وظائف ميديكال ريب في الكويت

<p><br></p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>Drilling Operations:</strong> Ensures the safety of personnel, equipment, and the efficiency of operations on the drill floor and other drilling operation associated areas. Plans and schedules all drilling and associated activity. Directs personnel towards achieving optimum job performance according to the client s requirements. Ensures any deviation from client well plan (Game Plan) is approved by STP, and that Client representative has documented in written form, and that necessary management of change or deviation is approved in Synergi prior to operation starts. Consult with the STP and Client s Representative regarding the progress of the Drilling program and associated operations, keeping the driller informed about the ongoing drilling program objectives and communicating any changes in plans. Ensure that space-out drawings are correct and are posted in the drillers cabin. Overseeing that post-jarring sheet are filled out and understood by the driller. Relieve the Driller at the Driller s console as operational requirement demands. Ensures that all necessary equipment is ready for the next phase of the Drilling / Workover program and that necessary rig procedures, including JSA and PTW, are prepared on time and with good quality for the actual operations. Assists &amp; supervises drilling crew at the location at all relevant times, ensuring circulating time is sufficient and the well is stable on trips, when the BHA is being worked and whenever there is a hole problem. Operates the drilling unit with strict adherence to company Drilling &amp; Well Control manuals, by reviewing and approving all drilling related work permits.</p><p><strong>Well Control:</strong> Ensure that well control requirements are in place according to operational requirements - assist in supervising well killing operations in any well control situation. Plans &amp; monitors comprehensive well control parameters to proactively identify any signs of well control issues for early detection and swift response. Maintains and regularly tests well control equipment, in accordance with Company s and Client s requirement, ensuring its readiness and effectiveness in critical situations. Perform all well control calculations (i.e., mud weight increase, initial and final circulating pressures, number of strokes, etc.).</p><p><strong>Management of Major Emergencies:</strong> To be part of the Rig s Emergency Response Team as detailed in the Emergency Plan and Company Procedures. Ensure that all personnel are instructed in the procedures to be adopted in the case of an emergency. Ensure that Well Control and general safety drills are held and recorded in accordance with Company requirements.</p><p><strong>Materials &amp; Equipment:</strong> Assist STP in ensuring the location has sufficient stock of parts and materials to perform drilling and associated operations as per contractual requirements. Ensure planned maintenance and repair of drilling equipment including draw-works, mud pumps, top drive, rotary table, and BOP are completed and documented to ensure optimum condition and proper availability of required tools. Responsible for housekeeping standards in all drilling areas, sack store and mud pump room.</p><p><strong>Rig Move:</strong> Support STP in planning all related rigs move activities, equipment, supplies, personnel in compliance with the Rig move Procedures. Assesses the current and new location, considering factors such as safety, lifting equipment availability at location, preparation for rig-up operations, Supervise the Rig move team during rigging down and rigging up activities to ensure they are followed efficiently and safely.</p><p><strong>Client Management:</strong> Develops and maintains positive working relationships with other department heads, supervisors, operator's representatives, subcontractors, and all personnel on the rig. Responds to client requests and needs concerning materials, equipment, and personnel after getting adequate management approval.</p><p><strong>Reporting and Documentation:</strong> Maintains proper logs and records, promptly submitting required reports as per company protocols and regulatory standards. Prepare accurate and timely reports, including daily drilling reports, equipment status reports and incident reports, to document drilling activities and operational performance. Review all operational/technical bulletins, communicate pertinent points to crew members and implement all directives as required. Assist STP in initiating, monitoring, and recording all maintenance and repairs work in collaboration with maintenance department.</p><p><strong>People Management &amp; Development:</strong> Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work. Mentor, develop and train their team to ensure safe and effective operations. Identifies opportunities for skill and career advancement, works to support the professional growth of their team members. Ensure their team receives the necessary required training to perform their duties safely and effectively through on-the-job training, classroom training and participation in safety drills and exercises. Support, promote and actively participate in ADES s Competency Assurance Program for their team. Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive ADVANCE process to formalize a performance management culture.</p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Minimum education level required: High School or Vocational/Technical Qualification. Minimum (8) years of working experience in land drilling and workover operations with contractors with a career history showing time served as Assistant Driller, Driller, and Tool pusher. Must have working experience on Onshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in English (written &amp; spoken). PC literate in Microsoft Office Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids. Leadership, Situation Awareness, Communication, Teamwork, Performance shaping factors stress and fatigue, inspecting work.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat etc.). Ability to work on day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix. Valid Well Control (Well Sharp / IADC) Certificate.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Experience:</strong> Minimum education level required: High School or Vocational/Technical Qualification. Minimum (8) years of working experience in land drilling and workover operations with contractors with a career history showing time served as Assistant Driller, Driller, and Tool pusher. Must have working experience on Onshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in English (written &amp; spoken). PC literate in Microsoft Office Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids. Leadership, Situation Awareness, Communication, Teamwork, Performance shaping factors stress and fatigue, inspecting work.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat etc.). Ability to work on day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix. Valid Well Control (Well Sharp / IADC) Certificate.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br> <b>About the role </b> <p>As a Key Account Manager, you will be responsible for managing key accounts in the assigned territory and work strategically to increase the awareness and create the demand of the company products. They will be responsible for promoting products or group of products to a variety of customers including Hospitals, Infection control, ICUs, and relevant decision makers in hospitals.</p> <p> </p> <p> <b>Job Location: Qatar or Kuwait</b> </p> <b>Main responsibilities will include:</b> <ul> <li> <p>Ensure optimal and continuous product support on the market and in different institutions.</p> </li> <li> <p>Improving the development of existing products and support with new product launches.</p> </li> <li> <p>Achieves sales targets in the designated territory.</p> </li> <li> <p>Builds sustainable positive relationships with target HCPs and different partners.</p> </li> <li> <p>Ensure customer satisfaction. Manage expectations, along with improve and expand market penetration and adoption.</p> </li> <li> <p>Conducts customer segmentation to ensure target customers are approached with the optimal tools and frequency and provided with best-in-class customer service.</p> </li> <li> <p>Maintains the customer database to ensure full understanding of customer needs to be able to timely fulfil them.</p> </li> <li> <p>Conducts ongoing market analysis including market, competitive, and business intelligence.