وظائف مراقب ميداني - الأحمدي الكويت

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under broad direction, provides well site service to customers of Baroid. Demonstrates advanced knowledge of colloidal and general chemistry, volume and hydraulics calculations and routine and specialized testing to varied field experiences. Provides guidance, including facilitating formal training, to fluid service representatives on company products and services, how drilling fluid technology can optimize service quality, industry knowledge, rig schedules, and rig operations. Conducts and interprets routine and specialized testing that provide technical guidance of Baroid's customized engineering fluids to maximize wellbore value. Tracks material usage and maintains record of same for inventory and billing purposes. Maintains good working relationship with operator's representative and rig personnel. Assists the operator's representative in specific operations planning and drilling operation optimization. Assists the Baroid Technical Professional and Operations staff in well planning and business delivery activities. Reviews well recaps for accuracy and capture of lessons learned. Takes an active role in mentoring Field Service Representatives. Complies with health, safety and environment regulations in all aspects of job performance.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum requirements are a H.S. Diploma, completed mud training at Halliburton and 10 years in fluid services. Completion of an undergraduate degree in any discipline is preferred. Mud Training Required. Math Test Required.</p><p>Minimum educational degree in Engineering / Technology / graduate in Science with Chemistry one of the subject. Minimum experience of ten (10) years for providing drilling fluid engineering services including drilling of at least five (5) oil &amp; gas wells with measured depth above 16,000 ft and / or mud weight 18 ppg &amp; above Should have obtained adequate training or exposure in handling H2S influx situations and should have valid H2S certificate at all times during the performance of Services at the Well Site.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for an experienced Mechanical Lifting SME to join our team on a major field development project in North Kuwait.This is a senior, high-accountability role embedded within a large-scale integrated drilling and facilities operation, with direct client interface on all lifting and regulatory matters.</p><p><strong>What the role covers:</strong></p><ul><li>End-to-end ownership of the project Mechanical Lifting Programme: planning, lift plan review and approval, lift categorisation, equipment register management, and execution oversight of Critical and Non-Routine lifts</li><li>Direct interface with the client Lifting Authority for plan submission and regulatory compliance</li><li>Competency assessment and supervision of lifting crews across multiple simultaneous drilling contractors</li><li>Audit and compliance management across all project phases, from pad construction through well testing and production</li><li>LEEA Appointed Person certification (or internationally recognised equivalent)</li><li>Minimum 8 years in dedicated ML supervisory or SME roles in onshore O&amp;G environments</li><li>Demonstrated experience managing lifting programmes in multi-contractor setting</li><li>Candidates with additional experience and credentials in Dropped Objects Prevention programme management and DROPS system auditing will stand out</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>LEEA Appointed Person certification (or internationally recognised equivalent)</p><p>Minimum 8 years in dedicated ML supervisory or SME roles in onshore O&amp;G environments</p><p>Demonstrated experience managing lifting programmes in multi-contractor setting</p><p>Candidates with additional experience and credentials in Dropped Objects Prevention programme management and DROPS system auditing will stand out</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under broad direction, provides well site service to customers of Baroid. Demonstrates advanced knowledge of colloidal and general chemistry, volume and hydraulics calculations and routine and specialized testing to varied field experiences. Provides guidance, including facilitating formal training, to fluid service representatives on company products and services, how drilling fluid technology can optimize service quality, industry knowledge, rig schedules, and rig operations. Conducts and interprets routine and specialized testing that provide technical guidance of Baroid's customized engineering fluids to maximize wellbore value. Tracks material usage and maintains record of same for inventory and billing purposes. Maintains good working relationship with operator's representative and rig personnel. Assists the operator's representative in specific operations planning and drilling operation optimization. Assists the Baroid Technical Professional and Operations staff in well planning and business delivery activities. Reviews well recaps for accuracy and capture of lessons learned. Takes an active role in mentoring Field Service Representatives. Complies with health, safety and environment regulations in all aspects of job performance. Minimum requirements are a H.S. Diploma, completed mud training at Halliburton and 10 years in fluid services. Completion of an undergraduate degree in any discipline is preferred. Mud Training Required. Math Test Required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum educational degree in Engineering / Technology / graduate in Science with Chemistry one of the subject.