mechanical technician

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>A Drinking Water Production &amp; Bottling Factory is looking for an experienced Mechanical Technician / Machine Operator.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements:</p><p>* Experience in machine operation and maintenance.</p><p>* Ability to troubleshoot and repair mechanical faults.</p><p>* Good English communication skills.</p><p>* Factory or production line experience is preferred.</p><p>* Preference for candidates from the Philippines, Indonesia, or Sri Lanka.</p><p><br></p><p><br></p></div>

<p><strong>Job Summary:</strong> Maintenance Technician - Utility is responsible for the operation, maintenance, and troubleshooting of utility systems, including ammonia Cooling Plant, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role ensures equipment efficiency, reliability, and compliance with safety and environmental regulations.</p><p><strong>Job duties include but are not limited to:</strong></p><ul><li>Perform preventive and corrective maintenance on ammonia cooling plants, boilers, pumps, air compressors, PHE HVAC systems, chillers, cooling towers, and water treatment plants to ensure continuous operation.</li><li>Diagnose and troubleshoot mechanical, and hydraulic issues in utility equipment.</li><li>Conduct inspections and ensure compliance with health, safety, and environmental standards.</li><li>Record and report maintenance activities, breakdowns, and spare part usage.</li><li>Assist in the installation and commissioning of new utility equipment.</li><li>Monitor energy consumption and recommend efficiency improvements.</li><li>Follow standard operating procedures (SOPs) and adhere to safety protocols.</li><li>Collaborate with the production and engineering teams to minimize downtime.</li><li>Maintain an inventory of tools, spare parts, and consumables required for maintenance tasks.</li><li>Respond promptly to emergency breakdowns and provide technical support.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma or technical certification in Mechanical, Electrical or Industrial Maintenance.</li><li>Minimum 3-5 years of experience in utility maintenance within a manufacturing or industrial setting.</li><li>Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants.</li><li>Experience with preventive maintenance programs and CMMS (Computerized Maintenance Management Systems).</li><li>Familiarity with industrial safety standards and regulatory compliance.</li><li>Ability to read and interpret technical drawings and manuals.</li><li>Hands-on experience with troubleshooting and repair of electrical and mechanical components.</li><li>Strong problem-solving and analytical skills.</li><li>Ability to work independently and as part of a team.</li><li>Excellent communication and documentation skills.</li><li>Attention to detail and a proactive approach to maintenance.</li><li>Willingness to work in shifts and respond to emergency calls.</li><li>Ability to lift heavy equipment and work in confined spaces.</li><li>Comfortable working in high-temperature and noisy environments.</li><li>Standing, climbing, and bending as required during maintenance tasks.</li><li>Industrial/manufacturing setting with exposure to mechanical and electrical equipment.</li><li>Requires adherence to safety protocols and use of PPE (Personal Protective Equipment).</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>C-17 Mechanical Aircraft Technician</p><br><br><br><p><b>Company:</b></p><br><br>Boeing Operations International Incorporated Kuwait<br><br><p>The Boeing Company is currently seeking a<b> C-17 Aircraft Mechanic</b> to support Boeing Global Services in <b>Al Mubarak Air Base Kuwait</b>.</p><br><br><br><p>This position is part of the on-site C-17 Globemaster III Integrated Sustainment Program maintenance team supporting the Kuwait Air Force (KAF) C-17 aircraft based at Al Mubarak Air Base Kuwait. Applicant will participate in organizational level maintenance activities (e.g. flight line tasks including aircraft servicing, inspections, fault diagnosis and component replacement, and structural repair) associated with day-to-day operations of C-17 Globemaster III aircraft to meet KAF mission requirements.</p><br><br><br><p>Additionally, participation in Intermediate level maintenance activities (e.g. back-shop tasks including component repair, test set operation, battery charging, and scheduled periodic inspections) will be required.</p><br><br><br><p><b>Position Responsibilities:</b></p><br><br><ul><li><p>English is the primary language of the KAF community on the airbase in Kuwait. All technical data to perform the tasks and training are in English.</p><br><br></li><li><p>Competency in reading, comprehension and speaking the English language is necessary.</p><br><br></li><li><p>Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.</p><br><br></li><li><p>Oversees assembly, disassembly or overhaul.</p><br><br></li><li><p>Configures aerospace vehicles and bench test equipment.</p><br><br></li><li><p>Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.</p><br><br></li><li><p>Performs validation/verification testing of systems and components.</p><br><br></li><li><p>Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).</p><br><br></li><li><p>Inspects components and verifies repairs for flight worthiness requirements.</p><br><br></li><li><p>Oversees training.</p><br><br></li><li><p>Works under general direction.</p><br><br></li></ul><br><p><b>This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. secret clearance Post Start is required.