مطلوب مهندسين بترول

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Quality Assurance Engineer is responsible for validating and verifying software products and components to ensure end-users' workflow can be efficiently performed without software failures. The Quality Assurance Engineer works closely with engineering and portfolio managers to design and execute quality tests, report results for assigned software products. This person reviews the results of automatic tests with the Quality Assurance Automation Engineer during the software development cycle. Design, organize and execute test strategies, plans and suites in cooperation with the development team. Design and conduct nonfunctional tests including tests for system load and performance, security, scalability, usability and deployability. Review test plans to ensure completeness. Track testing progress. Analyze and prioritize technical problems. Identify and escalate project risks. Verify the correct fix of reported defects. Review results of automatic tests with the Quality Assurance Automation Engineer. Document, review and edit user documentation. Comply with the Software Lifecycle Management and Product Development process. Review software requirements documents. Provide input to improve product effectiveness, integration and usability. Utilize and promote the software development standards and testing and evaluation techniques defined by the Schlumberger software development organization, and contribute to their improvement. Document and report test results in a timely manner using established systems for reporting and defect tracking. Develop automated tests to support efficient regression testing, as well as scripts and software for testing.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The SIS Well Placement Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The SIS Well Placement Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The SIS Well Placement Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The SIS Well Placement Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. </p><ul><li>Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process.</li><li>Assist as required with the development of technical job designs for PLs.</li><li>Assist with identifying areas where new and cost effective techniques can be applied.</li><li>Explore opportunities for value-added products and services.</li><li>Consult with Design/Technical Engineer role as required to optimize the technical design.</li><li>Assist in real-time incident response, recovery, and investigation as related to the area of expertise.</li><li>Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise.</li><li>Remain current on new technologies.</li><li>Maintain customer visibility through active participation in professional society activities and calls for papers.</li><li>Understand the competition's technical offering.</li><li>Participate in external technical societies and communities.</li><li>Contribute, write and review technical publications.</li><li>Engage with local universities, Customer institutes and research organizations.</li></ul><p>10+</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Summary:</strong> The Lead TFA, having completed level III competencies, will contribute to the management of site activities including planning, organizing, integrating, and monitoring of resources such as labor, tools and technical assistants as required to complete the work scope according to contractual requirements. Will work within defined parameters to make decisions, apply concepts to issues of great complexity, and resolve issues through immediate action or short-term planning at customer power generating facilities.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Manage, perform, coordinate the management of site activities</li><li>Perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation</li><li>Respond to requests for emergency repairs and services to troublesome equipment</li><li>Provide technical instruction and assistance to customer representatives regarding installation, operation, calibration, repair, and maintenance at customer's sites</li><li>Perform administrative functions such as: writing technical reports, ordering materials, securing quotations, preparing job status reports, reports to customers, time sheet and expense sheets on a complete timely, and thorough basis</li><li>Signs off on all changes</li><li>Drive customer satisfaction through commitment to</li><li>Maintain strong safety mindset to assure the executed work reflects the technical requirements within GE safety standards</li><li>Knowledge to troubleshoot and provide routine maintenance checkout for wide range of equipment vintage</li><li>Coach, mentor, and train other team members as required, to impart and perpetuate field engineering and/or product</li><li>Prepare timely and accurate technical reports for customer records and a reference for future outages</li><li>Ensure all parts needed for the job are shipped to the site</li><li>Perform walk-downs during installation to ensure that the customer’s contractors are working</li><li>Perform aftermarket upgrades that need to be performed at the site</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Extensive travel to and from projects and various field assignments will be required</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization’s core values.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Extensive experience in a field services or power generation equipment maintenance position</li><li>Successful completion of required level III training programs is a minimum requirement</li><li>Strong technical competence in reading and interpreting electrical/mechanical flow and instrument diagrams dial and laser alignment and thermal growth equipment</li><li>Extensive travel to and from projects and various field assignments will be required</li><li>English proficiency required</li><li><strong>Desired Characteristics:</strong></li><li>Experience and training on Alstom, Siemens, or other OEM equipment</li><li>Strong organizational and project management skills</li><li>Strong oral and written interpersonal, communication, and leadership skills</li><li>Strong business acumen and ability to sell GE products to the customer</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Onshore, Kuwait We are seeking an experienced Wellsite Geologist to join our team on an onshore project in the Middle East. This is a critical, on-site role responsible for delivering safe, efficient, and technically sound geological operations that support real-time decision-making and optimize well delivery. As the on-site geological authority, you will work closely with drilling, subsurface, and service teams to ensure accurate data acquisition, sound interpretation, and effective execution of the well programme. Key Responsibilities Act as the primary geological representative at the wellsite, providing real-time interpretation of geological data and early identification of drilling hazards. Ensure the quality, accuracy, and integrity of all geological data collected at the wellsite. Maintain clear, timely communication and data transfer between the rig site and onshore/office-based teams. Monitor lithology, formation tops, and drilling parameters to support casing/coring point decisions. Contribute to end-of-well reports, post-well analysis, and lessons-learned initiatives to drive continuous improvement. Ensure full compliance with company operational procedures, HSE standards, and industry best practices. Liaise with mud loggers, directional drillers, and other service providers to ensure integrated, high-quality operations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>University degree in Geology, Earth Sciences, or a related discipline.</li><li>Proven wellsite experience across both carbonate and clastic formations.</li><li>Working experience with Techlog / Petrel software.