<br>Minimum experience of ten (10) years for providing drilling fluid engineering services including drilling of at least five (5) oil &amp; gas wells with measured depth above 16,000 ft and / or mud weight 18 ppg &amp; above<br>Should have obtained adequate training or exposure in handling H2S influx situations and should have valid H2S certificate at all times during the performance of Services at the Well Site.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design and analyze structural systems, ensuring they meet safety standards and regulations while considering environmental impact.</li><li>Prepare detailed project plans, including timelines and budgets, to ensure efficient project execution and resource allocation.</li><li>Conduct site inspections and assessments to monitor construction progress and compliance with design specifications.</li><li>Collaborate with architects, contractors, and other engineers to resolve design issues and implement effective solutions.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Civil Engineering or a related field, with a strong foundation in engineering principles and practices.</p></li><li><p>Professional Engineer (PE) license is preferred, demonstrating a commitment to industry standards and ethics.</p></li><li><p>Minimum of 3-5 years of relevant work experience in civil engineering, in oil and gas industry</p></li><li><p>Proficient in AutoCAD, Civil 3D, and other industry-standard design software to create and modify engineering drawings.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Operate and maintain Managed Pressure Drilling (MPD) equipment, ensuring optimal performance and safety during drilling operations.</li><li>Monitor wellbore pressure, flow rates, and other critical parameters in real-time to detect and mitigate potential well control issues.</li><li>Perform routine inspections, maintenance, and troubleshooting of MPD systems, including pumps, chokes, and control systems.</li><li>Collaborate with the drilling team, including the driller, mud engineer, and rig supervisor, to optimize MPD parameters and procedures.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Possesses a relevant technical degree or diploma in engineering or a related field.</li><li>Holds certifications in well control and MPD operations, such as IWCF or equivalent.</li><li>Demonstrates a minimum of 5 years of experience in the oil and gas industry, with a focus on drilling operations.</li><li>Exhibits a strong understanding of MPD principles, equipment, and operational procedures.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Conduct comprehensive safety audits and inspections to identify potential hazards and ensure compliance with regulatory standards.</li><li>Develop and implement effective safety training programs tailored to various roles within the organization.</li><li>Investigate accidents and near misses thoroughly, compiling reports that provide actionable insights and prevent future incidents.</li><li>Monitor and evaluate the effectiveness of safety measures and procedures, adjusting them as necessary to enhance workplace safety.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Occupational Health and Safety, Environmental Science, or a related field is preferred.</li><li>At least 5 years of experience in a safety role, ideally within [specific industry such as construction, manufacturing, etc.].</li><li>Certification in safety management (e.g., NEBOSH, IOSH) is highly desirable to demonstrate expertise in safety practices.</li><li>Proficient in safety management software and tools for tracking incidents and compliance.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under direct supervision, assists during the rigging up and down of service line equipment on work locations both on and off shore. Performs basic GeoBalance Applications operations through preparation of equipment for installation and services. Assists in the running of a job, clean up, repair, and preparation for next job. Monitors instruments and performs necessary calculations to assure quality of the data at the well. Works in the shop, assisting in the repair and maintenance of equipment. Must be able to visually identify various tool components by type and size and explain the function of each. Promotes good customer relations at the well site, and ensures customer satisfaction with results. Skills are acquired through the completion of a high school diploma and 3+years of experience in oil field drilling activities, including 2+ years of underbalanced drilling and/or managed pressure drilling. The ability to perform basic mathematical calculations is required. Basic reading comprehension and writing skills are required. Must have met the minimum competency requirements for Svc Operator-GBA.</p> <p><b>Job Duties</b></p> <p><b>Qualifications</b></p> <p><b>Job Details</b></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Diploma in Petroleum, or Mechanical, or Electrical or Electronics Engineering</b><br>3+ years of experience in Oil Field Drilling activities including 2+ years of underbalanced drilling and/or managed pressure drilling.<br>Candidate currently in Kuwait with Transferable residency article 18 is a good plus<br>Must have good communication skills, reading and writting.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Are you an experienced ��� ���������� ����� ������������ with a strong background in the ���������� ��������? We're looking for a driven and results-oriented individual to join our team and accelerate business growth in Kuwait.