</p> </li> <li> <p>Helps in organizing promotional and educational group meetings, symposia and conferences for doctors and other medical staff, nurses.</p> </li> </ul> <p> </p> <b>About you</b> <ul> <li> <p>Bachelor s degree in healthcare sciences or discipline</p> </li> <li> <p>Relevant experience or exposure in medical devices/technology is key</p> </li> <li> <p>2- 3 years of sales experience from healthcare background</p> </li> <li> <p>Excellent communication and presentation skills</p> </li> <li> <p>Strong customer focus &amp; analytical skills.</p> </li> </ul> <p> </p> <p> </p> <p> </p> Why Join Us? <p>To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of healthcare. At BD, you ll discover a culture in which you can learn, grow and thrive. </p> <p> </p> <p>We believe that when people connect in person, we learn faster, collaborate more deeply, and build a stronger culture. Join us and enjoy a culture where face-to-face collaboration supports your learning, your progress, and your success. </p> <p> </p> <p><br></p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Position Summary</b></p><p>The Equine Veterinarian is responsible for providing comprehensive medical, surgical, and preventive healthcare services for horses. The role includes diagnosing and treating illnesses and injuries, developing herd health programs, ensuring compliance with animal welfare standards, and supporting the performance and well-being of breeding, training, and competition horses.</p><p><b>Key Responsibilities</b></p><p><b>Clinical Care</b></p><ul><li>Perform routine and emergency veterinary examinations.</li><li>Diagnose and treat medical conditions, injuries, and diseases affecting horses.</li><li>Prescribe medications and develop treatment plans.</li><li>Perform minor and major surgical procedures as required.</li><li>Provide emergency and after-hours veterinary care when necessary.</li></ul><p><b>Preventive Medicine</b></p><ul><li>Develop and implement vaccination, deworming, and disease prevention programs.</li><li>Conduct routine health screenings and wellness examinations.</li><li>Monitor biosecurity measures and disease control protocols.</li><li>Advise on nutrition, conditioning, and overall horse health management.</li></ul><p><b>Reproductive Services</b></p><ul><li>Conduct breeding soundness examinations.</li><li>Monitor reproductive health of mares and stallions.</li><li>Perform pregnancy diagnosis and reproductive management procedures.</li><li>Support breeding and foaling programs.</li><li>Emporio operations (fresh/frozen).</li></ul><p>&nbsp;</p><p><b>Diagnostic Services</b></p><ul><li>Collect and interpret laboratory samples and test results.</li><li>Maintain accurate medical records and treatment documentation.</li><li>Monitor recovery and rehabilitation programs.</li></ul><p>&nbsp;</p><p><b>Performance Horse Support</b></p><ul><li>Evaluate horses for fitness and soundness.</li><li>Provide veterinary support for training and competition horses.</li><li>Work closely with trainers, riders, and stable management to optimize horse performance.</li><li>Advise on injury prevention and rehabilitation programs.</li></ul><p><b>Team Collaboration</b></p><ul><li>Coordinate with farriers, trainers, nutritionists, and stable staff.</li><li>Train and educate staff on equine health, first aid, and welfare practices.</li><li>Participate in veterinary rounds and management meetings.</li><li>Provide guidance during emergency situations and disease outbreaks.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications</b></p><p><b>Education</b></p><ul><li>Doctor of Veterinary Medicine (DVM) or equivalent veterinary degree.</li></ul><p><b>Experience</b></p><ul><li>Minimum 3–5 years of equine veterinary experience.</li><li>Experience with performance, breeding, and show horses preferred.</li><li>Experience in diagnostic imaging and equine surgery is an advantage.</li></ul><p><b>Skills &amp; Competencies</b></p><ul><li>Strong diagnostic and clinical decision-making skills.</li><li>Knowledge of equine medicine, surgery, and reproduction.</li><li>Excellent communication and client relationship skills.</li><li>Ability to work independently and under pressure.</li><li>Strong organizational and record-keeping abilities.</li><li>Commitment to animal welfare and professional ethics.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. You’ll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world.</p><br><b>A Day in the Life</b><p>Bring your talents to a leader in medical technology and healthcare solutions.&nbsp; Rooted in our long history of mission-driven innovation, our medical technologies open doors. We support your growth with the training, mentorship, and guidance you need to own your future success.</p><br><p>Atrial fibrillation affects over 33 million individuals worldwide and is the most common form of serious arrhythmia. Being in a fast-growing cardiac ablation business segment and with recent acquisition of the AFFERA™ Mapping and Ablation System, we are poised to provide innovative solutions to address unmet needs for many patients. We are seeking a talented and motivated Affera Mapping Specialist to join our team to further drive the growth of the business.</p><br><p><b>Responsibilities may include the following and other duties may be assigned:</b></p><br><ul><li>Provide proficient clinical and technical assistance to physicians and Electrophysiology Lab Staff on the use of the AFFERA™ Mapping and Ablation System, PFA &amp; Cryo.</li><li>Provide in-service training to introduce new technologies to various hospital stakeholders and ensure technology acceptance.</li><li>Play an active role in the planning and effective installation of the AFFERA™ Mapping and Ablation System and efficiently collaborate with the technical department.</li><li>Work closely with the education team and support the development of training centers.</li><li>Demonstrate excellent ability to plan cases and define priorities to maximize case coverage.</li><li>Ability to manage high-stress situations with a clear problem-solving mindset.</li><li>Ability to travel on weekly basis.</li></ul><p><b>Required Knowledge and Experience:</b></p><br><ul><li>Bachelor's degree required in electrical or medical engineering or related scientific disciplines.</li><li>5+ years of clinical Electrophysiology experience and successful independent support of Electrophysiology mapping procedures.</li><li>Fluency in English and Arabic</li><li>Ability to work well in a cross-functional environment.</li><li>Ability to work in a team and willingness to be flexible and travel as required.</li><li>Independent, self-reliant thinking and acting as well as a sense of responsibility.</li></ul><p><b>Physical Job Requirements</b><br>The above statements are intended to describe the general nature and level of work being performed by employees assigned to this position, but they are not an exhaustive list of all the required responsibilities and skills of this position. </p><br><b>Benefits &amp; Compensation</b><p><b>Medtronic offers a competitive Salary and flexible Benefits Package</b><br>A commitment to our employees lives at the core of our values. We recognize their contributions. They share in the success they help to create.We offer a wide range of benefits, resources, and competitive compensation plans designed to support you at every career and life stage.<br>&nbsp;</p><br><b>About Medtronic</b><p>We lead global healthcare technology and boldly attack the most challenging health problems facing humanity by searching out and finding solutions.<br>Our Mission — to alleviate pain, restore health, and extend life — unites a global team of 95,000+ passionate people.&nbsp;<br>We are engineers at heart— putting ambitious ideas to work to generate real solutions for real people. From the R&amp;D lab, to the factory floor, to the conference room, every one of us experiments, creates, builds, improves and solves. We have the talent, diverse perspectives, and guts to engineer the extraordinary.</p><br><p>Learn more about our business, mission, and our commitment to diversity here &nbsp;<br>&nbsp;</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Primary Responsibilities:</strong></p><ul> <li>Administer and maintain Windows servers, desktops, and laptops as part of the overall systems architecture across multiple networks and locations.</li> <li>Manage users, groups and permissions with Active Directory.</li> <li>Administer and maintain virtual environments (VMware) and physical hosts.</li> <li>Administer and maintain storage devices (NetApp) across multiple locations.