مطلوب مهندسين بترول

<p>We are seeking a knowledgeable and proactive Environmental Engineer to ensure that all marine construction, offshore, and infrastructure projects comply with environmental regulations and sustainability standards. The ideal candidate will be responsible for managing environmental impact assessments, monitoring programs, permitting, and providing technical guidance to project teams to minimize environmental risks. Key Responsibilities: • Develop, implement, and monitor Environmental Management Plans (EMP) and Construction Environmental Management Plans (CEMP) for marine and offshore projects • Conduct Environmental Impact Assessments (EIA) for project activities, identifying potential environmental impacts and developing mitigation measures • Ensure all project activities comply with local environmental laws, regulations (e.g., Ministry of Environment, EPA), and international standards (ISO 14001:2015) • Coordinate with regulatory authorities for environmental permits, licenses, and approvals including Consent to Operate (CTO) • Monitor and manage the impact of marine construction activities on ecosystems including coral reefs, mangroves, and marine fauna • Conduct water and sediment quality testing before, during, and after marine construction • Oversee waste management generated from marine construction projects including hazardous and non-hazardous waste • Participate in Environmental Risk Assessment workshops (ENVID) and maintain the Environmental Risk Register (ERR) • Review and endorse environmental studies including baseline surveys, modeling studies, and assessment reports • Provide technical environmental support across design, fabrication, construction, installation, and commissioning phases • Monitor contractor compliance with environmental requirements through audits, inspections, and performance reviews • Track and report environmental performance data including air emissions, water quality, waste management, and greenhouse gases • Develop and review key environmental plans including Waste Management Plans (WMP) and Oil Spill Response Plans • Liaise with clients, subcontractors, and regulatory bodies on environmental matters • Provide environmental training and awareness to project teams and contractors • Stay updated on environmental regulations and industry best practices</p><p>Qualifications & Experience: • Bachelor’s degree in Environmental Engineering, Chemical Engineering, Environmental Science, or related field • Minimum 5-8 years of experience in environmental engineering within marine construction, offshore, or oil & gas industries • Experience with offshore greenfield and brownfield projects is highly preferred • Strong knowledge of environmental regulations, permitting processes, and compliance requirements in the GCC region or relevant jurisdiction • Experience in Environmental Impact Assessment (EIA) across project lifecycles • Familiarity with ISO 14001:2015 environmental management standards • Proficiency in environmental monitoring and reporting tools • Valid offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., IEMA, IAIA) is an advantage • Postgraduate degree in Environmental Engineering is preferred Required Skills: • Strong knowledge of environmental laws, regulations, and industry standards • Experience in environmental permitting and regulatory liaison • Understanding of marine and coastal ecosystems and environmental impact mitigation • Excellent analytical and problem-solving abilities • Strong communication and report writing skills • Ability to work independently and manage multiple priorities • Attention to detail for compliance and documentation • Team collboration with project, engineering, and HSE teams</p>

<p><h4>About us</h4> <p>Zeal Group is an award-winning FinTech organisation offering a variety of products. Established in 2017, we have rapidly expanded to a team of over 700 employees globally. Traze is a subsidiary brand of Zeal Group.</p> <p>Our headquarters are in London and we have offices spanning Europe, Asia, North and South Africa, the Middle East, South America, and Cyprus is the home of our Technology Hub.</p> <p>We are a product and people focused company who are passionate about growth, innovative technology, and collaboration.</p> <h4>Responsibilities</h4> <ul> <li>Build and develop relationships with potential clients and partners who may have clients interested in trading multi-asset products such as gold, oil, FX, and cryptocurrencies.</li> <li>On-board IBs and help them increase accounts, deposits, and revenues.</li> <li>Identify and target known money managers and IBs in the MENA region.</li> <li>Organically build a book of business through relationships in and outside the market targeting potential IBs from multiple industries.</li> <li>Determine customers' trading needs and prepare proposals to sell services that address these needs.</li> <li>Cross-sell retail clients who meet the IB threshold to grow their business and walk them through the client growth life cycle.</li> <li>Stay up to date on market news and trends in FX, commodities, stocks, and indices.</li> <li>Advise on trading strategies, options, and risk management strategies.</li> <li>Explain industry terms or trading practices to clients.</li> <li>Attend industry and company events to source own potential clients as directed by management.</li> <li>Achieve sales targets.</li> <li>Contact prospective or existing customers to discuss their queries and requirements.</li> <li>Develop sales presentations or proposals to explain service specifications.</li> <li>Maintain customer records by using the CRM and logging communication.