وظائف مطورين Git في الكويت

<p><h4>Function:</h4> <p>Provides training and advice for repair, calibration, and modification of the wide variety of complex precision measurement equipment utilized by the GOK activities. Provides technical and procedural advice and guidance to KAF personnel and other GOK personnel concerning metrology-related matters such as the repair, calibration, or modification of precision measurement equipment, the conduct of laboratory operations, and the resolution of customer measurement problems. Provides in-depth technical expertise in one or more of the following disciplinary categories and can provide on-the-job training or formal classroom training as required. Performs precision measurements, calibrations, modifications, maintenance and repair actions, and other functions as necessary in all areas of laboratory operations. Assists in obtaining and maintaining laboratory quality assurance accreditation.</p> <p>This DC/Low-Frequency discipline includes the following measurement areas: voltage, current, power, resistance, capacitance, inductance, time and frequency (500 MHz and below), and modulation. It also encompasses repair, calibration, and/or modification of items such as audio and low-frequency signal generators, oscilloscopes, digital and analog voltmeters, AC/DC ammeters, watt meters, electronic counters, pulse generators, resistance, capacitance, inductance bridges, automated test equipment, and other general purpose measuring equipment.</p> <p>It is anticipated that engineering technicians will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB, and communicated to the contractor lead.</p> <h4>Qualifications:</h4> <p><strong>Associate’s degree</strong> in electronics technology from an accredited school, and ten (10) years of work experience operating, maintaining, troubleshooting, repairing, and calibrating electronic precision measurement equipment and calibration laboratory reference standards, with a working knowledge of the basic concepts of electronics and science. This knowledge shall include basic electricity, electronics, circuit theory, digital logic, algebra, and physics. OR;</p> <p>Completion of a U.S. military precision measurement and calibration program, a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, and calibrating electronic TMDE such as analog and digital multimeters, electronic counters, function generators, signal generators, analog and digital tape recorders, oscilloscopes, spectrum analyzers, and calibration laboratory measurement standards. Demonstrated experience in troubleshooting TMDE and measurement standards by making measurements with test equipment to identify problems at the component level. Demonstrated basic electronic construction and repair skills, including soldering and wiring, and the ability to perform these functions on delicate circuit cards.</p> <p>Candidate must be able to obtain and maintain a US Secret Clearance (Note: US citizenship is required to obtain and maintain the clearance).</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p><b>Responsibilities:</b></p><ol><li>Operate and maintain advanced laser equipment for various dermatological procedures, ensuring compliance with safety protocols and standards to deliver effective treatment outcomes.</li><li>Conduct thorough patient assessments to determine the suitability of laser treatments, utilizing your expertise to recommend appropriate procedures based on individual needs.</li><li>Monitor and document patient progress throughout the treatment process, using electronic health records to track outcomes and communicate findings to the healthcare team.</li><li>Provide pre-treatment consultations to educate patients about the procedures, potential risks, and expected results, fostering a trusting relationship and enhancing patient satisfaction.</li><li>Collaborate with dermatologists and other medical professionals to develop personalized treatment plans that align with the latest advancements in dermatological care.</li><li>Stay updated on industry trends and technological advancements in laser treatments, participating in ongoing training to enhance your skills and knowledge.</li><li>Ensure a clean and safe working environment by adhering to infection control protocols and maintaining equipment in optimal condition to prevent complications.</li><li>Assist in marketing initiatives by sharing success stories and patient testimonials, contributing to the growth of the practice and enhancing its reputation in the community.</li><li>Participate in team meetings and training sessions, sharing insights and experiences to promote a culture of continuous improvement and professional development.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in operating various laser technologies used in dermatology, ensuring optimal treatment delivery.</li><li>Strong understanding of dermatological conditions and treatment protocols to provide informed patient care.</li><li>Excellent communication skills to effectively educate patients and collaborate with medical staff.</li><li>Detail-oriented with strong organizational skills to manage patient records and treatment documentation accurately.</li><li>Ability to work in a fast-paced environment while maintaining a high level of patient care and safety.</li><li>Commitment to continuous learning and professional development in the field of dermatology.</li><li>Team player with a positive attitude, contributing to a supportive and collaborative work culture.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Position: Internal Auditor</span></p><br> <p><span>Classification:</span> Staff <br><span>Reports To:</span> Director of Internal Audit<br><span>About The American International University</span></p><br> <p>American International University (AIU) is a private institution in Kuwait, founded in 2019, offering undergraduate programs based on the American model of higher education. AIU provides degrees in Engineering, Architecture and Design, Business Administration, Arts and Sciences, and Education, with English as the language of instruction. The University is committed to fostering intellectual, cultural, and personal growth, preparing graduates for leadership roles in a global society.