ability to establish and maintain relationship with co-workers &amp; supervisors.<br> • Strong troubleshooting and problem-solving skills.</p><br><br>Additional Information<br><p><strong>Desired Characteristics</strong></p><br><p>• Experience in water/wastewater treatment plant activities.<br> • Working experience in GCC countries.<br> • Ability to work in complete autonomy on assigned tasks.<br> • Ability to mentor and guide junior technicians.<br> • Capable of understanding the plant process &amp; P&amp;IDs to execute appropriate plant maintenance.<br> • Arabic language skill a plus.<br> • Proactive approach to identifying and resolving equipment issues.</p><br><p><strong>As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.</strong></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Data Center Network Engineers support the Enterprise-class infrastructure of the RCC-SWA. RCC-SWA engineers provide optimization, administration, and technical documentation of all enterprise infrastructure systems. Additionally, engineers resolve and appropriately complete assigned cases and change requests while acting as an escalation point for troubleshooting issues. The core infrastructure technology duties include an in-depth understanding of Cisco’s Nexus switching, ASR routing, UCS compute platforms, and lifecycle management planning. The MCF is managed by the RCC-SWA and provides enterprise Information Technology (IT) services to approved Army customers. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Produce enterprise-level support for a dynamic and large-scale networking infrastructure from the perspective of service origination in the data center, as well as service delivery in the global transport architecture. Provide expert level knowledge of data center infrastructure hardware such as Nexus 9000 series switches, Fabric Extenders, UCS chassis’ and UCS Fabric Interconnects. Along with assuming the expert role regarding vPC, FCoE, Catalyst VSS, MPLS L3VPN, eBGP/iBGP, OSPF/EIGRP, DMVPN, FlexPod design philosophy, among other tunneling and data center-centric technologies. While also offering a basic understanding of VMware’s vSphere infrastructure and the virtual networking components for troubleshooting purposes. + Installation, configuration, maintenance, and troubleshooting of the data center environment are primary roles in this position. Provides change control and engages Cisco TAC for issues, modifications and best practices when needed. + Monitors availability and reliability of the data center network and supported infrastructure utilizing DX NetOps Spectrum, SolarWinds Orion and Cisco DNA Center. + Executes engineering best practices in network builds, integration, testing, and documentation while adhering to security fundamentals provided by DISA’s Security Technical Implementation Guides (STIGs). + Perform regular system maintenance in support of IAVA vulnerabilities and CCRI compliance. + Ensure that all managed technologies are compliant with current DISA Security Technical Implementation Guides (STIGs). + Assist with identifying and investigating malicious network activity. + Create and track network issues/requests using the ServiceNow ticketing system. + Create, update and maintain detailed network diagrams. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Requires an active Secret Clearance + Education / Certifications: One-year related experience can be substituted for one year of education if the degree is required. + Bachelor’s Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. + This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. The authorized certifications for this job title are listed as follows: + BASELINE: + Cisco: CCNP: Certified Network Professional - Security + CompTIA: CASP+ ce: Advanced Security Practitioner + CompTIA: SecurityX ce + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler + ISACA: CISA: Certified Information Systems Auditor + ISC2: CCSP: Certified Cloud Security Professional + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + COMPUTING ENVIRONMENT (CE): + CNFDS: Cisco and NetApp Flexpod Design Specialist + CNFIAS: Cisco and NetApp Flexpod Implementation and Administration Specialist + NetApp: NCDA: Certified Data Administrator, ONTAP + NetApp: NCHCA: Certified Hybrid Cloud Administrator + NetApp: NCHCA: Certified Hybrid Cloud Architect + NetApp: NCIE-DPS: Certified Implementation Engineer - Data Protection Specialist + NetApp: NCIE-O-S: Certified Implementation Engineer, ONTAP Specialist + NetApp: NCIE-SAN: Certified Implementation Engineer - SAN Specialist, ONTAP + NetApp: NCIE-SS: Certified Implementation Engineer - SAN Specialist, E-Series + NetApp: NCSE: Certified Storage Engineer + NetApp: NCSIE: Certified Storage Installation Engineer, ONTAP + VMware: VCP: Certified Professional (7 and above) + VMware: VCAP-DCV: Certified Advanced Professional - Data Center Virtualization (Deploy) + VMware: VCAP-DCV: Certified Advanced Professional - Data Center Virtualization (Design) + VMware: VCDE: Certified Design Expert + VMware: VCDX-DCV: Certified Design Expert - Data Center Virtualization + ADDITIONAL CONSIDERATION: + Python and/or Ansible scripting + Cisco DevNet + Working knowledge of Linux + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + At least 10 years of practical experience working with network and systems technologies. + A full understanding of cloud computing and the different pillars that support cloud computing (IaaS, PaaS, SaaS). + Experience working with Cisco Nexus and cloud technologies. + Expert level of understanding and experience with data network systems, routing, switching, Virtual Routing and Forwarding (VRF), MPLS, and layer 2 protocols. + Experience with VPN technologies. + A solid background with TCP/IP and must be able to troubleshoot all supported network protocols. + Experience with creating and maintaining custom python scripts. + Experience working with and maintaining Cisco DNA Center. + Skills &amp; Technology Used: + Ability to verify that all systems under the direct control of RCC-SWA are properly configured in accordance with the NETCOM, RCC-SWA and DISA STIG configuration policies. + Ability to manage asset documentation for accreditation and authorization. + Ability to assess networking requirements and provide solutions. + Ability to make accurate and independent decisions under pressure. + Ability to successfully execute many complex tasks simultaneously. + Expert ability to troubleshoot infrastructure equipment. + Excellent organizational, interpersonal, written, and verbal communication skills + Ability to perform comfortably in a fast-paced, deadline-oriented work environment. + Ability to successfully execute many complex tasks simultaneously across departmental boundaries. + Experience with a customer service-oriented company At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>ASAB ESS: Alternate Site Manager (Secret Clearance)<br><br><p><b>Belong, Connect, Grow, with KBR! </b></p><br><br><br><p><b>Program Summary</b></p><br><br><p><b>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Logistics Support (SWA Log). These services provide inventory management, property accountability, equipment movement, and logistics coordination for U.S. Air Force operations across multiple locations in Southwest Asia. Alongside SWA Logistics, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</b></p><br><br><br><p><b>Job Summary</b></p><br><br><p>The Alternate Site Manager / Mechanical Engineer serves in a dual role supporting the successful execution of Engineering Support Services at AASAB and associated sites. The position provides mechanical engineering expertise while also supporting the Site Manager with the day-to-day leadership, coordination, and administration of Task Order activities.</p><br><br><p>In the absence of the Site Manager, the Alternate Site Manager (ASM) will assume responsibility for site operations and serve as the primary KBR representative for coordination with Government personnel, subcontractors, employees, and other mission partners. The position ensures work is performed safely, efficiently, and in accordance with the Performance Work Statement (PWS), Task Order Management Plan (TOMP), applicable Air Force requirements, engineering standards, and KBR policies.</p><br><br><p>As the Mechanical Engineer, the employee will provide technical engineering support related to mechanical systems, facility infrastructure, utilities, HVAC, plumbing, fire protection, mechanical equipment, and other installation engineering requirements.</p><br><br><br><p><b>Roles and Responsibilities </b></p><br><br><ul><li>Assist the Site Manager with the overall management and execution of Engineering Support Services at AASAB and associated locations.</li><li>Assume Site Manager responsibilities during the Site Manager’s absence and provide continuous leadership and operational oversight.</li><li>Serve as a primary point of coordination between KBR personnel, Government representatives, subcontractors, and mission partners.</li><li>Provide professional mechanical engineering support for facilities, utilities, infrastructure, and installation engineering requirements.</li><li>Evaluate existing mechanical systems and provide recommendations for repair, replacement, modification, or improvement.</li><li>Support HVAC, plumbing, piping, pumps, water systems, wastewater systems, fire protection, mechanical equipment, and other facility infrastructure.</li><li>Conduct facility assessments, field investigations, site surveys, inspections, and technical evaluations.</li><li>Review mechanical drawings, specifications, calculations, scopes of work, technical submittals, shop drawings, and Requests for Information (RFIs).</li><li>Support the planning, programming, design, execution, inspection, acceptance, and closeout of engineering and construction projects.</li><li>Assist with the preparation of Statements of Work, technical requirements, cost estimates, project packages, schedules, and engineering documentation.</li><li>Coordinate mechanical requirements with civil, electrical, structural, architectural, and other engineering disciplines.</li><li>Ensure engineering recommendations and project execution comply with applicable Unified Facilities Criteria (UFC), Air Force requirements, OSHA standards, codes, and accepted engineering practices.