وظائف ذوي الاحتياجات الخاصة في الكويت

<p><h4>Principal accountabilities</h4> <p>Typical duties include the following, although specific duties vary by assignment or contract.</p> <ul> <li>Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule.</li> <li>Ensures construction adheres to construction specifications.</li> <li>Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc.). Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required.</li> <li>Logs, references, distributes, and files all related correspondence, drawings, and documents.</li> <li>Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned).</li> <li>Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and standard operating procedures for security, safety, environmental controls, hazardous materials and underground utilities.</li> <li>Visits construction sites and submits required construction reports to monitor progress against schedule and timelines.</li> <li>Cooperates with visiting government and department of defense personnel conducting official inspection visits and surveys and participates in their briefing or orientation.</li> <li>Provides leadership, mentoring, and professional development to assigned staff.</li> <li>Manages the work of teams to procure and construct work.</li> <li>Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion.</li> <li>Attends meetings as required including design and construction reviews and construction kickoff meetings.</li> <li>Performs other qualified duties as assigned.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of cost controls, contractual and project management of international construction projects.</li> <li>Shall also be versed in the International Building Code, NFPA fire codes and the NEC in addition to general construction practices.</li> <li>Knowledge of construction materials, processes, techniques, and methods.</li> <li>Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations.</li> <li>Knowledge of Service Contract Act and Truth in Negotiations Act.</li> <li>Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract.</li> <li>Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA).</li> <li>Knowledge of accounting practices including disclosed accounting practices.</li> <li>Effective leadership and interpersonal skills.</li> <li>Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps, forward operating bases, and major civil projects.</li> <li>Excellent communication and organizational skills are essential.</li> <li>Able to use project and construction management planning and reporting tools such as Microsoft Project and Primavera.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or equivalent.</li> <li>Bachelor’s degree in engineering, construction technology, or construction management (preferred).</li> <li>Must be able to obtain and maintain a secret clearance; note US citizenship is required to obtain a secret clearance.</li> <li>Minimum seven years of construction field experience in all phases of civil and building construction or a two-year associate degree in construction management or related field and five years of field experience.</li> <li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li> <li>Experience in civil and structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li> <li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA fire codes, British Standard (BS) electrical code, and the National Electric Code (NEC) in addition to general construction practices.</li> <li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time and cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li> <li>An Engineer in Training (EIT) or professional certification/project management certification is desired.</li> <li>Additional knowledge and skills may be required by contract or assignment.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Works in a normal office environment with controlled temperature and lighting conditions.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - The company enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his or her quality management and customer satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to the job.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>Typical duties include the following, although specific duties vary by assignment or contract.</p> <ul> <li>Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule.</li> <li>Ensures construction adheres to construction specifications.</li> <li>Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc.). Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required.</li> <li>Logs, references, distributes, and files all related correspondence, drawings, and documents.</li> <li>Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned).</li> <li>Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and SOPs for security, safety, environmental controls, hazardous materials and underground utilities.</li> <li>Visits construction sites and submits required construction reports to monitor progress against schedule/timelines.</li> <li>Cooperates with visiting government and DI personnel conducting official inspection visits and surveys and participates in their briefing or orientation.</li> <li>Provides leadership, mentoring, and professional development to assigned staff.</li> <li>Manages the work of teams to procure and construct work.</li> <li>Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion.</li> <li>Attends meetings as required including design and construction reviews and construction kickoff meetings.</li> <li>Performs other qualified duties as assigned.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of cost controls, contractual and project management of international construction projects.</li> <li>Shall also be versed in the International Building Code, NFPA Fire Codes and the NEC in addition to general construction practices.