</p><br> <p>AIU is executing its RISE Strategy 2026–2030 a five-year transformation anchored in research development, WSCUC international accreditation, student success, and community engagement. A credible, independent internal audit function is foundational to this strategy: WASC evaluators will assess whether AIU has the operational integrity, process discipline, and risk management culture that institutional accreditation requires. The Director of Internal Audit builds and sustains that foundation.</p><br> <p>For more information, visit: www.aiu.edu.kw<br></p><br> <p><span>Department Profile</span></p><br> <p>The Office of Internal Audit is an independent, objective assurance and advisory function. Its purpose is not to find fault it is to give AIU's leadership and Board the confidence that the institution's operations, processes, and controls are functioning as intended and are fit for the purposes the RISE Strategy demands.</p><br> <p>The Internal Auditor assists in carrying out operational audits across academic and administrative functions, identifying risks, recommending improvements, and supporting the implementation of corrective actions.</p><br> <p><span>Position Summary</span></p><br> <p>The Internal Auditor performs operational, compliance, and risk-based audits across AIU's academic and administrative units. The role evaluates internal controls, reviews institutional processes, identifies opportunities for improvement, and assists management in strengthening governance and operational effectiveness.</p><br> <p>Working under the supervision of the Director of Internal Audit, the Internal Auditor conducts audit engagements, documents findings, prepares audit reports, and monitors corrective actions while maintaining independence, objectivity, and confidentiality.</p><br> <p><span>Key Responsibilities</span><br></p><br> <p><span>Audit Planning and Execution</span></p><br> <ul> <li>Participate in the execution of the annual risk-based Internal Audit Plan.</li> <li>Conduct operational, compliance, and process audits across academic and administrative departments.</li> <li>Perform audit fieldwork, including interviews, process walkthroughs, document reviews, and testing of internal controls.</li> <li>Assess whether institutional policies, procedures, and regulations are consistently applied.</li> <li>Identify control weaknesses, operational inefficiencies, and compliance gaps.</li> <li>Maintain complete and accurate audit working papers in accordance with professional auditing standards.</li> </ul> <p><span>Operational and Process Reviews</span></p><br> <ul> <li>Evaluate the effectiveness and efficiency of administrative and academic processes.</li> <li>Review Human Resources, Procurement, Student Affairs, Information Technology, Finance, and other operational functions for compliance with University policies.</li> <li>Assess whether established internal controls adequately mitigate operational risks.</li> <li>Verify that corrective actions from previous audits have been implemented effectively.</li> </ul> <p><span>Governance and Compliance</span></p><br> <ul> <li>Evaluate compliance with University policies and procedures.</li> <li>Review compliance with Kuwait Labour Law, applicable regulatory requirements, and institutional governance practices.</li> <li>Assist in assessing policy implementation across schools and departments.</li> <li>Support reviews of conflict-of-interest disclosures, policy compliance, and governance documentation.</li> </ul> <p><span>Risk Management</span></p><br> <ul> <li>Assist in identifying operational risks affecting the University.</li> <li>Contribute to maintaining the institutional risk register.</li> <li>Support periodic risk assessments across departments.</li> <li>Monitor the implementation of risk mitigation plans and report outstanding issues.</li> </ul> <p><span>Audit Reporting</span></p><br> <ul> <li>Prepare clear, accurate, and evidence-based audit reports.</li> <li>Document audit observations, root causes, risks, and practical recommendations.</li> <li>Discuss preliminary findings with department management.</li> <li>Present audit results to the Director of Internal Audit for review.</li> </ul> <p><span>Follow-up Activities</span></p><br> <ul> <li>Track management action plans resulting from audit findings.</li> <li>Verify completion and effectiveness of corrective actions.</li> <li>Maintain records of outstanding audit recommendations.</li> <li>Prepare follow-up reports on implementation progress.</li> </ul> <p><span>Advisory and Special Projects</span></p><br> <ul> <li>Provide advisory support on internal controls, process improvements, and risk management.</li> <li>Assist with investigations into reported irregularities, policy violations, or operational concerns when assigned.</li> <li>Participate in special audit assignments and institutional projects.</li> <li>Support preparation for accreditation reviews by evaluating operational evidence and compliance processes.</li> </ul> <p><span>Minimum Qualifications</span></p><br> <p><span>Education</span></p><br> <ul> <li>Bachelor's degree in Accounting, Finance, Business Administration, Internal Auditing, or a related field.</li> <li>Master's degree is preferred.</li> </ul> <p><span>Experience</span></p><br> <ul> <li>Minimum three (3) to five (5) years of experience in internal auditing, operational auditing, compliance, risk management, or a related field.</li> <li>Experience conducting operational or process audits is preferred.</li> <li>Experience in higher education, public sector, or a similarly regulated environment is an advantage.</li> <li>Knowledge of internal control frameworks and risk management principles.</li> <li>CIA certification or progress toward obtaining CIA certification is preferred.</li> </ul> <p><span>Skills and Competencies</span></p><br> <ul> <li>Strong analytical and problem-solving skills.</li> <li>Excellent written and verbal communication skills.</li> <li>Ability to prepare professional audit reports with clear recommendations.</li> <li>Sound understanding of internal control principles and audit methodologies.</li> <li>Ability to analyze complex processes and identify operational risks.</li> <li>High level of integrity, objectivity, and professional ethics.</li> <li>Strong organizational and time management skills.</li> <li>Ability to maintain confidentiality when handling sensitive information.</li> <li>Proficiency in Microsoft Office applications and audit documentation tools.</li> <li>Ability to build effective working relationships across the University while maintaining audit independence.