وظائف محلل مالي في الكويت

<p>WAREHOUSE TECHNICIAN IV - Secret Clearance Required SSA Operations Workers execute all functional tasks across Receiving, Issuing, Stock Control, Turn In, MHE Operations, and COMSEC Control. They ensure timely processing of materiel, accurate accountability, safe handling, proper documentation, and compliant execution of GCSS - Army workflows. Workers support the full cycle of SSA operations including receipt, storage, issue, inventory, retrograde, and sensitive item handling.MEANINGFUL WORK AND PERSONAL IMPACTReceive, off load, inspect, verify, and process inbound materiel from CRSP, FRP, retrograde, and commercial carriers.Match documentation including TCNs, MROs, manifests, NIINs, quantities, and condition codes.Process receipts, issues, and turn ins in GCSS Army per EUM+ procedures.Stage, segregate, and properly label materiel for storage, issue, or further processing.Perform binning, storage, consolidation, and location maintenance for all classes of supply.Pick, pull, stage, and prepare outbound materiel for issue or shipment.Conduct daily inventories, cyclic counts, sensitive item checks, and location surveys.Identify, segregate, and document discrepant, unserviceable, or litigated materiel.Operate forklifts, pallet jacks, and MHE to safely move materiel.Support turn in processing including cleaning, draining, palletizing, tagging, and documentation.Handle COMSEC and CCI materials with proper stamping, segregation, and controlled access procedures.Maintain daily workload logs, intake forms, issue logs, MRO logs, and customer service records.Support retrograde, redistribution, and FOI processing under supervisor direction.Assist customers with pick lists, verification, PGR processing, and issue documentation.Ensure housekeeping, safety, PPE compliance, and proper storage of hazardous materials.Maintain audit ready records and support causative research and discrepancy resolution.Execute work in extreme heat environments safely and effectively.</p><p><strong>Desired Candidate Profile</strong></p><p>WHAT YOU LL NEED TO SUCCEEDHS Diploma or equivalent.5+ years of experienceExperience in warehouse, supply, or materiel handling operations preferred.Basic familiarity with Army supply procedures, materiel accountability, and warehouse tasks.Ability to learn and use GCSS Army for receipts, issues, MRO processing, and location management.Ability to operate forklifts and MHE safely (training provided).Ability to follow instructions, work in teams, and perform physically demanding tasks.Ability to handle sensitive and controlled items in compliance with security rules.Strong attention to detail when verifying materiel, documentation, and quantities.Ability to work in austere, deployed, and extreme heat environments.Valid passport and ability to meet deployment screening requirements.Ability to stand, lift, carry, and move materials for extended periods.(40 lbs)Strong communication and problem-solving skills.Ability to meet LOGCAP V deployment requirements.Active U.S. Secret clearance.Valid U.S. passport and ability to meet CRC requirements.Willingness to deploy to SWA or other assigned locations.CERTIFICATIONSHAZMAT / HAZCOM certification (required or obtainable after hire).Theater required certifications (AT, OPSEC, Cyber, etc.).Forklift / MHE certification (provided after hire).</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Network Administrator I GBS will setup, operate, maintain and provide technical support of the Global Broadcast Service suite in support of United States Army Central (USARCENT) and Combined Joint Task Force (CJTF). The position provides “in the field” support on the GBS system to USARCENT. Assist project managers, Communication Electronic Command representatives, and other technicians in the maintenance, troubleshooting and deployment of the GBS system. Personnel must exhibit sound judgment and maturity to interact with senior officers, NCOs, and DOD civilians. Being able to work in a team environment is paramount. Technicians are subject to deployments throughout the AOR as required. This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Transport, setup, and take down the GBS receive equipment suite. + Provide technical assistance on the GBS suite to military and civilian component staff. + Program and operate the GBS Remote Broadcast Manager (RBM) and Joint Internet Protocol Modem (JIPM). + Use GBS User Specific (GUS) communication software to control and monitor satellite information. + Set and modify TCP/IP parameters on all GBS specific equipment. + Resolve customer interface/user issues. + Build, install, troubleshoot, and repair Ethernet cables. + Configure and maintain network switches and firewalls used by the GBS suite. + Connect the GBS suite to standalone NIPR and SIPR computers. + Troubleshoot, identify, and resolve satellite communication issues. + Report on GBS outages according to Vectrus/USANEC-A guidelines. + Program and connect Set Top Box (STB) to user video displays. + Program and operate the KG-250 encryption device. + Performs other duties and assignments assigned. Qualifications + Qualifications + Security Clearance: + Requires an active Secret Clearance. + Education / Certifications: One-year related experience may be substituted for one year of education if degree is required. + Associate Degree in Information Technology (IT) or a related field is preferred. + This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. + The authorized certifications for this job title are listed as follows: + Baseline: + Cisco: CCNA: Certified Network Associate - Security (Cannot be used as a dual qualifier) + Cisco: CCNP: Certified Network Professional - Security (Cannot be used as a dual qualifier) + CompTIA: CASP+ ce: Advanced Security Practitioner + CompTIA: CySA+ ce: Cybersecurity Analyst + CompTIA: Security+ ce + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler: Certified Incident Handler + GIAC: GICSP: Industrial Cyber Security Professional + GIAC: GSEC: Security Essentials + ISACA: CISA: Certified Information Systems Auditor + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + ISC2: SSCP: Systems Security Certified Practitioner + Computing Environment (CE): + Cisco: CC-DN-P: DevNet Professional + Cisco: CCIE: Certified Internetwork Expert - Collaboration + Cisco: CCIE: Certified Internetwork Expert - Enterprise Infrastructure + Cisco: CCIE: Certified Internetwork Expert - Enterprise Wireless + Cisco: CCIE: Certified Internetwork Expert - Routing &amp; Switching + Cisco: CCIE: Certified Internetwork Expert - Security + Cisco: CCIE: Certified Internetwork Expert - Service Provider + Cisco: CCNA: Certified Network Associate + Cisco: CCNA: Certified Network Associate - Routing and Switching + Cisco: CCNA: Certified Network Associate - Security ( Cannot be used as a dual qualifier ) + Cisco: CCNA: Certified Network Associate: Service Provider + Cisco: CCNP: Certified Network Professional - Security ( Cannot be used as a dual qualifier ) + Cisco: CCNP: Certified Network Professional - Collaboration + Cisco: CCNP: Certified Network Professional - Enterprise + Cisco: CCNP: Certified Network Professional - Routing &amp; Switching + Cisco: CCNP: Certified Network Professional - Service Provider + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + Requires two (2) years of experience in a networking environment. + Experience with a customer service-oriented company. + Skills &amp; Technology Used: + Proficiency in using a computer - desktop or laptop. + Proficiency in using Microsoft productivity software. + Proficiency in using Email client software. + Proficiency in satellite system operations. + Proficiency in IP routing and Cisco IOS. + Working Environment + The work environment will be 95% indoors and 5% outdoors. + The outdoor work environment may exceed temperatures 100° F. Candidate must be able to physically withstand extreme heat. Physical Requirements + Must be capable of lifting, pushing, and pulling items weighing up to 50 lbs. + Must be capable of wearing Personal Protective Equipment (helmet and plated vest) which can weigh 25 to 40lbs, for extended periods of time. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients. #LI-YG1 #clearance</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the general direction of the Fire Chief, responsible for implementing LOGCAP V Fire Protection Plan and ensuring emergency response operations are conducted within the guidelines stipulated by this plan and the Emergency Management Plans. Reports directly to the Assistant Fire Chief of Operations. Directs and leads firefighters during firefighting operations, rescue operations, hazardous materials incidents and other related emergencies events. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Implements the fire protection programs that conform to the Performance Work Statement. Implements and maintains a safe workplace, ensuring safety is the highest priority. Complies with all Environmental, Health, and Safety (EHS) and Quality Assurance (QA) requirements and goals. Provides documentation to these divisions as necessary to ensure adequate and legal documentation. Ensure that all subordinate employees are trained and understand EHS and QA requirements and goals. Maintains documentation as necessary to meet these requirements. (10%) + Conducts fire inspections and ensures that facilities are safe, and documentation is recorded and tracked. Operates computerized digital fire alarm receiving equipment including two-way radio communications equipment. Performs additional logistical duties in support of fire department operations to include, maintaining accountability of equipment, scheduling maintenance of equipment, coordinating appointments of subordinates, and other administrative duties as needed. (10%) + Ensures that emergency equipment under the control of the fire department is operational and in a state of readiness as required by NFPA or other industry standards. Responds to emergencies, disasters, and hazardous material (HAZMAT) spills according to the responsibilities identified in the department work instructions, standard operating procedures or the Emergency Management plan. Serves as the team leader for either a rescue unit, ladder truck, engine company, water tender or airport crash apparatus. Enters burning or contaminated structures, vehicles, and other immediately dangerous to life and health areas to fight fires and/or perform rescues while wearing required personal protective equipment. Directs Crew Chief/Company Officer level operations for structural fires, aircraft fires, rescue operations, medical emergencies, hazardous materials responses and other emergency events as directed. (45%) + Provides supervision to Fire-fighters. Required to maintain and clean personal protective equipment and supervise firefighters in cleaning equipment and facilities. Performs duties in support of organizational metrics. Trains and orients subordinate employees on performance, documentation, and activities that effect the achievement of department metrics. Adequately and honestly tracks all data related to metrics. Supports the achievement of LCV metrics, whether metrics can be directly or indirectly affected by this position’s activities. Provides direct support, using staff resources, if necessary, to the achievement of all metrics related to the PWS and LOGCAP. Attends meeting in the absence of the supervisor or as needed. (25%) + Communicates professionally, both orally and in writing, with their subordinates and others as needed to relay information necessary for job success. This includes, but is not limited to, staff meetings, performance appraisals, job requirements, division metrics, projects, quality standard procedures, and safety practices. + Works to achieve LOGCAP goals and PWS commitments. Performs other duties as required. (10%) Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Driver’s License, is required. + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Heavy Driver’s License, is required. + High School diploma or equivalent (Associate Degree in Fire Science preferred) + DoD, Pro-board or International Fire Services Accreditation Congress Certification as: + Must meet training and certification requirements outlined in DOD Manual 6055.06. Fire Officer II, Fire Instructor I, Fire Inspector I, Hazmat Operations and Incident Commander, Driver Operator Pumper, Driver Operator Mobile Water Supply MWS, Driver Operator ARFF, Driver Operator Aerial, Airport Firefighter, HazMat Technician preferred, Emergency Medical Technician (EMT) or higher preferred + Experience: + Requires 5 years with an organized Fire or Emergency Service Department. Two years of experience at the level of Company Officer is preferred. + Skills: + Possess the ability to demonstrate leadership and management skills in a professional demeanor. + Ability to work effectively with employees and management personnel at all levels to include multinational staff, superiors and ranking military officers. + Ability to exercise discretion and good judgment, with an ability to understand the effect of decisions overall in the company. + Strong interpersonal and negotiation skills, ability to communicate in English, both verbally and written, some proficiency in Word, Excel, and Outlook applications are required. + High level of organizational and planning skill so that workflow is managed efficiently, and accuracy is required. + Detail oriented with a high degree of accuracy and the ability to effectively respond to inquiries or complaints both verbally and in writing. + Supervisory/Budget Responsibilities: + Must have extensive knowledge of fire department operations to include advanced knowledge of leadership and supervisory techniques. + Must have advanced knowledge of Fire Department functions and responsibilities and a thorough understanding of Incident Command System (ICS). + This is a first level supervisor position and will supervise two to six firefighters. + Working Conditions: + Duties will involve the conduct of work in the outdoors with a potential exposure to extreme climatic conditions including frequent dust storms and high temperatures up to 130 degrees in the summer months. + Potential exposure to chemical or biological agents could exist. + Employee use of personal protective equipment (PPE) in certain areas is required. + Such PPE includes but is not limited to head, foot, hand, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire Department, company safety department and Army safety policies. + Must be able to respond and work in all types of weather and in less-than-ideal conditions and may have to enter hazardous environment. . + Must be able climb ladders to gain access to upper levels of buildings, or to rescue individuals from burning structures or when trapped. + Physical Requirements: + Must meet or exceed physical requirements contained in the current edition NFPA 1582, including but not limited to the physical strength and ability to perform heavy and strenuous tasks for extended periods of time under dangerous and uncomfortable conditions, often while wearing bulky protective gear, including self-contained breathing apparatus. + Must be able to exert force (defined as strenuous activity) sufficient to lift and carry up to 200 pounds of body weight and occasionally, as a team member, to lift and maneuver onto a gurney body weight up to 600 pounds, or as necessary lift whatever weight is required to handle the emergency or rescue requirement. Must be able to carry out strenuous lifting in spaces where use of correct lifting techniques is not possible, as required. Must be available for recall and manage personnel issues off duty. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

