وظائف فني انتاج في الكويت

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role &amp; responsibilities Perform quality control (QC) tests on raw materials, ingredients, finished beverages, and packaging materials. Collect and analyze samples from production lines according to quality control procedures. Conduct physical, chemical, and microbiological tests as per PepsiCo quality standards. Test water quality, including pH, hardness, TDS, chlorine, conductivity, and microbiological parameters. Analyze syrup and beverage samples for Brix (sugar content), acidity, CO levels, color, and taste. Verify product specifications before production, during processing, and after packaging. Monitor Critical Control Points (CCPs) in accordance with HACCP and Food Safety Management Systems. Ensure compliance with GMP (Good Manufacturing Practices), HACCP, ISO 22000, and food safety regulations. Calibrate and maintain laboratory instruments such as pH meters, refractometers, spectrophotometers, conductivity meters, and weighing balances. Record, document, and maintain accurate laboratory test results and quality reports. Report non-conforming products immediately and assist in root cause analysis. Support production teams by providing timely quality feedback and corrective actions. Monitor sanitation and hygiene standards in laboratory and production areas. Verify cleaning and sanitation effectiveness through environmental monitoring. Conduct shelf-life and stability testing of finished products. Assist during internal, customer, and external quality audits. Ensure proper storage, handling, and disposal of laboratory chemicals and reagents. Follow laboratory safety procedures and use appropriate Personal Protective Equipment (PPE). Maintain laboratory cleanliness and ensure all equipment is in good working condition. Participate in continuous improvement initiatives to enhance product quality and laboratory efficiency.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma/Bachelor's degree in Food Technology, Food Science, Chemistry, Microbiology, Biotechnology, or a related field. Experience: 25 years in a beverage, soft drink, bottled water, dairy, or food manufacturing company. Experience in multinational FMCG companies such as PepsiCo, Coca-Cola, Nestl, or similar food and beverage manufacturers is highly preferred.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p>Perform preventive, predictive, and corrective maintenance on PLCs, HMIs, SCADA systems, industrial control systems, instrumentation, and automation equipment to ensure maximum system reliability</p><p>Monitor the performance of PLC-controlled production lines, automation systems, and field devices, identifying abnormalities, and implementing corrective actions to maximize equipment availability, reliability, and operational efficiency.</p><p>Diagnose and troubleshoot faults in PLC programs, HMIs, VFDs, servo systems, sensors, actuators, control panels, electrical systems, and industrial communication networks.</p><p>Configure, troubleshoot, maintain, and optimize Variable Frequency Drives (VFDs) and motor control systems, including Danfoss, Siemens, Schneider Electric.</p><p>Conduct routine inspections, functional testing, and preventive maintenance of electrical, instrumentation, and automation equipment to ensure safe, reliable, and efficient operation.</p><p>Support the installation, commissioning, modification, and upgrading of PLC, HMI, SCADA, electrical control panels, instrumentation, and automation systems, ensuring proper testing, and validation.</p><p>Maintain accurate and up-to-date maintenance records, calibration certificates, troubleshooting reports, PLC/HMI program backups, and technical documentation.</p><p>Report shortages of automation spare parts, electrical components, instrumentation devices, and critical maintenance materials to the supervisor</p><p>Analyze recurring equipment failures, identify root causes, and recommend corrective actions and continuous improvement initiatives to enhance automation system reliability and efficiency.</p><p>Collaborate with production, maintenance, engineering, and quality teams to implement process improvements, reduce equipment downtime, improve Overall Equipment Effectiveness (OEE), and support continuous operational excellence.</p><p>Ensure all maintenance, installation, and modification activities comply with company procedures, ISO standards, GMP requirements (where applicable), and applicable electrical and automation regulations.</p><p>&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><p><br></p><p>Qualifications and language:</p><p><br></p><p>Minimum 2 years of experience in the same field – preferable in food production factory.</p><p><br></p><p>Minimum Technical Diploma in Electrical, Electronic, Mechatronic Engineering or Automation Technology.</p><p><br></p><p>English languages (verbal, written). Proficiency in Arabic is a plus.</p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Production Manager – Food Manufacturing</p><p>An experienced and results-oriented Production Manager is sought to lead and oversee complete production operations in the food manufacturing industry. The ideal candidate should possess strong hands-on production experience, excellent leadership skills, and the ability to ensure production targets, quality, efficiency, and food safety standards are consistently achieved.</p><p>Key Responsibilities</p><p>• Lead, plan, and control daily production operations to achieve production targets, quality standards, and timely delivery.</p><p>• Manage, motivate, and develop the production team, including Operators, Production Assistants, and Technicians.</p><p>• Ensure compliance with GMP, ISO, Food Safety, SOPs, and company quality standards.</p><p>• Coordinate with Quality, R&amp;D, Sales, Warehouse, Procurement, and other departments to ensure smooth and efficient production operations.</p><p>• Monitor production performance, KPIs, productivity, waste, downtime, and resource utilization, and implement continuous improvement actions.</p><p>• Ensure availability of raw materials, recipes, manpower, equipment, and other resources required for production.</p><p>• Identify and resolve production and operational problems effectively, including coordination of machine troubleshooting, preventive maintenance, and production-line issues.</p><p>• Monitor finished products and production records to ensure accurate quantities, quality compliance, and proper transfer to the warehouse.</p><p>• Support new product development, production trials, process improvements, and production scale-up in coordination with R&amp;D and Quality.</p><p>• Control production costs and waste while improving efficiency and utilization of manpower, materials, and equipment.</p><p>• Conduct team meetings, assign responsibilities, provide coaching and training, and maintain a safe, clean, and organized production environment.</p><p>Preferred Qualifications &amp; Experience</p><p>1. Bachelor’s or Master’s degree in Production Engineering, Mechanical Engineering, Food Engineering, Food Science, or a related field.