</li><li>Demonstrated skill in real-time pore pressure prediction (RTPP), with working knowledge of relevant RTPP software suites.</li><li>Strong understanding of drilling hazards (e.g., overpressure, wellbore instability, fluid losses) and their geological indicators.</li><li>Familiarity with LWD/MWD/ wireline data interpretation.</li><li>Excellent communication skills, with the ability to convey technical information clearly to multidisciplinary teams under time pressure.</li><li>Willingness and ability to work on an onshore rig-based rotation in Kuwait.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Production Stimulation Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Stimulation Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations. Offers technical guidance to engineers or technicians assigned to work on a common project. Mentors junior stimulation engineers within Well Services and DCS. Organizes client seminars, understands and catalogues client needs and implements solutions. Is regarded as a stimulation expert within the oilfield community and represents Schlumberger in various and multiple industry forum. Periodic publications in these forums are expected. May participate in recruiting.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>15+</p><p></p></section>

<p>The role is responsible for achieving <strong>KD 400,000 annual enterprise revenue</strong> by driving <strong>Sales and Pre-Sales activities</strong> across <strong>Lenovo infrastructure, Microsoft cloud &amp; licensing, and Cybersecurity solutions</strong>.</p><p>The position plays a key role in establishing and scaling <strong>WITS’ Enterprise business in Kuwait</strong>, operating within a <strong>basic reseller ecosystem</strong> and competing against established Gold/Premium partners.</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><ul><li>Own the <strong>end-to-end enterprise sales lifecycle</strong> aligned with monthly, quarterly, and annual KPIs.</li><li>Build and manage a <strong>qualified enterprise pipeline</strong> across Government, Oil &amp; Gas, FSI, Healthcare, Education, and corporate sectors.</li><li>Lead <strong>RFP/RFQ/RFI responses</strong>, including requirement analysis, solution design, BOM, compliance, and pricing.</li><li>Position and sell:<ul><li><strong>Lenovo:</strong> Servers, storage, HCI, data centre infrastructure</li><li><strong>Microsoft:</strong> Licensing, Azure, M365, cloud migration</li><li><strong>Cybersecurity:</strong> SOC/MSSP, network, endpoint, and cloud security</li></ul></li><li>Conduct <strong>customer presentations, demos, and technical discussions</strong> to support deal closure.</li><li>Work closely with distributors and OEMs for <strong>deal registration, pricing support, and forecasts</strong>.</li><li>Maintain <strong>accurate weekly pipeline reporting and revenue forecasting</strong> as per KPI template.</li></ul><p>30–60–90 Day Execution Plan</p><p>First 30 Days – Foundation</p><ul><li>Complete onboarding on <strong>WITS offerings, pricing models, and KPI reporting</strong>.</li><li>Align with <strong>Lenovo, Microsoft, and Cybersecurity distributors/OEMs</strong>.</li><li>Identify and map <strong>top 20–30 target enterprise accounts</strong> and decision-makers.</li><li>Build an initial <strong>pipeline covering at least 1.5x of quarterly target</strong>.</li><li>Initiate customer meetings and capability presentations.</li></ul><p><strong>60 Days – Pipeline Expansion</strong></p><ul><li>Grow pipeline to <strong>2.5x–3x of quarterly target</strong>.</li><li>Actively engage in <strong>RFPs, RFQs, and technical workshops</strong>.</li><li>Submit qualified proposals and <strong>register deals</strong> with distributors/OEMs.</li><li>Advance opportunities to mid/late pipeline stages.</li></ul><p><strong>90 Days – Revenue Delivery</strong></p><ul><li>Achieve <strong>first closed-won enterprise deals</strong> aligned with KPI expectations.</li><li>Establish <strong>WITS visibility</strong> with key enterprise customers and partners.</li><li>Maintain a sustainable <strong>3x–4x pipeline</strong> for upcoming quarters.</li><li>Present a <strong>rolling 6–9-month revenue and account expansion plan</strong>.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <ul> <li> <strong>Install and Configure Network Equipment</strong> </li> <li>Set up routers, switches, firewalls, wireless access points, and network cabling. </li> <li>Configure LAN, WAN, VPN, and wireless networks. </li> <li> <strong>Monitor Network Performance</strong> </li> <li>Continuously monitor network availability and performance. </li> <li>Identify and resolve network bottlenecks and outages. </li> <li>Ensure maximum uptime and reliability. </li> <li> <strong>Troubleshoot Network Issues</strong> </li> <li>Diagnose hardware, software, and connectivity problems. </li> <li>Resolve internet, server, and communication issues. </li> <li>Provide technical support to employees experiencing network-related problems. </li> <li> <strong>Maintain Network Security</strong> </li> <li>Configure and manage firewalls and intrusion prevention systems. </li> <li>Implement security policies and access controls. </li> <li>Monitor for cyber threats and respond to security incidents. </li> <li>Apply security patches and firmware updates. </li> <li> <strong>Manage User Accounts and Access</strong> </li> <li>Create, modify, and remove user accounts. </li> <li>Assign appropriate network permissions. </li> <li>Support authentication services such as Active Directory. </li> <li> <strong>Perform Network Maintenance</strong> </li> <li>Upgrade network hardware and software. </li> <li>Replace faulty equipment. </li> <li>Conduct preventive maintenance to minimize downtime. </li> <li> <strong>Backup and Disaster Recovery</strong> </li> <li>Maintain backup systems for network configurations and critical data. </li> <li>Develop and test disaster recovery procedures. </li> <li>Restore network services after failures or disasters. </li> <li> <strong>Document Network Infrastructure</strong> </li> <li>Maintain network diagrams and configuration records. </li> <li>Document IP addressing schemes, device inventories, and procedures. </li> <li>Keep maintenance and incident logs up to date. </li> <li> <strong>Support Servers and Network Services</strong> </li> <li>Manage services such as DNS, DHCP, VPN, email, and file sharing. </li> <li>Ensure servers and network applications operate efficiently. </li> <li> <strong>Plan Network Expansion</strong> </li> <li>Evaluate future networking requirements. </li> <li>Recommend hardware and software upgrades. </li> <li>Assist in designing scalable network infrastructure. </li> <li> <strong>Ensure Compliance</strong> </li> <li>Follow organizational IT policies and industry standards. </li> <li>Help ensure compliance with security and data protection regulations. </li> <li> <strong>Coordinate with Vendors</strong> </li> <li>Work with internet service providers and equipment vendors. </li> <li>Arrange repairs, replacements, and technical support. </li> <li>Evaluate new networking technologies and solutions.</li> <li> </li> </ul> <br> <p> <strong>Preferred candidate profile</strong> </p> <br> <p> <strong> <u>Qualification : </u> </strong> <br> B. E., (or) B. Sc., Computer Science (4/3 Years Full Time Course).<br> CCNA Certification is Must.<br> <strong> <u>Experience :</u> </strong> <br> Minimum 6 Years Experience in Network Administrator role. Good communication skills / computer skills (MS Office).<br> Hands on experience in networking, routing and switching, Knowledge of best practices around management, control &amp; monitoring of server infrastructure.<br> Experience with firewalls, Internet VPNs remote implementation, troubleshooting, and problem resolution is Mandatory.