وظائف ميكانيكى سفن

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p><p>Operationally checks repaired or modified systems for proper operation.</p><p>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</p><p>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.</p><p>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</p><p>Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.</p><p>Disassemble and inspect parts for wear, warping, or other defects.</p><p>Repair or replace defective engine parts and reassembles and installs engine in aircraft.</p><p>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</p><p>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</p><p>Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.</p><p>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</p><p>Ability to read, write, and interpret technical duties is required.</p><p>Ability to communicate effectively with all levels of employees throughout the organization.</p><p>May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.</p><p>Perform other qualified duties as assigned.</p><p>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</p><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to climb stairs, ramps, ladders and work stands.</p><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>May be required to carry, push or pull up to and may exceed 50 pounds.</p><p>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</p><p>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</p><p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>Must be able to distinguish color and judge three dimensional depths.</p><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</p><p>Must have minimum 20/100 near and far vision, correctable to 20/20.</p><p>Must be capable of living and working in a potentially hostile environment for an extended period.</p><p>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</p><p>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</p><p>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</p><p>Minimum Requirements</p><p>High school diploma or GED equivalent is Required.</p><p>A valid (FAA) A&amp;P Certificate is Required.</p><p>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</p><p>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</p><p>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</p><p>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</p><p>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</p><p>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait).</p><p>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</p><p>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</p><p>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20)</p><p>Mechanic Pre-employment Medical Requirements:</p><p>Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</p><p>Security Clearance Requirements:</p><p>Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components. A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access. Operationally checks repaired or modified systems for proper operation. Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment. Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks. Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft. Disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders. Ability to become qualified and perform engine runs for the aircraft type they are assigned to support. Ability to read, write, and interpret technical duties is required. Ability to communicate effectively with all levels of employees throughout the organization. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies. Perform other qualified duties as assigned. Minimum Requirements High school diploma or GED equivalent is Required. A valid (FAA) A&amp;P Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired. Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required. Six (6) months of flight line and overhaul &amp; inspection experience is preferred. Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait). A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa. Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training. May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20) Mechanic Pre-employment Medical Requirements: Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. Security Clearance Requirements: Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility. Physical and Additional Qualifications Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to carry, push or pull up to and may exceed 50 pounds. May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Must be able to distinguish color and judge three dimensional depths. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Must have minimum 20/100 near and far vision, correctable to 20/20. Must be capable of living and working in a potentially hostile environment for an extended period. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</li><li>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</li><li>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</li><li>High school diploma or GED equivalent is Required.</li><li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li><li>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li><li>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li><li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment.</li><li>Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li><li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li><li>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</li><li>Must be able to obtain and maintain a US Govt Secret Security Clearance.</li><li>Must be able to obtain and maintain facility credentials and authorization.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a Rig Mechanic Deep Drilling with extensive land rig maintenance experience for our client in Kuwait. Position Overview: The Rig Mechanic Deep Drilling will be responsible for maintaining, troubleshooting, and repairing mechanical systems and equipment on deep drilling land rigs to ensure maximum operational reliability and uptime. Key Responsibilities: Mechanical Maintenance: Perform preventive and corrective maintenance on drilling rig mechanical equipment. Inspect, troubleshoot, and repair mud pumps, drawworks, top drives, rotary systems, and auxiliary equipment. Diagnose mechanical failures and implement effective corrective actions. Ensure equipment operates in accordance with OEM recommendations. Equipment Reliability: Support preventive and predictive maintenance programs. Participate in root cause failure analysis activities. Ensure accurate maintenance documentation and reporting. Assist in minimizing equipment downtime and improving reliability. Compliance &amp; Safety: Comply with company HSE policies and procedures. Participate in safety meetings, inspections, and emergency drills. Ensure safe work practices are followed during maintenance activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Technical Diploma in Mechanical Engineering or related discipline.