</li> </ul> <p><span>Working Relationships</span></p><br> <p>The Internal Auditor works collaboratively with all academic and administrative departments while maintaining professional independence. The role regularly interacts with department heads, faculty, staff, and senior administrators during audit engagements and reports directly to the Director of Internal Audit.</p><br> <p><span>Preferred Qualifications</span></p><br> <ul> <li>Certified Internal Auditor (CIA) or other relevant professional certification.</li> <li>Knowledge of higher education governance and accreditation standards (particularly WSCUC) is desirable.</li> <li>Familiarity with Kuwait regulatory and compliance requirements is an advantage.</li> <li>Experience with Enterprise Risk Management (ERM) methodologies is preferred.</li> </ul> <p>Submit applications via: https://aiu.edu.kw/careers/jobs</p><br> <p>The successful candidate is expected to commence employment at the earliest convenience and no later than December 2026.</p><br> <p>AIU is an equal opportunity employer committed to academic excellence, professional integrity, and the principled governance of Kuwaiti higher education.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Passionate about football (soccer) AND about business?<br> Stranger Soccer is expanding to key cities around the world.<br> We are looking for a License Owner to open and operate the Stranger Soccer business in Kuwait City,.<br> This is not your traditional management job - it is truly built for someone that wants to own and operate their own business (that happens to make the world's greatest sport accessible to everyone).<br> This role is ideally suited for an adventurous and football-passionate entrepreneur.<br> Sounds Like You?<br> As a next step, please visit www.<br>strangersoccer.<br>com and particularly the section Bring Stranger Soccer to your City to learn more about this dynamic opportunity.<br> If it appears to be a fit, and you wish to learn more, please fill out the form there to officially express your interest.<br> Be sure to download and explore the Stranger Soccer mobile app as well.<br> Responsibilities • Bring the Stranger Soccer brand and business to life for the assigned city • Recruit, train, and lead a small central team (2-3 persons) as well as a few freelance Official Hosts (game hosts) to kick off the operation • Identify and secure prime slots at football venues to run Stranger Soccer games • Engage in creative sales and marketing digital and hands-onto ensure that customers are introduced to the platform as a convenient and preferred way to play • Oversee a schedule of games, ensuring customers are delighted with each game they play, and keep coming back for more • Take advantage of the strong backing and direction of Singapore headquarters, where an operations and technology team is ready to support you.<br> You should have • A passion for football, and a strong connection to your local football scene • A business background, ideally in management and customer service • An entrepreneurial background or spirit • A commitment to owning, driving, and scaling the Stranger Soccer brand in the assigned market • A hunger to succeed: financial compensation for this role will be proportionate to hard work, business acumen, and effectiveness.<br> About Stranger Soccer With 3.<br>5 billion football enthusiasts in over 200 countries, football is the most popular sport in the world.<br> But why don't more people play it?<br> Stranger Soccer ( www.<br>strangersoccer.<br>com ) makes playing football as easy as going for a jog or to the gym.<br> Browse dozens of games on its acclaimed Mobile App.<br> Book a slot.<br> Turn up and play.<br> Born in Singapore, Stranger Soccer is now open in 10+ cities around the world, with over 100,000 games run.<br> We continue to grow and are accepting applications from license partners who want to bring Stranger Soccer to their city.<br> Whether you call it Fussball, Fútbol, Calcio, or anything else, the world now awaits.<br> Our Mission To make playing football as easy as going for a jog.<br> Our Vision A world in which playing football is as popular and widespread as watching football.<br> Got what it takes?<br> We look forward to meeting you.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Passionate about football (soccer) AND about business?<br> Stranger Soccer is expanding to key cities around the world.<br> We are looking for a License Owner to open and operate the Stranger Soccer business in Kuwait City.<br> This is not your traditional management job - it is truly built for someone that wants to own and operate their own business (that happens to make the world's greatest sport accessible to everyone).<br> This role is ideally suited for an adventurous and football-passionate entrepreneur.<br> Sounds Like You?<br> As a next step, please visit www.<br>strangersoccer.<br>com and particularly the section Bring Stranger Soccer to your City to learn more about this dynamic opportunity.<br> If it appears to be a fit, and you wish to learn more, please fill out the form there to officially express your interest.<br> Be sure to download and explore the Stranger Soccer mobile app as well.<br> Responsibilities • Bring the Stranger Soccer brand and business to life for the assigned city • Recruit, train, and lead a small central team (2-3 persons) as well as a few freelance Official Hosts (game hosts) to kick off the operation • Identify and secure prime slots at football venues to run Stranger Soccer games • Engage in creative sales and marketing digital and hands-onto ensure that customers are introduced to the platform as a convenient and preferred way to play • Oversee a schedule of games, ensuring customers are delighted with each game they play, and keep coming back for more • Take advantage of the strong backing and direction of Singapore headquarters, where an operations and technology team is ready to support you.<br> You should have • A passion for football, and a strong connection to your local football scene • A business background, ideally in management and customer service • An entrepreneurial background or spirit • A commitment to owning, driving, and scaling the Stranger Soccer brand in the assigned market • A hunger to succeed: financial compensation for this role will be proportionate to hard work, business acumen, and effectiveness.<br> About Stranger Soccer With 3.<br>5 billion football enthusiasts in over 200 countries, football is the most popular sport in the world.<br> But why don't more people play it?<br> Stranger Soccer ( www.<br>strangersoccer.<br>com ) makes playing football as easy as going for a jog or to the gym.<br> Browse dozens of games on its acclaimed Mobile App.<br> Book a slot.<br> Turn up and play.<br> Born in Singapore, Stranger Soccer is now open in 10+ cities around the world, with over 100,000 games run.<br> We continue to grow and are accepting applications from license partners who want to bring Stranger Soccer to their city.<br> Whether you call it Fussball, Fútbol, Calcio, or anything else, the world now awaits.<br> Our Mission To make playing football as easy as going for a jog.<br> Our Vision A world in which playing football is as popular and widespread as watching football.<br> Got what it takes?<br> We look forward to meeting you.<br></span> </div>

