مطلوب مهندسين بترول

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p><p>Operationally checks repaired or modified systems for proper operation.</p><p>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</p><p>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.</p><p>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</p><p>Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.</p><p>Disassemble and inspect parts for wear, warping, or other defects.</p><p>Repair or replace defective engine parts and reassembles and installs engine in aircraft.</p><p>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</p><p>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</p><p>Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.</p><p>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</p><p>Ability to read, write, and interpret technical duties is required.</p><p>Ability to communicate effectively with all levels of employees throughout the organization.</p><p>May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.</p><p>Perform other qualified duties as assigned.</p><p>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</p><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to climb stairs, ramps, ladders and work stands.</p><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>May be required to carry, push or pull up to and may exceed 50 pounds.</p><p>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</p><p>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</p><p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>Must be able to distinguish color and judge three dimensional depths.</p><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</p><p>Must have minimum 20/100 near and far vision, correctable to 20/20.</p><p>Must be capable of living and working in a potentially hostile environment for an extended period.</p><p>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</p><p>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</p><p>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</p><p>Minimum Requirements</p><p>High school diploma or GED equivalent is Required.</p><p>A valid (FAA) A&amp;P Certificate is Required.</p><p>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</p><p>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</p><p>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</p><p>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</p><p>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</p><p>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait).</p><p>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</p><p>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</p><p>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20)</p><p>Mechanic Pre-employment Medical Requirements:</p><p>Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</p><p>Security Clearance Requirements:</p><p>Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Role Purpose</b></p><p><br></p><p>The Business Applications Engineer will build, deploy, and support KDF's business applications on the Microsoft Power Platform and Microsoft 365. The role covers the full application lifecycle — requirements, design, development, testing, deployment, support, and controlled enhancement — turning operational and field requirements into practical, secure, and maintainable digital solutions.</p><p><br></p><p>The position works directly with business departments across Operations, HSE, Supply Chain, Finance, and HR to understand their processes and deliver working applications, automations, and reports. KDF operates Microsoft Dynamics 365, and the role provides day-to-day technical support to that environment alongside Power Platform delivery. The postholder builds within the platform standards, environment structure, and governance policies set by the Technology &amp; Digitalization Transformation function, and is accountable for the quality, documentation, and ongoing supportability of the solutions they deliver.</p><p><br></p><p><b>Key Roles and Responsibilities</b></p><p><br></p><ul><li>Work with business departments to gather, analyze, and document requirements, process flows, and acceptance criteria.</li><li>Design and build applications using Microsoft Power Apps, covering both canvas and model-driven approaches.</li><li>Build mobile-capable applications supporting field operations, including inspections, asset registration, checklists, and equipment tracking, with offline-tolerant use cases where required.</li><li>Design and maintain Dataverse solutions, including tables, relationships, business rules, security roles, and solution-aware development.</li><li>Develop and maintain automated business processes using Power Automate, including approvals, exception handling, and monitoring of live flows.</li><li>Build and support SharePoint Online solutions, including lists and libraries, content types, metadata, permissions, and integrated forms.</li><li>Develop Power BI reports and dashboards to support business reporting requirements.</li><li>Provide day-to-day technical support for the Microsoft Dynamics 365 environment, including configuration of forms, views, fields, business process flows, and role-based access against approved requirements.</li><li>Deliver integrations between Power Platform solutions and internal or third-party business systems using REST APIs and JSON.</li><li>Perform testing and support business users through user acceptance testing prior to release.</li><li>Deploy solutions across Development, Test/UAT, and Production environments using managed solutions and the established release procedure.</li><li>Provide ongoing support for applications after go-live, including incident resolution, defect fixes, access changes, performance issues, enhancements, and releases.</li><li>Maintain the enhancement backlog and agree priorities with business stakeholders.</li><li>Work within the organization's Data Loss Prevention policies, environment separation, role-based access control, and secure credential-handling standards, with no secrets embedded in solutions.</li><li>Follow change-control discipline for every release, including peer review, approval, testing evidence, rollback plans, and updated documentation.</li><li>Ensure applications and flows are owned by the business and the function rather than by an individual employee account.</li><li>Produce and maintain technical documentation, including data models, process flows, deployment steps, support runbooks, and user guides.</li><li>Deliver user training and handover material to business users and support staff.</li><li>Identify recurring inefficiencies in business processes and propose practical automation opportunities.</li><li>Escalate architecture decisions, security policy exceptions, and platform-level changes to the Digital Solutions Manager for approval.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Desired Skills and Qualifications</b></p><p><br></p><ul><li>Bachelor's degree in Computer Science, Information Technology, Software Engineering, Computer Engineering, or Information Systems.</li><li>2–5 years of hands-on experience building business applications on the Microsoft Power Platform or a comparable enterprise low-code platform.</li><li>Demonstrable delivery of production applications taken from requirements through to live use and ongoing support.</li><li>Hands-on experience with Microsoft Power Apps, including canvas applications and exposure to model-driven applications.</li><li>Practical experience with Microsoft Dataverse, including tables, relationships, business rules, and security roles.</li><li>Working experience with Power Automate, including approvals, exception handling, and troubleshooting live flows.</li><li>Experience with SharePoint Online, including lists and libraries, permissions, and integrated forms.</li><li>Power BI report development, including data preparation and basic DAX.</li><li>Experience delivering at least one integration using REST APIs, JSON, or a third-party business system.</li><li>Working knowledge of SQL and relational data modelling.</li><li>Experience supporting applications after go-live, including incidents, defects, access changes, and enhancements.</li><li>Experience working directly with business users to gather requirements and demonstrate solutions.</li><li>Ability to produce clear technical documentation and end-user guidance.</li><li>Strong analytical, problem-solving, communication, and stakeholder-engagement skills, with the ability to translate business requirements into practical solutions.</li><li>Exposure to Microsoft Dynamics 365 configuration is advantageous. Candidates without prior Dynamics 365 experience will be supported in developing it, as the role grows into this area.</li><li>Exposure to Microsoft Graph, Azure Functions, Logic Apps, or custom connectors is advantageous.