وظائف ممرضات - الأحمدي الكويت

<ul><li>Provide immediate medical care and stabilization for injuries and illnesses occurring on the rig, ensuring rapid assessment and treatment.</li><li>Manage and maintain the medical supplies and equipment inventory, including medications, ensuring proper storage and functionality in a remote environment.</li><li>Conduct regular health assessments and screenings for all personnel, promoting proactive health management and early detection of potential issues.</li><li>Administer medications and treatments as prescribed by physicians or standing orders, adhering strictly to medical protocols and safety guidelines.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Possesses a valid Registered Nurse (RN) license or equivalent, demonstrating professional nursing qualifications.</li><li>Holds certifications in Advanced Cardiac Life Support (ACLS), and Basic Life Support (BLS) or CPR, showcasing proficiency in emergency medical care.</li><li>Requires a minimum of 3-5 years of experience in an industrial, offshore, or emergency medical setting, indicating relevant experience.</li><li>Experience in the oil and gas industry is highly preferred, demonstrating familiarity with the unique challenges of offshore environments.</li></ul>

<p>Under strict supervision, performs repairs, preventative maintenance, calibration, and inspections on down-hole tool electronics and other equipment used in the application for down-hole tools, including Directional/ RSS or M/LWD sensors. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Areas of specialization may include: mechanical aptitude, electronics aptitude, computer skills, assembly and disassembly of tools associated with PSL equipment, or Measure while drilling and/or Logging While Drilling down-hole tools.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Requires a technical school certificate, or equivalent.</li><li>An associate degree or higher is preferred.</li></ul><p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Bachelor's or Master's degree in Geology, Geophysics, Petroleum Engineering, or a related discipline.</p></li><li><p><strong>15+ years of experience</strong> in the Upstream Oil &amp; Gas industry.</p></li><li><p>The main responsibility of the Consultant is to work onsite at customers premises to support, enhance, and expand our digital solutions, system and platforms. Our practice requires resources with the experience needed to perform support, troubleshooting and enhancement of our Geoscience Solution for our permanent resource backfill for any vacation or leave. </p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>The main responsibility of the Consultant is to work onsite at customers premises to support, enhance, and expand our digital solutions, system and platforms. Our practice requires resources with the experience needed to perform support, troubleshooting and enhancement of our Geoscience Solution for our permanent resource backfill for any vacation or leave. </p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Candidates must have relevant experience in Substation and/or Overhead Transmission Line projects, either in India or internationally.</p></li><li><p>Develop and implement comprehensive safety programs tailored to Indian regulatory standards and workplace environments.</p></li><li><p>Conduct thorough hazard identification and risk assessments (HIRA) for all operational activities, focusing on potential Indian workplace hazards.</p></li><li><p>Investigate all accidents, near misses, and unsafe conditions, determining root causes and implementing corrective and preventive actions.</p></li><li><p>Ensure compliance with all relevant Indian safety legislation, including the Factories Act, and other applicable regulations.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Engineering (Mechanical, Chemical, Civil, Electrical) or equivalent.</p></li><li><p>The engineering college and the relevant discipline must be accredited by the National Board of Accreditation (NBA).</p></li><li><p>Possession of a relevant professional safety certification (e.g., NEBOSH IGC, IOSH, or Indian equivalent).</p></li><li><p>Minimum of 5 years of progressive experience in safety engineering within the Indian industrial sector.</p></li><li><p>Proven experience in implementing and managing OHSAS 18001/ISO 45001 management systems.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Oversee daily camp operations, ensuring all activities run smoothly and efficiently to maintain high standards of service.</li><li>Manage and coordinate accommodation logistics for staff and guests, ensuring comfort and safety at all times.