</li><li>Minimum 5+ years of mechanical maintenance experience on drilling rigs.</li><li>Extensive experience supporting deep drilling land rigs.</li><li>Strong knowledge of drilling rig mechanical systems and equipment.</li><li>Ability to troubleshoot and repair complex mechanical equipment.</li><li>Good communication skills in English.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform maintenance and repair of rig mechanical equipment</p> <ul> <li>Troubleshoot mechanical issues to reduce operational downtime</li> <li>Supervise and support junior mechanics and maintenance crew</li> <li>Conduct routine inspections and preventive maintenance activities</li> <li>Ensure compliance with safety and operational standards</li> <li>Maintain maintenance records and report equipment performance issues</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>We are seeking a Senior Mechanic to oversee maintenance, repair, and troubleshooting of mechanical equipment used in drilling operations. The ideal candidate should have strong technical knowledge, leadership abilities, and experience with heavy machinery and rig systems.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring a Mechanic/Electric Helper to support maintenance teams in repairing, servicing, and maintaining mechanical and electrical equipment on the rig. The candidate should be willing to learn, safety-focused, and able to assist skilled technicians in daily operations.</p> <ul> <li>Assist mechanics and electricians in maintenance and repair work</li> <li>Support troubleshooting of mechanical and electrical equipment issues</li> <li>Carry tools, materials, and equipment to job sites as required</li> <li>Perform basic cleaning, lubrication, and routine upkeep tasks</li> <li>Follow all safety procedures and use PPE at all times</li> <li>Help in inspection and testing of rig equipment under supervision</li> </ul></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a skilled Asphalt Plant Mechanic to carry out maintenance, repair, and troubleshooting works for asphalt plant equipment and related machinery. The candidate will be responsible for ensuring that the plant operates efficiently with minimum downtime by performing preventive and corrective maintenance.</p><p>Key Responsibilities</p><ul><li>Perform mechanical maintenance and repair works for asphalt plant equipment.</li><li>Inspect and maintain conveyors, belts, rollers, gearboxes, motors, bearings, elevators, screens, dryer drum, burner components, pumps, valves, and bitumen lines.</li><li>Troubleshoot mechanical breakdowns and carry out urgent repairs to reduce production downtime.</li><li>Perform preventive maintenance according to the maintenance schedule.</li><li>Replace damaged or worn-out parts and ensure proper alignment and fitting.</li><li>Coordinate with the plant operator and maintenance supervisor regarding plant issues.</li><li>Maintain tools, equipment, and spare parts in good condition.</li><li>Assist in plant startup, shutdown, and inspection activities.</li><li>Follow safety procedures during maintenance works, especially lockout/tagout and hot work activities.</li><li>Keep maintenance records and report required spare parts.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Previous experience as a mechanic in an asphalt plant, crusher plant, batching plant, or similar industrial plant is required.</p><p>Strong knowledge of mechanical systems, conveyors, bearings, gearboxes, pumps, belts, and industrial equipment.</p><p>Ability to troubleshoot mechanical faults quickly and safely.</p><p>Basic welding, cutting, and fabrication skills are preferred.</p><p>Ability to read basic mechanical drawings and understand equipment manuals.</p><p>Good practical knowledge of preventive maintenance.</p><p>Ability to work under pressure during plant breakdowns.</p><p>Good teamwork and communication skills.</p><p>Commitment to safety rules and proper use of tools and PPE.</p><p>Previous experience in Kuwait or GCC is preferred.</p></div>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will supervise, perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply advanced technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Craftsman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic and advanced technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to acquire and maintain SCR task(s) for position, as required (MQ-9 Engine Run, Flex Borescope, etc.)</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li> <li>Provides training to lower-level Aircraft Mechanics.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of five years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of two years’ experience on MQ-9 aircraft, as aircraft mechanic.</li> <li>Must have advanced knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Mechanic maintenance experience required. Must have basic knowledge of basic and complex mechanical maintenance and repair. Must possess basic knowledge of technical publications related to aircraft mechanical maintenance. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems. Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to Deploy to Forward Locations (other countries) as Directed by the Government Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must submit updated SF-86 within 30 days of hire start date. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p><p>Associate degree in a relevant career field. Licensed by the FAA as an Airframe and Powerplant Mechanic. RPA Deployment Experience. Prior Experience as a Defense Contractor. Aircraft Mechanic Experience within the last 10 years. MQ-9 Experience as an Aircraft Mechanic. MQ-9 Aircraft Composite Repair / Replacement Experience.</p><p></p></section>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p><strong>Requirements:</strong></p> <ul> <li>A valid FAA A&P Airframe and Powerplant Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>US citizenship is required to obtain a US government Secret Security Clearance and for facility access.