</li> <li>Utilize command line tools (PowerShell) to troubleshoot systems hardware, software, and configuration issues.</li> <li>Implement disaster recovery and COOP plans, systems, and operations in coordination with the Network team and other organizations.</li> <li>Basic network troubleshooting in support of the datacenter and workstation/LAN connectivity.</li> <li>Work with teammates as needed to document service structure, network, and server/storage architecture and ensure data security and availability for customers both local and remote.</li> <li>Collect, review, and store server log files to identify and remediate system issues.</li> <li>Document system configurations using Visio, PowerPoint, Word, or other tools and propose, defend, and implement system changes; coordinate &amp; assist cybersecurity personnel with system accreditation efforts.</li> <li>Apply security patches, IAVAs, STIGS, and updates (including operating system updates) for assigned systems.</li> <li>Assist Service Desk technicians as needed with Tier I and Tier II troubleshooting and patching of desktop systems, software (MS Office, Java, Adobe, etc), printers, and server/network related issues.</li> <li>Mentor, lead, and train junior technicians as directed.</li> <li>Participate in or lead special projects and day to day operations as needed or assigned by the site lead, including surging to alternate locations for customer requirements or to backfill personnel.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Basic Qualifications:</strong></p><ul> <li>HS Diploma/GED with 8+ years experience; Associate s Degree with 6+ years experience; Bachelor s Degree with 4+ years experience; or Master s Degree with 2+ years experience</li> <li>Active Top Secret SCI required. </li> <li>Active 8570/8140 IAT II (or higher) Baseline Certification, such as: Security+ ce.</li> <li>Active Computing Environment certification, Associate or higher, such as Azure Administrator Associate (AZ-104), NetApp, etc.</li> <li>Systems administration and/or systems engineering experience.</li> <li>Customer-oriented with excellent oral and written communications skills.</li> <li>Ability to work 12-hour shifts on-site, 7 days per week.</li> <li>On-call availability 24x7, including weekends and holidays.</li> <li>Current U.S. passport with at least 36 months validity and 5 blank pages.</li> <li>Must successfully complete CRC processing and medical screening and be designated fit for deployment (including medical tests and BMI analysis).</li> <li>Must obtain and maintain host nation work visa, including required local/regional medical testing.</li> <li>Must be willing to live and work in the State of Kuwait or deploy to austere forward locations as required.</li> <li>Must comply with all corporate policies, local site policies, host nation laws, customs, and courtesies.</li> </ul><p><strong>Preferred Qualifications:</strong></p><ul> <li>NetApp NCDA, VMWare VCTA, CCNA, CASP, and/or ITIL certification.</li> <li>Experience with US Intelligence networks and organizations in South-West Asia or on a Camp Arifjan service desk a big plus.</li> </ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. You’ll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world.</p><br><b>A Day in the Life</b><p>Bring your talents to a leader in medical technology and healthcare solutions.&nbsp; Rooted in our long history of mission-driven innovation, our medical technologies open doors. We support your growth with the training, mentorship, and guidance you need to own your future success.</p><br><p>We are seeking a highly motivated and results-oriented CRM CAS Sales Lead to support the growth and performance of the business across assigned indirect markets. Reporting directly to the Regional Director, this role will be responsible for driving revenue growth, managing distributor performance, supporting commercial execution, building customer relationships, and expanding market adoption of the CRM/CAS portfolio. The successful candidate will serve as the primary commercial point of contact for distributors and customers while working closely with clinical, marketing, and cross-functional teams to achieve business objectives.</p><br><p><b>Responsibilities may include the following and other duties may be assigned:</b></p><br><ul><li>Drive revenue growth, sales targets, and market share expansion across the CRM/CAS portfolio.</li><li>Set, monitor, and deliver annual, quarterly, and monthly sales objectives through effective territory planning and execution.</li><li>Manage and optimize distributor performance through business planning, target setting, regular business reviews, performance monitoring, and corrective action plans.</li><li>Lead sales forecasting, demand planning, inventory management, and pipeline reviews to ensure product availability and forecast accuracy.</li><li>Develop and execute territory growth plans, pricing strategies, and go-to-market initiatives aligned with business objectives.</li><li>Identify market opportunities and develop strategic initiatives to increase adoption of Electrophysiology therapies and technologies.</li><li>Build and maintain strong relationships with Key Opinion Leaders (KOLs), hospital management, procurement stakeholders, and distributor leadership teams.</li><li>Support customer engagement activities, congress participation, physician education initiatives, and market development programs.</li><li>Partner closely with Clinical Specialists and Therapy Consultants to support technology adoption and customer success.</li><li>Collaborate cross-functionally with marketing, finance, supply chain, regulatory, reimbursement, and clinical teams to ensure successful business execution.</li><li>Maintain deep knowledge of the competitive landscape, market trends, customer needs, and emerging technologies within the Electrophysiology space.</li><li>Ensure compliance with company policies, quality standards, and applicable healthcare regulations.</li></ul><p><b>Required Knowledge and Experience:</b></p><br><ul><li>Bachelor’s degree in Business, Life Sciences, Biomedical Engineering, Healthcare Management, or a related field.</li><li>5+ years of commercial experience within medical devices (CRM/CAS).</li><li>Proven track record of delivering sustainable revenue growth and achieving sales targets.</li><li>Strong experience working with distributor-led business models, territory management, forecasting, demand planning, and inventory management.</li><li>Demonstrated ability to influence stakeholders and drive business performance without direct authority.</li><li>Strong stakeholder management, negotiation, presentation, and communication skills.</li><li>Ability to work effectively in a cross-functional and matrix organization.</li><li>Fluency in English and Arabic.</li><li>Ability to work well in a team environment and collaborate across multiple functions.</li><li>Independent, self-reliant thinking and acting with a strong sense of accountability and ownership.</li><li>Willingness and ability to travel extensively across assigned markets.</li><li>Experience in Electrophysiology, Cardiac Rhythm Management, Cardiac Ablation Solutions, or other cardiovascular therapies.</li><li>Kuwait City, Kuwait or Doha, Qatar</li></ul><p><b>Physical Job Requirements</b><br>The above statements are intended to describe the general nature and level of work being performed by employees assigned to this position, but they are not an exhaustive list of all the required responsibilities and skills of this position. </p><br><b>Benefits &amp; Compensation</b><p><b>Medtronic offers a competitive Salary and flexible Benefits Package</b><br>A commitment to our employees lives at the core of our values. We recognize their contributions. They share in the success they help to create.We offer a wide range of benefits, resources, and competitive compensation plans designed to support you at every career and life stage.<br>&nbsp;</p><br><b>About Medtronic</b><p>We lead global healthcare technology and boldly attack the most challenging health problems facing humanity by searching out and finding solutions.<br>Our Mission — to alleviate pain, restore health, and extend life — unites a global team of 95,000+ passionate people.&nbsp;<br>We are engineers at heart— putting ambitious ideas to work to generate real solutions for real people. From the R&amp;D lab, to the factory floor, to the conference room, every one of us experiments, creates, builds, improves and solves. We have the talent, diverse perspectives, and guts to engineer the extraordinary.