</li><li>Exposure to application lifecycle management, managed solution deployment, Copilot Studio, or AI Builder is advantageous.</li><li>Awareness of DLP policies, security reviews, and change-management controls is advantageous.</li><li>Experience within the oil and gas, industrial, manufacturing, or field-operations sectors is preferred.</li></ul><p><br></p><p><b>Preferred Certifications</b></p><p><br></p><ul><li>PL-900: Microsoft Certified: Power Platform Fundamentals</li><li>PL-200: Microsoft Certified: Power Platform Functional Consultant Associate</li><li>PL-400: Microsoft Certified: Power Platform Developer Associate</li><li>PL-300: Microsoft Certified: Power BI Data Analyst Associate</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Process Engineer shall monitor and check all Contractor requisitions, work packages, risk and method statements etc. to ensure optimized work processes. Witness and verify compliance with the design specification including oversight of construction and Commissioning to ensure QHSE standards are maintained. In addition he shall provide on the job training to his client counterpart. The suitable candidate should have minimum of 12 years of relevant process experience within the Oil &amp; Gas industry together with a minimum of 10 years' experience in the design and construction of onshore plants. The ideal candidate shall be familiar with industry standard codes and construction practices. Will perform liaison duties between client and Contractor.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required</p><p>Candidate available immediately within Kuwait preferred</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Walk-In Location:</strong> Karnal<br><strong>Date:</strong> 29th May 2029<br><strong>Job Location:</strong> Kuwait<br><strong>Free Recruitment Drive</strong></p><p>Requirements:</p><ul><li>Valid NACE Level II / BGAS Grade 2 Certification</li><li>Experience in Painting/Coating Inspection</li><li>Oil &amp; Gas / Industrial project experience preferred</li></ul><p>Job Responsibilities:</p><ul><li>Inspection of blasting, painting, and coating activities</li><li>DFT/WFT, surface profile &amp; coating inspections</li><li>Ensure compliance with QA/QC and safety standards</li><li>Documentation and inspection reporting</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Location:</b></p><br><br>Kuwait City, Al Kuwayt, Kuwait<br><p><b>Job ID:</b></p><br><br>R0140514<br><p><b>Date Posted:</b></p><br><br>2026-08-12<br><p><b>Company Name:</b></p><br><br>HITACHI ENERGY ENGINEERING TECHNOLOGIES CO. (KSCC)<br><p><b>Profession (Job Category):</b></p><br><br>Engineering &amp; Science<br><p><b>Job Schedule:&nbsp;</b></p><br><br>Full time<br><p><b>Remote:</b></p><br><br>No<br><p><b>Job Description:</b></p><br><br><p><span><b>The opportunity</b></span></p><br><br><br><p>Join a team that specializes in providing remote and on-site services for protection systems in transmission and distribution substations, ensuring solutions that are timely, cost-effective, and aligned with customer expectations. Our work adheres to industry-standard processes, safety protocols, and best practices—delivering reliability and excellence every step of the way.</p><br><br><br><p><span><b>How you’ll make an impact&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</b></span></p><br><br><ul><li><p><span><span>Driving service sales and business development activities across assigned countries and market&nbsp;segments (e.g., Utilities, Power Generation, Oil &amp; Gas, EPCs, Industrial clients).</span></span></p><br><br></li><li><p><span><span>Performing relay testing, commissioning, maintenance, and troubleshooting at client substations.</span><br><span>Possess knowledge of structured programming, communication techniques, and protocols for Hitachi Energy relays and familiarity with&nbsp;other relays manufacturers is preferable.</span></span></p><br><br></li><li><p><span><span>Troubleshooting system protection problems and schemes effectively and understanding different protection and communication schemes and supervising the installation and commissioning of automation systems, ensuring full compliance with standards and best&nbsp;practices.</span></span></p><br><br></li><li><p><span><span>Demonstrate expertise in testing, commissioning, maintenance, and troubleshooting of protection systems for all equipment in&nbsp;substations up to 400 kV voltage level.</span></span></p><br><br></li><li><p><span><span>Experience in testing, commissioning, maintenance, and troubleshooting of protection systems for all equipment in&nbsp;power stations and refinery environments.</span></span></p><br><br></li><li><p><span><span>Training site operators in the use of works and ensure site-specific manuals and documentation are available before handover and are highly familiar with interlocking schemes and gas tripping schemes across all voltage levels from 380 V to 400 kV.</span></span></p><br><br></li><li><p><span><span>Consult with clients or their representatives to determine their needs and priorities.</span></span></p><br><br></li><li><p><span><span>Provide written procedures for switching, energization, isolation methods for testing, commissioning, and maintenance work.</span></span></p><br><br></li><li><p><span><span>Coordinate and oversee substation technicians and electricians, and serve as project manager, serve as the primary customer contact for specific projects, maintain a professional presentation when dealing with employees, clients, and suppliers and be well-versed in technical and safety precautions when working in live substations.</span></span></p><br><br></li><li><p><span><span>Possess leadership skills and the ability to lead, supervise, and assign work to the protection team and unnecessary outages while working in Brownfield substations or on any type of energized equipment and experience in troubleshooting electrical parts for various types of switchgear.&nbsp;</span></span></p><br><br></li><li><p><span><span>You will be responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines.</span></span></p><br><br></li><li><p><span><span>Living Hitachi Energy’s core values safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.</span></span></p><br><br></li></ul><br><p><span><b>Your background</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</span></p><br><br><ul><li><p><span><span>A bachelor’s degree in electrical engineering is preferred.</span></span></p><br><br></li><li><p><span><span>Minimum 7 years of relevant experience is required.</span></span></p><br><br></li><li><p><span><span>Strong communication and interpersonal skills.</span></span></p><br><br></li><li><p><span><span>Ability to work independently and as part of a team.</span></span></p><br><br></li><li><p><span><span>Proficient in using testing and diagnostic equipment.</span></span></p><br><br></li><li><p><span><span>Ability to interpret and work from electrical drawings and schematics.</span></span></p><br><br></li><li><p><span><span>Strong organizational and time management skills.</span></span></p><br><br></li><li><p><span><span>Commitment to continuous improvement and learning.</span></span></p><br><br></li><li><p><span><span>Proficiency in both spoken &amp; written English language is required.</span></span></p><br><br></li></ul><br><br><p><b>Accessibility and reasonable accommodation</b></p><br><br><p><b>Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a </b><span><b><u>general inquiry form</u></b></span><b> on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.</b></p><br><br><br><p><b>This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.</b></p><br><br><br><p><b>Use of Al and automated tools in recruitment</b></p><br><br><p><b>As part of our recruitment process, Hitachi Energy uses digital and automated tools, including Al-supported solutions, to assist with activities such as application screening, job matching, and interview scheduling. These tools are designed to support our recruiters and do not replace human decision-making. Candidate data is processed in accordance with applicable data protection and employment laws as well as </b><span><b><u>Hitachi's Global Data Privacy Notice.</u></b></span><b><br><span>Background Screening and Security Checks</span></b></p><br><br><p><b><span>As part of the hiring process, Hitachi Energy conducts pre-employment background checks that may include verification of employment history, education, criminal records, and other relevant information, in accordance with applicable laws.</span></b></p><br><br><p><b><span>For certain roles—particularly those involving access to sensitive information, financial responsibilities, client data, regulated environments, or security-sensitive functions—additional or more comprehensive background or security screenings may be required. These may include, but are not limited to, enhanced criminal history checks, credit history reviews (where legally permissible), sanctions screening, or other due diligence measures aligned with the responsibilities of the position.