</li><li>Monitor Task Order performance and ensure work is performed in accordance with the PWS, Task Order Management Plan (TOMP), applicable regulations, and established performance standards.</li><li>Support the development, implementation, and maintenance of the TOMP and identify changes in scope, workload, staffing, or Government requirements that may require updates or contractual modification.</li><li>Coordinate staffing, scheduling, training, equipment, tools, vehicles, and other resources required to accomplish mission requirements.</li><li>Ensure personnel performing assigned work are properly trained, qualified, and competent through education and experience.</li><li>Monitor employee performance, productivity, safety, quality, and compliance with established procedures.</li><li>Identify operational, technical, schedule, and performance risks and develop appropriate mitigation strategies.</li><li>Provide technical support during equipment failures, utility outages, emergency repairs, and other mission-critical situations.</li><li>Prepare and support reports, briefings, schedules, staffing updates, performance metrics, engineering documentation, and other required Task Order deliverables.</li><li>Participate in Government meetings, project reviews, site inspections, construction meetings, and technical coordination activities.</li><li>Maintain effective communication with Government customers and provide timely updates regarding technical issues, project status, risks, and emerging requirements.</li><li>Promote a strong safety culture and ensure work is properly planned and executed in accordance with KBR, Air Force, OSHA, and site-specific safety requirements.</li><li>Maintain accurate documentation of engineering findings, inspections, recommendations, project status, corrective actions, and completed work.</li><li>Support personnel accountability, workforce planning, and day-to-day site administration as required.</li><li>Travel between AASAB and associated sites as necessary to support mission and engineering requirements.</li><li>Perform other duties and responsibilities necessary to support successful Task Order execution and the mission of the 386th Air Expeditionary Wing and its mission partners.</li></ul><p><b>Basic Qualifications </b></p><br><br><ul><li>U.S. National (USN) with an active Secret Security Clearance</li></ul><ul><li>Bachelor's degree in Mechanical Engineering from an accredited institution.</li><li>Demonstrated professional experience in mechanical engineering, facilities engineering, construction management, installation engineering, or a related field.</li><li>Previous leadership, supervisory, project management, or site management experience.</li><li>Experience supporting facility mechanical systems such as HVAC, plumbing, piping, pumps, utilities, and related infrastructure.</li><li>Ability to interpret engineering drawings, specifications, technical standards, and construction documents.</li><li>Knowledge of engineering design, construction, inspection, maintenance, and project execution processes.</li></ul><p><b>Preferred Qualifications</b></p><br><br><ul><li>Professional Engineer (PE) license or Engineer-in-Training (EIT) certification.</li><li>Previous AFCAP, U.S. Air Force, Department of Defense, or contingency operations experience.</li><li>Previous experience working at an overseas military installation or deployed location.</li><li>Experience managing multidisciplinary engineering teams.</li><li>Experience supporting U.S. Air Force Civil Engineer or installation engineering organizations.</li><li>Familiarity with Unified Facilities Criteria (UFC), Department of the Air Force Instructions (DAFI), OSHA requirements, and applicable U.S. building and engineering codes.</li></ul><br><p><b>KBR Benefits</b></p><br><br><p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Procurement Engineer / Material Control Engineer</b> in <b>Kuwait</b>. Our client is a reputed organization in the Engineering / Industrial sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Source spare parts from international and local suppliers.<br></li><li>Manage procurement activities while ensuring cost efficiency.<br></li><li>Monitor inventory levels and material availability.<br></li><li>Coordinate with vendors for quotations, negotiations, and deliveries.<br></li><li>Maintain material control records and procurement documentation.<br></li><li>Ensure timely procurement to support operational requirements.<br></li><li>Evaluate supplier performance and maintain vendor relationships.<br></li><li>Ensure compliance with procurement policies and quality standards.<br></li></ul>Required Skills<br><ul><li>International Procurement – Experience sourcing global suppliers.<br></li><li>Local Procurement – Vendor identification and negotiations.<br></li><li>Material Control – Inventory planning and stock monitoring.<br></li><li>Vendor Management – Supplier evaluation and relationship management.<br></li><li>Supply Chain Coordination – Procurement planning and logistics.<br></li></ul>Preferred Skills<br><ul><li>ERP/SAP Procurement Module<br></li><li>Contract Management<br></li><li>Import &amp; Export Documentation<br></li></ul>Work Experience Requirements<br><p>Candidates should possess a minimum of <b>10 years of experience</b> in procurement, material control, or supply chain operations, preferably in engineering or industrial environments. Experience in international spare parts sourcing and vendor management is highly preferred.