وظائف فني كهرباء - الأحمدي الكويت

<p>Should have an Interdisciplinary knowledge in Technical and Commercial document understanding, standards and regulations.</p><p>Should have Minimum 8 years of work experiences in construction/execution, estimation, planning in international EPC/Multi discipline construction companies serving the oil and gas/refinery/petrochemical.</p><p>Hands on experience in generation of MTO’s /BOQ’s from the drawings.</p><p>Able to read and understand GA Drawings, P&amp;IDs.</p><p>&nbsp;</p>

<p>The Mechanical Technician Responsibilities:</p><ul><li>Inspect, repair, maintain, and pressure test Liner Hanger systems and related equipment.</li><li>Disassemble, clean, assemble, and refurbish Liner Hanger tools according to OEM procedures.</li><li>Diagnose equipment failures and perform troubleshooting and corrective maintenance.</li><li>Conduct dimensional inspections, function testing, and quality checks to ensure equipment readiness.</li><li>Complete maintenance records, work orders, and inspection documentation accurately.</li><li>Ensure compliance with HSE, quality, and operational standards.</li><li>Safely operate workshop machinery, lifting equipment, and testing equipment.</li><li>Provide technical support and guidance to junior technicians when required.</li></ul><p>Skills:</p><ul><li>Liner Hanger equipment maintenance and repair and wellbore cleaning WBC and Cementing Head</li><li>Mechanical troubleshooting and failure analysis</li><li>Pressure testing and function testing</li><li>Assembly and disassembly of downhole tools</li><li>Precision measuring and quality inspection</li><li>Reading technical drawings and maintenance procedures</li><li>Root cause analysis and problem-solving</li><li>Strong safety awareness and teamwork</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Engineering or related discipline.</p><p>4 6 years of experience in Liner Hanger equipment repair and maintenance within the Oil &amp; Gas industry.</p><p>Hands-on experience with hydraulic and mechanical Liner Hanger systems, running tools, packers, and related downhole equipment.</p><p>Knowledge of pressure testing, dimensional inspection, and equipment certification processes.</p><p>Forklift, crane, or lifting equipment certification preferred.</p><p>Ability to work in a workshop and field support environment.</p><p>Willingness to travel up to 10% as required.</p>

<p>To provide specialized services related to the design and construction of orthodontic appliances, and to participate in prosthetics work covering both full and partial removable appliances.</p><p>Design and construct the orthodontic appliances for each case by receiving master impression from orthodontic clinic via supervisor and discusses course of action, duration of work and potential problems with supervisor. </p><p>Specialized in the technical aspect of orthodontic work according to the latest technology applied i.e. construct appliances to the specification of the orthodontist by preparing study models, fixing springs, retraction hooks and expansion screws to ensure desired effect, assembling on to a master model, waxing on to a base and processing in acrylic resin.</p><p>Construct both full and partially upper and lower denture by designing wax bite block, selecting teeth and carving them to desired shape, processing with acrylic resin and trimming and polishing. </p><p>Design and construct silver cap splints for (fractured jaws) injuries by preparing a model on an articulator to re-produce patient bites, involves positioning, locking plates and soldering the splints to the locking plates. </p><p>Carries out other related duties such as maintaining workbench equipment in a safe manner, assisting colleagues by undertaking prosthetic activities as workload demands. </p><p><strong>Desired Candidate Profile</strong></p><p>Education: Diploma in Dental Technology plus advanced diploma (or equivalent experiences) from a recognized institution.</p><p>Experience: 6 years.</p><p>Practicing license from Ministry of Health – Kuwait. </p>

<ol><li><p>Overall 6 Years Experience in Construction Project, Instrumentation Works in Oil & Gas / Refinery / Petrochemical Projects & Out of 6 Years, Min. 2 Years in Cost & Estimation Functions.</p></li><li><p>Review of Tender Documents & Preparing Enquiries for Subcontract / Vendor Service works.</p></li><li><p>Must have good computer skills (MS Office).</p></li><li><p>Gulf / Abroad Experience Preferred.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p> B. E. / Btech– Electrical & Electronics (OR) Electronics & Instrumentation Engineering (4 Years Full Time Course) </p>

<ol><li><p>Inventory Control</p></li><li><p>Records maintenance in SAP ERP</p></li><li><p>Coordination between site and warehouse</p></li><li><p>Material allocation</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Should have work experience in electrical construction company</p></li><li><p>SAP ERP working knowledge is preferrable</p><br></li></ol>

<ol><li><p>Overall 6 Years Experience in Construction Project, Instrumentation Works in Oil & Gas / Refinery / Petrochemical Projects & Out of 6 Years, Min. 2 Years in Cost & Estimation Functions.</p></li><li><p>Review of Tender Documents & Preparing Enquiries for Subcontract / Vendor Service works.</p></li><li><p>Must have good computer skills (MS Office).</p></li><li><p>Gulf / Abroad Experience Preferred.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p> B. E. / Btech– Electrical & Electronics (OR) Electronics & Instrumentation Engineering (4 Years Full Time Course) </p>