</p><br><p>✔ Drive B2B lubricants sales by acquiring new customers and growing existing accounts. ✔ Build and maintain strong relationships with customers and business partners. ✔ Achieve sales targets through effective planning and execution. ✔ Identify new business opportunities and monitor market trends and competitor activities. ✔ Provide technical support and product recommendations before and after sales. ✔ Support sales strategy, budgeting, forecasting, and business planning.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>� Bachelor's degree in Science, Mechanical Engineering, Chemical Engineering, or a related field. � Proven experience in <strong>B2B lubricants sales</strong> within a competitive market. � Strong business development, negotiation, and customer relationship management skills. � Ability to provide technical product support to customers. � Excellent communication skills in English. � Proficiency in MS Office (Excel, PowerPoint, and Word). � Proactive, self-motivated, and target-driven.</p><br><br><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Administer and support enterprise LAN, WAN, Internet, and telecom infrastructure.</p></li><li><p>Analyze business requirements and provide technical design recommendations for network and telecom enhancements.</p></li><li><p>Implement infrastructure projects, upgrades, and major network changes.</p></li><li><p>Monitor network performance, availability, and security across the organization.</p></li><li><p>Manage routers, switches, firewalls, VPNs, and remote access solutions.</p></li><li><p>Support telephone systems, VoIP services, and telecom infrastructure.</p></li><li><p>Coordinate with telecom providers, ISPs, vendors, and service partners.</p></li><li><p>Define and maintain network standards, procedures, and security policies.</p></li><li><p>Manage network backup, redundancy, disaster recovery, and business continuity requirements.</p></li><li><p>Prepare and maintain network documentation, architecture diagrams, and operational procedures.</p></li><li><p>Troubleshoot network and telecom incidents to ensure uninterrupted business operations.</p></li><li><p>Support 24×7 operational requirements and critical infrastructure environments.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Computer Science, Information Technology, or a related field, demonstrating a strong foundational understanding.</p></li><li><p>Minimum of 5 years of progressive experience in network and telecommunications administration within a corporate environment.</p><br></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Completion &amp; Well Intervention Engineer specializes in Completions and/or Workovers. The Senior Completion &amp; Well Intervention Engineer is responsible for well engineering and operations support for one or more completion, workover rigs or rigless completion operation including preparing Completion and Workover Programs and procedures and AFE's. This person supervises and mentors Field Engineer Trainees and junior engineers, and attends critical operations at the wellsite as necessary, as a technical advisor. Work with Subsurface and Production to ensure completion and workover plans meet requirements and objectives.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Reviews Completion Basis of Design and performs detailed design checks.</li><li>Review all completion hardware components for compatibility with clearances, setting pressure/turns/weight, and couplings.</li><li>Review regulatory requirements to determine downhole and surface safety equipment requirements and confirm compliance of final equipment configuration.</li><li>Review current well status and well integrity.</li><li>Prepare final well status post completion / workover.</li><li>Prepare completion / workover operations flowchart and contingencies.</li><li>Confirm final hardware design and compatibility (stimulation, treating, production) with TDAS.</li><li>Write program for making up sub-assemblies, drifting, gauging and pressure testing prior to them being RIH.</li><li>Determine required fluid density and composition for formation compatibility to minimize formation damage and manage fluid losses.</li><li>Review and determine compatibility of all slickline and wireline operations required.</li><li>Review fishing tool requirements and alternatives (workover).</li><li>Write program for setting cement plugs e.g. squeezing perforations, and any remedial cementing (workover).</li><li>Review and insure compliance with high pressure treating standards.</li><li>Ensure compliance with IPM Standards for Simultaneous Activities.</li><li>Ensure IPM Barrier Standards is complied with when removing the BOP and installing the Christmas Tree.</li><li>Prepares Completion / Workover Programs and follows the execution of programs technically.</li><li>Prepares Completion / Workover procedures.</li><li>Prepares Completion / Workover time estimates and AFE's.</li><li>Review the program with all parties involved (drilling contractor, completion, wellhead, slickline, etc.).</li><li>Participates in selection and evaluation of service companies, suppliers and equipment.</li><li>Ensures proper communication with relevant parties (client, Product Lines, third parties, etc.).</li><li>Participates in cost control of programs Vs AFE by analyzing solutions.</li><li>Reviews new technology for possible application to project.</li><li>Uses InTouch for best practices, lessons learned and technical alerts.