وظائف مهندس PLC في الكويت
٧٧ وظائف شاغرة
الكويت - محافظة العاصمة (الكويت)
<p><h4>Project</h4>
<p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead HSE Engineer to support HSE function on PMC Project with Kuwait Oil Company in Kuwait.</p>
<h4>Summary section</h4>
<p>The Lead HSE engineer will coordinate implementation of the KOC PMC Safety policies, HSE Management System and project specific HSE Management Plans as they apply to the project.<br>
He will ensure that the site complies with the relevant HSE legislation and KOC HSE requirements.<br>
He will develop and implement the project HSE MS.<br>
He will develop and maintain statistical data for the project and prepare reports as required for the KBR KOC PMC HSEQ Manager.</p>
<h4>Mandatory qualifications including required education, experience, & skills:</h4>
<ul>
<li>Bachelor degree in engineering</li>
<li>Minimum 12 years total post-graduation experience</li>
<li>Minimum 8 years oil & gas post-graduation experience</li>
<li>Minimum 5 years’ experience in a Lead HSE Engineer role</li>
<li>Practical experience of design, construction, commissioning and maintenance aspects of oil/gas installations</li>
<li>Practical experience with HSE management systems, reporting and audit procedures</li>
<li>Excellent written coordination and verbal communication skills</li>
<li>Ability to develop, update and maintain in-house procedures</li>
<li>Must be conversant with local and international safety standards and norms</li>
<li>Must possess two or more HSE certifications (certified courses) in General Industrial Safety, Construction Safety, Environmental Management, Industrial Hygiene, ISO 14001 / OHSAS 18001 Lead Auditor, NEBOSH, ICertOSH, ASSE Certificate in Global Safety Management or equivalent courses</li>
</ul>
<h4>Responsibilities:</h4>
<ul>
<li>Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment</li>
<li>Ensure the EPC contractors develop, implement and maintain a specific project Risk Management Plan</li>
<li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations</li>
<li>Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements</li>
<li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action</li>
<li>Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/additions to requirements as they come into effect</li>
<li>Review EPC contractor Safety Management System and advise of required changes</li>
<li>Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractors to foster the professional image of KBR</li>
<li>Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken</li>
</ul>
<p>Other key activities shall include but not be limited to the following:</p>
<ul>
<li>Pro-actively visit site and with the EPC contractor implement safety measures - promote/ensure safe work practices</li>
<li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings</li>
<li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained</li>
<li>Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmes</li>
<li>Maintain a HS&E audit and assessment program for the location</li>
<li>Carry out regular inspections of the work areas with the respective EPC contractor line manager and/or HSE representative and prepare reports</li>
<li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc.</li>
<li>Assist EPC contractor line management and/or construction supervisors in accident investigation process and report accordingly</li>
<li>Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives</li>
<li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors</li>
<li>Monitor the availability and use of safety apparel and equipment</li>
<li>Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training</li>
<li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls</li>
<li>Ensure all lines of communication on HSE matters remain open and effective between all parties particularly KOC, KBR, EPC contractors and their sub-contractors</li>
</ul>
<p>Decarbonization – Energy transition – Sustainability<br>
Belong. Connect. Grow. with KBR!</p></p><p></p>
الكويت
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Instrument & Control Engineer</b> in <b>Kuwait</b>. Our client is a reputed organization in the Power Generation sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Maintain and troubleshoot instrumentation systems in a large-scale power plant.<br></li><li>Calibrate field instruments and transmitters.<br></li><li>Monitor and maintain DCS and PLC control systems.<br></li><li>Diagnose instrumentation faults and ensure minimal downtime.<br></li><li>Perform preventive and corrective maintenance activities.<br></li><li>Ensure compliance with plant safety standards.<br></li><li>Coordinate with electrical and mechanical maintenance teams.<br></li><li>Prepare maintenance reports and documentation.<br></li></ul>Required Skills<br><ul><li>Power Plant Instrumentation<br></li><li>DCS Operation & Troubleshooting<br></li><li>PLC Systems<br></li><li>Instrument Calibration<br></li><li>Preventive & Breakdown Maintenance<br></li></ul>Preferred Skills<br><ul><li>Commissioning experience<br></li><li>Root Cause Analysis<br></li><li>SAP Maintenance Module<br></li></ul>Work Experience Requirements<br><p>Candidates must possess a minimum of <b>10 years</b> of experience in instrumentation within a <b>large-scale power plant</b> environment. Experience in DCS, PLC systems, calibration, and plant maintenance is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.E. Instrumentation & Control Engineering<br></li><li><b>Preferred:</b> M.E./Relevant Technical Certification<br></li><li><b>Additional Certifications:</b> Instrumentation, PLC/DCS Training (preferred)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>
الكويت
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>I&C Engineer</b> in <b>Kuwait</b>. Our client is a reputed organization in the Water Treatment / RO & Desalination sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Maintain and troubleshoot instrumentation and control systems.<br></li><li>Monitor PLC, DCS, SCADA and process control equipment.<br></li><li>Perform preventive and corrective maintenance of plant instruments.<br></li><li>Ensure smooth operation of RO and desalination plant processes.<br></li><li>Calibrate transmitters, sensors, analyzers and control valves.<br></li><li>Coordinate with maintenance and operations teams.<br></li><li>Ensure compliance with plant safety and quality standards.<br></li><li>Prepare maintenance reports and technical documentation.<br></li></ul>Required Skills<br><ul><li>Instrumentation Engineering – Installation and maintenance of field instruments.<br></li><li>PLC & DCS – Troubleshooting and programming knowledge.<br></li><li>RO & Desalination – Experience in water treatment plants.<br></li><li>Process Control – Monitoring and optimizing plant operations.<br></li><li>Electrical & Instrument Maintenance – Preventive and corrective maintenance.<br></li></ul>Preferred Skills<br><ul><li>SCADA knowledge<br></li><li>Root Cause Analysis<br></li><li>CMMS Maintenance Software<br></li></ul>Work Experience Requirements<br><p>Minimum <b>6 years</b> of experience in Instrumentation & Control Engineering with hands-on exposure to <b>RO/Desalination plants</b>. Experience in industrial process plants and maintenance environments is highly preferred.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.E. Instrumentation & Control Engineering<br></li><li><b>Preferred:</b> M.E./Relevant Certification<br></li><li><b>Additional Certifications:</b> PLC/DCS Training (Preferred)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>
جهة العمل غير مُفصح عنها
الكويت - محافظة العاصمة (الكويت)
<p>Perform maintenance and repair of CNC machines / PLC / VFD programming /repair & maintenance of Process plants /EOT Cranes / Air compressor /Utility equipment’s/Pneumatic and Hydraulic systems.