<br></p><br>Education<br><ul><li><b>Minimum:</b> Any Degree<br></li><li><b>Preferred:</b> Supply Chain / Procurement Certification<br></li><li><b>Additional:</b> ERP/SAP Procurement certifications (preferred)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<p>Shall have a minimum of three years safety work experience in oil industry construction or having minimum five years working in the field of Safety in Oil Fields / Oil Refineries / Petrochemical Plant. He must be able to speak, read and write English very well Shall be a three-year full time Diploma in Engineering (i.e. Diploma disciplines in Chemical / Architecture/Civil Automotive/Mechanical/Environmental Petrochemical / Fire &amp; Safety/Petroleum/Marine/Process/Materials/Electrical/ Metallurgical/ Industrial /Mining/Safety/Polymer/Instrumentation/Production ) or Science graduate (in physics or Chemistry or Math) or two-year PAAT Diploma of Kuwait. Experience approval or simmilar evidance required. K-Company approvals preferred. Substation Experience preferred. Safety/Petroleum/Marine/Process/Materials/Electrical/ Metallurgical/ Industrial /Mining/Safety/Polymer/Instrumentation/Production ) or Science graduate (in physics or Chemistry or Math) or two-year PAAT Diploma of Kuwait. Experience approval or simmilar evidance required. K-Company approvals preferred. Substation Experience preferred.</p><p><strong>Desired Candidate Profile</strong></p><p>Shall have a minimum of three years safety work experience in oil industry construction or having minimum five years working in the field of Safety in Oil Fields / Oil Refineries / Petrochemical Plant. He must be able to speak, read and write English very well.</p><p>Shall be a three-year full time Diploma in Engineering (i.e. Diploma disciplines in Chemical / Architecture/Civil Automotive/Mechanical/Environmental Petrochemical / Fire &amp; Safety/Petroleum/Marine/Process/Materials/Electrical/ Metallurgical/ Industrial /Mining/Safety/Polymer/Instrumentation/Production ) or Science graduate (in physics or Chemistry or Math) or two-year PAAT Diploma of Kuwait.</p><p>Experience approval or simmilar evidance required.</p><p>K-Company approvals preferred.</p><p>Substation Experience preferred.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>\Position :&nbsp; Sales Consultant – Commercial Vehicle</b><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">&nbsp;&nbsp;</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">To organize and promote value added developments to supplies and services offered to company prospects and customers</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">&nbsp;</span></div><div><span style="font-size: 11px;"><b><br></b></span></div><div><span style="font-size: 11px;"><b>&nbsp;Job Responsibilities:</b></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">· Identify all technical issues of assigned accounts to assure complete customer satisfaction through all stages of the sales process.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">· Establish and maintain strong relationships throughout the sales cycle.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">· Provide pre-sales technical assistance and product education, and after-sales support services, analyzing costs and sales.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">·&nbsp; &nbsp; Liaise with other members of the sales team and other technical experts.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">· Collaborate with sales teams to understand customer requirements, to promote the sale of company products, and to provide sales support.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">· Participate in preparing and circulating annual sales plans as required.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">· Performing any other tasks as assigned by his/her direct supervisor.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Education</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Degree or&nbsp; Diploma in Mechanical / Technical Engineering or ITI</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Experience:</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Minimum 4-5 years of experience within Similar role in Automotive sector.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Knowledge &amp; Skills:</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Good Communication skills.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Strong analytical skills</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Bilingual</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Problem solving skills</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Time Management</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Salary &amp; Benefits</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Salary: Attractive Salary</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Other Benefits: Incentives</span></div><div><br></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Degree or Diploma in Mechanical / Technical Engineering or ITI</p><p>Minimum 4-5 years of experience within Similar role in Automotive sector.