<p>We are seeking a passionate and experienced Early Years Teacher to join a dynamic and supportive school community in Kuwait. This exciting opportunity is ideal for a dedicated educator who thrives in a nurturing, child-centred environment and is committed to fostering the social, emotional, and academic development of young learners. The successful candidate will play a key role in delivering a high-quality early years curriculum, creating engaging learning experiences, and supporting each child s individual growth during their most formative years.</p><p>Teaching in Kuwait offers a unique blend of professional growth, cultural enrichment, and financial reward. With modern school facilities, supportive international communities, and a tax-free salary, educators enjoy both a high standard of living and the chance to make a meaningful impact. The country s rich heritage and welcoming environment make it an ideal destination for teachers seeking adventure and career development in the heart of the Middle East. Interviews are still underway for an August 2026 start!</p><p>A leading international institution in Kuwait offering a world class British curriculum from early years through secondary education. Known for its strong academic standards, supportive environment, and diverse student body, it provides learners with the skills and confidence to thrive globally. With modern facilities, dedicated teachers, and a commitment to holistic development, the school nurtures excellence in academics, creativity, and character preparing students for success in higher education and beyond.</p><ul><li>Have a meaningful impact on young children's development</li><li>Enjoy a competitive salary and benefits package</li><li>Live near beautiful beaches, top shopping destinations, and vibrant Kuwait City</li><li>Experience year-round sunshine and clear blue skies</li></ul><p>BA Degree in Early Childhood Studies with QTS</p><p>Prior teaching experience in a British Curriculum school</p><p>Dynamic and enthusiastic</p><p>Flexible and committed</p><p>Available to start 23 August 2026</p><p><strong>Desired Candidate Profile</strong></p><ul><li>BA Degree in Early Childhood Studies with QTS</li><li>Prior teaching experience in a British Curriculum school</li><li>Dynamic and enthusiastic</li><li>Flexible and committed</li><li>Available to start 23 August 2026</li></ul>

<ul><li>Proactively identify and engage potential freelance clients through targeted outreach on various platforms.</li><li>Develop and execute compelling sales pitches and proposals tailored to individual client needs and pain points.</li><li>Nurture leads through the sales funnel, building rapport and trust to foster long-term relationships.</li><li>Negotiate contract terms, pricing, and project scopes to ensure mutually beneficial agreements.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Business, Marketing, Communications, or a related field.</li><li>Minimum of 3 years of proven experience in sales, business development, or client acquisition, preferably in a freelance or agency setting.</li><li>Demonstrated success in identifying and closing new business opportunities.</li><li>Proficiency in CRM software (e.g., HubSpot, Salesforce) and sales enablement tools.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Description HR Coordinator You are a multi-tasker and are able to work independently, performing a wide range of HR administrative duties to support your team. Support HR operations. Assist in recruiting and onboarding. Maintain employee documentation and records. You communicate well with all contacts, anticipate and resolve issues, and update team your various projects.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Your experience and skills include:</p><ul><li>Excellent interpersonal and communication skills</li><li>Ability to prioritize work in an environment with multiple interests</li><li>Ability to handle complex and confidential information with discretion</li><li>Competency using a variety of computer softwares</li></ul><p></p></section>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<p>Key Responsibilities: Meet with clients face to face or over the phone. Have a good understanding of the businesses' services and be able to communicate with the clients thoroughly. Understand the needs of the clients and be able to respond effectively with a plan of how to meet them. Provide information about the rooms/suites, services, doctors, charges to the clients. Show the rooms/suites and facilities to the clients. Reserve the rooms/suites for the clients including VIP and VVIP. Follow up with the clients for their interest, and room reservations. Congratulating the clients on deliveries, and distributing the complimentary gifts on a daily basis. Preparing a certificate gift for the new born babies. Foster and develop relationships with the existing clients. Seek out the appropriate contact in an organization. Think and work strategically setting goals and objectives in order to develop and improve the business. Train members of your team where appropriate. Attend training/seminars where appropriate. Carry on all the administrative tasks related to the department. Others as assigned by the Dept. Head.</p><p><strong>Desired Candidate Profile</strong></p><p>University Degree from a reputed university. At least 2 years experience in customer service and dealing with the VIP clients. Sales tactical personality. Smart, professional, and presentable personality. Strong interpersonal, organizational, and communication skills. Problem solving and attention to details. Proficient with MS Office and standard hospital database technology.