</p><br><p>Learn more about our business, mission, and our commitment to diversity here &nbsp;<br>&nbsp;</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Onshore, Kuwait We are seeking an experienced Wellsite Geologist to join our team on an onshore project in the Middle East. This is a critical, on-site role responsible for delivering safe, efficient, and technically sound geological operations that support real-time decision-making and optimize well delivery. As the on-site geological authority, you will work closely with drilling, subsurface, and service teams to ensure accurate data acquisition, sound interpretation, and effective execution of the well programme. Key Responsibilities Act as the primary geological representative at the wellsite, providing real-time interpretation of geological data and early identification of drilling hazards. Ensure the quality, accuracy, and integrity of all geological data collected at the wellsite. Maintain clear, timely communication and data transfer between the rig site and onshore/office-based teams. Monitor lithology, formation tops, and drilling parameters to support casing/coring point decisions. Contribute to end-of-well reports, post-well analysis, and lessons-learned initiatives to drive continuous improvement. Ensure full compliance with company operational procedures, HSE standards, and industry best practices. Liaise with mud loggers, directional drillers, and other service providers to ensure integrated, high-quality operations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>University degree in Geology, Earth Sciences, or a related discipline.</li><li>Proven wellsite experience across both carbonate and clastic formations.</li><li>Working experience with Techlog / Petrel software.</li><li>Demonstrated skill in real-time pore pressure prediction (RTPP), with working knowledge of relevant RTPP software suites.</li><li>Strong understanding of drilling hazards (e.g., overpressure, wellbore instability, fluid losses) and their geological indicators.</li><li>Familiarity with LWD/MWD/ wireline data interpretation.</li><li>Excellent communication skills, with the ability to convey technical information clearly to multidisciplinary teams under time pressure.</li><li>Willingness and ability to work on an onshore rig-based rotation in Kuwait.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Teach within a well established British curriculum framework, delivering engaging and high quality learning to motivated secondary students.</p> <p>Become part of a diverse, international teaching community that values collaboration, professional respect, and shared success.</p> <p>Benefit from modern classrooms and well equipped facilities that support innovative and inspiring teaching practices.</p> <p>Access excellent professional development opportunities, with ongoing training and clear pathways for career growth.</p> <p>Experience life in Kuwait, a safe and welcoming country offering a blend of modern comforts and rich cultural heritage.</p> <p>Enjoy a competitive salary and benefits package, including accommodation, medical insurance, and annual flights.</p> <p>Make a meaningful impact by helping students develop confidence, character, and academic excellence.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b style="font-size: 11px;">The school</b></p> <p><span><span><span>A British curriculum institution in Kuwait that provides a modern, inclusive learning environment where students are encouraged to achieve academically while developing strong character and values. The school emphasises confidence, curiosity, and responsibility, ensuring that learners feel secure, motivated, and inspired to reach their full potential. With high standards of conduct, supportive staff, and well-equipped facilities, it prepares young people to thrive both in education and in life beyond the classroom.</span></span></span></p> <p><span><span><span><b>Job highlights</b></span></span></span></p> <ul> <li><span><span><span>Teach within a well established British curriculum framework, delivering engaging and high quality learning to motivated secondary students.</span></span></span></li> <li><span><span><span>Become part of a diverse, international teaching community that values collaboration, professional respect, and shared success.</span></span></span></li> <li><span><span><span>Benefit from modern classrooms and well equipped facilities that support innovative and inspiring teaching practices.</span></span></span></li> <li><span><span><span>Access excellent professional development opportunities, with ongoing training and clear pathways for career growth.</span></span></span></li> <li><span><span><span>Experience life in Kuwait, a safe and welcoming country offering a blend of modern comforts and rich cultural heritage.</span></span></span></li> <li><span><span><span>Enjoy a competitive salary and benefits package, including accommodation, medical insurance, and annual flights.</span></span></span></li> <li><span><span><span>Make a meaningful impact by helping students develop confidence, character, and academic excellence.</span></span></span></li> </ul> <p><span><span><span><b>The ideal candidate</b></span></span></span></p> <ul> <li><span><span><span><span>BEd /</span>Degree or a relevant Degree with PGCE in Geography</span></span></span></li> <li><span><span><span><span>Qualified /</span>Teacher Status (QTS)</span></span></span></li> <li><span><span><span><span>2 5 /</span>years of proven teaching experience in Geography</span></span></span></li> <li><span><span><span><span>Strong /</span>subject expertise and curriculum knowledge</span></span></span></li> <li><span><span><span><span>Experience /</span>teaching GCSE s as well as A-level would be to your advantage</span></span></span></li> <li><span><span><span><span>Ability /</span>to create a positive, inclusive, and engaging classroom environment</span></span></span></li> <li><span><span>Adaptability and cultural awareness in an international setting</span></span></li> <li><span><span>Enthusiastic, energetic, and student focused mindset</span></span></li> </ul> <p><span><span><span><b>Facts &amp; Figures</b></span></span></span></p> <ul> <li><span><span><span>Location: Kuwait</span></span></span></li> <li><span><span><span>Job type: Contract</span></span></span></li> <li><span><span><span>Duration: 1-year (renewable)</span></span></span></li> <li><span><span><span>Salary range: Tax free salary depending on experience</span></span></span></li> <li><span><span><span>Benefits: Annual return flights, medical insurance, fully furnished apartment, end of service gratuity payment</span></span></span></li> </ul><p></p></section>

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p>A valid (FAA) A&P Airframe and Powerplant Certificate is required.</p> <p>Seven (7) years’ experience as an (A&P) mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</p> <p>US citizenship is required to obtain a US government secret security clearance and for facility access.</p> <p>Operationally checks repaired or modified systems for proper operation.</p> <p>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</p> <p>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p> <p>Examine engines for oil leaks and listen to operating engines to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.</p> <p>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</p> <p>Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.</p> <p>Disassemble and inspect parts for wear, warping, or other defects.</p> <p>Repair or replace defective engine parts and reassemble and install engine in aircraft.</p> <p>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</p> <p>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</p> <p>Knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</p> <p>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</p> <p>Ability to read, write, and interpret technical duties is required.</p> <p>Ability to communicate effectively with all levels of employees throughout the organization.</p> <p>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid (FAA) A&P Certificate is required.</li> <li>Seven (7) years’ experience as an (A&P) mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul & inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel to Kuwait; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain Kuwait visa.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment. Ability to clear the Army MOD 17 medical is required for deployment to Kuwait and will occur while attending CRC (DIDC) deployment training.