</span></b></p><br><br><p><b><span>The scope and depth of any background or security review will be determined based on the nature of the role and business necessity, and will always be conducted in compliance with applicable federal, state, and local laws. Candidates will be notified and, where required, asked to provide consent prior to the initiation of any such checks.</span></b></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Launch Your Career as a Field Engineer with Weatherford</strong> &nbsp;</p><br><p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our&nbsp;cutting-edge&nbsp;technologies and the real-world challenges faced in oil and gas rigs. &nbsp;</p><br><p>This is more than just a job —&nbsp;it’s&nbsp;an adventure.&nbsp;You’ll&nbsp;be working in the field, often at remote rig sites, where&nbsp;you’ll&nbsp;gain unmatched experience and responsibility from day one. Whether&nbsp;it’s&nbsp;assembling equipment, analysing data, or solving problems on the fly,&nbsp;you’ll&nbsp;be at the heart of operations that matter. &nbsp;</p><br><p><strong>Your Development Journey</strong> &nbsp;</p><br><p>You’ll&nbsp;be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: &nbsp;</p><br><ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global&nbsp;centers. Travel may be needed to gain real-world experience&nbsp;</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training&nbsp;</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients&nbsp;</li></ul><p><strong>Your day-to-day could include: </strong>&nbsp;</p><br><ul> <li>Prepare, deploy, and&nbsp;operate&nbsp;advanced downhole tools to meet specific wellsite objectives&nbsp;</li> <li>Utilize&nbsp;cutting-edge&nbsp;simulation software to design and&nbsp;optimize&nbsp;wellsite solutions tailored to client needs&nbsp;</li> <li>Analyse performance data and recommend improvements &nbsp;</li> <li>Manage equipment&nbsp;logistics&nbsp;and ensure seamless setup and operation at the rig site&nbsp;</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams&nbsp;</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance&nbsp;</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently&nbsp;</li></ul><p>&nbsp;<strong>What&nbsp;We’re&nbsp;Looking For</strong> &nbsp;</p><br><ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months&nbsp;</li> <li>No more than 1 year of experience&nbsp;</li> <li>English language fluent&nbsp;proficiency&nbsp;(written and spoken)&nbsp;</li> <li>Strong communication&nbsp;and interpersonal skills&nbsp;</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions&nbsp;</li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore)&nbsp;</li></ul><p><strong>What to Expect</strong> &nbsp;</p><br><p>This role is physically and mentally demanding.&nbsp;You’ll&nbsp;work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if&nbsp;you’re&nbsp;up for the challenge, the rewards are big. &nbsp;</p><br><p>You’ll&nbsp;join one of our specialized product lines, such as: &nbsp;</p><br><ul> <li>Completions &nbsp;</li> <li>Drilling Services &nbsp;</li> <li>Wireline Services &nbsp;</li> <li>Artificial Lift &nbsp;</li> <li>Well Services &nbsp;</li> <li>Managed Pressure Drilling…and many more &nbsp;</li></ul><p><strong>Why Join Us?</strong> &nbsp;</p><br><ul> <li>Fast-track your career with structured development and mentorship &nbsp;</li> <li>Work with&nbsp;cutting-edge&nbsp;technology in real-world settings &nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services &nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more &nbsp;</li></ul><p>Ready to engineer your future? Apply now and start your journey with Weatherford&nbsp;</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a dedicated and experienced Rigging Supervisor to join our dynamic team in the project and construction planning sector. This role is pivotal in overseeing and managing rigging operations, ensuring that all activities are conducted safely and efficiently. As a Rigging Supervisor, you will play a crucial role in coordinating rigging activities, providing leadership and direction to your team, and ensuring compliance with industry standards and regulations. You will have the opportunity to work on exciting projects within the oil and gas sector, contributing to the successful execution of our operations.</p><p>In this position, you will not only be responsible for managing day-to-day rigging activities but also for mentoring and training junior staff, fostering a culture of safety and excellence within the team. We believe in investing in our employees' growth, and as such, you will have access to ongoing training opportunities that will enhance your skills and career progression. Our collaborative team culture encourages open communication and innovation, allowing you to contribute your ideas and solutions to improve our processes.</p><p>As a Rigging Supervisor, you will work closely with other departments to ensure seamless project execution and will have a significant impact on the overall success of our operations. Your leadership will guide the team in achieving project milestones while maintaining the highest safety standards. This is a fantastic opportunity to take your career to the next level, as you will be part of a forward-thinking company that values its people and recognizes their contributions to our success.</p><ol><li><b>Responsibilities:</b>Supervise and coordinate all rigging activities on-site, ensuring adherence to safety protocols and operational guidelines to prevent accidents and ensure project efficiency.</li><li>Conduct regular inspections of rigging equipment and machinery, identifying any maintenance needs and ensuring that all tools are in optimal working condition for safe operations.</li><li>Develop and implement rigging plans and procedures, collaborating with project managers and engineers to align with project specifications and timelines.</li><li>Provide training and mentorship to rigging crew members, enhancing their skills and knowledge to foster a high-performing team committed to safety and excellence.</li><li>Monitor and evaluate the performance of rigging operations, analyzing data to identify areas for improvement and implementing corrective actions as necessary.</li><li>Ensure compliance with industry regulations and company policies, conducting safety meetings and audits to uphold a culture of safety on the job site.</li><li>Collaborate with other departments, including engineering and safety, to ensure seamless communication and coordination of rigging activities with overall project objectives.</li><li>Assist in the preparation of project reports, documenting rigging activities and outcomes to provide transparency and accountability to stakeholders.</li><li>Act as the primary point of contact for all rigging-related inquiries, addressing concerns and providing solutions to maintain operational efficiency.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Extensive knowledge of rigging techniques and safety standards in the oil and gas industry.</li><li>Strong leadership skills to effectively manage and motivate a diverse team of rigging professionals.</li><li>Excellent communication skills, both verbal and written, to facilitate collaboration across departments.</li><li>Proficiency in conducting safety inspections and risk assessments to ensure compliance with regulations.</li><li>Ability to develop and implement effective rigging plans tailored to specific project requirements.</li><li>Experience in using rigging equipment and tools, with a focus on maintenance and safety protocols.</li><li>Strong analytical skills to evaluate rigging operations and identify opportunities for improvement.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Architecture &amp; Development: Architect, develop, and maintain robust, scalable, and secure front-end applications using Angular (latest versions). Data Visualization: Build high-performance dashboards capable of handling real-time, high-frequency data streams, time-series data, and complex industrial charting. Technical Leadership: Mentoring junior/mid-level developers, establishing front-end coding standards, conducting rigorous code reviews, and driving UI/UX best practices. Collaboration: Work closely with product managers, data scientists, backend engineers, and industrial domain experts to translate complex operational requirements into clean interfaces. Performance Optimization: Optimize application performance for maximum speed, scalability, and seamless rendering of massive datasets. Modernization: Drive the migration of legacy front-end systems into modern, modular Angular architectures (e.g., Micro-frontends, Monorepos).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 10+ years of professional software development experience, with a strict focus on front-end technologies.</li><li>Angular Expertise: 6+ years of deep, hands-on experience with Angular (including RxJS, NgRx/state management, Angular CLI, and standalone components).</li><li>Core Web Tech: Mastery of JavaScript (ES6+), TypeScript, HTML5, and advanced CSS/SASS.</li><li>Testing &amp; CI/CD: Strong experience with front-end testing frameworks (Jest, Cypress, Karma) and integrating front-end builds into CI/CD pipelines.</li><li>Data &amp; APIs: Proficient in consuming complex RESTful APIs and WebSocket connections for real-time data streaming.</li><li>Good communication with English</li><li>Good problem-solving skills</li><li>Good documentation skills</li><li>Flexible to travel to Kuwait</li><li>Experience working as oil and gas domain is preferred</li><li>Landmark Business Domain is preferred</li></ul><p></p></section>