</li> <li>Receive and follow-up on clients funding, volume, and new account activations.</li> </ul> <h4>Requirements</h4> <p><strong>Academic qualification requirement:</strong></p> <ul> <li>B.Sc. degree from any discipline</li> <li>4+ years of extensive experience in Forex/CFD brokerage sales environments</li> </ul> <p><strong>Professional key knowledge area requirement:</strong></p> <ul> <li>Strong understanding of FX, commodities, indices, and equity markets</li> <li>A hunter mindset; you chase targets, not titles</li> <li>Excellent communication and negotiation skills across cultures and regions</li> <li>Strategic thinking paired with hands-on execution</li> <li>Financial markets knowledge in FX, stocks, commodities, technical and fundamental analysis</li> </ul> <h4>Skills & competencies</h4> <ul> <li>Strong relationship management and networking skills</li> <li>Selling skills</li> <li>Communication skills</li> <li>Customer orientation</li> <li>Learning flexibility</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Duties and Responsibilities Project Planning and Design Prepare and review civil and structural engineering designs, drawings, and calculations. Develop site grading, drainage, roads, foundations, and structural layouts. Coordinate with mechanical, electrical, piping, and process engineering teams. Review contractor designs and engineering deliverables. Construction Management Supervise civil construction activities on site. Monitor construction progress and ensure compliance with project schedules. Inspect excavation, concrete, steel structures, paving, and foundation works. Verify that construction follows approved drawings, specifications, and procedures. Quality Assurance and Quality Control (QA/QC) Ensure compliance with project quality standards and specifications. Review material test reports and inspection records. Conduct site inspections and witness testing activities. Address non-conformance reports (NCRs) and corrective actions. Health, Safety, and Environment (HSE) Ensure all civil works comply with safety regulations and company HSE policies. Participate in risk assessments and toolbox meetings. Promote safe work practices on construction sites. Identify and mitigate construction hazards. Contract and Cost Control Review contractor invoices and progress claims. Assist in preparing cost estimates and budgets. Evaluate variation orders and change requests. Monitor material quantities and project expenditures. Coordination and Communication Liaise with clients, consultants, subcontractors, and regulatory authorities. Attend project meetings and provide technical support. Prepare engineering reports, progress reports, and technical documentation. Site Investigation and Survey Review geotechnical reports and soil investigations. Verify survey data and site measurements. Assess site conditions affecting construction activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements Education Bachelor's Degree in Civil Engineering. Master's degree is an advantage for senior positions. Professional Experience Typically 315+ years of experience, depending on the position level. Experience in oil &amp; gas, petrochemical, refinery, LNG, pipeline, or industrial construction projects. Familiarity with EPC (Engineering, Procurement, and Construction) projects. Technical Skills Structural and foundation design. Reinforced concrete and steel structure design. Site development, roads, drainage, and earthworks. Knowledge of construction methods and materials. Reading and interpreting engineering drawings and specifications. Software Knowledge AutoCAD. Civil 3D. STAAD.Pro. ETABS. SAP2000. Microsoft Project or Primavera P6. Microsoft Office Suite.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The Common Support Equipment Technician diagnoses, repairs, and maintains Common Support Equipment (CSE). Responsibilities include troubleshooting malfunctions, performing scheduled and unscheduled maintenance, analyzing maintenance trends, and documenting actions using automated systems. Technicians utilize various diagnostic tools, such as multi-meters and oscilloscopes, to repair mechanical and electronic systems. They also handle fluids, conduct corrosion treatments, manage hazardous materials, and prepare CSE for deployment. The role includes operating and servicing support equipment and tow vehicles, while adhering to safety, Tool Control, and Foreign Object Damage prevention standards at all times. Responsibilities SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times. ESSENTIAL FUNCTIONS + Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. + Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. + Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. + Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. + Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. + Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. + Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. + Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. + Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. + Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. + Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. + Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. + Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). + Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. + Conduct off station maintenance when required. + When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Qualifications MINIMUM REQUIREMENTS / QUALIFICATIONS + Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language. + Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration. + Graduation from a standard four (4) year high school or equivalent (GED). + Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. + Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures). + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing -“I” Level &amp; “O” Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required. + Have a strong knowledge base of Intermediate Level Maintenance business procedures. + Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver’s license. + Must have an in-depth knowledge of technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must have a working knowledge (input and extract data) of computers. + Must be willing and able to work with job required hazardous materials. + Must be willing and able to conduct specialty on the job training.