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Location:</b></p><br><br>Kuwait City, Al Kuwayt, Kuwait<br><p><b>Job ID:</b></p><br><br>R0136553<br><p><b>Date Posted:</b></p><br><br>2026-07-30<br><p><b>Company Name:</b></p><br><br>HITACHI ENERGY ENGINEERING TECHNOLOGIES CO. (KSCC)<br><p><b>Profession (Job Category):</b></p><br><br>Engineering &amp; Science<br><p><b>Job Schedule:&nbsp;</b></p><br><br>Full time<br><p><b>Remote:</b></p><br><br>No<br><p><b>Job Description:</b></p><br><br><p>Job Summary**<br>We are seeking a highly motivated and experienced Project Management Engineering Professional (Project Lead Engineer) to join our dynamic team at Hitachi, Ltd. This role will be responsible for leading the technical aspects of complex engineering projects from conception to completion, ensuring successful delivery within scope, budget, and schedule. The ideal candidate will possess a strong blend of technical expertise, project management skills, and leadership capabilities.<br>Job Responsibilities**<br>* Lead and manage the technical execution of engineering projects, overseeing design, development, testing, and deployment phases.<br>* Define project technical objectives, scope, and deliverables in collaboration with stakeholders and ensure alignment with business goals.<br>* Develop and maintain comprehensive project plans, schedules, and resource allocation strategies.<br>* Identify, assess, and mitigate technical risks and issues throughout the project lifecycle.<br>* Manage and mentor project engineering teams, providing technical guidance and fostering a collaborative work environment.<br>* Communicate project status, technical challenges, and solutions effectively to internal and external stakeholders.<br>* Ensure adherence to relevant engineering standards, quality procedures, and regulatory requirements.<br>* Conduct technical reviews and approvals of designs, specifications, and documentation.<br>* Contribute to the continuous improvement of engineering processes and methodologies.<br>* Collaborate with cross-functional teams, including R&amp;D, manufacturing, procurement, and sales, to achieve project objectives.<br>Job Qualifications**<br>* Bachelor's degree in Electrical Engineering<br>* Minimum of 14 years of experience in engineering, with at least 5 years in a project lead role<br>* Proven track record of successfully leading and delivering complex engineering projects.<br>* Excellent leadership, communication, and interpersonal skills.<br>* Ability to manage multiple priorities and work effectively in a fast-paced environment.<br>* Strong analytical and problem-solving abilities.<br>&nbsp;</p><br><br><br><br><p><b>Accessibility and reasonable accommodation</b></p><br><br><p><b>Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a </b><span><b><u>general inquiry form</u></b></span><b> on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.</b></p><br><br><br><p><b>This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.</b></p><br><br><br><p><b>Use of Al and automated tools in recruitment</b></p><br><br><p><b>As part of our recruitment process, Hitachi Energy uses digital and automated tools, including Al-supported solutions, to assist with activities such as application screening, job matching, and interview scheduling. These tools are designed to support our recruiters and do not replace human decision-making. Candidate data is processed in accordance with applicable data protection and employment laws as well as </b><span><b><u>Hitachi's Global Data Privacy Notice.</u></b></span><b><br><span>Background Screening and Security Checks</span></b></p><br><br><p><b><span>As part of the hiring process, Hitachi Energy conducts pre-employment background checks that may include verification of employment history, education, criminal records, and other relevant information, in accordance with applicable laws.</span></b></p><br><br><p><b><span>For certain roles—particularly those involving access to sensitive information, financial responsibilities, client data, regulated environments, or security-sensitive functions—additional or more comprehensive background or security screenings may be required. These may include, but are not limited to, enhanced criminal history checks, credit history reviews (where legally permissible), sanctions screening, or other due diligence measures aligned with the responsibilities of the position.</span></b></p><br><br><p><b><span>The scope and depth of any background or security review will be determined based on the nature of the role and business necessity, and will always be conducted in compliance with applicable federal, state, and local laws. Candidates will be notified and, where required, asked to provide consent prior to the initiation of any such checks.</span></b></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Mindrift is looking for skilled Bot Developers (WhatsApp Business API, Telegram Bot API, Discord API) to join the Tendem project (https://tendem.<br>ai/) and build conversational bots and messaging-platform integrations for real-world applications.<br> In this role, you'll use your bot engineering expertise, conversational design skills, and quality-focused approach to build reliable, useful bots and messaging integrations that deliver a great user experience.<br> This part-time remote opportunity is ideal for professionals with hands-on experience building messaging bots, working with platform APIs and webhooks, and implementing conversational logic.<br> What We Do The Mindrift platform connects specialists with innovative technology projects.<br> Our mission is to help develop high-quality AI technologies by combining real-world expertise from professionals across the globe with advanced AI development efforts.<br> About the Role This is a freelance role for a Tendem project.<br> As a Bot Developer, you'll design, build, and refine messaging bots for one or more messaging platforms, including WhatsApp, Telegram, Discord, Slack, and similar platforms — for use cases such as customer service, appointment booking, order taking, content delivery, moderation, and automated notifications.<br> Key Responsibilities Build bots for one or more messaging platforms, such as WhatsApp (Business API / Cloud API), Telegram (Bot API), Discord, Slack and similar messaging platforms.