Knowledge: Ability to read and interpret Electrical/Mechanical/Hydraulic Circuits and OEM manuals.
Proficient in use of Computer /AutoCAD/ Basic electronics repair / Knowledge on Fire Fighting and HVAC systems.
</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for a Maintenance Engineer</p>
الكويت
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Lead Construction Engineer Civil /Structural - BUILDINGS<br><br><p><b>Job Title </b></p><br><br><br><p><b><i>Lead Construction Engineer – Civil Structural (Buildings experience)</i></b></p><br><br><br><p><b>Division /Project </b></p><br><br><br><p>KBR’s Sustainable Technology Solutions (STS) group is looking for a <b>Lead Construction Engineer – Civil Structural</b> assigned to one of the <i>Buildings Construction Projects</i> within the PMC contract for the supply of Programme Management services with Kuwait Oil Company.</p><br><br><br><p><b>Primary Objectives</b></p><br><br><br><p>Development and Management of construction and completions capability across PMC projects ensuring that design integrity is not compromised while managing the department in the execution of the process.</p><br><br><br><p><b>Responsibilities</b></p><br><br><ul><li>Promote and drive the involvement of Construction in areas of technical design, schedule, preliminary execution planning, and cost estimating.</li><li>Develop and maintain a familiarity and appreciation of capability and ongoing workload of Construction’s support providers / contractors. </li><li>Develop and maintain functional responsibility for all construction and completions personnel</li><li>Overall supervision of construction engineers.</li><li>Technical competence of construction personnel.</li><li>Forecast requirement for construction engineering resources and allocating those resources.</li><li>Prepare man hour estimates to perform project tasks.</li><li>Promote cost reduction and productivity enhancing initiatives.</li><li>Technical supervision of project designated construction engineers in the execution of their duties.</li><li>Prepare weekly progress and expenditure reports on a project specific basis.</li></ul><ul><li>Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system.</li><li>Safety – Responsible for personal safety safe working practices. Understand and follow OH&S procedures.</li></ul><br><p><b>Qualifications including Required Education, Experience, & Skills</b></p><br><br><ul><li>Bachelor Degree in Engineering</li><li>Minimum 12 years total post-graduation experience</li><li>Minimum 8 years post-graduation experience in civil structural; construction of <b>buildings</b></li><li>Must Have min 5 years’ experience in a Lead/Senior Construction role</li></ul><br><b>Essential skills/experience</b><ul><li>Analysis and problems solving</li><li>Creativity/innovation</li><li>Communications, written and oral.</li><li>Formal presentation skills</li><li>Ability to influence and persuade.</li></ul><br><p><b>Decarbonization – Energy Transition – Sustainability </b></p><br><br><p><b>Belong. Connect. Grow. with KBR</b></p><br><br><br><br><br> </div>
الكويت - محافظة العاصمة (الكويت)
<p><h4>Division / Project</h4>
<p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead Construction Engineer – Civil Structural assigned to one of the buildings construction projects within the PMC contract for the supply of programme management services with Kuwait Oil Company.</p>
<h4>Primary objectives</h4>
<p>Development and management of construction and completions capability across PMC projects ensuring that design integrity is not compromised while managing the department in the execution of the process.</p>
<h4>Responsibilities</h4>
<ul>
<li>Promote and drive the involvement of construction in areas of technical design, schedule, preliminary execution planning, and cost estimating.</li>
<li>Develop and maintain a familiarity and appreciation of capability and ongoing workload of construction’s support providers / contractors.</li>
<li>Develop and maintain functional responsibility for all construction and completions personnel.</li>
<li>Overall supervision of construction engineers.</li>
<li>Technical competence of construction personnel.</li>
<li>Forecast requirement for construction engineering resources and allocating those resources.</li>
<li>Prepare man hour estimates to perform project tasks.</li>
<li>Promote cost reduction and productivity enhancing initiatives.</li>
<li>Technical supervision of project designated construction engineers in the execution of their duties.</li>
<li>Prepare weekly progress and expenditure reports on a project specific basis.</li>
<li>Quality assurance – responsible for working within the provisions and guidelines of the quality assurance system.</li>
<li>Safety – responsible for personal safety and safe working practices. Understand and follow OH&S procedures.</li>
</ul>
<h4>Qualifications including required education, experience, & skills</h4>
<ul>
<li>Bachelor degree in engineering</li>
<li>Minimum 12 years total post-graduation experience</li>
<li>Minimum 8 years post-graduation experience in civil structural; construction of buildings</li>
<li>Must have minimum 5 years’ experience in a lead/senior construction role</li>
</ul>
<h4>Essential skills / experience</h4>
<ul>
<li>Analysis and problem solving</li>
<li>Creativity / innovation</li>
<li>Communications, written and oral</li>
<li>Formal presentation skills</li>
<li>Ability to influence and persuade</li>
<li>Decarbonization – energy transition – sustainability</li>
</ul>
<p><strong>Belong. Connect. Grow. with KBR</strong></p></p><p></p>
الكويت