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li> </ul> <h4>Mechanic Pre-employment Medical Requirements (AR95-20)</h4> <p>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</p> <h4>Security Clearance Requirements</h4> <p>Must be able to obtain and maintain a US government secret security clearance. Must be able to obtain and maintain facility credentials and authorization. US citizenship is required to hold a US government secret clearance and facility credentials and authorization to work at this facility.</p> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Compensation Details</h4> <p>41.89</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits Overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional Information</h4> <p>Original Posting: 06/05/2026 - Until Filled</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an Equal Opportunity Employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job summary</h4> <p>The C-12/King Air Army transport aircraft mechanic (FAA A&P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p>A valid (FAA) A&P Airframe and Powerplant certificate is required.</p> <p>Seven (7) years’ experience as an (A&P) mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</p> <p>US citizenship is required to obtain a US government secret security clearance, and for facility access.</p> <h4>Responsibilities</h4> <ul> <li>Operationally checks repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engine to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li> <li>Knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid (FAA) A&P certificate is required.</li> <li>Seven (7) years’ experience as an (A&P) mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance, on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with personal identification. (Company will ship toolbox to Kuwait).</li> <li>A valid US passport is required for deployment/travel to Kuwait; passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait visa.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment. Ability to clear the Army MOD 17 medical is required for deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li> <li>(AR95-20) Mechanic pre-employment medical requirements: Medical/physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</li> <li>Security clearance requirements: Must be able to obtain and maintain a US government secret security clearance. Must be able to obtain and maintain facility credentials and authorization. US citizenship is required to hold a US government secret clearance, and facility credentials and authorization to work at this facility.</li> </ul> <h4>Physical and additional qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Must be able to distinguish color and judge three dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Compensation details</h4> <p>41.89 per hour (estimated)</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions and benefits.</p> <h4>Additional information</h4> <p>Original posting date: 06/09/2026 - until filled</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity employer statement</h4> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.<br> Inspects, instructs, services and certifies individual and crew equipment.<br> Order, receive and inventory kits and components.<br> Resolve shipping discrepancies.<br> Ensure proper fit of crew member clothing.<br> Maintain ALSE and NVD for DoS and DI personnel.<br> Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals.<br> Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment.<br> Perform other duties as assigned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required.<br> One (1) year verifiable experience as an ALSE technician.<br> Must possess a certificate of training as a school trained ALSE technician.<br> Valid US passport (minimum 2.5 years validity) required for deployment to Germany.<br> Ability to obtain and maintain a US government security clearance, NAC-I T1 public trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br> Must meet and be able to pass CENTCOM medical requirements prior to deployment.<br> Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait visa.</p> <h4>Knowledge & skills</h4> <ul> <li>CMF 92 supply & services MOS series or other military/commercial equivalent (92R MOS preferred).</li> <li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation.</li> <li>Must be able to ascertain LSE requirements for a multi-type aircraft environment.</li> <li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures.</li> <li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures.</li> <li>Must have knowledge of aviation maintenance data systems and associated documentation/forms.</li> <li>Must have knowledge of life support equipment maintenance tools and tool control procedures.</li> <li>Must be knowledgeable of principles of instruction.</li> <li>Must have knowledge of seat kit survival components.</li> <li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance.</li> <li>The ability to obtain and maintain a moderate risk public trust (MRPT) through Department of State background investigation is a condition of continued employment.</li> <li>Must possess or have the ability to obtain a U.S. passport before assignment, including renewal and additional pages if applicable.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day.</li> <li>Must be able to climb stairs, ramps, ladders and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push or pull up to 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>Must be able to communicate by voice and detect sounds.</li> <li>Must be able to distinguish color and judge three dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet.</li> <li>Be able to travel to and between remote location(s).</li> <li>Travel to austere or inhospitable high stress environments may be required.</li> <li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft.</li> <li>Will be exposed to surface obstructions (ladders, stairs, etc.).</li> <li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Aviation Life Support Equipment (ALSE) Technician serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices. Principal Accountabilities Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications. Inspects, instructs, services and certifies individual and crew equipment Order, receive and inventory kits and components Resolve shipping discrepancies Ensure proper fit of crew member clothing Maintain ALSE and NVD for DoS and DI personnel Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment Perform other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma or equivalent is required.</li><li>One (1) year verifiable experience as an ALSE technician.</li><li>Must possess a certificate of training as a school trained ALSE Technician.</li><li>Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.</li><li>Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.</li></ul><p>Knowledge &amp; Skills</p><ul><li>CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred)</li><li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation</li><li>Must be able to ascertain LSE requirements for a multi-type aircraft environment</li><li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures</li><li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures</li><li>Must have knowledge of aviation maintenance data systems and associated documentation/forms</li><li>Must have knowledge of life support equipment maintenance tools and tool control procedures</li><li>Must knowledgeable of principles of instruction</li><li>Must have knowledge of seat kit survival components</li><li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance</li><li>The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment</li><li>Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day</li><li>Must be able to climb stairs, ramps, and ladders and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to carry, push or pull up to 50 pounds</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet</li><li>Must be able to communicate by voice and detect sounds</li><li>Must be able to distinguish color and judge three dimensional depths</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet</li><li>Be able to travel to and between remote location(s)</li><li>Travel to austere or inhospitable high stress environments may be required</li><li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required</li><li>May be exposed to extreme noise from turbine and jet engine aircraft</li><li>May be exposed to fumes or airborne particles</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft</li><li>Will be exposed to surface obstructions (ladders, stairs, etc)</li><li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Join us in our mission to transform the way people shop and eat, where impact, innovation, and growth drives everything we do. Our Commercial team sits at the centre of Deliveroo s marketplace shaping how we serve restaurants, grocers, and new verticals worldwide. From negotiating key partnerships to unlocking new revenue streams and crafting data-led growth strategies, we take on big challenges that move the business forward. If you thrive in fast-paced, commercial environments and want to influence the future of a global brand this is the team for you. We re looking for an SMB Account Manager to join our Kuwait team. In this role, you ll help us empower small and medium-sized restaurant partners to thrive on our platform, driving their core business performance and operational excellence. Get to know our Commercial team what drives us, how we work, and what you can expect. What You ll Be Doing You ll be joining the SMB (Small to Medium Business) team. We are the dedicated partners for the heartbeat of our marketplace the local, independent restaurants. We focus on scaling growth and building long-term value for thousands of partners simultaneously. Here s what your day-to-day might look like:</p><ul><li>Portfolio Ownership: Manage a large portfolio of SMB partners, acting as their primary representative and ensuring they receive world-class service to build lasting partnerships.</li><li>Strategic Growth: Negotiate and develop long-term account plans, focusing on renewals, extensions, and the launch of new products or advertising revenue streams.</li><li>Performance Campaigns: Execute targeted campaigns to improve key metrics, including restaurant retention, customer outcomes, and overall operational efficiency.</li><li>Data-Driven Consultation: Use data to identify inefficiencies and growth opportunities, proactively advising partners on how to unlock better value and accelerate revenue.</li><li>Omnichannel Engagement: Support your partners through a mix of high-impact communication methods, including voice, video, email, and strategic site visits.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>What You ll Need to Thrive Our ideal candidate will bring strong expertise in some of these areas and curiosity to grow in others:</p><ul><li>Commercial Relationship Management: Significant experience in an Account Management or similar commercial role, with a proven track record of producing tangible business results.</li><li>Bilingual Communication: Full professional fluency in both English and Arabic is essential for this role.</li><li>Negotiation &amp; Influence: Strong ability to handle complex negotiations and manage diverse stakeholders with resilience and maturity.</li><li>Analytical Problem Solving: A solution-oriented mindset with a strong understanding of Excel or Google Sheets to back your decision-making with data.</li><li>Self-Starter Mentality: Highly organised and proactive, with the get it done mindset required to thrive in a fast-paced, evolving marketplace.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Responsible to deliver exceptional support, customer service, and training for Mohamed Naser Al – Hajery &amp; Sons Medical Equipment to ensure client success in the utilization of MNH medical devices, while complying with Mohamed Naser Al – Hajery &amp; Sons Policies and Procedures.&nbsp;</p><p><br></p><p>Implement the LCS Department’s set policies and procedures and comply with the Mohamed Naser Al – Hajery &amp; Sons other policies.</p><p><br></p><p><b>Product Expertise</b>&nbsp;</p><p><br></p><ul><li>Develop and maintain in-depth knowledge of our dialysis machines and related products.&nbsp;</li><li>Stay informed about product updates, new features, and advancements in dialysis technology.&nbsp;</li><li>Installation and Configuration:&nbsp;</li><li>Provide on-site and remote assistance in the installation and configuration of dialysis machines at healthcare facilities.&nbsp;</li><li>Collaborate with the sales and technical teams to ensure a smooth and efficient implementation process.&nbsp;</li></ul><p><br></p><p><b>Training and Education</b>&nbsp;</p><p><br></p><ul><li>Conduct training sessions for healthcare professionals, including nurses, technicians, and physicians, on the proper use and maintenance of dialysis equipment.&nbsp;</li><li>Develop training materials and documentation to support educational initiatives.&nbsp;</li></ul><p><br></p><p><b>Technical Support</b>&nbsp;</p><p><br></p><ul><li>Serve as a point of contact for customers experiencing technical issues with our dialysis machines.&nbsp;</li><li>Diagnose and troubleshoot hardware and software issues, providing timely and effective solutions.&nbsp;</li><li>Collaborate with the engineering and product development teams to address complex technical issues.</li></ul><p><br></p><p><b>Customer Relationship Management</b>&nbsp;</p><p><br></p><ul><li>Build and maintain strong relationships with healthcare professionals, ensuring customer satisfaction and loyalty.&nbsp;</li><li>Gather feedback from customers to identify opportunities for product improvement and development.&nbsp;</li></ul><p><br></p><p><b>Product Demonstrations</b>&nbsp;</p><p><br></p><ul><li>Conduct product demonstrations for potential customers, showcasing the features and benefits of our dialysis machines.&nbsp;</li><li>Collaborate with the sales team during pre-sales activities to address technical queries and concerns.&nbsp;</li></ul><p><br></p><p><br></p><p><b>Documentation</b>&nbsp;</p><p><br></p><ul><li>Create and update technical documentation, user manuals, and troubleshooting guides for our dialysis machines.&nbsp;</li><li>Ensure documentation is clear, concise, and aligned with industry standards.&nbsp;</li></ul><p>&nbsp;</p><p><b>Quality Assurance</b>&nbsp;</p><p><br></p><ul><li>Participate in quality assurance processes, including testing new product releases and providing feedback to the development team.&nbsp;</li><li>Assist in the development and execution of test plans and validation protocols.&nbsp;</li></ul><p><br></p><p><br></p><p><b>Prepare and submit reports to the LCS Management on a regular basis.&nbsp;</b></p><p><br></p><p><br></p><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor’s degree in nursing/biomedical engineering or equivalent.</li><li>Experience in operating or providing support for dialysis units.&nbsp;</li><li>Minimum of 2–4 years of experience in the same or related field.&nbsp;</li><li>Accountability&nbsp;</li><li>Attention to detail&nbsp;</li><li>Time management&nbsp;</li><li>Communication skills&nbsp;</li><li>Interpersonal skills&nbsp;</li><li>Teamwork and collaboration&nbsp;</li><li>Proficiency in English and Arabic languages.&nbsp;</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><b>Position Summary / Purpose</b></span></p><br><br><p>At GSK, we unite science, technology and talent to get ahead of disease together. As a Specialty Account Manager for Kuwait and Oman, you will build strong partnerships with healthcare professionals (HCPs) and key accounts to deliver tailored, patient-focused solutions and drive sustainable business growth in line with GSK’s values and Ahead Together strategy.</p><br><br><br><p><span><b>Key Responsibilities</b></span></p><br><br><p>In this role, you will:</p><br><br><ul><li>Build and maintain effective partnerships with HCPs and key accounts to drive awareness and appropriate use of GSK’s solutions, in line with GSK policies and ethical standards.</li><li>Develop and execute a territory business plan aligned with GSK’s commercial strategy to achieve agreed objectives.</li><li>Collaborate with cross-functional teams (e.g. marketing, medical, market access) to implement tailored account solutions that address patient and customer needs.</li><li>Monitor performance and market trends within your territory and recommend data-driven actions to capture opportunities and address challenges.</li><li>Coordinate with supply chain and commercial teams to support demand forecasting and help ensure product availability for customers.</li><li>Conduct regular external meetings and educational activities with HCPs focused on disease awareness and patient-centric solutions, fully compliant with GSK’s Code and local regulations.</li></ul><br><p><span><b>Basic Qualifications / Requirements</b></span></p><br><br><p>To be considered for this role, you must have:</p><br><br><ul><li>Bachelor’s degree in pharmacy, Medical Sciences, or a closely related field.</li><li>Minimum 3 years of pharmaceutical sales or account management experience with a demonstrable record of achieving objectives.