<br> Design and implement conversational flows, dialogue state, and fallback handling.<br> Integrate bots with LLMs (OpenAI, Anthropic, or similar) for natural language responses where appropriate.<br> Connect bots to backend services, databases, CRMs, and third-party APIs (booking systems, payment, content sources).<br> Handle webhooks, rate limits, and platform-specific message formats (interactive messages, buttons, media, templates).<br> Review, debug, optimize, and refactor bot implementations to improve correctness, reliability, maintainability, and graceful error handling.<br> Implement logging, monitoring, and recovery so bots stay healthy in production.<br> Requirements and benefits Educational qualifications At least 3 years of relevant experience backend, integration, automation, or bot development experience (required).<br> Bachelor's or Master's Degree in Computer Science, Engineering, Information Technology, or related technical fields is a plus.<br> Academic and/or Professional Experience Candidates should have a strong foundation in bot development, messaging platform integrations, and building reliable conversational workflows.<br> We are looking for specialists who can design and maintain production-ready bots, work confidently with APIs, webhooks, and backend services, and build stable, user-friendly bot experiences.<br> Strong problem-solving skills, attention to detail, and the ability to work independently are essential.<br> Technical Skills (Essential) At least 1 year of hands-on experience building bots for at least one major messaging platforms (WhatsApp, Telegram, Discord, Slack, or similar) is required Strong command of Python or Node.<br>js for backend bot logic.<br> Solid experience with REST APIs, webhooks, OAuth, and async request handling.<br> Experience with relational or NoSQL databases for storing conversation state and user data.<br> Familiarity with LLM APIs (OpenAI, Anthropic) and prompt design for conversational use is a strong plus.<br> Understanding of platform-specific limits, message templates, and approval flows (e.<br>g., WhatsApp template messages).<br> Experience with hosting and deployment (Docker, serverless, VPS, or PaaS) Additional requirements Strong attention to detail and commitment to bot reliability — no silent failures, no broken flows.<br> Self-directed work ethic with the ability to design and ship complete bots independently.<br> Portfolio or examples of bots you've built (required).<br> English proficiency: Upper-intermediate (B2) or above (required) Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Compensation On this project, contributors can earn up to $60 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br> Why this freelance opportunity might be a great fit for you?<br> Work fully remote on your own schedule with just a laptop and stable internet connection.<br> Apply your expertise to real-world technology projects while gaining experience building high-quality solutions for a global platform.<br> Participate in performance-based bonus programs that reward high-quality work and consistent delivery.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Mindrift is looking for skilled Bot Developers (WhatsApp Business API, Telegram Bot API, Discord API) to join the Tendem project (https://tendem.<br>ai/) and build conversational bots and messaging-platform integrations for real-world applications.<br> In this role, you'll use your bot engineering expertise, conversational design skills, and quality-focused approach to build reliable, useful bots and messaging integrations that deliver a great user experience.<br> This part-time remote opportunity is ideal for professionals with hands-on experience building messaging bots, working with platform APIs and webhooks, and implementing conversational logic.<br> What We Do The Mindrift platform connects specialists with innovative technology projects.<br> Our mission is to help develop high-quality AI technologies by combining real-world expertise from professionals across the globe with advanced AI development efforts.<br> About the Role This is a freelance role for a Tendem project.<br> As a Bot Developer, you'll design, build, and refine messaging bots for one or more messaging platforms, including WhatsApp, Telegram, Discord, Slack, and similar platforms — for use cases such as customer service, appointment booking, order taking, content delivery, moderation, and automated notifications.<br> Key Responsibilities Build bots for one or more messaging platforms, such as WhatsApp (Business API / Cloud API), Telegram (Bot API), Discord, Slack and similar messaging platforms.<br> Design and implement conversational flows, dialogue state, and fallback handling.<br> Integrate bots with LLMs (OpenAI, Anthropic, or similar) for natural language responses where appropriate.<br> Connect bots to backend services, databases, CRMs, and third-party APIs (booking systems, payment, content sources).<br> Handle webhooks, rate limits, and platform-specific message formats (interactive messages, buttons, media, templates).<br> Review, debug, optimize, and refactor bot implementations to improve correctness, reliability, maintainability, and graceful error handling.<br> Implement logging, monitoring, and recovery so bots stay healthy in production.<br> Requirements and benefits Educational qualifications At least 3 years of relevant experience backend, integration, automation, or bot development experience (required).<br> Bachelor's or Master's Degree in Computer Science, Engineering, Information Technology, or related technical fields is a plus.<br> Academic and/or Professional Experience Candidates should have a strong foundation in bot development, messaging platform integrations, and building reliable conversational workflows.<br> We are looking for specialists who can design and maintain production-ready bots, work confidently with APIs, webhooks, and backend services, and build stable, user-friendly bot experiences.<br> Strong problem-solving skills, attention to detail, and the ability to work independently are essential.<br> Technical Skills (Essential) At least 1 year of hands-on experience building bots for at least one major messaging platforms (WhatsApp, Telegram, Discord, Slack, or similar) is required Strong command of Python or Node.<br>js for backend bot logic.<br> Solid experience with REST APIs, webhooks, OAuth, and async request handling.