<br> Ability to set up and configure server hardware. Familiarity with backup and recovery software and methodologies</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Assistant Well Site Leader is responsible for providing clear leadership in every aspect of HSE protection, ensuring safe working practices are used. They assist the Well Site Leader in conducting well operations safely, in accordance with the approved well operations program, and in compliance with the applicable policies/standards/procedures and regulatory requirements within the allocated time/cost with optimal use of resources. They develop required training and on-the-job exposure to develop the skills needed to become a Well Site Leader. </p><ul><li>Organize and lead brief and debrief safety and operations meetings that are related to well operations.</li><li>Lead daily planning meetings and discuss operations with customer representatives, contractors, PL and third-party supervisors.</li><li>Attend daily planning call with supervisors from various parties.</li><li>Update forecast and planned activity to anticipate resource requirements to meet well demands and provide optimum efficiency of services.</li><li>Check that equipment and services comply with the contract.</li><li>Manage proper inventory of tangibles such as, but not limited to, cement, barite, bits, as well as rental equipment, and coordinate with PL OP and third-party suppliers as needed.</li><li>Prepare and ensure material and equipment requests are issued in a timely manner to avoid disruption of operation.</li><li>Ensure that operations are conducted to prevent the risk of well control, stuck pipe, and any other project and operational risks.</li><li>Prepare detailed procedures for specific operations (i.e., running casing, cementing, etc.), including technical and operational calculations as relevant to the well- or rig-site operations (e.g., casing volume.)</li><li>Ensure compliance with Schlumberger policies and Integration PL standards, including standing orders.</li><li>Manage and monitor operations communications to ensure stakeholders are kept informed and service providers possess information they need to perform their services.</li><li>Prepare daily cost estimates based on goods consumed and services provided.</li><li>Participate in operational performance improvements and program changes with the project team.</li><li>Review operational problems and support job incidents, changes, incident response and recovery, including coordination with the individual PLs and key contractors.</li><li>Ensure support to other functional processes and product lines with proper handoffs at key interfaces.</li></ul><p>10+</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a Well Control BOP Technician Maintenance Manager (Residential) with deep drilling land rigs experience for our client in Kuwait. Position Overview: The Well Control BOP Technician Maintenance Manager will lead the maintenance, inspection, testing, and reliability of Blowout Preventer (BOP) systems and associated well control equipment for deep drilling land rig operations in Kuwait. Key Responsibilities: BOP &amp; Well Control Equipment: Lead all maintenance, repair, inspection, testing, and certification activities for BOP systems and well control equipment. Ensure BOP stacks, choke manifolds, accumulator units, hydraulic control systems, and associated equipment remain fully operational. Plan and execute preventive and predictive maintenance programs. Coordinate BOP pressure testing and function testing in accordance with company and regulatory requirements. Troubleshoot mechanical, hydraulic, pneumatic, and electrical failures. Ensure OEM maintenance recommendations are implemented. Maintenance Management: Develop annual and quarterly maintenance strategies for drilling equipment. Manage maintenance planning using CMMS. Optimize equipment reliability and minimize non-productive time (NPT). Manage spare parts inventory and critical equipment availability. Lead root cause failure analysis (RCFA) and corrective action implementation. Control maintenance budgets and contractor performance. Compliance &amp; Safety: Ensure compliance with company HSE standards and applicable regional regulations. Promote a strong well control and process safety culture. Maintain complete maintenance and certification records. Participate in audits, rig inspections, and incident investigations. Ensure emergency response readiness for well control equipment. Leadership: Supervise BOP technicians, mechanics, and maintenance personnel. Mentor and develop technical competency within the maintenance team. Coordinate with Rig Managers, Toolpushers, Drilling Superintendents, OEMs, and third-party service providers. Foster effective collaboration within multicultural work environments. Required Qualifications: Bachelor's Degree or Technical Diploma in Mechanical, Electrical, Mechatronics, or Petroleum Engineering. Experience of 8+years of drilling equipment maintenance and BOP maintenance experience. Minimum 5 years in a maintenance leadership or management role. Extensive experience supporting deep drilling land rigs (3000HP, HPHT and high-capacity drilling operations). Demonstrated success leading maintenance teams in multicultural Middle East operations. Strong working knowledge of international drilling standards and OEM maintenance practices. Excellent understanding of well control equipment reliability and operational risk management. Ability to minimize downtime while maintaining the highest safety standards. Strong communication skills in English. Current well control certification (e.g., IWCF or IADC WellSharp). Strong knowledge of OEM BOP systems and control equipment. Experience using computerized maintenance management systems (CMMS). Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree or Technical Diploma in Mechanical, Electrical, Mechatronics, or Petroleum Engineering.</li><li>Experience of 8+years of drilling equipment maintenance and BOP maintenance experience.</li><li>Minimum 5 years in a maintenance leadership or management role.</li><li>Extensive experience supporting deep drilling land rigs (3000HP, HPHT and high-capacity drilling operations).</li><li>Demonstrated success leading maintenance teams in multicultural Middle East operations.</li><li>Strong working knowledge of international drilling standards and OEM maintenance practices.</li><li>Excellent understanding of well control equipment reliability and operational risk management.</li><li>Ability to minimize downtime while maintaining the highest safety standards.</li><li>Strong communication skills in English.</li><li>Current well control certification (e.g., IWCF or IADC WellSharp).</li><li>Strong knowledge of OEM BOP systems and control equipment.</li><li>Experience using computerized maintenance management systems (CMMS).</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Completion &amp; Well Intervention Engineer specializes in Completions and/or Workovers. The Senior Completion &amp; Well Intervention Engineer is responsible for well engineering and operations support for one or more completion, workover rigs or rigless completion operation including preparing Completion and Workover Programs and procedures and AFE's. This person supervises and mentors Field Engineer Trainees and junior engineers, and attends critical operations at the wellsite as necessary, as a technical advisor. Work with Subsurface and Production to ensure completion and workover plans meet requirements and objectives.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Reviews Completion Basis of Design and performs detailed design checks.</li><li>Review all completion hardware components for compatibility with clearances, setting pressure/turns/weight, and couplings.</li><li>Review regulatory requirements to determine downhole and surface safety equipment requirements and confirm compliance of final equipment configuration.</li><li>Review current well status and well integrity.</li><li>Prepare final well status post completion / workover.</li><li>Prepare completion / workover operations flowchart and contingencies.</li><li>Confirm final hardware design and compatibility (stimulation, treating, production) with TDAS.