</p><p>2. Minimum 5 years of total experience, including at least 2 years in a Production Manager or similar production management role.</p><p>3. Minimum 3 years of experience in Food Manufacturing, FMCG, or Food &amp; Beverage industry.</p><p>4. Strong practical knowledge of production operations, food safety, GMP, ISO, SOPs, and quality standards.</p><p>5. Proven experience in team leadership, production planning, KPI management, problem-solving, and continuous improvement.</p><p>6. Practical understanding of production machinery, troubleshooting, preventive maintenance, waste reduction, and cost control.</p><p>7. Excellent English communication skills; Arabic is an added advantage.</p><p>8. Strong proficiency in MS Office and ERP/software applications.</p><p>9. Strong leadership, decision-making, analytical, and time-management skills, with the ability to work effectively under pressure.</p><p>What We Offer</p><p>• Working Hours: 7:00 AM – 4:00 PM</p><p>• Salary: 700 – 1200 KWD (depending on experience and qualifications)</p><p>• Accommodation</p><p>• Transportation</p><p>• Annual Travel Ticket</p><p>How to Apply</p><p><br></p><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Production Management</li><li>Food Safety</li><li>Planning and Supervision</li><li>Team Leadership</li><li>Process Improvement</li><li>Effective Communication</li><li>Time Management</li><li>Problem Solving</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Production Specialist is responsible for overseeing and executing all aspects of media and content production, including video, photography, and digital materials. This role ensures that all visual and multimedia content reflects the college s brand identity and supports internal and external communication goals. The Production Specialist collaborates closely with the marketing and design teams to produce engaging and high-quality media for events, social media, and institutional campaigns.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Media Production, Film, Communication, or a related field.</li><li>3-5 years of experience in media production, videography, or content creation.</li><li>Proficiency in video editing software (Adobe Premiere Pro, After Effects, Final Cut Pro, etc.).</li><li>Knowledge of photography techniques, lighting, and sound production.</li><li>Strong organizational and time management skills with attention to detail.</li><li>Ability to work collaboratively in a fast-paced, deadline-driven environment.</li><li>Creativity and technical expertise in visual storytelling.</li><li>Fluent in English (Arabic is an advantage).</li></ul><p></p></section>

<p>To provide specialized services related to the design and construction of orthodontic appliances, and to participate in prosthetics work covering both full and partial removable appliances.</p><p>Design and construct the orthodontic appliances for each case by receiving master impression from orthodontic clinic via supervisor and discusses course of action, duration of work and potential problems with supervisor. </p><p>Specialized in the technical aspect of orthodontic work according to the latest technology applied i.e. construct appliances to the specification of the orthodontist by preparing study models, fixing springs, retraction hooks and expansion screws to ensure desired effect, assembling on to a master model, waxing on to a base and processing in acrylic resin.</p><p>Construct both full and partially upper and lower denture by designing wax bite block, selecting teeth and carving them to desired shape, processing with acrylic resin and trimming and polishing. </p><p>Design and construct silver cap splints for (fractured jaws) injuries by preparing a model on an articulator to re-produce patient bites, involves positioning, locking plates and soldering the splints to the locking plates. </p><p>Carries out other related duties such as maintaining workbench equipment in a safe manner, assisting colleagues by undertaking prosthetic activities as workload demands. </p><p><strong>Desired Candidate Profile</strong></p><p>Education: Diploma in Dental Technology plus advanced diploma (or equivalent experiences) from a recognized institution.</p><p>Experience: 6 years.</p><p>Practicing license from Ministry of Health – Kuwait. </p>

Job Overview<br><br> JOB DESCRIPTION <br><br>The TCP Specialist – Wireline is responsible for planning, preparing, and executing Tubing Conveyed Perforating (TCP) operations safely and efficiently in support of customer well completion and intervention activities. This role provides advanced technical expertise in TCP systems, explosive handling, pressure control equipment, and perforating technologies while ensuring compliance with Weatherford operational procedures, HSE standards, and customer requirements.<br><br>Working closely with customers, drilling and completion teams, field operations, and engineering personnel, the TCP Specialist serves as the technical lead for TCP operations, ensuring equipment readiness, operational excellence, service quality, and successful project execution across onshore and offshore environments.<br><br>Responsibilities<br><br> Plan, coordinate, and execute Tubing Conveyed Perforating (TCP) operations in accordance with approved engineering programs, customer requirements, and Weatherford procedures. Prepare, inspect, assemble, test, and maintain TCP equipment, perforating guns, firing heads, setting tools, and associated downhole equipment. Ensure all explosive materials are handled, transported, stored, and utilized in compliance with company procedures and regulatory requirements. Conduct pre-job planning, risk assessments, Job Safety Analyses (JSAs), and operational briefings before each job. Verify equipment readiness, certification, maintenance status, and documentation prior to mobilization. Supervise rig-up, pressure testing, execution, troubleshooting, and rig-down of TCP equipment at customer well sites. Monitor operational performance and resolve technical issues during well completion and perforating operations. Coordinate activities with customer representatives, drilling contractors, rig personnel, and other service providers to ensure seamless execution. Prepare accurate operational reports, service tickets, equipment records, and post-job documentation. Investigate operational failures, perform root cause analysis, and implement corrective and preventive actions. Maintain inventory accuracy and ensure proper storage, preservation, and maintenance of TCP tools and explosive equipment. Mentor and provide technical guidance to junior Wireline Engineers, Field Specialists, and operators. Support new technology implementation, field trials, and continuous improvement initiatives. Ensure compliance with Weatherford HSE policies, customer standards, API requirements, and local regulatory requirements. Promote operational excellence, service quality, and customer satisfaction throughout all field activities. <br><br>Skills<br><br> Strong knowledge of Tubing Conveyed Perforating (TCP) systems and completion operations. Experience with perforating