</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Operationally check repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engine to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation using troubleshooting procedures and diagnostic test equipment to identify source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li> <li>Maintain knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid FAA A&P Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain required visas.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments in support of mission operations.</li> </ul> <h4>Medical and Security Clearance Requirements</h4> <ul> <li>All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</li> <li>Must be able to obtain and maintain a US government Secret Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials and authorization.</li> <li>US citizenship is required to hold a US government Secret Clearance and facility credentials and authorization to work at this facility.</li> </ul> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to a height of four feet and be required to lift up to 35 pounds to a height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through email and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Carrying out all maintenance activities including the repairing, installation, and removal of equipment. Watchkeeping and cleaning the machinery spaces while considering the safety of personnel, the environment, and equipment to maximize drilling operation efficiency, reliability, and safety of the rig.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>Equipment Maintenance &amp; Operations:</strong> Provide engine and machinery watch keeping duties by monitoring machinery working temperatures and pressures, checking lubricating oil level readings and maintain daily log of all equipment s. Reporting any leaks, abnormal readings, vibrations or sounds to the shift supervisor as soon as possible and leakage shall be treated as a fire risk and dealt with immediately. Lubricate moving parts such as gears, shafts, and bearings on engines and auxiliary equipment. Carry out routine maintenance and minor repairs on the engine room equipment and machinery as directed. Assist with repairs to engines and equipment. Ensure that repairs needed or made are registered in the form of a work order in the company maintenance system Carry out Planned maintenance work orders on time with good quality and record actual work done, inform supervisor and Senior Tool pusher where access to perform work is not granted. Reference OEM manuals when carrying out preventative maintenance or CM work on any rig equipment do not reply solely on the preventative maintenance work instruction.</p><p><strong>Materials &amp; Equipment Keeping:</strong> Carry out stocktaking of maintenance department materials as directed. Maintain all tools and equipment in a clean and serviceable condition. Report damaged tool that require replacement to the Senior Mechanic and remove the damaged tool from service.</p><p><strong>Housekeeping:</strong> Maintain the engine and associated machine spaces and workshop clean and organized, free of hazards prior to &amp; upon completion of the work tasks, or repairs. Machine and switchboard areas to be kept clear of all flammable materials. Disposes debris as per the company s hazardous material segregations policy and as per waste management policy taking into consideration the environmental &amp; safety aspects.</p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Relevant technical certifications and experience in the oil field in related position may be considered instead of an Apprenticeship. At least one (1) year of working experience in drilling and workover operations with a reputable drilling contractor. Preferred to have working experience on Land rigs</p><p><strong>Skills/Competencies Required:</strong> Working knowledge of the English language. Situation Awareness, Communication, Teamwork.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pushing &amp; pulling in accordance with Company procedure. Frequent bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to work in day/night shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Relevant technical certifications and experience in the oil field in related position may be considered instead of an Apprenticeship. At least one (1) year of working experience in drilling and workover operations with a reputable drilling contractor. Preferred to have working experience on Land rigs</p><p><strong>Skills/Competencies Required:</strong> Working knowledge of the English language. Situation Awareness, Communication, Teamwork.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pushing &amp; pulling in accordance with Company procedure. Frequent bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to work in day/night shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p></p></section>

<p><strong>Job Overview</strong></p><p>We are seeking a highly motivated Asphalt Plant Mechanic to join our operations in Kuwait.&nbsp;</p><p>This internship-level role provides hands-on experience in the maintenance, troubleshooting, and repair of asphalt production equipment within a dynamic, safety-conscious environment.&nbsp;</p><p>The successful candidate will gain exposure to plant systems, preventive maintenance programs, and real-world problem solving, supporting the continuous, efficient operation of asphalt production facilities.</p><p>&nbsp;</p><p><strong>About the Company</strong></p><p>Our organization is a leading provider of asphalt and paving solutions, delivering high-quality materials and services for infrastructure projects.&nbsp;</p><p>We emphasize safety, reliability, and innovation, offering opportunities for development in a collaborative setting.&nbsp;</p><p>The role offers practical training and progression opportunities for early-career professionals seeking to build a foundation in heavy equipment maintenance within the construction materials sector.</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><ul><li>Assist senior mechanics in the inspection, upkeep, and repair of asphalt plant equipment (drums, conveyors, dryers, filters, burners, pumps, hydraulics, and control systems).</li><li>Participate in scheduled preventive maintenance tasks and document findings to support reliability programs.