</li><li>Participates in HARC preparation.</li><li>Prepares requests for exemptions to IPM Standards in QUEST.</li><li>Enters SQ RIR's resulting from Completion / Workover operations in QUEST.</li><li>Prepares Management of Change to Completion / Workover programs.</li><li>Forecasts and plans medium and long term needs to meet program requirements.</li><li>Anticipates operational changes and needs and revises plan accordingly.</li><li>Participates in Daily Operations Meetings.</li><li>QA/QC of data in Daily Report.</li><li>Monitors daily progress against plan.</li><li>Monitors actual costs Vs AFE.</li><li>Record and monitor operational NPT trends.</li><li>Evaluates results Vs goals and performance of service companies.</li><li>Initiates engineering corrective action to ensure a process of continuous improvement.</li><li>Performs engineering studies to solve recurring problems (completion hardware problems, etc.).</li></ul>15+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law. _x000D_ Apply Now Share_x000D_<p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Provide independent construction through handover oversight to protect SF interests during execution.</p></li><li><p>Represents the SF manager on site and within EPCC execution, ensuring safety, quality, readiness to ensure EPCC single point delivery responsibility.</p></li><li><p>Monitor EPCC construction progress and quality</p></li><li><p>Identify execution risks, sequencing issues, and bottlenecks</p></li><li><p>Track punch lists, system completion, and handover readiness</p></li><li><p>Provide early warning on construction-driven schedule or cost risk</p></li><li><p>Review construction methods, temporary works, and interfaces</p></li><li><p>Support commissioning readiness and turnover logic</p></li><li><p>Handover assets to client to obtain well connection certificates.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Holds a bachelor's degree in civil engineering</p></li><li><p>15+ years of oil &amp; gas construction experience</p></li><li><p>Strong background in onshore facilities execution phases and transitions</p></li><li><p>Experience with QA/QC systems and punch management</p></li><li><p>Confident proactive engagement in the field - able to interpret situations and problems not just relying on reports.</p></li><li><p>Confident proactive engagement in the field able to interpret situations and problems not just relying on reports.</p></li><li><p>Kuwait based / Transferable visa</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. JOB DETAILS Direct Report Project HSE Manager Operational Scope Civil Works | Drilling &amp; Completions | Work Over | Facilities | Production Supervises Mechanical Lifting contractors; Drilling Rig Lifting Crews; any Contractor performing Mechanical Lifting activities under SLB operational control; site level DROPS auditors and HSE Specialists in their execution of the DROPS Program</p><p>2. ROLE PURPOSE The Mechanical Lifting &amp; DROPS Subject Matter Expert Lead is the SLB Mutriba Project authority for the safe design, planning, execution, and continuous improvement of Mechanical Lifting and Dropped Objects Prevention (DROPS) activities across the Mutriba Field Development Project. The role combines planning and operational SME oversight of lifting operations with assurance of the Project's DROPS system implementation, ensuring full compliance with SLB standards, client requirements, and applicable regulatory frameworks across all project phases and contractor interfaces.</p><p>3. KEY RESPONSIBILITIES</p><p>Mechanical Lifting SME</p><ul><li>Lead the planning, preparation, implementation, monitoring, and review of Mechanical Lifting Plans (MLPs) for all project phases, including all prevention and mitigation measures.</li><li>Review and validate all critical lifting plans prepared by SLB and Contractors, categorize lifts in accordance with the Lift Categorization Questionnaire, and submit Critical and Non-Routine lifts to the right channels.</li><li>Personally supervise the execution of Non-Routine, Critical, and Complex lifts across all project locations, such as Rig Mobilization, Initial Rig Moves, Skidding operations and de-mobilization.</li><li>Ensure all lifting risk assessments (HARC/JSA) are prepared, reviewed, and adequate prior to the commencement of any lifting operation.</li><li>Assess Pre-Job Safety Meetings (PJSMs) related to mechanical lifting operations and verify that controls identified in the MLP and HARC are communicated and understood by all participants.</li><li>Advise and stop lifting operations during adverse weather conditions (lightning, high-wind events) and verify suspension and resumption criteria are clearly defined and enforced at site level.</li><li>Establish, maintain, and audit all Project Lifting Equipment Registers across all rig sites and call-out services, ensuring all lifting appliances and accessories are inspected, certified, color-coded, and fit for purpose.</li><li>Verify that third-party lifting equipment introduced to SLB managed sites holds valid certification from an LEEAaccredited or equivalent body, aligned with applicable standards.</li><li>Ensure adequate storage and in-service maintenance of all lifting gear and accessories in accordance with Project and client s requirements.</li><li>Drive compliance with SLB's Mechanical Lifting Standard (SLB-HSE-S013) and Mechanical Lifting B.O.O.K. (SLB-HSE-M013) across all contractor interfaces.</li><li>Conduct frequent, structured audits of all ML activities and equipment at rig sites and call-out service locations, documenting findings and tracking corrective actions closure.