</li><li>Supervise and train camp staff, fostering a collaborative team environment to enhance performance and morale.</li><li>Implement and uphold safety protocols and emergency procedures, prioritizing the well-being of all camp occupants.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p><ul><li><p>Minimum of 5 years of relevant experience in camp management or a similar role, demonstrating progressive responsibility.</p></li><li><p>Certifications in health and safety, food handling, or first aid are highly desirable to ensure compliance with regulations.</p></li><li><p>Experience in remote or offshore camp settings is advantageous, highlighting adaptability and resilience.</p></li></ul><p></p></section>

<ul><li><p>Prepare and review turnaround cost estimates. </p></li><li><p>Challenge assumptions, identify gaps, and drive cost optimization. </p></li><li><p>Benchmark costs against historical data and industry standards. </p></li><li><p>Monitor actual expenditure, commitments, accruals, and forecasts against approved budgets. Assess the cost impact of scope changes, add-ons, and deletions. </p></li><li><p>Prepare cost reports, dashboards, and management insights. </p></li><li><p>Identify potential overruns and recommend corrective actions. </p></li><li><p>Support continuous improvement of cost-control systems and practices in line with international best practices. </p></li><li><p>Maintain a strong focus on EH&S, compliance, safety, and environmental responsibility.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Engineering, Finance, or a related field </p></li><li><p> 5+ years of experience in cost estimation/cost control, preferably in turnarounds or maintenance projects in oil and gas or Petrochemical Industry </p></li><li><p> Strong analytical and reporting skills, particularly MS Excel </p></li><li><p> Strong hands-on experience with SAP </p></li><li><p> Strong commercial awareness, analytical thinking, and attention to detail</p></li></ul>

<ul><li>Safely operate heavy vehicles like trucks and buses within Kuwait's local road network, adhering strictly to traffic laws.</li><li>Execute timely and efficient local transfers of goods or personnel, ensuring delivery schedules are met without compromise.</li><li>Conduct thorough pre-trip and post-trip inspections of the vehicle, meticulously documenting any mechanical issues or required maintenance.</li><li>Securely load and unload cargo, utilizing appropriate equipment and techniques to prevent damage and ensure stability during transit.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Possess a valid Heavy Vehicle Driving License issued by Kuwaiti authorities.</p></li><li><p>Ready to join immediately and article 18 transferrable visa holders.</p></li><li><p>Minimum of 3-5 years of proven experience driving heavy vehicles for local transfers within Kuwait.</p></li><li><p>Demonstrated ability to operate various heavy-duty trucks, tankers, or specialized transport vehicles safely.</p></li><li><p>Familiarity with Kuwait's road network, including major highways, industrial zones, and traffic regulations.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. JOB DETAILS Direct Report Project HSE Manager Operational Scope Civil Works | Drilling &amp; Completions | Work Over | Facilities | Production Supervises Mechanical Lifting contractors; Drilling Rig Lifting Crews; any Contractor performing Mechanical Lifting activities under SLB operational control; site level DROPS auditors and HSE Specialists in their execution of the DROPS Program</p><p>2. ROLE PURPOSE The Mechanical Lifting &amp; DROPS Subject Matter Expert Lead is the SLB Mutriba Project authority for the safe design, planning, execution, and continuous improvement of Mechanical Lifting and Dropped Objects Prevention (DROPS) activities across the Mutriba Field Development Project. The role combines planning and operational SME oversight of lifting operations with assurance of the Project's DROPS system implementation, ensuring full compliance with SLB standards, client requirements, and applicable regulatory frameworks across all project phases and contractor interfaces.</p><p>3. KEY RESPONSIBILITIES</p><p>Mechanical Lifting SME</p><ul><li>Lead the planning, preparation, implementation, monitoring, and review of Mechanical Lifting Plans (MLPs) for all project phases, including all prevention and mitigation measures.</li><li>Review and validate all critical lifting plans prepared by SLB and Contractors, categorize lifts in accordance with the Lift Categorization Questionnaire, and submit Critical and Non-Routine lifts to the right channels.