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Lead HSE Engineer<br><br><br><p><b>Job Title </b></p><br><br><br><p>Lead HSE Engineer</p><br><br><br><p><b>Project</b></p><br><br><br><p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead HSE Engineer to support HSE function on PMC Project with Kuwait Oil Company in Kuwait.</p><br><br><br><p><b>Summary Section </b> </p><br><br><br><p>The <b>Lead HSE engineer</b> will coordinate implementation of the KOC PMC Safety policies, HSE Management System and Project specific HSE Management Plans as they apply to the project.</p><br><br><p>He will ensure that the site complies with the relevant HSE Legislation and KOC HSE requirements.</p><br><br><p>He will develop and implement the project HSE MS.</p><br><br><p>He will develop and maintain Statistical data for the Project and prepare reports as required for the KBR KOC PMC HSEQ Manager.</p><br><br><br><p><b>Mandatory</b> <b>Qualifications including Required Education, Experience, & Skills:</b></p><br><br><ul><li><b><i>Bachelor Degree in Engineering</i></b></li><li><b><i>Minimum 12 years total post-graduation experience.</i></b></li><li><b><i>Minimum 8 years Oil & Gas post-graduation experience</i></b></li><li><b><i>Minimum 5 years’ experience in a Lead HSE Engineer role.</i></b></li><li><b><i>Practical experience of design, construction, commissioning and maintenance aspects of oil/gas installations.</i></b></li><li><b><i>Practical experience with HSE management systems, reporting and audit procedures. Excellent written coordination and verbal communication skills. Ability to develop, update and maintain in-house procedures. Must be conversant with local and international saftey standards and norms.</i></b></li><li><b><i>Must possess two or more HSE certifications (certified courses) in General Industrial Safety, Construction Safety, Environmental Management, industrial Hygiene, ISO 14001 / OHSAS 18001 Lead Auditor, NEBOSH, ICertOSH, ASSE Certificate in Global Safety Management or equivalent courses.</i></b></li></ul><br><p><b>Responsibilities: </b></p><br><br><p>- Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment.</p><br><br><p>- Ensure the EPC contractors develop implement and maintain a specific project Risk Management Plan</p><br><br><p>- Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations.</p><br><br><p>- Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements.</p><br><br><p>- Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action.</p><br><br><p>- Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/ additions to requirements as they come into effect.</p><br><br><p>- Review EPC contractor Safety Management System and advise of required changes.</p><br><br><p>- Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractors to foster the professional image of KBR.</p><br><br><p>- Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken</p><br><br><p>Other key activities shall include but not be limited to the following:</p><br><br><ul><li>Pro-actively visit site and with the EPC contractor implement safety measures-promote/ensure safe work practices</li><li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings</li><li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained.</li><li>Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmes.</li><li>Maintain a HS&E audit and assessment program for the location.</li><li>Carry out regular inspections of the work areas with the respective EPC contractor line manager and or HSE representative and prepare reports.</li><li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc.</li><li>Assist EPC contractor line management and or construction supervisors in accident investigation process and report accordingly.</li><li>Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives.</li><li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors</li><li>Monitor the availability and use of safety apparel and equipment.</li><li>Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training,</li><li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls</li><li>Ensure all lines of communication on HSE-matters remain open and effective between all parties particularly KOC,KBR, EPC contractors and their sub-contractors.</li></ul><br><br><p><b>Decarbonization – Energy Transition – Sustainability </b></p><br><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br><br> </div>
Surbana Jurong
الكويت
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>About Surbana Jurong</b></p><br><p>Surbana Jurong Group (SJ) is a leading global urban, infrastructure, and engineering consulting firm headquartered in Singapore. Driven by a vision to build cities and shape lives, SJ delivers sustainable, innovative, and integrated solutions across the built environment. With a strong presence across Asia, the Middle East, and Africa, SJ provides multidisciplinary expertise in transport, ports, marine, water, energy, buildings, and large-scale infrastructure projects.</p><br><p>SJ partners with governments, multilateral development agencies, and private sector clients to plan, design, supervise, and manage complex infrastructure projects throughout their lifecycle. By combining global expertise with local knowledge, SJ delivers practical, high-impact solutions that enhance connectivity, strengthen communities, and support long-term sustainable development.</p><br><p><b>The role</b></p><br><p>We are seeking an experienced <b>Senior Instrument & Control Engineer </b>to support the delivery of major utility, industrial, and infrastructure projects. The successful candidate will provide technical oversight of instrumentation, automation, control, and SCADA systems throughout construction, testing, commissioning, and handover phases, ensuring reliable system integration and operational performance.</p><br><ul><li>Provide technical supervision of instrumentation, automation, control, telemetry, and SCADA system installation activities across complex infrastructure projects.</li><li>Review engineering documentation, instrumentation layouts, control philosophies, P&IDs, loop diagrams, technical submittals, and construction methodologies.</li><li>Monitor installation, testing, commissioning, and system performance verification activities to ensure compliance with project requirements and industry standards.</li><li>Support factory and site acceptance testing, loop checking, system integration, and operational readiness assessments.</li><li>Oversee quality assurance and quality control processes for instrumentation, control, and automation systems.</li><li>Coordinate closely with multidisciplinary engineering teams to support seamless integration of electrical, mechanical, process, and control systems.</li><li>Maintain commissioning records, technical documentation, defect tracking registers, and project reporting requirements.</li><li>Review as-built documentation, operation and maintenance manuals, and handover deliverables.