</li><li>Support troubleshooting of mechanical, electrical, and control system issues under supervision, including reading schematics and wiring diagrams.</li><li>Conduct routine safety checks, manage inventory of tools and spare parts, and ensure adherence to PPE and site safety procedures.</li><li>Assist in start-up and shutdown procedures, calibration, and performance testing of plant components.</li><li>Collaborate with operations and maintenance teams to minimize downtime and optimize plant efficiency.</li><li>Maintain accurate records of maintenance activities, work orders, and materials usage.</li><li>Participate in training sessions to develop technical competencies and professional growth within the maintenance discipline.</li></ul><p>&nbsp;</p><p><strong>Qualifications and Requirements</strong></p><ul><li>Bachelor’s degree in a related field (Engineering or a technical discipline) or enrolled in a university program with internship eligibility.</li><li>Interest in heavy equipment maintenance, with a focus on asphalt production systems.</li><li>Basic understanding of mechanical systems, hydraulics, pneumatics, and electrical controls; willingness to learn and apply problem-solving skills.</li><li>Ability to read technical drawings, schematics, and equipment manuals.</li><li>Strong safety mindset and commitment to following established procedures and regulations.</li><li>Effective communication skills and the ability to work well within a team environment.</li><li>Eligibility to work in Kuwait and willingness to comply with local regulatory requirements.</li></ul><p>&nbsp;</p><p><strong>Required Skills</strong></p><ul><li>Mechanical aptitude with hands-on debugging and repair capabilities.</li><li>Basic electrical and control systems literacy (PLC/SCADA knowledge is a plus).</li><li>Problem-solving orientation and attention to detail.</li><li>Strong organizational skills and ability to maintain accurate records.</li><li>Safety-conscious attitude and adherence to site safety guidelines.</li></ul><p>&nbsp;</p><p><strong>Benefits and Perks</strong></p><ul><li>Structured internship program with mentorship from experienced technicians.</li><li>Hands-on training across asphalt plant systems and preventive maintenance procedures.</li><li>Opportunities for professional development and potential advancement within the maintenance team.</li><li>Competitive compensation aligned with internship standards and local market practices.</li><li>Comprehensive safety training and access to company-wide safety programs.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br>Supports an Aircraft Ground Equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.<br>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.<br>USAF equivalent position is AGE Mechanic Apprentice.<br><b>Essential Responsibilities:</b><br>• Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.<br>• Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.<br>• Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.<br>• Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, Foreign Object Damage prevention, and safety at all times.<br>• Performs all other duties as assigned or requested.<br>Minimum Requirements<br>• Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.<br>• Minimum of one-year actual AGE maintenance experience required.<br>• Must be qualified with most basic types and uses of AGE equipment.<br>• Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.<br>• Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.<br>• Must be able to inspect, repair, and operate ground support and auxiliary equipment.<br>• Must achieve a passing grade in all required courses/certifications for continued employment, as needed.<br>• Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.<br>• Must be able to Deploy to Forward Locations (other countries) as Directed by the Government<br>• Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.<br>• Must be able to speak, read, write, and understand English.<br>• Must submit updated SF-86 within 30 days of hire start date.<br>• Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.<br>• Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.<br>• Must have current/active State Issued Driver s License.<br>• Must be able to acquire and maintain a valid flight-line Government Driver s License.<br>• Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.<br>• Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.<br><b>Preferred Qualifications</b><br>• Associate degree in a relevant career field.<br>• RPA Deployment experience.<br>• Prior experience as a Defense Contractor.<br>• Vehicle Operator Training.<br>• AGE Mechanic experience within the last 10 years.<br></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Supports an Aircraft Ground Equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment. Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable. USAF equivalent position is AGE Mechanic Apprentice. Essential Responsibilities: Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications. Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations. Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles. Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, Foreign Object Damage prevention, and safety at all times. Performs all other duties as assigned or requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one-year actual AGE maintenance experience required.</li><li>Must be qualified with most basic types and uses of AGE equipment.</li><li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li><li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment experience.</li><li>Prior experience as a Defense Contractor.</li><li>Vehicle Operator Training.</li><li>AGE Mechanic experience within the last 10 years.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Perform maintenance and repair of major assemblies and subassemblies of the T700/701C/D, T55-714 and auxiliary power units.</b></p> <ul> <li><p>Inspect engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks.</p></li> <li><p>Perform blade blending and blade replacement in cold section of powerplants.</p></li> <li><p>Replace or repair worn or damaged components, such as generators, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves.</p></li> <li><p>Ability to Perform hot section inspections and determine replacement of hot section components (GG rotors, stators, fuel injectors, igniters, power turbine.)</p></li> <li><p>Disassemble and inspect parts for wear, cracks, security, or other defects.