Sales <br><br> Job Id :100195339<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Urgent Requirement for Outdoor Sales Executive & Forklift Technician<br><br>Outdoor Sales Executive – Kuwait<br><br>We are looking for an experienced Outdoor Sales Executive to join our team. Our Products are :Diesel Forklifts,LPG / Petrol Forklift Trucks,Internal Combustion Forklifts,Electric Counterbalance Trucks,Electric Reach Trucks,Electric Tri-Lateral Stackers / VNA,Electric High Lift Order Pickers,Electric Platform Scissor Lifts,Electric Pedestrian Pallet Trucks,Electric Stackers,Hand Pallet Trucks.<br><br>Our service includes Forklift Services,Maintenance and repair for electric, diesel and LPG trucks. Industrial Services,Dock, door, conveyor and facility support. Warehouse Technology,Inventory control and warehouse systems.<br><br>Requirements<br><br>Minimum 3 years of experience in retail/outdoor sales.<br><br>Excellent communication and customer-handling skills.<br><br>Strong knowledge of the Kuwait market is preferred.<br><br>Candidates from Kerala are preferred.<br><br>Ability to achieve sales targets and develop new customers.<br><br>Willingness to visit customers, take orders, and generate new business.<br><br>Ability to maintain strong and long-term relationships with customers.<br><br>A valid Article 18 transferable visa is required.<br><br>Immediate joining is preferred.<br><br>A valid Kuwait driving license and personal car are mandatory.<br><br>If you meet the above requirements and are interested in joining our team, please send your updated CV to:<br><br>???? info@mgtckw.com<br><br>Urgent Requirement – Forklift Technician<br><br>We are looking for an experienced Forklift Technician to join our team in Kuwait.<br><br>Key Responsibilities<br><br>Diagnostics & Repair: Identify and repair faults in forklift engines, electrical systems, hydraulic systems, and mechanical components.<br><br>Preventive Maintenance: Conduct regular inspections, servicing, and preventive maintenance to minimize unexpected equipment breakdowns.<br><br>Troubleshooting: Handle emergency repairs and breakdowns at warehouses, ports, industrial sites, and other customer locations.<br><br>Safety Compliance: Ensure all repaired and maintained equipment complies with applicable local and international safety standards.<br><br>On-Site Service: Travel to different customer and warehouse locations across Kuwait to provide maintenance and repair services.<br><br>Job Requirements<br><br>Education: Diploma or ITI qualification in Mechanical or Electrical Engineering.<br><br>Experience: Minimum 3 to 8 years of hands-on experience working with Material Handling Equipment (MHE), including forklifts, reach trucks, pallet jacks, etc.<br><br>Technical Skills: Strong knowledge of diesel and electric systems, hydraulic systems, and mechanical components.<br><br>Experience with brands such as Toyota, Linde, or Jungheinrich will be a major advantage.<br><br>Ability to work independently and handle on-site service and repair requirements.<br><br>Willingness to travel to different customer/warehouse locations in Kuwait.<br><br>Transferable Article 18 (Ahli) visa is required.<br><br>Candidates of any nationality may apply.<br><br>Immediate joining is preferred.<br><br>If you meet the above requirements and are interested in joining our team, please send your updated CV to:<br><br>???? info@mgtckw.com<br><br>Jobboard subscription<br><br>Basic Details<br><br>Location : Fahaheel , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : info@mgtckw.com

<p>Five Rivers Analytics is looking for a Service Desk Administrator to work in Camp Arifjan, KW. To join our team of outstanding professionals, apply today! Our Service Desk Administrator provides front-line customer service desk support, responsible for responding to and resolving computer, printer, and network issues. Customers contact the Service desk in-person, by phone, using ServiceNow and/or by sending emails. This position involves a high degree of quick decision making and detailed task management to ensure all work orders not resolved at the Service Desk are immediately assigned to the appropriate IT groups. Excellent customer service skills are mandatory.</p><h4><b><br></b></h4><h4><b>Responsibilities</b></h4><ul><li>Primary support and interface with site Information Management Officers (IMO) to ensure all Service Desk resources are utilized in the most efficient manner. Assists the IMO with daily functions of computer, network and software management for the site and all users.</li><li>Provides immediate response to all customers who come to the Service Desk. Person-to-person interaction involves troubleshooting, information exchange and help with ticket submission and issues. Excellent interpersonal skills are required.</li><li>Provides telephone customer support for incoming and follow up calls used for initial troubleshooting.</li><li>May be required to work for 12-hour shifts utilizing ServiceNow call management software and other tools, to log and manage trouble tickets. Must have the technical ability to accurately determine call routing for trouble tickets that cannot be resolved immediately at the Service Desk.</li><li>Troubleshoots Microsoft OS issues on Army Gold Master/Universal Gold Master along with setup and Microsoft Office 2007. Troubleshoots all other site authorized software with IMOs and users.</li><li>Creates logon and email accounts using Microsoft Exchange Server and User Manager. Manages Network Services with Server Manager, Print Queue Management and CISCO VMPS Administration.</li><li>Works within a small continuous improvement focused team.</li><li>Tracks and documents work performed to allow accurate reporting of all Service Desk activities.</li><li>Completes all tasks and assignments as requested by Supervisors and Management.</li><li>Performs other duties and assignments as required.</li></ul><h4>Qualifications</h4><ul><li>Must be a US citizen with an active Secret clearance, or higher level, security clearance.</li><li>High school diploma or GED with at least one (1) year experience in a service desk/help desk environment.</li><li>Prerequisite requirements for State-side applicants: valid U.S. passport, must be able to obtain and maintain an International Driver s Permit (IDP), valid U.S. driver s license, and the ability to successfully pass a police clearance check and medical qualifications.</li><li>Prerequisites for in-country applicants: valid U.S. passport, valid International Driver s Permit (IDP) or Kuwait-issued driver's license, valid U.S. driver s license, medical qualifications, self-identify current visa sponsor &amp; employer, and a copy of your Civil ID and/or work visa.</li><li>Must be able to pass a details medical and dental exam.</li><li>Must be able to complete CONUS Replacement Center (CRC) Training for deployment overseas.</li><li>Must have a working knowledge of Microsoft Office software.</li><li>Demonstrated strong customer service skills are mandatory.</li><li><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must be a US citizen with an active Secret clearance, or higher level, security clearance.</li><li>High school diploma or GED with at least one (1) year experience in a service desk/help desk environment.</li><li>Prerequisite requirements for State-side applicants: valid U.S. passport, must be able to obtain and maintain an International Driver s Permit (IDP), valid U.S. driver s license, and the ability to successfully pass a police clearance check and medical qualifications.</li><li>Prerequisites for in-country applicants: valid U.S. passport, valid International Driver s Permit (IDP) or Kuwait-issued driver's license, valid U.S. driver s license, medical qualifications, self-identify current visa sponsor &amp; employer, and a copy of your Civil ID and/or work visa.</li><li>Must be able to pass a details medical and dental exam.</li><li>Must be able to complete CONUS Replacement Center (CRC) Training for deployment overseas.</li><li>Must have a working knowledge of Microsoft Office software.</li><li>Demonstrated strong customer service skills are mandatory.