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Common Support Equipment Technician diagnoses, repairs, and maintains Common Support Equipment (CSE). Responsibilities include troubleshooting malfunctions, performing scheduled and unscheduled maintenance, analyzing maintenance trends, and documenting actions using automated systems. Technicians utilize various diagnostic tools, such as multi-meters and oscilloscopes, to repair mechanical and electronic systems. They also handle fluids, conduct corrosion treatments, manage hazardous materials, and prepare CSE for deployment. The role includes operating and servicing support equipment and tow vehicles, while adhering to safety, Tool Control, and Foreign Object Damage prevention standards at all times.</p><p>SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times.</p><p>ESSENTIAL FUNCTIONS Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conduct off station maintenance when required. When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS).</p><p>PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language.</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration.</li><li>Graduation from a standard four (4) year high school or equivalent (GED).</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures).</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing - I Level &amp; O Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required.</li><li>Have a strong knowledge base of Intermediate Level Maintenance business procedures.</li><li>Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver s license.</li><li>Must have an in-depth knowledge of technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must have a working knowledge (input and extract data) of computers.</li><li>Must be willing and able to work with job required hazardous materials.</li><li>Must be willing and able to conduct specialty on the job training.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Quality Assurance &amp; Quality Control Engineer<br><br><p><b><i>Lead Quality Assurance &amp; Quality Control Engineer</i></b></p><br><br><p><b>Division /Project </b></p><br><br><br><p>KBR’s Sustainable Technology Solutions (STS) group is looking for <b><i>a Lead Quality Assurance &amp; Quality Control Engineer </i></b>for <span>5-year</span> PMC contract for the supply of Programme Management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p><br><br><p>The contract aims to provide project management, co-ordination, planning, design, engineering, construction management, contracting, procurement, project controls and other services for construction of new oil field facilities, up-grading of existing facilities, and transfer of technology.</p><br><br><br><p><b>Primary Objectives</b></p><br><br><br><p>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets Corporate, location and contractual requirements.</p><br><br><p>Manage project service and product verification and inspection the project consistent with criticality assessments and contractual and regulatory obligations.</p><br><br><p>Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits and project quality reporting and review.</p><br><br><br><p><b>Qualifications including Required Education, Experience, &amp; Skills</b></p><br><br><ul><li><b>Bachelor in Engineering Degree</b></li><li><b>12 years total post graduation experience </b></li><li><b>8 years post graduation experience in oil and gas projects</b></li><li><b>5 years post graduation experience in same designation</b></li><li><b>Thorough understanding of the principles and practice of Quality Management and the implementation and improvement of management systems.</b></li><li><b>Practical experience of plant and vendor inspection of all types of mechanical equipment typically required at oil &amp; gas installations, both on-shore and off shore. </b></li><li><b>Ability to develop, maintains, update in – house technical standards &amp; specifications.</b></li><li><b>Communication skills – verbal, written – to report standard and presentation skills.</b></li><li><b>Demonstrable capabilities in planning and organizing projects and activities to meet Project requirements e.g. quality planning and resourcing for projects to ensure they are suitably resourced with sufficient and capable quality management expertise.</b></li><li>Experience in managing a team of quality practitioners.</li><li>Fully conversant with NDE requirements and sour environments.</li><li>Excellent written, coordination and verbal communication skills. - Ability to develop, update and maintain in-house technical standards &amp; specifications.</li><li>Familiarity with ISO 9000 and 14000 Series and international standards relevant to oil and gas industry.