</li><li>Provide technical support for troubleshooting, system optimization, risk mitigation, and continuous improvement initiatives.</li></ul><p>With a track record of achievement in a related role, you will have gained your experience in a consultancy environment and have a passion for building trusted relationships to drive positive change and win new work.</p><br><p>Suitable applicants will have/be:</p><br><ul><li>Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Automation Engineering, or a related discipline.</li><li>Minimum 15 years’ experience in instrumentation, control, automation, or SCADA engineering on major utility, industrial, water, or infrastructure projects.</li><li>Strong knowledge of PLC, SCADA, telemetry, field instrumentation, control systems, communication networks, and integrated plant automation.</li><li>Demonstrated experience in testing, commissioning, loop checking, system integration, and performance verification of complex control systems.</li><li>Proven ability to review engineering documentation, control philosophies, instrumentation drawings, technical submissions, and contractor deliverables.</li><li>Experience coordinating multidisciplinary interfaces during construction, commissioning, and operational handover phases.</li><li>Excellent communication, stakeholder engagement, and technical reporting skills with strong English language proficiency.</li></ul><p>Surbana Jurong Group is an equal opportunity employer. We believe that diversity, equity, and inclusion strengthen our people, enrich our perspectives, and enable us to deliver better outcomes for our clients, partners, and the communities we serve.</p><br><p><b>How to apply </b></p><br><p>All applications must be submitted online and for a confidential discussion regarding this opportunity, please contact<b> Taimoor Tariq - </b><b>Taimoor.tariq@sjgroup.com</b></p><br><p>For further information about Surbana Jurong Group, please visit our website at www.surbanajurong.com.</p><br><p>To explore career opportunities and learn more about working with SJ Group, please visit our Careers page at SJ Careers.</p><br><p>All recruitment activities are managed by the Recruitment & Talent team. At this stage, this position does not require agency support. Kindly do not forward resumes directly to SJ Group employees.</p><br><p>At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!</p><br> </div>
الكويت
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Project Engineer I - Buildings Projects<br><br><br><br><br><p><b>Job Title </b></p><br><br><br><p><b><i>Project Engineer I- Buildings Projects</i></b></p><br><br><br><p><b>Division /Project </b></p><br><br><br><p>KBR's Sustainable Technology Solutions (STS) group is seeking a <b>Project Engineer I – Building & Office Tower Projects</b> to support the planning, design, procurement, construction, and commissioning of office towers, administration buildings, control centers, and associated facility infrastructure under PMC contracts.</p><br><br><br><p><b>Primary Objectives</b></p><br><br><ul><li>Management of support services for supervising and directing engineering, procurement and management of construction contractors appointed by the Client.</li><li>Ensure the successful delivery of projects through all phases, including concept design, FEED, detailed engineering, tendering, construction, commissioning, and handover.</li><li>Act as primary technical coordination interface with client to ensure that the client’s expectations are satisfied.</li></ul><ul><li>Ensure the project conforms to the client’s approved Basis of Design and local authority requirements, building regulations, sustainability objectives, and applicable international codes and standards.</li></ul><ul><li>Coordinate architectural, structural, MEP, fire protection, security, ICT, vertical transportation, and interior fit-out disciplines to achieve an integrated design solution</li></ul><br><p><b>Responsibilities</b></p><br><br><ul><li>Support project mobilization, setup, takeover, and handover activities</li><li>Set-up, take over / hand over of projects</li><li>Establish clear objectives and deliverables for design consultants and engineering teams</li><li>Management of PMC’s engineering teams during FEED, Prepare and review scopes of work, technical specifications, employer requirements, and tender documentation</li><li>Compilation of the of scope of work documents, technical part of Invitation to Bid documents and the documentation of Project Milestone Reviews</li><li>Coordination of reviews and comments on engineering and other technical deliverables of 3rd party companies like P&IDs, line lists, equipment datasheets, instrumentation index, cable routing, etc. within the agreed review time.</li><li>Ensures compliance with all applicable project standards and specifications</li><li>Ensures proper compilation and updating of as-built documents, redlines, MTOs, loop folders and commissioning binders and handover documentation.</li><li>Ensures the delivery of the as built (End of Job) documentation to the client in time and good quality</li><li>Contribution to the development of overall project schedule.</li><li>Ensures work progress as per approved schedule in close cooperation with Project Controls Team</li><li>Set up and regularly maintaining a project dashboard in close cooperation with Project Controls Team</li><li>Monitors with support of the Project Controls Team cost aspects of the project within direct control to forecast final costs, trends and takes action to avoid cost overruns.</li><li>Evaluation of Earned Value / value of work for project completion with support of the Project Controls Team</li><li>Builds and maintains a healthy relationship with clients and acts as project focal point for the client</li><li>Proactively resolves scope and schedule issues with the 3rd party contractor as they arise.</li><li>Knows the contract between the FEED- or EPC-Contractor and between the Client and 3rd party contracts.</li><li>Knowing the PMC Contract between KBR and the Client</li><li>Ensures Change Order recording and participation from project team in technical parts of change order assessment</li><li>Regularly provides input to project reports to internal Project Management and the Clients</li><li>Assessment and feedback of third-party contractor’s project reports</li><li>Defines and communicates team’s priorities such as achievement of milestones and other key project objectives.