</li><li>Write program for making up sub-assemblies, drifting, gauging and pressure testing prior to them being RIH.</li><li>Determine required fluid density and composition for formation compatibility to minimize formation damage and manage fluid losses.</li><li>Review and determine compatibility of all slickline and wireline operations required.</li><li>Review fishing tool requirements and alternatives (workover).</li><li>Write program for setting cement plugs e.g. squeezing perforations, and any remedial cementing (workover).</li><li>Review and insure compliance with high pressure treating standards.</li><li>Ensure compliance with IPM Standards for Simultaneous Activities.</li><li>Ensure IPM Barrier Standards is complied with when removing the BOP and installing the Christmas Tree.</li><li>Prepares Completion / Workover Programs and follows the execution of programs technically.</li><li>Prepares Completion / Workover procedures.</li><li>Prepares Completion / Workover time estimates and AFE's.</li><li>Review the program with all parties involved (drilling contractor, completion, wellhead, slickline, etc.).</li><li>Participates in selection and evaluation of service companies, suppliers and equipment.</li><li>Ensures proper communication with relevant parties (client, Product Lines, third parties, etc.).</li><li>Participates in cost control of programs Vs AFE by analyzing solutions.</li><li>Reviews new technology for possible application to project.</li><li>Uses InTouch for best practices, lessons learned and technical alerts.</li><li>Participates in HARC preparation.</li><li>Prepares requests for exemptions to IPM Standards in QUEST.</li><li>Enters SQ RIR's resulting from Completion / Workover operations in QUEST.</li><li>Prepares Management of Change to Completion / Workover programs.</li><li>Forecasts and plans medium and long term needs to meet program requirements.</li><li>Anticipates operational changes and needs and revises plan accordingly.</li><li>Participates in Daily Operations Meetings.</li><li>QA/QC of data in Daily Report.</li><li>Monitors daily progress against plan.</li><li>Monitors actual costs Vs AFE.</li><li>Record and monitor operational NPT trends.</li><li>Evaluates results Vs goals and performance of service companies.</li><li>Initiates engineering corrective action to ensure a process of continuous improvement.</li><li>Performs engineering studies to solve recurring problems (completion hardware problems, etc.).</li></ul>15+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law. _x000D_ Apply Now Share_x000D_<p></p></section>

<p><h4>Building on our past. Ready for the future</h4> <p>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.</p> <h4>About the role</h4> <p>We are seeking an experienced Construction Project Manager to join our team in Ahmadi, Kuwait, supporting the Kuwait Environmental Remediation Program (KERP).</p> <p>You will play a pivotal role in delivering large-scale environmental restoration initiatives. With millions of square meters of contaminated land successfully remediated, this project represents a globally significant effort in sustainable environmental recovery.</p> <p>This is an opportunity to contribute to transforming impacted land into safe, productive ecosystems while leading complex engineering and construction operations.</p> <h4>What you'll do</h4> <strong>Project leadership & delivery</strong><br> <ul> <li>Lead the overall management, coordination, and supervision of assigned remediation projects.</li> <li>Oversee budget development, cost control, and quality assurance to ensure successful project delivery.</li> <li>Manage engineering, procurement, and construction contractors on behalf of the client.</li> <li>Ensure projects are delivered safely, on time, within budget, and in compliance with contractual obligations.</li> <li>Develop and implement the soil remediation strategy for assigned areas, including contracting and execution approaches.</li> </ul> <strong>Client & stakeholder management</strong><br> <ul> <li>Act as the primary technical interface with the client.</li> <li>Build and maintain strong client relationships, ensuring expectations are consistently met.</li> <li>Proactively resolve scope, schedule, and performance issues.</li> </ul> <strong>HSE (Health, Safety & Environment)</strong><br> <ul> <li>Champion a strong HSE culture across all project phases.</li> <li>Ensure OHSE requirements are embedded within design, procurement, and execution.</li> </ul> <strong>Scope & contract management</strong><br> <ul> <li>Ensure compliance with the Worley Project Management Plan (WPMP) and contract requirements.</li> <li>Implement robust change control processes.</li> <li>Support claims mitigation and management strategies.</li> </ul> <strong>Cost & value management</strong><br> <ul> <li>Monitor project costs and forecast outcomes, taking proactive measures to prevent overruns.</li> <li>Promote Value Improving Practices (VIPs) to optimize capital efficiency.</li> </ul> <strong>Quality assurance</strong><br> <ul> <li>Ensure adherence to Worley systems, policies, and procedures.</li> <li>Maintain strong oversight of engineering deliverables and quality standards.</li> </ul> <strong>Team leadership</strong><br> <ul> <li>Lead and motivate multi-disciplinary and global teams.</li> <li>Drive achievement of milestones and key project objectives.</li> </ul> <h4>What you'll have</h4> <p><strong>Education:</strong> Full-time Bachelor’s Degree in Engineering from an accredited university</p> <p><strong>Experience:</strong></p> <ul> <li>Minimum 15 years total experience</li> <li>Minimum 5 years in oil & gas / refinery / petrochemical industries</li> <li>Minimum 5 years in a similar Project Engineering / Construction Management role</li> </ul> <p><strong>Proven experience:</strong></p> <ul> <li>Managing multi-disciplinary construction projects</li> <li>Acting as deputy to a Projects Manager</li> <li>Delivering complex environmental/remediation projects</li> </ul> <p><strong>Demonstrated expertise in:</strong></p> <ul> <li>Soil remediation technologies and execution strategies</li> <li>Engineering and construction management across full project lifecycle</li> </ul> <p><strong>Preferred experience</strong></p> <ul> <li>Experience in PMC (Project Management Consultancy) environments</li> <li>Middle East project experience (highly desirable)</li> </ul> <h4>About you</h4> <p>You are a proactive and results-driven leader with the ability to manage complex projects and diverse teams. You bring:</p> <ul> <li>Strong technical expertise and problem-solving abilities</li> <li>Excellent stakeholder and client engagement skills</li> <li>A structured and strategic approach to project delivery</li> <li>Passion for sustainability and environmental restoration</li> </ul> <p>You will be recognized as a subject matter expert, capable of guiding teams, resolving complex challenges, and delivering high-impact outcomes.</p> <h4>Why join Worley on KERP?</h4> <ul> <li>Work on one of the world’s largest environmental remediation programs</li> <li>Contribute to meaningful sustainability and environmental recovery initiatives</li> <li>Be part of a globally recognized engineering and project delivery organization</li> <li>Lead impactful, large-scale projects with long-term significance</li> </ul> <h4>Moving forward together</h4> <p>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.</p> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.