</p><p>Good Communication skills.</p><p>Strong analytical skills</p><p>Bilingual</p><p>Problem solving skills</p><p>Time Management</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Project Engineer I - Buildings Projects<br><br><br><br><br><p><b>Job Title </b></p><br><br><br><p><b><i>Project Engineer I- Buildings Projects</i></b></p><br><br><br><p><b>Division /Project </b></p><br><br><br><p>KBR's Sustainable Technology Solutions (STS) group is seeking a <b>Project Engineer I – Building &amp; Office Tower Projects</b> to support the planning, design, procurement, construction, and commissioning of office towers, administration buildings, control centers, and associated facility infrastructure under PMC contracts.</p><br><br><br><p><b>Primary Objectives</b></p><br><br><ul><li>Management of support services for supervising and directing engineering, procurement and management of construction contractors appointed by the Client.</li><li>Ensure the successful delivery of projects through all phases, including concept design, FEED, detailed engineering, tendering, construction, commissioning, and handover.</li><li>Act as primary technical coordination interface with client to ensure that the client’s expectations are satisfied.</li></ul><ul><li>Ensure the project conforms to the client’s approved Basis of Design and local authority requirements, building regulations, sustainability objectives, and applicable international codes and standards.</li></ul><ul><li>Coordinate architectural, structural, MEP, fire protection, security, ICT, vertical transportation, and interior fit-out disciplines to achieve an integrated design solution</li></ul><br><p><b>Responsibilities</b></p><br><br><ul><li>Support project mobilization, setup, takeover, and handover activities</li><li>Set-up, take over / hand over of projects</li><li>Establish clear objectives and deliverables for design consultants and engineering teams</li><li>Management of PMC’s engineering teams during FEED, Prepare and review scopes of work, technical specifications, employer requirements, and tender documentation</li><li>Compilation of the of scope of work documents, technical part of Invitation to Bid documents and the documentation of Project Milestone Reviews</li><li>Coordination of reviews and comments on engineering and other technical deliverables of 3rd party companies like P&amp;IDs, line lists, equipment datasheets, instrumentation index, cable routing, etc. within the agreed review time.</li><li>Ensures compliance with all applicable project standards and specifications</li><li>Ensures proper compilation and updating of as-built documents, redlines, MTOs, loop folders and commissioning binders and handover documentation.</li><li>Ensures the delivery of the as built (End of Job) documentation to the client in time and good quality</li><li>Contribution to the development of overall project schedule.</li><li>Ensures work progress as per approved schedule in close cooperation with Project Controls Team</li><li>Set up and regularly maintaining a project dashboard in close cooperation with Project Controls Team</li><li>Monitors with support of the Project Controls Team cost aspects of the project within direct control to forecast final costs, trends and takes action to avoid cost overruns.</li><li>Evaluation of Earned Value / value of work for project completion with support of the Project Controls Team</li><li>Builds and maintains a healthy relationship with clients and acts as project focal point for the client</li><li>Proactively resolves scope and schedule issues with the 3rd party contractor as they arise.</li><li>Knows the contract between the FEED- or EPC-Contractor and between the Client and 3rd party contracts.</li><li>Knowing the PMC Contract between KBR and the Client</li><li>Ensures Change Order recording and participation from project team in technical parts of change order assessment</li><li>Regularly provides input to project reports to internal Project Management and the Clients</li><li>Assessment and feedback of third-party contractor’s project reports</li><li>Defines and communicates team’s priorities such as achievement of milestones and other key project objectives.</li><li>Listens to the team, discusses the issues, resolves problems and directs activities to remove roadblocks and achieve objectives.</li><li>Effective communication with the design and engineering teams (inside PMC and third parties) and other project stakeholders like operations, maintenance etc.</li><li>Regularly chairs and records project team meetings within the PMC organisation and with the client and with the 3rd party contractors or consultants.</li><li>Responsibility for preparation and status tracking of all projects related correspondence and transmittals / project documents.</li><li>Perform together with relevant discipline engineers technical bid evaluations (TBE) and award recommendations</li><li>Participates or delegates participation of discipline engineers in Factory and Site Acceptance Tests</li></ul><br><p><b>Qualifications including Required Education, Experience, &amp; Skills</b></p><br><br><ul><li><span>B. Sc. Eng from an accredited college or university.