</li><li>Certifications:This position requires candidates to adhere to DoD 8570.01-M: all candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. The authorized certifications for this job title are listed as follows: IAT Level I Baseline: + Cisco: CCNA: Certified Network Associate - Security + Cisco: CCNP: Certified Network Professional - Security + CompTIA: A+ ce + CompTIA: CASP+ ce: Advanced Security Practitioner (ended 17 Dec 2024) + CompTIA: Network+ ce + CompTIA: Security+ ce + CompTIA: SecurityX ce + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler: Certified Incident Handler + GIAC: GICSP: Industrial Cyber Security Professional + GIAC: GSEC: Security Essentials + ISACA: CISA: Certified Information Systems Auditor + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + ISC2: SSCP: Systems Security Certified Practitioner Computing Environment (CE) Certification: + CompTIA: Server+. + Microsoft: 365 Certified: Modern Desktop Administrator Associate. + Microsoft: MCSA: Windows 10. + Microsoft: MCSA: Windows Server 2012. + Microsoft: MCSA: Windows Server 2016. + Microsoft: MCSE: Cloud Platform and Infrastructure. + Microsoft: MCSE: Enterprise Devices and Apps. + Microsoft: MCSE: Private Cloud 2012. + Microsoft: MCSE: Server Infrastructure 2012. + Microsoft: MCT: Certified IT Professional. + Microsoft: MCT: Certified Systems Administrator. + Microsoft: 365 Certified: Endpoint Administrator Associate. + Microsoft: 365 Certified: Enterprise Administrator Expert. + Microsoft: 365 Certified: Messaging Administrator Associate. + Microsoft: 365 Certified: Modern Desktop Administrator Associate. + Microsoft: 365 Certified: Security Administrator Associate. Microsoft: Certified: Azure Administrator Associate. + Microsoft: Certified: Azure Database Administrator Associate. + Microsoft: Certified: Azure Security Engineer Associate. + Microsoft: Certified: Azure Solutions Architect Expert. + Microsoft: Certified: Identity and Access Administrator Associate. + Microsoft: Certified: Information Protection Administrator Associate. + Microsoft: Certified: Security Operations Analyst Associate. + Microsoft: MCSA: SQL 2016 Database Admin. + Microsoft: MCSA: SQL 2016 Database BI Development. + Microsoft: MCSA: SQL 2016 Database Dev. + Microsoft: MCSE: Core Infrastructure. + Microsoft: MCSE: Database Management and Analytics. + Microsoft: MCSE: Productivity Solutions Expert.</li></ul>

<p>Five Rivers Analytics is looking for a Service Desk Administrator to work in Camp Arifjan, KW. To join our team of outstanding professionals, apply today! Our Service Desk Administrator provides front-line customer service desk support, responsible for responding to and resolving computer, printer, and network issues. Customers contact the Service desk in-person, by phone, using ServiceNow and/or by sending emails. This position involves a high degree of quick decision making and detailed task management to ensure all work orders not resolved at the Service Desk are immediately assigned to the appropriate IT groups. Excellent customer service skills are mandatory.</p><h4><b>Responsibilities</b></h4><ul><li>Primary support and interface with site Information Management Officers (IMO) to ensure all Service Desk resources are utilized in the most efficient manner. Assists the IMO with daily functions of computer, network and software management for the site and all users.</li><li>Provides immediate response to all customers who come to the Service Desk. Person-to-person interaction involves troubleshooting, information exchange and help with ticket submission and issues. Excellent interpersonal skills are required.</li><li>Provides telephone customer support for incoming and follow up calls used for initial troubleshooting.</li><li>May be required to work for 12-hour shifts utilizing ServiceNow call management software and other tools, to log and manage trouble tickets. Must have the technical ability to accurately determine call routing for trouble tickets that cannot be resolved immediately at the Service Desk.</li><li>Troubleshoots Microsoft OS issues on Army Gold Master/Universal Gold Master along with setup and Microsoft Office 2007. Troubleshoots all other site authorized software with IMOs and users.</li><li>Creates logon and email accounts using Microsoft Exchange Server and User Manager. Manages Network Services with Server Manager, Print Queue Management and CISCO VMPS Administration.</li><li>Works within a small continuous improvement focused team.</li><li>Tracks and documents work performed to allow accurate reporting of all Service Desk activities.</li><li>Completes all tasks and assignments as requested by Supervisors and Management.</li><li>Performs other duties and assignments as required.</li></ul><h4><b>Qualifications</b></h4><ul><li>Must be a US citizen with an active Secret clearance, or higher level, security clearance.</li><li>High school diploma or GED with at least one (1) year experience in a service desk/help desk environment.</li><li>Prerequisite requirements for State-side applicants: valid U.S. passport, must be able to obtain and maintain an International Driver s Permit (IDP), valid U.S. driver s license, and the ability to successfully pass a police clearance check and medical qualifications.</li><li>Prerequisites for in-country applicants: valid U.S. passport, valid International Driver s Permit (IDP) or Kuwait-issued driver's license, valid U.S. driver s license, medical qualifications, self-identify current visa sponsor &amp; employer, and a copy of your Civil ID and/or work visa.</li><li>Must be able to pass a details medical and dental exam.</li><li>Must be able to complete CONUS Replacement Center (CRC) Training for deployment overseas.</li><li>Must have a working knowledge of Microsoft Office software.</li><li>Demonstrated strong customer service skills are mandatory.</li><li>Certifications:This position requires candidates to adhere to DoD 8570.01-M: all candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. The authorized certifications for this job title are listed as follows:IAT Level I Baseline:<ul><li>Cisco: CCNA: Certified Network Associate - Security</li><li>Cisco: CCNP: Certified Network Professional - Security</li><li>CompTIA: A+ ce</li><li>CompTIA: CASP+ ce: Advanced Security Practitioner (ended 17 Dec 2024)</li><li>CompTIA: Network+ ce</li><li>CompTIA: Security+ ce</li><li>CompTIA: SecurityX ce</li><li>GIAC: GCED: Certified Enterprise Defender</li><li>GIAC: GCIH: Certified Incident Handler: Certified Incident Handler</li><li>GIAC: GICSP: Industrial Cyber Security Professional</li><li>GIAC: GSEC: Security Essentials</li><li>ISACA: CISA: Certified Information Systems Auditor</li><li>ISC2: CISSP (or Associate): Certified Information Systems Security Professional</li><li>ISC2: SSCP: Systems Security Certified Practitioner</li></ul>Computing Environment (CE) Certification:<ul><li>CompTIA: Server+.</li><li>Microsoft: 365 Certified: Modern Desktop Administrator Associate.</li><li>Microsoft: MCSA: Windows 10.</li><li>Microsoft: MCSA: Windows Server 2012.</li><li>Microsoft: MCSA: Windows Server 2016.</li><li>Microsoft: MCSE: Cloud Platform and Infrastructure.</li><li>Microsoft: MCSE: Enterprise Devices and Apps.</li><li>Microsoft: MCSE: Private Cloud 2012.</li><li>Microsoft: MCSE: Server Infrastructure 2012.</li><li>Microsoft: MCT: Certified IT Professional.</li><li>Microsoft: MCT: Certified Systems Administrator.</li><li>Microsoft: 365 Certified: Endpoint Administrator Associate.</li><li>Microsoft: 365 Certified: Enterprise Administrator Expert.</li><li>Microsoft: 365 Certified: Messaging Administrator Associate.</li><li>Microsoft: 365 Certified: Modern Desktop Administrator Associate.</li><li>Microsoft: 365 Certified: Security Administrator Associate.</li><li>Microsoft: Certified: Azure Administrator Associate.</li><li>Microsoft: Certified: Azure Database Administrator Associate.</li><li>Microsoft: Certified: Azure Security Engineer Associate.</li><li>Microsoft: Certified: Azure Solutions Architect Expert.</li><li>Microsoft: Certified: Identity and Access Administrator Associate.</li><li>Microsoft: Certified: Information Protection Administrator Associate.</li><li>Microsoft: Certified: Security Operations Analyst Associate.</li><li>Microsoft: MCSA: SQL 2016 Database Admin.</li><li>Microsoft: MCSA: SQL 2016 Database BI Development.</li><li>Microsoft: MCSA: SQL 2016 Database Dev.</li><li>Microsoft: MCSE: Core Infrastructure.</li><li>Microsoft: MCSE: Database Management and Analytics.</li><li>Microsoft: MCSE: Productivity Solutions Expert.</li></ul><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or GED with at least one (1) year experience in a service desk/help desk environment.</li><li>Demonstrated strong customer service skills are mandatory.</li><li>Must be a US citizen with an active Secret clearance, or higher level, security clearance.</li><li>Prerequisite requirements for State-side applicants: valid U.S. passport, must be able to obtain and maintain an International Driver s Permit (IDP), valid U.S. driver s license, and the ability to successfully pass a police clearance check and medical qualifications.</li><li>Prerequisites for in-country applicants: valid U.S. passport, valid International Driver s Permit (IDP) or Kuwait-issued driver's license, valid U.S. driver s license, medical qualifications, self-identify current visa sponsor &amp; employer, and a copy of your Civil ID and/or work visa.</li><li>Must be able to pass a details medical and dental exam.</li><li>Must be able to complete CONUS Replacement Center (CRC) Training for deployment overseas.</li><li>Must have a working knowledge of Microsoft Office software.</li><li>Candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification.</li></ul>