guns, firing heads, detonators, setting tools, and explosive systems. Knowledge of explosive safety regulations, transportation, storage, and handling procedures. Strong understanding of pressure control equipment (PCE) and well control principles. Experience with wireline and completion equipment used during TCP operations. Excellent troubleshooting and technical problem-solving skills. Strong mechanical aptitude and equipment maintenance capabilities. Knowledge of API standards, HSE requirements, and industry best practices. Effective communication and customer relationship management skills. Strong planning, organizational, and documentation skills. Ability to work independently under demanding operational conditions. Leadership and mentoring capabilities. Computer proficiency in operational reporting and Microsoft Office applications. Ability to travel and work rotational schedules in onshore and offshore environments. <br><br>Qualifications<br><br> High School Diploma, Technical Diploma, or Bachelor's degree in Mechanical Engineering, Petroleum Engineering, or a related technical discipline. Minimum 5–8 years of Wireline experience, including significant hands-on experience in Tubing Conveyed Perforating (TCP) operations. Proven experience supporting onshore and offshore well completion and perforating projects. Strong knowledge of pressure control equipment, perforating systems, and well intervention practices. Valid IWCF or IADC Well Control Certification is preferred. Valid explosives handling certification or equivalent regulatory authorization (where applicable). Offshore certifications such as BOSIET, H₂S, First Aid/CPR, and medical certification are preferred for offshore assignments. Experience working with Weatherford TCP systems and operational procedures is highly desirable. Strong commitment to safety, operational excellence, quality, and customer service. Willingness to travel internationally and work rotational field assignments as required.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Daily Odoo MRP run: </b>execute the daily MRP cycle translating stock positions and demand signals into Work Order releases.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Phased Sales WO release coordination (SL-G04): </b>manage the phased release of Work Orders in line with the, in coordination with the Sales Operations Officer.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Master Production Schedule: </b>own and maintain a 4-week rolling production schedule balancing the 8 production sections against the elevators/day target.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Material readiness coordination: </b>coordinate daily kit availability with the Group Warehouse and factory-internal Store Keepers to prevent stock-outs on the active MTS SKUs.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>MTS Kanban pull-flow management: </b>manage the 7-level Kanban system end to end (raw material → machine operating → forming → welding → coating → assembly → dispatch), maintaining Safety Stock, Reorder Point and Max Stock discipline per ABC SKU classification.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;<b>Team leadership: </b>manage and develop the Scheduling Officer, who owns the daily dispatch plan and real-time Work Order progress monitoring.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>•&nbsp;&nbsp;&nbsp;&nbsp;3+ years of production planning experience in a Make-to-Stock (MTS) manufacturing environment</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Working proficiency with Odoo or an equivalent ERP/MRP system</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Strong Excel and MRP / material-planning analytical skills</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Industrial or manufacturing sector background; elevator or MEP component manufacturing is an advantage</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;Working English required; Arabic an advantage</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication:</b></p><ul><li>Ability to communicate effectively verbally and in writing.</li><li>Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Professional Abilities and Skills:</b></p><ul><li>Familiarity with safety and quality standards.</li><li>Good knowledge of production processes and food safety.</li><li>Optimal interaction with company members and mastering work while preserving company property and its secrets.</li><li>Ability to work under pressure.</li><li>Good knowledge of mechanical systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to conduct technical analyses.</li></ul><p><b>Languages:</b></p><p>• Ability to communicate in Arabic or English, at least at a conversational level.</p><p><b>Personal Skills:</b></p><ul><li>Flexibility in work.</li><li>Responsibility and building trust with others.</li><li>Teamwork skills.</li><li>Knowledge of labor laws.</li><li>Punctuality.</li><li>Accuracy and focus.</li><li>Job competencies.</li><li>Required competency rating.</li></ul><p><br></p><p><b>Tasks and Responsibilities</b></p><ul><li>Inspect machinery and equipment according to maintenance plans established by management.</li><li>Clean machinery, equipment, and work areas and follow all instructions issued by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Conduct routine inspections and preventive maintenance of mechanical machinery and equipment.</li><li>Coordinate with the direct supervisor to ensure the availability of required spare parts.</li><li>Apply all workplace health and safety principles and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in maintenance and repair activities.</li><li>Perform maintenance and repairs on mechanical machinery and equipment according to the instructions of the direct supervisor.</li><li>Assist with the installation and commissioning of new mechanical equipment.</li><li>Prepare technical reports on the condition and performance of mechanical equipment.</li><li>Train and guide junior workers on basic mechanical maintenance activities.</li><li>Participate in developing and improving preventive maintenance plans for mechanical equipment.</li><li>Maintain professional ethics and prioritize the company's interests in all activities.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p><b>Required Skills &amp; Competencies</b></p><ul><li>Good knowledge of mechanical equipment systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to perform basic technical analysis and identify mechanical issues.</li><li>Good understanding of production processes and food safety requirements.</li><li>Knowledge of workplace safety and quality standards.</li><li>Ability to work effectively under pressure.</li><li>Strong attention to detail and accuracy.</li><li>Good teamwork and communication skills.</li><li>Flexible and responsible approach to work.</li><li>Punctual, reliable, and accountable.</li><li>Ability to maintain company property and confidentiality.</li><li>Good interpersonal and professional skills.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Qualifications:</b></p><ul><li>Technical Diploma in Mechanics or equivalent.