<p><h4>Job description</h4> <p>The aircraft mechanic II - powerplant/engine – back shop mechanic (T700/701C/D, T55-714) with experience in all three MDS UH60, CH47 & AH64 performs and inspects aviation unit (AVUM), intermediate (AVIM) and depot maintenance on assigned aircraft systems.</p> <p>Perform maintenance and repair of major assemblies and subassemblies of the T700/701C/D, T55-714 and auxiliary power units.</p> <p>Inspect engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks.</p> <p>Perform blade blending and blade replacement in cold section of powerplants.</p> <p>Replace or repair worn or damaged components, such as generators, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves.</p> <p>Ability to perform hot section inspections and determine replacement of hot section components (GG rotors, stators, fuel injectors, igniters, power turbine).</p> <p>Disassemble and inspect parts for wear, cracks, security, or other defects.</p> <p>Perform engine removal, replacement, reinstallation, and quick-change assembly (QCA) maintenance tasks.</p> <h4>Minimum requirements</h4> <ul> <li>High school graduate or equivalent is required.</li> <li>Five (5) years of recent applicable aircraft maintenance experience is required.</li> <li>With A&P: two (2) years aviation maintenance experience, and two (2) years' experience on MDS UH60, CH47, & AH64 is required.</li> <li>Without A&P: must have three (3) years aviation maintenance experience, three (3) years rotary wing aircraft experience and two (2) years on the assigned mission design series UH-60, AH-64, CH-47 (MDS) to qualify.</li> <li>All experience must be within the five (5) most recent years.</li> <li>Must be in possession of a valid U.S. passport for travel internationally. Passport must contain a minimum of 6 blank pages and 2 years remaining before expiration date.</li> <li>Ability to obtain/maintain a US government security clearance (NAC-I T1) public trust. US citizenship is required to obtain a security clearance, and for facility access to this site.</li> <li>Able to clear CENTCOM MOD physicals requirement for deployment (attend CRC).</li> <li>Must be able to obtain Kuwait visa.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li> <li>Thorough knowledge of aircraft electrical and avionics component and system troubleshooting, repair procedures and replacement of parts.</li> <li>Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>May work in aircraft maintenance hangar or outside.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift up to 50 pounds.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to see imperfections, micrometer readings and other small scales.</li> <li>Must be able to communicate by voice and detect sound by ear.</li> <li>Must be able to distinguish color and judge three-dimensional depth.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> </ul> <h4>Compensation details</h4> <p>Not applicable</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting</h4> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Key Responsibilities</b></p><ul><li>Identify and develop new business opportunities for <b>Industrial Battery Chargers, DC Systems, Industrial Batteries, and Solar Solutions</b> across government, utilities, industrial, and private sectors.</li><li>Build and maintain strong relationships with contractors, consultants, EPC contractors, and end-users.</li><li>Handle RFQs, tenders, and project inquiries related to DC power systems and solar applications.</li><li>Prepare technical and commercial proposals in coordination with internal engineering and procurement teams.</li><li>Promote Industrial Battery Chargers, DC Systems, Ni-Cd Batteries, Lead Acid Batteries, Battery Monitoring Systems (BMS), Solar PV Systems, and related solutions.</li><li>Conduct technical presentations, commercial meetings, and product demonstrations.</li><li>Follow up projects from inquiry stage through technical evaluation, negotiation, and award.</li><li>Coordinate with principals and suppliers for technical support, quotations, and project execution.</li><li>Maintain sales pipeline and achieve assigned sales targets.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Requirements</b></p><ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Minimum 5 years of experience in electrical sales within a project environment.</li><li>Strong knowledge of:</li><li>Industrial Battery Chargers</li><li>DC Systems</li><li>Industrial Batteries (Ni-Cd / VRLA)</li><li>Battery Monitoring Systems</li><li>Solar PV Systems</li><li>Experience in Kuwait market is mandatory.</li><li>Oil &amp; Gas and Utility sector experience is an advantage.</li><li>Valid Kuwait Driving License.</li><li>Transferable Visa (Article 18) preferred.</li><li>Strong communication, negotiation, and presentation skills.</li></ul><p><br></p></div>

<p><h4>Job description</h4> <p>The Army Aviation GSE - Ground Support Equipment Mechanic diagnoses malfunctions and repairs ground support equipment.</p> <p>Three (3) years of aviation GSE experience in the last six (6) years. Actual and recent aviation-related experience in the repair, modification, maintenance, and overhaul of related equipment being serviced and their associated components (APUs, etc).</p> <p>Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.</p> <p>Uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, and document maintenance actions, and analyzes, diagnoses, and repairs GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools.</p> <p>Maintains external fuel and grounding systems.</p> <p>Performs scheduled and unscheduled maintenance on GSE - inspects, tests, and operates GSE to determine equipment serviceability and proper operation.</p> <p>Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air.</p> <p>Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</p> <p>Disassembles and assembles malfunctioning GSE accessories and components.</p> <p>Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories, stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</p> <p>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</p> <p>Maintains vehicle records.</p> <p>Maintains and updates paper and electronic equipment records.</p> <p>Provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations.</p> <p>Practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</p> <p>Performs other qualified duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent.</li> <li>U.S. military technical school or specialized training course is desired.</li> <li>Three (3) years of aviation GSE experience in the last six (6) years. Actual and recent aviation-related experience in the repair, modification, maintenance, and overhaul of related equipment being serviced and their associated components (APUs, etc).</li> <li>Valid U.S. passport required, and able to travel internationally with minimum 6 blank pages and two (2) plus years' validity on passport expiration date at the time of hiring.</li> <li>Must be able to obtain and maintain facility Public Trust NAC-I. Note: U.S. citizenship is required for facility Public Trust NAC-I at this work location.</li> <li>Able to pass CENTCOM medical requirements for deployment (attend CRC).</li> <li>Must be able to obtain a Kuwait visa.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of inspection, servicing, troubleshooting, and repair of ground support equipment.</li> <li>Knowledge of military publications (including electronic manuals), drawings, blueprints, microfilm, diagrams, and schematics is mandatory.</li> <li>Knowledge of military and/or company forms required by work assignments.</li> <li>Individual must be able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul> <h4>Compensation details</h4> <p>Not applicable.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance.</li> <li>Paid time off and holidays.</li> <li>Retirement benefits (including 401(k) matching).</li> <li>Educational reimbursement.</li> <li>Parental leave.</li> <li>Employee stock purchase plan.</li> <li>Tax-saving options.</li> <li>Disability and life insurance.</li> <li>Pet insurance.</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 06/10/2026 - Until filled.</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-02&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-TX-EL PASO-M2 ~ 7201 Montana Ave ~ BLDG M2&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required on day 1<br><br><p>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.</p><br><br><br><p><b>What You Will Do :</b></p><br><br><p>The Dimensional Test Equipment (DTE) / Automatic Test Equipment (ATE) Engineer</p><br><br><p>As the principal authority for the support and maintenance of the contractor supplied</p><br><br><p>PATRIOT depot test stations, except for General Electric Test Set, the ATE engineer shall:</p><br><br><p>1. assist with determining operating ability of all contractor test equipment</p><br><br><p>2. verify that all test station manuals, test procedures, test software, fixtures, and Units</p><br><br><p>Under Test (UUT) are the correct configuration</p><br><br><p>3. assist in isolating problems between test station hardware, software, and UUT</p><br><br><p>4. assist and resolve test station software problems at system and UUT level</p><br><br><p>5. provide direct interface with contractor test personnel when additional testing</p><br><br><p>experience is required</p><br><br><p>6. coordinate training with KAD Depot trained technicians</p><br><br><p>7. schedule both informal classroom and practical exercise training activities that refresh previous depot training lessons</p><br><br><br><p>The DTE/ATE support personnel provide the technical operating knowledge, electrically and mechanically, as well as extensive practical experience to effectively operate, maintain and provide “self-sufficiency” training to the in-country support personnel. The DTE specialist will provide hands-on maintenance support and operational training on the repair of the Radar transmitter Battery Replaceable Units (BRU’s). Systems are computer driven and training will consist of both electronic and mechanical repair for the units under test. Working under a Patriot Test Station Lead, this position will require hands-on operation, maintenance and sustainment of the PAT 243 and PAT 247 Patriot test stations in support of Patriot Configuration 3+ systems. This will include operating troubleshooting and sustaining the coolant oil processing unit and Radar coolant group to ensure oil flow and glycol resistivity requirements are met for system unit operation. This will also include sustaining and troubleshooting converters, inverters and electric circuit’s assembly for the transmission system, by tracking signals and measuring voltage, current and resistance measurements to isolate problems to the component level on the Pat 247 test station. Functionally verifies the operational condition of the PAT 243, 244 and PAT 247 test stations to verify operational status. Demonstrates proper maintenance, sustainment, repair procedures and techniques. Participates in on-the –job training programs. Prepares, fills out and submits maintenance reports, system problem reports (SPR’s) and performs other duties as directed.</p><br><br><br><p><b>This position is located in Kuwait.</b></p><br><br><br><br><p><b>&nbsp;Qualifications You Must Have :</b></p><br><br><p>Must have four (4) years of demonstrated knowledge and experience in the operation, maintenance and sustainment of Dimensional Test Equipment (DTE) Station equipment and for testing, troubleshooting and repairing Patriot electronics Assemblies and Subassemblies to the component level, or equivalent test stations. Experienced in reading and understanding engineering drawings, schematics, books, technical documents and PC software. Demonstrated skills in using general tools and general use commercial test equipment, also in replacing component parts on circuit card assemblies. Must be able to work in extreme desert environments and lift 50 pounds. Must have a good understanding of standard industrial test equipment such as digital volt meters, high voltage probes, power meters, spectrum analyzers, frequency counters and oscilloscopes. A Secret Security Clearance is required.</p><br><br><br><p><b>Qualifications We Prefer:</b></p><br><br><p>A minimum of 6 to 8 years hands on knowledge and experience operating, maintaining and sustaining PAT 243, and PAT 244 test stations or equivalent test stations. Demonstrated experience working on Configuration 3 system assemblies and subassemblies. Experience working in and with a Middle East customer directly. Knowledge and experience in maintaining and sustaining DTE test station equipment.</p><br><br><br><p><b>Required Education:</b></p><br><br><br><p>Bachelor's degree&nbsp;in related field and 8-12 years of related experience.&nbsp;</p><br><br><br><p><b>What We Offer:</b></p><br><br><br><p>Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.</p><br><br><br><p><b>Additional Information:</b></p><br><br><br><p>Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products</p><br><br><br><p>#Patriot</p><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a Mechanical Superintendent Deep Drilling with extensive drilling equipment maintenance experience for our client in Kuwait. Position Overview: The Mechanical Superintendent Deep Drilling will oversee mechanical maintenance activities for deep drilling land rig operations, ensuring equipment reliability, maintenance efficiency, and safe operations. Key Responsibilities: Maintenance Management: Supervise maintenance and repair activities for all rig mechanical systems. Develop maintenance strategies and schedules to maximize equipment availability. Monitor equipment performance and implement reliability improvement initiatives. Ensure preventive and predictive maintenance programs are effectively executed. Equipment Reliability: Lead troubleshooting and failure analysis activities. Coordinate major equipment overhauls and repairs. Ensure critical spare parts availability and inventory management. Support efforts to reduce non-productive time (NPT). Compliance &amp; Safety: Ensure compliance with company HSE standards and maintenance procedures. Participate in audits, inspections, and incident investigations. Maintain accurate maintenance records and reports. Leadership: Supervise mechanical maintenance teams and contractors. Mentor and develop technical competencies within the team. Coordinate with Rig Managers, OEMs, and service providers.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree or Technical Diploma in Mechanical Engineering or related discipline.</li><li>Minimum 10+ years of drilling equipment maintenance experience.</li><li>At least 3 years in a supervisory or superintendent role.</li><li>Extensive experience supporting deep drilling land rigs (3000HP and above).</li><li>Strong knowledge of drilling equipment maintenance and reliability practices.</li><li>Experience using CMMS systems is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts.</p><p><strong>Major Responsibilities:</strong> Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. Ensure all work areas and equipment are kept clean, orderly and in a safe manner. Performs quality and safety self-inspections. Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). Perform other duties as assigned in accordance with contractual, functional, and mission requirements.</p><p><strong>Other Requirements:</strong> Work will be outdoors and indoors. Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>One year related experience may be substituted for one year of education, if degree is required.</li><li>Prior military service of AFSC 3E072, Power Production Journeyman</li><li>Must be MAAS/BAK-12 Factory Trained &amp; Certified</li><li>High school diploma or equivalent.</li><li>Must be a U.S. Citizen with a current, valid U. S. Passport and Driver s License (able to drive manual transmission).</li><li>Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment.</li><li>Must have the capability of obtaining an Air Force flight line driver s license.</li><li>Must be able to pass a flight line access test and obtain flight line access badge.</li><li>Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc.</li><li>Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear.</li><li>Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12.</li><li>Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization.</li><li>Must have three years of experience operating and maintaining prime power spot generators and backup generators.</li><li>Must be capable of giving and receiving instructions.