</li><li>Personally supervise the execution of Non-Routine, Critical, and Complex lifts across all project locations, such as Rig Mobilization, Initial Rig Moves, Skidding operations and de-mobilization.</li><li>Ensure all lifting risk assessments (HARC/JSA) are prepared, reviewed, and adequate prior to the commencement of any lifting operation.</li><li>Assess Pre-Job Safety Meetings (PJSMs) related to mechanical lifting operations and verify that controls identified in the MLP and HARC are communicated and understood by all participants.</li><li>Advise and stop lifting operations during adverse weather conditions (lightning, high-wind events) and verify suspension and resumption criteria are clearly defined and enforced at site level.</li><li>Establish, maintain, and audit all Project Lifting Equipment Registers across all rig sites and call-out services, ensuring all lifting appliances and accessories are inspected, certified, color-coded, and fit for purpose.</li><li>Verify that third-party lifting equipment introduced to SLB managed sites holds valid certification from an LEEAaccredited or equivalent body, aligned with applicable standards.</li><li>Ensure adequate storage and in-service maintenance of all lifting gear and accessories in accordance with Project and client s requirements.</li><li>Drive compliance with SLB's Mechanical Lifting Standard (SLB-HSE-S013) and Mechanical Lifting B.O.O.K. (SLB-HSE-M013) across all contractor interfaces.</li><li>Conduct frequent, structured audits of all ML activities and equipment at rig sites and call-out service locations, documenting findings and tracking corrective actions closure.</li><li>Perform ML related assessments for the Annual Audit and Inspection Plan (AAIP) to verify ongoing compliance with SLB standards, client procedures, and regulatory requirements.</li><li>Report all lifting-related events in QUEST (SLB incident management system) in a timely manner, ensuring accuracy of classification, causal analysis, and corrective/preventive action assignment.</li><li>Lead or actively participate in investigations of any incident, near miss, or high-potential event related to mechanical lifting operations.</li><li>Coach, assess, and verify the competence of personnel involved in ML operations such as Lifting Supervisors, Crane Operators, Banksmen, and Riggers, against defined competency frameworks.</li><li>Maintain competency assessment records and ensure training validity periods are tracked and renewed.</li><li>Deliver or coordinate delivery of ML awareness and technical training as required by project needs.</li><li>Serve as primary interface with customer s Lifting Authority for ML plans, approvals, and regulatory compliance.</li></ul><p>DROPS Authority</p><ul><li>Project-level DROPS Program Assurance Lead for integrity, consistency, and effectiveness of the DROPS prevention program across all Mutriba Project locations.</li><li>Review, evaluate, and formally validate DROPS Inspection Reports submitted by rig sites and service locations, verifying accuracy on findings, classification, and effectiveness and closure of corrective actions.</li><li>Validate the correct implementation of DROPS, including DROPS Zone identification, zoning maps, barrier deployment, DROPS Picture Books, tethered tool program, and related.</li><li>Conduct structured DROPS Program audits across all active project phases and locations, assessing compliance with SLB-HSE-S023 (DROPS Standard) and the DROPS B.O.O.K. (SLB-HSE-M023).</li><li>Verify DROPS inspection checklists for rig-ups, and the maintenance of DROPS Inspection Schedules.</li><li>Support site-level HSE Supervisors in identifying dropped object and Work at Height hazards.</li><li>Ensure DROPS incidents are reported, classified, and investigated in accordance with project and SLB requirements, and lessons-learned dissemination across the project.</li><li>Maintain and monitor DROPS program performance metrics; escalate systemic non-conformances.</li></ul><p>Additional Responsibilities</p><ul><li>Participate in Project HAZOP/HARC processes as the ML and DROPS SME for ML scenarios under review.</li><li>Support development and review of project HSE Plans, procedures, and standards related to ML and DROPS.</li><li>Contribute to pre-mobilization readiness reviews as the ML/DROPS technical authority.</li><li>Support emergency response planning for lifting-related scenarios (crane collapse, load drop, manriding rescue) and verify that adequate rescue plans are in place.</li><li>Assist developing the Annual Audit and Inspection Plan (AAIP) for ML and DROPS activities.