</p></li> <li><p>Perform engine removal, replacement, reinstallation, and quick-change assembly (QCA) maintenance tasks.</p></li> </ul> <p><b>Knowledge &amp; Skills</b></p> <ul> <li><p>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p></li> <li><p>Thorough knowledge of aircraft electrical and avionics component and system troubleshooting, repair procedures and replacement of parts.</p></li> <li><p>Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.</p></li> <li><p>Working knowledge of technical publications and Logistics Information Systems.</p></li> <li><p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p></li> <li><p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p></li> <li><p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p></li> </ul> <p><b>Physical Requirements/Working Environment</b></p> <ul> <li><p>May work in aircraft maintenance hangar or outside.</p></li> <li><p>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></li> <li><p>May be exposed to extreme noise from turbine and jet engine aircraft.</p></li> <li><p>May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</p></li> <li><p>Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.</p></li> <li><p>Must be able to climb stairs, ramps, ladders, and work stands.</p></li> <li><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p></li> <li><p>May be required to lift up to 50 pounds.</p></li> <li><p>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</p></li> <li><p>Must be able to see imperfections, micrometer readings and other small scales.</p></li> <li><p>Must be able to communicate by voice and detect sound by ear.</p></li> <li><p>Must be able to distinguish color and judge three-dimensional depth.</p></li> <li><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc.</p></li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>The Aircraft Mechanic II -</b> <b>Powerplant/Engine Back Shop Mechanic (T700/701C/D, T55-714)</b> <b>with experience in all three MDS UH60, CH47 &amp; AH64</b> performs and inspects aviation unit (<b>AVUM</b>), intermediate (<b>AVIM</b>) and <b>depot maintenance</b> on assigned aircraft systems.</p> <p><b>Minimum Requirements</b></p> <ul> <li>High School Graduate or equivalent is required. </li> <li>Five (5) years of recent applicable aircraft maintenance experience is required.</li> <li><b>With A&amp;P</b> Two (2) years aviation maintenance experience, and Two (2) years' experience on MDS <b>UH60, CH47, &amp; AH64</b>is required.</li> <li><b>Without A&amp;P,</b> must have Three (3) years aviation maintenance experience, Three (3) years rotary wing aircraft experience and Two (2) years on the assigned Mission Design Series UH-60, AH-64, CH-47 (MDS) to qualify.</li> <li>All experience must be within the Five (5) most recent years.</li> <li>Must be in possession of a <b>Valid U.S. Passport</b> for travel internationally. Passport must contain a minimum of 6 Blank pages and 2 years remaining before expiration date.</li> <li>Ability to obtain/maintain a US Government Security Clearance (NAC-I T1) Public Trust. <b>US Citizenship is Required</b> to obtain a Security Clearance, and for facility access to this site.</li> <li>Able to clear CENTCOM MOD Physicals requirement for deployment. (Attend CRC).</li> <li>Must be able to obtain Kuwait Visa.</li> </ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series. Responsibilities Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: · Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. · Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. · Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. · Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. · Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. · Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. · Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. · Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. · Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Responsibilities Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Graduation from a standard four (4) year high school or equivalent (GED)</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules.</li><li>Maintains accurate parts inventory during all maintenance activities.</li><li>Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability.</li><li>Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc.</li><li>Diagnoses malfunctions, isolate causes and corrects breaks.</li><li>Tests engine operations, using testing equipment to locate source(s) of malfunction.</li><li>Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices.</li><li>Disassembles and inspects parts for wear, warping, or other defects.</li><li>Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories.</li><li>Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions.</li><li>May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li><li>Highly desired to have a U.S. Passport valid for an additional two years with at least two facing pairs (four total) of blank Visa pages.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p><p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Graduation from a standard four (4) year high school or equivalent (GED)</p></section>

<p><h4>Job Description</h4> <p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and be responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <p>This role requires the candidate to obtain Disclosure and Barring Service (DBS) check through UK Government prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM Medical for deployment.</p> <h4>Knowledge & Skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</p> <p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p> <p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</p> <p>Working knowledge of technical publications and logistics information systems.</p> <p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</p> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical Requirements / Working Environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</p> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> <p>Will handle dirty parts and lubricants.</p> <p>Will be required to wear proper personal protective equipment (PPE).</p> <p>Must be able to pass a respirator physical and fit test qualification.</p> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> <p>May work in maintenance shop or outside.</p> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> <p>May be exposed to extreme noise from operating equipment.</p> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></p><p></p>