</li></ul><br><p><b>Responsibilities</b></p><br><br><br><ul><li>Work with the HSE /QA QC Manager and the Project Management Team to ensure:</li><li>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS) consistent with specific location, regulatory and contractual requirements</li><li>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures and reference materials</li><li>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory and contractual obligations.</li><li>Effective planning and implementation of design control, verification, validation and review activities.</li><li>Effective implementation and coordination of vendor assessment and inspection activities.</li><li>Effective implementation and verification of construction inspection and testing activities.</li><li>Effective implementation of non-conformance, corrective action, and preventive action management processes.</li></ul><br><ul><li>Establishment of an effective risk-based audit program.</li><li>Effectiveness of Project Management Review Programs including collection analysis and reporting of project performance measures.</li></ul><br><ul><li>Participate in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments.</li><li>Facilitate the implementation of existing and new company processes and capability enhancements across the Project Operations.</li><li>Facilitate independent review/certification of Project Quality Management Systems in line with company and customer requirements.</li></ul><br><ul><li>Ensure that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are being identified and managed by the Project Team effectively.</li></ul><br><br><br><p><b>Decarbonization – Energy Transition – Sustainability </b></p><br><br><p><b>Belong. Connect. Grow</b></p><br><br><br><br><br> </div>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Primary objective</h4> <p>Development and management of construction and completions capability across PMC projects ensuring that design integrity is not compromised while managing the department in the execution of the process. Managing and executing the projects according to the field contract.</p> <h4>What you will do:</h4> <ul> <li>Promote and drive the involvement of construction in areas of technical design, schedule, preliminary execution planning, and cost estimating.</li> <li>Develop and maintain a familiarity and appreciation of capability and ongoing workload of construction’s support providers/contractors.</li> <li>Develop and maintain functional responsibility for all construction and completions personnel.</li> <li>Technical competence of construction personnel.</li> <li>Forecast requirement for construction engineering resources and allocate those resources.</li> <li>Prepare man hour estimates to perform project tasks.</li> <li>Promote cost reduction and productivity enhancing initiatives.</li> <li>Prepare weekly progress and expenditure reports on a project specific basis.</li> </ul> <h4>What you will bring:</h4> <ul> <li>Familiar with management of heavy lifting equipment and large earth moving activities.</li> <li>Demonstrated experience of working in the oil & gas industry. Must have proven track record in leading a team.</li> <li>Pre-commissioning and commissioning and performance testing experience.</li> <li>Experienced in the specification, evaluation and documentation of equipment.</li> <li>Work is performed in accordance with broad technical guidelines and with minimal supervision.</li> <li>Ability to work to tight deadlines and prioritization of work to achieve them.</li> </ul> <h4>Qualifications / experience</h4> <ul> <li>Full-time bachelor’s degree in engineering from an accredited university.</li> <li>Minimum 10 years of total experience post graduate studies.</li> <li>Minimum 5 years of experience in the oil & gas, refinery, or petrochemical industry.</li> <li>Minimum 5 years of recent experience as a lead construction engineer or equivalent.</li> </ul> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for an HSE Engineer for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <ul> <li>Coordinate implementation of the KOC PMC safety policies, HSE management system, and project-specific HSE management plans as they apply to the project.</li> <li>Ensure that the site complies with the relevant HSE legislation and KOC HSE requirements.</li> <li>Develop and implement the project HSE management system.</li> <li>Develop and maintain statistical data for the project.</li> <li>Prepare reports as required for the HSEQ manager.</li> </ul> <h4>Responsibilities</h4> <ul> <li>Monitor the EPC contractor HSE management system and provide advice and assistance to EPC HSE managers to ensure consistent compliance and reduce risk to project employees and the environment.</li> <li>Ensure the EPC contractors develop, implement, and maintain a specific project risk management plan.</li> <li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented timely in accordance with KOC expectations.</li> <li>Provide advice and guidance to the EPC contractor management team on HSE issues through interpretation of KOC policies and statutory requirements.</li> <li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety and training programs to provide a basis for further health and safety activities and highlight trends for future action.</li> <li>Monitor compliance with all Kuwait legislative requirements including dissemination of information to PMC and EPC managers and employees regarding amendments or additions to requirements as they come into effect.</li> <li>Review EPC contractor safety management system and advise on required changes.</li> <li>Develop and maintain professional relationships with KOC, regulatory bodies, and EPC contractors to foster the professional image of KBR.