وظائف هندسة اتصالات - محافظة العاصمة (الكويت) الكويت

<p>The SOC Engineer is responsible for the design, implementation, configuration, and continuous optimization of ZainTECH's Security Operations Centre (SOC) technology platforms, ensuring secure, scalable, and resilient security monitoring services for enterprise and government customers across the MENA region. This is a hands-on engineering role focused on designing and maintaining Security Information and Event Management (SIEM), Security Orchestration, Automation and Response (SOAR), and supporting security technologies. The role owns the end-to-end lifecycle of security monitoring capabilities - from onboarding new log sources and developing detection content to automating operational workflows and continuously enhancing SOC performance - while ensuring solutions align with customer requirements, cybersecurity best practices, and operational standards. Responsibilities: SIEM &amp; Security Platform Engineering Design, implement, configure, and maintain enterprise SIEM and SOAR platforms supporting ZainTECH's Managed Security Services portfolio. Deploy and maintain highly available, scalable, and secure SOC infrastructure across customer environments. Manage platform upgrades, patching, configuration management, and lifecycle activities to ensure platform stability and performance. Ensure SOC technologies remain aligned with operational, security, and customer requirements. Detection Engineering &amp; Security Content Develop, maintain, and optimise SIEM detection content, including correlation rules, dashboards, reports, alerts, watchlists, and use cases. Improve detection capabilities by analysing emerging threats, attack techniques, and operational trends. Reduce false positives through continuous tuning and refinement of detection logic. Map detection capabilities to recognised cybersecurity frameworks such as MITRE ATT&amp;CK. Platform Integration &amp; Automation Integrate security technologies, cloud platforms, infrastructure, and third-party solutions into the SIEM ecosystem. Develop custom parsers, connectors, and data ingestion mechanisms to support new customer environments. Design and implement SOAR playbooks to automate investigation, enrichment, notification, and response activities. Optimise data collection, normalisation, and event processing to improve operational efficiency. Operational Support &amp; Continuous Improvement Provide technical support to SOC Analysts during security investigations and major incident response activities. Troubleshoot platform issues and perform root cause analysis to maintain service availability. Produce technical documentation, implementation guides, and operational runbooks. Identify opportunities to improve SOC maturity through automation, process optimisation, and engineering best practices. Collaborate with Cybersecurity Consulting, Incident Response, Product Management, and Delivery teams to continuously enhance Managed Security Services.</p><p><strong>Desired Candidate Profile</strong></p><p>3-5 years of hands-on experience designing, implementing, and administering SIEM platforms within enterprise or Managed Security Services environments. Strong experience with one or more SIEM platforms such as Microsoft Sentinel, Splunk Enterprise Security, IBM QRadar, ArcSight, LogRhythm, or Elastic Security. Experience integrating multiple security technologies, including EDR, firewalls, IDS/IPS, cloud security platforms, identity platforms, and threat intelligence feeds. Working knowledge of Windows, Linux, networking, scripting, APIs, and automation technologies. Experience implementing SOAR platforms and security automation workflows. Knowledge of MITRE ATT&amp;CK, threat intelligence integration, and detection engineering principles. Experience supporting enterprise cloud environments including Microsoft Azure, AWS, or Google Cloud Platform. Experience working within a Managed Security Services Provider (MSSP) environment. Bachelor s degree in Cybersecurity, Information Security, Computer Science, Information Technology, Engineering, or a related field. Security +, CEH or any relevant certification preferred</p>

<p>Urgent Hiring – Project Engineer | Kuwait Engineers India Limited (EIL) is hiring experienced professionals for a client project based in Kuwait. • Location: Client Site, Kuwait Key Responsibilities: • Coordinate engineering and construction activities. • Monitor project progress, schedules, and deliverables. • Liaise with clients, contractors, and multidisciplinary teams. • Ensure compliance with project specifications, quality, HSE, and client requirements. • Prepare and review technical documentation and project reports. • Support project planning, execution, and close-out activities. Preferred Skills: • Strong project coordination and communication skills. • Knowledge of engineering standards and project management practices. • Ability to work in a multidisciplinary team environment. • Proficiency in MS Office and project documentation. Employment Type: • Client Site Deployment (Kuwait)</p><p> • Minimum 10 years of relevant experience • Educational background in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering Experience: • Minimum 10 years of relevant experience in engineering projects. • Experience in project execution, coordination, construction, or maintenance is preferred. Educational Qualification: • Bachelor's Degree in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering. Preferred Industry: • Oil & Gas / Petrochemical / Refinery / EPC / Industrial Projects</p>