<br> Experience with relational or NoSQL databases for storing conversation state and user data.<br> Familiarity with LLM APIs (OpenAI, Anthropic) and prompt design for conversational use is a strong plus.<br> Understanding of platform-specific limits, message templates, and approval flows (e.<br>g., WhatsApp template messages).<br> Experience with hosting and deployment (Docker, serverless, VPS, or PaaS) Additional requirements Strong attention to detail and commitment to bot reliability — no silent failures, no broken flows.<br> Self-directed work ethic with the ability to design and ship complete bots independently.<br> Portfolio or examples of bots you've built (required).<br> English proficiency: Upper-intermediate (B2) or above (required) Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Compensation On this project, contributors can earn up to $60 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br> Why this freelance opportunity might be a great fit for you?<br> Work fully remote on your own schedule with just a laptop and stable internet connection.<br> Apply your expertise to real-world technology projects while gaining experience building high-quality solutions for a global platform.<br> Participate in performance-based bonus programs that reward high-quality work and consistent delivery.<br></span> </div>

<p>Serving as a focal point between the hospital departments and the clients. Maintaining a positive, empathetic, and professional attitude toward the clients at all times. Ensuring clients are properly greeted and welcomed at the reception desk. Providing accurate information as requested by clients at the desk or over the phone. Directing clients according to their respective queries/departments. Helping clients in rescheduling/modifications of appointments. Managing patient complaints in recording, and sending it to the concerned to resolve. Listen to customers concerns, issues and questions. Resolve customers concerns and answer customers questions to the best possible way. Following up with patients to ensure their inquiry or complaint has been satisfactorily resolved. Responsible for managing patient reward system. Responsible for maintaining a clean and safe work environment. Maintain a working knowledge of department policies and procedures. Secure everything at Information and Services desk at the end of each shift. Performing administrative and clerical duties, such as filing paperwork, when necessary. Others as assigned by the department manager.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in business management or any related field. At least 4 years of related work experience. Customer service oriented personality. Stress tolerance. Excellent organizational skills and attention to detail. Excellent verbal and written communication skills. Proficient in Microsoft Office Suite.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Job Overview&nbsp;</strong></span></span></p><br><p><span><span>The <strong>R&amp;M Technician III – Liner Hanger</strong> is responsible for the inspection, maintenance, repair, testing, and refurbishment of Liner Hanger systems and associated downhole tools. The role ensures all equipment is serviced, assembled, and certified in accordance with OEM specifications, company procedures, and customer requirements. This position supports workshop and field operations while maintaining the highest standards of safety, quality, and operational excellence. Senior technicians may provide technical expertise, troubleshoot complex tool failures, and support operational efficiency initiatives.</span></span></p><br><p><span><span><strong>Responsibilities:</strong></span></span></p><br><ul><li><p><span><span>Inspect, repair, maintain, and pressure test Liner Hanger systems and related equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Disassemble, clean, assemble, and refurbish Liner Hanger tools according to OEM procedures.&nbsp;</span></span></p><br></li><li><p><span><span>Diagnose equipment failures and perform troubleshooting and corrective maintenance.&nbsp;</span></span></p><br></li><li><p><span><span>Conduct dimensional inspections, function testing, and quality checks to ensure equipment readiness.&nbsp;</span></span></p><br></li><li><p><span><span>Complete maintenance records, work orders, and inspection documentation accurately.&nbsp;</span></span></p><br></li><li><p><span><span>Ensure compliance with HSE, quality, and operational standards.&nbsp;</span></span></p><br></li><li><p><span><span>Safely operate workshop machinery, lifting equipment, and testing equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Provide technical support and guidance to junior technicians when required.</span></span></p><br></li></ul><p><span><span><strong>Skills:</strong></span></span></p><br><ul><li><p><span><span>Liner Hanger equipment maintenance and repair&nbsp;</span></span></p><br></li><li><p><span><span>Mechanical troubleshooting and failure analysis&nbsp;</span></span></p><br></li><li><p><span><span>Pressure testing and function testing&nbsp;</span></span></p><br></li><li><p><span><span>Assembly and disassembly of downhole tools&nbsp;</span></span></p><br></li><li><p><span><span>Precision measuring and quality inspection&nbsp;</span></span></p><br></li><li><p><span><span>Reading technical drawings and maintenance procedures&nbsp;</span></span></p><br></li><li><p><span><span>Root cause analysis and problem-solving&nbsp;</span></span></p><br></li><li><p><span><span>Strong safety awareness and teamwork</span></span></p><br></li></ul><p><span><span><strong>Qualifications:</strong></span></span></p><br><ul><li><p><span><span>High School Diploma or Technical/Vocational Certificate in Mechanical or related discipline.&nbsp;</span></span></p><br></li><li><p><span><span>4–6 years of experience in Liner Hanger equipment repair and maintenance within the Oil &amp; Gas industry.&nbsp;</span></span></p><br></li><li><p><span><span>Hands-on experience with hydraulic and mechanical Liner Hanger systems, running tools, packers, and related downhole equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Knowledge of pressure testing, dimensional inspection, and equipment certification processes.&nbsp;</span></span></p><br></li><li><p><span><span>Forklift, crane, or lifting equipment certification preferred.&nbsp;</span></span></p><br></li><li><p><span><span>Ability to work in a workshop and field support environment.&nbsp;</span></span></p><br></li><li><p><span><span>Willingness to travel up to 10% as required.