</li><li>High School Diploma with practical experience.</li></ul><p><b>Experience:</b></p><ul><li>Fresh Graduate.</li><li>3 years experience.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for inspecting, maintaining, troubleshooting, and repairing mechanical equipment and machinery to ensure safe, reliable, and efficient operation. The role supports preventive maintenance activities, equipment installation, technical analysis, spare parts coordination, and compliance with safety and quality standards.</p><p>Key Responsibilities</p><ul><li>Inspect machinery and equipment according to maintenance plans established by management.</li><li>Clean machinery, equipment, and work areas and follow all instructions issued by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Conduct routine inspections and preventive maintenance of mechanical machinery and equipment.</li><li>Coordinate with the direct supervisor to ensure the availability of required spare parts.</li><li>Apply all workplace health and safety principles and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in maintenance and repair activities.</li><li>Perform maintenance and repairs on mechanical machinery and equipment according to the instructions of the direct supervisor.</li><li>Assist with the installation and commissioning of new mechanical equipment.</li><li>Prepare technical reports on the condition and performance of mechanical equipment.</li><li>Train and guide junior workers on basic mechanical maintenance activities.</li><li>Participate in developing and improving preventive maintenance plans for mechanical equipment.</li><li>Maintain professional ethics and prioritize the company's interests in all activities.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Good knowledge of mechanical equipment systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to perform basic technical analysis and identify mechanical issues.</li><li>Good understanding of production processes and food safety requirements.</li><li>Knowledge of workplace safety and quality standards.</li><li>Ability to work effectively under pressure.</li><li>Strong attention to detail and accuracy.</li><li>Good teamwork and communication skills.</li><li>Flexible and responsible approach to work.</li><li>Punctual, reliable, and accountable.</li><li>Ability to maintain company property and confidentiality.</li><li>Good interpersonal and professional skills.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Qualifications:</b></p><ul><li>Technical Diploma in Mechanics or equivalent.</li><li>High School Diploma with practical experience.</li></ul><p><b>Experience:</b></p><ul><li>Fresh Graduate.</li><li>3 years experience.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Al Jazeera Real Estate Development Co. K.S.C.C (AJRE) founded in 2002, is a closed shareholding Company has an impressive 22-years of track record providing high-quality developments such as Sahara Kuwait Golf Resort, Murouj Mall &amp; Sahara Equestrian Resort.</p><br><p>AJRE continues to develop its business by expanding into related business lines and offering new products and services. AJRE is committed to the pursuit of excellence and will continue evaluating ways to strengthen policies and practices to promote the interests of shareholders, partners, and employees.</p><br><br>Job Description<br><p>Sahara Arena is seeking a Technical Assistant to support the Operations Manager in the daily technical operation and maintenance of the venue. The successful candidate will help ensure the arena is safe, event-ready, and operating efficiently by coordinating maintenance activities, reviewing technical event requirements, and providing technical support before, during, and after events – to a standard consistent with comparable local and regional arenas.</p><br><br>Qualifications<br><ul><li>Diploma or Bachelor’s degree in Engineering (Mechanical, Electrical, or related) or a related technical field.</li><li>2+ years’ experience in arenas, theatres, exhibition halls, stadiums, or live event production preferred.</li><li>Strong working knowledge of entertainment rigging, trusses, chain hoists/motors (including large-capacity grids), AV systems, professional sound and lighting, LED screens, and electrical power distribution/generators.</li><li>Ability to read and interpret technical drawings, rigging plans, load calculations, and event layouts.</li><li>Recognized rigging/safety certification (e.g., ETCP Rigger, IRATA, or equivalent), or willingness to obtain one, is an advantage.</li><li>Familiarity with CMMS or maintenance-tracking software for PPM and asset management.</li><li>Proficiency in Microsoft Office; AutoCAD or Vectorworks knowledge is a strong advantage.</li><li>Strong communication, organizational, and problem-solving skills, with the ability to stay calm under the time pressure of live event load-in/load-out.</li><li>Willingness to work flexible hours – including evenings, weekends, and public holidays – based on event schedules, and to provide on-call standby coverage during live shows.</li></ul><br>Additional Information<br><p><strong>Venue Operations &amp; Preventive Maintenance</strong></p><br><ul><li>Assist in the daily technical operation of the arena, including mechanical, electrical, fire/life-safety, rigging and AV systems.</li><li>Perform routine inspections and Preventive Planned Maintenance (PPM), logging all activity in the venue’s CMMS or maintenance-tracking system.</li><li>Coordinate maintenance team and supervise contractors and specialist vendors, verifying completed work meets venue and manufacturer standards.</li><li>Maintain accurate maintenance records, asset registers, and technical documentation (as-built drawings, rigging certificates, equipment manuals).</li><li>Ensure all building systems and event infrastructure – including the rigging grid up to its full rated capacity, power distribution, HVAC, and LED/AV systems – operate safely and efficiently.</li></ul><p><strong>Event Technical Support</strong></p><br><ul><li>Attend technical meetings and advance calls with event organizers, touring production teams, and contractors.</li><li>Review and validate incoming technical riders, stage plots, and rigging plans against venue capacities before approving load-ins.</li><li>Provide hands-on technical support during event setup, rehearsals, live events, and dismantling, including standby coverage for live shows.</li></ul><p><strong>Pre- &amp; Post-Event Responsibilities</strong></p><br><ul><li>Before each event: review technical submissions, verify rigging and roof/grid loads against certified limits, inspect hoists, trusses, chain motors, power distribution boards/generators and AV systems, and confirm the arena is fully event-ready.</li><li>After each event: inspect the venue and equipment for damage or faults, document maintenance requirements, coordinate necessary repairs with contractors, and ensure the arena is restored and ready for the next event.</li></ul><p><strong>Health, Safety &amp; Compliance</strong></p><br><ul><li>Support compliance with Kuwait Civil Defence, fire/life-safety, and recognized international rigging and entertainment-industry safety standards.