</b></p><br><br><br><p><b>Basic Qualifications (Required Skills/Experience):</b></p><br><br><ul><li><p>5+ years of C17 Maintenance experience</p><br><br></li><li><p>Current (or ability to obtain) US Security Clearance</p><br><br></li></ul><br><p><b>Preferred Qualifications (Desired Skills/Experience):</b></p><br><br><ul><li><p>Experience in structural, composite repair, and/or fuel cell maintenance</p><br><br></li></ul><br><p><span>This position offers relocation based on candidate eligibility.</span></p><br><br><br><p>Employer <span>is</span> willing to sponsor applicants for employment visa status</p><br><br><br><p>This requisition is for an international, locally hired position in Kuwait. Benefits and pay are determined at the local level and are not part of Boeing U.S. based payroll and will be commensurate with experience and qualifications and in accordance with applicable Kuwaiti law. Employment is subject to the candidate's ability to satisfy all Kuwaiti labor and immigration formalities.</p><br><br><br><br><p><b><b><b>Language Requirements:</b></b></b></p><br><br><br>Not Applicable<br><br><p><b>Education:</b></p><br><br>Not Applicable<br><br><p><b>Relocation:</b></p><br><br>This position offers relocation based on candidate eligibility.<br><br><p><b>Security Clearance:</b></p><br><br>This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.<br><br><p><b>Visa Sponsorship:</b></p><br><br>Employer willing to sponsor applicants for employment visa status.<br><br><p><b>Contingent Upon Award Program</b></p><br><br>This position is not contingent upon program award<br><br><p><b>Shift:</b></p><br><br>Shift Worker (Kuwait)<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Key responsibilities</p><p>Design, review, and oversee mechanical systems including pumps, pipelines, valves, blowers, and filtration unitsSupervise installation and commissioning of mechanical equipment at water treatment plantsDevelop and implement preventive maintenance programs for mechanical assetsPrepare technical reports, method statements, and as-built documentationCoordinate with civil, electrical, and process engineers to ensure integrated project deliveryIdentify and resolve mechanical failures and technical issues during project executionEnsure compliance with health, safety, and environmental regulations on-site</p><p><br></p><p>Qualifications</p><p>Bachelor's degree in Mechanical Engineering or related fieldMinimum 5 years of experience in water/wastewater projectsProficiency in AutoCAD and mechanical design softwareFamiliarity with international standards (ASME, BS, ISO)Strong problem-solving and communication skills</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Preferred skills</p><p>Experience with desalination or reverse osmosis systemsKnowledge of SCADA and process control integrationGCC project experienceProfessional engineering certification (PE or equivalent)Bilingual (Arabic/English) is an advantage</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>5+ years of C17 Maintenance experience</p><p>Current (or ability to obtain) US Security Clearance</p><p>Experience in structural, composite repair, and/or fuel cell maintenance</p><p></p></section>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><p>An Associate s degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field. Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards. I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years. Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems. Must have an Active Secret US Government Clearance. US Citizenship is required to obtain a Secret Clearance.</p>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>An Associate's degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E.</li><li>OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li><li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li><li>I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li><li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li><li>Must have an Active Secret US Government Clearance.</li><li>US Citizenship is required to obtain a Secret Clearance.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Summary:</strong> The Lead TFA, having completed level III competencies, will contribute to the management of site activities including planning, organizing, integrating, and monitoring of resources such as labor, tools and technical assistants as required to complete the work scope according to contractual requirements. Will work within defined parameters to make decisions, apply concepts to issues of great complexity, and resolve issues through immediate action or short-term planning at customer power generating facilities.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Manage, perform, coordinate the management of site activities</li><li>Perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation</li><li>Respond to requests for emergency repairs and services to troublesome equipment</li><li>Provide technical instruction and assistance to customer representatives regarding installation, operation, calibration, repair, and maintenance at customer's sites</li><li>Perform administrative functions such as: writing technical reports, ordering materials, securing quotations, preparing job status reports, reports to customers, time sheet and expense sheets on a complete timely, and thorough basis</li><li>Signs off on all changes</li><li>Drive customer satisfaction through commitment to</li><li>Maintain strong safety mindset to assure the executed work reflects the technical requirements within GE safety standards</li><li>Knowledge to troubleshoot and provide routine maintenance checkout for wide range of equipment vintage</li><li>Coach, mentor, and train other team members as required, to impart and perpetuate field engineering and/or product</li><li>Prepare timely and accurate technical reports for customer records and a reference for future outages</li><li>Ensure all parts needed for the job are shipped to the site</li><li>Perform walk-downs during installation to ensure that the customer’s contractors are working</li><li>Perform aftermarket upgrades that need to be performed at the site</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Extensive travel to and from projects and various field assignments will be required</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization’s core values.