<p>We are seeking a knowledgeable and proactive Environmental Engineer to ensure that all marine construction, offshore, and infrastructure projects comply with environmental regulations and sustainability standards. The ideal candidate will be responsible for managing environmental impact assessments, monitoring programs, permitting, and providing technical guidance to project teams to minimize environmental risks. Key Responsibilities: • Develop, implement, and monitor Environmental Management Plans (EMP) and Construction Environmental Management Plans (CEMP) for marine and offshore projects • Conduct Environmental Impact Assessments (EIA) for project activities, identifying potential environmental impacts and developing mitigation measures • Ensure all project activities comply with local environmental laws, regulations (e.g., Ministry of Environment, EPA), and international standards (ISO 14001:2015) • Coordinate with regulatory authorities for environmental permits, licenses, and approvals including Consent to Operate (CTO) • Monitor and manage the impact of marine construction activities on ecosystems including coral reefs, mangroves, and marine fauna • Conduct water and sediment quality testing before, during, and after marine construction • Oversee waste management generated from marine construction projects including hazardous and non-hazardous waste • Participate in Environmental Risk Assessment workshops (ENVID) and maintain the Environmental Risk Register (ERR) • Review and endorse environmental studies including baseline surveys, modeling studies, and assessment reports • Provide technical environmental support across design, fabrication, construction, installation, and commissioning phases • Monitor contractor compliance with environmental requirements through audits, inspections, and performance reviews • Track and report environmental performance data including air emissions, water quality, waste management, and greenhouse gases • Develop and review key environmental plans including Waste Management Plans (WMP) and Oil Spill Response Plans • Liaise with clients, subcontractors, and regulatory bodies on environmental matters • Provide environmental training and awareness to project teams and contractors • Stay updated on environmental regulations and industry best practices</p><p>Qualifications & Experience: • Bachelor’s degree in Environmental Engineering, Chemical Engineering, Environmental Science, or related field • Minimum 5-8 years of experience in environmental engineering within marine construction, offshore, or oil & gas industries • Experience with offshore greenfield and brownfield projects is highly preferred • Strong knowledge of environmental regulations, permitting processes, and compliance requirements in the GCC region or relevant jurisdiction • Experience in Environmental Impact Assessment (EIA) across project lifecycles • Familiarity with ISO 14001:2015 environmental management standards • Proficiency in environmental monitoring and reporting tools • Valid offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., IEMA, IAIA) is an advantage • Postgraduate degree in Environmental Engineering is preferred Required Skills: • Strong knowledge of environmental laws, regulations, and industry standards • Experience in environmental permitting and regulatory liaison • Understanding of marine and coastal ecosystems and environmental impact mitigation • Excellent analytical and problem-solving abilities • Strong communication and report writing skills • Ability to work independently and manage multiple priorities • Attention to detail for compliance and documentation • Team collboration with project, engineering, and HSE teams</p>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

<p>Urgent Hiring – Project Engineer | Kuwait Engineers India Limited (EIL) is hiring experienced professionals for a client project based in Kuwait. • Location: Client Site, Kuwait Key Responsibilities: • Coordinate engineering and construction activities. • Monitor project progress, schedules, and deliverables. • Liaise with clients, contractors, and multidisciplinary teams. • Ensure compliance with project specifications, quality, HSE, and client requirements. • Prepare and review technical documentation and project reports. • Support project planning, execution, and close-out activities. Preferred Skills: • Strong project coordination and communication skills. • Knowledge of engineering standards and project management practices. • Ability to work in a multidisciplinary team environment. • Proficiency in MS Office and project documentation. Employment Type: • Client Site Deployment (Kuwait)</p><p> • Minimum 10 years of relevant experience • Educational background in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering Experience: • Minimum 10 years of relevant experience in engineering projects. • Experience in project execution, coordination, construction, or maintenance is preferred. Educational Qualification: • Bachelor's Degree in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering. Preferred Industry: • Oil & Gas / Petrochemical / Refinery / EPC / Industrial Projects</p>