</li><li>Must be fluent reading and speaking English.</li><li>Able and willing to work periods of long hours to meet mission requirements.</li><li>Military experience in a contingency environment and knowledge and experience working with government contracts preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. JOB DETAILS Direct Report Project HSE Manager Operational Scope Civil Works | Drilling &amp; Completions | Work Over | Facilities | Production Supervises Mechanical Lifting contractors; Drilling Rig Lifting Crews; any Contractor performing Mechanical Lifting activities under SLB operational control; site level DROPS auditors and HSE Specialists in their execution of the DROPS Program</p><p>2. ROLE PURPOSE The Mechanical Lifting &amp; DROPS Subject Matter Expert Lead is the SLB Mutriba Project authority for the safe design, planning, execution, and continuous improvement of Mechanical Lifting and Dropped Objects Prevention (DROPS) activities across the Mutriba Field Development Project. The role combines planning and operational SME oversight of lifting operations with assurance of the Project's DROPS system implementation, ensuring full compliance with SLB standards, client requirements, and applicable regulatory frameworks across all project phases and contractor interfaces.</p><p>3. KEY RESPONSIBILITIES</p><p>Mechanical Lifting SME</p><ul><li>Lead the planning, preparation, implementation, monitoring, and review of Mechanical Lifting Plans (MLPs) for all project phases, including all prevention and mitigation measures.</li><li>Review and validate all critical lifting plans prepared by SLB and Contractors, categorize lifts in accordance with the Lift Categorization Questionnaire, and submit Critical and Non-Routine lifts to the right channels.</li><li>Personally supervise the execution of Non-Routine, Critical, and Complex lifts across all project locations, such as Rig Mobilization, Initial Rig Moves, Skidding operations and de-mobilization.</li><li>Ensure all lifting risk assessments (HARC/JSA) are prepared, reviewed, and adequate prior to the commencement of any lifting operation.</li><li>Assess Pre-Job Safety Meetings (PJSMs) related to mechanical lifting operations and verify that controls identified in the MLP and HARC are communicated and understood by all participants.</li><li>Advise and stop lifting operations during adverse weather conditions (lightning, high-wind events) and verify suspension and resumption criteria are clearly defined and enforced at site level.</li><li>Establish, maintain, and audit all Project Lifting Equipment Registers across all rig sites and call-out services, ensuring all lifting appliances and accessories are inspected, certified, color-coded, and fit for purpose.</li><li>Verify that third-party lifting equipment introduced to SLB managed sites holds valid certification from an LEEAaccredited or equivalent body, aligned with applicable standards.</li><li>Ensure adequate storage and in-service maintenance of all lifting gear and accessories in accordance with Project and client s requirements.</li><li>Drive compliance with SLB's Mechanical Lifting Standard (SLB-HSE-S013) and Mechanical Lifting B.O.O.K. (SLB-HSE-M013) across all contractor interfaces.</li><li>Conduct frequent, structured audits of all ML activities and equipment at rig sites and call-out service locations, documenting findings and tracking corrective actions closure.</li><li>Perform ML related assessments for the Annual Audit and Inspection Plan (AAIP) to verify ongoing compliance with SLB standards, client procedures, and regulatory requirements.</li><li>Report all lifting-related events in QUEST (SLB incident management system) in a timely manner, ensuring accuracy of classification, causal analysis, and corrective/preventive action assignment.</li><li>Lead or actively participate in investigations of any incident, near miss, or high-potential event related to mechanical lifting operations.</li><li>Coach, assess, and verify the competence of personnel involved in ML operations such as Lifting Supervisors, Crane Operators, Banksmen, and Riggers, against defined competency frameworks.</li><li>Maintain competency assessment records and ensure training validity periods are tracked and renewed.</li><li>Deliver or coordinate delivery of ML awareness and technical training as required by project needs.</li><li>Serve as primary interface with customer s Lifting Authority for ML plans, approvals, and regulatory compliance.</li></ul><p>DROPS Authority</p><ul><li>Project-level DROPS Program Assurance Lead for integrity, consistency, and effectiveness of the DROPS prevention program across all Mutriba Project locations.</li><li>Review, evaluate, and formally validate DROPS Inspection Reports submitted by rig sites and service locations, verifying accuracy on findings, classification, and effectiveness and closure of corrective actions.</li><li>Validate the correct implementation of DROPS, including DROPS Zone identification, zoning maps, barrier deployment, DROPS Picture Books, tethered tool program, and related.</li><li>Conduct structured DROPS Program audits across all active project phases and locations, assessing compliance with SLB-HSE-S023 (DROPS Standard) and the DROPS B.O.O.K. (SLB-HSE-M023).</li><li>Verify DROPS inspection checklists for rig-ups, and the maintenance of DROPS Inspection Schedules.</li><li>Support site-level HSE Supervisors in identifying dropped object and Work at Height hazards.</li><li>Ensure DROPS incidents are reported, classified, and investigated in accordance with project and SLB requirements, and lessons-learned dissemination across the project.</li><li>Maintain and monitor DROPS program performance metrics; escalate systemic non-conformances.</li></ul><p>Additional Responsibilities</p><ul><li>Participate in Project HAZOP/HARC processes as the ML and DROPS SME for ML scenarios under review.</li><li>Support development and review of project HSE Plans, procedures, and standards related to ML and DROPS.</li><li>Contribute to pre-mobilization readiness reviews as the ML/DROPS technical authority.</li><li>Support emergency response planning for lifting-related scenarios (crane collapse, load drop, manriding rescue) and verify that adequate rescue plans are in place.</li><li>Assist developing the Annual Audit and Inspection Plan (AAIP) for ML and DROPS activities.</li></ul><p>4. AUTHORITY</p><ul><li>Authority to Stop Work on any mechanical lifting or related activity that does not comply with approved lift plans, SLB standards, or client requirements.</li><li>Authority to reject and require re-submission of non-compliant lift plan with SLB or client requirements.</li><li>Authority to require the removal of lifting equipment or accessory found defective, uncertified, or non-compliant.</li><li>Authority to withhold validation for any site or location non-compliant with DROPS system requirements.</li><li>Authority to escalate non-conformances to Contractor and Project Management</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in engineering or Technical Career</li><li>Professional Certification: LEEA Appointed Person for Lifting Operations or similar.</li><li>Third-party certification credited by LEEA or NSL.</li><li>DROPS Level 3 Focal Point.</li><li>Minimum 10 years of experience in a dedicated Mechanical Lifting supervisory or SME capacity, preferably on the Oil &amp; Gas Industry.</li><li>Demonstrated experience operating in multi-contractor onshore drilling environments, including direct supervision of crane, rigging, and lifting appliance crews.</li><li>Prior experience conducting DROPS program audits and managing DROPS systems at rig or field level</li><li>Fluent English mandatory. Arabic is an advantage.</li></ul><p></p></section>