</li><li>Listens to the team, discusses the issues, resolves problems and directs activities to remove roadblocks and achieve objectives.</li><li>Effective communication with the design and engineering teams (inside PMC and third parties) and other project stakeholders like operations, maintenance etc.</li><li>Regularly chairs and records project team meetings within the PMC organisation and with the client and with the 3rd party contractors or consultants.</li><li>Responsibility for preparation and status tracking of all projects related correspondence and transmittals / project documents.</li><li>Perform together with relevant discipline engineers technical bid evaluations (TBE) and award recommendations</li><li>Participates or delegates participation of discipline engineers in Factory and Site Acceptance Tests</li></ul><br><p><b>Qualifications including Required Education, Experience, & Skills</b></p><br><br><ul><li><span>B. Sc. Eng from an accredited college or university.</span></li></ul><br><ul><li><span>Minimum 15 years post-graduation total experience</span></li></ul><br><ul><li><span>10 years minimum experience post qualification in infrastructure, buildings projects</span></li></ul><br><ul><li><span>5 years of minimum experience in a Senior Project Engineer/Project Manager role</span></li></ul><br><ul><li><span>Must have demonstrated ability of effective functioning in a multi-cultural environment, preferably in the Middle East.</span></li></ul><br><b>Essential skills/experience</b><ul><li>Project planning and execution.</li><li>Multidisciplinary design coordination.</li><li>Commercial and contract awareness.</li><li>Construction and commissioning management.</li><li>Stakeholder engagement and client management.</li><li>Problem-solving and decision-making.</li><li>Strong written and verbal communication skills.</li><li>Presentation and reporting skills.</li><li>Leadership and team coordination.</li><li>Risk management and change control.</li><li>Proficiency with project management and BIM platforms.</li><li>Analysis and problems solving</li><li>Creativity/innovation</li><li>Communications, written and oral.</li><li>Ability to influence and persuade.</li></ul><br><p><b>Decarbonization – Energy Transition – Sustainability </b></p><br><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>
الكويت
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><span><strong>About us</strong> </span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions. </span></p><br><p><span><strong>Primary Objective</strong></span></p><br><p><span>Ensure instrumentation design integrity while leading the instrumentation engineering group on specific projects.</span></p><br><p><span><strong>What You Will Do</strong></span></p><br><ul><li><span>Ensure work is carried out competently and effectively, within time and budget constraints, and that project objectives are met </span></li><li><span>Provide overall supervision of instrumentation engineers, designers, and technical personnel during project execution </span></li><li><span>Ensure the integrity of the work scope and that all work is carried out in accordance with applicable codes and standards </span></li><li><span>Manage project discipline resource requirements</span></li><li><span>Prepare instrumentation cost, schedule, and resource estimates for assigned projects</span></li></ul> <p><span><strong>What You Will Bring</strong></span></p><br><ul><li><span>Excellent 2D computer design skills using AutoCAD and/or MicroStation </span></li><li><span>Ability to interpret technical drawings </span></li><li><span>Ability to produce accurate design drawings based on project information </span></li><li><span>Ability to interact effectively with others and communicate clearly, both verbally and in writing</span></li><li><span>Ability to perform instrument hook-ups is preferable</span></li><li><span>Knowledge of instrumentation installation requirements in hazardous areas </span></li><li><span>Experience with 3D modelling systems such as PDS, PDMS, or AutoPlant </span></li><li><span>Experience with advanced engineering design and data systems such as SmartPlant Instrumentation </span></li><li><span>Exposure to site surveys, construction or commissioning support, and site acceptance and loop testing on oil & gas facilities </span></li><li><span>Experience working in a PMC (Project Management Consultancy) environment</span></li><li><span>Demonstrated experience working in the Middle East project environment</span></li></ul><p><span><strong>Qualifications / Experience</strong></span></p><br><ul><li><span>Full-time Bachelor’s Degree in Instrumentation/Instrumentation & Control Engineering from an accredited university </span></li><li><span>Minimum 15 years of total experience post graduate studies</span></li><li><span>Minimum 10 years of experience in the oil & gas, refinery, or petrochemical industry</span></li><li><span>Minimum 5 years of experience as a Lead Design Engineer or equivalent</span></li><li><span>Previous experience working with a contractor or in a comparable delivery model</span></li></ul><p><span><strong>Why This Role Matters</strong></span></p><br><ul><li><span>You will play a key role in delivering safe, sustainable projects by leading a high-performing team and ensuring engineering excellence across all phases of the project. Your regional experience and PMC background will be critical in navigating project complexity and delivering value to our clients.</span></li></ul><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>
جهة العمل غير مُفصح عنها
الكويت - United Arab Emirates (UAE)
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>The Quantity Surveyor shall monitor the BOQ's, estimates, schedule of rates and material take-offs as presented by the PC Contractor. These shall be verified by site measuremenunt of materials
and manhours expended on the varying workpacks across all disciplines. He shall support the Contract Engineer in the compilation of cost reports and forecasts to completion as required.