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Extensive experience in a field services or power generation equipment maintenance position</li><li>Successful completion of required level III training programs is a minimum requirement</li><li>Strong technical competence in reading and interpreting electrical/mechanical flow and instrument diagrams dial and laser alignment and thermal growth equipment</li><li>Extensive travel to and from projects and various field assignments will be required</li><li>English proficiency required</li><li><strong>Desired Characteristics:</strong></li><li>Experience and training on Alstom, Siemens, or other OEM equipment</li><li>Strong organizational and project management skills</li><li>Strong oral and written interpersonal, communication, and leadership skills</li><li>Strong business acumen and ability to sell GE products to the customer</li></ul><p></p></section>

<p><h4>Job description</h4> <p>The aircraft mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM medical for deployment.</p> <h4>Knowledge & skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements / working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and be responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <p>This role requires the candidate to obtain Disclosure and Barring Service (DBS) check through UK Government prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM Medical for deployment.</p> <h4>Knowledge & Skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</p> <p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p> <p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</p> <p>Working knowledge of technical publications and logistics information systems.</p> <p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</p> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical Requirements / Working Environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</p> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> <p>Will handle dirty parts and lubricants.</p> <p>Will be required to wear proper personal protective equipment (PPE).</p> <p>Must be able to pass a respirator physical and fit test qualification.</p> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> <p>May work in maintenance shop or outside.</p> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> <p>May be exposed to extreme noise from operating equipment.</p> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series. Responsibilities Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: · Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. · Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. · Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. · Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. · Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. · Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. · Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. · Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. · Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules.</li><li>Maintains accurate parts inventory during all maintenance activities.</li><li>Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability.</li><li>Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc.</li><li>Diagnoses malfunctions, isolate causes and corrects breaks.</li><li>Tests engine operations, using testing equipment to locate source(s) of malfunction.</li><li>Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices.</li><li>Disassembles and inspects parts for wear, warping, or other defects.</li><li>Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories.</li><li>Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions.</li><li>May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li><li>Highly desired to have a U.S. Passport valid for an additional two years with at least two facing pairs (four total) of blank Visa pages.</li></ul><p></p></section>

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p><strong>Requirements:</strong></p> <ul> <li>A valid FAA A&P Airframe and Powerplant Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>US citizenship is required to obtain a US government Secret Security Clearance and for facility access.</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Operationally check repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engine to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation using troubleshooting procedures and diagnostic test equipment to identify source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li> <li>Maintain knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid FAA A&P Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain required visas.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments in support of mission operations.</li> </ul> <h4>Medical and Security Clearance Requirements</h4> <ul> <li>All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</li> <li>Must be able to obtain and maintain a US government Secret Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials and authorization.