</li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Scope:</b></p><ul><li>Design, implement, and optimize secure CI/CD pipelines.</li><li>Integrate automated security checks into build and deployment workflows.</li><li>Ensure pipelines are scalable, efficient, and aligned with best practices.</li><li>Support multi-environment deployments (dev, staging, production).</li><li>Design and manage OpenShift platform.</li><li>Administer containerization and orchestration platforms.</li><li>Maintain high availability, performance, and scalability of systems.</li><li>Embed security controls throughout the SDLC.</li><li>Implement and manage:</li><li><b>SAST (Static Application Security Testing)</b></li><li><b>DAST (Dynamic Application Security Testing)</b></li><li><b>Software Composition Analysis (SCA)</b></li><li><b>MAST (Mobile Application Security Testing)</b></li><li><b>Container and infrastructure security scanning</b></li><li>Evaluate, implement, and maintain DevSecOps toolchains.</li><li>Automate security testing and compliance reporting.</li><li>Integrate tools into CI/CD pipelines and developer workflows.</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Qualifications</b></p><ul><li>Proven experience in DevOps/DevSecOps roles.</li><li>Strong expertise in CI/CD tools (e.g., Jenkins, GitLab CI/CD, BitBucket, Tekton).</li><li>Hands-on experience with OpenShift platform.</li><li>Experience with containerization (Docker) and orchestration (OpenShift).</li><li>Solid understanding of security tools:</li><li>SAST (e.g., SonarQube, Checkmarx)</li><li>DAST</li><li>SCA</li><li>MAST</li><li>PrismaCloud</li><li>HashiCorp.</li><li>Experience with Infrastructure as Code (Terraform, Ansible, etc.).</li><li>Knowledge of security best practices, frameworks, and compliance standards.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts. Responsibilities + Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. + Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. + Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. + Ensure all work areas and equipment are kept clean, orderly and in a safe manner. + Performs quality and safety self-inspections. + Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). + Perform other duties as assigned in accordance with contractual, functional, and mission requirements. Qualifications Minimum Qualifications Education/Certifications: + Prior military service of AFSC 3E072, Power Production Journeyman + Must be MAAS/BAK-12 Factory Trained &amp; Certified + High school diploma or equivalent. + Must be a U.S. Citizen with a current, valid U. S. Passport and Driver’s License (able to drive manual transmission). + Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment. + Must have the capability of obtaining an Air Force flight line driver’s license. + Must be able to pass a flight line access test and obtain flight line access badge. + Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc. + Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear. Experience: + Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12. + Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization. + Must have three years of experience operating and maintaining prime power spot generators and backup generators. Skills: + Must be capable of giving and receiving instructions. + Must be fluent reading and speaking English. + Able and willing to work periods of long hours to meet mission requirements. + Military experience in a contingency environment and knowledge and experience working with government contracts preferred. Other Requirements: + Work will be outdoors and indoors. Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication:</b></p><ul><li> Effective verbal and written communication skills.</li><li>Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Key Abilities and Skills:</b></p><ul><li>Knowledge of electricity and electronics.</li><li>Ability to assist with the repair and maintenance of electrical equipment.</li><li>Ability to read and interpret basic electrical drawings and schematics.</li><li>Ability to use electrical tools, equipment, and instruments safely.</li><li>Familiarity with the nature of work and the equipment and tools used in the company.</li><li>Manual skills.</li><li>Proficiency in work, and speed in performing assigned tasks.</li><li>Strong physical skills to stand for long hours during work.</li><li>Good skills in using tools and equipment.</li><li>Ability to work in a noisy and busy environment.</li><li>Adherence to all safety precautions.</li><li>Attention to detail and accuracy.</li><li>Knowledge of safety and quality requirements.</li><li>Ability to work effectively under pressure.</li><li>Good teamwork and communication skills.</li><li>Commitment to safety procedures and company policies.</li><li>Ability to maintain company property and confidentiality.</li></ul><p><b>Languages:</b></p><p>• Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</p><p><b>Responsibilities and Duties</b></p><p>• Assist in all work related to electrical installations that occur on machinery and production lines.</p><ul><li>Assist in monitoring the performance and condition of electrical equipment and machinery in the production department and report any potential faults or improper use of this machinery to the direct supervisor.</li><li>Follow all instructions and work procedures provided by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Perform routine inspections and assist with preventive maintenance of electrical equipment and machinery.</li><li>Coordinate with relevant departments to ensure the availability of required spare parts and materials.</li><li>Apply all workplace health and safety rules and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in electrical maintenance and repair work.</li><li>Assist in maintaining and repairing control and operating systems, including control panels, measuring instruments, and control devices.</li><li>Assist in maintaining and repairing electrical distribution systems, including transformers and electrical switches.</li><li>Assist with the installation, testing, and commissioning of new electrical equipment.</li><li>Prepare technical reports related to maintenance and repair activities.</li><li>Maintain professional ethics and prioritize the company's interests.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p><b>Required Skills &amp; Competencies</b></p><ul><li>Basic knowledge of electrical and electronic systems.</li><li>Ability to assist with the repair and maintenance of electrical equipment.</li><li>Ability to read and understand basic electrical drawings and schematics.</li><li>Ability to use electrical tools, equipment, and instruments safely.</li><li>Good understanding of the company's electrical equipment and machinery.</li><li>Good manual and practical skills.</li><li>Ability to perform assigned tasks efficiently and accurately.</li><li>Ability to stand for extended periods and work in noisy environments.</li><li>Strong attention to detail and accuracy.