</li><li>Perform ML related assessments for the Annual Audit and Inspection Plan (AAIP) to verify ongoing compliance with SLB standards, client procedures, and regulatory requirements.</li><li>Report all lifting-related events in QUEST (SLB incident management system) in a timely manner, ensuring accuracy of classification, causal analysis, and corrective/preventive action assignment.</li><li>Lead or actively participate in investigations of any incident, near miss, or high-potential event related to mechanical lifting operations.</li><li>Coach, assess, and verify the competence of personnel involved in ML operations such as Lifting Supervisors, Crane Operators, Banksmen, and Riggers, against defined competency frameworks.</li><li>Maintain competency assessment records and ensure training validity periods are tracked and renewed.</li><li>Deliver or coordinate delivery of ML awareness and technical training as required by project needs.</li><li>Serve as primary interface with customer s Lifting Authority for ML plans, approvals, and regulatory compliance.</li></ul><p>DROPS Authority</p><ul><li>Project-level DROPS Program Assurance Lead for integrity, consistency, and effectiveness of the DROPS prevention program across all Mutriba Project locations.</li><li>Review, evaluate, and formally validate DROPS Inspection Reports submitted by rig sites and service locations, verifying accuracy on findings, classification, and effectiveness and closure of corrective actions.</li><li>Validate the correct implementation of DROPS, including DROPS Zone identification, zoning maps, barrier deployment, DROPS Picture Books, tethered tool program, and related.</li><li>Conduct structured DROPS Program audits across all active project phases and locations, assessing compliance with SLB-HSE-S023 (DROPS Standard) and the DROPS B.O.O.K. (SLB-HSE-M023).</li><li>Verify DROPS inspection checklists for rig-ups, and the maintenance of DROPS Inspection Schedules.</li><li>Support site-level HSE Supervisors in identifying dropped object and Work at Height hazards.</li><li>Ensure DROPS incidents are reported, classified, and investigated in accordance with project and SLB requirements, and lessons-learned dissemination across the project.</li><li>Maintain and monitor DROPS program performance metrics; escalate systemic non-conformances.</li></ul><p>Additional Responsibilities</p><ul><li>Participate in Project HAZOP/HARC processes as the ML and DROPS SME for ML scenarios under review.</li><li>Support development and review of project HSE Plans, procedures, and standards related to ML and DROPS.</li><li>Contribute to pre-mobilization readiness reviews as the ML/DROPS technical authority.</li><li>Support emergency response planning for lifting-related scenarios (crane collapse, load drop, manriding rescue) and verify that adequate rescue plans are in place.</li><li>Assist developing the Annual Audit and Inspection Plan (AAIP) for ML and DROPS activities.</li></ul><p>4. AUTHORITY</p><ul><li>Authority to Stop Work on any mechanical lifting or related activity that does not comply with approved lift plans, SLB standards, or client requirements.</li><li>Authority to reject and require re-submission of non-compliant lift plan with SLB or client requirements.</li><li>Authority to require the removal of lifting equipment or accessory found defective, uncertified, or non-compliant.</li><li>Authority to withhold validation for any site or location non-compliant with DROPS system requirements.</li><li>Authority to escalate non-conformances to Contractor and Project Management</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in engineering or Technical Career</li><li>Professional Certification: LEEA Appointed Person for Lifting Operations or similar.</li><li>Third-party certification credited by LEEA or NSL.</li><li>DROPS Level 3 Focal Point.</li><li>Minimum 10 years of experience in a dedicated Mechanical Lifting supervisory or SME capacity, preferably on the Oil &amp; Gas Industry.</li><li>Demonstrated experience operating in multi-contractor onshore drilling environments, including direct supervision of crane, rigging, and lifting appliance crews.</li><li>Prior experience conducting DROPS program audits and managing DROPS systems at rig or field level</li><li>Fluent English mandatory. Arabic is an advantage.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Oversee and manage the day-to-day cybersecurity operations for a specific client or project, acting as their primary technical point of contact.</p></li><li><p>Implement and maintain robust security controls, including firewalls, intrusion detection/prevention systems, and endpoint security solutions, tailored to the client's environment.</p></li><li><p>Conduct regular vulnerability assessments and penetration testing to identify and remediate security weaknesses before they can be exploited.</p></li><li><p>Develop and execute incident response plans, leading the charge in investigating, containing, and eradicating security breaches.</p><p>Hands-on expertise in monitoring and managing security devices, including: Firewalls Web Application Firewalls (WAF) Load Balancers Security event monitoring and incident response Security policy management and troubleshooting</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Computer Science, Cybersecurity, Information Technology, or a related field; Master's preferred.</p></li><li><p>Minimum of 5-7 years of progressive experience in cybersecurity roles, with a focus on operational security and client-facing responsibilities.