</span></li></ul><br><ul><li><span>Minimum 15 years post-graduation total experience</span></li></ul><br><ul><li><span>10 years minimum experience post qualification in infrastructure, buildings projects</span></li></ul><br><ul><li><span>5 years of minimum experience in a Senior Project Engineer/Project Manager role</span></li></ul><br><ul><li><span>Must have demonstrated ability of effective functioning in a multi-cultural environment, preferably in the Middle East.</span></li></ul><br><b>Essential skills/experience</b><ul><li>Project planning and execution.</li><li>Multidisciplinary design coordination.</li><li>Commercial and contract awareness.</li><li>Construction and commissioning management.</li><li>Stakeholder engagement and client management.</li><li>Problem-solving and decision-making.</li><li>Strong written and verbal communication skills.</li><li>Presentation and reporting skills.</li><li>Leadership and team coordination.</li><li>Risk management and change control.</li><li>Proficiency with project management and BIM platforms.</li><li>Analysis and problems solving</li><li>Creativity/innovation</li><li>Communications, written and oral.</li><li>Ability to influence and persuade.</li></ul><br><p><b>Decarbonization – Energy Transition – Sustainability </b></p><br><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a highly skilled Estimation Engineer specializing in steel fabrication to join our dynamic team in Kuwait. This role is pivotal in ensuring that our projects are accurately estimated, which is essential for our success in the competitive project and construction planning industry. As an Estimation Engineer, you will play a critical role in analyzing project specifications, preparing estimates, and collaborating with various stakeholders to ensure that all aspects of the project are accounted for. This position offers an exciting opportunity to contribute to significant construction projects while advancing your career in a supportive environment.</p><p>Our company prides itself on fostering a collaborative team culture where innovation and professional growth are encouraged. As an Estimation Engineer, you will have access to ongoing training and development opportunities that will enhance your skills and prepare you for future leadership roles within the organization. We believe in investing in our employees, and you will find that your contributions are valued and recognized, providing a sense of fulfillment in your work.</p><p>In this role, you will not only be responsible for creating accurate cost estimates but also for identifying potential risks and opportunities within projects. Your analytical skills will be put to the test as you work with advanced estimation software and tools. Additionally, you will have the chance to work closely with project managers and engineers, ensuring that your estimates align with project goals and timelines. This is a fantastic opportunity to make a strategic impact in a growing company while developing your career in the estimation field.</p><p><b>Responsibilities:</b></p><ol><li>Prepare detailed cost estimates for steel fabrication projects by analyzing project specifications, drawings, and other relevant documents to ensure accuracy and completeness.</li><li>Collaborate with project managers and engineers to gather necessary information and clarify project requirements, ensuring all estimates align with project objectives.</li><li>Utilize advanced estimation software and tools to generate cost estimates, enhancing accuracy and efficiency in the estimation process.</li><li>Identify and analyze potential risks associated with projects, providing recommendations to mitigate these risks and optimize project delivery.</li><li>Maintain up-to-date knowledge of industry trends, materials, and labor costs to ensure competitive and accurate estimates.</li><li>Participate in project meetings to present estimates and provide insights on cost-saving opportunities and strategies for project execution.</li><li>Review and adjust estimates based on changes in project scope or specifications, ensuring that all stakeholders are informed of any impacts on project budgets.</li><li>Assist in the preparation of bid proposals and tender submissions, ensuring all necessary documentation is included and meets client requirements.</li><li>Support the project team throughout the project lifecycle, providing ongoing estimation support and advice as needed to ensure project success.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficiency in estimation software and tools to enhance accuracy in cost calculations.</li><li>Strong analytical skills to assess project specifications and develop comprehensive estimates.</li><li>Excellent communication skills to collaborate effectively with project managers and engineers.</li><li>In-depth knowledge of steel fabrication processes and industry standards.</li><li>Ability to identify and mitigate risks associated with project estimation.</li><li>Strong attention to detail to ensure all estimates are thorough and precise.</li><li>Project management skills to support project execution and delivery timelines.</li></ul></div>