<p>The Assistant Driller works under the Driller supervision to direct, support and take part in various activities to fulfil the drilling/work-over program. Their responsibilities include maintaining and preparing rig floor equipment and tools for use, overseeing drilling crew activities, assisting in handling drill pipe, or casing, monitoring &amp; reporting changes in drilling mud characteristics and ensuring proper housekeeping, in a timely manner considering the safety of personnel, the environment, and equipment to maximize drilling operation efficiency.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General Duties:</strong> Support the Driller in all aspects of the drilling operation and rig floor activities, supervise and train junior crew members (Derrick Men Floor Men Roustabouts). Assists in the operation and preparation of drilling equipment and machinery. Helps with the rig preparation, equipment assembly and perform routine inspections, Cleans and lubricates equipment, identifies equipment that may require repair or replacement and reports for necessary actions to be taken.</p><p><strong>Rig Operations:</strong> Arranges the proper drill string &amp; cross-over subs sizes &amp; equipment for continuous drilling / work-over operations. Arranges bottom hole assemblies and coordinates with Derrick-man drill string and drill collar changes during the "pulling out" and the "running in" of a drill string. Directs drifting and measuring of pipes to ensure similarity and correct dimensions and informs the Driller of any variances &amp; maintain records for drilling &amp; servicing operations. Assists in preparing all tools and equipment required for well operations Including. Drifting tubulars and maintaining accurate records of all tubular runs in the hole including pipe tally records. Recording BHA/completion components and trip sheets. Assists and relieves the Driller as necessary in supervising all drilling / workover operations conducted on the unit, ensuring that such work is carried out efficiently and in compliance with ADES approved operating procedures which includes all necessary JSA and PTW. Assists in Nipping up/down BOP as required. Assists with drill pipe and casing operation &amp; monitors any change in drilling parameters to facilitate the drilling/workover process. Ensures safe handling of pipe, tongs, slips, breaking and correct make-up of connections. Slip and cut and restringing of the drilling line. Takes necessary actions to correct hazardous conditions &amp; practices.</p><p><strong>Mud Circulating System:</strong> Monitors and maintains the drilling fluid circulation system, fluid lines, shale shakers and trip tanks &amp; ensures proper handling of the drilling fluid products. Advises the Driller of any significant changes in drilling mud characteristics or mud levels and loss of circulation immediately. Observes the mud flow and check materials needed for "pre-kick" conditions and informs the Driller of potential problems that could occur during the operation. Advises the usage of mud chemicals, drilling fluids, and cement slurries for Driller's calculation and input for the morning drilling report so that appropriate corrective actions can be taken whenever necessary.</p><p><strong>Well Control:</strong> Operates and maintains well control equipment, ensuring it is in proper working order and ready for immediate use. Monitor for any down hole irregularities such as kicks, pressure fluctuations, and abnormal torque. Take immediate action to secure the well in the event of a well control incident and promptly inform the Senior/Night Tool pusher and client representative. Receives comprehensive training in well control procedures and techniques to enhance knowledge and ability. Communicates effectively with the drilling crew and well control team, exchanging information and coordinating actions during well control operations. Ensures strict compliance with safety standards and protocols to prioritize the safety of personnel and the integrity of the well during well control operations.</p><p><strong>Materials &amp; Equipment:</strong> Follows up all assembly of equipment instrumentation tools or records set up in good conditions to create correct working practices &amp; inspect machinery &amp; tools for any defects &amp; make necessary repairs or replacements. Assists with maintenance, repair, or replacement tasks following the company's planned PMS. Receives and follows up Driller's instructions for the repair and maintenance of various drilling equipment such as mud mixer, shale shaker, distiller, and de-sander etc. Assists Derrick Man in maintaining mud system equipment. Arranges to adjust shale shaker screens and supervises the handling, maintenance, and storage of all drill string components. Directs the greasing, cleaning, painting and routine maintenance of all drilling equipment to ensure its reliability. Directs and participates in replacing the draw work brake bands, adjusting clutches. Supervision of the washing and painting of rig floor, substructures, stairways, and machinery to remove grease or oil spills to ensure a proper clean working space. Report to the supervisor the machinery and equipment requiring repair or replacement to avoid any equipment malfunction.</p><p><strong>Working at Heights:</strong> Adheres to and supervises the safety protocols so all consistently wear the necessary personal protective equipment (PPE) when working at elevated heights. Conducts thorough risk assessments and hazard evaluations prior to engaging in tasks performed at elevated locations. Regularly inspects and verifies the proper functioning of equipment related to working at heights. Possesses knowledge about fall protection systems and demonstrates proficiency in their proper usage. Effectively communicates any identified hazards or safety concerns to the team, promoting an initiative-taking safety culture. Actively contributes to the ongoing improvement of safety measures, providing suggestions and feedback to enhance overall safety standards.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Minimum education level required: High School or Vocational / Technical education. At least (5) years of working experience in land drilling and workover operations with reputable drilling contractors with a career history showing time served as a Roustabout, Floorman and Derrickman. At least (2) years of working experience as Derrickman. Must have working experience on Onshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Working knowledge of the English language. Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids. Situation Awareness, Communication, Teamwork, Performance shaping factors - stress and fatigue, inspecting work.</p><p><strong>Physical Requirements:</strong> Ability to perform extremely heavy work. Ability to work in extreme heights and in confined areas. Constantly climbing (stairs, ladders). Constantly pushing &amp; pulling as per Company procedure and practice. Constantly bending, twisting and standing. Ability to work at heights and in confined spaces. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work in day/night shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix. Valid Well Control (Well Sharp / IADC) Certificate.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>This position is responsible for supporting the preparation of competitive commercial pricing, cost estimates, tenders, and proposals for government, private, healthcare, industrial, and oil &amp; gas projects.The Senior Pricing Executive is responsible for collecting cost information, preparing pricing models, coordinating with internal departments and suppliers, and ensuring timely submission of commercially competitive proposals while maintaining the Company's profitability objectives.</p><p><br></p><p><b>Key Responsibilities</b></p><ul><li>Prepare detailed cost estimates, pricing models, and commercial proposals for tenders and quotations.</li><li>Analyze tender documents, BOQs, specifications, and project requirements.</li><li>Conduct financial analysis, profitability assessments, and pricing strategy evaluations.</li><li>Develop commercial schedules, bid submissions, and tender documentation.</li><li>Obtain and evaluate supplier and subcontractor quotations and negotiate commercial terms when required.</li><li>Maintain pricing databases, cost libraries, and market intelligence records.</li><li>Coordinate with Finance, Operations, Procurement, HR, and Engineering teams for pricing inputs.</li><li>Prepare commercial reports, pricing summaries, and management information.</li><li>Ensure compliance with company policies, contractual obligations, and tender requirements.</li><li>Maintain confidentiality and accuracy of all commercial and pricing information.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong analytical skills to interpret market data and make informed pricing decisions.</li><li>Proficiency in pricing software and tools for data analysis and reporting.</li><li>Excellent communication skills to convey pricing strategies and insights to diverse stakeholders.</li><li>Ability to collaborate effectively with cross-functional teams, fostering a team-oriented environment.</li><li>Experience in market research methodologies to identify trends and pricing opportunities.</li><li>Strategic thinking to develop pricing models that align with business objectives.</li><li>Leadership skills to mentor junior team members and drive team performance.</li></ul></div>