</p><br></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision, plans sourcing of goods and services to support manufacturing, field operations or project management. Complies with and executes Category Management strategy in accordance with policies and procedures. Creates request for quotations (RFQ) or organizes competitive biddings from various suppliers to obtain best quality, delivery and price for goods and services (RFI-request for information/RFP-request for proposal). Implement agreements for local procurement of goods and services not covered under Category Management. Assesses supplier performance and conducts reviews with suppliers. May be responsible for complex operations or large expenditures. May lead in the development of less experienced Procurement Specialists. Job tasks impact cost containment, efficiency, profitability or operations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Undergraduate degree and minimum of 5 years of experience in Oil &amp; Gas industry, includng in a service company</li><li>Advanced procurement certification is preferred.</li></ul><p></p></section>

<p>Execute brand strategy and tactics in field, sales performance, effectively manage assigned territory and targeted accounts, build strong customer relationships and customer needs solving capability to maximize short and long term sales performance placing the patient into the center of any efforts and operating within AbbVie s business code of conduct, policies and all applicable laws and regulations.</p><p><b>Responsibilities:</b></p><ul><li>Deliver sales performance, brand KPIs, financial targets, marketing objectives, etc. in order to meet or exceed on those objectives.</li><li>Create pre-call plan using SMART objectives and execute post-call evaluation in order to continuously improve sales performance.</li><li>Effectively handle objections, misunderstandings, concerns and consistently gain logical and reasonable calls to action in order to close on every sales call.</li><li>Proactively and continuously aspire to serve customer needs, customer expectations and challenges in order to build trusted customer relationships and to achieve win-win agreements between AbbVie and customers.</li><li>Develop and execute a call plan that achieves set call metrics and optimizes coverage and frequency to key customers in order to maximize access and sales opportunities.</li><li>Continuously build understanding on customer needs and expectations, territory market landscape, competitors, market segments/dynamics, accounts, disease, product, clinical and sales expertise and share this market intelligence information with in-field team, brand team and sales manager to achieve alignment, to anticipate environmental changes and challenges and to optimize brand strategy and its execution.</li><li>Differentiate AbbVie s value proposition with health providers assigned and identify, develop and maintain disease state experts and speakers/advocates in order to maximize brand performance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in pharmaceutical studies.</li><li>2 years+ experience as a Product Specialist</li><li>Relevant industry experience, ideally in biotechnology and/or pharmaceuticals with speciality and/or Immunology Therapy area Experience</li><li>Fluency in English and Arabic</li><li>Excellent communication and presentation skills</li><li>Practical knowledge and understanding of HCPs and disease area requirements</li><li>Good understanding of the market challenges and opportunities</li><li>Great sense of ethics and integrity</li><li>Teamwork Capabilities</li><li>Curiosity and ability to learn and improve.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Participates in the preparation of the Contract Baseline Schedule and/or Revised Schedules in co-ordination with the Sr. Planner.</p></li><li><p>Prepares the regular schedule updates, progress update monitoring sheets for the various project phases and disciplines to allow performing periodic project schedule updates.</p></li><li><p>Prepares &amp; Updates periodically the “Progress Performance Curves” &amp; “Key Performance Indicators” in coordination with the Sr. Planner to monitor the project performance.</p></li><li><p>Highlights to the project management about any deviation in the plan -“out of sequence”- and be able to implement the required corrective actions.</p></li><li><p>Liaises and assists the Sr. Planner in preparing weekly, monthly reports, budget preparation and maintains proper project planning records.</p></li><li><p>Performs any other related duties as assigned.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>University degree in Engineering.</p></li><li><p>5 years relevant experience.</p></li><li><p>Experience in EPC Projects with ADNOC (or equivalent) is highly preferable. Involvement in Engineering &amp; Procurement is essential.</p></li><li><p>Previous employment with leading EPC contractors is highly preferable.</p></li><li><p>Capability to perform under stressful situations.</p></li><li><p>Engineering, Procurement experience &amp; Strong experience in Construction Phase</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Participates in the preparation of the Contract Baseline Schedule and/or Revised Schedules in co-ordination with the Sr. Planner.</p></li><li><p>Prepares the regular schedule updates, progress update monitoring sheets for the various project phases and disciplines to allow performing periodic project schedule updates.