</p> <p>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Assistant Well Site Leader is responsible for providing clear leadership in every aspect of HSE protection, ensuring safe working practices are used. They assist the Well Site Leader in conducting well operations safely, in accordance with the approved well operations program, and in compliance with the applicable policies/standards/procedures and regulatory requirements within the allocated time/cost with optimal use of resources. They develop required training and on-the-job exposure to develop the skills needed to become a Well Site Leader. Organize and lead brief and debrief safety and operations meetings that are related to well operations. Lead daily planning meetings and discuss operations with customer representatives, contractors, PL and third-party supervisors. Attend daily planning call with supervisors from various parties. Update forecast and planned activity to anticipate resource requirements to meet well demands and provide optimum efficiency of services. Check that equipment and services comply with the contract. Manage proper inventory of tangibles such as, but not limited to, cement, barite, bits, as well as rental equipment, and coordinate with PL OP and third-party suppliers as needed. Prepare and ensure material and equipment requests are issued in a timely manner to avoid disruption of operation. Ensure that operations are conducted to prevent the risk of well control, stuck pipe, and any other project and operational risks. Prepare detailed procedures for specific operations (i.e., running casing, cementing, etc.), including technical and operational calculations as relevant to the well- or rig-site operations (e.g., casing volume.) Ensure compliance with Schlumberger policies and Integration PL standards, including standing orders. Manage and monitor operations communications to ensure stakeholders are kept informed and service providers possess information they need to perform their services. Prepare daily cost estimates based on goods consumed and services provided. Participate in operational performance improvements and program changes with the project team. Review operational problems and support job incidents, changes, incident response and recovery, including coordination with the individual PLs and key contractors. Ensure support to other functional processes and product lines with proper handoffs at key interfaces.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Senior Well Engineer is responsible for well engineering on a project and requires both detailed and broad well engineering and operations knowledge including the ability to design wells for a wide range of well types and different rig operations. The Senior Well Engineer is expected to supervise and mentor more junior Well Engineers on a project and requires management skills in addition to technical competency. </p><ul><li>Reviews and approves the Well Proposal and Basis of Design and follows the execution of programs technically. * Reviews and approves Well Programs and End-of-Well reports.</li><li>Reviews and approves well operations procedures e.g. Casing running and cementing.</li><li>Participates in selection and evaluation of service companies, suppliers and equipment.</li><li>Ensures proper communication with relevant parties (client, segments, third parties, etc.).</li><li>Participates in cost control of programs vs AFE by analyzing solutions.</li><li>Assures Technical Integrity of Well Operations programs.</li><li>Participate in well performance reviews to ensure focus on increased ft/day and reduced flat time.</li><li>Reviews and approves project well control briefing.</li><li>Reviews new technology for possible application to project.</li><li>Take active role in Drilling TIC projects as assigned.</li><li>Uses InTouch for best practices, lessons learned and technical alerts.</li><li>Ensures best practices and lessons learned are transferred between all rigs on a project.</li><li>Verify invoices for service companies.</li><li>Deputize for Project Manager as required.</li><li>Participates in HARC's.</li><li>Ensures compliance to IDS Standards and Procedures.</li><li>Reviews requests for exemptions to IDS Standards in QUEST.</li><li>Reviews SQ RIR's resulting from well operations in QUEST.</li><li>Participates in and leads SQ investigations.</li><li>Reviews and approves Management of Change to well programs.</li><li>Forecasts and plans medium and long term needs to meet program requirements.</li><li>Anticipates operational changes and needs and revises plan accordingly.</li><li>Participates in Daily Morning Meetings.</li><li>Evaluates results vs goals and performance of service companies.</li><li>Monitors daily Time/Depth progress and take active part in daily performance calls.</li><li>Monitors daily cost/depth progress vs AFE.</li><li>Reviews performance trends including NPT across all rigs.</li><li>Initiates engineering corrective action to ensure a process of continuous improvement.</li><li>Initiates engineering studies to solve recurring problems (wellbore stability, lost circulation, washouts, etc.).</li></ul><p>15+</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components. A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access. Operationally checks repaired or modified systems for proper operation. Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment. Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks. Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft. Disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders. Ability to become qualified and perform engine runs for the aircraft type they are assigned to support. Ability to read, write, and interpret technical duties is required. Ability to communicate effectively with all levels of employees throughout the organization. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies. Perform other qualified duties as assigned. Minimum Requirements High school diploma or GED equivalent is Required. A valid (FAA) A&amp;P Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired. Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required. Six (6) months of flight line and overhaul &amp; inspection experience is preferred. Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait). A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa. Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training. May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20) Mechanic Pre-employment Medical Requirements: Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. Security Clearance Requirements: Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility. Physical and Additional Qualifications Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to carry, push or pull up to and may exceed 50 pounds. May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Must be able to distinguish color and judge three dimensional depths. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Must have minimum 20/100 near and far vision, correctable to 20/20. Must be capable of living and working in a potentially hostile environment for an extended period. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</li><li>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</li><li>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</li><li>High school diploma or GED equivalent is Required.</li><li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li><li>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li><li>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li><li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment.</li><li>Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li><li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li><li>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</li><li>Must be able to obtain and maintain a US Govt Secret Security Clearance.</li><li>Must be able to obtain and maintain facility credentials and authorization.