<p><h4>Building on our past. Ready for the future</h4> <p>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.</p> <h4>Specific accountabilities:</h4> <p><strong>Pre-award activities:</strong> Responsible for bid invitation preparation, processing queries from bidders, preparation of bid evaluation programmes, evaluation of bids, negotiation, contract preparation and award formalities.</p> <p><strong>Post-award activities:</strong> Responsible for conducting kick-off meetings, coordinating all contract submittals and correspondence, preparation and processing of variation orders, claims and close out.</p> <p>Manages the drafting of invitation to tender packages for contracts for large oil and gas facilities projects. Reviews and, if necessary, proposes comments on and proposes alternative text or clauses to client contract conditions.</p> <p>Reviews issues with legal, risk management, tax, and accounting personnel as a condition precedent to submitting to management for approval.</p> <p>Functions as a part of a negotiating team consisting of project management staff, to establish the terms and conditions of a contract.</p> <p>Monitors and ensures the business provisions of assigned contracts are administered to ensure compliance with contractual terms and conditions. Keeps the Projects Contracts Manager advised as to the scope, financial, and risk features of applicable contracts.</p> <p>Ensures documentation to negotiate change orders are properly produced and maintained.</p> <p>Prepares letters to clients requesting approvals and interpretations necessary to comply with the provisions of the contract.</p> <p>Ensures project and facility acceptance documents are prepared and are followed through and that acceptances are signed by the client.</p> <p>Furnishes business and financial information requested by the client concerning the project, as delegated by the Project Manager.</p> <p>Identifies contractual problems and takes appropriate action to ensure a satisfactory resolution. Follows up on those problems which demand management attention, to ensure timely response to the client; and management of contract quality standards.</p> <h4>Qualification:</h4> <ul> <li>Bachelor's degree in engineering or bachelor degree in science, commerce or law.</li> <li>IACCM professional certification in 'Contract and Commercial Management Advanced Practitioner' or equivalent is a plus.</li> </ul> <h4>Experience:</h4> <ul> <li>Extensive knowledge of contractual terms and conditions and commercial contract law.</li> <li>Excellent understanding and extensive experience of the procurement and contract administration processes and principles from preparation and issue of bidders lists, contracting plans and bid invitation package preparation through to award, administration and close out of contracts.</li> <li>Strong grasp of procedural requirements and necessity of providing an audit trail for management purposes.</li> <li>Middle East and Arabian Gulf experience is preferred but not mandatory.</li> </ul> <h4>Moving forward together</h4> <p>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.</p> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.</p> <p>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Electrical Maintenance Manager - Residential for our client in Kuwait. Position Overview: The Electrical Maintenance Manager is responsible for planning, directing, and managing all electrical maintenance activities for a fleet of onshore drilling rigs and associated equipment. Key Responsibilities: Maintenance Management: Develop, implement, and continuously improve preventive, predictive, and corrective electrical maintenance programs for land drilling rigs. Ensure maximum reliability and availability of drilling electrical systems and associated equipment. Plan and supervise major electrical overhauls, rig upgrades, and refurbishment projects. Review equipment performance and implement reliability improvement initiatives. Monitor equipment failures and perform root cause failure analysis (RCFA) to eliminate recurring issues. Ensure maintenance activities comply with OEM recommendations and industry best practices. Fleet Support: Provide technical support to multiple onshore drilling rigs. Coordinate troubleshooting of complex electrical failures affecting drilling operations. Monitor rig electrical KPIs including equipment availability, MTBF, MTTR, and maintenance compliance. Conduct periodic inspections and audits of rig electrical systems. Standardize maintenance procedures across the drilling fleet. Equipments: Responsible for electrical maintenance of: SCR and AC/VFD drilling rigs, Rig power generation systems, Diesel generators, Motor Control Centers (MCC), Variable Frequency Drives (VFD), Silicon Controlled Rectifier (SCR) systems, Top Drive electrical systems, Drawworks electrical systems, Mud pump electrical systems, Rotary equipment, Air compressors, Lighting systems, Rig camp electrical distribution systems, High and low voltage distribution systems, UPS systems, PLC and control systems, Instrumentation interfaces, Emergency shutdown systems, Rig communication systems, Electrical protection systems. Planning &amp; Asset Management: Develop annual electrical maintenance plans and budgets. Manage spare parts inventory and critical electrical components. Coordinate procurement of electrical materials and services. Optimize maintenance costs while maintaining equipment reliability. Maintain accurate maintenance records using a Computerized Maintenance Management System (CMMS). Leadership: Lead, mentor, and supervise Electrical Superintendents, Electrical Supervisors, Electrical Engineers, and field electricians. Allocate manpower effectively across multiple drilling rigs. Conduct performance evaluations and competency assessments. Identify training needs and develop technical competency programs. HSE &amp; Compliance: Ensure compliance with company HSE policies and client requirements. Promote a strong electrical safety culture. Ensure compliance with: Lock Out/Tag Out (LOTO) Electrical isolation procedures Permit to Work (PTW) Hazard identification and risk assessment Safe electrical work practices Participate in incident investigations and implement corrective actions. Ensure compliance with applicable electrical codes and standards. Quality &amp; Continuous Improvement: Develop and update electrical maintenance procedures. Conduct reliability analysis and continuous improvement initiatives. Evaluate new technologies to improve drilling equipment reliability. Support rig commissioning, acceptance testing, and startup activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications:</b></p><p>Bachelor's Degree in Electrical Engineering or equivalent. Professional certifications in electrical engineering or maintenance management are advantageous. Experience of 8+ years of electrical maintenance experience in the oil and gas drilling industry with minimum 5 years in a managerial or superintendent-level position. Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred. Experience managing electrical maintenance across multiple drilling rigs. Strong knowledge of AC and SCR drilling rig electrical systems. Experience working in GCC/Middle East drilling operations is highly desirable.</p><p></p></section>

<p>Familiar with and knowledgeable in Permit to Work (PTW) systems applicable to Oil &amp; Gas operations. Responsible for overseeing and executing all field instrumentation activities (Fire Alarm, Gas Detection, and Fire Suppression Systems and Load shifting), including installation, testing, pre-commissioning, and commissioning during the construction phase. Verify that all activities are carried out in compliance with IFC drawings, approved method statements, and Inspection Test Plans (ITPs). Supervise instrumentation works such as cable pulling, cable termination, tubing installation, junction box installation, and panel wiring activities. Coordinate and assign daily work activities to subcontractors and submit daily progress reports to the Engineer. Ensure the safe installation, testing, and commissioning of instrumentation and control systems, including field devices, control panels, junction boxes, and cabling, in accordance with approved drawings and project specifications. Ensure proper segregation and routing of signal, control, and power cables during installation. Witness and support functional testing, loop checking, and pre-commissioning activities in coordination with QA/QC and commissioning teams. Assist in the preparation, tracking, and closure of punch list items arising from inspections, pre-commissioning, and commissioning activities. Maintain red-line mark-up drawings and support the design team during as-built documentation, loop folders, and handover dossiers. Coordinate closely with electrical, mechanical, and process disciplines to ensure smooth execution of multidisciplinary activities. Work in collaboration with the commissioning team to plan and execute system energization and loop testing activities. Ability to Supervise the load shifting of DCS, ESD. Liaise with client representatives to facilitate inspections, obtain approvals, and provide progress updates.</p>