</p></li><li><p>Prepares &amp; Updates periodically the “Progress Performance Curves” &amp; “Key Performance Indicators” in coordination with the Sr. Planner to monitor the project performance.</p></li><li><p>Highlights to the project management about any deviation in the plan -“out of sequence”- and be able to implement the required corrective actions.</p></li><li><p>Liaises and assists the Sr. Planner in preparing weekly, monthly reports, budget preparation and maintains proper project planning records.</p></li><li><p>Performs any other related duties as assigned.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>University degree in Engineering.</p></li><li><p>5 years relevant experience.</p></li><li><p>Experience in EPC Projects with ADNOC (or equivalent) is highly preferable. Involvement in Engineering &amp; Procurement is essential.</p></li><li><p>Previous employment with leading EPC contractors is highly preferable.</p></li><li><p>Capability to perform under stressful situations.</p></li><li><p>Engineering &amp; Procurement experience.</p></li></ul><br><p><strong>Note: </strong>Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Candidate should have experience in the field of Information &amp; Technology Expertise in the field of Networks. Major work responsibilities like Installing, Configuring, and Troubleshooting and Designing of LAN, WAN, WLAN, ASA, Cisco CUCM, Palo alto and Fortigate firewalls.<br></p><ul><li><p>Handling of Cisco switches.</p></li><li><p>Handle Layer 2 connectivity between LAN &amp; WAN branches Along with point-to-point link and point to multi point link and implement required security.</p></li><li><p>Upgrading of IOS of network devices.</p></li><li><p>Handling of proxy Engine along with Content filtering.</p></li><li><p>Monitoring and shaping of Internet bandwidth.</p></li><li><p>Handling Access Control to all network devices using Tacacs+ services.</p></li><li><p>Analyze &amp; Research on New Network Products for Ministry.</p></li><li><p>Analyze all Operational &amp; Network related Jobs at Ministry.</p></li><li><p>Daily troubleshooting for LAN and WAN problems.</p></li><li><p>Configuring &amp; troubleshooting for LAN, WAN, and Firewalls (NGFW).</p></li><li><p>Configuring &amp; troubleshooting the Load balancer.</p></li><li><p>Configuring &amp; troubleshooting Infoblox.</p></li><li><p>Configuring &amp; troubleshooting Arbor.</p></li><li><p>Troubleshooting Network and Security infrastructure.</p></li><li><p>Installation and configuration of Routers, switches, and wireless LAN.</p></li><li><p>Hands-on experience in NAC solutions</p></li><li><p>Preventive maintenance report for in-house devices.</p></li><li><p>Troubleshooting and resolving Tickets.</p></li><li><p>Deployment and Configuration of UTM appliances</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Candidate Must have University Degree in Computer science or engineering or equivalent</p></li><li><p>Candidate Must have Cisco Certified Internetwork Expert, Lab (CCIE) Security</p></li><li><p>Candidate Must have Cisco Certified Internetwork Expert, Lab (CCIE) Routing &amp; Switching</p></li><li><p>Candidate Must have Palo Alto Network Certified Network Security Engineer (PCNSE)</p></li><li><p>Candidate Must have Fortinet Network Security Expert (NSE-1)</p></li><li><p>Candidate Must have Fortinet Network Security Expert (NSE-2)</p></li><li><p>Candidate Must have Fortinet Network Security Expert (NSE-3)</p></li><li><p>Candidate Must have Cisco Certified voice professional (CCVP/CCNP Voice)</p></li><li><p>Candidate Must have Cisco Certified Network Associates Voice (CCNA Voice)</p></li><li><p>Candidate Must have Cisco Certified Network Associates (CCNA R&amp;S)</p></li><li><p>Candidate Must have Microsoft Certified Systems Engineer (MCSE)</p><br></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Company Description</strong> <p>SAMSUNG E&amp;A is a specialized EPC company that provides comprehensive solutions across all areas of the plant industry. With strong pride for our pioneering role in the history of the Korean plant industry in the past 50 years, we successfully performed numerous projects around the world and grew into a globally competitive engineering company. We continuously expand our business across the engineering industry including Oil and Gas processing, Refinery, Petrochemical, Energy Transition, Environmental, Industrial and BIO areas. Based on our extensive experience, accumulated technologies and talented resources, we provide various services from the feasibility studies to engineering, procurement, construction, commissioning and O&amp;M.</p><p>We are looking for candidates who embody creativity, commitment, and collaboration—professionals who thrive in an innovative environment, are dedicated to excellence, and excel in teamwork.&nbsp;</p><p>Join us and be part of a dynamic team where ideas are valued, and collective success drives our future.</p> <strong>Job Description</strong> <p><strong>Job Summary</strong></p><ul><li>Performs skillful accounting works involving compilation, consolidation, and analysis of financial data.</li><li>May include any or all of the following: ledgers and preparation of journal entries, fixed asset or inventory accounting, preparation of trial balance or financial statements, cost accounting, bank account reconciliation.</li></ul><p><strong>Roles and Responsibilities</strong></p><ul><li>Provide technical guidance and assistance in the training of clerks and assistants.</li><li>Check correctness and completeness of payment vouchers.</li><li>Record accounting transactions.