</li><li>Knowledge of workplace safety and quality requirements.</li><li>Ability to work effectively under pressure.</li><li>Good teamwork and communication skills.</li><li>Commitment to safety procedures and company policies.</li><li>Ability to maintain company property and confidentiality.</li></ul><p><b>Language Requirements:</b></p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Educational Qualifications:</b></p><ul><li>Technical Diploma in <b>Electrical Engineering or Electrical Maintenance</b>.</li><li><b>High School Diploma</b>.</li></ul><p><b>Experience:</b></p><ul><li><b>Fresh Graduate</b>.</li><li><b>3 years of experience</b>.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for assisting the electrical maintenance team with the inspection, installation, maintenance, and repair of electrical equipment, machinery, production lines, control systems, and electrical distribution systems. The role supports preventive maintenance activities and ensures compliance with safety and quality standards.</p><p>Key Responsibilities</p><ul><li>Assist with electrical wiring and installation work on machinery and production lines.</li><li>Assist in monitoring the performance and condition of electrical equipment and machinery in the production department.</li><li>Report any potential faults, equipment malfunctions, or improper use of machinery to the direct supervisor.</li><li>Follow all instructions and work procedures provided by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Perform routine inspections and assist with preventive maintenance of electrical equipment and machinery.</li><li>Coordinate with relevant departments to ensure the availability of required spare parts and materials.</li><li>Apply all workplace health and safety rules and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in electrical maintenance and repair work.</li><li>Assist in maintaining and repairing control and operating systems, including control panels, measuring instruments, and control devices.</li><li>Assist in maintaining and repairing electrical distribution systems, including transformers and electrical switches.</li><li>Assist with the installation, testing, and commissioning of new electrical equipment.</li><li>Prepare technical reports related to maintenance and repair activities.</li><li>Maintain professional ethics and prioritize the company's interests.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Basic knowledge of electrical and electronic systems.</li><li>Ability to assist with the repair and maintenance of electrical equipment.</li><li>Ability to read and understand basic electrical drawings and schematics.</li><li>Ability to use electrical tools, equipment, and instruments safely.</li><li>Good understanding of the company's electrical equipment and machinery.</li><li>Good manual and practical skills.</li><li>Ability to perform assigned tasks efficiently and accurately.</li><li>Ability to stand for extended periods and work in noisy environments.</li><li>Strong attention to detail and accuracy.</li><li>Knowledge of workplace safety and quality requirements.</li><li>Ability to work effectively under pressure.</li><li>Good teamwork and communication skills.</li><li>Commitment to safety procedures and company policies.</li><li>Ability to maintain company property and confidentiality.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Educational Qualifications:</b></p><ul><li>Technical Diploma in <b>Electrical Engineering or Electrical Maintenance</b>.</li><li><b>High School Diploma</b>.</li></ul><p><b>Experience:</b></p><ul><li><b>Fresh Graduate</b>.</li><li><b>3 years of experience</b>.</li></ul><p><br></p></div>

<p><br></p><p>Reports to the TLSF Manager. Responsible for the full spectrum of maintenance operations; oversee Go/No-Go Testing of all government furnished equipment retrograded from the forward deployed sites for redistribution. Manages refurbishment programs for deep cleaning, upgrade, repair and configuration of IGX and other electronic systems. Directs and supervises Maintenance Support Teams (MST) supporting communication towers, telephony switching systems, and other communication systems. Manage field and sustainment maintenance to all strategic communications systems under the command of the 160th Signal Brigade, its subordinate units and the RCC. Monitors production for compliance with scheduling directives, cost factors, and standards. Develops performance standards, conducts employee counseling, and makes suggestions for formal and informal performance appraisals. Manages the calibration of Government Furnished Property (GFP) test equipment assigned to the Program. Directs, controls, and supervises antenna and tower maintenance in their respective countries, or areas they may be deployed too. Plans and coordinates scheduled maintenance visits for antenna/towers as required. Responsible for providing trip reports to the TLSF Manager as work is performed and completed. Performs a variety of duties pertaining to the operation, maintenance and repair of antennas and associated mounting hardware, tower systems, waveguide, lighting equipment and grounding systems. Will be responsible for accountability of Government Furnished Property (GFP) in their possession or under their control.</p><p>Program: OMDAC-SWACA</p><p>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p>Responsibilities</p><p>Provides guidance and mentoring to personnel assigned to the section. Processes Purchase Requests required to support daily maintenance operations. Reviews receipt, control and processing of work orders. Collects and analyzes data necessary to manage resources. Monitors material stock level to support maintenance activities. Advises the Program Management of the status of work orders and scheduling of maintenance schedule. May be required to prepare and present briefs on maintenance-related activities. Maintains situational awareness of logistics and maintenance activities at all operational sites, including the status of any operational, maintenance, and resource issues, including the glide path for the resolution of any of these issues. Manage and monitor the Test, Measurement and Diagnostic Equipment (TMDE) Repair and Calibration program. Ensures obligations are being fulfilled as per the Performance Work Statement (PWS). Monitors staffing levels and creates projections to ensure proper manning is maintained in all situations; to include adequate coverage during vacation/holiday periods and for replacement of personnel who are projected to depart. Provides direct communication and coordination with associated military counterparts (such as Brigade S-4 and S-3) to facilitate mission support. Establishes rapport and effectively maintains liaison and coordination between the working elements of the department, management, customers and staff. Help develop best/alternative solutions to maintain smooth operations. Will work with and in conjunction with other departmental sections to accomplish all required taskings. Supervises and directs the Antenna Maintenance Support Team (AMST) in the performance of on-site and off-site routine and emergency maintenance support on towers, antennas, transmission lines and associated equipment. Perform quality assurance/quality control inspections on work performed. Performs organizational level repair maintenance through off-site general Support maintenance of support equipment including disassembly, testing, fault isolation and piece part replacement. Also performs technical inspections to determine maintenance requirements and approximate repair costs. Coordinates with sites and Operations and Maintenance staff in scheduled/unscheduled maintenance to ensure maximum system availability is maintained. Conducts, attends, and prepares for meetings and briefings as required. Performs other duties and assignments assigned.