<p>About the Role: We are seeking a competent Site Engineer specializing in civil pipeline works for marine GRP (Glass Reinforced Plastic) pipe installations. The ideal candidate will be responsible for supervising the installation, testing, and commissioning of GRP pipelines in marine and offshore environments, ensuring compliance with project specifications, international standards, and safety requirements. Key Responsibilities: • Supervise and coordinate daily pipeline installation activities including trenching, pipe laying, jointing, lamination, and backfilling for marine GRP pipelines • Ensure all GRP pipe installation works comply with approved drawings, method statements, specifications, and international standards (ISO 14692, AWWA M45) • Monitor trench excavation, dewatering, pipe bedding, and backfilling operations in accordance with project requirements • Supervise GRP pipe jointing and lamination procedures including adhesive bonding, coupling installation, and flange bolting • Coordinate with survey teams for pipeline route alignment, setting out, and as-built verification • Conduct site inspections and quality checks to verify adherence to specifications, safety regulations, and environmental standards • Review and interpret isometric drawings, spool drawings, and pipeline alignment sheets • Prepare and submit inspection requests (RFIs), method statements, and risk assessments • Monitor material deliveries including GRP pipes, fittings, couplings, and consumables; ensure proper handling and storage • Liaise with clients, consultants, subcontractors, and QAQC teams for inspections and approvals • Maintain accurate daily records including progress reports, manpower, equipment usage, and material consumption • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Assist in pre-commissioning and commissioning activities including hydrotesting, flushing, and pressure testing • Prepare test packs and maintain documentation for pipeline testing and handover • Report delays, technical issues, or incidents to the Project Manager or Construction Manager • Provide technical guidance to site supervisors, foremen, and pipeline installation crews</p><p>Qualifications & Experience: Bachelor's degree in Civil Engineering, Mechanical Engineering, or related field Minimum 5+ years of experience in pipeline installation, with specific experience in GRP/FRP piping for marine or offshore projects Strong knowledge of GRP pipe materials, jointing methods (adhesive bonded, coupling), and lamination procedures Familiarity with international standards including ISO 14692 (GRP piping for offshore applications) and AWWA M45 • Experience with marine pipeline installation methods including trenching, floating installation, or underwater pull-in • Proficiency in MS Office, AutoCAD, and project management software • Knowledge of hydrotesting, pressure testing, and pipeline commissioning procedures • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus Required Skills: • Strong technical knowledge of GRP pipeline installation in marine environments • Excellent supervision and coordination abilities • Attention to detail for quality and compliance • Good communication and report writing skills • Problem-solving for site and technical issues • Ability to work under pressure and meet project deadlines • Team collaboration with site staff, subcontractors, and management</p>

<p>We are seeking a knowledgeable and proactive Environmental Engineer to ensure that all marine construction, offshore, and infrastructure projects comply with environmental regulations and sustainability standards. The ideal candidate will be responsible for managing environmental impact assessments, monitoring programs, permitting, and providing technical guidance to project teams to minimize environmental risks. Key Responsibilities: • Develop, implement, and monitor Environmental Management Plans (EMP) and Construction Environmental Management Plans (CEMP) for marine and offshore projects • Conduct Environmental Impact Assessments (EIA) for project activities, identifying potential environmental impacts and developing mitigation measures • Ensure all project activities comply with local environmental laws, regulations (e.g., Ministry of Environment, EPA), and international standards (ISO 14001:2015) • Coordinate with regulatory authorities for environmental permits, licenses, and approvals including Consent to Operate (CTO) • Monitor and manage the impact of marine construction activities on ecosystems including coral reefs, mangroves, and marine fauna • Conduct water and sediment quality testing before, during, and after marine construction • Oversee waste management generated from marine construction projects including hazardous and non-hazardous waste • Participate in Environmental Risk Assessment workshops (ENVID) and maintain the Environmental Risk Register (ERR) • Review and endorse environmental studies including baseline surveys, modeling studies, and assessment reports • Provide technical environmental support across design, fabrication, construction, installation, and commissioning phases • Monitor contractor compliance with environmental requirements through audits, inspections, and performance reviews • Track and report environmental performance data including air emissions, water quality, waste management, and greenhouse gases • Develop and review key environmental plans including Waste Management Plans (WMP) and Oil Spill Response Plans • Liaise with clients, subcontractors, and regulatory bodies on environmental matters • Provide environmental training and awareness to project teams and contractors • Stay updated on environmental regulations and industry best practices</p><p>Qualifications & Experience: • Bachelor’s degree in Environmental Engineering, Chemical Engineering, Environmental Science, or related field • Minimum 5-8 years of experience in environmental engineering within marine construction, offshore, or