<p>Five Rivers Analytics is looking for a Service Desk Administrator to work in Camp Arifjan, KW. To join our team of outstanding professionals, apply today! Our Service Desk Administrator provides front-line customer service desk support, responsible for responding to and resolving computer, printer, and network issues. Customers contact the Service desk in-person, by phone, using ServiceNow and/or by sending emails. This position involves a high degree of quick decision making and detailed task management to ensure all work orders not resolved at the Service Desk are immediately assigned to the appropriate IT groups. Excellent customer service skills are mandatory.</p><strong>Responsibilities</strong><ul><li>Primary support and interface with site Information Management Officers (IMO) to ensure all Service Desk resources are utilized in the most efficient manner. Assists the IMO with daily functions of computer, network and software management for the site and all users.</li><li>Provides immediate response to all customers who come to the Service Desk. Person-to-person interaction involves troubleshooting, information exchange and help with ticket submission and issues. Excellent interpersonal skills are required.</li><li>Provides telephone customer support for incoming and follow up calls used for initial troubleshooting.</li><li>May be required to work for 12-hour shifts utilizing ServiceNow call management software and other tools, to log and manage trouble tickets. Must have the technical ability to accurately determine call routing for trouble tickets that cannot be resolved immediately at the Service Desk.</li><li>Troubleshoots Microsoft OS issues on Army Gold Master/Universal Gold Master along with setup and Microsoft Office 2007. Troubleshoots all other site authorized software with IMOs and users.</li><li>Creates logon and email accounts using Microsoft Exchange Server and User Manager. Manages Network Services with Server Manager, Print Queue Management and CISCO VMPS Administration.</li><li>Works within a small continuous improvement focused team.</li><li>Tracks and documents work performed to allow accurate reporting of all Service Desk activities.</li><li>Completes all tasks and assignments as requested by Supervisors and Management.</li><li>Performs other duties and assignments as required.</li></ul><strong>Qualifications</strong><ul><li>Must be a US citizen with an active Secret clearance, or higher level, security clearance.</li><li>High school diploma or GED with at least one (1) year experience in a service desk/help desk environment.</li><li>Prerequisite requirements for State-side applicants: valid U.S. passport, must be able to obtain and maintain an International Driver s Permit (IDP), valid U.S. driver s license, and the ability to successfully pass a police clearance check and medical qualifications.</li><li>Prerequisites for in-country applicants: valid U.S. passport, valid International Driver s Permit (IDP) or Kuwait-issued driver's license, valid U.S. driver s license, medical qualifications, self-identify current visa sponsor &amp; employer, and a copy of your Civil ID and/or work visa.</li><li>Must be able to pass a details medical and dental exam.</li><li>Must be able to complete CONUS Replacement Center (CRC) Training for deployment overseas.</li><li>Must have a working knowledge of Microsoft Office software.</li><li>Demonstrated strong customer service skills are mandatory.</li><li>Certifications:This position requires candidates to adhere to DoD 8570.01-M: all candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. The authorized certifications for this job title are listed as follows: IAT Level I Baseline:<ul><li>Cisco: CCNA: Certified Network Associate - Security</li><li>Cisco: CCNP: Certified Network Professional - Security</li><li>CompTIA: A+ ce</li><li>CompTIA: CASP+ ce: Advanced Security Practitioner (ended 17 Dec 2024)</li><li>CompTIA: Network+ ce</li><li>CompTIA: Security+ ce</li><li>CompTIA: SecurityX ce</li><li>GIAC: GCED: Certified Enterprise Defender</li><li>GIAC: GCIH: Certified Incident Handler: Certified Incident Handler</li><li>GIAC: GICSP: Industrial Cyber Security Professional</li><li>GIAC: GSEC: Security Essentials</li><li>ISACA: CISA: Certified Information Systems Auditor</li><li>ISC2: CISSP (or Associate): Certified Information Systems Security Professional</li><li>ISC2: SSCP: Systems Security Certified Practitioner</li></ul>Computing Environment (CE) Certification:<ul><li>CompTIA: Server+.</li><li>Microsoft: 365 Certified: Modern Desktop Administrator Associate.</li><li>Microsoft: MCSA: Windows 10.</li><li>Microsoft: MCSA: Windows Server 2012.</li><li>Microsoft: MCSA: Windows Server 2016.</li><li>Microsoft: MCSE: Cloud Platform and Infrastructure.</li><li>Microsoft: MCSE: Enterprise Devices and Apps.</li><li>Microsoft: MCSE: Private Cloud 2012.</li><li>Microsoft: MCSE: Server Infrastructure 2012.</li><li>Microsoft: MCT: Certified IT Professional.</li><li>Microsoft: MCT: Certified Systems Administrator.</li><li>Microsoft: 365 Certified: Endpoint Administrator Associate.</li><li>Microsoft: 365 Certified: Enterprise Administrator Expert.</li><li>Microsoft: 365 Certified: Messaging Administrator Associate.</li><li>Microsoft: 365 Certified: Modern Desktop Administrator Associate.</li><li>Microsoft: 365 Certified: Security Administrator Associate.</li><li>Microsoft: Certified: Azure Administrator Associate.</li><li>Microsoft: Certified: Azure Database Administrator Associate.</li><li>Microsoft: Certified: Azure Security Engineer Associate.</li><li>Microsoft: Certified: Azure Solutions Architect Expert.</li><li>Microsoft: Certified: Identity and Access Administrator Associate.</li><li>Microsoft: Certified: Information Protection Administrator Associate.</li><li>Microsoft: Certified: Security Operations Analyst Associate.</li><li>Microsoft: MCSA: SQL 2016 Database Admin.</li><li>Microsoft: MCSA: SQL 2016 Database BI Development.</li><li>Microsoft: MCSA: SQL 2016 Database Dev.</li><li>Microsoft: MCSE: Core Infrastructure.</li><li>Microsoft: MCSE: Database Management and Analytics.</li><li>Microsoft: MCSE: Productivity Solutions Expert.</li></ul><p></p><p><strong>_Any clearance requirements for this position are established by the government contract._</strong></p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Must be a US citizen with an active Secret clearance, or higher level, security clearance.</p><p>High school diploma or GED with at least one (1) year experience in a service desk/help desk environment.</p><p>Prerequisite requirements for State-side applicants: valid U.S. passport, must be able to obtain and maintain an International Driver s Permit (IDP), valid U.S. driver s license, and the ability to successfully pass a police clearance check and medical qualifications.</p><p>Prerequisites for in-country applicants: valid U.S. passport, valid International Driver s Permit (IDP) or Kuwait-issued driver's license, valid U.S. driver s license, medical qualifications, self-identify current visa sponsor &amp; employer, and a copy of your Civil ID and/or work visa.</p><p>Must be able to pass a details medical and dental exam.