</p><p><b>Qualifications</b></p><p>Security Clearance: Ability to obtain a National Agency Check with Inquires (NACI) in order to obtain a Common Access Card (CAC). Ability to obtain and maintain a Secret level security clearance is preferred.</p><p>Education / Certifications:</p><p>One-year related experience may be substituted for one year of education if a degree is required. High School diploma or GED required. Cardiopulmonary Resuscitation (CPR) Training &amp; Certification ( Provided by the contract. ) Tower training: Tower Safety &amp; Rescue; Height &amp; Harness Safety Course or equivalent Requires a training certificate which meets one of the following requirements: OSHA 1910 ( Fall Protection Requirements ) OSHA 1926 ( Fall Protection Requirements ) ANSI/ASSE Z359</p><p>Experience:</p><p>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. Experience with a customer service-oriented company. 3-5 years of supervisory preferred. Must have knowledge and comply with OSHA 29 CFR Standard 1PHONE_NUMBER for all tower and antenna work. Must have the ability to comprehend and interpret complex technical data. Must have familiarity with logistical, maintenance, and purchasing operations. Must be familiar with maintenance operations, transportation, logistical, supply and services, military operations. Experience with a customer service-oriented company.</p><p>Skills &amp; Technology Used:</p><p>Proficiency in using a computer - desktop or laptop. Proficiency in using Microsoft productivity software. Proficiency in using Email client software. Other software / work management tools as directed Harness and fall protection equipment</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Ability to obtain a National Agency Check with Inquires (NACI) in order to obtain a Common Access Card (CAC).</li><li>Ability to obtain and maintain a Secret level security clearance is preferred.</li><li>High School diploma or GED required.</li><li>Cardiopulmonary Resuscitation (CPR) Training &amp; Certification ( Provided by the contract. )</li><li>Tower training: Tower Safety &amp; Rescue; Height &amp; Harness Safety Course or equivalent</li><li>Requires a training certificate which meets one of the following requirements: OSHA 1910 ( Fall Protection Requirements ) OSHA 1926 ( Fall Protection Requirements ) ANSI/ASSE Z359</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience.</li><li>Experience with a customer service-oriented company.</li><li>3-5 years of supervisory preferred.</li><li>Must have knowledge and comply with OSHA 29 CFR Standard 1PHONE_NUMBER for all tower and antenna work.</li><li>Must have the ability to comprehend and interpret complex technical data.</li><li>Must have familiarity with logistical, maintenance, and purchasing operations.</li><li>Must be familiar with maintenance operations, transportation, logistical, supply and services, military operations.</li><li>Proficiency in using a computer - desktop or laptop.</li><li>Proficiency in using Microsoft productivity software.</li><li>Proficiency in using Email client software.</li><li>Other software / work management tools as directed</li><li>Harness and fall protection equipment</li><li>Must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</li></ul>

<p>URGENT OVERSEAS JOB OPPORTUNITIES KUWAIT AMOZA Overseas Recruitment brings you exciting career opportunities with SALEM M. Al-Nisf, Kuwait , for experienced professionals in Transformer &amp; Switch Gear Divisions .</p><p>TRANSFORMER DIVISION</p><p>SWITCH GEAR DIVISION</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have Transformer Experience</li><li>Relevant Transformer / Switch Gear experience is mandatory for the respective positions.</li></ul>

<p>Urgent Hiring We are looking for experienced candidates for the following positions.</p><p><strong>Desired Candidate Profile</strong></p><p>Relevant experience in AV systems and technical support</p>

<p>Install, test, commission, and troubleshoot BMS systems, including controllers, sensors, HVAC controls, and field devices. Read electrical drawings, perform loop checks, maintain systems, and ensure safe, timely project execution.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Candidate profile</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Reports to the TLSF Manager. Responsible for the full spectrum of maintenance operations; oversee Go/No-Go Testing of all government furnished equipment retrograded from the forward deployed sites for redistribution. Manages refurbishment programs for deep cleaning, upgrade, repair and configuration of IGX and other electronic systems. Directs and supervises Maintenance Support Teams (MST) supporting communication towers, telephony switching systems, and other communication systems. Manage field and sustainment maintenance to all strategic communications systems under the command of the 160th Signal Brigade, its subordinate units and the RCC. Monitors production for compliance with scheduling directives, cost factors, and standards. Develops performance standards, conducts employee counseling, and makes suggestions for formal and informal performance appraisals. Manages the calibration of Government Furnished Property (GFP) test equipment assigned to the Program. Directs, controls, and supervises antenna and tower maintenance in their respective countries, or areas they may be deployed too. Plans and coordinates scheduled maintenance visits for antenna/towers as required. Responsible for providing trip reports to the TLSF Manager as work is performed and completed. Performs a variety of duties pertaining to the operation, maintenance and repair of antennas and associated mounting hardware, tower systems, waveguide, lighting equipment and grounding systems. Will be responsible for accountability of Government Furnished Property (GFP) in their possession or under their control. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Provides guidance and mentoring to personnel assigned to the section. + Processes Purchase Requests required to support daily maintenance operations. + Reviews receipt, control and processing of work orders. Collects and analyzes data necessary to manage resources. Monitors material stock level to support maintenance activities. + Advises the Program Management of the status of work orders and scheduling of maintenance schedule. May be required to prepare and present briefs on maintenance-related activities. + Maintains situational awareness of logistics and maintenance activities at all operational sites, including the status of any operational, maintenance, and resource issues, including the glide path for the resolution of any of these issues. + Manage and monitor the Test, Measurement and Diagnostic Equipment (TMDE) Repair and Calibration program. + Ensures obligations are being fulfilled as per the Performance Work Statement (PWS). + Monitors staffing levels and creates projections to ensure proper manning is maintained in all situations; to include adequate coverage during vacation/holiday periods and for replacement of personnel who are projected to depart. + Provides direct communication and coordination with associated military counterparts (such as Brigade S-4 and S-3) to facilitate mission support. + Establishes rapport and effectively maintains liaison and coordination between the working elements of the department, management, customers and staff. + Help develop best/alternative solutions to maintain smooth operations. Will work with and in conjunction with other departmental sections to accomplish all required taskings. + Supervises and directs the Antenna Maintenance Support Team (AMST) in the performance of on-site and off-site routine and emergency maintenance support on towers, antennas, transmission lines and associated equipment. Perform quality assurance/quality control inspections on work performed. + Performs organizational level repair maintenance through off-site general Support maintenance of support equipment including disassembly, testing, fault isolation and piece part replacement. Also performs technical inspections to determine maintenance requirements and approximate repair costs. + Coordinates with sites and Operations and Maintenance staff in scheduled/unscheduled maintenance to ensure maximum system availability is maintained. + Conducts, attends, and prepares for meetings and briefings as required. + Performs other duties and assignments assigned. Qualifications + Qualifications + Security Clearance: + Ability to obtain a National Agency Check with Inquires (NACI) in order to obtain a Common Access Card (CAC). + Ability to obtain and maintain a Secret level security clearance is preferred. + Education / Certifications: One-year related experience may be substituted for one year of education if a degree is required. + High School diploma or GED required. + Cardiopulmonary Resuscitation (CPR) Training &amp; Certification (Provided by the contract.) + Tower training: Tower Safety &amp; Rescue; Height &amp; Harness Safety Course or equivalent + Requires a training certificate which meets one of the following requirements: + OSHA 1910 (Fall Protection Requirements) + OSHA 1926 (Fall Protection Requirements) + ANSI/ASSE Z359 + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + Experience with a customer service-oriented company. + 3-5 years of supervisory preferred. Must have knowledge and comply with OSHA 29 CFR Standard 1910.268 for all tower and antenna work. Must have the ability to comprehend and interpret complex technical data. Must have familiarity with logistical, maintenance, and purchasing operations. + Must be familiar with maintenance operations, transportation, logistical, supply and services, military operations. + Experience with a customer service-oriented company. + Skills &amp; Technology Used: + Proficiency in using a computer - desktop or laptop. + Proficiency in using Microsoft productivity software. + Proficiency in using Email client software. + Other software / work management tools as directed + Harness and fall protection equipment + Supervisory / Budgetary Responsibilities + Direct and supervises employees assigned to Maintenance Support Team (MST) + Process Purchase Requests to support daily maintenance missions + Update proprietary applications regarding: + Update section employee daily status, leave, sick, on site, etc. + Verify and track accomplishment of section monthly or quarterly safety and compliance training + Purge section employee expired certifications + Verify section employee compliance training in Virtual Training Record + Verify section vehicle logs are being kept accurately and uploaded + Review weekly training compliance reports for accomplishment prior to suspense. + Review and approve leave forms ensuring before approval all compliance training is current. + Coordinate transportation and integration of new and returning employees. + Document and promptly counsel poor performance and policy violations. + Enforce all V2X, GO 1, and dress code policies. + Provide annual employee appraisal feedback in a professional and constructive manner. + Demonstrate V2X values Integrity, Respect, Responsibility, and Professionalism. + Ensure the safety of personnel and monthly safety inspections are properly conducted. + Communicate effectively up and down the chain of command. + Manage work schedules. + Conduct proper new and returning employee orientation and ensure employee thorough understanding and can accomplish all tasks in the Employee Job Certification (EJC) + Work with employees and HR when emergencies or abnormal circumstances occur. + To the best of your ability, render all decisions based upon our company values and principles of Integrity, Respect, Responsibility, and Professionalism. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The job role is to handle the customers and give solutions and troubleshoot the problems. should have at least 2 years knowledge in the field. Should have idea about chip level services.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Chip level service </li><li>Pc repair </li><li>Software installations </li><li>trouble shooting</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Install, test, commission &amp; troubleshoot BMS. Perform panel installation, wiring, termination, loop checking, point-to-point &amp; functional testing. Read electrical/control drawings and rectify faults in HVAC, lighting &amp; BMS systems.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Apply Now: Email: EMAIL_ADDRESS Call/WhatsApp: PHONE_NUMBER</p><p></p></section>

<ul><li>Install, repair, and maintain piping systems for various applications including water, gas, and steam.</li><li>Read and interpret blueprints and technical drawings to determine the layout of piping systems.</li><li>Measure and cut piping materials to precise specifications using specialized tools and equipment.</li><li>Ensure all installations comply with local codes and regulations, maintaining a high standard of safety.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; vocational training in plumbing or pipe fitting is preferred.</li><li>Minimum of 3 years of proven experience in pipe fitting, preferably in industrial or commercial settings.</li><li>Relevant certifications, such as a Pipefitter Certification or Journeyman License, are highly desirable.</li><li>Experience with various pipe materials, including PVC, copper, and steel, showcasing versatility.</li></ul>