</li></ul><p>4. AUTHORITY</p><ul><li>Authority to Stop Work on any mechanical lifting or related activity that does not comply with approved lift plans, SLB standards, or client requirements.</li><li>Authority to reject and require re-submission of non-compliant lift plan with SLB or client requirements.</li><li>Authority to require the removal of lifting equipment or accessory found defective, uncertified, or non-compliant.</li><li>Authority to withhold validation for any site or location non-compliant with DROPS system requirements.</li><li>Authority to escalate non-conformances to Contractor and Project Management</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in engineering or Technical Career</li><li>Professional Certification: LEEA Appointed Person for Lifting Operations or similar.</li><li>Third-party certification credited by LEEA or NSL.</li><li>DROPS Level 3 Focal Point.</li><li>Minimum 10 years of experience in a dedicated Mechanical Lifting supervisory or SME capacity, preferably on the Oil &amp; Gas Industry.</li><li>Demonstrated experience operating in multi-contractor onshore drilling environments, including direct supervision of crane, rigging, and lifting appliance crews.</li><li>Prior experience conducting DROPS program audits and managing DROPS systems at rig or field level</li><li>Fluent English mandatory. Arabic is an advantage.</li></ul><p></p></section>

<p>Job Title: Solution Architect (Automotive) Location: Kuwait Experience: 9+ Years in Salesforce (3+ Years as Solution Architect Job Summary We are looking for an experienced Solution Architect to lead the end-to-end architecture for a large-scale CRM transformation program. The ideal candidate should have strong expertise in enterprise CRM platforms, solution architecture, integrations, data architecture, and stakeholder management. You will work closely with business leaders, delivery teams, and System Integrators (SI) to design scalable, secure, and future-ready CRM solutions.</p><p><strong>Desired Candidate Profile</strong></p><br><br><p><strong>Key Responsibilities</strong></p><ul><li><p>Lead end-to-end CRM solution architecture across business, application, data, and integration layers.</p></li><li><p>Design scalable, secure, and high-performing CRM solutions aligned with enterprise standards.</p></li><li><p>Conduct solution design workshops and translate business requirements into technical solutions.</p></li><li><p>Define integration architecture for CRM with ERP, Finance, DMS, Customer Portals, Marketing platforms, and Data Warehouses.</p></li><li><p>Review and approve solution designs, integration specifications, and data models.</p></li><li><p>Define data architecture, migration strategy, governance, and data quality standards.</p></li><li><p>Provide technical leadership during design, development, testing, deployment, and post-go-live support.</p></li><li><p>Work closely with System Integrators, vendors, and internal teams to ensure architectural consistency.</p></li><li><p>Present architecture decisions, risks, and recommendations to business and executive stakeholders.</p><br></li></ul><p><strong>Required Skills & Experience</strong></p><ul><li><p>9+ years of experience as a Solution/Technical Architect on enterprise CRM or Digital Transformation projects.</p></li><li><p>Strong experience with CRM platforms such as <strong>Salesforce, Microsoft Dynamics 365, SAP CRM, or HubSpot Enterprise</strong>.</p></li><li><p>Expertise in Enterprise Integration, REST APIs, Middleware, Data Architecture, and Solution Governance.</p></li><li><p>Experience working in multi-vendor environments with System Integrators (SI).</p></li><li><p>Strong understanding of enterprise security, compliance, and architecture frameworks.</p></li><li><p>Excellent communication, stakeholder management, and leadership skills.</p><br></li></ul><p><strong>Qualifications</strong></p><ul><li><p>Bachelor's Degree in Computer Science, Engineering, or related field.</p></li><li><p><strong>TOGAF Certification</strong> preferred.</p></li><li><p>Salesforce Architect / Microsoft Dynamics 365 Architect or equivalent CRM certifications are an added advantage.</p><br></li></ul><p><strong>Preferred Profile</strong></p><ul><li><p>Experience leading enterprise CRM transformation programs.</p></li><li><p>Strong analytical, problem-solving, and decision-making skills.</p></li><li><p>Ability to influence senior stakeholders and lead cross-functional teams.</p></li><li><p>Experience in C-level stakeholder engagement and enterprise architecture governance.</p></li></ul>