<ul><li><p>Design and detailed engineering of API 650 and API 620 storage tanks.</p></li><li><p>Review tender documents, client specifications, and design basis.</p></li><li><p>Prepare design calculations for tank shells, roofs, bottoms, nozzles, wind girders, anchor bolts, and foundation loading.</p></li><li><p>Prepare RFQs, Material Requisitions, Technical Specifications, BOQs, and Tank Design Reports.</p></li><li><p>Design Cone Roof, Dome Roof, Internal Floating Roof (IFR), External Floating Roof (EFR), and Aluminium Geodesic Dome Roof tanks.</p></li><li><p>Prepare General Arrangement (GA) drawings, nozzle orientation drawings, plate arrangement drawings, and fabrication detailing.</p></li><li><p>Review vendor drawings, FEA reports, and perform technical bid evaluations.</p></li><li><p>Coordinate with Civil, Process, Piping, Structural, Electrical, and Instrumentation teams.</p></li><li><p>Support fabrication, erection, hydrotesting, commissioning, and troubleshooting.</p></li><li><p>Conduct site surveys and recommend repair or fitness-for-service solutions.</p></li><li><p>Prepare as-built documentation and resolve technical queries.</p></li></ul><p><strong>Codes & Standards</strong></p><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Storage tank engineering</p></li><li><p>Hydrocarbon storage terminals</p></li><li><p>Tank fabrication and erection</p></li><li><p>Welding, inspection, and testing</p></li><li><p>Material selection and corrosion engineering</p></li><li><p>Vendor document review</p></li><li><p>Technical bid evaluation</p></li><li><p>Mechanical design calculations</p></li><li><p>EPC project coordination</p></li><li><p>Strong communication and problem-solving skills</p></li></ol>

<p><strong>Previous Work Experience:</strong></p><p>&nbsp;</p><p>• 10 years’ experience in refining Operations, process plant pre-commissioning/commissioning with an engineering qualification in any discipline or equal experience with a lower qualification; knowledge of process/equipment maintenance.</p><p>• 5 years’ experience in developing Operating &amp; Maintenance procedures or similar documents</p><p>• Possess ability to act as Competency Assessor to multinational workforce.</p><p>• Previous experience of working in the UAE/Middle East/Africa/Asia is essential as is experience of working in a multi discipline, multi-national team.</p><p><br></p><p><strong>Education:</strong></p><p>&nbsp;</p><p>• 12 years of education, GCE ‘O’ Level, or HND in Technology; a recognized degree in Technology/Engineering, Chemical, Mechanical, Process and/or Electrical is preferred.</p><p><br></p><p><strong>Certification:</strong></p><p>A Chartered Engineer or equivalent, preferable.</p><p><br></p><p><strong>Professional Qualifications:</strong></p><p><br></p><p>• Formal Assessor Qualifications. Preferably OPITO, NVQ, TAA, TAE, SQA or equivalent.</p><p>• Formal Train the Trainer qualifications or equivalent desirable.</p><p>• Internal Verification qualifications or equivalent desirable.</p><p><br></p><p><strong style=\

<p>Under broad direction, provides Completion, Products &amp; Services (CPS) job design, well support, and post job analysis to NWA/Country customers. Develops and maintains personal relationship with the technical customer base in designated area. Functions as a communications link between customer, Business Development, and Operations. Advise crews on location to ensure that each project conforms to Halliburton&amp;aposs standards for both quality and safety. Works independently and may provide work direction to others at site. Interpret well site data in real time using complex technologies such as software simulators and the latest electrical and mechanical equipment, calculations, and modeling. Solve on the spot issues remotely and at the well site. Has developed technical competence in one PSL and a general understanding of other Product Service Lines (PSLs). Consults with PSLs regarding equipment needs and specifications. At this level, assignments are generally well defined with clear and specified objectives. Performs assignments requiring knowledge and application of basic engineering principles.</p> <p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p> <p>Location Yard 34, East Ahmadi, Ahmadi, Ahmadi, 61001, Kuwait</p> <p>Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Operations Product Service Line: Completion Tools Full Time / Part Time: Full Time Additional Locations for this position:</p><p><strong>Desired Candidate Profile</strong></p><p>Undergraduate degree required acceptable degrees are: All engineering, Engineering Technology, Geology, Mathematics, Physics, &amp; Chemistry with 18 months industry experience.</p>

<ul><li>Provide immediate medical care and stabilization for injuries and illnesses occurring on the rig, ensuring rapid assessment and treatment.</li><li>Manage and maintain the medical supplies and equipment inventory, including medications, ensuring proper storage and functionality in a remote environment.</li><li>Conduct regular health assessments and screenings for all personnel, promoting proactive health management and early detection of potential issues.</li><li>Administer medications and treatments as prescribed by physicians or standing orders, adhering strictly to medical protocols and safety guidelines.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possesses a valid Registered Nurse (RN) license or equivalent, demonstrating professional nursing qualifications.</li><li>Holds certifications in Advanced Cardiac Life Support (ACLS), and Basic Life Support (BLS) or CPR, showcasing proficiency in emergency medical care.</li><li>Requires a minimum of 3-5 years of experience in an industrial, offshore, or emergency medical setting, indicating relevant experience.</li><li>Experience in the oil and gas industry is highly preferred, demonstrating familiarity with the unique challenges of offshore environments.</li></ul>