</p><p>Must be able to complete CONUS Replacement Center (CRC) Training for deployment overseas.</p><p>Must have a working knowledge of Microsoft Office software.</p><p>Demonstrated strong customer service skills are mandatory.</p><p>Certifications:This position requires candidates to adhere to DoD 8570.01-M: all candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>The Service Advisor is responsible to provide professional service to the customers, in terms of accurately recording and organizing quality repair and maintenance services so as to enhance customer retention and facilities the sales of new units in the long term.</p><br> <br><br>Job Responsibilities <br><p><br> Receiving Customer:-<br> •&nbsp;&nbsp; &nbsp;Receive and greet customers, understand their vehicle concerns and advice the service and repair needs, carry out as much visual inspection as possible to advice work required on the vehicle, use manufacturer's recommendations to advice additional work, agree the work scope and obtain cost and time agreement. use available menu pricing for routine jobs, validate customer details and update Kerridge. offer the alternate transport as appropriate&nbsp;<br> 2. Preparing Repair Order and Assign job:-<br> •&nbsp;&nbsp; &nbsp;Write the instructions for technician using RTS for the routine jobs and exact description of symptoms for other concerns describe by customers. Assign the jobs to technicians using Kerridge workshop loading module. Follow up the work progress with respectively team leaders&nbsp;<br> 3. Customer Contact:-<br> •&nbsp;&nbsp; &nbsp;Keep regular contact with customers to keep them abreast of the progress on their vehicles, At least once a day phone contact with every customer is necessary. The contact should be made using Kerridge CRM and updating the contacts record&nbsp;<br> 4. Information, Delivery &amp; Follow Up:-<br> •&nbsp;&nbsp; &nbsp;Inform the customer when vehicle is ready. As much as possible the job details and costs should be informed on the phone, deliver the vehicle on customer arrival with full details of what jobs have been done. Also inform the customers which of the complaints have not been attended (if any) and why. Activity asks the customers if they are satisfied with the jobs done. Immediately escalate to Manager if any customer is not satisfied. with 72 hours of delivery, call the customer to ensure satisfaction, log the call in Kerridge CRM&nbsp;<br> 5. Customer Relations:-<br> •&nbsp;&nbsp; &nbsp;Establish healthy and profitable relationship by proactively communicating and following up with the existing as well as prospective customer on performance of their cars and if they required any service attention so as consolidate and enhances the customer base&nbsp;<br> 6. Come Back jobs:-<br> •&nbsp;&nbsp; &nbsp;All come back jobs should be immediately escalated to Service Supervisor / Service Manager. specific stamp should be applied on the repair order and flag raised using Kerridge, any come back job should not be delivered unless the repair order is signed by Service Manager<br> &nbsp;</p><br> <br><br>Candidate Requirements <br><p>•&nbsp;&nbsp; &nbsp;University graduate or diploma in automobile engineering &nbsp;<br> •&nbsp;&nbsp; &nbsp;Relevant working experience of 5 years in the automotive service industry&nbsp;<br> •&nbsp;&nbsp; &nbsp;Good interpersonal and communication skills in English, Arabic is an advantage&nbsp;<br> •&nbsp;&nbsp; &nbsp;Knowledge of Microsoft office application</p><br> <br><br>Education <br><br><br> </div>

<p>A Fire Lieutenant is a work leader (crew-chief) responsible for directing and participating in the work of the crew of one piece of firefighting apparatus. Typically, the crew chief performs the following. Directs the crew in firefighting activities, working from specific orders from higher level supervisors at the scene; directs and participates in practice drills and training classes for the assigned crew; directs the crew in fire protection inspection functions; assigns crew members to station maintenance work such as cleaning equipment; prepares reports for the supervisor concerning fire runs, training, inspection, or other topics; and takes charge of all firefighting activities at the scene of a fire in the absence of the supervisor. Conducts recurrent proficiency training and OJT. Applies industry standards and accepted trade practices to perform tasks required to execute and accomplish emergency incident objectives and directions. Attends all training, instructs classes as required, and participates in the DoD Firefighter Certification Program and physical fitness programs. Exercises caution to avoid personal injury and property damage. Accountable for meeting the requirements of NFPA 1582 Standard on Comprehensive Occupational Medical Program for Fire Departments and maintains the ability to pass physical fitness exam IAW NFPA 1500, and is subject to drug testing and background investigation. Conducts fire risk management surveys and company inspections. Provides fire safety training and education to the general public, soldiers and other members of the community. Conducts facility inspections and prepares pre-fire plans. Accountable for conducting fire inspections and fire safety programs. Effectively communicates in English both verbally and in writing. Thoroughly understand policies, rules, regulations, practices and procedures of the Fire Department organization. Performs other duties as assigned by the Captain or Assistant Fire Chief. Thoroughly understand policies, rules, regulations, practices and procedures of the Fire Department organization.</p><p><strong>Desired Candidate Profile</strong></p><p>MINIMUM QUALIFICATIONS: High school graduate or equivalent and two (2) years of full-time experience as a paid Firefighter. Associate Degree or higher in Fire Science preferred. Must meet training and certification requirements outlined in DoD Manual 6055.06. Must possess the following certifications from the International Fire Service Accreditation Congress (IFSAC), or from the National Board on Fire Service Professional Qualifications (Pro-Board), or Department of Defense (DoD): Fire Officer I Fire Instructor I Fire Inspector I D/O Pumper D/O ARFF D/O MWS D/O Aerial Hazardous Material Incident Commander (Preferred) HazMat Technician (Preferred) Aircraft Rescue Firefighter (ARFF) Emergency Medical Responder or equivalent with current CPR card (EMT Preferred).</p><p>SKILLS: Possess the ability to demonstrate firefighter knowledge and skills in a professional manner. Ability to work effectively with fellow employees and management personnel at all levels to include multinational staff, and military officials. Strong ability to exercise professional discretion and good judgment and to understand the effect of decisions made. Exhibit strong interpersonal skills and ability to communicate in English both verbally and writing and must have good computer skills in MS-Word, MS-Excel, and MS-Outlook.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The IT Technician role is an exciting opportunity for individuals passionate about technology and problem-solving. As a key player in our IT Services team, you will be responsible for maintaining and supporting our company's IT infrastructure. This position not only offers a chance to work with cutting-edge technology but also provides a pathway for career growth in a dynamic and supportive environment. You will be part of a team that values innovation and encourages continuous learning, ensuring that you are always at the forefront of the latest IT developments.</p><p>In this role, you will engage with various departments to troubleshoot and resolve technical issues, ensuring seamless operations across the organization. Our company prides itself on fostering a collaborative culture where every team member's input is valued. You will have access to training programs and workshops designed to enhance your skills and knowledge, allowing you to progress in your career while contributing to the success of the team.