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Promotes and enforces the implementation of all QHSSE requirements and facilitates implementation and improvement of Barrier Management System (BMS) onboard the rig. Provides guidance and expertise to all personnel on Health, Safety, &amp; Environmental (HSE) standards and assists with related goals and programs. Ensures appropriate dissemination of HSE policies, procedures, and guidance documentation. Maintains a strong presence at the worksite, especially in high-risk, high-activity areas (i.e., deck, drill floor). Approximately 75% of the working day should be spent at the worksite, If this is not being met due to other administrative work loads then it must be raised first to STP then to Rig Manager and the office based QHSSE Focal Point assigned to the rig if not achieved in 1 hitch. Promotes Safety Programs (i.e., ADES 8 keys to incident-free) on the rig, ensuring each employee is aware of their standards and how to apply them. Promotes ADES Awards (i.e., TOFS award) to embed the concept into the rig culture. Assists in the management of the Stop, Hazard, Initiate, Engage, Learn and Demonstrate (SHIELD) program and encourage active participation by undertaking safety performance conversations by all persons on board. Ensures Stop Work Authority (SWA) obligation is understood by all persons on board and exercised promptly. This is integral to the Company s safety culture. The RSO is expected to lead by example and should coach all crew members by helping them intervene and stop work when opportunities arise. Assists the Senior Tool Pusher by monitoring/verifying compliance with control of work systems such as JSA, SOP s, PTW, Isolation, Confined Space, Rescue Planning etc. Complies with, monitor, and effectively contribute to the continuous improvement of BMS, HSE related policies and procedures, and relevant authority regulatory requirements. Identifies and addresses in collaboration with the site operations management by identifying and addressing HSE or noncompliance concerns. Assists with internal/external audit completion, close-out, and tracking. Consults with personnel including safety leaders and department heads on all matters concerning safety. Engages with crews during safety meetings and supervisors meetings; presents topics/findings. Monitors the selection of suitable personal protective equipment (PPE) including performing checks on sizing and suitability. Maintains awareness of substances hazardous to health and the correct storage, use, handling, and PPE requirements. Carries out onboard training and/or books crew training to ensure full compliance with the crew training matrix. Assist third-party trainers as necessary. Assists, monitors, and verifies compliance with the short-service employee (SSE) process to ensure effective implementation and that on-the-job training is being provided to develop the SSEs. Participate and assist the Senior Tool Pusher with rig-based incident reporting and investigations to determine root cause(s). Ensure investigation findings are shared between all crews on board. Assist with and deliver rig orientation and induction (as requested). Liaise with customer representatives and regulatory bodies as necessary. Perform emergency duties as per the rig station bill. Moderates the rig self-verification process.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Education &amp; Experience:</h2><ul><li>Bachelor's degree</li><li>Preferably a minimum of 2 years in an RSO role.</li><li>Previous experience within the drilling industry in an HSE role/position.</li></ul><h2>Skills/Competencies Required:</h2><ul><li>Completion of all required ADES mandatory training requirements.</li><li>Working knowledge of Microsoft Office products (Excel, Word, PowerPoint, etc.).</li><li>Excellent written and verbal communication skills.</li><li>Detail-oriented.</li><li>Analytical thinking and solution Decision-making.</li><li>Performance Management, planning, problem-solving, organizational, and time management skills.</li><li>Inspire Trust.</li></ul><h2>Certifications:</h2><ul><li>As per ADES Training Matrix.</li><li>Formal investigation training certification preferred (i.e., Taproot , Topset or equivalent).</li><li>Recognized HSE training qualification preferred (i.e., NEBOSH, IOSH, OSHA or equivalent).</li><li>Additional QHSSE audit certifications'</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong> <u>Job Summary:</u> </strong> </p> <p>Promotes and enforces the implementation of all QHSSE requirements and facilitates implementation and improvement of Barrier Management System (BMS) onboard the rig. Provides guidance and expertise to all personnel on Health, Safety, &amp; Environmental (HSE) standards and assists with related goals and programs.</p> <p> <strong> <u>Roles &amp; Responsibilities:</u> </strong> </p> <ul> <li>Ensures appropriate dissemination of HSE policies, procedures, and guidance documentation.</li> <li>Maintains a strong presence at the worksite, especially in high-risk, high-activity areas (i.e., deck, drill floor). Approximately 75% of the working day should be spent at the worksite, If this is not being met due to other administrative work loads then it must be raised first to STP then to Rig Manager and the office based QHSSE Focal Point assigned to the rig if not achieved in 1 hitch.</li> <li>Promotes Safety Programs (i.e., ADES 8 keys to incident-free) on the rig, ensuring each employee is aware of their standards and how to apply them.</li> <li>Promotes ADES Awards (i.e., TOFS award) to embed the concept into the rig culture.</li> <li>Assists in the management of the Stop, Hazard, Initiate, Engage, Learn and Demonstrate (SHIELD) program and encourage active participation by undertaking safety performance conversations by all persons on board.</li> <li>Ensures Stop Work Authority (SWA) obligation is understood by all persons on board and exercised promptly. This is integral to the Company s safety culture. The RSO is expected to lead by example and should coach all crew members by helping them intervene and stop work when opportunities arise.</li> <li>Assists the Senior Tool Pusher by monitoring/verifying compliance with control of work systems such as JSA, SOP s, PTW, Isolation, Confined Space, Rescue Planning etc.</li> <li>Complies with, monitor, and effectively contribute to the continuous improvement of BMS, HSE related policies and procedures, and relevant authority regulatory requirements.</li> <li>Identifies and addresses in collaboration with the site operations management by identifying and addressing HSE or noncompliance concerns.</li> <li>Assists with internal/external audit completion, close-out, and tracking.</li> <li>Consults with personnel including safety leaders and department heads on all matters concerning safety.</li> <li>Engages with crews during safety meetings and supervisors meetings; presents topics/findings.</li> <li>Monitors the selection of suitable personal protective equipment (PPE) including performing checks on sizing and suitability.</li> <li>Maintains awareness of substances hazardous to health and the correct storage, use, handling, and PPE requirements.</li> <li>Carries out onboard training and/or books crew training to ensure full compliance with the crew training matrix. Assist third-party trainers as necessary.</li> <li>Assists, monitors, and verifies compliance with the short-service employee (SSE) process to ensure effective implementation and that on-the-job training is being provided to develop the SSEs.</li> <li>Participate and assist the Senior Tool Pusher with rig-based incident reporting and investigations to determine root cause(s). Ensure investigation findings are shared between all crews on board.</li> <li>Assist with and deliver rig orientation and induction (as requested).</li> <li>Liaise with customer representatives and regulatory bodies as necessary.</li> <li>Perform emergency duties as per the rig station bill.</li> <li>Moderates the rig self-verification process.</li> </ul> <p> <strong> <u>Job Requirements:</u> </strong> </p> <p> <strong>Education &amp; Experience:</strong> </p> <ul> <li>Bachelor s degree</li> <li>Preferably a minimum of 2 years in an RSO role.</li> <li>Previous experience within the drilling industry in an HSE role/position. </li> </ul> <p> <strong>Skills/Competencies Required:</strong> </p> <ul> <li>Completion of all required ADES mandatory training requirements. </li> <li>Working knowledge of Microsoft Office products (Excel, Word, PowerPoint, etc.). </li> <li>Excellent written and verbal communication skills. </li> <li>Detail-oriented. </li> <li>Analytical thinking and solution Decision-making. </li> <li>Performance Management, planning, problem-solving, organizational, and time management skills. </li> <li>Inspire Trust.