</li> <li>US citizenship is required to hold a US government Secret Clearance and facility credentials and authorization to work at this facility.</li> </ul> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to a height of four feet and be required to lift up to 35 pounds to a height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through email and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components. A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access. Operationally checks repaired or modified systems for proper operation. Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment. Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks. Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft. Disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders. Ability to become qualified and perform engine runs for the aircraft type they are assigned to support. Ability to read, write, and interpret technical duties is required. Ability to communicate effectively with all levels of employees throughout the organization. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies. Perform other qualified duties as assigned. Minimum Requirements High school diploma or GED equivalent is Required. A valid (FAA) A&amp;P Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired. Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required. Six (6) months of flight line and overhaul &amp; inspection experience is preferred. Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait). A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa. Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training. May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20) Mechanic Pre-employment Medical Requirements: Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. Security Clearance Requirements: Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility. Physical and Additional Qualifications Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to carry, push or pull up to and may exceed 50 pounds. May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Must be able to distinguish color and judge three dimensional depths. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Must have minimum 20/100 near and far vision, correctable to 20/20. Must be capable of living and working in a potentially hostile environment for an extended period. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</li><li>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</li><li>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</li><li>High school diploma or GED equivalent is Required.</li><li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li><li>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li><li>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li><li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment.</li><li>Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li><li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li><li>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</li><li>Must be able to obtain and maintain a US Govt Secret Security Clearance.</li><li>Must be able to obtain and maintain facility credentials and authorization.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Carrying out all maintenance activities including the repairing, installation, and removal of equipment. Watchkeeping and cleaning the machinery spaces while considering the safety of personnel, the environment, and equipment to maximize drilling operation efficiency, reliability, and safety of the rig.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>Equipment Maintenance &amp; Operations:</strong> Provide engine and machinery watch keeping duties by monitoring machinery working temperatures and pressures, checking lubricating oil level readings and maintain daily log of all equipment s. Reporting any leaks, abnormal readings, vibrations or sounds to the shift supervisor as soon as possible and leakage shall be treated as a fire risk and dealt with immediately. Lubricate moving parts such as gears, shafts, and bearings on engines and auxiliary equipment. Carry out routine maintenance and minor repairs on the engine room equipment and machinery as directed. Assist with repairs to engines and equipment. Ensure that repairs needed or made are registered in the form of a work order in the company maintenance system Carry out Planned maintenance work orders on time with good quality and record actual work done, inform supervisor and Senior Tool pusher where access to perform work is not granted. Reference OEM manuals when carrying out preventative maintenance or CM work on any rig equipment do not reply solely on the preventative maintenance work instruction.</p><p><strong>Materials &amp; Equipment Keeping:</strong> Carry out stocktaking of maintenance department materials as directed. Maintain all tools and equipment in a clean and serviceable condition. Report damaged tool that require replacement to the Senior Mechanic and remove the damaged tool from service.</p><p><strong>Housekeeping:</strong> Maintain the engine and associated machine spaces and workshop clean and organized, free of hazards prior to &amp; upon completion of the work tasks, or repairs. Machine and switchboard areas to be kept clear of all flammable materials. Disposes debris as per the company s hazardous material segregations policy and as per waste management policy taking into consideration the environmental &amp; safety aspects.