</p><p>As you grow in your position, you will have the opportunity to take on more complex projects and responsibilities, making a significant impact on our IT services. Your contributions will not only improve our internal processes but will also enhance the overall user experience for our employees. Join us in this rewarding journey, where your technical expertise will help shape the future of our IT services.</p><p><b>Responsibilities:</b></p><ol><li>Provide technical support to end-users by diagnosing and resolving hardware and software issues, utilizing problem-solving skills and various support tools to ensure minimal downtime.</li><li>Install and configure computer systems, ensuring that all necessary software is installed correctly and that systems are optimized for performance and security.</li><li>Monitor and maintain network performance, using diagnostic tools to identify and rectify connectivity issues and enhance overall system reliability.</li><li>Assist in the implementation of IT projects, collaborating with cross-functional teams to ensure that project goals are met within established timelines and budgets.</li><li>Document technical processes and procedures, creating user guides and manuals to facilitate knowledge sharing and improve team efficiency.</li><li>Manage inventory of IT equipment, ensuring that all assets are tracked and maintained properly to support organizational needs.</li><li>Provide training and support to employees on new software and technologies, promoting a culture of continuous learning and adaptation to new tools.</li><li>Ensure compliance with IT security policies and best practices, conducting regular audits and assessments to safeguard company data and resources.</li><li>Participate in ongoing professional development, attending workshops and training sessions to stay updated on the latest industry trends and technologies.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in troubleshooting hardware and software issues to ensure efficient IT operations.</li><li>Strong knowledge of network protocols and security measures to protect company data.</li><li>Experience with system installation and configuration for optimal performance.</li><li>Ability to document technical processes clearly for team reference and training.</li><li>Excellent communication skills to effectively support and train end-users.</li><li>Familiarity with IT project management principles to contribute to project success.</li><li>Commitment to continuous learning and professional development in the IT field.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Do you enjoy being part of a successful team?</b></p><br><p><b>Would you like to work with cutting-edge drilling technology?</b></p><br><p><b>Join our Team!</b><br>Our Drilling Services AMO Team is assembling and testing the latest products of drilling equipment which is beating heart of our work. We collaborate with our service delivery teams in science, mechanical and electrical engineering, physics, geoscience, to develop innovative drilling tools.</p><br><p><b>Partner with the best</b></p><br><p>The role is responsible for maintenance, assembly and manufacturing. You will provide specialist support in a variety of technical duties to support the maintenance and reliability initiatives of the organization. You will work unsupervised on a range of Drilling &amp; Evaluation down-hole tools and surface instrumentation within the limit of proven competence.</p><br><p><b>As AMO Electromechanical Technician, you will be responsible for:</b></p><br><ul><li>Reading and interpreting blueprints, wiring diagrams, assembly prints and parts lists and follow formal procedures and maintenance practices.</li><li>Assisting with activities to ensure repairs, scheduled and preventive maintenance on factory equipment are completed on-time and safely.</li><li>Performing quality assurance activities required by manufacturing or engineering specifications and ISO requirements to ensure compliance.</li><li>Collaborating with cross-functional teams and customers to provide technical guidance and troubleshooting knowledge.</li></ul><p><b>Fuel your passion</b></p><br><p>To be successful in this role you will:</p><br><ul><li>Have diploma or any relevant degree</li></ul><ul><li>Have 5+ years maintenance related experience in electro-mechanical drilling function</li><li>Have previous experience with Baker Hughes (preferred)</li><li>Display an advanced mechanical aptitude and experience with general hand tools and precision measuring equipment</li><li>Demonstrate the ability to identify problems and be able to develop solutions.</li></ul><p><b>Work in a way that works for you</b></p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Working flexible hours - flexing the times when you work in the day to help you fit everything in and work when you are the most productive</p><br><p><b>Working with us</b></p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.</p><br><p><b>Working for you</b></p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Contemporary work-life balance policies and wellbeing activities</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Comprehensive private medical care options</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Safety net of life insurance and disability programs</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Tailored financial programs</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Additional elected or voluntary benefits</p><br><p>#LI_Onsite</p><br>The Baker Hughes internal title for this role is: ARMO Tech - Electro Mech IV </div>

<p><strong>Job Details / Position Summary</strong> </p> <p> </p> <p>The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p> <p> </p> <p> <strong>Major Job Activities</strong> </p> <p> </p> <p> <strong>Description:</strong> </p> <ul> <li>Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems.</li> <li>Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. <br> </li> <li>Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins.</li> <li>Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs.</li> <li>Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions</li> <li>Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components</li> <li>Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions.</li> <li>Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data</li> <li>Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control.</li> <li>Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control</li> <li>Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system.</li> <li>Performs applicable O and I level battery maintenance functions as required per applicable maintenance manuals.</li> <li>Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR</li> <li>Performs scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment (life rafts, first aid kits, etc..), pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated aviation life support equipment, airframes, and power plants systems.</li> <li>Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures.</li> <li>Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures</li> <li>Conducts off station maintenance when required.</li> <li>When necessary, perform other duties and functions critical to the support of the program.<strong> <br> </strong> </li> </ul> <br><br><p><strong>Desired Candidate Profile</strong></p><ul> <li><br></li> </ul> <p> <strong>Experience:</strong> </p> <ul> <li>Four years maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred..</li> <li>Must have a working knowledge of first aid procedures to be used in an emergency.</li> <li>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</li> </ul> <p>Must be able to obtain/maintain the following required certifications/qualifications:</p> <ul> <li>Aviation Gas Free Engineering (AVGFE) certification</li> <li>Auxiliary Power Unit (APU) run qualification</li> <li> I Level Battery Maintenance certification</li> <li>Applicable Support Equipment licensing</li> <li>Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification</li> <li>Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification</li> <li>Corrosion Prevention and Control qualification</li> <li>Confined Space Entry certification</li> </ul> <p> <strong>Specific Requirements:</strong> </p> <ul> <li>Must be United States (U.S.) citizen with ability to obtain and maintain a Secret Security clearance.