Measurement and evaluation of final accounts including claims, extra items, deviations, variations and amendments to contracts, Candidate shall be degree qualified and MCIRS affiliated. Will perform liaison duties between Client and Contractor . </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience</p><p>Immediately available candidates within Kuwait preferred</p><p></p></section>
الكويت - محافظة العاصمة (الكويت)
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>The Production Optimization Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Optimization Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>
الكويت
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>The Well Engineer is responsible for ensuring well engineering and operations support for one or more rigs or well sites. They are tasked with developing and delivering optimized technical well designs for areas of responsibility, including preparation of Well Proposals, Basis of Designs, Well Programs(i.e., Drilling, Completion, Workover), project budgets, and End of Well Reports. They perform Assistant Well Site Leader duties according to the Well Engineer Training Program development requirements. They also provide risk management project support and apply lessons learned to improve the well program and provide real-time support to the project operations as required. The position is expected to identify opportunities for continuous improvement of service delivery, well program, well operations, and formally communicate findings. </p><ul><li>Provide technical and operational support throughout the project execution process.</li><li>Prepare well schedule, budget estimates, and project well control briefing.</li><li>Support multiple PL operations in a collaborative optimized program design.</li><li>Assist in incident response, recovery, and incident investigation.<br></li><li>Understand, communicate, and implement new technologies for the project.</li><li>Analyze job execution versus design and formally capture design improvements and optimization opportunities.</li><li>Participate in selection and evaluation of service companies, suppliers, and equipment.</li><li>Ensure proper communication with relevant parties (i.e., Customer, PLs, third-parties, etc.)</li><li>Participate in HARCs and other risk assessment methodology.</li><li>Forecast and plan medium- and long-term needs to meet program requirements</li><li>Anticipate operational changes and needs and revise the plan accordingly.</li><li>Manage and monitor daily operational progress (i.e., scope, time, cost and quality) versus plan and provide recommendations for improvements utilizing new technology options where appropriate.</li><li>Evaluate results versus objectives, focusing on service companies and key contractors performance.</li><li>Perform engineering studies to solve recurring well problems and initiate engineering corrective actions for continuous improvement.</li><li>Attend critical operations at the wellsite as necessary.</li></ul><p>10+</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>
الكويت
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><span><strong>About us</strong> </span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions. </span></p><br><p><span><strong>Primary Objective</strong></span></p><br><ul><li><p><span>Ensure process design integrity while leading the process engineering group on specific projects.</span></p><br></li><li><p><span>Responsible for the progress and quality of assigned tasks within the process area, including the supervision of engineers and design teams.</span></p><br></li><li><p><span>To ensure all work carried out conforms with agreed codes and practices, meets all requirements of the contracts specification and ensure all work is carried out within agreed schedules, budgets and procedures.</span></p><br></li></ul><p><span><strong>What You Will Do</strong></span></p><br><ul><li><p><span>Ensure work is carried out competently and effectively, within time and budget constraints, and that project objectives are met.</span></p><br></li><li><p><span>Provide overall supervision of prcoess engineers, designers, and technical personnel during project execution.</span></p><br></li><li><p><span>Ensure the integrity of the work scope and that all work is carried out in accordance with applicable codes and standards.</span></p><br></li><li><p><span>Manage project discipline resource requirements.</span></p><br></li><li><p><span>Design Estimates and production and checking of design documents and drawings.</span></p><br></li><li><p><span>Prepare process discipline cost, schedule, and resource estimates for assigned projects.</span></p><br></li><li><p><span>Management, technical execution and completion of engineering assigned tasks.</span></p><br></li><li><p><span>Assisting the project engineers in the co-ordination and preparation of input into the contract documents for the discipline area, including design criteria, scope of work, procedures and design approach.</span></p><br></li></ul> <p><span><strong>What You Will Bring</strong></span></p><br><ul><li><p><span>Production and approval of PFDs, EFDs, MSDs, Cause and Effect Diagrams, Data Sheets, calculations and system modelling and simulation.</span></p><br></li><li><p><span>Working to and using the company management systems.</span></p><br></li><li><p><span>Ensuring compliance to company, client, local and international standards as given in the project PEP etc.</span></p><br></li><li><p><span>Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the BU, etc.</span></p><br></li><li><p><span>Safety – Responsible for personal safety safe working practices for the BU, etc. Understand and follow OH&S procedures.</span></p><br></li><li><p><span>Experience working in a PMC (Project Management Consultancy) environment.</span></p><br></li><li><p><span>Demonstrated experience working in the Middle East project environment.</span></p><br></li></ul><p><span><strong>Qualifications / Experience</strong></span></p><br><ul><li><p><span>Full-time Bachelor’s Degree in Chemical Engineering from an accredited university </span></p><br></li><li><p><span>Minimum 15 years of total experience post graduate studies</span></p><br></li><li><p><span>Minimum 10 years of experience in the oil & gas, refinery, or petrochemical industry</span></p><br></li><li><p><span>Minimum 5 years of experience as a Lead Design Engineer or equivalent</span></p><br></li><li><p><span>Previous experience working with a contractor or in a comparable delivery model</span></p><br></li></ul><p><span><strong>Why This Role Matters</strong></span></p><br><ul><li><p><span><span>You will play a key role in delivering safe, sustainable projects by leading a high-performing team and ensuring engineering excellence across all phases of the project. </span></span></p><br></li><li><p><span><span>Your regional experience and PMC background will be critical in navigating project complexity and delivering value to our clients.</span></span></p><br></li></ul><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>
الكويت - الأحمدي