oil & gas industries • Experience with offshore greenfield and brownfield projects is highly preferred • Strong knowledge of environmental regulations, permitting processes, and compliance requirements in the GCC region or relevant jurisdiction • Experience in Environmental Impact Assessment (EIA) across project lifecycles • Familiarity with ISO 14001:2015 environmental management standards • Proficiency in environmental monitoring and reporting tools • Valid offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., IEMA, IAIA) is an advantage • Postgraduate degree in Environmental Engineering is preferred Required Skills: • Strong knowledge of environmental laws, regulations, and industry standards • Experience in environmental permitting and regulatory liaison • Understanding of marine and coastal ecosystems and environmental impact mitigation • Excellent analytical and problem-solving abilities • Strong communication and report writing skills • Ability to work independently and manage multiple priorities • Attention to detail for compliance and documentation • Team collboration with project, engineering, and HSE teams</p>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

<p>About the Role: We are seeking a competent Site Engineer specializing in civil pipeline works for marine GRP (Glass Reinforced Plastic) pipe installations. The ideal candidate will be responsible for supervising the installation, testing, and commissioning of GRP pipelines in marine and offshore environments, ensuring compliance with project specifications, international standards, and safety requirements. Key Responsibilities: • Supervise and coordinate daily pipeline installation activities including trenching, pipe laying, jointing, lamination, and backfilling for marine GRP pipelines • Ensure all GRP pipe installation works comply with approved drawings, method statements, specifications, and international standards (ISO 14692, AWWA M45) • Monitor trench excavation, dewatering, pipe bedding, and backfilling operations in accordance with project requirements • Supervise GRP pipe jointing and lamination procedures including adhesive bonding, coupling installation, and flange bolting • Coordinate with survey teams for pipeline route alignment, setting out, and as-built verification • Conduct site inspections and quality checks to verify adherence to specifications, safety regulations, and environmental standards • Review and interpret isometric drawings, spool drawings, and pipeline alignment sheets • Prepare and submit inspection requests (RFIs), method statements, and risk assessments • Monitor material deliveries including GRP pipes, fittings, couplings, and consumables; ensure proper handling and storage • Liaise with clients, consultants, subcontractors, and QAQC teams for inspections and approvals • Maintain accurate daily records including progress reports, manpower, equipment usage, and material consumption • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Assist in pre-commissioning and commissioning activities including hydrotesting, flushing, and pressure testing • Prepare test packs and maintain documentation for pipeline testing and handover • Report delays, technical issues, or incidents to the Project Manager or Construction Manager • Provide technical guidance to site supervisors, foremen, and pipeline installation crews</p><p>Qualifications & Experience: Bachelor's degree in Civil Engineering, Mechanical Engineering, or related field Minimum 5+ years of experience in pipeline installation, with specific experience in GRP/FRP piping for marine or offshore projects Strong knowledge of GRP pipe materials, jointing methods (adhesive bonded, coupling), and lamination procedures Familiarity with international standards including ISO 14692 (GRP piping for offshore applications) and AWWA M45 • Experience with marine pipeline installation methods including trenching, floating installation, or underwater pull-in • Proficiency in MS Office, AutoCAD, and project management software • Knowledge of hydrotesting, pressure testing, and pipeline commissioning procedures • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus Required Skills: • Strong technical knowledge of GRP pipeline installation in marine environments • Excellent supervision and coordination abilities • Attention to detail for quality and compliance • Good communication and report writing skills • Problem-solving for site and technical issues • Ability to work under pressure and meet project deadlines • Team collaboration with site staff, subcontractors, and management</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Safety Engineer with 10 Years experience in Construction / infrastructure development projects. Preferably experience in Airport, Highway, Roads etc. Must be well knowledge of safety measures in Gulf.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Engineering graduate with minimum 10 Years experience in infrastructure development construction. Good communication skill. Site management, training.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Walk-in for Civil Engineer with 10-12 years of experience in Oil &amp; Gas Industries. Minimum 3 years of experience in Middle East Oil &amp; Gas Construction Project is a must.</p></div></section>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><p>An Associate s degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field. Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards. I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years. Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems. Must have an Active Secret US Government Clearance. US Citizenship is required to obtain a Secret Clearance.</p>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for an HSE Engineer for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <ul> <li>Coordinate implementation of the KOC PMC safety policies, HSE management system, and project-specific HSE management plans as they apply to the project.</li> <li>Ensure that the site complies with the relevant HSE legislation and KOC HSE requirements.</li> <li>Develop and implement the project HSE management system.</li> <li>Develop and maintain statistical data for the project.</li> <li>Prepare reports as required for the HSEQ manager.</li> </ul> <h4>Responsibilities</h4> <ul> <li>Monitor the EPC contractor HSE management system and provide advice and assistance to EPC HSE managers to ensure consistent compliance and reduce risk to project employees and the environment.</li> <li>Ensure the EPC contractors develop, implement, and maintain a specific project risk management plan.</li> <li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented timely in accordance with KOC expectations.</li> <li>Provide advice and guidance to the EPC contractor management team on HSE issues through interpretation of KOC policies and statutory requirements.</li> <li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety and training programs to provide a basis for further health and safety activities and highlight trends for future action.</li> <li>Monitor compliance with all Kuwait legislative requirements including dissemination of information to PMC and EPC managers and employees regarding amendments or additions to requirements as they come into effect.</li> <li>Review EPC contractor safety management system and advise on required changes.</li> <li>Develop and maintain professional relationships with KOC, regulatory bodies, and EPC contractors to foster the professional image of KBR.</li> <li>Visit the project site regularly to ensure interest and awareness of HSE is maintained; conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken.</li> <li>Proactively visit site and, with the EPC contractor, implement safety measures to promote and ensure safe work practices.</li> <li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow-up on findings.</li> <li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing work to maintain a safe working environment.</li> <li>Assist EPC subcontractor safety advisors and site management in the development and revision of specific site safety programmes.</li> <li>Maintain an HS&E audit and assessment program for the location.</li> <li>Carry out regular inspections of work areas with the respective EPC contractor line manager and HSE representative and prepare reports.</li> <li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters, etc.</li> <li>Assist EPC contractor line management and construction supervisors in accident investigation processes and report accordingly.</li> <li>Develop and implement safety initiatives to continually improve, achieve, and maintain stated safety performance and objectives.</li> <li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors.</li> <li>Monitor the availability and use of safety apparel and equipment.</li> <li>Provide advice to EPC subcontractor supervision on the development of project-specific procedures and Job Safety Analysis (JSA) training.</li> <li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls.</li> <li>Ensure all lines of communication on HSE matters remain open and effective between all parties, particularly KOC, KBR, EPC contractors, and their subcontractors.</li> </ul> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor’s degree in engineering.</li> <li>Minimum 8 years total post-graduation experience.</li> <li>Minimum 5 years oil and gas post-graduation experience.</li> <li>Minimum 5 years’ experience in an HSE engineer role.</li> <li>Practical experience with HSE management systems, reporting, and audit procedures.</li> <li>Ability to develop, update, and maintain in-house procedures.</li> <li>Must be conversant with local and international safety standards and norms.</li> <li>Practical experience of design, construction, commissioning, and maintenance aspects of oil and gas installations.</li> <li>Decarbonization, energy transition, and sustainability knowledge.</li> </ul> <p><strong>Belong. Connect. Grow.</strong></p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role &amp; responsibilities</b> 1. Design Review and Enhancement: Evaluate and enhance mechanical designs to ensure compliance with industry standards and project requirements. Provide technical expertise in HVAC equipment design and selection, offering optimization and efficiency improvement suggestions. 2. Systems Knowledge: Possess in-depth knowledge of HVAC systems, fire-fighting pump selection, and understanding of LPG, water, and drainage systems. Demonstrate proficiency in selecting and integrating HVAC equipment into project designs. 3. Statutory Compliance: Stay abreast of and ensure compliance with local regulations and statutory requirements related to HVAC, LPG, water, and drainage systems. Advise project teams on regulatory considerations and necessary adjustments to maintain compliance. 5. Maintenance Expertise: Exhibit knowledge and experience in maintaining HVAC equipment, providing valuable insights for optimal performance and longevity. 