</p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Relevant technical certifications and experience in the oil field in related position may be considered instead of an Apprenticeship. At least one (1) year of working experience in drilling and workover operations with a reputable drilling contractor. Preferred to have working experience on Land rigs</p><p><strong>Skills/Competencies Required:</strong> Working knowledge of the English language. Situation Awareness, Communication, Teamwork.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pushing &amp; pulling in accordance with Company procedure. Frequent bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to work in day/night shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Relevant technical certifications and experience in the oil field in related position may be considered instead of an Apprenticeship. At least one (1) year of working experience in drilling and workover operations with a reputable drilling contractor. Preferred to have working experience on Land rigs</p><p><strong>Skills/Competencies Required:</strong> Working knowledge of the English language. Situation Awareness, Communication, Teamwork.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pushing &amp; pulling in accordance with Company procedure. Frequent bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to work in day/night shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p><strong>Veolia</strong>, a global leader in resource management, seeks a <strong>Technician (Mechanical)&nbsp;</strong>for our <strong>Sulaibiya Waste Water Treatment &amp; Reclamation Plant</strong> in Kuwait.</p><br><p>We specialize in innovative wastewater treatment and reclamation solutions, guided by our values of Responsibility, Solidarity, Respect, Innovation, and Customer Focus.</p><br><p>With a global workforce of 179,000, we're committed to sustainable development and optimizing resources. Join our team at this cutting-edge facility to contribute to environmental sustainability and water management in Kuwait.</p><br><p>At Veolia, you'll work on impactful projects, enjoy growth opportunities, and be part of our mission to lead the ecological transformation in wastewater treatment and reclamation.</p><br><br>Job Description<br><p><strong>Role:&nbsp;</strong></p><br><p>The Technician (Mechanical), reporting directly to Field Engineer (Mechanical), is responsible for performing maintenance and repair of mechanical equipment in the water reclamation plant. The position includes, but is not limited to, troubleshooting mechanical problems, performing preventive and corrective maintenance, and supporting the mechanical maintenance team in ensuring reliable operation of all mechanical systems in the Ultrafiltration (UF)/reverse osmosis (RO) plant.</p><br><p><strong>Responsibilities:&nbsp;</strong></p><br><p>• Carry out all preventive maintenance tasks and schedules for mechanical equipment in UF/RO facility.<br> • Troubleshoot malfunctions and operating defects and make the necessary repairs.<br> • Under the guidance of Field Engineer (Mechanical), carry out related plant modification works.<br> • Report and assist the Field Engineer (Mechanical) on the accomplishment of all maintenance activities to allow the correct operation of the plant.<br> • Execute required preventative maintenance procedures according to established schedules.<br> • Replace and install specified parts and/or make required adjustments.<br> • Perform maintenance and repair work on rotating equipment including pumps, compressors, blowers, chemical transfer/dosing pumps, and gearboxes.<br> • Conduct overhaul activities and spare parts replacement including seals, couplings, bearings, etc.<br> • Perform basic alignment works on rotating equipment.<br> • Ensure the equipment runs correctly and perform emergency repairs when required.<br> • Maintain and organize tools regularly and ensure proper tool management.<br> • Respond to requests for emergency repairs and services.<br> • Coordinate with Operation Team for reduced downtime in operations due to maintenance.<br> • Analyze routine checks and mechanical parameters to identify equipment faults and potential issues.<br> • Support the Field Engineer in preparing maintenance reports and documentation.<br> • Maintain knowledge of the report system to the extent required for timely and accurate input of field information into CMMS system.<br> • On-call availability and shift work with various schedules may also be required.<br> • Maintain a good housekeeping and adhere to EHS regulations and requirements.<br> • Optimize and assist with the development of operational quality system procedures/guidelines/documents for Water Treatment.<br> • Ensure adherence to EHS &amp; Quality processes and procedures, check job sites for potential hazards and report when things are against company policies.<br> • Maintain appropriate housekeeping for plant facilities cooperating with other departments.<br> • Ability to work independently most of the time, but report to supervisors.<br> • Train and coach Junior Technicians continuously.<br> • Determine the reasons for any malfunctions of systems or components and create a maintenance or repair plan to solve the problem.<br> • Provide technical assistance to junior team members regarding maintenance procedures.<br> • Participate in safety meetings and training programs.<br> • Maintain strong safety mindset to assure the executed work reflects the technical requirements within Veolia safety standards and EHS procedures at site.<br> • Perform administrative functions, such as completing work orders, time sheets, and maintenance logs on a complete, timely, and thorough basis.