</li> <li>Visit the project site regularly to ensure interest and awareness of HSE is maintained; conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken.</li> <li>Proactively visit site and, with the EPC contractor, implement safety measures to promote and ensure safe work practices.</li> <li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow-up on findings.</li> <li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing work to maintain a safe working environment.</li> <li>Assist EPC subcontractor safety advisors and site management in the development and revision of specific site safety programmes.</li> <li>Maintain an HS&E audit and assessment program for the location.</li> <li>Carry out regular inspections of work areas with the respective EPC contractor line manager and HSE representative and prepare reports.</li> <li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters, etc.</li> <li>Assist EPC contractor line management and construction supervisors in accident investigation processes and report accordingly.</li> <li>Develop and implement safety initiatives to continually improve, achieve, and maintain stated safety performance and objectives.</li> <li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors.</li> <li>Monitor the availability and use of safety apparel and equipment.</li> <li>Provide advice to EPC subcontractor supervision on the development of project-specific procedures and Job Safety Analysis (JSA) training.</li> <li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls.</li> <li>Ensure all lines of communication on HSE matters remain open and effective between all parties, particularly KOC, KBR, EPC contractors, and their subcontractors.</li> </ul> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor’s degree in engineering.</li> <li>Minimum 8 years total post-graduation experience.</li> <li>Minimum 5 years oil and gas post-graduation experience.</li> <li>Minimum 5 years’ experience in an HSE engineer role.</li> <li>Practical experience with HSE management systems, reporting, and audit procedures.</li> <li>Ability to develop, update, and maintain in-house procedures.</li> <li>Must be conversant with local and international safety standards and norms.</li> <li>Practical experience of design, construction, commissioning, and maintenance aspects of oil and gas installations.</li> <li>Decarbonization, energy transition, and sustainability knowledge.</li> </ul> <p><strong>Belong. Connect. Grow.</strong></p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for an experienced Mechanical Lifting SME to join our team on a major field development project in North Kuwait.This is a senior, high-accountability role embedded within a large-scale integrated drilling and facilities operation, with direct client interface on all lifting and regulatory matters.</p><p><strong>What the role covers:</strong></p><ul><li>End-to-end ownership of the project Mechanical Lifting Programme: planning, lift plan review and approval, lift categorisation, equipment register management, and execution oversight of Critical and Non-Routine lifts</li><li>Direct interface with the client Lifting Authority for plan submission and regulatory compliance</li><li>Competency assessment and supervision of lifting crews across multiple simultaneous drilling contractors</li><li>Audit and compliance management across all project phases, from pad construction through well testing and production</li><li>LEEA Appointed Person certification (or internationally recognised equivalent)</li><li>Minimum 8 years in dedicated ML supervisory or SME roles in onshore O&amp;G environments</li><li>Demonstrated experience managing lifting programmes in multi-contractor setting</li><li>Candidates with additional experience and credentials in Dropped Objects Prevention programme management and DROPS system auditing will stand out</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>LEEA Appointed Person certification (or internationally recognised equivalent)</p><p>Minimum 8 years in dedicated ML supervisory or SME roles in onshore O&amp;G environments</p><p>Demonstrated experience managing lifting programmes in multi-contractor setting</p><p>Candidates with additional experience and credentials in Dropped Objects Prevention programme management and DROPS system auditing will stand out</p><p></p></section>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead Quality Assurance & Quality Control Engineer for a 5-year PMC contract for the supply of Programme Management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <p>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets corporate, location, and contractual requirements.<br> Manage project service and product verification and inspection consistent with criticality assessments and contractual and regulatory obligations.<br> Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits, and project quality reporting and review.