6. Consultant and Contractor Collaboration: Have a comprehensive background working in consultancy, contributing to developing and refining project designs. Collaborate effectively with contractors, offering technical support and guidance during project implementation. 7 . Site Evaluation: Oversee site evaluations, providing instructions to on-site engineers and addressing any issues. Ensure that project specifications are met during the evaluation/supervision phase.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>4. Experience: Bring a wealth of experience exceeding 5 years in mechanical engineering, focusing on HVAC systems and related disciplines.</p><p>Bachelors degree in mechanical engineering. work experience in consultancy and contracting firms.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible to supervise all the activities at Substation as per Clients requirement, in concern to complying project task with quality and under required safety measures. To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HAVC works and to resolve arising site issues. Shall have good communication skill and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works. Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, materials requisition etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / Btech in Electrical Enigneering with minimum 7 years of experience. Shall have experience in installation of indoor Gas insulated Switchgear substation Projects with exposure of 132KV to 400 KV voltage level.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p> <p> </p> <p> <strong>Your Development Journey</strong> </p> <p>You ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: </p> <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience </li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training </li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients </li> </ul> <p> </p> <p> <strong>Your day-to-day could include: </strong> </p> <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives </li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs </li> <li>Analyse performance data and recommend improvements </li> <li>Manage equipment logistics and ensure seamless setup and operation at the rig site </li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams </li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance </li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently </li> </ul> <p> </p> <p> <strong>What We re Looking For</strong> </p> <ul> <li>Graduated with bachelor s degree in engineering (all fields) within the last 24 months </li> <li>No more than 1 year of experience </li> <li>English language fluent proficiency (written and spoken) </li> <li>Strong communication and interpersonal skills </li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions </li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore) </li> </ul> <p> </p> <p> <strong>What to Expect</strong> </p> <p>This role is physically and mentally demanding. You ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you re up for the challenge, the rewards are big. </p> <p>You ll join one of our specialized product lines, such as: </p> <ul> <li>Completions </li> <li>Drilling Services </li> <li>Wireline Services </li> <li>Artificial Lift </li> <li>Well Services </li> <li>Managed Pressure Drilling and many more </li> </ul> <p> </p> <p><br></p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including electrical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform electrical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for electrical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in electrical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, ETAB or similar).</p></li><li><p>Strong understanding of codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 12 years of experience in Electrical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based/Transferable Visa</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The suitable candidate should have a minimum of 12-15 years of relevant mechanical experience within the Oil &amp; Gas industry together with a minimum of 2-5 years' experience in the design and construction of onshore plants. The ideal candidate shall be familiar with industry standard codes and construction practises. Will perform liaison duties between Client and Contractor reporting to the Resident Engineer.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required</p><p>Candidate available immediately within Kuwait preferred</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Process Engineer shall monitor and check all Contractor requisitions, work packages, risk and method statements etc. to ensure optimized work processes. Witness and verify compliance with the design specification including oversight of construction and Commissioning to ensure QHSE standards are maintained. In addition he shall provide on the job training to his client counterpart. The suitable candidate should have minimum of 12 years of relevant process experience within the Oil &amp; Gas industry together with a minimum of 10 years' experience in the design and construction of onshore plants. The ideal candidate shall be familiar with industry standard codes and construction practices. Will perform liaison duties between client and Contractor.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required</p><p>Candidate available immediately within Kuwait preferred</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p><p>Experience in Operation, process and day to day activities in Raw Mill, Coal &amp; Kiln corrective measures to improve plant performance.</p></div></section>