<br> • Work on prioritized &amp; emergency needs of the plant maintenance.<br> • Perform other tasks as directed.</p><br><br>Qualifications<br><p>• Diploma in Mechanical Engineering/Mechanical Trade certificate/ITI.<br> • Minimum 6 years of experience (at least 3 years for Diploma or 8 years for Trade/ITI certificate holder) in mechanical maintenance work in rotary equipment for water treatment/chemical/Oil refineries/power plants/RO plants or any other continuous manufacturing process industry.<br> • Minimum 4 years hands-on experience in overhauling, testing, repair and maintenance of all types of rotating equipment such as pumps, compressors, blowers, chemical transfer/dosing pumps, gearboxes and associated items such as seals, couplings, bearings, etc., including alignment works.<br> • Ability to communicate effectively in written &amp; spoken English.<br> • Knowledge of MS-OFFICE.<br> • Ability to work on prioritized &amp; emergency needs of the plant maintenance.<br> • Ability to establish and maintain relationship with co-workers &amp; supervisors.<br> • Strong troubleshooting and problem-solving skills.</p><br><br>Additional Information<br><p><strong>Desired Characteristics</strong></p><br><p>• Experience in water/wastewater treatment plant activities.<br> • Working experience in GCC countries.<br> • Ability to work in complete autonomy on assigned tasks.<br> • Ability to mentor and guide junior technicians.<br> • Capable of understanding the plant process &amp; P&amp;IDs to execute appropriate plant maintenance.<br> • Arabic language skill a plus.<br> • Proactive approach to identifying and resolving equipment issues.</p><br><p><strong>As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.</strong></p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Perform maintenance and repair of major assemblies and subassemblies of the T700/701C/D, T55-714 and auxiliary power units.</b></p> <ul> <li><p>Inspect engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks.</p></li> <li><p>Perform blade blending and blade replacement in cold section of powerplants.</p></li> <li><p>Replace or repair worn or damaged components, such as generators, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves.</p></li> <li><p>Ability to Perform hot section inspections and determine replacement of hot section components (GG rotors, stators, fuel injectors, igniters, power turbine.)</p></li> <li><p>Disassemble and inspect parts for wear, cracks, security, or other defects.</p></li> <li><p>Perform engine removal, replacement, reinstallation, and quick-change assembly (QCA) maintenance tasks.</p></li> </ul> <p><b>Knowledge &amp; Skills</b></p> <ul> <li><p>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p></li> <li><p>Thorough knowledge of aircraft electrical and avionics component and system troubleshooting, repair procedures and replacement of parts.</p></li> <li><p>Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.</p></li> <li><p>Working knowledge of technical publications and Logistics Information Systems.</p></li> <li><p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p></li> <li><p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p></li> <li><p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p></li> </ul> <p><b>Physical Requirements/Working Environment</b></p> <ul> <li><p>May work in aircraft maintenance hangar or outside.</p></li> <li><p>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></li> <li><p>May be exposed to extreme noise from turbine and jet engine aircraft.</p></li> <li><p>May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</p></li> <li><p>Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.</p></li> <li><p>Must be able to climb stairs, ramps, ladders, and work stands.</p></li> <li><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p></li> <li><p>May be required to lift up to 50 pounds.</p></li> <li><p>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</p></li> <li><p>Must be able to see imperfections, micrometer readings and other small scales.</p></li> <li><p>Must be able to communicate by voice and detect sound by ear.</p></li> <li><p>Must be able to distinguish color and judge three-dimensional depth.</p></li> <li><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc.</p></li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>The Aircraft Mechanic II -</b> <b>Powerplant/Engine Back Shop Mechanic (T700/701C/D, T55-714)</b> <b>with experience in all three MDS UH60, CH47 &amp; AH64</b> performs and inspects aviation unit (<b>AVUM</b>), intermediate (<b>AVIM</b>) and <b>depot maintenance</b> on assigned aircraft systems.</p> <p><b>Minimum Requirements</b></p> <ul> <li>High School Graduate or equivalent is required. </li> <li>Five (5) years of recent applicable aircraft maintenance experience is required.</li> <li><b>With A&amp;P</b> Two (2) years aviation maintenance experience, and Two (2) years' experience on MDS <b>UH60, CH47, &amp; AH64</b>is required.</li> <li><b>Without A&amp;P,</b> must have Three (3) years aviation maintenance experience, Three (3) years rotary wing aircraft experience and Two (2) years on the assigned Mission Design Series UH-60, AH-64, CH-47 (MDS) to qualify.</li> <li>All experience must be within the Five (5) most recent years.</li> <li>Must be in possession of a <b>Valid U.S. Passport</b> for travel internationally. Passport must contain a minimum of 6 Blank pages and 2 years remaining before expiration date.</li> <li>Ability to obtain/maintain a US Government Security Clearance (NAC-I T1) Public Trust. <b>US Citizenship is Required</b> to obtain a Security Clearance, and for facility access to this site.