</li><li>Strong communication skills in Arabic and English.</li><li>Readiness and ability to travel frequently across Kuwait and Oman.</li><li>Valid residency in Kuwait.</li></ul><br><p><span><b>Preferred Qualifications</b></span></p><br><br><p>The following will be an advantage:</p><br><br><ul><li>Recent experience in specialty care and/or respiratory or related therapeutic areas in Kuwait and/or Oman.</li><li>Strong understanding of the healthcare landscape, stakeholders and access dynamics in Kuwait and Oman.</li><li>Strong organizational and analytical skills to manage multiple priorities and deliver results.</li><li>Demonstrated ability to work effectively in cross-functional teams and adapt in a dynamic environment.</li><li>Proactive approach to continuous learning and knowledge sharing.</li><li>Fluency in any additional language relevant to the Kuwait / Oman healthcare market.</li></ul><br><p><span><b>Work Environment</b></span></p><br><br><ul><li>Field-based role covering Kuwait and Oman.</li><li>Frequent travel across the assigned territory is required.</li></ul><br><br><p><i>GSK is an Equal Opportunity Employer. This ensures that all qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), military service or any basis prohibited under federal, state or local law.</i></p><br><br><br><br><p><b>Why GSK?<br>Uniting science, technology and talent to get ahead of disease together.</b></p><br><br><br><p>GSK is a global biopharma company with a purpose to unite science, technology and talent to get ahead of disease together. We aim to positively impact the health of 2.5 billion people by the end of the decade, as a successful, growing company where people can thrive. We get ahead of disease by preventing and treating it with innovation in specialty medicines and vaccines. We focus on four therapeutic areas: respiratory, immunology and inflammation; oncology; HIV; and infectious diseases – to impact health at scale.</p><br><br><br><p>People and patients around the world count on the medicines and vaccines we make, so we’re committed to creating an environment where our people can thrive and focus on what matters most. Our culture of being ambitious for patients, accountable for impact and doing the right thing is the foundation for how, together, we deliver for patients, shareholders and our people.</p><br><br><br><p><b>Contact information:</b><br>You may apply for this position online by selecting the <b>Apply now</b> button.</p><br><br><br><p><b>Important notice to Employment businesses/ Agencies</b></p><br><br><p>GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>OPPORTUNITIES IN KUWAIT AUGUST 2026 SECONDARY SCIENCE TEACHERS Fixed and Floating Positions Available Note about Float Positions Due to their size and diverse needs, this school hires several ‘float’ teachers, in anticipation of new classes opening up due to expansion and/or reallocation of teachers. Float teachers may not initially have an assigned class, and will instead act as in house substitutes and/or learning support and/or administrative support until a class opens up. This means that they may have low contact time at first. When a suitable class becomes available they have the benefit of knowing the school, the children and the culture so it’s a good opportunity for teachers to ease their way into international teaching while getting a full teacher’s salary and benefits throughout their employment, regardless of their day to day assignment. We think it's an excellent opportunity for flexible and adaptable teachers who might want a bit more time to settle in. Passport holders from the USA / Canada / UK / Eire / NZ / AUS / SA New graduates (newly qualified teachers) are welcome to apply. Unqualified teachers are also welcome but the salary will be lower. This American curriculum school group located in Kuwait is looking for engaging and energetic educators to join their team. The right personality is a prime consideration embracing a willingness to work in a local environment in which most of the children speak English as a second language and cultural sensitivity is a must. Benefits include: Monthly tax free salary starting from KD773 Free single accommodation Paid utility bills Annual flights Medical insurance Baggage allowance Benefits for dependents: flight and medical insurance for 2 dependents and 2 free school places The school is located on three campuses and offers an American-style education for students from pre-school to Grade 12. 99% of students are local Kuwaiti nationals and from Grade 1 the children are separated by gender. The school is fully accredited by CIS and the Middle States Association of Colleges and Schools (MSA).</span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p><p>Operationally checks repaired or modified systems for proper operation.</p><p>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</p><p>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.</p><p>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</p><p>Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.</p><p>Disassemble and inspect parts for wear, warping, or other defects.</p><p>Repair or replace defective engine parts and reassembles and installs engine in aircraft.</p><p>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</p><p>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</p><p>Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.</p><p>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</p><p>Ability to read, write, and interpret technical duties is required.</p><p>Ability to communicate effectively with all levels of employees throughout the organization.</p><p>May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.</p><p>Perform other qualified duties as assigned.</p><p>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</p><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to climb stairs, ramps, ladders and work stands.</p><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>May be required to carry, push or pull up to and may exceed 50 pounds.</p><p>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</p><p>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</p><p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>Must be able to distinguish color and judge three dimensional depths.</p><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</p><p>Must have minimum 20/100 near and far vision, correctable to 20/20.</p><p>Must be capable of living and working in a potentially hostile environment for an extended period.</p><p>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</p><p>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</p><p>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</p><p>Minimum Requirements</p><p>High school diploma or GED equivalent is Required.</p><p>A valid (FAA) A&amp;P Certificate is Required.</p><p>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</p><p>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</p><p>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</p><p>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</p><p>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</p><p>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait).</p><p>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</p><p>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</p><p>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20)</p><p>Mechanic Pre-employment Medical Requirements:</p><p>Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</p><p>Security Clearance Requirements:</p><p>Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>New Osler Co. is seeking a dynamic professional to bridge the gap between advanced medical technology and clinical excellence. Whether you are a Dentist looking to transition into the corporate sector or a Biomedical Engineer with a passion for sales, this role offers a unique opportunity to empower dental professionals with cutting-edge solutions.</p><p><br></p><p><b>Key Responsibilities:</b></p><p><br></p><ul><li><b>Strategic Market Growth:</b> Develop and execute innovative sales strategies to expand our footprint within the dental market.</li><li><b>Relationship Management:</b> Cultivate and sustain long-term partnerships with dental practitioners, clinics, and key industry suppliers.</li><li><b>Technical Consultation:</b> Deliver high-impact product demonstrations and provide expert technical consultations to help clients make informed decisions.</li><li><b>Clinical Support &amp; Training:</b> Act as a technical lead by providing comprehensive training and ongoing support for the proper utilization and maintenance of equipment.