</li> </ul> <p> <strong>Certifications:</strong> </p> <ul> <li>As per ADES Training Matrix.</li> <li>Formal investigation training certification preferred (i.e., Taproot , Topset or equivalent). </li> <li>Recognized HSE training qualification preferred (i.e., NEBOSH, IOSH, OSHA or equivalent). </li> <li>Additional QHSSE audit certifications </li> </ul> <div><br></div></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Well Engineer is responsible for well engineering on a project and requires both detailed and broad well engineering and operations knowledge including the ability to design wells for a wide range of well types and different rig operations. The Senior Well Engineer is expected to supervise and mentor more junior Well Engineers on a project and requires management skills in addition to technical competency. Reviews and approves the Well Proposal and Basis of Design and follows the execution of programs technically. Reviews and approves Well Programs and End-of-Well reports. Reviews and approves well operations procedures e.g. Casing running and cementing. Participates in selection and evaluation of service companies, suppliers and equipment. Ensures proper communication with relevant parties (client, segments, third parties, etc.). Participates in cost control of programs vs AFE by analyzing solutions. Assures Technical Integrity of Well Operations programs. Participate in well performance reviews to ensure focus on increased ft/day and reduced flat time. Reviews and approves project well control briefing. Reviews new technology for possible application to project. Take active role in Drilling TIC projects as assigned. Uses InTouch for best practices, lessons learned and technical alerts. Ensures best practices and lessons learned are transferred between all rigs on a project. Verify invoices for service companies. Deputize for Project Manager as required. Participates in HARC's. Ensures compliance to IDS Standards and Procedures. Reviews requests for exemptions to IDS Standards in QUEST. Reviews SQ RIR's resulting from well operations in QUEST. Participates in and leads SQ investigations. Reviews and approves Management of Change to well programs. Forecasts and plans medium and long term needs to meet program requirements. Anticipates operational changes and needs and revises plan accordingly. Participates in Daily Morning Meetings. Evaluates results vs goals and performance of service companies. Monitors daily Time/Depth progress and take active part in daily performance calls. Monitors daily cost/depth progress vs AFE. Reviews performance trends including NPT across all rigs. Initiates engineering corrective action to ensure a process of continuous improvement. Initiates engineering studies to solve recurring problems (wellbore stability, lost circulation, washouts, etc.).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>15+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Summary: </b>Superior authority at rig location for the operational safety, efficiency, drilling integrity and client relations, implementation and upholding of safety to prevent injuries, preserve life, protect equipment while maintaining compliance with environmental requirements. Provide onboard leadership and direction for department leaders, for meeting the client drilling program requirements while considering company procedures and allocated rig budget. Roles &amp; Responsibilities: Rig Operations: Organize and supervise the activities of drilling, moving and maintenance departments of the drilling unit to effectively carry out management and command functions in compliance with company procedures. Communicates with the Rig Manager in reviewing and discussing the client s projected well program before operations commence and throughout the well as necessary to stay abreast of pertinent operational activities and time factors. Ensure well programs, schedules are well known to the drilling crew and adequate written instructions are given and that necessary rig procedures, including JSA and PTW are prepared on time and with good quality for the actual operations. Ensure that necessary Management of Change or Deviation is approved in Synergi prior to operation starts. Manage &amp; review the execution of the drilling program in coordination with Client Representative and rig department heads through the daily operations plans (IADC logs). Make all decisions in conjunction with departments heads regarding utilization of equipment, making sure the rig and support equipment is properly maintained and fit for purpose. Ensure the availability of the optimum quantity of rig supplies, parts, materials, fuel, lubricants, potable water for the drilling program are onboard. Determines when to cease resume operations, as per company procedures in cooperation with the Rig Manager. Plan, approve, and supervise rig activities such as equipment maintenance, preventive maintenance program, repairs, daily maintenance of drilling fluids, etc. Ensure all activities are coordinated with minimal loss of time or effort. Overseeing that space-out drawings are correct and are posted in the drillers cabin. Overseeing that post-jarring sheet are filled out and understood by night Tool pusher and driller. Rig Move: Plan all related rigs move activities, equipment, supplies, personnel in compliance with the Rig move Procedures. Assesses the current and new location, considering factors such as safety, lifting equipment availability at location, preparation for rig-up operations, Supervise the Rig move team during rigging down and rigging up activities to ensure they are followed efficiently and safely. Management of Major Emergencies: Acts as the command team leader during emergency situations, through leading the Rig s emergency response teams as detailed on the Emergency Plan and Company Procedures. Ensure that all personnel are instructed in the procedures to be adopted in the case of an emergency. Ensure that Well Control and general safety drills are held and recorded in accordance with Company requirements. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Client Management: Act as the primary client contact at location regarding all service provision related matters. Communicate regularly with the client representative at location and ensure that each party s priorities, plans, rig progress and operational problems are clearly communicated and understood to continually promote good relations with the client. Represents the Company professionally, upholding the confidentiality of the Company and client business both during and outside of work hours. Develops and maintains positive working relationships with other department heads, supervisors, operator's representatives, subcontractors, and all personnel on the rig. Reporting and Documentation: Maintains proper logs and records, promptly submitting required reports as per company protocols and regulatory standards. Prepare accurate and timely reports, including daily drilling reports, equipment status reports, and incident reports to document drilling activities and operational performance. Review all operational/technical bulletins, communicate pertinent points to crew members and implement all directives as required. Assist management in initiating, monitoring, and recording all maintenance and repairs work in collaboration with maintenance department. People Management &amp; Development: Establishes and maintains good working relationships with the crew, clients, and third-party personnel, promoting effective collaboration between departments. Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work. Mentor, develop and train their team to ensure safe and effective operations. Identifies opportunities for skill and career advancement, works to support the professional growth of their team. Ensure their team receives the necessary required training in line with the training matrix to perform their duties safely and effectively through on-the-job training, classroom training, and participation in safety drills and exercises. Support, promote and actively participate in ADES s Competency Assurance Program for their team. Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive the ADVANCE process to formalize a performance management culture. Oversees the catering staff, ensuring proper hygiene is practiced with respect to the quality, storage and preparation of food, cleanliness of the kitchen and accommodation, hospital upkeep and medical care, suitable drinking water including suitable laundry facilities to maintain clean linen and towels.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Education &amp; Experience</b>: Minimum educational level required: High School or Vocational/Technical Qualification. Minimum (8) years of working experience in Land drilling and workover operations with renowned drilling contractors with a career history showing time served as Driller, Tool pusher. Minimum previous experience of (3) years as a Night Tool pusher in a land drilling operation. Skills/Competencies Required: Fluent in English (written &amp; spoken). PC literate in Microsoft Office. Business &amp; Financial Acumen, Leadership, Situation Awareness, Communication, Team Management, Performance shaping factors stress and fatigue, Problem Solving, Agility &amp; Pace. Certifications: As per ADES Training Matrix. Valid Well Control (Well Sharp / IADC) Certificate</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supervise and control the entire drilling operation activities during the night shift, ensuring the successful completion of the well and drilling activities while liaising closely with Senior Tool Pusher or deputize for the Senior Tool Pusher when required. At all times considering the safety of personnel, the environment, and equipment to maximize drilling operation efficiency.</p><p>Ensures the safety of personnel, equipment, and the efficiency of operations on the drill floor and other drilling operation associated areas. Plans and schedules all drilling and associated activity. Directs personnel towards achieving optimum job performance according to the client s requirements. Ensures any deviation from client well plan (Game Plan) is approved by STP, and that Client representative has documented in written form, and that necessary management of change or deviation is approved in Synergi prior to operation starts. Consult with the STP and Client s Representative regarding the progress of the Drilling program and associated operations, keeping the driller informed about the ongoing drilling program objectives and communicating any changes in plans. Ensure that space-out drawings are correct and are posted in the drillers cabin. Overseeing that post-jarring sheet are filled out and understood by the driller. Relieve the Driller at the Driller s console as operational requirement demands. Ensures that all necessary equipment is ready for the next phase of the Drilling / Workover program and that necessary rig procedures, including JSA and PTW, are prepared on time and with good quality for the actual operations. Assists &amp; supervises drilling crew at the location at all relevant times, ensuring circulating time is sufficient and the well is stable on trips, when the BHA is being worked and whenever there is a hole problem. Operates the drilling unit with strict adherence to company Drilling &amp; Well Control manuals, by reviewing and approving all drilling related work permits.</p><p>Ensure that well control requirements are in place according to operational requirements - assist in supervising well killing operations in any well control situation. Plans &amp; monitors comprehensive well control parameters to proactively identify any signs of well control issues for early detection and swift response. Maintains and regularly tests well control equipment, in accordance with Company s and Client s requirement, ensuring its readiness and effectiveness in critical situations. Perform all well control calculations (i.e., mud weight increase, initial and final circulating pressures, number of strokes, etc.).</p><p>To be part of the Rig s Emergency Response Team as detailed in the Emergency Plan and Company Procedures. Ensure that all personnel are instructed in the procedures to be adopted in the case of an emergency. Ensure that Well Control and general safety drills are held and recorded in accordance with Company requirements.</p><p>Assist STP in ensuring the location has sufficient stock of parts and materials to perform drilling and associated operations as per contractual requirements. Ensure planned maintenance and repair of drilling equipment including draw-works, mud pumps, top drive, rotary table, and BOP are completed and documented to ensure optimum condition and proper availability of required tools. Responsible for housekeeping standards in all drilling areas, sack store and mud pump room.</p><p>Support STP in planning all related rigs move activities, equipment, supplies, personnel in compliance with the Rig move Procedures. Assesses the current and new location, considering factors such as safety, lifting equipment availability at location, preparation for rig-up operations, Supervise the Rig move team during rigging down and rigging up activities to ensure they are followed efficiently and safely.</p><p>Develops and maintains positive working relationships with other department heads, supervisors, operator's representatives, subcontractors, and all personnel on the rig. Responds to client requests and needs concerning materials, equipment, and personnel after getting adequate management approval.</p><p>Maintains proper logs and records, promptly submitting required reports as per company protocols and regulatory standards. Prepare accurate and timely reports, including daily drilling reports, equipment status reports and incident reports, to document drilling activities and operational performance. Review all operational/technical bulletins, communicate pertinent points to crew members and implement all directives as required. Assist STP in initiating, monitoring, and recording all maintenance and repairs work in collaboration with maintenance department.</p><p>Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work. Mentor, develop and train their team to ensure safe and effective operations. Identifies opportunities for skill and career advancement, works to support the professional growth of their team members. Ensure their team receives the necessary required training to perform their duties safely and effectively through on-the-job training, classroom training and participation in safety drills and exercises. Support, promote and actively participate in ADES s Competency Assurance Program for their team. Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive ADVANCE process to formalize a performance management culture.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum education level required: High School or Vocational/Technical Qualification.</p><p>Minimum (8) years of working experience in land drilling and workover operations with contractors with a career history showing time served as Assistant Driller, Driller, and Tool pusher.</p><p>Must have working experience on Onshore rigs.</p><p>Fluent in English (written &amp; spoken).</p><p>PC literate in Microsoft Office</p><p>Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids.</p><p>Leadership, Situation Awareness, Communication, Teamwork, Performance shaping factors stress and fatigue, inspecting work.</p><p>Regularly climbing (stairs, ladders).</p><p>Regularly bending, twisting, and standing.</p><p>Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat etc.).</p><p>Ability to work on day/night shifts.</p><p>As per ADES Training Matrix.</p><p>Valid Well Control (Well Sharp / IADC) Certificate.</p><p></p></section>