</li> <li>Able to clear CENTCOM MOD Physicals requirement for deployment. (Attend CRC).</li> <li>Must be able to obtain Kuwait Visa.</li> </ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supervise and lead a team of heavy vehicle technicians and mechanics. Allocate daily jobs and monitor work progress to ensure timely completion. Diagnose complex mechanical, electrical, hydraulic, pneumatic, and transmission faults. Oversee repair, maintenance, and overhaul of heavy trucks, buses, trailers, construction equipment, and commercial vehicles. Ensure all repairs are carried out according to manufacturer specifications and company quality standards. Conduct final inspection and testing before releasing vehicles to operations. Plan preventive maintenance schedules to minimize vehicle downtime. Coordinate with the Workshop Manager regarding manpower, spare parts, tools, and repair priorities. Monitor technician productivity and provide technical guidance and on-the-job training. Ensure proper use and maintenance of workshop tools, diagnostic equipment, and special service tools. Prepare job cards, maintenance reports, service records, and daily progress reports. Identify spare parts requirements and coordinate with the stores department for timely availability. Ensure compliance with safety regulations, environmental standards, and workshop housekeeping (5S). Investigate recurring vehicle failures and recommend corrective and preventive actions. Attend vehicle breakdowns and provide technical support when required. Ensure all work is completed within the allocated labor hours and budget. Enforce company policies, discipline, and safe working practices among workshop staff. Coordinate with fleet operations to prioritize urgent vehicle repairs. Support continuous improvement initiatives to increase workshop efficiency and reduce repair costs.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualification: Diploma or B.Tech in Mechanical, Automobile Engineering, or a related field. Experience: 510 years in heavy vehicle maintenance, including at least 2 3 years in a supervisory or foreman role. GCC/Middle East workshop experience is highly preferred.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job description</p><p><br></p><p>Position: Dental CAD/CAM Technician</p><p><br></p><p>Location: Overseas</p><p><br></p><p><br></p><p>Requirements:</p><p><br></p><p>Minimum 5 years of experience in Dental CAD/CAM</p><p>Diploma in Dental Technology / Dental Mechanics (2 years)</p><p>Valid Dental Technician Professional License</p><p>Expertise in Exocad and/or 3Shape</p><p>Experience in Crown &amp; Bridge Design</p><p>Implant Prosthesis</p><p>Digital Dental Workflow</p><p>STL &amp; CAM Workflow</p><p>Strong communication skills</p><p>Interested candidates should send:</p><p><br></p><p>Updated CV</p><p>Diploma Certificate</p><p>Professional License</p><p>Experience Certificates</p><p>Passport Copy</p><p>Only shortlisted candidates will be contacted.</p><p><br></p><p>Role: Healthcare &amp; Life Sciences - Other</p><p>Industry Type: Recruitment / Staffing</p><p>Department: Healthcare &amp; Life Sciences</p><p>Employment Type: Full Time, Temporary/Contractual</p><p>Role Category: Healthcare &amp; Life Sciences - Other</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 5 years of experience in Dental CAD/CAM</li><li>Diploma in Dental Technology / Dental Mechanics (2 years)</li><li>Valid Dental Technician Professional License</li><li>Expertise in Exocad and/or 3Shape</li><li>Experience in Crown &amp; Bridge Design</li><li>Implant Prosthesis</li><li>Digital Dental Workflow</li><li>STL &amp; CAM Workflow</li><li>Strong communication skills</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Common Support Equipment Technician diagnoses, repairs, and maintains Common Support Equipment (CSE). Responsibilities include troubleshooting malfunctions, performing scheduled and unscheduled maintenance, analyzing maintenance trends, and documenting actions using automated systems. Technicians utilize various diagnostic tools, such as multi-meters and oscilloscopes, to repair mechanical and electronic systems. They also handle fluids, conduct corrosion treatments, manage hazardous materials, and prepare CSE for deployment. The role includes operating and servicing support equipment and tow vehicles, while adhering to safety, Tool Control, and Foreign Object Damage prevention standards at all times.</p><p>SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times.</p><p>ESSENTIAL FUNCTIONS Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conduct off station maintenance when required. When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS).</p><p>PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language.</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration.</li><li>Graduation from a standard four (4) year high school or equivalent (GED).</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures).</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing - I Level &amp; O Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required.</li><li>Have a strong knowledge base of Intermediate Level Maintenance business procedures.</li><li>Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver s license.</li><li>Must have an in-depth knowledge of technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must have a working knowledge (input and extract data) of computers.</li><li>Must be willing and able to work with job required hazardous materials.</li><li>Must be willing and able to conduct specialty on the job training.</li></ul><p></p></section>