</li><li><b>Market Intelligence:</b> Monitor industry trends and competitor landscapes to provide actionable feedback for product development.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li><b>Education</b>: Bachelor’s degree in Dentistry or Biomedical Engineering.</li><li><b>Experience</b>: Prior experience in medical or dental sales is highly preferred (but not mandatory for the right candidate).</li><li><b>Technical Expertise:</b> Strong understanding of biomedical equipment and its specific applications in the dental field.</li><li><b>Communication:</b> Excellent presentation and interpersonal skills, with the ability to communicate complex technical concepts clearly.</li><li><b>Mindset:</b> Self-motivated, goal-oriented, and capable of working independently to achieve targets.</li><li><b>Problem Solving</b>: Proven ability to understand customer needs and recommend tailored technical solutions.</li><li><b>Passion</b>: A genuine interest in dental technology and a commitment to exceptional customer service.</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As Regional Installation Specialist you will mainly operate within Kuwait and beyond, and will be accountable for the relocation and de-installation of legacy Serum Work Area (SWA) systems, and the installation of new generation platforms (cobas pro, cobas pure and cobas smart e) for existing customers, in order to achieve a high level of service excellence within the Middle East region. Your core purpose is to successfully accelerate the PiPo program (Phase-in Phase-out) by bridging temporary capacity gaps during installation peaks.</p><p><b>Your Responsibilities</b></p><ul><li>Installation/relocation/de-installation of analytical laboratory instruments of Roche Diagnostics.</li><li>Technical release of analytical systems for laboratory use.</li><li>Focus on preparations of the customer sites that require additional attention based on the continuous increase of customer demands and specifications of the instruments that we deliver.</li><li>Independently analyze and resolve most questions and problems and refer only the most complex issues to higher levels.</li><li>Timely and accurate logging of data according to work instructions and agreements, with regard to activities in the CRM system.</li><li>Ensure all activities are documented in a manner compliant and keeping records in accordance with the company s applicable procedures.</li><li>Timely performance of tasks, maintaining order in the workplace as well as the most effective use of working time.</li><li>Continuous improvement of professional qualifications and participation in company meetings and trainings as well as all forms of vocational education organized by the Employer.</li><li>Actively gathering information in preparation for meetings, delivering an active part in these meetings and give feedback of outcome of these meetings to others</li><li>Develop and monitor local reports and documents to ensure the efficient and productive delivery of services.</li><li>Actively monitor costs for own Service activities</li><li>Awareness of new service bulletins, Global Customer Support (GCS) hot news and other forums</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>You are someone who wants to influence your own development. You are looking for a company where you have the opportunity to pursue your interests across functions and geographies. Where a job title is not considered the final definition of who you are, but the starting point.</p><p>You obtained a BSc degree in Bio-Medical Engineering, Precision Mechanics, Electronics, Information Technology, Medical Technology or related</p><p>You built 1 year of work experience in a related field. We also welcome fresh graduates to apply</p><p>You have basic knowledge of electronics, electro-mechanical systems, information technology, and networking</p><p>You have excellent analytical, problem analysis and decision-making skills</p><p>Effective planning, organizational and time management skills</p><p>Effective customer service, written/verbal communication, organization and prioritization skills</p><p>Fluent verbal and written communication skills in English. Mastering Arabic language will be preferred</p><p>Important note: Depending on the workload there will be a need for frequent traveling to neighboring countries in the Middle East to support the PiPo program but Kuwait being the first priority. You are expected to be flexible and willing to travel outside of Kuwait for those periods of time.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Description</b></p><p>This role supports physicians during consultations and procedures while safely performing treatments like lasers, chemical peels, and microneedling. You handle end to end patient care, including taking medical histories, giving medications, and guiding patients on pre- and post-treatment care. Additionally, you will ensure safety and compliance by keeping accurate medical records, maintaining clean treatment rooms, and monitoring patient recovery.</p><p><br></p><p>Role &amp; Responsibilities:</p><ul><li><b>Clinical support: </b>Assist physicians during dermatological consultations, minor surgical procedures, and cosmetic treatments, ensuring patient comfort and safety throughout.</li><li><b>Aesthetic treatments: </b>Perform and support aesthetic procedures within scope of practice and clinic protocols including laser and IPL treatments, chemical peels, microneedling, hydra facials, mesotherapy, and skin analysis; assist with injectable procedures (botulinum toxin, dermal fillers) as delegated and supervised. (A plus)</li><li><b>Procedure preparation:</b> Prepare treatment rooms, sterilise and set up instruments, verify equipment calibration, and ensure all consumables and emergency supplies are stocked and in date.</li><li>Patient care: Take patient histories, document skin conditions, complete consent forms, and provide clear pre-treatment instructions and post-treatment aftercare guidance.</li><li><b>Medication &amp; monitoring: </b>Administer medications and topical agents as prescribed, and monitor patients for adverse reactions, escalating any complications to the supervising physician promptly.</li><li><b>Documentation: </b>Maintain accurate, confidential electronic patient records, treatment logs, and photographic documentation of results.</li><li><b>Safety &amp; compliance: </b>Adhere to infection-control, health-and-safety, and clinical-governance standards; participate in audits and equipment maintenance schedules.</li><li><b>Patient education: </b>Educate patients on skincare regimens and recommend appropriate products and follow-up treatments in line with their care plan.</li><li><b>Stock control: </b>Support inventory management of medical and cosmetic stock, flagging reorder needs to the clinical lead.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>What we offer</b></p><p>In addition to a competitive tax-free salary and excellent benefits, you'll work in a professional, collaborative environment with a diverse team and numerous opportunities. Our client offers a rewarding career experience and is excited to connect with individuals seeking new challenges.</p><p><b>Who you are</b></p><p>You are a dedicated nurse with excellent communication skills and good knowledge of cosmetic dermatology procedures. You understand patients’ needs and expectations, provide high-quality care, and stay updated with the latest aesthetic technologies and treatments.</p><p><br></p><p>Skills &amp; Competencies:</p><ul><li>Hands-on experience with laser/IPL, injectables, and energy-based treatments</li><li>Knowledge of skin types, dermatological conditions, and cosmeceuticals</li><li>Calm, reassuring, and discreet bedside manner</li><li>Skilled in assisting with aesthetic procedures</li><li>Strong attention to detail and clinical safety</li><li>Excellent patient care and communication skills</li><li>Professional appearance and positive attitude</li><li>Able to work in a fast-paced, team-oriented environment</li><li>Commitment to continuous learning and new technologies</li></ul><p>Education &amp; Qualifications:</p><ul><li>Bachelor’s degree or diploma in Nursing</li><li>Valid nursing license in Kuwait</li><li>Minimum 2 years’ post-qualification experience, including 1 year in dermatology/aesthetics</li><li>BLS certification</li><li>Experience with EMR and clinic management systems</li><li>Certification/training in aesthetic or cosmetic procedures</li><li>Able to assist doctors with injectable and aesthetic procedures</li></ul><p><br></p></div>