</span></span></p><br></li></ul><p><span><span>#LI-MD1</span></span></p><br><br> <p><span>Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation.&nbsp;&nbsp;</span></p><br> <p><span>We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition.&nbsp;&nbsp;</span></p><br> <p><span>Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team.&nbsp;&nbsp;</span></p><br> <p><span>When you join Weatherford, you instantly feel connected to something bigger – a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other’s successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford.&nbsp;</span></p><br> <p><b><span>Join Us:&nbsp;</span></b></p><br> <p><span>Weatherford is producing energy for today and tomorrow- with global opportunities as unlimited as your sense of adventure. Join us to make an impact on our customers, the industry, and the world.&nbsp;&nbsp;</span></p><br> <p><span>Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.</span></p><br> <br> <br> <br><br> </div>

<p><h4>International School One International School (Primary) in Kuwait</h4> <p>We are seeking a dedicated elementary teacher to join our dynamic team. We offer a supportive and enriching environment where educators can inspire young learners through the United States of America curriculum. This position focuses on teaching primary/elementary students, fostering their academic growth and personal development.</p> <p><strong>Position:</strong> Elementary Teacher<br> <strong>Location:</strong> Kuwait<br> <strong>Curriculum:</strong> United States of America<br> <strong>Education Stage:</strong> Elementary/Primary School<br> <strong>Subject Area:</strong> Primary/Elementary/Childhood Education<br> <strong>Position Type:</strong> Full-time Teacher</p> <h4>Skills and Qualifications:</h4> <ul> <li>Bachelor’s degree in education or related field</li> <li>Minimum of 2 years teaching experience at the elementary level</li> <li>Strong knowledge of the USA curriculum standards and instructional strategies</li> <li>Ability to create engaging lesson plans that meet diverse student needs</li> <li>Excellent classroom management skills</li> <li>Effective communication skills with students, parents, and colleagues</li> <li>Proficiency in using educational technology tools</li> </ul> <h4>Values and Attitudes:</h4> <ul> <li>Passionate about nurturing young learners’ curiosity and love for learning</li> <li>Patient, empathetic, and culturally sensitive towards students from diverse backgrounds</li> <li>Committed to continuous professional development</li> <li>Collaborative mindset with willingness to work as part of a team</li> <li>Positive attitude towards challenges with problem-solving approach</li> </ul> <p>If you are enthusiastic about making a meaningful impact on children’s education within an international setting, we encourage you to apply for this rewarding opportunity at International School One International School (Primary).</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a distinguished External Projects and Sales Engineer to be part of our dynamic team in the field of electrical solutions. This exciting opportunity will allow you to work in a vibrant business environment, where you can develop your skills in sales and technology. You will be part of a committed team delivering innovative solutions and quality assurance to our clients, enhancing our market position and reflecting our commitment to excellence.</p><p>You will have multiple opportunities for professional development, as we provide advanced training programs and ongoing support for our team. We believe that our success relies on the success of our employees, and for this reason, we strive to create a work environment that encourages innovation and continuous learning. You will have the chance to work with experienced professionals, which will enable you to expand your network and build new skills that enhance your career trajectory.</p><p>As an External Projects and Sales Engineer, you will have the ability to influence sales strategies and develop relationships with key clients. We are looking for someone with a passion for technology and the ability to understand client needs, enabling you to provide tailored solutions that meet their expectations. Be part of an exciting growth journey, where we work together to achieve our shared goals.</p><p><b>Responsibilities:</b></p><ol><li>Develop innovative sales strategies to increase market share and achieve defined sales objectives through market data analysis and identifying new opportunities.</li><li>Engage with clients to understand their needs and provide appropriate solutions using available electrical tools, enhancing client satisfaction and loyalty.</li><li>Conduct product presentations to potential clients, explaining the technical benefits to facilitate their decision-making process.</li><li>Collaborate with engineering teams to develop new products that meet market needs, contributing to innovation and increasing the company's competitiveness.</li><li>Manage projects from inception to completion, including planning, execution, and monitoring, to ensure timely achievement of desired results.</li><li>Provide technical support to clients post-sale, ensuring their satisfaction and helping to build long-term relationships with them.</li><li>Monitor market trends and competitors, providing regular reports to management, aiding in strategic decision-making.</li><li>Organize promotional activities and exhibitions to enhance product visibility and increase brand awareness, contributing to strengthening market presence.</li><li>Train and mentor new team members, fostering a strong work culture and enhancing team performance.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Effective communication skills to build strong relationships with clients and understand their needs.</li><li>Ability to analyze data to identify market opportunities and achieve sales objectives.</li><li>Deep understanding of technology and electrical tools used in the industry.</li><li>Project management skills to ensure successful project execution within specified timelines.</li><li>Ability to work under pressure and achieve results in a fast-changing environment.</li><li>Negotiation skills to close deals effectively and achieve financial goals.</li><li>Ability to work independently and as part of a team, enhancing collaboration and productivity.</li></ul></div>