</li><li>Maintain ledger, statement, and accounts within established procedures at site office.</li><li>Maintain and keeps record of invoice and voucher.</li><li>Process related documents.</li><li>Apply accounting techniques and standard practices to the classification and recording of financial transactions.</li><li>Specify job content that vary from preparing journal entries and checking supporting entries, to carrying out well-defined steps in cost accounting analysis.</li><li>Match vendor invoices with purchase orders and provisions of feedback to procurement if no purchase order in the system</li><li>Match subcontractor invoices with commitments and provision of feedback to contract administration and check if there is no commitment in the system</li><li>Verify expense reports on a sample basis to ensure controls are adequate, supporting documentation is provided, and expense reports are legitimate business expenses</li><li>Manage cash &amp; budget and prepare overall monthly fund request for site admin.</li><li>Payroll operation - supervise, check &nbsp;&amp; suggest improvements on payroll related transactions such monthly payroll, leave salaries &amp; full &amp; final settlement.</li><li>Report monthly &amp; monitoring - prepare and analyze monthly site expense report.</li><li>Monitor GL open accounts such as payables, advance Payment, receivables, deposits, suspense and monitor controllable expenses such conference meals, team building meals, entertainment &amp; events for Site Admin.</li><li>Prepare annual depreciation and depletion tax schedules.</li><li>Perform account analysis to ensure entries and balances are correct.</li><li>Provide ad-hoc analysis and summaries of information as requested.</li><li>Perform general or cost accounting activities requiring some insight and depth of understanding.</li></ul> <strong>Qualifications</strong> <p><strong>Experience</strong></p><ul><li>10 to 15 years of relevant experience</li><li>Accounting experience and a intermediate understanding of accounting techniques</li></ul><p><strong>Knowledge or Certification</strong></p><ul><li>Knowledge of accounting principles, cycle &amp; environment, regulations and procedures</li><li>Knowledge in wide range of operations like Finance &amp; accounting Management, Budgeting &amp; Variance Analysis, Finalization of Accounts &amp; Reporting.</li><li>Be able to interpret Financial Transactions &amp; Financial Statement</li><li>Knowledge in Cash Management &amp; Budgeting.</li><li>Knowledge in Payroll operations</li><li>Skills to deal with SAP</li><li>Overall understanding of administration Dept. jobs in Gas / Petrochemical EPC Plant industry</li><li>Proficient in Microsoft Word, Excel, PowerPoint</li><li>Management accounting &amp; Auditing</li></ul><p><strong>Technical and Behavioral Competency</strong></p><ul><li>Proficiency in accounting software such as QuickBooks, Xero, or SAP.</li><li>Knowledge of accounting principles and financial regulations.</li><li>Ability to prepare financial statements, including balance sheets, income statements, and cash flow statements.</li><li>Familiarity with tax laws and regulations.</li><li>Understanding of bookkeeping practices, including accounts payable and receivable.</li><li>Strong Excel skills, including knowledge of advanced functions such as VLOOKUP and PivotTables.</li><li>Attention to detail and accuracy.</li><li>Dependability and punctuality</li><li>Excellent organizational and time management skills.</li><li>Ability to work independently and as part of a team.</li><li>Integrity and ethical behavior.</li><li>Initiative and proactive attitude.</li></ul> <strong>Additional Information</strong> <p><strong>Benefits include</strong></p><ul><li>Accommodation</li><li>Transportation</li><li>Annual Leave Ticket</li><li>Medical Insurance</li></ul><p><strong>Disclaimer:</strong> Samsung E&amp;A does not require job seekers to pay any fees, charges, or security deposits at any stage of the recruitment process. We have not authorized any individuals, agencies, or firms to collect payments on our behalf. If you're applying for a job with us, be aware that employment opportunities will never involve payment.</p><p><br>Be cautious of scams and do not trust anyone claiming to represent Samsung E&amp;A who demands payment in exchange for employment opportunities.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design and develop instrumentation systems and solutions tailored to specific industrial processes, ensuring optimal functionality and efficiency.</li><li>Conduct rigorous testing and calibration of instruments to guarantee accuracy and reliability in measurement and control applications.</li><li>Collaborate with multidisciplinary teams to integrate instrumentation with existing systems, ensuring seamless operation and compliance with industry standards.</li><li>Analyze and troubleshoot instrumentation issues promptly, employing diagnostic tools to minimize downtime and maintain operational integrity.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Instrumentation Engineering, Electrical Engineering, or a related field, ensuring a solid technical foundation.</li><li>A minimum of 3 years of hands-on experience in instrumentation within manufacturing, oil and gas, or similar industries.</li><li>Professional certifications such as Certified Automation Professional (CAP) or equivalent, demonstrating commitment to industry standards.</li><li>Familiarity with industry-specific standards like ISA, IEC, or API, which are crucial for compliance and best practices.</li></ul><p></p></section>