</li> <li>Knowledge of construction materials, processes, techniques, and methods.</li> <li>Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations.</li> <li>Knowledge of Service Contract Act and Truth in Negotiations Act.</li> <li>Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract.</li> <li>Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA).</li> <li>Knowledge of accounting practices including DynCorp’s disclosed accounting practices.</li> <li>Effective leadership and interpersonal skills.</li> <li>Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps forward operating bases, and major civil projects.</li> <li>Excellent communication and organizational skills are essential.</li> <li>Able to use project and construction management planning and reporting tools such as Microsoft Project and Primavera.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or equivalent.</li> <li>Bachelor’s degree in engineering, construction technology, or construction management (preferred).</li> <li>Must be able to obtain and maintain a Secret Clearance; note US citizenship is required to obtain a Secret Clearance.</li> <li>Minimum seven (7) years of construction field experience in all phases of civil and building construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience.</li> <li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li> <li>Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li> <li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices.</li> <li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li> <li>An EIT or professional certification/project management certification is desired.</li> <li>Additional knowledge/skills may be required by contract or assignment.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Works in a normal office environment with controlled temperature and lighting conditions.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supervise and control the entire drilling operation activities during the night shift, ensuring the successful completion of the well and drilling activities while liaising closely with Senior Tool Pusher or deputize for the Senior Tool Pusher when required. At all times considering the safety of personnel, the environment, and equipment to maximize drilling operation efficiency.</p><p>Ensures the safety of personnel, equipment, and the efficiency of operations on the drill floor and other drilling operation associated areas. Plans and schedules all drilling and associated activity. Directs personnel towards achieving optimum job performance according to the client s requirements. Ensures any deviation from client well plan (Game Plan) is approved by STP, and that Client representative has documented in written form, and that necessary management of change or deviation is approved in Synergi prior to operation starts. Consult with the STP and Client s Representative regarding the progress of the Drilling program and associated operations, keeping the driller informed about the ongoing drilling program objectives and communicating any changes in plans. Ensure that space-out drawings are correct and are posted in the drillers cabin. Overseeing that post-jarring sheet are filled out and understood by the driller. Relieve the Driller at the Driller s console as operational requirement demands. Ensures that all necessary equipment is ready for the next phase of the Drilling / Workover program and that necessary rig procedures, including JSA and PTW, are prepared on time and with good quality for the actual operations. Assists &amp; supervises drilling crew at the location at all relevant times, ensuring circulating time is sufficient and the well is stable on trips, when the BHA is being worked and whenever there is a hole problem. Operates the drilling unit with strict adherence to company Drilling &amp; Well Control manuals, by reviewing and approving all drilling related work permits.</p><p>Ensure that well control requirements are in place according to operational requirements - assist in supervising well killing operations in any well control situation. Plans &amp; monitors comprehensive well control parameters to proactively identify any signs of well control issues for early detection and swift response. Maintains and regularly tests well control equipment, in accordance with Company s and Client s requirement, ensuring its readiness and effectiveness in critical situations. Perform all well control calculations (i.e., mud weight increase, initial and final circulating pressures, number of strokes, etc.).</p><p>To be part of the Rig s Emergency Response Team as detailed in the Emergency Plan and Company Procedures. Ensure that all personnel are instructed in the procedures to be adopted in the case of an emergency. Ensure that Well Control and general safety drills are held and recorded in accordance with Company requirements.</p><p>Assist STP in ensuring the location has sufficient stock of parts and materials to perform drilling and associated operations as per contractual requirements. Ensure planned maintenance and repair of drilling equipment including draw-works, mud pumps, top drive, rotary table, and BOP are completed and documented to ensure optimum condition and proper availability of required tools. Responsible for housekeeping standards in all drilling areas, sack store and mud pump room.</p><p>Support STP in planning all related rigs move activities, equipment, supplies, personnel in compliance with the Rig move Procedures. Assesses the current and new location, considering factors such as safety, lifting equipment availability at location, preparation for rig-up operations, Supervise the Rig move team during rigging down and rigging up activities to ensure they are followed efficiently and safely.