</p> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor in Engineering Degree</li> <li>12 years total post graduation experience</li> <li>8 years post graduation experience in oil and gas projects</li> <li>5 years post graduation experience in same designation</li> <li>Thorough understanding of the principles and practice of Quality Management and the implementation and improvement of management systems</li> <li>Practical experience of plant and vendor inspection of all types of mechanical equipment typically required at oil & gas installations, both onshore and offshore</li> <li>Ability to develop, maintain, and update in-house technical standards and specifications</li> <li>Communication skills – verbal and written – to report standards and presentation skills</li> <li>Demonstrable capabilities in planning and organizing projects and activities to meet project requirements, e.g. quality planning and resourcing for projects to ensure they are suitably resourced with sufficient and capable quality management expertise</li> <li>Experience in managing a team of quality practitioners</li> <li>Fully conversant with NDE requirements and sour environments</li> <li>Excellent written, coordination, and verbal communication skills</li> <li>Familiarity with ISO 9000 and 14000 Series and international standards relevant to oil and gas industry</li> </ul> <h4>Responsibilities</h4> <p>Work with the HSE / QA QC Manager and the Project Management Team to ensure:</p> <ul> <li>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS) consistent with specific location, regulatory, and contractual requirements</li> <li>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures, and reference materials</li> <li>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory, and contractual obligations</li> <li>Effective planning and implementation of design control, verification, validation, and review activities</li> <li>Effective implementation and coordination of vendor assessment and inspection activities</li> <li>Effective implementation and verification of construction inspection and testing activities</li> <li>Effective implementation of non-conformance, corrective action, and preventive action management processes</li> <li>Establishment of an effective risk-based audit program</li> <li>Effectiveness of Project Management Review Programs including collection, analysis, and reporting of project performance measures</li> <li>Participation in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments</li> <li>Facilitation of the implementation of existing and new company processes and capability enhancements across the Project Operations</li> <li>Facilitation of independent review/certification of Project Quality Management Systems in line with company and customer requirements</li> <li>Ensuring that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are identified and managed by the Project Team effectively</li> </ul> <h4>Decarbonization – Energy Transition – Sustainability</h4> <p>Belong. Connect. Grow.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p></p></section>

<p><h4>Energy Jobline Overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job Summary</h4> <p>We are seeking a highly experienced network engineer to be based in Kuwait on a contract hire basis. The successful candidate will be responsible for the design, deployment, optimization, and administration of high performance, low latency enterprise networks in a complex, mixed vendor environment. This role requires deep hands-on expertise in advanced routing technologies and enterprise scale network infrastructure.</p> <h4>Key Responsibilities</h4> <li>Design, deploy, and maintain high performance, low latency enterprise network infrastructures</li> <li>Lead network architecture design for complex, multisite environments</li> <li>Implement and troubleshoot advanced routing protocols in mixed environments: <br>OSPF <br>BGP <br>ISIS </li> <li>Perform network optimization, capacity planning, and performance tuning</li> <li>Ensure high availability, resilience, and security of network services</li> <li>Diagnose and resolve complex network issues at L2/L3 levels</li> <li>Collaborate with infrastructure, security, and application teams during project delivery</li> <li>Produce and maintain detailed network documentation, diagrams, and standards</li> <li>Support network migrations, upgrades, and technology refresh initiatives</li> <li>Provide technical guidance and mentorship to junior engineers where required</li> <li>Ensure compliance with enterprise IT policies, standards, and best practices</li> <h4>Mandatory Requirements (Must Have)</h4> <p><strong>Experience</strong></p> <li>Minimum 10+ years of hands-on experience in network administration and engineering</li> <li>Proven experience designing and deploying enterprise scale, high performance networks</li> <p><strong>Education</strong></p> <p>Bachelor’s degree in one of the following fields:</p> <li>Information technology</li> <li>Information systems</li> <li>Computer science</li> <li>Communications engineering</li> <li>Or a closely related discipline</li> <p><strong>Certifications</strong></p> <li>Valid CCIE Enterprise Infrastructure certification (mandatory)</li> <p><strong>Technical Expertise</strong></p> <li>Strong, hands-on knowledge of: <br>Advanced routing protocols: OSPF, BGP, ISIS </li> <li>Enterprise routing and switching environments</li> <li>Network performance optimization and low latency design principles</li> <li>Experience working in mixed vendor network environments</li> <h4>Nice to Have (Advantageous)</h4> <li>Experience in service provider or large enterprise environments</li> <li>Exposure to data center networking and high availability architectures</li> <li>Knowledge of network security concepts and integration with security platforms</li> <li>Experience supporting mission critical or 24/7 operational networks</li> <li>Prior experience working in the Middle East region</li> <h4>Soft Skills & Competencies</h4> <li>Strong analytical and troubleshooting skills</li> <li>Ability to work independently in a contract based role</li> <li>Excellent documentation and communication skills</li> <li>Proactive, detail oriented, and solution focused mindset</li> <li>Ability to perform under pressure in complex operational environments</li></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p> <p> </p> <p> <strong>Your