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>The Production Stimulation Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Stimulation Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations. Offers technical guidance to engineers or technicians assigned to work on a common project. Mentors junior stimulation engineers within Well Services and DCS. Organizes client seminars, understands and catalogues client needs and implements solutions. Is regarded as a stimulation expert within the oilfield community and represents Schlumberger in various and multiple industry forum. Periodic publications in these forums are expected. May participate in recruiting.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>15+</p><p></p></section>
الكويت - الأحمدي
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>The Well Engineer is responsible for ensuring well engineering and operations support for one or more rigs or well sites. They are tasked with developing and delivering optimized technical well designs for areas of responsibility, including preparation of Well Proposals, Basis of Designs, Well Programs(i.e., Drilling, Completion, Workover), project budgets, and End of Well Reports. They perform Assistant Well Site Leader duties according to the Well Engineer Training Program development requirements. They also provide risk management project support and apply lessons learned to improve the well program and provide real-time support to the project operations as required. The position is expected to identify opportunities for continuous improvement of service delivery, well program, well operations, and formally communicate findings. Provide technical and operational support throughout the project execution process. Prepare well schedule, budget estimates, and project well control briefing. Support multiple PL operations in a collaborative optimized program design. Assist in incident response, recovery, and incident investigation. Understand, communicate, and implement new technologies for the project. Analyze job execution versus design and formally capture design improvements and optimization opportunities. Participate in selection and evaluation of service companies, suppliers, and equipment. Ensure proper communication with relevant parties (i.e., Customer, PLs, third-parties, etc.) Participate in HARCs and other risk assessment methodology. Forecast and plan medium- and long-term needs to meet program requirements Anticipate operational changes and needs and revise the plan accordingly. Manage and monitor daily operational progress (i.e., scope, time, cost and quality) versus plan and provide recommendations for improvements utilizing new technology options where appropriate. Evaluate results versus objectives, focusing on service companies and key contractors performance. Perform engineering studies to solve recurring well problems and initiate engineering corrective actions for continuous improvement. Attend critical operations at the wellsite as necessary.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>
الكويت - الأحمدي
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>The SIS Well Placement Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The SIS Well Placement Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>
الكويت - محافظة العاصمة (الكويت)
<p><h4>Division / Project</h4>
<p>KBR’s Sustainable Technology Solutions (STS) group is looking for an HSE Engineer for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p>
<p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p>
<h4>Primary Objectives</h4>
<ul>
<li>Coordinate implementation of the KOC PMC safety policies, HSE management system, and project-specific HSE management plans as they apply to the project.</li>
<li>Ensure that the site complies with the relevant HSE legislation and KOC HSE requirements.</li>
<li>Develop and implement the project HSE management system.</li>
<li>Develop and maintain statistical data for the project.</li>
<li>Prepare reports as required for the HSEQ manager.</li>
</ul>
<h4>Responsibilities</h4>
<ul>
<li>Monitor the EPC contractor HSE management system and provide advice and assistance to EPC HSE managers to ensure consistent compliance and reduce risk to project employees and the environment.</li>
<li>Ensure the EPC contractors develop, implement, and maintain a specific project risk management plan.</li>
<li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented timely in accordance with KOC expectations.</li>
<li>Provide advice and guidance to the EPC contractor management team on HSE issues through interpretation of KOC policies and statutory requirements.</li>
<li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety and training programs to provide a basis for further health and safety activities and highlight trends for future action.</li>
<li>Monitor compliance with all Kuwait legislative requirements including dissemination of information to PMC and EPC managers and employees regarding amendments or additions to requirements as they come into effect.</li>
<li>Review EPC contractor safety management system and advise on required changes.</li>
<li>Develop and maintain professional relationships with KOC, regulatory bodies, and EPC contractors to foster the professional image of KBR.</li>
<li>Visit the project site regularly to ensure interest and awareness of HSE is maintained; conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken.</li>
<li>Proactively visit site and, with the EPC contractor, implement safety measures to promote and ensure safe work practices.</li>
<li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow-up on findings.</li>
<li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing work to maintain a safe working environment.</li>
<li>Assist EPC subcontractor safety advisors and site management in the development and revision of specific site safety programmes.</li>
<li>Maintain an HS&E audit and assessment program for the location.</li>
<li>Carry out regular inspections of work areas with the respective EPC contractor line manager and HSE representative and prepare reports.</li>
<li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters, etc.</li>
<li>Assist EPC contractor line management and construction supervisors in accident investigation processes and report accordingly.</li>
<li>Develop and implement safety initiatives to continually improve, achieve, and maintain stated safety performance and objectives.</li>
<li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors.</li>
<li>Monitor the availability and use of safety apparel and equipment.</li>
<li>Provide advice to EPC subcontractor supervision on the development of project-specific procedures and Job Safety Analysis (JSA) training.</li>
<li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls.</li>
<li>Ensure all lines of communication on HSE matters remain open and effective between all parties, particularly KOC, KBR, EPC contractors, and their subcontractors.</li>
</ul>
<h4>Qualifications including Required Education, Experience, & Skills</h4>
<ul>
<li>Bachelor’s degree in engineering.</li>
<li>Minimum 8 years total post-graduation experience.</li>
<li>Minimum 5 years oil and gas post-graduation experience.</li>
<li>Minimum 5 years’ experience in an HSE engineer role.</li>