</li> <li>Must be able to read, write, and understand the English language.</li> <li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li> <li>Must have a valid U.S. Driver s License.</li> <li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li> <li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li> <li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.</li> <li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li> <li>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.</li> <li>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.</li> <li>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to: The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance.</li> <li>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O and I level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs.</li> <li>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed.</li> <li>Must have an in-depth knowledge of aircraft technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li> <li>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.</li> <li>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li> <li>Must perform as a team member, contributing to the success of the C-130J maintenance department.</li> <li>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.</li> <li>Must have a proven ability to work independently with minimal direction.</li> </ul>

<p>The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Major Job Activities Description: Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level battery maintenance functions as required per applicable maintenance manuals. Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR Performs scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment (life rafts, first aid kits, etc..), pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated aviation life support equipment, airframes, and power plants systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Conducts off station maintenance when required. When necessary, perform other duties and functions critical to the support of the program.</p><p>Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p><p>Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p><p><strong>Desired Candidate Profile</strong></p><p>Education / Certifications:<br>- High School Diploma<br>- Must be able to obtain/maintain the following required certifications/qualifications:<br>- Aviation Gas Free Engineering (AVGFE) certification<br>- Auxiliary Power Unit (APU) run qualification<br>- I Level Battery Maintenance certification<br>- Applicable Support Equipment licensing<br>- Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification<br>- Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification<br>- Corrosion Prevention and Control qualification<br>- Confined Space Entry certification<br>Experience:<br>Four years maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred.<br>Must have a working knowledge of first aid procedures to be used in an emergency.<br>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).<br>Specific Requirements:<br>Must be United States (U.S.) citizen, be able to read, write, and understand the English language<br>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.<br>Must be able to obtain and maintain at a Secret Security Clearance.<br>Must have a valid U.S. Driver s License.<br>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.<br>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.<br>Must be willing and able to comply with all program functional requirements to include but not limited to:<br>The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.<br>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.<br>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.<br>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.<br>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to:<br>The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance.<br>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O and I level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs.<br>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed.<br>Must have an in-depth knowledge of aircraft technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.<br>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.<br>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.<br>Must perform as a team member, contributing to the success of the C-130J maintenance department.<br>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.<br>Must have a proven ability to work independently with minimal direction.</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice. Essential Responsibilities: Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction. Assist in management of all inspection, maintenance, and storage of munitions and support equipment. Support quality assurance, compliance, continuity, and standardization of munitions programs. Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. Maintain weapons certification and currency. Assist with availability and serviceability of munitions to support and meet customer requirements. Perform all other duties as assigned or requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications :</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years.</li></ul>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair, and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li><strong>Perform basic work in the installation, configuration changes, modification, repair, and adjustment of aircraft armament systems and components.</strong></li> <li><strong>Perform basic maintenance modification, destruction, and demilitarization on ammunition and explosive components.</strong></li> <li><strong>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</strong></li> <li><strong>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</strong></li> <li><strong>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</strong></li> <li><strong>Support quality assurance, compliance, continuity, and standardization of munitions programs.</strong></li> <li><strong>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</strong></li> <li><strong>Maintain weapons certification and currency.</strong></li> <li><strong>Assist with availability and serviceability of munitions to support and meet customer requirements.</strong></li> <li><strong>Perform all other duties as assigned or requested.</strong></li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Plan, conduct, and supervise aircraft technical inspections. Compute basic weight and balance records. Participate in maintenance test flights and operation checks as required. Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration. Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies. Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li><li>Completion of high school or equivalent required. Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li></ul><h2>Knowledge &amp; Skills</h2><ul><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li></ul><h2>Physical Requirements/Working Environment</h2><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty.</p><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components.</p><p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p><p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals.</p><p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p><p>Plan, conduct, and supervise aircraft technical inspections.</p><p>Compute basic weight and balance records.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration.</p><p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies.</p><p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities.</p><p>Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li><li>Completion of high school or equivalent required.</li><li>Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li></ul><h3>Knowledge &amp; Skills</h3><ul><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li></ul><h3>Physical Requirements/Working Environment</h3><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>