Development Journey</strong> </p> <p>You ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: </p> <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience </li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training </li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients </li> </ul> <p> </p> <p> <strong>Your day-to-day could include: </strong> </p> <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives </li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs </li> <li>Analyse performance data and recommend improvements </li> <li>Manage equipment logistics and ensure seamless setup and operation at the rig site </li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams </li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance </li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently </li> </ul> <p> </p> <p> <strong>What We re Looking For</strong> </p> <ul> <li>Graduated with bachelor s degree in engineering (all fields) within the last 24 months </li> <li>No more than 1 year of experience </li> <li>English language fluent proficiency (written and spoken) </li> <li>Strong communication and interpersonal skills </li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions </li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore) </li> </ul> <p> </p> <p> <strong>What to Expect</strong> </p> <p>This role is physically and mentally demanding. You ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you re up for the challenge, the rewards are big. </p> <p>You ll join one of our specialized product lines, such as: </p> <ul> <li>Completions </li> <li>Drilling Services </li> <li>Wireline Services </li> <li>Artificial Lift </li> <li>Well Services </li> <li>Managed Pressure Drilling and many more </li> </ul> <p> </p> <p><br></p> <p> </p></div></section>

<p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p><strong>Job Summary:</strong> Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong> <u>Job Summary:</u> </strong> </p> <p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p> <p> <strong> <u>Roles &amp; Responsibilities:</u> </strong> </p> <p> <strong>General duties:</strong> </p> <ul> <li>Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping.</li> <li>Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</li> </ul> <p> <strong>Lifting Operations:</strong> </p> <ul> <li>Hook on loads for the crane and forklift operators and act as a banksman when required. </li> <li>Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. </li> <li>Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</li> </ul> <p> <strong>Rig Move:</strong> </p> <ul> <li>Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</li> </ul> <p> <strong>Drilling / Work-over Operations:</strong> </p> <ul> <li>Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc.</li> <li>Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required.</li> <li>Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</li> </ul> <p> <strong>Materials &amp; Equipment:</strong> </p> <ul> <li>Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed.</li> <li>Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</li> </ul> <p> <strong>Housekeeping:</strong> </p> <ul> <li>Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs.</li> <li>Ensure that housekeeping standards in all areas are in accordance with Company requirements.</li> <li>Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects.</li> <li>Prepare surfaces for painting and apply paint as directed. </li> <li>Secure the current work area or operation before evacuating during emergency situations or drill.</li> </ul> <p> <strong> <u>Job Requirements:</u> </strong> </p> <p> <strong>Education &amp; Experience:</strong> </p> <ul> <li>High School or Technical Degree</li> <li>Preferably 1 year of working experience preferably in similar Oil and Gas industries.</li> <li>Minimum age 20 years up to 27 years old.</li> </ul> <p> <strong>Skills/Competencies Required:</strong> </p> <ul> <li>Elementary level of English language.</li> <li>Basic Mathematical skills adding, subtracting, dividing, multiplying .</li> <li>Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</li> </ul> <p> <strong>Physical Requirements:</strong> </p> <ul> <li>Frequent climbing (stairs, ladders).</li> <li>Frequent lifting, pulling &amp; pushing as per Company procedure.</li> <li>Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold.</li> <li>Ability to work in day/night shifts.</li> </ul> <p> <strong>Certifications:</strong> </p> <ul> <li>As per ADES Training Matrix.</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong> <u>Job Summary:</u> </strong> </p> <p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p> <p> <strong> <u>Roles &amp; Responsibilities:</u> </strong> </p> <p> <strong>General duties:</strong> </p> <ul> <li>Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping.</li> <li>Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</li> </ul> <p> <strong>Lifting Operations:</strong> </p> <ul> <li>Hook on loads for the crane and forklift operators and act as a banksman when required. </li> <li>Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. </li> <li>Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</li> </ul> <p> <strong>Rig Move:</strong> </p> <ul> <li>Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</li> </ul> <p> <strong>Drilling / Work-over Operations:</strong> </p> <ul> <li>Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc.</li> <li>Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required.