<li>Practical experience with HSE management systems, reporting, and audit procedures.</li>
<li>Ability to develop, update, and maintain in-house procedures.</li>
<li>Must be conversant with local and international safety standards and norms.</li>
<li>Practical experience of design, construction, commissioning, and maintenance aspects of oil and gas installations.</li>
<li>Decarbonization, energy transition, and sustainability knowledge.</li>
</ul>
<p><strong>Belong. Connect. Grow.</strong></p></p><p></p>
جهة العمل غير مُفصح عنها
الكويت - محافظة العاصمة (الكويت)
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>We are seeking a dynamic and result-oriented Fire protection Engineer to drive business growth for our Fire Protection and Fire & Gas (F&G) Engineering Consultancy services. The successful candidate will be responsible for identifying new business opportunities, developing client relationships, preparing technical and commercial proposals, and converting opportunities into awarded projects across the Oil & Gas, Petrochemical, Industrial, Power, Infrastructure, and Commercial sectors.</p><p>Identify and develop new business opportunities for Fire Protection and Fire & Gas Engineering Consultancy services.</p><p>Develop and maintain a database of End Clients, EPC Contractors, PMC Consultants, and Industrial Customers.</p><p>Generate qualified leads through market research, networking, industry events, and client engagement.</p><p>Build strong relationships with key decision-makers within client organizations.</p><p>Conduct client meetings to understand project requirements and identify engineering consultancy opportunities.</p><p>Deliver technical and business presentations showcasing the company's capabilities and value proposition.</p><p>Coordinate with the engineering team to develop technical solutions and commercial proposals.</p><p>Prepare, submit, and negotiate technical and commercial proposals.</p><p>Follow up on submitted proposals and actively drive opportunities through to Purchase Order (PO) award.</p><p>Maintain an opportunity pipeline and provide regular sales forecasts and progress reports.</p><p>Monitor market trends, competitor activities, and upcoming projects.</p><p>Support prequalification submissions, vendor registrations, and framework agreements.</p><p>Participate in exhibitions, conferences, and industry networking events to enhance business visibility.</p><p>Business Development</p><p>Technical Sales</p><p>Client Relationship Management</p><p>Proposal Preparation</p><p>Lead Generation</p><p>Tender Management</p><p>Presentation Skills</p><p>Negotiation Skills</p><p>Market Intelligence</p><p>Strategic Planning</p><p>Number of new clients developed.</p><p>Number of qualified opportunities generated.</p><p>Value of proposals submitted.</p><p>Proposal-to-order conversion rate.</p><p>Annual sales/revenue achieved.</p><p>Customer satisfaction and retention.</p><p>Growth of key accounts and repeat business.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Mechanical, Fire Protection, Instrumentation, Electrical Engineering, or a related discipline.</li><li>10+ years of experience in business development, sales, or technical marketing within Fire Protection, Fire & Gas Consultancy.</li><li>Experience in Oil & Gas, Petrochemical, Industrial, Power, Infrastructure, or Commercial projects.</li><li>Knowledge of Fire Protection Systems, Fire Detection & Alarm Systems, Gas Detection Systems, Passive Fire Protection.</li><li>Experience in the field of Sales and business development in Fire Protection and Fire & Gas detection system Vendors in Kuwait</li><li>Familiarity with NFPA, API, IEC, FM, ISO, and client standards (e.g., KNPC, KOC and Other industrial clients) is an advantage.</li><li>Proven experience in proposal preparation, client presentations, and contract negotiations.</li><li>Excellent communication, presentation, negotiation, and interpersonal skills.</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook);</li><li>Valid Kuwait driving license is preferred.</li></ul><p></p></section>
الكويت
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><span><strong>About us</strong> </span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions. </span></p><br><p><span><strong>Primary Objective</strong></span></p><br><p><span>Lead all design and drafting activities related to the discipline for the assigned asset.</span> </p><br><p><span><strong>Why This Role Matters</strong></span></p><br><p><span>You will play a key role in delivering safe, sustainable infrastructure by leading a high-performing team and ensuring engineering excellence across all phases of the project. Your regional experience and PMC background will be critical in navigating project complexity and delivering value to our clients.</span></p><br><p><span><strong>What You Will Do</strong></span></p><br><ul><li><span>Work with design teams to establish appropriate equipment arrangements and piping layouts.</span></li><li><span>Prepare original designs, specifications, and reports, and coordinate with drafters/designers and supervising engineers.</span></li><li><span>Review drawings, models, and submittals; maintain familiarity with piping, pipe stress, and pipe supports.</span></li><li><span>Ensure the level of design work aligns with the complexity of construction tasks, maintaining an appropriate balance between design and implementation costs.</span></li><li><span>Ensure feedback from supervisors and/or superintendents confirms that constructability issues are adequately addressed and that work packs contain sufficient and relevant detail.</span></li><li><span>Conduct site investigations and prepare reports.</span></li><li><span>Prepare detailed designs in conjunction with engineers.</span></li><li><span>Apply Quality Assurance requirements and work within the relevant guidelines of the business unit.</span></li><li><span>Promote safe working practices and ensure compliance with OH&S procedures.</span></li></ul> <p><span><strong>What You Will Bring</strong></span></p><br><ul><li><span>Advanced engineering drafting and checking capability.</span></li><li><span>Ability to produce 2D drawings using computer-aided design systems.</span></li><li><span>Ability to produce 3D drawings using computer-aided design systems.</span></li><li><span>Demonstrated experience working in the Middle East project environment.</span></li><li><span>Experience working in a PMC (Project Management Consultancy) environment.</span></li></ul><p><span><strong>Qualifications / Experience</strong></span></p><br><ul><li><span><span>Full-time Bachelor’s Degree in Mechanical or Piping Engineering from an accredited university.</span></span></li><li><span><span>Minimum 15 years of total experience post graduate studies.</span></span></li><li><span><span>Minimum 10 years of experience in the oil & gas, refinery, or petrochemical industry.</span></span></li><li><span><span>Minimum 5 years of experience as a Lead Design Engineer or equivalent.</span></span></li><li><span><span>Previous experience working with a contractor or in a comparable delivery model.</span></span></li></ul><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>