</p><p>Develops and maintains positive working relationships with other department heads, supervisors, operator's representatives, subcontractors, and all personnel on the rig. Responds to client requests and needs concerning materials, equipment, and personnel after getting adequate management approval.</p><p>Maintains proper logs and records, promptly submitting required reports as per company protocols and regulatory standards. Prepare accurate and timely reports, including daily drilling reports, equipment status reports and incident reports, to document drilling activities and operational performance. Review all operational/technical bulletins, communicate pertinent points to crew members and implement all directives as required. Assist STP in initiating, monitoring, and recording all maintenance and repairs work in collaboration with maintenance department.</p><p>Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work. Mentor, develop and train their team to ensure safe and effective operations. Identifies opportunities for skill and career advancement, works to support the professional growth of their team members. Ensure their team receives the necessary required training to perform their duties safely and effectively through on-the-job training, classroom training and participation in safety drills and exercises. Support, promote and actively participate in ADES s Competency Assurance Program for their team. Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive ADVANCE process to formalize a performance management culture.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum education level required: High School or Vocational/Technical Qualification.</p><p>Minimum (8) years of working experience in land drilling and workover operations with contractors with a career history showing time served as Assistant Driller, Driller, and Tool pusher.</p><p>Must have working experience on Onshore rigs.</p><p>Fluent in English (written &amp; spoken).</p><p>PC literate in Microsoft Office</p><p>Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids.</p><p>Leadership, Situation Awareness, Communication, Teamwork, Performance shaping factors stress and fatigue, inspecting work.</p><p>Regularly climbing (stairs, ladders).</p><p>Regularly bending, twisting, and standing.</p><p>Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat etc.).</p><p>Ability to work on day/night shifts.</p><p>As per ADES Training Matrix.</p><p>Valid Well Control (Well Sharp / IADC) Certificate.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of LOGCAP*** The DFAC Supervisor will oversee all Food Services activities as directed by the DFAC Manager. Main areas of concentration will be the oversight of the kitchen operations, food preparation and inventory levels. The Supervisor will oversee scheduling and training of employees. In the absence of DFAC Manager the DFAC Supervisor will be the DFAC POC. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Manage sub-contractors with food preparation, food serving, cashier operations, cleanliness of the dining areas, serving lines, kitchens, temperature danger zones, dishwashing area and storage areas IAW with PWS and SOPs. + Ensure proper cooking techniques are being applied IAW TB Med 530. + Maintain all equipment accountability and serviceability and turn-in and ordering of stock levels. + Manage scheduling and training for the sub-contractor work force ensure compliance with DFAC requirements as PWS. + Direct and ensure that HACCP procedures are followed. + Ensure that all employees are always in compliance with all established Safety Policies and Regulations. + Performs other duties and assignments as required. Qualifications + Minimum Qualifications + Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + Education: High School Diploma; Associates/Bachelors is preferred. + Experience: + At least five years' food service experience in a military Food Services or cafeteria style or multi-entrée operations providing complete meal services (breakfast, lunch and dinner). + At least two years experience as a food service supervisor. + SERV SAFE certified is required. Proficient in the use Microsoft Office products (i.e. Power Point, Word, Excel) + Must be able to obtain and retain a CAC (Common access card) to access government systems + Supervisory/Budget Responsibilities: + Required to Supervise FN work force for all Food Services requirements. Not responsible for any Supervisor Budgets + Skills: + Should be knowledgeable in AFMIS, STORES, inventory control. + HACCP, FM-10-23-2, DA Pam.30-22, AR. 30-22, TB MED 530, AR 40-25, AR 30-21, and U.S Department of Health and Human Services Food Code standards. + Thorough understanding of quality customer food service and preparation of nutritional meals. + Must be able to work under pressure. + Service oriented. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Working Environment: + Environmental Factors: Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Work Week: 48 hours (6 days @ 8 hours a day) is the standard work week. This position requires flexibility in work hours. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>Establish radiation areas for radiographic operations.</p><p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>Perform nondestructive inspection on structures, components, and systems.</p><p>Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>Operate, maintain, and inspect nondestructive equipment.</p><p>Perform operator maintenance and service inspections on shop equipment and tools.</p><p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>Perform silver recovery functions.</p><p>Handle and dispose of hazardous waste and materials.</p><p>Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>