</li> <li>Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</li> </ul> <p> <strong>Materials &amp; Equipment:</strong> </p> <ul> <li>Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed.</li> <li>Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</li> </ul> <p> <strong>Housekeeping:</strong> </p> <ul> <li>Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs.</li> <li>Ensure that housekeeping standards in all areas are in accordance with Company requirements.</li> <li>Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects.</li> <li>Prepare surfaces for painting and apply paint as directed. </li> <li>Secure the current work area or operation before evacuating during emergency situations or drill.</li> </ul> <p> <strong> <u>Job Requirements:</u> </strong> </p> <p> <strong>Education &amp; Experience:</strong> </p> <ul> <li>High School or Technical Degree</li> <li>Preferably 1 year of working experience preferably in similar Oil and Gas industries.</li> <li>Minimum age 20 years up to 27 years old.</li> </ul> <p> <strong>Skills/Competencies Required:</strong> </p> <ul> <li>Elementary level of English language.</li> <li>Basic Mathematical skills adding, subtracting, dividing, multiplying .</li> <li>Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</li> </ul> <p> <strong>Physical Requirements:</strong> </p> <ul> <li>Frequent climbing (stairs, ladders).</li> <li>Frequent lifting, pulling &amp; pushing as per Company procedure.</li> <li>Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold.</li> <li>Ability to work in day/night shifts.</li> </ul> <p> <strong>Certifications:</strong> </p> <ul> <li>As per ADES Training Matrix.</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Perform maintenance and repair of major assemblies and subassemblies of the T700/701C/D, T55-714 and auxiliary power units.</b></p> <ul> <li><p>Inspect engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks.</p></li> <li><p>Perform blade blending and blade replacement in cold section of powerplants.</p></li> <li><p>Replace or repair worn or damaged components, such as generators, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves.</p></li> <li><p>Ability to Perform hot section inspections and determine replacement of hot section components (GG rotors, stators, fuel injectors, igniters, power turbine.)</p></li> <li><p>Disassemble and inspect parts for wear, cracks, security, or other defects.</p></li> <li><p>Perform engine removal, replacement, reinstallation, and quick-change assembly (QCA) maintenance tasks.</p></li> </ul> <p><b>Knowledge &amp; Skills</b></p> <ul> <li><p>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p></li> <li><p>Thorough knowledge of aircraft electrical and avionics component and system troubleshooting, repair procedures and replacement of parts.</p></li> <li><p>Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.</p></li> <li><p>Working knowledge of technical publications and Logistics Information Systems.</p></li> <li><p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p></li> <li><p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p></li> <li><p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p></li> </ul> <p><b>Physical Requirements/Working Environment</b></p> <ul> <li><p>May work in aircraft maintenance hangar or outside.</p></li> <li><p>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></li> <li><p>May be exposed to extreme noise from turbine and jet engine aircraft.</p></li> <li><p>May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</p></li> <li><p>Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.</p></li> <li><p>Must be able to climb stairs, ramps, ladders, and work stands.</p></li> <li><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p></li> <li><p>May be required to lift up to 50 pounds.</p></li> <li><p>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</p></li> <li><p>Must be able to see imperfections, micrometer readings and other small scales.</p></li> <li><p>Must be able to communicate by voice and detect sound by ear.</p></li> <li><p>Must be able to distinguish color and judge three-dimensional depth.</p></li> <li><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc.</p></li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>The Aircraft Mechanic II -</b> <b>Powerplant/Engine Back Shop Mechanic (T700/701C/D, T55-714)</b> <b>with experience in all three MDS UH60, CH47 &amp; AH64</b> performs and inspects aviation unit (<b>AVUM</b>), intermediate (<b>AVIM</b>) and <b>depot maintenance</b> on assigned aircraft systems.</p> <p><b>Minimum Requirements</b></p> <ul> <li>High School Graduate or equivalent is required. </li> <li>Five (5) years of recent applicable aircraft maintenance experience is required.</li> <li><b>With A&amp;P</b> Two (2) years aviation maintenance experience, and Two (2) years' experience on MDS <b>UH60, CH47, &amp; AH64</b>is required.</li> <li><b>Without A&amp;P,</b> must have Three (3) years aviation maintenance experience, Three (3) years rotary wing aircraft experience and Two (2) years on the assigned Mission Design Series UH-60, AH-64, CH-47 (MDS) to qualify.</li> <li>All experience must be within the Five (5) most recent years.</li> <li>Must be in possession of a <b>Valid U.S. Passport</b> for travel internationally. Passport must contain a minimum of 6 Blank pages and 2 years remaining before expiration date.</li> <li>Ability to obtain/maintain a US Government Security Clearance (NAC-I T1) Public Trust. <b>US Citizenship is Required</b> to obtain a Security Clearance, and for facility access to this site.</li> <li>Able to clear CENTCOM MOD Physicals requirement for deployment. (Attend CRC).</li> <li>Must be able to obtain Kuwait Visa.</li> </ul><p></p></section>